Netgear orporated 16200339 AD7200 Smart WiFi Router User Manual

Netgear Incorporated AD7200 Smart WiFi Router

UserManual.wiki >

Netgear orporated >

16200339 User Manual >

Contents

1. User Manual (Statements) rev
2. User Manual

User Manual

Quick StartNighthawk X10AD7200 Smart WiFi RouterModel R9000Unplug your modem, remove and replace the backup battery if it uses one, and then plug the modem back in. Use the Ethernet cable to connect the modem to the yellow Internet port on the router.Note: If your Internet connection does not require a modem, connect your main Ethernet cable to the yellow Internet port on the router.Connect the router to a power source. The router’s Power LED lights amber and then turns white when the router is ready. Make sure that the router’s WiFi LED is lit. Look on the router’s label for the preassigned WiFi network name (SSID) and network key (password).Open the WiFi connection manager on your WiFi‑enabled computer or mobile device, find the router’s SSID, and use the router’s password to connect to the router’s WiFi network.Launch a web browser. If the installation assistant does not display, visit www.routerlogin.net. If a login window displays, enter admin for the admin user name and password for the admin password.Follow the on‑screen instructions to connect to the Internet.The router’s Internet LED lights white when the router is connected to the Internet.For the best WiFi performance, position the antennas as shown.Package ContentsRouterPower adapter(varies by region)Ethernet cable2. Restart Your Modem and Plug In Your Router3. Connect to the Internet1. Position the Antennas