Netgear orporated 17300394 Arlo Bridge User Manual Arlo Baby Quick Start Guide

Download:
Mirror Download [FCC.gov]
Document ID	3786312
Application ID	Vsp488O+l/hRN1O3K8bdbg==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	147.36kB (1842055 bits)
Date Submitted	2018-03-19 00:00:00
Date Available	2018-03-19 00:00:00
Creation Date	2018-02-08 13:30:23
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2018-02-08 13:31:23
Document Title	Arlo Baby Quick Start Guide
Document Creator	Adobe InDesign CC 13.0 (Windows)
Document Author:	NETGEAR

Arlo Security Light System
Quick Start Guide
DRAFT
What’s Included
Welcome
Arlo Bridge
Wire-Free Smart
Security Light
Thank you for choosing Arlo.
Getting started is easy.
Rechargeable
battery
DRAFT
USB cable
Outdoor
security mount
AC power adapter
(varies by region)
Window
decal
Get the App
Set Up Your Security Light System
Download the Arlo app for your smartphone or tablet by
scanning this QR code or searching for Arlo in the app store.
1.
Launch the Arlo app from your smartphone or tablet.
2.
Create an account or log in.
If you did not set up an Arlo account yet, tap New to Arlo?
and create an account.
If you already use an Arlo account, log in to the app.
arlo.netgear.com
3.
Tap Add Device.
4.
Tap Arlo Security Lights.
5.
Follow the onscreen instructions to add the bridge and each
security light.
Note: If you already use the Arlo app, make sure that you
are using the latest version. To find out if an update is
available, go to the App store and search for Arlo.
DRAFT
Mount Your Security Light
5.
1.
Use the provided screws to
attach the mount to a wall.
2.
Tighten the metal collar on the mount to secure the post.
3.
Screw the security light
onto the threaded post.
4.
Tighten the plastic collar
to secure the light.
Tilt and swivel the light to the position you prefer.
DRAFT
You’re Done!
Charge the Battery
Congratulations! Your Arlo Security Light System is set up and
ready to go.
You can use the USB cable and the AC power adapter to charge
the battery in your security light.
To view useful tutorial videos, find troubleshooting tips, or get
support, visit support.arlo.com.
1.
If you are using the security light outdoors, move it indoors
while you are charging the battery.
The security light and the wall socket must be indoors.
2.
Connect the USB cable to
the security light and to
the AC power adapter.
3.
Plug the AC power adapter
into a wall socket.
The battery charges
automatically.
DRAFT
Power On the Bridge
Insert a Battery Into a Security Light
Before you plug in the bridge for the first time, we recommend
that you follow the instructions in the Arlo app to add your
security light system.
Before you insert the battery for the first time, we recommend
that you follow the instructions in the Arlo app to add your
security light system.
To power on the bridge, plug the bridge into a wall socket.
1.
Unlock the battery compartment cover by pressing and
releasing the back of the security light.
The bridge and the wall socket must be indoors. The prongs on
the bridge vary by region.
2.
Align the battery contacts.
3.
Insert the battery.
4.
Replace the battery
compartment cover.
10
DRAFT
11
Federal Communications Commission (FCC) Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1) this device may not cause harmful interference and
2) this device must accept any interference received, including interference that
may cause undesired operation of the device.
15.21
You are cautioned that changes or modifications not expressly approved by the
part responsible for compliance could void the user’s authority to operate the
equipment.
15.105(b)
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
12
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
1) this device may not cause harmful interference and
2) this device must accept any interference received, including interference that
may cause undesired operation of the device.
FCC RF Radiation Exposure Statement:
1. This Transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
2. This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20 centimeters between the radiator and your body.
Canada, Industry Canada (IC)
This device complies with Industry Canada licence-exempt RSS
standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device
DRAFT
13
Le présent appareil est conforme aux CNR d’Industrie Canada applicables
aux appareils radio exempts de licence
.L’exploitation est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le fonctionnement.
Caution: Exposure to Radio Frequency Radiation.
To comply with RSS 102 RF exposure compliance requirements, a separation
distance of at least 20 cm must be maintained between the antenna of this
device and all persons.
Pour se conformer aux exigences de conformité CNR 102 RF exposition, une
distance de séparation d’au moins 20 cm doit être maintenue entre l’antenne de
cet appareil et toutes les personnes.
CE RED
(a) frequency band(s) in which the radio equipment operates;
(b) maximum radio-frequency power
(c) accessories
(d) software
This equipment should be installed and operated with a minimum distance of 20
cm between the radiator and your body.
14
DRAFT
15
©NETGEAR, Inc., NETGEAR, the NETGEAR Logo, and Arlo are trademarks of
NETGEAR, Inc.
Use of the Works with Apple HomeKit logo means that an electronic accessory
was designed to connect specifically to iPod touch, iPhone, or iPad, respectively,
and is certified by the developer to meet Apple performance standards. Apple is
not responsible for the operation of this device or its compliance with safety and
regulatory standards.
Si ce produit est vendu au Canada, vous pouvez accéder à ce document en
français canadien à arlo.com/docs.
(If this product is sold in Canada, you can access this document in Canadian
French at arlo.com/docs.)
For the current EU Declaration of Conformity, visit
kb.netgear.com/app/answers/detail/a_id/11621/.
For regulatory compliance information, visit netgear.com/about/regulatory/.
350 East Plumeria Drive
San Jose, CA 95134, USA
NETGEAR INTL LTD
Building 3, University Technology Centre
Curraheen Road, Cork, Ireland
PART NUMBER
February 2018
DRAFT

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Has XFA                         : No
Language                        : en-US
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Format                          : application/pdf
Title                           : Arlo Baby Quick Start Guide
Creator                         : NETGEAR
Description                     : Arlo Baby Quick Start Guide
Subject                         : NETGEAR, Apple, Arlo Baby Quick Start Guide, Arlo Baby, Arlo Baby Camera, Arlo Baby Camera Manual, Arlo Baby Camera Installation, ABC1000A
Create Date                     : 2018:02:08 13:30:23-08:00
Metadata Date                   : 2018:02:08 13:31:23-08:00
Modify Date                     : 2018:02:08 13:31:23-08:00
Creator Tool                    : Adobe InDesign CC 13.0 (Windows)
Instance ID                     : uuid:a7a6bb6e-8180-4d2a-93a9-f4cd59ae5d4b
Original Document ID            : xmp.did:F97F11740720681180838502DEE94D73
Document ID                     : xmp.id:76282851-a7ab-a540-b853-39ccdbebe332
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:b1db7708-a7b1-1c49-9e43-605d3e1cd129
Derived From Document ID        : xmp.did:2c8d76a4-5b92-cf4b-8db0-d73ab67a80ea
Derived From Original Document ID: xmp.did:F97F11740720681180838502DEE94D73
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 13.0 (Windows)
History Changed                 : /
History When                    : 2018:02:08 13:30:23-08:00
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Count                      : 9
Author                          : NETGEAR

EXIF Metadata provided by EXIF.tools