Netgear orporated 26200348 AC1900 WiFi Cable Modem Router User Manual rev

Netgear Incorporated AC1900 WiFi Cable Modem Router rev

User Manual rev.pdf

Quick StartNighthawk AC1900 WiFi Cable Modem RouterModel C7000Package ContentsThe box contains the following items.Modem routerEthernet cablePower adapterMarch 2015NETGEAR, Inc.350 East Plumeria DriveSan Jose, CA 95134, USASupportThank you for purchasing this NETGEAR product.Aer installing your device, locate the serial number on the label of your product and use it to register your product at https://my.netgear.com. You must register your product before you can use NETGEAR telephone support. NETGEAR recommends registering your product through the NETGEAR website.For product updates and web support, visit http://support.netgear.com.NETGEAR recommends that you use only the ocial NETGEAR support resources. You can get the user manual online at http://downloadcenter.netgear.com or through a link in the product’s user interface.Trademarks© NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non‑NETGEAR trademarks are used for reference purposes only.ComplianceFor the current EU Declaration of Conformity, visit http://support.netgear.com/app/answers/detail/a_id/11621/. For regulatory compliance information, visit: http://www.netgear.com/about/regulatory/.See the regulatory compliance document before connecting the power supply. C7000v2
2. Connect the power adapter.Connect the power adapter to the modem router and plug the power adapter into an electrical outlet.Wait for the Power LED and the Internet LED to light solid green.3. Connect a computer or WiFi device to the modem router.To connect with WiFi, use the WiFi network name and password on the product label. For a wired connection, use an Ethernet cable to connect a computer to an Ethernet port on the modem router.1. Connect a coaxial cable.Use a coaxial cable that is provided by your cable company to connect the cable port on the modem router to a cable wall outlet or a line splitter.Note: For Xfinity cable Internet service, Comcast Xfinity recommends connecting your modem router to a cable wall outlet.4. Log in to the modem router.Launch a web browser.The modem router menu displays.If you do not see the modem router menu, enter http://routerlogin.net or http://192.168.0.1 in the address field of the web browser.When prompted, enter admin for the user name and password for the password.5. Set up your Internet service.For information about how to set up your Internet service, see “Set Up Your Internet Service” on page 6.Ethernet cableModem routerInternetPower adapterYou can use this diagram to connect your router or follow the detailed instructions in this booklet.
1ContentsLEDs ................................................................................................................................ 2Install Your Modem Router ....................................................................................... 4Set Up Your Internet Service ................................................................................... 6WiFi Network Name and Password ......................................................................... 8Join the WiFi Network ............................................................................................... 9View or Change the Modem Router Settings .................................................... 10Share a USB Drive on the Network.......................................................................11Share a USB Printer ...................................................................................................13NETGEAR genie App .................................................................................................14
2LEDsThe LEDs on the modem router light to indicate modem router activity:Internet LEDDownstream LEDUpstream LED2.4 GHz WiFi LED5 GHz WiFi LEDPower LEDEthernet LEDWiFi On/O button and LEDWPS button and LED
3LED DescriptionPower • Solid green. Power is supplied to the modem router.• O. No power is supplied to the modem router.• Solid red. Thermal cuto mode. Power o the unit, let it cool, and move it away from heat sources (such as a TV, DVD player, or speakers) and keep it vertical in open air.Downstream • Solid amber. One downstream channel is locked.• Solid green. Two or more downstream channels are locked.• Blinking green. The modem router is scanning for a downstream channel.• O. No downstream channel is locked. Upstream • Solid amber. One upstream channel is locked.• Solid green. Two or more upstream channels are locked.• Blinking green. The modem router is scanning for an upstream channel.• O. No upstream channel is locked.Internet • Solid green. The modem router is online.• Blinking green. The modem router is synchronizing with the cable provider’s cable modem termination system (CMTS).• Slow blinking amber and green. The modem router reached the trac meter limit. (For information about the trac meter, see the modem router’s user manual.)• O. The modem router is oine.2.4 GHz WiFi • Solid green. The 2.4 GHz radio is on.• O. The 2.4 GHz radio is o. 5 GHz WiFi • Solid green. The 5 GHz radio is on.• O. The 5 GHz radio is o. Ethernet • Solid green. A device is connected to an Ethernet port and powered on. Ethernet port LEDs for each port are located on the rear panel.• O. No device is connected to an Ethernet port.
4LED DescriptionWiFi On/O button with LEDPressing this button for two seconds turns the WiFi radios in the modem router on and o. If this LED is lit, the WiFi radios are on. If this LED is o, the WiFi radios are turned o and you cannot use WiFi to connect to the modem router. WPS button with LEDThis button lets you use WPS to join the WiFi network without typing the WiFi password. The WPS LED blinks during this process and then lights solid. Install Your Modem Router ¾To install your modem router:1. Connect a coaxial cable.Use a coaxial cable that is provided by your cable company to connect the cable port on the modem router to a cable wall outlet or a line splitter.Note: For Xfinity cable Internet service, Comcast Xfinity recommends connecting your modem router to a cable wall outlet.2. Connect the power adapter to the modem router and plug the power adapter into an electrical outlet.
5Wait for the Power LED and the Internet LED to light solid green.3. Connect a computer or WiFi device to the modem router.To connect with WiFi, use the WiFi network name and password on the product label. For a wired connection, use an Ethernet cable to connect a computer to an Ethernet port on the modem router.4. Launch a web browser and log in to the modem router.The modem router menu displays.If you do not see the modem router menu, enter http://routerlogin.net or http://192.168.0.1 in the address field of the web browser.When prompted, enter admin for the user name and password for the password.5. Set up your Internet service.For more information, see “Set Up Your Internet Service” on page 6.
6Set Up Your Internet ServiceSet up Internet service by using Comcast Xfinity’s self‑activation process. If you are unable to self‑activate your modem router, call Comcast Xfinity customer service. Aer you complete the setup, perform a speed test.Use the Self-Activation Process to Set Up Your Internet ConnectionIBefore you start the self‑activation process, make sure that your account number, account phone number, and login information (your email address or user name and password) are nearby. ¾To set up your Internet connection with Comcast Xfinity’s self-activation process:1. Close all web browsers.2. Launch a web browser.You are redirected to the Xfinity self‑activation page. If you are not redirected to the Xfinity self‑activation page, visit www.comcast.com/activate.3. Provide your Xfinity credentials and complete the self‑activation process.This process might take up to 15 minutes, during which the modem router reboots a couple of times.Call Comcast Xfinity to Set Up Your Internet ConnectionIf you are unable to self‑activate your modem router, call Comcast Xfinity customer service.
7Before you call Comcast Xfinity, make sure that your account number, account phone number, email address, and password are nearby. The modem router’s model number is C7000. The serial number and MAC address are on the product label. ¾To set up your Internet connection by calling Comcast Xfinity:1. Call Comcast Xfinity customer service at 1‑800‑XFINITY (1‑800‑934‑6489).2. When asked, provide your account information and provide the modem router’s model number and MAC address.3. Wait for the Comcast Xfinity representative to confirm that your modem router is active.4. If you do not get an Internet connection with the modem router, ask the Comcast Xfinity representative to look for your modem router online, and do one of the following depending on what the Comcast Xfinity representative tells you about your modem router:• If the modem router is not visible, the Comcast Xfinity representative can give you instructions to verify why the modem router does not connect with your high‑speed Internet service.• If the modem router is visible to the Comcast Xfinity representative, reboot the modem router. Check your online status again.C7000v2.
8WiFi Network Name and PasswordThe preset WiFi network name (SSID) and password (network key) are unique to your modem router, like a serial number. Because the modem router automatically uses WiFi security, you don’t need to set it up. The WiFi settings are on the product label.NETGEAR recommends that you use the preset WiFi settings because you can check the product label if you forget them. NETGEAR genie lets you change these settings. If you do so, write down the new WiFi settings and store them in a safe place. You can write the WiFi settings from your product label in this space for easy reference.WiFi network name (SSID):Network key (password):If you change the WiFi settings, write the new settings here for easy reference and store this booklet in a safe place.WiFi network name (SSID):Network key (password):
9Join the WiFi NetworkYou can either use Wi‑Fi Protected Setup (WPS) or select your WiFi network and type its password. For help with the WPS button on your computer or WiFi device, check the instructions or online help that came with that computer or device. Some older equipment cannot use WPS. ¾To select your network and enter its password:1. Open the soware utility that manages your WiFi connections on the computer or WiFi device that you want to connect to your modem router.This utility scans for WiFi networks in your area.2. Find and select your modem router’s WiFi network name (SSID).The SSID is on the product label.3. Enter the modem router’s password (or your custom password if you changed it) and click the Connect button.The password is on the product label.4. Repeat Step 1 through Step 3 to add other computers or WiFi devices. ¾To join the network using WPS:1. Press the WPS button on the modem router for 3–5 seconds.The WPS LED on the modem router blinks green.2. Within two minutes, on your computer or WiFi device, press its WPS button or click its onscreen WPS button.The WPS LED on the modem router lights solid green when the computer or WiFi device connects to your modem router.3. Repeat this process to add other computers or WiFi devices.
10View or Change the Modem Router SettingsAer you use genie to set up the modem router, you can log in to the modem router to view or change its settings.Log In to the Modem Router ¾To log in to the modem router:1. Connect a computer or WiFi device to the modem router.You can use an Ethernet cable or connect with WiFi: • For a wired connection, use an Ethernet cable to connect your computer to a yellow Ethernet port on your modem router.• To connect with WiFi, select and join your WiFi network.2. Launch a web browser.3. Enter www.routerlogin.net in the address field of the browser.A login screen displays.4. Enter admin for the user name and password for the password. The BASIC Home screen displays.Change the admin Password ¾To change the admin password:1. Launch a web browser.2. Enter www.routerlogin.net in the address field of the browser.A login screen displays.
113. Enter admin for the user name and password for the password. The BASIC Home screen displays.4. Select ADVANCED > Administration > Set Password.5. Type your old password and type the new password twice. 6. Click the Apply button.Your changes are saved.Share a USB Drive on the NetworkReadySHARE lets you access and share a USB drive connected to the modem router USB port. (If your USB drive uses special drivers, it is not compatible.) ¾To access the USB drive from a Windows computer: 1. Insert your USB storage drive into the USB port on the modem router.If your USB drive uses a power supply, you must use it when you connect the USB drive to the modem router.When you connect the USB drive to the modem router USB port, it might take up to two minutes before the modem router
12is ready for sharing. By default, the USB drive is available to all computers on your local area network (LAN).2. Select Start > Run. 3. Enter \\readyshare in the dialog box.4. Click the OK button. ¾To access the USB drive from a Mac: 1. Insert your USB storage drive into the USB port on the modem router.If your USB drive uses a power supply, you must use it when you connect the USB drive to the modem router.When you connect the USB drive to the modem router USB port, it might take up to two minutes before it is ready for sharing. By default, the USB drive is available to all computers on your local area network (LAN).2. Select Go > Connect to Server.3. Enter smb://readyshare as the server address.4. Click the Connect button.
13Share a USB PrinterYou can connect a USB printer to a USB port on the modem router and print wirelessly. ¾To set up ReadySHARE Printer:1. Connect the USB printer to a USB port on the modem router with a USB printer cable.2. On each computer that will share the printer, do the following:a. Install the current USB printer driver soware (available from the printer manufacturer).b. Download the NETGEAR USB Control Center utility from www.netgear.com/readyshare and install it.c. Select the language.3. If prompted, select the printer and click the Connect button for each computer.When the first computer connects, the status changes to Manually connected by xxx.For each computer, when you complete Step 3, the printer status displays as Available.
14NETGEAR genie AppThe free NETGEAR genie app lets you easily monitor, connect, and control your home network from a Windows or Mac computer, tablet, or smartphone. You can share and stream music or videos, diagnose and repair network issues, set up parental controls, and more:• Access your modem router and change its settings or diagnose and repair network issues.• Make a printer AirPrint compatible so that you can print from an iPad or iPhone.• Use MyMedia to find and play media files in your network.• Use Turbo Transfer to quickly send files from your computer or smartphone to another device on the network.• Set up parental controls.• Connect your smartphones and tablets to your home WiFi by scanning the WiFi QR code from genie.Download the free genie app from www.NETGEAR.com/genie.
Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. For operation within 5.15 ~ 5.25GHz frequency range, it is restricted to indoor environment.
Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 29cm between the radiator & your body.

Navigation menu