Netgear Dgnd3700 Quick Start Guide N600 Wireless Dual Band Gigabit ADSL2+ Modem Router Installation

Netgear-Dgnd3700V1-Quick-Start-Guide netgear-dgnd3700v1-quick-start-guide

: Netgear Netgear-Dgnd3700-Quick-Start-Guide netgear-dgnd3700-quick-start-guide netgear pdf

Open the PDF directly: View PDF .
Page Count: 2

ADSL

Phone

Line

Laptop or desktop

computer

Package Contents:

N600 Wireless Dual Band Gigabit ADSL2+

Modem Router DGND3700

Installation Guide

N600 Wireless Modem Router

Phone cable Power adapter

Fiber/Cable modem

Step 1:

Connect to ADSL.

If connecting directly

to a DSL line.

Connect to Ethernet WAN.

If connecting to a

Fiber/Cable modem.

Step 2:

Cable your computer.

Step 3:

Power on your router.

Wait until the 2.4 GHz

Wireless LED turns solid

green.

Note: Add an ADSL filter for every

telephone on the same phone line

as your wireless modem router.

Internet

Internet

Power on/off

N600 Wireless Modem Router

Note: Keep the DGND3700

N600 Wireless Modem Router

in a vertical position.

Connect to Internet with ADSL or Ethernet WAN.

ADSL filter

ADSL

Phone

Line

Phone cable

Ethernet cable

Ethernet cable

“not included”

Power adapter

(installation continued on back page)

N600 Wireless Modem Router

Ethernet cable

2.4 GHz

Wireless LED

December 2010

©2010 by NETGEAR, Inc. All rights reserved. NETGEAR and the NETGEAR logo are registered trademarks of

NETGEAR, Inc. in the United States and/or other countries. Other brand and product names are trademarks or

registered trademarks of their respective holders. Information is subject to change without notice.

This symbol was placed in accordance with the European Union Directive 2002/96 on the Waste

Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the European Union,

this product should be treated and recycled in accordance with the laws of your jurisdiction

implementing the WEEE Directive.

Installation (continued from front page)

Step 4: Set Up Internet Access

1. Open a Web browser, type http://www.routerlogin.net, and click Enter.

2. Enter the router user name admin and

default password password. Click OK.

3. When the main settings screen opens,

you are asked if you want to check for an

update. Click Cancel. You can always

check for new firmware later after you are

connected to the Internet.

4. Select the first menu item on the left: Setup Wizard. Make sure Yes is

selected. Then click Next and follow the prompts to complete the Setup Wizard

and be connected to the Internet.

Note for DSL users: If your DSL ISP requires that you enter a user name or

password, you are prompted to enter this information. If you do not have this

information, contact your DSL ISP.

If using DSL, record your information here:

DSL User Name ______________________________________________

DSL Password _______________________________________________

After connecting to the Internet, check for firmware updates by selecting Router

Upgrade and following the on-screen prompts.

Step 5: Set Up Wireless Security

You should set up secure 2.4 GHz and 5 GHz wireless networks. Once your

wireless security is established, your wireless laptops, gaming devices (such as

Wii or Play Station 3 with wireless), and other wireless equipment can safely and

securely connect to the Internet.

1. From the main menu, select Wireless Settings.*

2. Name your wireless networks. Choose names (SSIDs) that are easy for you

to remember (the default names are NETGEAR and NETGEAR-5G).

3. Select a security method. NETGEAR recommends WPA2-PSK (AES).

4. Enter the passphrases. This example uses HomeNetwork1 and

HomeNetwork2.

Note: Your network names (SSIDs) and passphrases are case-sensitive.

Your network name, security method, and passphrase must be the same for

all the wireless devices connected to your router on a network.

5. Click Apply and close your browser.

*Your router menu might display different or additional

features not shown in this image.

2.4 GHz wireless network setup

5 GHz wireless network setup

Names (SSIDs)

Security

Passphrasesgfd

Connect Wireless Devices to Your Router

Record your wireless information here:

2.4 GHz Wireless Network Name (SSID) _______________________

2.4 GHz Wireless Security Passphrase _________________________

5 GHz Wireless Network Name (SSID) _________________________

5 GHz Wireless Security Passphrase ___________________________

If you do not remember your passphrase, type http://www.routerlogin.net into your

browser and log in by entering the user name admin and the password (the default

is password). Then, select Wireless Settings to retrieve your passphrase.

You can add wireless computers and other equipment to your wireless network:

1. Open the wireless software that manages your wireless connections on the

wireless device (iPhone, laptop computer, gaming device) that you want to

connect to your router.

2. The wireless software scans for all wireless networks in your area. Look for your

network—the one you named when you set up your router. Select it.

3. If you set up security, you are prompted for a passphrase or network key. Enter

the passphrase you selected and click Connect.

If your wireless device supports WPS (Wi-Fi Protected Setup)—NETGEAR calls this

method Push 'N' Connect—you might be prompted to press the WPS button on the

router instead of entering a passphrase. Then:

1. Press the WPS button on the router. It looks similar to .

2. Within 2 minutes, follow the wireless software instructions on the wireless device

to complete the WPS process.

The device will then be connected to your router. Repeat this process to add

other wireless devices.

For complete DoC, visit the NETGEAR EU Declarations of Conformity website at:

http://kb.netgear.com/app/answers/detail/a_id/11621/.

For GNU General Public License (GPL) related information, visit:

http://kbserver.netgear.com/kb_web_files/open_src.asp.