Netgear Gs724At Quick Start Guide GS700AT_IG

: Netgear Netgear-Gs724At-Quick-Start-Guide netgear-gs724at-quick-start-guide netgear pdf

Open the PDF directly: View PDF .
Page Count: 2

Download
Open PDF In Browser	View PDF

)NSTALLATION'UIDE

Next, Connect Your Smart Switch in the
Correct Order

Now, Configure the Switch with the
Smartwizard

These instructions assume you are using DHCP in your network. If you are using static IP
addressing in your network, configure the switch IP address before connecting it to your
network. In the absence of a DHCP server, the switch defaults to 192.168.0.239 for its IP
address.

1.

GS700AT Gigabit Smart Switch

Follow these instructions to set up your smart switch. Before proceeding with the smart
switch installation, familiarize yourself with the contents of the Resource CD, especially
the reference manuals on your Resource CD.

First, Verify Package Contents
•

NETGEAR Smart Switch

•

Rubber footpads for tabletop installation

•

Power cord

•

Rack-mount kit for installing the switch in a 19-inch rack

•

Installation Guide

•

Smart Switch Resource CD with Smartwizard Discovery utility and Hardware
Installation Guide. (A link to the online Software Administration User's Manual is on
the Resource CD.)

•

Warranty/Support Information Card

Click Start > Programs and run Smartwizard.

To configure the switch before connecting it to your network:
1.

Set up the PC with an IP address in the 192.168.0.x subnet, and connect the PC to the
switch. Then, use the SmartWizard Discovery utility to configure the switch.

2.

Connect each PC to an RJ-45 network port on the Switch front panel.
Use category 5 (Cat5) unshielded twisted-pair (UTP) cable terminated with an RJ-45
connector to connect.

Figure 2

2.

Click Discover to find your switch in the network.

Then, Prepare to Install Your Smart Switch
First, prepare a PC with an Ethernet adapter and a CD ROM drive.

Next, Install the Smartwizard Discovery
Utility on a PC

Figure 1

3.

Connect the smart switch to your network.

1.

Insert the Resource CD into your CD drive.

4.

Power on the switch.

2.

Run the Setup program to install the Smartwizard Discovery utility. The Installation
Wizard will guide you through.

5.

Verify that the PC with the Smartwizard Discovery utility is on the same subnet as the
switch.

Figure 3

The Smartwizard Discovery utility finds the switch and displays its MAC Address, IP
Address, and model number. If you cannot configure your switch, verify that the
cable connections are secure, that the IP address configuration of the PC is in the
same subnet as the switch.
3.

Technical Support

.

Thank you for selecting NETGEAR products.
After completing setup and configuration, locate the serial number on the bottom label of
the Smart switch and use it to register your product at
http://www.netgear.com/register.

Click Discover and select the line displaying the details of your switch.
If there are multiple smart switches in your network, ensure you have selected the
correct switch to configure.

4.

Registration on the web site or over the phone is required before you can use our
telephone support service. The phone numbers for worldwide regional customer support
centers are on the Warranty and Support Information card that came with your product.

Click Web Access to view the switch log in screen.

Go to http://www.netgear.com/support for product updates and web support.

Figure 5

Troubleshooting Tips

Figure 4

5.

Enter the default password of password in lower case letters and click Login. The
Main Web Access Menu displays.

Following are some tips for correcting simple problems you may have.
•

Be sure to power on your PC and smart switch in the correct sequence.

•

Follow this sequence. Turn off the smart switch and computer. First, turn on the smart
switch and wait two minutes. Next turn on the computer.

Ensure the Ethernet cables are securely plugged in.
•

For each powered on computer connected to the smart switch with a securely plugged
in Ethernet cable, the corresponding smart switch LAN port status light will be lit.

Ensure the network settings of the computer are correct.
•

January 2008

In most cases, computers should be configured to obtain an IP address automatically
via DHCP. For help with this, please see the animated tutorials on the CD or the
Reference Manual Appendix C on the CD. If your network uses static IP addresses,
be sure the switch and computer are configured with valid IP addresses.

This symbol was placed in accordance with the European Union Directive
2002/96 on the Waste Electrical and Electronic Equipment (the WEEE
Directive). If disposed of within the European Union, this product should be
treated and recycled in accordance with the laws of your jurisdiction
implementing the WEEE Directive.
© 2007 by NETGEAR, Inc. All rights reserved. NETGEAR and the NETGEAR logo are registered trademarks
of NETGEAR, Inc. in the United States and/or other countries. Other brand and product names are trademarks or
registered trademarks of their respective holders. Information is subject to change without notice.



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-702
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Create Date                     : 2008:01:14 18:38:23-08:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2008:01:14 18:41-08:00
Metadata Date                   : 2008:01:14 18:41-08:00
Format                          : application/pdf
Title                           : GS700AT_IG.fm
Creator                         : bduvall
Document ID                     : uuid:cee9b1b5-09ad-4d60-b0a3-3daa295f4a7b
Instance ID                     : uuid:a48d92ca-3336-4b34-b695-b4de52b54af6
Page Count                      : 2
Author                          : bduvall

EXIF Metadata provided by EXIF.tools