Netgear Gs724Tp Owner S Manual

2014-07-06

• GS700TP Smart Switch Software Administration Manual
• Contents
• About This Manual
  • Who Should Use this Book
  • How to Use This Book
  • Conventions, Formats, and Scope
  • How to Use This Manual
  • How to Print this Manual
  • Revision History
• Chapter 1 Getting Started with Switch Management
  • System Requirements
  • Switch Management Interface
  • Network with a DHCP Server
  • Network without a DHCP Server
    • Manually Assigning Network Parameters
    • NIC Setting on the Host that Accesses the GS700TP Gigabit PoE Smart Switch
  • Web Access
  • Additional Utilities
    • Password Change
    • Firmware Upgrade
    • Exit
• Chapter 2 Introduction to the Web Browser Interface
  • Logging Into the NETGEAR Home Screen
    • The Navigation Menu
  • Using the NETGEAR Web Management System Options
    • Device Management Buttons
    • Informational Services
      • Help Navigation Tab
      • Accessing Device Information
    • Using Screen and Table Options
      • Selecting an Entry
      • Adding an Entry
      • Modifying an Entry
      • Deleting an Entry
      • Special Table Options
        • Gold Buttons
        • Quick Boxes
        • Interface View and Selection
• Chapter 3 Managing System Settings
  • Using the System Settings Utility
  • Management
    • System Information
    • IP Configuration
    • Time
      • Time Configuration
      • SNTP Server Configuration
  • Device View
  • PoE
    • Basic
      • PoE Configuration
    • Advanced
      • PoE Configuration
      • PoE Port Configuration
  • SNMP
    • SNMPv1/v2
      • Community Configuration
      • Trap Configuration
    • SNMPv3
      • Engine ID
      • View Name
      • View Content
      • Community Configuration
      • Group Configuration
      • User Configuration
      • Global Trap Configuration
      • Trap Configuration
      • Trap Filter Name
      • Trap Filter Content
  • LLDP
    • Basic
      • LLDP Configuration
    • Advanced
      • LLDP Configuration
      • LLDP Port Settings
      • LLDP-MED Network Policy
      • LLDP-MED Port Settings
      • Local Information
      • Neighbors Information
• Chapter 4 Configuring Switching Settings
  • Configuring Switching Settings
  • Ports
    • Port Configuration
  • LAG
    • Basic
      • LAG Configuration
      • LAG Membership
    • Advanced
      • LAG Configuration
      • LAG Membership
      • LACP Configuration
      • LACP Port Configuration
  • VLAN
    • Basic
      • VLAN Configuration
    • Advanced
      • VLAN Configuration
      • VLAN Membership
      • Port PVID Configuration
  • Voice VLAN
    • Basic
      • Properties
    • Advanced
      • Properties
    • Port Setting
    • OUI
  • STP
    • Basic
      • STP Configuration
    • Advanced
      • STP Configuration
      • CST Configuration
      • CST Port Configuration
      • Rapid STP
  • Multicast
    • Basic
      • IGMP Snooping Configuration
    • Advanced
      • IGMP Snooping Configuration
      • Multicast Group Configuration
      • Multicast Group Membership
      • Multicast Forward All
  • Address Table
    • Basic
      • Address Table
    • Advanced
      • Static Addresses
      • Dynamic Addresses
      • Address Table
• Chapter 5 Configuring QoS
  • Configuring the Basic and Advanced QoS Settings
  • CoS
    • Basic
      • CoS Global Configuration
      • CoS Interface Configuration
      • Queue
      • Bandwidth
    • Advanced
      • CoS to Queue Mapping
      • DSCP to Queue Mapping
• Chapter 6 Managing Security
  • Setting Security Configuration Options
  • Management Security
    • User Configuration
      • Change Password
    • RADIUS
      • Authentication Server Configuration
      • Accounting Server Configuration
    • TACACS+
    • Authentication List
  • Port Authentication
    • Basic
      • 802.1X Configuration
    • Advanced
      • 802.1X Configuration
      • Port Authentication
  • Traffic Control
    • Storm Control
    • Port Security
  • ACL
    • MAC ACL
    • MAC Rules
    • MAC Binding Configuration
    • IP ACL
    • IP Rules
    • IP Binding Configuration
    • Binding Table
• Chapter 7 Monitoring the Switch
  • Setting Monitoring Options
  • Logs
    • Logs Configuration
    • Log Filter
    • Memory Log
    • Flash Log
    • Server Log
  • RMON
    • Basic
      • Statistics
    • Advanced
      • Statistics
      • History Control
      • History Table
      • Events Control
      • Events Log
      • Alarms
  • Port Mirroring
    • Port Mirroring
• Chapter 8 Maintenance
  • Using the Maintenance Options
  • Reset
    • Device Reboot
    • Factory Default
  • Upload
    • Upload
  • Download
    • Download
  • File Management
    • Active Image
  • Troubleshooting
    • Diagnostics
      • Cable Test
• Chapter 9 Online Help
  • Online Help
  • Support
  • User Guide
• Appendix A Default Settings
• Index