Netgear Mbr1515 Installation Guide 4G LTE Mobile Broadband N300 WiFi Router

: Netgear Netgear-Mbr1515-Installation-Guide-655633 netgear-mbr1515-installation-guide-655633 netgear pdf

Open the PDF directly: View PDF .
Page Count: 2

Step 1: Prepare the router.

Step 1A: Install the antennas. Locate the router where you have a good 4G

wireless signal, such as near a window.

Step 3: Connect

to a computer.

Ethernet cable

Power adapter

Wireless router

Installation Guide

SIM card

Front and Rear Views

Step 2: Connect to the Internet.

Step 4: Connect the power.

Antennas

Step 1B: Ensure that the SIM card is present.

(Optional)*

*Note: Optional Ethernet connection is needed only if 4G is used as the backup connection.

Activated SIM card

from authorized

Verizon Wireless dealer

Connection can

be Ethernet or

wireless WiFi.

4G LTE Mobile Broadband N300 WiFi Router

MBR1515

October 2012

NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of

NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to change

without notice. Other brand and product names are registered trademarks or trademarks of their respective

holders. © 2012 NETGEAR, Inc. All rights reserved.

This symbol was placed in accordance with the European Union Directive 2002/96 on the Waste

Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the European Union,

this product should be treated and recycled in accordance with the laws of your jurisdiction

implementing the WEEE Directive.

Router Setup

The router is preinstalled with an active SIM card and works out of the box. No setup

is required for a 4G connection. 4G LTE connection and signal strength are

indicated by two LEDs on the front of the device.

You can configure the router to use Ethernet as the primary and 4G as the fallback

broadband connection.

To configure Ethernet as the broadband connection:

1. Using a web browser, log in to the

router’s user interface by typing the

address www.routerlogin.com.

2. Enter the user name admin and

default password password to open

the router’s main settings screen.

3. Click Broadband Settings to

configure a broadband connection

mode.

Preset Wireless Security

This product has a preset unique Wifi network name (SSID) and WPA/WPA2-PSK

passphrase that are located on the label on the bottom of the product. The default

SSID and passphrase are uniquely generated for every device to protect and

maximize your wireless security.

Blue 4G LTE signal

Off No signal

Blue High

Green Medium

Amber Low

Off No signal

NETGEAR recommends that you do not change the WiFi network name (SSID)

or WPA/WPA2-PAK passphrase. If you change these settings during the

installation process, the information on the bottom of the product does not apply.

FAQs

•For a strong Internet connection, where should I locate my mobile broadband

router?

For Internet coverage, check with your ISP to find out what its service areas

are. For better 4G broadband signal strength, place the unit near a window.

•How do I join the router’s wireless (WiFi) network?

-Open the wireless software that manages your wireless connections on

the wireless device (iPhone®, laptop computer, gaming device) that you

want to connect to your router.

-The wireless software scans for all wireless networks in your area. Look

for your WiFi network—the SSID and passphrase are preconfigured and

are printed on bottom of your router.

-Select your WiFi network, and connect.

-For a WPS (Wi-Fi Protected Setup) connection—NETGEAR calls this

Push 'N' Connect—press the WPS button on the router. It looks like

. Within 2 minutes, follow the software instructions on your WiFi

device to complete the WPS process.

Troubleshooting

What should I do if the router does not connect to the Internet?

• Check with your ISP to ensure that there is good coverage in the area.

• Ensure that your mobile broadband account is active.

• Ensure that the SIM card is inserted properly into the router.

• Locate the router near the window or other area of the building.

The router Internet LED is lit, but I cannot access the Internet using WiFi.

• Check your WiFi connection.

• For help with troubleshooting WiFi connections, log in to the router menu using

Ethernet and click the link to the online user manual.

Technical Support

After installing your device, locate the serial number on the label of your product and

use it to register your product at https://my.netgear.com.

You must register your product before you can use NETGEAR telephone support.

NETGEAR recommends registering your product through the NETGEAR web site.

For product updates and web support, visit http://support.netgear.com. For telephone

support, call 1-888-NETGEAR or 1-888-638-4327.

NETGEAR recommends that you use only the official NETGEAR support resources.

You can get the user manual online at http://downloadcenter.netgear.com or through

a link in the product’s user interface.

WARNING: Do not stack equipment or place equipment in tight spaces, in drawers,

or on carpets. Make sure your equipment is surrounded by at least 2 inches (5 cm) of

air space.