Netgear Modem Fvs318N Users Manual ProSafe Wireless N 8 Port Gigabit VPN Firewall

2015-01-24

• ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
• Contents
• 1. Introduction
  • What Is the ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N?
  • Key Features and Capabilities
    • Wireless Features
    • Advanced VPN Support for Both IPSec and SSL
    • A Powerful, True Firewall
    • Security Features
    • Autosensing Ethernet Connections with Auto Uplink
    • Extensive Protocol Support
    • Easy Installation and Management
    • Maintenance and Support
  • Package Contents
  • Hardware Features
    • Front Panel
    • Rear Panel
    • Bottom Panel with Product Label
  • Choose a Location for the Wireless VPN Firewall
  • Log In to the Wireless VPN Firewall
  • Web Management Interface Menu Layout
  • Requirements for Entering IP Addresses
• 2. IPv4 and IPv6 Internet and Broadband Settings
  • Internet and WAN Configuration Tasks
    • Tasks to Set Up an IPv4 Internet Connection to Your ISP
    • Tasks to Set Up an IPv6 Internet Connection to Your ISP
  • Configure the IPv4 Internet Connection and WAN Settings
    • Configure the IPv4 WAN Mode
    • Let the Wireless VPN Firewall Automatically Detect and Configure an IPv4 Internet Connection
    • Manually Configure an IPv4 Internet Connection
    • Configure Dynamic DNS
  • Configure the IPv6 Internet Connection and WAN Settings
    • Configure the IPv6 Routing Mode
    • Use a DHCPv6 Server to Configure an IPv6 Internet Connection
    • Configure a Static IPv6 Internet Connection
    • Configure a PPPoE IPv6 Internet Connection
    • Configure 6to4 Automatic Tunneling
    • Configure ISATAP Automatic Tunneling
    • View the Tunnel Status and IPv6 Addresses
    • Configure Stateless IP/ICMP Translation
  • Configure Advanced WAN Options and Other Tasks
  • Additional WAN-Related Configuration Tasks
    • Verify the Connection
  • What to Do Next
• 3. LAN Configuration
  • Manage IPv4 Virtual LANs and DHCP Options
    • Port-Based VLANs
    • Assign and Manage VLAN Profiles
    • VLAN DHCP Options
    • Configure a VLAN Profile
    • Configure VLAN MAC Addresses and LAN Advanced Settings
  • Configure IPv4 Multihome LAN IP Addresses on the Default VLAN
  • Manage IPv4 Groups and Hosts (IPv4 LAN Groups)
    • Manage the Network Database
    • Change Group Names in the Network Database
    • Set Up DHCP Address Reservation
  • Manage the IPv6 LAN
    • DHCPv6 Server Options
    • Configure the IPv6 LAN
    • Configure the IPv6 Router Advertisement Daemon and Advertisement Prefixes for the LAN
  • Configure IPv6 Multihome LAN IP Addresses on the Default VLAN
  • Enable and Configure the DMZ Port for IPv4 and IPv6 Traffic
    • DMZ Port for IPv4 Traffic
    • DMZ Port for IPv6 Traffic
    • Configure the IPv6 Router Advertisement Daemon and Advertisement Prefixes for the DMZ
  • Manage Static IPv4 Routing
    • Configure Static IPv4 Routes
    • Configure the Routing Information Protocol
    • IPv4 Static Route Example
  • Manage Static IPv6 Routing
• 4. Wireless Configuration and Security
  • Overview of the Wireless Features
    • Wireless Equipment Placement and Range Guidelines
  • Configure the Basic Radio Settings
    • Operating Frequency (Channel) Guidelines
  • Wireless Data Security Options
  • Wireless Security Profiles
    • Before You Change the SSID, WEP, and WPA Settings
    • Configure and Enable Wireless Profiles
    • Restrict Wireless Access by MAC Address
    • View the Status of a Wireless Profile
    • Configure Wi-Fi Protected Setup
  • Configure Advanced Radio Settings
  • Test Basic Wireless Connectivity
• 5. Firewall Protection
  • About Firewall Protection
    • Administrator Tips
  • Overview of Rules to Block or Allow Specific Kinds of Traffic
    • Outbound Rules (Service Blocking)
    • Inbound Rules (Port Forwarding)
    • Order of Precedence for Rules
  • Configure LAN WAN Rules
    • Create LAN WAN Outbound Service Rules
    • Create LAN WAN Inbound Service Rules
  • Configure DMZ WAN Rules
    • Create DMZ WAN Outbound Service Rules
    • Create DMZ WAN Inbound Service Rules
  • Configure LAN DMZ Rules
    • Create LAN DMZ Outbound Service Rules
    • Create LAN DMZ Inbound Service Rules
  • Examples of Firewall Rules
    • Examples of Inbound Firewall Rules
    • Examples of Outbound Firewall Rules
  • Configure Other Firewall Features
    • Attack Checks
    • Set Limits for IPv4 Sessions
    • Manage the Application Level Gateway for SIP Sessions
  • Services, Bandwidth Profiles, and QoS Profiles
    • Add Customized Services
    • Create Bandwidth Profiles
    • Preconfigured Quality of Service Profiles
  • Configure Content Filtering
  • Set a Schedule to Block or Allow Specific Traffic
  • Enable Source MAC Filtering
  • Set Up IP/MAC Bindings
  • Configure Port Triggering
  • Configure Universal Plug and Play
• 6. Virtual Private Networking Using IPSec and L2TP Connections
  • Use the IPSec VPN Wizard for Client and Gateway Configurations
    • Create an IPv4 Gateway-to-Gateway VPN Tunnel with the Wizard
    • Create an IPv6 Gateway-to-Gateway VPN Tunnel with the Wizard
    • Create an IPv4 Client-to-Gateway VPN Tunnel with the Wizard
  • Test the Connection and View Connection and Status Information
    • Test the NETGEAR VPN Client Connection
    • NETGEAR VPN Client Status and Log Information
    • View the Wireless VPN Firewall IPSec VPN Connection Status
    • View the Wireless VPN Firewall IPSec VPN Log
  • Manage IPSec VPN Policies
    • Manage IKE Policies
    • Manage VPN Policies
  • Configure Extended Authentication (XAUTH)
    • Configure XAUTH for VPN Clients
    • User Database Configuration
    • RADIUS Client and Server Configuration
  • Assign IPv4 Addresses to Remote Users (Mode Config)
    • Mode Config Operation
    • Configure Mode Config Operation on the Wireless VPN Firewall
    • Configure the ProSafe VPN Client for Mode Config Operation
    • Test the Mode Config Connection
    • Modify or Delete a Mode Config Record
  • Configure Keep-Alives and Dead Peer Detection
    • Configure Keep-Alives
    • Configure Dead Peer Detection
  • Configure NetBIOS Bridging with IPSec VPN
  • Configure the L2TP Server
    • View the Active L2TP Users
• 7. Virtual Private Networking Using SSL Connections
  • SSL VPN Portal Options
  • Overview of the SSL Configuration Process
  • Create the Portal Layout
  • Configure Domains, Groups, and Users
  • Configure Applications for Port Forwarding
    • Add Servers and Port Numbers
    • Add a New Host Name
  • Configure the SSL VPN Client
    • Configure the Client IP Address Range
    • Add Routes for VPN Tunnel Clients
  • Use Network Resource Objects to Simplify Policies
    • Add New Network Resources
    • Edit Network Resources to Specify Addresses
  • Configure User, Group, and Global Policies
    • View Policies
    • Add an IPv4 or IPv6 SSL VPN Policy
  • Access the New SSL Portal Login Screen
  • View the SSL VPN Connection Status and SSL VPN Log
• 8. Manage Users, Authentication, and VPN Certificates
  • The Wireless VPN Firewall’s Authentication Process and Options
  • Configure Authentication Domains, Groups, and Users
    • Configure Domains
    • Configure Groups
    • Configure User Accounts
    • Set User Login Policies
    • Change Passwords and Other User Settings
  • Manage Digital Certificates for VPN Connections
    • VPN Certificates Screen
    • Manage VPN CA Certificates
    • Manage VPN Self-Signed Certificates
    • Manage the VPN Certificate Revocation List
• 9. Network and System Management
  • Performance Management
    • Bandwidth Capacity
    • Features That Reduce Traffic
    • Features That Increase Traffic
    • Use QoS and Bandwidth Assignment to Shift the Traffic Mix
    • Monitoring Tools for Traffic Management
  • System Management
    • Change Passwords and Administrator and Guest Settings
    • Configure Remote Management Access
    • Use the Command-Line Interface
    • Use a Simple Network Management Protocol Manager
    • Manage the Configuration File
    • Configure Date and Time Service
• 10. Monitor System Access and Performance
  • Enable the WAN Traffic Meter
  • Configure Logging, Alerts, and Event Notifications
    • How to Send Syslogs over a VPN Tunnel between Sites
  • View Status Screens
    • View the System Status
    • View the VPN Connection Status and L2TP Users
    • View the VPN Logs
    • View the Port Triggering Status
    • View the WAN Port Status
    • View the Attached Devices and the DHCP Log
    • View the Status of a Wireless Profile
  • Diagnostics Utilities
    • Send a Ping Packet
    • Trace a Route
    • Look Up a DNS Address
    • Display the Routing Tables
    • Capture Packets in Real Time
    • Reboot the Wireless VPN Firewall Remotely
• 11. Troubleshooting
  • Basic Functioning
    • Power LED Not On
    • Test LED Never Turns Off
    • LAN or WAN Port LEDs Not On
  • Troubleshoot the Web Management Interface
  • When You Enter a URL or IP Address, a Time-Out Error Occurs
  • Troubleshoot the ISP Connection
  • Troubleshooting the IPv6 Connection
  • Troubleshoot a TCP/IP Network Using a Ping Utility
    • Test the LAN Path to Your Wireless VPN Firewall
    • Test the Path from Your Computer to a Remote Device
  • Restore the Default Configuration and Password
  • Address Problems with Date and Time
  • Access the Knowledge Base and Documentation
• A. Default Settings and Technical Specifications
  • Factory Default Settings
  • Physical and Technical Specifications
• B. Two-Factor Authentication
  • Why Do I Need Two-Factor Authentication?
    • What Are the Benefits of Two-Factor Authentication?
    • What Is Two-Factor Authentication?
  • NETGEAR Two-Factor Authentication Solutions
• C. Notification of Compliance (Wired)
• D. Notification of Compliance (Wireless)
• Index