Netgear Mp101 Users Manual HR314 Qcard

Netgear-Mp101-Installation-Guide-655407 netgear-mp101-installation-guide-655407

Netgear-Mp101-Quick-Start-Guide netgear-mp101-quick-start-guide

MP101 mp101_install_guide

MP101 to the manual 25720db4-4aa8-4b14-8259-87fbb234629e

: Netgear Netgear-Mp101-Users-Manual-332250 netgear-mp101-users-manual-332250 netgear pdf

Open the PDF directly: View PDF .
Page Count: 2

Start Here

Follow these instructions to set up your router.

Verify That Basic Requirements Are Met

Assure that you have the following:

• Network: A Wireless (802.11b or 802.11g) or Ethernet network

• Computer: One or more computers running Windows 98SE, 2000, ME or XP

Have your Ethernet or wireless network settings handy.

First, Install the Music Player Software

Warning: PC firewall software can prevent the music server from communicating with

the MP101 Wireless Digital Music Player. Consult the server software online help for full

details about firewall settings.

1. Power on your computer and log in as needed.

2. Insert the Wireless Digital Music Player Resource CD into your CD-ROM drive. The

CD main page will load.

•Install the MP101 server software to play music stored on your computers.

•Install the RHAPSODY™server software to take advantage of a 30-day free trial

to play music from their vast collection of recordings.

3. Follow the InstallShield Wizard steps, click Finish when done, and restart your

computer as needed.

4. Run the Netgear music server software and have it scan your hard drive to locate

your music files. Consult the Reference Manual on the Wireless Digital Music Player

Resource CD for full instructions on cataloging your collection of music in the server.

Next, Connect the MP101

Note: The MP101 will not work unless the music server you just installed or an Internet

service such as RHAPSODY sends it music.

1. Connect the provided RCA cable from the MP101 Wireless Digital Music Player to

your audio system.

2. Connect the MP101 to your network.

Note: The MP101 is set from the factory to automatically receive its network settings

via DHCP. If DHCP is not running on your network, you will have to set up the IP

address of the MP101 in the range of addresses on your network.

•For Ethernet networks, connect via the Ethernet port.

•For wireless networks, use the remote to browse the Network Setup menu to the

Wireless selection. Choose your wireless network and, if you are using WEP,

configure those settings.

Note: If the MP101 finds only one wireless network, it automatically selects that

one. Also, if the MP101 does not connect to a wireless network, you may have

to power cycle it before trying again. Refer to the troubleshooting tips in this

document or the Reference Manual on the Wireless Digital Music Player Resource

CD to resolve connectivity problems.

Play Music from Your PC or the Internet

1. Once the MP101 is connected to your network, it will also connect to the music

server you installed earlier.

2. Use the remote to navigate through the LCD menus to select music to play.

Installation Guide

AUX DVD VIDEO2

CD/SACD MD/TAPE VIDEO1 SPEAKERS

AC OUTLET

ANTENNA

DIGITAL

MP101 Wireless Digital Music Player Receiver

Line

Out

Audio

Out

Ethernet

LR

Digital Music Player MP101

SERIAL

Power

7.5VDC, 1.0A

Reset

MP101 Wireless Digital Music Player

Digital Music Player MP101

digital 5

MP101 Wireless Digital

Music Player

Desktop PC

with music files

WGT624 Wireless Firewall Router

Broadband

Modem

Internet

Troubleshooting Tips

Here are some tips for correcting simple problems that prevent you from connecting to

the Internet or connecting to the music player.

Make sure the wireless settings in the MP101 and your wireless

access point match exactly.

•The Wireless Network Name (SSID) and WEP settings of the MP101 and wireless

access point must match exactly.

Be sure to restart your network in the correct sequence.

•Restart the music server software, then the music player.

Make sure the Ethernet cables are securely plugged in.

•For each powered on computer with music server software installed, as well as the

music player, be sure the Ethernet cables are securely plugged in.

Make sure the network settings are correct.

•Ethernet and wireless MP101 connections must obtain an IP address automatically

via DHCP. Refer to the Reference Manual on the Wireless Digital Music Player

Resource CD if your network settings are different.

*M-10191-02*

M-10191-02 January 2004

©2004 NETGEAR, Inc. NETGEAR, the Netgear logo, The Gear Guy and Everybody's connecting are

trademarks or registered trademarks of Netgear, Inc. in the United States and/or other countries. RHAPSODY is

a trademark of RealNetworks, Inc. Other brand and product names are trademarks or registered trademarks of

their respective holders. Information is subject to change without notice. All rights reserved.

Technical Support

PLEASE REFER TO THE SUPPORT INFORMATION CARD THAT SHIPPED

WITH YOUR PRODUCT.

By registering your product at www.NETGEAR.com/register, we can provide you with

faster expert technical support and timely notices of product and software upgrades.

Attention: When you configure the wireless settings of the device

please make sure to select the correct country settings. Due to

EU-law the country settings must be identical to the country, where

the device is operating (important due to non-harmonized frequencies in the EU).

802.11b Restrictions: European standards dictate maximum radiated transmit power of 100

mW EIRP and frequency range of 2.400 – 2.4835 GHz. In France, the equipment mustbe

restricted to the 2.4465 – 2.4835 GHz frequency range and must be restricted to indoor use.

!

0560