Netgear Wg121 Installation Guide Install
Netgear-Wg121-Quick-Start-Guide netgear-wg121-quick-start-guide
2015-03-12
: Netgear Netgear-Wg121-Installation-Guide-655282 netgear-wg121-installation-guide-655282 netgear pdf
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
WG121 Install Guide.qxd 8/28/03 4:27 PM Page 1 Note: If this page does not automatically load, browse to the CD and doubleclick on autorun.exe. 54 Mbps Wireless USB 2.0 Adapter WG121 These basic setup instructions assume that you will connect to an access point using no security options. Please refer to the online help and the User’s Guide on the 54 Mbps Wireless USB 2.0 Adapter Resource CD for instructions on configuring security, Ad-Hoc mode, or advanced options. Estimated Completion Time: 5-15 minutes. to open the Smart Wizard Wireless Utility. c. Click the Install Driver & Utility link. d. Follow the InstallShield Wizard steps, and click Finish. If prompted to restart your computer, do so. install the WG121 54 Mbps Wireless 2 Next, USB 2.0 Adapter a. Minimum System Requirements Connect the USB cable to the WG121 and plug the other end of the cable in to a USB port on your PC. After a short delay, the Found New Hardware Wizard displays. Before installing the NETGEAR 54 Mbps Wireless USB 2.0 Adapter WG121, please make sure that your computer system has the following: • A Windows PC with a USB port. • Windows® 98/ME/2000/XP. Some versions of Windows will ask for the Windows Installation CD-ROM during installation. • At least 5 Megabytes disk space. Windows XP Basic Installation install the WG121 software 1 First, a. Power on your PC, let the operating system boot up completely, Follow the InstallShield Wizard steps, and click Finish. If prompted to restart your computer, do so. You will see the WG121 system tray icon on the lower right portion of the Windows task bar. configure your WG121 and save the profile 3 Now, a. Click the WG121 icon in the Windows system tray Installation Guide Follow these steps to install your WG121. c. Note: If a Windows XP logo testing warning message appears, click Continue Anyway to proceed. b. You will be prompted to enable the NETGAR Smart Wizard Wireless Utility. The utility opens to the Settings tab page. b. Change the Network Name SSID to match your network. Tip: To view the available wireless networks, use the dropdown list or the Networks tab and choose the one you want. c. Click Apply to activate the connection. Tip: Create work and home profiles. Then, activate whichever one you need for your current location. verify wireless network connectivity 4 Finally, a. Verify that the status monitor information at the bottom of the utility matches your wireless network. and log in as needed. b. Insert the 54 Mbps Wireless USB 2.0 Adapter Resource CD for the WG121 into your CD-ROM drive. The CD main page shown will load. Click Yes to accept this option. If you choose No, read the Windows XP documentation for an explantion of how to use the Windows XP wireless network configuration utility. b. Check with WG121 LEDs: both lights on indicates a good connection; if the right light is on and the left light is blinking, it means attempting to connect; and if both lights are off, it means the adapter is not plugged in. c. Verify connectivity to the Internet or network resources. Note: If you are unable to connect, see the troubleshooting tips in the Basic Installation section of the User’s Guide on the 54 Mbps Wireless USB 2.0 Adapter Resource CD. WG121 Install Guide.qxd 8/28/03 4:27 PM Page 4 Windows 2000, Me or 98 Basic Installation b. Technical Support install the WG121 software 1 First, a. Power on your notebook, let the operating system boot up Follow the InstallShield Wizard steps, and click Finish. If prompted to restart your computer, do so. c. You will now see the WG121 system tray icon in the lower right portion of the Windows task bar. PLEASE REFER TO THE SUPPORT INFORMATION CARD THAT SHIPPED WITH YOUR PRODUCT. completely, and log in as needed. b. Insert the 54 Mbps Wireless USB 2.0 Adapter Resource CD for the WG121 into your CD-ROM drive. The CD main page shown below will load. configure your WG121 and save the profile 3 Now, a. Click the WG121 icon in the Windows system tray to open the Smart Wizard Wireless Utility. Note: If this page does not automatically load, browse to the CD and double-click on autorun.exe. Click the Install Driver & Utility link. d. Follow the InstallShield Wizard steps, click Finish. If prompted to restart your computer, do so. install the WG121 54 Mbps Wireless 2 Next, USB 2.0 Adapter Connect the USB cable to the WG121 and plug the other end of the cable in to a USB port on your PC. Note: If Windows 2000 displays a Digital Signature Not Found warning, click Yes to continue the installation. Support Information Phone: 1-888-NETGEAR (For US & Canada only) - 24 x7 phone support See Support information card for other countries. E-mail: support@NETGEAR.com (24 x 7 online support) www.NETGEAR.com b. c. August 2003 Click Apply to activate the connection. Tip: Create work and home profiles. Then, activate whichever one you need for your current location. verify wireless network connectivity 4 Finally, a. Verify that the status monitor information at the bottom of the utility matches your wireless network c. *M-10205-01* Change the Network Name SSID to match your network. Tip: To view the available wireless networks, use the dropdown list or the Networks tab and choose the one you want. b. M-10205-01 NETGEAR, INC. The utility opens to the Settings tab page. c. a. By registering your product at www.NETGEAR.com/register, we can provide you with faster expert technical support and timely notices of product and software upgrades. Check with WG121 LEDs: both lights on indicates a good connection; if the right light is on and the left light is blinking, it means attempting to connect; and if both lights are off, it means the adapter is not plugged in. Verify connectivity to the Internet or network resources Note: If you are unable to connect, see the troubleshooting tips in the Basic Installation section of the User’s Guide on the 54 Mbps Wireless USB 2.0 Adapter Resource CD. Attention: This product is certified for Switzerland and all EU-countries. ©2003 NETGEAR, Inc. NETGEAR, the Netgear logo, The Gear Guy. Everybody’s Connecting and Auto Uplink are trademarks or registered trademarks of Netgear, Inc. in the United States and/or other countries. Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries. Other brand and product names are trademarks or registered trademarks of their respective holders. Information is subject to change without notice. All rights reserved.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Create Date : 2003:08:28 16:28:13 Producer : Acrobat Distiller 4.0 for Macintosh Author : Rich Creator : QuarkXPressª 4.11: AdobePS 8.5.1 Title : WG121 Install Guide.qxd Modify Date : 2003:08:28 16:28:42-07:00 Page Count : 2EXIF Metadata provided by EXIF.tools