Netgear Wnda3100V3 Installation Guide N600 WiFi USB Adapter Quick Start
WNDA3100v3 to the manual a9280383-0a15-445a-ae72-57a5c5dc88d9
2015-03-12
: Netgear Netgear-Wnda3100V3-Installation-Guide-655369 netgear-wnda3100v3-installation-guide-655369 netgear pdf
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
Quick Start If the Resource CD screen does not display, browse the files on the CD and double-click the Autorun.exe file. The NETGEAR Resource CD screen displays. 2. Click the Setup button. The Software Update Check screen displays. 3. Install the setup software using one of the following methods. • Connected to the Internet. If you are connected to the Internet, click the Check for Updates button. After the software checks for updates, the Update Check Complete screen displays. Click the Continue button. The Welcome screen displays. N600 WiFi USB Adapter Model WNDA3100v3 Package Contents Adapter Plastic cradle To use the adapter with the USB cable and plastic cradle: a. Place a fastener on the back of the plastic cradle and place another fastener on your computer. Make sure that the surfaces on which you are placing the fasteners are clean and dry. • Not connected to the Internet. If you are not connected to the Internet, click the Install from CD button. The Welcome screen displays. Resource CD Fasteners 5. Insert the adapter into a USB port on your computer with or without the USB cable and plastic cradle. Note: The USB cable and plastic cradle can extend the range of your adapter and improve WiFi reception. USB cable Set Up NETGEAR genie You can set up NETGEAR genie and use it to join a WiFi network. If you do not want to use NETGEAR genie, you can install a Windows standalone driver and use the Windows WLAN Autoconfig service or the Wireless Zero Configuration service to join a WiFi network. For more information, see Install Windows Standalone Driver. 1. Insert the resource CD in your computer CD drive. Note: If your computer does not include a CD drive, download the WNDA3100v3 resource CD driver by visiting http://support.netgear.com. Click the Support For Home button and enter WNDA3100v3 in the search field. 4. To accept the license agreement, select the I agree radio button and click the Next button. A message displays asking you to wait while software is installed. After a few minutes, NETGEAR genie prompts you to insert your adapter. b. Insert the adapter into the plastic cradle. c. Connect the USB cable to the adapter. Note: NETGEAR recommends using the USB cable that is supplied in the package. Do not use another USB cable to connect the adapter to the USB port on your computer. Using another USB cable might affect the performance and correct functioning of the adapter. d. Connect the USB cable to a USB port on your computer. e. Join the fasteners together. 6. Return to the NETGEAR genie screen and click the Next button. NETGEAR genie displays a list of WiFi networks in your area. Join a WiFi Network Check Your Connection Status You can join a WiFi network from NETGEAR genie, or you can use Wi-Fi Protected Setup (WPS) if your WiFi router supports it. When you install your adapter, the adapter’s NETGEAR genie icon displays in the Windows system tray and on the desktop. You can double-click this icon to open NETGEAR genie to make changes or connect to a different WiFi network. The color of the icon indicates the strength of your WiFi connection: Join a Network Using NETGEAR genie 1. Insert the adapter into a USB port on your computer. that displays on the 2. Click the adapter’s NETGEAR genie icon Windows systems tray or on the desktop. The NETGEAR genie Home screen displays. 3. Click the Join a Network button. 4. Select a WiFi network. Install Windows Standalone Driver 5. Click the Connect button. For Windows 8.1, Windows 8, Windows 7, and Windows Vista, you can install the Windows standalone driver without NETGEAR genie and use the Windows WLAN Autoconfig service to join a WiFi network. If you use Windows XP, you can install the Windows standalone driver and use the Wireless Zero Configuration service to join a WiFi network. 6. If the network is secure, enter its password or network key. The adapter joins the network, which can take a few minutes. Your settings are saved in a profile. 1. Insert the resource CD in your computer CD drive. Note: If your computer does not include a CD drive, download the WNDA3100v3 resource CD driver by visiting http://support.netgear.com. Click the Support For Home button and enter WNDA3100v3 in the search field. If the Resource CD screen does not display, browse the files on the CD and double-click the Autorun.exe file. The NETGEAR Resource CD screen displays. 2. Click the Install Windows Standalone Driver button. The driver installs on your computer. 3. When prompted, insert the adapter into a USB port on your computer. October 2014 NETGEAR, Inc. 350 East Plumeria Drive San Jose, CA 95134, USA The adapter LED lights amber for a 2.4 GHz WiFi connection and blue for a 5 GHz WiFi connection. Join a Network Using WPS 1. Press and hold the WPS button on the adapter for two seconds. The adapter LED blinks. WPS button 2. Within two minutes, press the WPS button on your WiFi router or gateway. The adapter joins the network, which can take a few minutes. Your settings are saved in a profile. The adapter LED lights amber for a 2.4 GHz WiFi connection and blue for a 5 GHz WiFi connection. White. Strong connection Yellow. Weak connection Red. No connection If you remove your adapter, NETGEAR genie is not available, so the icon does not display. When you insert the adapter again, the icon returns. Support Thank you for purchasing this NETGEAR product. After installing your device, locate the serial number on the label of your product and use it to register your product at https://my.netgear.com. You must register your product before you can use NETGEAR telephone support. NETGEAR recommends registering your product through the NETGEAR website. For product updates and web support, visit http://support.netgear.com. NETGEAR recommends that you use only the official NETGEAR support resources. You can get the user manual online at http://downloadcenter.netgear.com or through a link in the product’s user interface. For the complete EU Declaration of Conformity, visit http://support.netgear.com/app/answers/detail/a_id/11621/. For regulatory compliance information, visit http://www.netgear.com/about/regulatory/. See the regulatory compliance document before connecting the power supply. NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to change without notice. © NETGEAR, Inc. All rights reserved.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No Language : en XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Format : application/pdf Title : N600 WiFi USB Adapter Model WNDA3100v3 Quick Start Guide Creator : NETGEAR Description : N600 WiFi USB Adapter Model WNDA3100v3 Quick Start Guide Subject : N600 WiFi USB Adapter Model WNDA3100v3 Quick Start Guide Create Date : 2014:10:02 18:08:26-07:00 Metadata Date : 2014:10:02 18:08:43-07:00 Modify Date : 2014:10:02 18:08:43-07:00 Creator Tool : Adobe InDesign CS6 (Windows) Instance ID : uuid:4104583c-79f5-421c-ba72-ecf4776aa106 Original Document ID : xmp.did:3B18FFCDA68EE3118389E3E3D5749344 Document ID : xmp.id:8FB66CC7994AE411824AC0BEC2A4F2B3 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:5419C7AF994AE411824AC0BEC2A4F2B3 Derived From Document ID : xmp.did:539DF037C4DAE311ACCDAACA02719F0C Derived From Original Document ID: xmp.did:3B18FFCDA68EE3118389E3E3D5749344 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Windows) History Changed : / History When : 2014:10:02 18:08:26-07:00 Producer : Adobe PDF Library 10.0.1 Keywords : N600 WiFi USB Adapter Model WNDA3100v3 Quick Start Guide Trapped : False Page Count : 2 Author : NETGEAR Warning : [Minor] Ignored duplicate Info dictionaryEXIF Metadata provided by EXIF.tools