Netop DP-M04 Auto focus microscope which connects to PC via USB interface User Manual

NETOP INDUSTRIAL CO., LTD. Auto focus microscope which connects to PC via USB interface Users Manual

User Manual

DP-M04 Auto Focus eScope User Manual
Thank you for buying our professional digital microscope. To guarantee the product function into fully play and prolong service life, please read the user manual carefully before installations. And the product should be well clean and maintenance when using it. In line with the policy of continued development, if there are any amendments on the appearance, color or assemblies, please refer to the real object. Our company reserves the right to amend on the the specifications and the manual without prior notification. Contents Warnings and Attentions Warnings.....................................................................3 Attentions....................................................................3 Part lists.......................................................................3 Product Overview...............................................................3 Specifications...................................................................4 Installation Guide Computer System Requirement....................................................4 eScope Software Installations.....................................................4 Auto Focus eScope Hardware Installations...........................................5 Auto Focus eScope Operations.....................................................5 eScope Software Guide Execute Software..............................................................6 Capture Photo................................................................6 Capture Video................................................................6 Time-lapsed Picture / Video.....................................................7 Picture / Video Save as.........................................................7 Calibration and Measurement Calibration..................................................................8 Measurement................................................................10 Change the Calibration........................................................10 Draw and Text...............................................................11 eScope Software Interface Instructions Main Interface Options instructions...........................................................12 Toolbar Instructions...........................................................13 Picture and Video Saving.......................................................14 Measurement interface instructions...............................................14 2
Us er m anualWarnings and Attentions Warnings Do not modify any accessories, or our company won't responsible for any malfunctions and calamities may cause. Do not put the product into fire, or our company won't responsible for any malfunctions and calamities may cause. Please follow the manual to operate the product, otherwise you have to bear all aftereffect. Attentions Always replace the lens cap to avoid dust and moisture when the device is not in use. Please stop using the product if any abnormal phenomena. Please use dry cloth to gently clean product. Do not use any chemicals to clean it. If the lens gets dirty, clean it with a blower brush or a soft cloth moistened with a little neutral detergent. Be careful not to scratch the lens surface. Park Lists Please check and confirm all the accessories are available before using. a. Auto Focus eScope x 1 b. CD-Rom Driver x 1 c. User Manual x 1 d. Dial for Calibration x 1 Product Overview a. Snap Shot Button b. Auto Focus Button c. Slight Adjustment Button <Up> d. Slight Adjustment Button <Down> e. Magnification Switch 3 3
Specifications CMOS Sensor 1/3〝 CMOS Image Sensor 2.0M Video Capture Resolution 1600x1200, 1280x960, 800x600, 640x480 Video Capture Format AVI Still Image Capture Resolution 1600x1200, 1280x960, 800x600, 640x480 Still Image Format BMP, JPEG Light Frequency 50Hz / 60Hz Frame Rate 30fps@VGA Magnification Rate 65X, 225X Shutter Speed 1 sec. to 1/1000 sec. White Balance Auto Exposure Auto Auto Focus Function Yes Focus Fine Button Yes <Up/Down> Light Source White LED x 8 PC Port USB 2.0 Operated System Windows XP / Vista / Win7 AP Language English, Simplified Chinese Power Supply 5V DC from USB Port Size 132(L)x32(D)mm Weight 105g Installation Guide Computer System Requirement * Microsoft Windows XP, Vista or Win7 * Pentium 4 processor or higher * 200MB or higher hard disk space * 1GB RAM or more * USB 2.0 Port * CD or DVD Drive eScope Software Installations 1. Insert enclosed CD into CD-ROM drive, the installation program will start automatically. If installation program doesn’t start automatically, please browse your CD -ROM drive and execute the “eScopeSetup.exe “ program 2. Select a path for the software. 4
3. Click ‘Next’ to install. 4. Click “finish” to complete the installation. 5. Now the “eScope ” shortcut Icon will show on the desktop automatically. Auto Focus eScope Hardware Installations After the software installation finish, connect Auto Focus eScope to computer by the USB port. Auto Focus eScope Operations To ensure the correct way in using the Auto Focus eScope, please follow below steps to operate. 1. Execute the eScope Software Double click the shortcut icon eScope on desktop, and then the real-time image will show up on screen. 2. Focus Focus the clear cover of eScope on the object. 3. Choose a magnification rate. Use the adjustable switch on the trail to choose a magnification rate. There are two magnification rates of 65X and 225X. 4. Auto Focus Press the AF button to start auto focus. * Make sure the Auto Focus eScope is fixed on the object after pressing the AF button, or it can’t focus well. * The auto focus accuracy rate can’t reach to 100% for all the Auto Focus products. Some colors or objects may affect the focus. In this case, please use the Slight Adjustment Button to help to adjust. * The higher resolution you choose, the longer time it’ll take to auto focus. We suggest use the resolution of 640 x 480 during auto focus and after the focus is ready, choose a higher resolution to capture photo so that you can get a photo with high resolution finally. 5. Capture Photo Please press on Snap Shot Button to capture photo after the focus is ready. * You can also use the eScope software to capture photo or video. (Detail operations please refer to eScope software guide) 5
eScope Software Guide Execute Software Remark: Before executing the software, please make sure the Auto Focus eScope is connected to the PC. Double click the shortcut icon eScope on desktop, and then the real-time image will show up on screen. * Slide mouse to the short cut icons in the main manual bar to quickly know the uses. (Please refer to eScope software interface instruction for more details.) Capture Photo a. Click ‘Capture Picture ’ shortcut icon in the main menu bar. b. Click ‘Capture > Photo F4’. c. Press the key F4 on keyboard. Capture Video a. Click ‘Start/Stop Recoder Video ’ shortcut icon in the main menu bar. b. Click ‘Capture > Video F8’. c. Press the key F8 on keyboard. 6
Time-lapsed Picture / Video a. Click ‘Time-lapsed Photo/Video ’ shortcut icon in the main menu bar. b. Click ‘Capture > Time-lapsed photo/video F5’. c. Press the key F5 on keyboard. * A new dialogue box appears in which you can enter desired setting data. * Under Time-lapsed photo, you can set the start time, interval time and total picture number. * Under Time-lapsed video, you can set the start time, interval time and total video number. Save Picture or Video All pictures and videos will saved under the assigned folder, if need to change the path, there are three ways as below. a. Press the shortcut button in the main menu bar b. Click on ‘File> Select saving folder’ to choose a new path. c. Right click on the photo/video > Save as to choose a new path. * All Pictures default format are BMP, you can select JPEG format as well. And all videos default format are AVI. 7
Calibration and Measurement Please make calibration before measurement. Calibration Click on the shortcut icon or choose ‘Display crossing’ under ‘Setting’ option to display the crossing. It’s used to check the dial is parallel or not. 1. Focus eScope on the attached dial and then press on the AF button to adjust. Take a picture for the selected area when the dial is parallel to the crossing as below. 2. Double-click on the picture to enter into measurement interface as below. 3. Click the calibration icon in the toolbar, and then a dialog will popup as below. 6 8
4. Click ‘OK’, the mouse will become a crossing on the screen. Click on the beginning and ending points across a known value (The default magnification rate and value will show up automatically). Now a dialog will popup as below and you need to enter the exact value of the measurement sample into the ‘Actual dimension’. Then the software will automatically calibrate the magnification rate. Click ‘OK’ and the adjusted magnification rate will show in the upper right corner.. * Remark: The broken line should be parallel to the dial during measurement. 5. Now you can trough ‘Calibration > Straight angle line’ to measure the value again. If the value you measure by software is nearly the same as the exact value of the dial means the calibration finish. * Base on the same magnification rate, click the icon and a dialog will show up automatically. Click ‘OK’ and the adjusted magnification rate will show in the upper right corner. 9
Measurement Double-click on the picture to enter into measurement interface. Under the ‘Measurement’ icon , you can choose any desired options to measure. 1. Any Angle Line Measurement Simply click from one point and drag to the next point, and then click again to lock-in. 2. Straight Angle Line Measurement The Line measurement allows you to measure from one point to the next. Simply click and drag to the desired length, and then click again to lock-in. 3. 45 Degrees’ Angle Line measurement This function is for any 45 Degrees’ Angle Line angle measurement. Simply click and drag to extend out to the desired angle. 4. Continuous Line Measurement The Continuous Line measurement allows you to measure any continuous desired length. Simply click and drag from one point to other desired points, click again to lock-in. 5. Polygon Measurement The Polygon Measurement allows you to measure the side-length, interior angle degree, circumference and area of the polygon. 6. Radius Circle Measurement Simply click and extend out to the desired radius, the radius, circumference and area of the circle will show up accordingly. 7. Diameter Circle Measurement Simply click and extend out to the desired diameter, the radius, circumference and area of the circle will show up accordingly. 8. Three Points Circle Measurement Simply define any three points and click, the radius, circumference and area of a circle will show up accordingly. 9. Three Points Arc Measurement Simply define any three points and click, the circumference of the arc as well as the radius and area of the sector will show up accordingly. 10. Three Points Angle Measurement This function allows measurement of an angle. Simply click and drag to extend out to the desired angle. 11. Four Points Angle Measurement Simply define any two points and click for the first line, and repeat the action to create the second line, the angle degree between two lines show up accordingly. Change the Calibration If change the magnification rate and adjust focus to capture picture, please calibrate the magnification rate again. 1. Double click to open the picture, Click ‘ > Reset magnification > Reset picture magnification’ as below. And then start calibration again (Calibration details please refer to page8, 9). 10
After clicking ‘Reset picture magnification’, the icon in the upper right corner is . 2. Change the magnification rate and capture several pictures, click on the picture to enter into measurement interface. And click ‘ > Set magnification > Set picture magnification’, now a dialog will show up as below, enter the magnification rate into the dialog and click ‘OK’. 3. If you want to use the same magnification rate to capture pictures, just click ‘ > Set magnification > Set capture magnification’. Now all pictures will use the same magnification rate and you can start measurement directly. Draw and Text You can draw or add a text on the picture for later analysis and study. 1. Click icon to choose any kinds of drawing under the pull-down manual as below. 11
2. Click icon and set the font for the text in the popup dialogue as below. 3. You can add any text on the picture after setting. eScope Software Interface Instructions Main Interface Options instructions File Option Under ‘File’ option, there are select saving folder, open, delete, copy image, copy file, save as, photo save as display and exit. Select saving folder --- Set the stored path for all the pictures and videos. Open --- Open the selected picture and video. Photo save as display --- Choose to display the picture size, date & time, file name, magnification and the font size for picture saving. The operations of delete, copy image, copy file, save as and exit are the same as normal. Setting Option Under ‘Setting’ option, there are resolution, real-time image setting, select device, display crossing, display date & time, sound effect and skin. The functions of real-time image setting, display crossing and display date & time are the same as the shortcut icons in the main menu bar. Resolution --- Set the size for picture and video. Real time image setting --- Set the brightness, contrast, color, saturation, definition, color correction, white balance and backlight. Display date & time --- Choose to display or not display the date and time for picture and video. Skin --- Choose the color for skin. 12
Capture Option Under ‘Capture’ option, the functions of photo (F4), video (F8) and time-lapsed photo / video (F5) are the same as the shortcut icons of in the main menu bar. Help Option Under ‘Help’ option, there are method, eScope update and about. Click the method into the eScope software instructions. And click eScope update to enter www.oi.com.hk/download to download the latest software. Toolbar Instructions Show or hide the title Select language - Choose a desired language Device setting - If there are more then one video devices, please choose the desired one. Crossing – Display or hide the crossing, it helps to measure the dial is vertical and parallel when capturing the picture for calibration. Capture picture – It’s used to capture picture one by one. Start / Stop recorder video. Real-time image setting - Set the brightness, contrast, color, saturation, definition, color correction, white balance and backlight. Time-lapsed photo / video – Set the start time, interval time and total photo/video number. Display date & time – Choose to display or not display the date and time for picture / video. Save as - Choose a new path to save picture /video. Click here - Show the magnification rate. 13
Picture and Video Saving On the left side of the main interface, there are two folders for saving picture and video. All the pictures and videos will save into the folders automatically after capture and show in thumbnails. The picture or video won’t be deleted after closing the software. We suggest save the important picture or video to other assigned folder and delete the useless picture and video. Show or hide the Picture and Video Saving Setup picture / video folder – Save picture / video in the assigned folder Up First Page Down Last Page Blue border means the picture/video is not selected. Green border means the picture/video is selected. Measurement interface instructions Save as Copy file Copy to clipboard Draw – Choose kinds of drawing under the pull-down manual. Text -You can add any text on the picture. Measure – There are different tools for measurement under the pull down menu. Previous – Open a previous picture Next – Open a next picture Undo – Undo to last step Redo – Redo to the step before undo Zoon in – Zoon in the interface Zoon out – Zoon out the interface Display the magnification rate 14
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC NOTE： THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. (b) For a Class B digital device or peripheral, the instructions furnished the user shall include the following or similar statement, placed in a prominent location in the text of the manual: Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.

Navigation menu