Netradyne BC09 Netradyne Bluetooth Beacon BC09 User Manual

Netradyne Inc Netradyne Bluetooth Beacon BC09

User Manual

Download: Netradyne BC09 Netradyne Bluetooth Beacon BC09 User Manual
Mirror Download [FCC.gov]Netradyne BC09 Netradyne Bluetooth Beacon BC09 User Manual
Document ID3806603
Application IDoAVaHxnhZZRN5djTTMnJmQ==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize8.6kB (107532 bits)
Date Submitted2018-04-04 00:00:00
Date Available2018-04-04 00:00:00
Creation Date2018-03-06 17:27:18
Producing Software福昕PDF打印机 版本 8.0.2.0718
Document Lastmod2018-03-30 09:33:02
Document TitleUser Manual

Model: BC-09
Name : Netradyne Bluetooth Beacon BC09
Manual v1.0
Part #
BC-09
Description
204720001, Tag beacon , Bluetooth 5.0, pre-flashed
software supports broadcasting Eddystone
The Beacon BC-09 is a new generation beacon that loaded Bluetooth 5.0 hardware platform, and
advertises Eddystone data every few seconds
The beacon BC-09 is not meant for configuration by the user and it comes from preconfigured with
Eddystone UID broadcasting for driver login feature
FEATURE
- Advertising Eddystone UID data
- Unique MAC address (ITU)
- Bluetooth 5.0 chipset nRF52 series
- Included 1pc CR2032 coin battery replaceable
- The max. 50 meters advertising distance
- Weatherproof housing with key-chain hole
BC-09 Tag Beacon
APPLICATION
- Driver Identification & Login
- Activity monitoring
ACCESSORY
- None
ACTIVATE BC-09
- Take out the plastic battery sheet from BC-09 Tag beacon to activate device.
CERTIFICATION
- FCC Regulation (FCC Part 15.)
ELECTRONIC PARAMETER
Item
Case Color
Battery Model
Operation Voltage
Transmission Current
Transmission Range
Antenna
Size
Value
white
1 x CR2032
1.8-3.6V
5.3mA (peak current)
50 meters
50ohm
32x23x 3.3 mm
Remarks
Other colors can be customized
1pc CR2032 coin battery, 3.0V
DC
Tested at 0dBm transmission power
Maximum
On board / PCB Antenna
Null
PARAMETER SETTING
Each BC-09 tag beacon has been pre-configured in the factory before the shipment. Here below is given
the main parameters and default settings.
Type
Eddystone
Base
Parameters
Extra
Function
Item
Instance ID @UID
Default Settings
random
(10 bytes)
Namespace ID @UID
random
(6 bytes)
URL
Measured Power
Radio Tx power
-59 (0xC5)
6 (0dBm)
Adv. Interval
9(900mS)
Beacon ID
random, it is MAC address of beacon actually.
Beacon Name
Connectable
PLUS
yes (it is configuration mode)
Password
Reset factory
Power off
Modify password
Remove password
custom
available
available
available
available
Update firmware
available
DECLARATION
The contents of this datasheet are subject to change without prior notice for further improvement.
Netradyne team reserves the right to explain all the terms of this datasheet.
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device
can be used in portable exposure condition without restriction.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.6-c015 81.157285, 2014/12/12-00:43:15
Format                          : application/pdf
Creator                         : 
Description                     : 
Title                           : 
Create Date                     : 2018:03:06 17:27:18+08:00
Creator Tool                    : 
Modify Date                     : 2018:03:30 09:33:02+08:00
Metadata Date                   : 2018:03:30 09:33:02+08:00
Keywords                        : 
Producer                        : 福昕PDF打印机 版本 8.0.2.0718
Document ID                     : uuid:1cd422e9-c186-43f3-bbfe-b0455f85c608
Instance ID                     : uuid:952d0bb3-f706-426b-a4a2-d8d66dfedd43
Page Count                      : 4
Author                          : 
Subject                         : 
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2AM8R-BC09

Navigation menu