Netvue Technologies NI-4501 Netvue Belle User Manual Users manual

Netvue Technologies Co., Ltd. Netvue Belle Users manual

Users manual

Download: Netvue Technologies NI-4501 Netvue Belle User Manual Users manual
Mirror Download [FCC.gov]Netvue Technologies NI-4501 Netvue Belle User Manual Users manual
Document ID3793395
Application ID8P40LdeamNekylOptVIWSQ==
Document DescriptionUsers manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize458.78kB (5734723 bits)
Date Submitted2018-03-23 00:00:00
Date Available2018-03-23 00:00:00
Creation Date2017-12-26 14:20:09
Producing SoftwareAdobe PDF library 15.00
Document Lastmod2018-03-21 17:03:30
Document Titlenetvue_QuickGuide_netvueBelle_112*109mm_CMYK_未转曲_20171215
Document CreatorAdobe Illustrator CC 2017 (Macintosh)

Hey there，I’m Belle.
The A.I. home assistant.
How can I serve you?
Belle Quick Guide
Warning
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception,which can be determined by turning the equipment off and on,
the user is encouraged to try to correct
the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. The device has
been evaluated to meet general RF exposure requirement. The device can be used in
portable exposure condition without restriction.
FCC ID: Z92IN-3200
What’s In The Box
X2
Screwdrivers
X2
Wire Harness
Anchors
Drill Bit
Hex Key
Wires
X2
X2
Wire Nuts Security Screw
Mounting Screws
Hey there，I’m Belle.
The A.I. home assistant.
How can I serve you?
Belle Quick Guide
Power Kit
Drilling Template
Quick Guide
Doorbell
Installation Guide Catalogue
1. More about Netvue Belle
2. Read Before Installation
3. Power Kit Installation
4. Physical Installation
5. Set Up With Netvue App
6. Status Light
7. Troubleshooting
P. 1-2
P. 3
P. 4-7
P. 8-15
P. 16-22
P. 23
P. 24-25
More About Belle
Light Sensor
Lens
Microphone
Button
Status Light
Speaker
Front
Wi-Fi Configuration
Button
Power
AC 16-24V
NO
Normally Open Signal
Door Port
GND
Common Port
NC
Normally Closed Signal
Door Port
Security Screw
Back
Note: Port
are for door unlock.
Read Before Installing
1. Keep the doorbell and all accessories out of reach of children and pets.
2. Please note that Netvue Belle is only compatible with wired doorbell chime.
3. Netvue Belle requires doorbell wires or transformer which has the voltage
range from 16 to 24 VAC (≥500mA).
4. Installation tools such as drill bit and screwdriver are included in the
package.
5. Please try to avoid placing doorbell close to the metal frame or electronic
devices such as microwave oven since they would interfere with Wi-Fi signal.
6. The product can only be used in proper temperature and humidity:
Operating temperature: -20°C - 50°C (-4°F-122°F)
Operating humidity: 0-90%
7. Please do not expose the camera lens to direct sunlight.
Power Kit Installation
The Power kit is required to ensure Netvue Belle working with your existing
doorbell chime.
Components that you need:
Power Kit
Wire Harness
Screwdriver
Step 1:
Shut off power at the breaker.
Remove the cover of your
doorbell chime.
Step 2:
Connect the wire harness
to the power kit.
Step 3:
Look for terminals labeled “Front” and
“Transformer”. Loosen the screws on
“Front” and “Transformer” but
do not disconnect the wires.
Step 4:
Connect the end of the wire
harness to “Front” and
“Transformer” terminals on
doorbell chime.
Note: It does not matter which
wire goes to which terminal.
Step 5:
Adhere the Power kit to the
side of the doorbell chime.
Step 6:
Replace the cover of your
doorbell chime.
Physical Installation
Components that you need:
X2
Screwdrivers
Drill Bit
X2
X2
Anchors
Wire Nuts
Wires
Hex Key
X2
Security Screw
Mounting Screws
1. Replace Your Existing Doorbell
Step 1:
Shut off the power at breaker. Remove your
existing doorbell and disconnect the wires.
Step 2:
Use the provided drilling template to mark the location
of drill holes. Then use the drill bit to drill two holes. Use
anchors if you install Netvue Belle on brick or concrete.
If you are installing on wood or siding, you would not
need those.
Step 3:
Push downward to detach the backplate from
Netvue Belle. Install it on the wall by mounting
screws.
10
Step 4:
Attach the provided wires to Netvue
Belle's power ports, and secure the
wires in position by tightening screws.
Then connect Netvue Belle to wires
that come out from your door by wire
nuts.
Voltage requirement：
16-24VAC
11
WiFi
Step 5:
Configuration Button
Read this step if you have an electromagnetic lock and want to connect it with
Netvue Belle for unlocking purpose. Otherwise, jump to Step 6.
is the common port(GND)and is required for all electronic locks. Use
and for normally open signal door ports(NO); and for normally closed
signal door ports(NC). Please choose the corresponding combination base
on the type of your door lock.
Power
AC 16-24V
NO
Normally Open Signal
Door Port
GND
Common Port
NC
Normally Closed Signal
Door Port
Security Screw
12
Step 6:
Restore the power. It may take few
minutes for Netuve Belle to power
on. Press the Wi-Fi configuration
button on its back after you hear
“ding-dong.” Then it is in the Wi-Fi
configuration mode once you see the
status light flashing blue.
13
Step 7:
Slide Netvue Belle into its backplate and start to set it up with Netvue App.
Note: Do not tighten the security screw at this moment in case you need to
make any adjustment.
14
2. If You Don’t Have a Existing Doorbell
Shut off the power supply. Run two conductor wires (#22-18ASG US standard
wire size) connecting to an AC power transformer (16-24VAC). The following
are options for Netvue Belle’s power supply:
Existing facility/house Alarm Control using the AUX 16VDC
(≥500mA) power.
Standard CCTV Camera 24VAC (≥500mA) power supply/transformer.
A 16-24 VAC (≥500mA) power wall adapter/transformer outlet.
Once you are done with Netvue Belle’s power supply, please repeat prior Step
2-7 in Replace Your Existing Doorbell section(Page 9) to finish the entire
physical installation process.
15
Set Up With The Netvue App
Download Netvue App
1. Download the Netvue App from App Store or
Google Play.
16
2. Open the App and log in. If you do not have an
account, you need to register one.
17
+
3. Press “+” to add a device. Then you will see a product
list show up, and choose Netvue Belle as your device.
18
AD :16V-24V
AC :16V-24V
4. Then follow the in-App instruction to complete
the entire setup process.
19
5. Test the video feed and Netvue Belle button to verify that it has
successfully connected to your Wi-Fi. Then tighten the security
screw at the bottom of Netvue Belle.
20
6. Netvue Belle requires few more steps of settings to work with
doorbell chime. Settings — In-Door Chime — Enable — Type.
21
Note :
1.Difference between mechanical and digital doorbell chime.
Mechanical doorbell chime plays"ding-dong."
Digital doorbell chime plays a melody.
2.For Wi-Fi configuration, please wait for the status light turns to solid red, and then press
the configuration button.
3. Netvue Belle only works with 2.4 GHz Wi-Fi.
4. For Wi-Fi connection setup, hold your phone in front of Netvue Belle and let it scan the
QR code on your phone. The distance between Netvue Belle and your phone should
about 2-4 inch (5-10 cm).
22
Status Light
Netvue Belle uses status light to communicate messages.
Status Light
Description
Flashing Blue
Wi-Fi configuration
Solid Blue
Working normally
Slowly Flashing Red
Have connected to Wi-Fi but fail to connect to Netvue Server
None
Fail to connect to Wi-Fi
23
Troubleshooting
Why can’t hear voice from the Netvue Belle?
Here are three scenarios:
1. Netvue Belle can’t speak to you
You probably haven’t turned on the Netvue X in the settings or having
network issues.
2. Not hearing voice from your phone’s speaker
You probably turn off Netvue Belle’s mic on App or your phone’s
speaker is off.
3. Not hearing voice from Netvue Belle’s speaker
You probably turn off Netvue Belle’s speaker on App or having issue
with your phone’s mic.
Why cannot receive motion detection or how to set motion detection?
Open the App — Choose the corresponding device — Tap settings icon
at the top right corner — Motion detection — Turn on the MOTION
DETECTION.
You can change the default motion detection time range to you
preferred one. Motion sensitive and motion zones also can be
customized.
24
How to share device with other users?
Open the App — Choose the corresponding device — Tap settings Icon at
the top right corner – SHARED USERS — Enter shared user’s account name.
If you share device with user who log in with Wechat or Facebook account,
check their username in App account info. Please note that username of
Wechat or Facebook is not the account name. Same account can be login on
different phones at the same time.
How to delete history?
Open the App — Choose the corresponding device — Tap “HISTORY”
at the bottom left corner — Press and hold the event you want to
delete for 2-3 seconds—A confirmation window pops up—Tap
“CONFIRM”.
25
Manufacturer's Name: NetVue Technologies Co. Ltd.
Importer：Cédrus Számítástechnikai Kft.
Netvue Belle
Model number: Netvue Belle
Operating Temperature: -20° C to 50° C
This device was tested for typical body-worn operations. To comply with RF exposure
requirements, a minimum separation distance of 20cm must be maintained between
the user’s body and the handset, including the antenna. Third-party belt-clips,
holsters, and similar accessories used by this device should not contain any metallic
components. Body-worn accessories that do not meet these requirements may not
comply with RF exposure requirements and should be avoided. Use only the supplied
or an approved antenna.
This device in compliance with the essential requirements and other relevant
provisions of Directive 2014/53/EU. All essential radio test suites have been carried
out.
1.CAUTION : RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
2.Adapter shall be installed near the equipment and shall be easily accessible.
3.The plug considered as disconnect device of adapter.
4.The device complies with RF specifications when the device used at 20cm form your
body.
This product can be used across EU member states.
Feel free to contact us for additional help:
support@netvue.com
1(866)749-0567
Chat with us through App
@NetvueTech
www.netvue.com
240 W Whitter Blvd Ste A, La Habra, CA 90631
© 2010-2017 Netvue Technologies Co., Ltd. All Rights Reserved.
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2017:12:26 14:20:09+08:00
Creator                         : Adobe Illustrator CC 2017 (Macintosh)
Creator Version                 : 21.0.0
Modify Date                     : 2018:03:21 17:03:30+08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.6-c015 81.157285, 2014/12/12-00:43:15
Format                          : application/pdf
Title                           : netvue_QuickGuide_netvueBelle_112*109mm_CMYK_未转曲_20171215
Metadata Date                   : 2018:03:21 17:03:30+08:00
Creator Tool                    : Adobe Illustrator CC 2017 (Macintosh)
Thumbnail Width                 : 256
Thumbnail Height                : 100
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 5293 bytes, use -b option to extract)
Instance ID                     : uuid:64fd6719-1824-4326-a0ed-786cfc0849ff
Document ID                     : xmp.did:01d8d2c9-e61c-42e8-b38e-e8a09283f840
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:d28e3361-2634-8849-b117-e65ac5075992
Derived From Document ID        : xmp.did:a04804fd-1137-4d14-874d-b30fda543f54
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:3b91fc4d-ddc9-4986-a5cb-8792b41d3bf5, xmp.iid:01d8d2c9-e61c-42e8-b38e-e8a09283f840
History When                    : 2017:12:15 10:18:27+08:00, 2017:12:26 14:20:04+08:00
History Software Agent          : Adobe Illustrator CC 2017 (Macintosh), Adobe Illustrator CC 2017 (Macintosh)
History Changed                 : /, /
Manifest Link Form              : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference
Manifest Reference File Path    : /Users/jiaqiao/Documents/netvue_work_jiaqiao/work/2017-12-11 netvueBelle 包装盒+说明书/design/说明书/文件/A14E5C924D47B997FB2D3E6BC270FBE1.png, /Users/jiaqiao/Documents/netvue_work_jiaqiao/work/2017-12-11 netvueBelle 包装盒+说明书/design/说明书/文件/A14E5C924D47B997FB2D3E6BC270FBE1.png, /Users/jiaqiao/Desktop/screen.png, /Users/jiaqiao/Documents/netvue_work_jiaqiao/work/2017-12-11 netvueBelle 包装盒+说明书/design/说明书/文件/screen-白.png, /Users/jiaqiao/Documents/netvue_work_jiaqiao/work/2017-12-11 netvueBelle 包装盒+说明书/design/说明书/文件/WechatIMG54.png, /Users/jiaqiao/Desktop/screen.png, /Users/jiaqiao/Desktop/WechatIMG178.jpg, /Users/jiaqiao/Desktop/screen.png, /Users/jiaqiao/Documents/netvue_work_jiaqiao/work/2017-12-11 netvueBelle 包装盒+说明书/design/说明书/文件/pic.png, /Users/jiaqiao/Desktop/screen.png, 即视通-APP.png
Ingredients File Path           : /Users/jiaqiao/Documents/netvue_work_jiaqiao/work/2017-12-11 netvueBelle 包装盒+说明书/design/说明书/文件/A14E5C924D47B997FB2D3E6BC270FBE1.png, /Users/jiaqiao/Documents/netvue_work_jiaqiao/work/2017-12-11 netvueBelle 包装盒+说明书/design/说明书/文件/A14E5C924D47B997FB2D3E6BC270FBE1.png, /Users/jiaqiao/Desktop/screen.png, /Users/jiaqiao/Documents/netvue_work_jiaqiao/work/2017-12-11 netvueBelle 包装盒+说明书/design/说明书/文件/screen-白.png, /Users/jiaqiao/Documents/netvue_work_jiaqiao/work/2017-12-11 netvueBelle 包装盒+说明书/design/说明书/文件/WechatIMG54.png, /Users/jiaqiao/Desktop/screen.png, /Users/jiaqiao/Desktop/WechatIMG178.jpg, /Users/jiaqiao/Desktop/screen.png, /Users/jiaqiao/Documents/netvue_work_jiaqiao/work/2017-12-11 netvueBelle 包装盒+说明书/design/说明书/文件/pic.png, /Users/jiaqiao/Desktop/screen.png, 即视通-APP.png
Startup Profile                 : Print
Has Visible Overprint           : False
Has Visible Transparency        : True
N Pages                         : 1
Max Page Size W                 : 111.999889
Max Page Size H                 : 109.001278
Max Page Size Unit              : Millimeters
Font Name                       : NotoSansHans-Regular, NotoSansHans-Bold, FZLTZHK--GBK1-0, Lato-Light, Lato-Regular, Lato-Bold, Lato-BoldItalic
Font Family                     : Noto Sans S Chinese, Noto Sans S Chinese, 兰亭黑-简, Lato, Lato, Lato, Lato
Font Face                       : Regular, Bold, 中黑, Light, Regular, Bold, Bold Italic
Font Type                       : Open Type, Open Type, TrueType, TrueType, Open Type, Open Type, Open Type
Font Version                    : Version 1.000;PS 1;hotconv 1.0.78;makeotf.lib2.5.61930, Version 1.000;PS 1;hotconv 1.0.78;makeotf.lib2.5.61930, 13.0d2e1, Version 1.104; Western+Polish opensource, Version 1.104; Western+Polish opensource, Version 1.104; Western+Polish opensource, Version 1.104; Western+Polish opensource
Font Composite                  : False, False, False, False, False, False, False
Font File Name                  : NotoSansHans-Regular.otf, NotoSansHans-Bold.otf, Lantinghei.ttc, Lato-Light.ttf, Lato-Regular.ttf, Lato-Bold.ttf, Lato-BoldItalic.ttf
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Group Name               : 默认色板组, 灰色, 明亮
Swatch Group Type               : 0, 1, 1
Swatch Colorant Swatch Name     : 白色, 黑色, CMYK 红, CMYK 黄, CMYK 绿, CMYK 青, CMYK 蓝, CMYK 洋红, C=15 M=100 Y=90 K=10, C=0 M=90 Y=85 K=0, C=0 M=80 Y=95 K=0, C=0 M=50 Y=100 K=0, C=0 M=35 Y=85 K=0, C=5 M=0 Y=90 K=0, C=20 M=0 Y=100 K=0, C=50 M=0 Y=100 K=0, C=75 M=0 Y=100 K=0, C=85 M=10 Y=100 K=10, C=90 M=30 Y=95 K=30, C=75 M=0 Y=75 K=0, C=80 M=10 Y=45 K=0, C=70 M=15 Y=0 K=0, C=85 M=50 Y=0 K=0, C=100 M=95 Y=5 K=0, C=100 M=100 Y=25 K=25, C=75 M=100 Y=0 K=0, C=50 M=100 Y=0 K=0, C=35 M=100 Y=35 K=10, C=10 M=100 Y=50 K=0, C=0 M=95 Y=20 K=0, C=25 M=25 Y=40 K=0, C=40 M=45 Y=50 K=5, C=50 M=50 Y=60 K=25, C=55 M=60 Y=65 K=40, C=25 M=40 Y=65 K=0, C=30 M=50 Y=75 K=10, C=35 M=60 Y=80 K=25, C=40 M=65 Y=90 K=35, C=40 M=70 Y=100 K=50, C=50 M=70 Y=80 K=70, ffffff, C=0 M=0 Y=0 K=100, C=0 M=0 Y=0 K=90, C=0 M=0 Y=0 K=80, C=0 M=0 Y=0 K=70, C=0 M=0 Y=0 K=60, C=0 M=0 Y=0 K=50, C=0 M=0 Y=0 K=40, C=0 M=0 Y=0 K=30, C=0 M=0 Y=0 K=20, C=0 M=0 Y=0 K=10, C=0 M=0 Y=0 K=5, C=0 M=100 Y=100 K=0, C=0 M=75 Y=100 K=0, C=0 M=10 Y=95 K=0, C=85 M=10 Y=100 K=0, C=100 M=90 Y=0 K=0, C=60 M=90 Y=0 K=0
Swatch Colorant Mode            : CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK
Swatch Colorant Type            : PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS
Swatch Colorant Cyan            : 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 0.000000, 15.000000, 0.000000, 0.000000, 0.000000, 0.000000, 5.000000, 20.000000, 50.000000, 75.000000, 85.000000, 90.000000, 75.000000, 80.000000, 70.000000, 85.000000, 100.000000, 100.000000, 75.000000, 50.000000, 35.000000, 10.000000, 0.000000, 25.000000, 40.000000, 50.000000, 55.000000, 25.000000, 30.000000, 35.000000, 40.000000, 40.000000, 50.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 85.000000, 100.000000, 60.000000
Swatch Colorant Magenta         : 0.000000, 0.000000, 100.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 90.000000, 80.000000, 50.000000, 35.000000, 0.000000, 0.000000, 0.000000, 0.000000, 10.000000, 30.000000, 0.000000, 10.000000, 15.000000, 50.000000, 95.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 95.000000, 25.000000, 45.000000, 50.000000, 60.000000, 40.000000, 50.000000, 60.000000, 65.000000, 70.000000, 70.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 75.000000, 10.000000, 10.000000, 90.000000, 90.000000
Swatch Colorant Yellow          : 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 0.000000, 0.000000, 0.000000, 90.000000, 85.000000, 95.000000, 100.000000, 85.000000, 90.000000, 100.000000, 100.000000, 100.000000, 100.000000, 95.000000, 75.000000, 45.000000, 0.000000, 0.000000, 5.000000, 25.000000, 0.000000, 0.000000, 35.000000, 50.000000, 20.000000, 40.000000, 50.000000, 60.000000, 65.000000, 65.000000, 75.000000, 80.000000, 90.000000, 100.000000, 80.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 95.000000, 100.000000, 0.000000, 0.003100
Swatch Colorant Black           : 0.000000, 100.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 10.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 10.000000, 30.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 25.000000, 0.000000, 0.000000, 10.000000, 0.000000, 0.000000, 0.000000, 5.000000, 25.000000, 40.000000, 0.000000, 10.000000, 25.000000, 35.000000, 50.000000, 70.000000, 0.000000, 100.000000, 89.999400, 79.998800, 69.999700, 59.999100, 50.000000, 39.999400, 29.998800, 19.999700, 9.999100, 4.998800, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.003100
Swatch Colorant Tint            : 100.000000
Producer                        : Adobe PDF library 15.00
Page Count                      : 31
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2AO8RNI-4501

Navigation menu