New Bright Co GF21H3 Radio Control Toy Transmitter User Manual Manual

Download:
Mirror Download [FCC.gov]
Document ID	2653886
Application ID	pHAXFuJhEJEBMDBc4OvcCg==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	55.95kB (699326 bits)
Date Submitted	2015-06-19 00:00:00
Date Available	2015-06-19 00:00:00
Creation Date	2015-06-18 15:11:19
Producing Software	Canon iR C3580 PDF
Document Lastmod	0000-00-00 00:00:00
Document Title	Manual
Document Creator	Canon iR C3580 PDF

CAUTION-ELECTRICALLI OPERATED PRODU
NOT RECOMMENDED FOR CHILDREN UNDER 8 YEARS OF AGE
AS WITH ALL ELECTRIC PRODUCTS, PRECAUTIONS SHOULD BE
OBSERVED DURING HANDLING AND USE TO PREVENT ELECTRIC
SHOCIL INPUT: 120V AC COHZ 8W. OUTPUT 13V DC 440mA
mm-
OWNER'S MANUAL
Please read and understand all precautions prior to use.
Thank you for doooslug I premium New lrlgllt produce.
Model / Modéle No. GF21H3
unmana-
JO—doyLlrnrledWarrimy
New Bngm Industries wananrs tn the original purchaser om Ilris product will be free ordelecls in materials and
worllmonship (or "rim (:0) days horn (he dare ol purchase In me evurtolsudr a Medwltlrin drewarramy period
New 9er will repair or region on prelim atour sole discretion. This warranty does nmaover damage resulting lrmrr
unaullrorized modifications Mcident. misuse, or abuse.
Should your hem have a delerx covered under this warranty, filst I" the roll lr‘e number lined below. Mos! problems fill
be resolved in «his manner. ll neassary, you will be issued a man arnMrIuIion (RA) number, and instructed on how to
obtain a Prodlm Relurn Form. llre Product is lo be used when reaming modud lo us (pomqe prepaid and insured by
llle tor-isomer),
when returning a defective product please package the produa. the Produd Relurrr Form and a envy of are dated sols
"(aim 35 orwl al purchase. Be sure [0 mark [he M number on file Pmdud Return form. W the prodm is mumed '
wirlrour a dared pres mrpt n will be utluded from (werage under W5 warranty. Please allow! m 6 weeks for delivery
ol repaired or replacement vehicle (depending on your localionl
New Bright Induso'ies' liabilily lor deltas in mammal and workmanship unfl-r llria marvel-my shall be Iinrr'I-d lo repair or '
reolanerrlern. at our sole discretion, and in no event shall we be responsible lor oopflnwn
damages (moth om mus um do not allow rlrrs exclusion or Iimiu ‘ ~ . - a: ‘
Valid only In USA Ind (a -
Conracr New Bright Indr Crammer
Toll Free
1437142413597 *—
M-F amour to 5mm EasternflTE' %
New Bright
‘3,» Table of Contents -
Section 1:
Section 2:
‘ Section 4:
Section 5:
Section 6:
Section 7:
Section 8:
Section 9:
Section 10:
Section 11:
Table of Contents
Component Checklist
Charging the Battery
Battery Installation in Vehicle
Vehicle Features and Functions
Transmitter Battery Installation
Transmitter Features and Functions
Proper Use
Precautions and Care
Trouble Shooting and Support
Caution
New Bright
1 Radio Transmitter
\\
ans"
1 9.6V llthium-lnn Battery Pack
(lnduded and» mm In! 'Try-Ma')
’ D]
2 M Battevies
Vehicle
Charging Status
1. Insert the 9.6V Lithium Ion rechargeable battery pack securely into the charger and push
up to look. Be sure the arrows are properly matched (as shown above).
2. Plug the Charger into a standard indoor electrical outlet. This power unit is intended to be
correctly orientated in a vertical or wall mount position.
3. Allow battery to charge lor 1-1.5 Hours. Charging Status Light will be solid red while battery
is charging, When charging is complete. light will blink green.
4. To remove the battery. press and hold the release button and slide battery down to unlock
5. Charge will last approximately 12 minutes depending on terraln and driving style. '
lMPORTANT: it Is normal tor the battery peek to become warm alter charging and/or use. Be
sure to allow the battery pack to cool before using or recharging. Recharging a warm battery
pack will greatly reduce the battery life. ~
ATTENTION PARENTS:
o The Battery Charger 5. Battery Pack need to be periodically examlned for potential
hazards. Any potentially hazardous parts need to be repaired or replaced.
Vehicle
I Battery Installation .
llllll'
C‘fi
Locate and align arrow on battery pack with arrow inside battery compartment.
Place battery pack in battery compartment and slide battery forward in direction
of arrow. Once in place, turn locking tab to keep battery pack secure.
If battery pack is not completely in place locking tab will not fully turn.
Transmitter
‘ Features and Functions"
Press to hear sound from figure
and the mouth of figure moves. a ,
START/MUTE SOUND: VOlCE:
Press to hear Press to hear
sound. Press again sound.
for mute.
Sounds MI north»: u buy In car
is native. Pronununloimofllm
sounds. Plan start to Wild
sounds,
FonNard/Reverse Left/Right
Driving Steering
Note:
Vehicle has working lights. When driving forward or reverse the lights will turn
on. When stopping either in forward or reverse the lights will turn off.
This transmitter is equipped with 2.4GHz technology which allows up to 6
vehicles to be raced at the same time.
The transmitter will automatically sync with the vehicle.
Transmitter
‘3 Battery lnstallatigfl
Flrmly press TAB in the directlon of the ARROW and pull
back to open battery compartment cover.
Install 2"AA" batteries as shown, making sure (4-) and H markings on
batteries line up with the (+) and H markings in the battery
compartment.
Replace battery compartment
cover. Cover should click when
locked in place.
Note: when replacing Iransmiuer batterles:
Use alkaline batteries only.
Do not mix old and new batteries.
' Do not mix alkaline standard or
rechargeable batteries.
Switch vehicle OFF
when not in use.
Wipe body with a Do not use chemicals
soft rag or cloth. or water to clean
7 Troubleshooting & Support
Problem - Vehicle does not move or moves slowly.
- Make certain there are fresh batteries in the transmitter and that they have been
installed in the correct position.
- Are the (+) and H markings on the batteries in the same position as the (+) and
H markings in the Transmitter Battery Compartment?
- Has the Battery Pack been installed in the vehicle?
- Has the rechargeable Battery Pack been fully charged?
- Are the (+) and H markings on the Battery Pack in the same position as the (+)
and H markings in the Battery Compartment?
- Are the metal contact tabs touching, rusty or dirty in the transmitter?
- Make certain that the vehicle ONIOFF switch is in the 'ON' position.
Problem - Vehicle moves by itself or exhibits reduced range from the transmitter.
- Make certain there is no outside radio Interference in your area. The best way to
test this Is to take the vehicle as far away from radio towers, electrical lines or tall
buildings as possible to ensure no further radio interference will occur.
FCC CAUTlON:
Changes or modifications not expressly approved by the party responsible for compllanoe could
void the user's authority to operate the equipment.
N015:lhis equipment has been tested and lound to comply with the limits tor a Class B digital device,
pursuant to Part 15 ol the FCC Rules.These limits are desi ned to provide reasonable protection
against harmlul interference in a residential installation. is equipment generates, uses and can
radiate radio tr uency energy and, it not installed and used in accordance with the instructions,
may cause harm ul interlerence to radio communications. However, there Is no guarantee that
interlerence will not occur in a particular Installation. ll this equipment does cause harmful
interterence to radio or television reception, which can be determined by turning the equipment
oil and on. the user is encouraged to try to correct the interference by one or more ol the
lollowing measures?
« lteorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect elihe equipment into an outlet on a circuit different from that to which the receiver is
connect .
- Consult the dealer or an experlenced radio/TV technician lor help.
RSS Statement
This device complies with Industry Canada licence-exempt R55 standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence, L'exploitation est autorise’e aux deux conditions suivantes : (1) l'appareil ne doit pas produire de
brouillage, et (2) l'utilisateur de l'appareil doit accepter clout brouillage radioelectrique subi, méme si Ie
brouillage est susceptible d'en oompromettre Ie fanctionnement.
Due to low power design. this product is exempted from RF exposure or SAR evaluation and is safe for
intended use
En raison d’une conception de faible puissance oe produit est exempteaux RF on d'evaluation SAR et sans danger a
l'usage nromal
New Bright
— Cautions..-
Do not recharge Battery Pack if it is hot or warm to the touch.Allow Battery' '
Pack to cool before recharging. Recharging a hot or warm Battery Pack will
shorten the life of the Pack.
Do not recharge a Battery Pack if it appears to be damaged or leaking.
Always unplug Charger when not in use.
Always remove Battery Pack from Battery Compartment when not in use.
Do not dispose batteries in fire. Leakage, explosion and personal injury may
occur.
Dispose of Lithium-Ion flattery Pack properly.
Do not attempt to disassemble Battery Pack or Charger.
Do not use Battery Charger for any use other than instructed in this booklet.
Only an adult should charge Batteries.
Do not attempt jumps or tricks with this vehicle.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Creator                         : Canon iR C3580  PDF
Create Date                     : 2015:06:18 15:11:19+08:00
Producer                        : Canon iR C3580  PDF
Page Count                      : 12

EXIF Metadata provided by EXIF.tools