New Bright Co GF31HRR TOY Transmitter User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3427372
Application ID	zRW9CboBWsDnvtLCtfX8Lw==
Document Description	User Manual.pdf
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	52.06kB (650731 bits)
Date Submitted	2017-06-15 00:00:00
Date Available	2017-06-15 00:00:00
Creation Date	2017-06-02 12:26:51
Producing Software	Adobe PSL 1.1e for Canon
Document Lastmod	0000-00-00 00:00:00
Document Title	User Manual.pdf
Document Creator	Canon iR-ADV C5035 PDF

OWN ER’S MAN UAL
Please read and understand all precautions prior to use.
' Model I Modéle No. GFaiHRR,GF32RR
Thank you for choosing a premium New Bright product.‘
USA & Canada
30-Day Limited Warranty
New Bright Industries warrants to the original purchaser that this product will be free of defects in materials and
workmanship for thirty (30) days horn the date at purchase. In the event at such detect within the warranty period
New Bright will repair or replace the product at our sole discretion mis warranty does not cover damage resulting from
unauthorized modifications ercidenL misuse. or abuse.
Should your item have a defect covered under this warranty. first call the toll free number listed below. Mos! pro‘ciems
can be resolved in this manner. ll necessary, you wrll be issued a Retum Authorization (RA) nunrber and instructions on
how to obtain a Product Return Four-i. The Product Return Form is to be used when returning a product tr: us (postage
ore-paid and insured by the consurner). .__'
When returning a defective product please package the product the Product Return Form and a copy ol the dated sales
receipt as proof of purchase. 8e sure to mark the RA number on the Product Return Form. ll the product is returned
without 3 dated sales receipt. it will be excluded from coverage under this warranty. Please allow 4 to 6 weeks for
delivery cl repaired or replacement vehicles (depending on your location).
New Bright Industries‘ liability for defects in materials and workmanship under this warranty shall be limited to repair or
- replacement at our sole discretion. In no event shall we be responsible for incidental. consequential or contingent
damages (except in those states that do not allow this exdusron or limitation).
Valid only In the USA 8r Canada.
Comm New Bright Industries Customer Service Toll Free at:
1-877-NEl-TOV5
(14776244697)
Monday through Friday. 5mm to so) PM [astem Time
U751 rearwmms
New Bright
Table of Contents
Section 1: Table of Contents
Section 2: Component Checklist
Section 3: Vehicle Features & Functions
Section 4: Charging the’Battery
Section 5: Transmitter Battery Installation
Transmitter Features & Functions
Section 6: Proper Use
Precautions & Care
Section 7: Trouble Shooting & Support
. New Bright ‘
I Component Checklist
. (1) we Vehicle With usa Cord
- (1) Transmitter
r (2) AA Batteries
Vehicle
Features and FunCtions
:JFZB Charging CO! 1'
in;
Charge
Sta1us ngm
Vehicle
I tharghgj.» Battety
This vehicle is equipped with an internal Lithium Ion battery that Is recharged via
USBH lLt‘iiwti :‘IEIIZ‘ "4',rk1’§irtllr\i‘1{’r“.
USB Charging Cam;
and Storage Compartment
. Locate the ON/OFF SWItch and USB cord on the under—Side of the
vehicle,
I Turn the ON/OFF switch to the “OFF“ posmon.
Open Storage Compartment cover
. Remove USB cable from the Storage Compartment. (Use care when
exiendmg cord as it is attached to Inside Internal battery). Cord can be
plugged Into any computer or USB outlet Dnck [not included)
While charging the LED under the vehicle Will be on. Once lully charged
the LED will turn off. Charging is completed in approximately 1 hour,
Return cord and secure storage lid belore operating the vehicle
Note: When replaa'ng Transmitter batteries:
Use alkaline batteries only.
Do not mix old and new batteries.
Do not mix alkaline, standard or rechargeable banerles‘
F':_FeatUres and Functions
‘ Forward/Reverse
Drive
This transmitter is equipped with 2.4GHz technology which allows up to 6
vehicles to be raced at the same time.
The transmitter will automatically sync with the vehicle.
Proper Use
Precautions and Care J
Switch vehicle OFF Brush areas where
when not‘in use. dirt gets trapped.
Wipe body with a Do not 'use chemicals
soft rag or cioth. ; or water to clean
Trouble shooting & Support
Problem - Vehicle does not move or moves slowly.
- Make certain there are fresh batteries in the transmitter and that they have been
installed in the correct position.
- Are the (+) and i-) markings on the batteries in the same position as the (4») and (-)
markings in the Transmitter Battery Compartment?
- Has the Battery Pack been installed in the vehicle?
- Has the rechargeable Battery Pack been fully charged?
- Are the (+) and (-i markings on the Battery Pack in the same position as the (+) and
H markings in the Battery Compartment?
— Are the metal contact tabs touching, rusty or dirty in the transmitter?
- Make certain that the vehicle ON/OFF switch is in the "ON" position.
Problem - Vehicle moves by itselt or exhibits reduced range from the transmitter,
e radio interterence in your area. The best way to test
- Make certain there is no outsid
rs, electrical lines or tall
this is to take the vehicle as far away trom radio towe
buildings as possible to ensure no iurther radio interference will occur.
NOTE: This equipment has been tested and lound to comply
with the limits tor a Class B digital device, pursuant to Part 15 oi
the FCC Rules. These limits are designed to provide reasonable
protection against harmiul interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and. it not installed and used in
accordance with the instructions, may cause harmlul
inteflerence to radio communications. However. there is no
guarantee that interlerence will not occur in a particular
installation. it this equipment does muse harmful interference to
radio or television reception, which can be determined by
turning the equipment oil and on. the user is encouraged to try
to correct the interference by one or more at the following
measures:
-- Flearient or relocate the receiving antenna.
— increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
' — Consult the dealer or an experienced radio/TV technician
for help. ’
FCC CAUTION:
Changes or modification not . 0
expressly approved by the '. A
party responsible for ,
' compliance owld void the w
user's authority to operate
MW”- . momma
rec m ...|
RSS Statement
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may
not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Le présent appareil est conforms aux CNR d'Industr‘ie Canada applicables
aux appareils radio exempts de licence. L'exploitation est autorise'e aux
deux conditions suivantes : (1) l‘appareil ne doit pas produire de brcuillage,
et (2) l'utilisateur de l'appareil doit acceptor dout brouillaga radioélectrique
subi, mérne si la brouillage est susceptible d'en comprornettre I: foncticnnement.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Creator                         : Canon iR-ADV C5035  PDF
Create Date                     : 2017:06:02 12:26:51+08:00
Page Count                      : 9
XMP Toolkit                     : Adobe XMP Core
Creator Tool                    : Canon iR-ADV C5035  PDF
Producer                        : Adobe PSL 1.1e for Canon
Format                          : application/pdf
Document ID                     : uuid:1be93059-0000-001e-8f33-0f6300000000

EXIF Metadata provided by EXIF.tools