New Bright Co GF64UM TOY Transmitter & Receiver User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2617306
Application ID	u4Gmpw+Jldta9zsfq6mnPg==
Document Description	User Manual.pdf
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	47.21kB (590152 bits)
Date Submitted	2015-05-18 00:00:00
Date Available	2015-05-18 00:00:00
Creation Date	2015-05-05 14:41:09
Producing Software	Canon iR C3580 PDF
Document Lastmod	0000-00-00 00:00:00
Document Title	User Manual.pdf
Document Creator	Canon iR C3580 PDF

OWNER’S MANUAL
Please read and understand all precautions prior to use.
Thank you for choosing a premium New Bright product.
ModeI No. l Modélo : GFMUM
USA r. Canada
30-Day Limited Warranty
New Bright Industries warrants to the original purchaser that this product will be tree at delects in
materials and workmanship for thirty (30) days lrorn the date of purchase. In the event at such detect
within the warranty period. New Bright will repair or replace the product at our sole discretion. This
warranty does not cover damage resulting trom unauthorized modifications, accident. misuse or abuse.
Should your item have a detect covered under this warranty, lirst call the toll tree number listed below.
Most problems can be resolved in this manner. It necessary, you will be issued a Return Authorization
number (HA) and instructions on how to obtain a Product Return Form, The Product Return Form is to be
used when returning a product to us (postage pre-paid and insured by the consumer).
When returning a defective product, please package the product, the Product Return Form and a copy oi
the dated sales receipt as proof of purchase. Be sure to mark the RA number on the Product Return
Form. If the product is returned without 8 dated sales receipt, it will be excluded irom coverage under thls
warranty. Please allow 4 to 6 weeks for deliveryol repaired or replacement vehicles (depending on your
location).
New Bright Industries‘ liability for defects in materlals and workmanship under this warranty shall be
limited to repair or replacement at our sole discretion. In no event shall we be responsible for Incidental,
consequential or contingent damages (except in those states that do not allow this exdusion or limitation).
Valid only In the USA at Canada.
Contact New Bright Industries Customer Service Toll Free at:
t-Gfl-NBl-TDVS
(t-B77<624-8697)
Monday through Friday, 8:00 AM to 5:00 PM Eastern Time
L/JN117-15
New Bright
Table of Contents
Section 1: Table of Contents
Section 2: Component Checklist \.
Section 3: Vehicle Features & Functions
Section 4: Charging the Battery
Section 5: Transmitter Battery Installation
Transmitter Features & Functions
Section 6: Proper Use
Precautions & Care
Section 7: Trouble Shooting & Support
This device camplles mm Industry Canada
licence-exempt RSS standards) operauon
45 sublect to me lollowmg two conditions
n) [his uewoe may not cause interference.
and (2) this device must accept any mienerenoe.
including interference that may muse undesrred
operation ol‘ me dewoe
Le présent appareil est conforme aux CNR
d‘lndustrle Canada appliables aux appareils
radio exempts de licenoe L‘exploltelion est
c € 1797 semi“:
l1) l‘appaiefl ne doit pas prooulre d8 brouillage,
er (2) l‘uullsaleur de l'appareil amt awepter
dout bioulllage vadmélecmuue Subl‘ meme Sr
le thulllagE est Susceptible d‘en compromeme
REF-61222161223 150408 le tcnmionnement
Vehicle
Features and Functions
Charge Wheel Alignment
Status Light
USB Charging Port ONIOFF Switch
' It vehicle pulls to the left or right during forward driving the Wheel Alignment
may need to be adjusted. The Wheel Alignment Dial is located on bottom oi
chassis between the front wheels.
Charging the Battery
This vehicle is equipped with an internal Lithium-Ion battery that is recharged via
USB. OWOFF Switch must be in the OFF position prior to charging.
USB Charging Port
1. Locate the ON/OFF switch and small USB port on the under-side of the
vehicle.
2. Turn the ON/OFF switch to the “OFF" position.
3. insert small end of supplied USB cord into the port. The'large end of the
supplied cord can be plugged into any computer or USB outlet brick (not
included). \
“(at
, El
4. While charging, the LED under the vehicle will be on. Once fully charged
the LED willturn off. Charging is completed in approximately 2 hours.
Remove and store cords when not in use.
Transmitter
Note: When replacing Transmitter batteries:
Use alkaline batteries only.
Do not mix old and new batteries
Do not mix alkaline, standard or rechargeable batteries.
Features and Functions
Forward/Reverse Left/Right
Drive Steerlng
This transmitter is equipped with 2.4GHz technology which allows up to 6
vehicles to be raced at the same time.
The transmitter will automatically sync with the vehicle.
«8
Switch vehicle OFF
when not in use.
Wipe body with a
soft rag or cloth.
Brush areas where
dirt gets trapped.
Do not use chemicals
or water to clean.
Trouble Shooting & Support
Problem - Vehicle does not move or moves slowly.
— Make certain there are fresh alkaline batteries in the transmitter and that they
have been installed in the correct position.
- Are the (+) and (-) markings on the alkaline batteries in the same position as
the (+) and H markings in the Transmitter Battery Compartment?
- Are the metal contact tabs touching, rusty or dirty in the transmitter?
- Has the vehicle been fully charged?
- Make certain that the vehicle ON/OFF switch is in the “ON" position.
Problem -Vehicle moves by itself or exhibits reduced range from the transmitter.
- Make certain there are no outside radio interference in your area. The best
way to test this is to take the vehicle as far away from radio towers, electrical
lines or tall buildings as possible to ensure no further radio interference
will occur.
Always remove Batteries from transmitter when not in use.
Do not dispose batteries in tire. Leakage, explosion and personal injury
may occur.
Do not attempt jumps or tricks with this vehicle.
Do not attempt to remove internal battery.
Do not use included USB cord for anything other than its intended purpose.
Always keep USB cord stored when not in use.
Adult supervision recommended.
FCC CAUTION:
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and round to comply with the limits to! a Class B digital device. pursuant to Part 15 oi the
FCC Rules. These limits are designed to provide reasonable protection against harmlut interterence in a residential
installation. This equipment generates. uses and can radiate radio lrequency energy and, it not installed and used in
accordance with the instructions. may cause harmlut interierance to radio communications. However, there is no guarantee
that interierence will not occur in a particular installation. It this equipment does cause harmiul interlerence to radio or
tatevisron reception, which can be determined by turning the equipment all and on. the user is encouraged to try to correct
the interlerence by one or more at the lollowing measures:
- Reortent or relocate the receiving antenna.
- Increase the saparan‘on between the equipment and receiver.
- Connect the equipment into an outlet on a circuit diiterent lrom that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician tor help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Creator                         : Canon iR C3580  PDF
Create Date                     : 2015:05:05 14:41:09+08:00
Producer                        : Canon iR C3580  PDF
Page Count                      : 8

EXIF Metadata provided by EXIF.tools