New Bright Co GF64UMA TOY Transmitter & Receiver User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2625457
Application ID	AErx2LMVtE63TyCZGtFEeQ==
Document Description	User Manual.pdf
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	45.78kB (572253 bits)
Date Submitted	2015-05-27 00:00:00
Date Available	2015-05-27 00:00:00
Creation Date	2015-05-21 16:14:58
Producing Software	Canon iR C3580 PDF
Document Lastmod	0000-00-00 00:00:00
Document Title	User Manual.pdf
Document Creator	Canon iR C3580 PDF

BRIGHT:
OWN ER’S MANUAL
Please read and understand all precautions prior to use.
Thank you for choosing a premlum New Bright product.
Model No. lModéIe : GF21 HA, GF64UMA
USA at Canada
30-Day leited Warranty
New Bright Industries warrants to the original purchaser that this product will be tree at detects in
materials and workmanship tor thirty (30) days trorn the date ot purchase. in the event of such detect
within the warranty period, New Bright will repair or replace the product at our sole discretion. This
warranty does not cover damage resulting lrom unauthorized modifications, accident, misuse or abuse.
Should your item have a detect covered under this warranty, first call the toll free number listed below.
Most problems can be resolved in this manner. It necessary. you will be issued a Return Authorization
number (RA) and instructions on how to obtain a Product Return Form. The Product Return Form Is to be
used when returning a product to us (postage pre-paid and insured by the consumer).
When returning a detective product, please package the product, the Product Return Form and a copy 0!
the dated sales receipt as proof of purchase. Be sure to mark the RA number on the Product Return
Form. lithe product is returned without a dated sales receipt. it will be excluded from coverage under thls
warranty. Please allow 4 to 6 weeks for deliveryol repaired or replacement vehicles (depending on your
location). 7
New Bright Industries' liability for defects in materials and workmanship under this warranty shall be
limited to repair or replacement at our sole discretion. In no event shall we be responsible tor incidental,
consequential or contingent damages (except In those states that do not allow this exclusion or limitation).
Valid only in the USA & Canada.
Contact New Bright Industries Customer Service Toll Free at:
1-OT7-NBl-1OVS
(1 -B77-624—8697)
Monday through Friday, 8:00 AM w 5:00 PM Eastern Time
LlJN117—15
New Bright
Table of Contents
Section 1: Table of Contents
Section 2: Component Checklist \
Section 3: Vehicle Features & Functions
Section 4:
Charging the Battery
Section 5:
Transmitter Battery Installation
Transmitter Features & Functions
Section 6: Proper Use
Precautions & Care
Section 7:
Trouble Shooting & Support
This device complies wiin Industry Canada licence-exempt Rss
Itandard(s) Operation Is subieci to me idllcwing Mo conditions.
(1) uua device may not cause inmflerenoe‘ end (2) this device
must accept any lame/slice. including inteflerence that may
cause undesired operation olthe device
Le present appareil est ccnionne aux CNR d'lndustrie Canada
applicables qu appareiii radio exempt; de licence L‘exuioitalion
c E 1 7 9 7 est autoriaee aux deux conditions suit/ante; : (n rappareil n. don
pas produrre de broulllaue. at (2) I-uunaaieur da l'appareil dolt meme
r dout brouillage radicelecmque suui, meme 3. ie brouilliue est
susceptible d‘en compmmeme le hndionnement
REF-6122251223 150408
New Bright
Component Checklist
Vehicle
Features and Functions
Charge Wheel Alignment
Status Light
USB Charging Port ON/OFF Switch
' ll vehicle pulls to the left or right during forward driving the Wheel Alignment
may need to be adjusted. The Wheel Alignment Dial is located on bottom of
chassis between the front wheels.
Vehicle
Charging the Battery
This vehicle is equipped with an internal Lithium-Ion battery that is recharged via
USB. OWOFF Switch must be in the OFF position prior to charging.
USB Charging Port
1. Locate the ON/OFF switch and small USB port on the under—side of the
vehicle.
2. Turn the ON/OFF switch to the “OFF” position.
3. insert small end of supplied USB cord into the port. The'large end of the
supplied cord can be plugged into any computer or USB outlet brick (not
included).
4. While charging, the LED under the vehicle will be on. Once fully‘ charged
the LED will turn off. Charging is completed in approximately 2 hours.
Remove and store cords when not in use.
Transmitter
Battery Installation
Note: When replacing Transmitter batteries:
Use alkaline batteries only.
Do not mix old and new batteries.
Do not mix alkaline, standard or rechargeable batteries.
Features and Functions
Letthlght
Forward/Reverse
Steerlng
Drlva
This transmitter is equipped with 2.4GHz technology which allows up to 6
vehicles to be raced al the same time.
The transmitter will automatically sync with the vehicle.
Proper Use
Precautions and Care
§<
Switch vehicle OFF
when not in use.
Wipe body with a
soft rag or cloth.
Brush areas where
dirt gets trapped.
ii
SOLVENT
Do not use chemicals
or water to clean.
Trouble Shooting & Support
Problem - Vehicle does not move or moves slowly.
- Make certain there are fresh alkaline batteries in the transmitter and that they
have been installed in the correct position.
-Are the (+) and (-) markings on the alkaline batteries in the same position as
the (+) and (——) markings in the Transmitter Battery Compartment?
- Are the metal contact tabs touching, rusty or dirty in the transmitter?
- Has the vehicle been fully charged?
- Make certain that the vehicle ON/OFF switch is in the “ON” position.
Problem - Vehicle moves by itself or exhibits reduced range from the transmitter.
- Make certain there are no outside radio interference in your area. The best
way to test this is to take the vehicle as far away from radio towers, electrical
lines or tall buildings as possible to ensure no further radio interference
will occur.
Always remove Batteries from transmitter when not in use.
Do not dispose batteries in fire. Leakage. explosion and personal injury
may occur.
Do not attempt jumps or tricks with this vehicle.
Do not attempt to remove internal battery.
Do not use included USB cord for anything other than its intended purpose.
Always keep USB cord stored when not in use.
Adult supervision recommended.
FCC CAUTION:
Changes or modifications not expressly approved by the pany responsible for compliance
could void the user’s authority to operate the equipment.
NOT E: This equipment has been tested and found to comply with the lirnlts for a Class B digital device. pursuant to Part 15 of the
Foo Rules.Thesa limits are designed to provide reasonable protection amt harmful fmerferenoe in e residential
installation, This equipment generates. uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful Interference to rather oornrminicallons. However, there is no guarantee
that imerference will not wear in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which m be determined by turning the equipment off and on. the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Creator                         : Canon iR C3580  PDF
Create Date                     : 2015:05:21 16:14:58+08:00
Producer                        : Canon iR C3580  PDF
Page Count                      : 8

EXIF Metadata provided by EXIF.tools