New Bright Co GRH3 Toy Transmitter & Receiver User Manual

New Bright Industrial Co Ltd Toy Transmitter & Receiver

User Manual.pdf

Download: New Bright Co GRH3 Toy Transmitter & Receiver User Manual
Mirror Download [FCC.gov]New Bright Co GRH3 Toy Transmitter & Receiver User Manual
Document ID3007851
Application ID9qxMYOew/4qBGC1a6Dq7YA==
Document DescriptionUser Manual.pdf
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize61.07kB (763345 bits)
Date Submitted2016-05-27 00:00:00
Date Available2016-05-31 00:00:00
Creation Date2016-05-12 11:32:29
Producing SoftwareAdobe PSL 1.1e for Canon
Document Lastmod2016-05-12 11:35:22
Document TitleUser Manual.pdf
Document CreatorCanon iR-ADV C5035 PDF

CIUTION—EIECIRICAIIIOPERATED PRODUCT:
A “3" NOTRECONHENDED FORCHILDRRI UNDERRYENRSOENRENSHRH
All ELECTRIC PRODUCTS, PRECAUTIONS SHOULD BE OBSERVED
DURING HANDLING AND USE IO PREVENT ELECTRIC SHOCH
INPUT ILUVNCSOIDIUN.OUTPUT:NNIIDC50ONN
OWNER’S MANUAL
Please read and understand all precautions prior to use.
‘ Model / Modéle No.1 GGHZ (Remote), GRH3 (Vehicle)
Thank you for choosing a premium New Bright product,
USA 8r Canada
30-Day Limited Warranty
New Bright Industries warrants to the original purchaser that this product will be tree oi defects in materials and
workmanship lor thirty (30) days item the date 0! purchase. In the event oi such delect within the warranty period.
New Bright will repair or replace the product at our sole discretion. This warranty does not (over damage resulting from
unauthorized modifications. accrdent. misuse. or abuse,
Should your item have a defect covered under this warranty, first call the toll free number lisned helm Most prdierns
can be resolved in this manner. If necessary, you will be issued a Return Aimmrization (RA) number and instructions on
how to obtain a Product Return ForrriJ'he Product Remm Form rs to be used when returning a product to as (posrage
prepaid and insured by the consun‘ter) .4;
when returning a defective product. please package the product. the Product Return Form and a copy of the dated sales
receipt as proof of purchase. Be sure to mark the RA number on the Product Return Form. If the product is returned
without a dated sales receipt. it will be excluded from coverage under this warranty, Please allow 4 to 6 weeks for
delivery of repaired or replacement vehides (depending on your location).
New Bright Industries’ liability for defects in materials and workmanship under this warranty shall be limited to repair or
- replacement at our sole discretion. In no event shall we be responshlelor inridental, consequential or toniingent
damages (exceptin those states that do not allow this exclusion or lImrtation),
Valid only in the USA It Canada
.Contact New Bright Industries Customer Servite toll free at:
1-877-NBHOV5
(MN-6244697) I
Monday through Friday. 8:00AM to so) PM Eastern Tune
E751 (MJNIZHS
(4 ) Body Pins (1 ) Battery Gamer (1 )9.6v Battery Pack 2 AA Batteries
Do not recharge Battery Pack if it is hot or warm to the touch. Allow Battery
Pack to cool before recharging. Recharging a hot or warm Battery Pack will
shorten the life of the Pack.
Do not recharge a Battery Pack if it appears to be damaged or leaking.
Always unplug Charger when not in use.
Always remove Battery Pack from Battery Compartment when not in use.
Do not dispose batteries in fire. Leakage. explosion and personal injury may occur.
Dispose of Lithium Ion Battery Pack properly.
Do not attempt to disassemble Battery Pack or Charger.
Do not use Battery Charger for any use other than instructed in this booklet.
Only an adult should charge Batteries
Do not attempt jumps er tricks with this vehicle.
”m-
.wp‘- .n.
Battery Charging
lMPORTANTl
the included19.§V_ Lithium Ion battery pack is only PARTIALLV CHARGED prior
to shipment and it is recommended the battery be fully charged before first use.
Charging Status
Light
1. Insert the 9.6V Lithium Ion rechargeable battery pack securely into the charger and push
up to lock. Be sure the arrows are properly matched (as shown above).
2. Plug the Charger into a standard indoor electrical outletiThis power unit is intended to be
correctly orientated in a vertical or wall mount position.
3. Allow battery to charge tor 1-1.5 Hours. Charging Status Light will be solid red while battery
is charging. When charging is complete. light will blink green.
tTo remove the battery, press and hold the release button and slide battery down to unlod<.
5. Charge will last approximately 12 minutes depending on terrain and driving style.
IMPORTANT: it is normal lor the battery pack to become warm alter charging and/or use. Be
sure to allow the battery pack to cool before using or recharging Recharging a warm battery
pack will greatly reduce the battery lite.
mErmorl PARENTS:
. The Battery Charger 5. Battery Pack need to be periodically examined for potential
hazards Any potentially hazardous pans need to be repaired or replaced. ,
‘ TRANSMITTER
Battery‘lvnsvtallation
l.Locate and remove the Battery Compartment
Cover
2. Insert 2 'AA' size batteries.
Make sure the positive (+) and negative (—)
markings on the batteries match up to the
ones inside the Battery Compartment.
3. Replace Battery Compartment
Cover making certain that the
Battery Compartment tab has
"snapped” into the locked .
position.
m:m~¢ngnmmmz
Donotmlxuldirdmwmedn
www.mhwwmyfim
llaealullrlhltfilsaiy.
Syncing
This transmitter is
equipped with 246":
technology which allows
up to 12 vehicles to be
rated at the same time.
When both the vehicle
and transmitter have the
batteries correctly
installed and turned on.
the transmitter will
automatically sync with
the vehicle
l PROPER USE ' I
Precautions and Care
Body Shell Removal
Locate the body pins on top of vehicle body.
Pull pins as shown and sel aside.
V~‘
. ' €-
Lifl and remove body shell
Trouble shooting & Support
Problem - Vehicle does not move or moves slowly.
- Make certain there are fresh batteries in the transmitter and that they have been
installed in the correct position
- Are the (+) and H markings on the batteries in the same position as the (+) and H
markings in the Transmitter Battery Compartment?
- Has the Battery Pack been installed in the vehicle?
- Has the rechargeable Battery Pack been lutly charged?
- Are the (+) and (-) mamlngs on the Battery Pack in the same position as the (+) and
H markings in the Battery Compartment?
- Are the metal contact tabs touching, rusty or dirty in the transmitter?
- Make certain that the vehicle ON/OFF switch is in the "ON" position.
Problem - Vehicle moves by itsell or exhibits reduced range trom the transmitter.
ur area, The best way to test
- Make certain there is no outside radio interterence in yo
this is to take the vehicle as tar away trorn radio towers, electrical lines or tall
buildings as possible to ensure no turther radio interference will occur.
FCC CAtmON: ‘ A
Changes or modifications not expressly approved by the party responsble lot compliance could
void the users authority to operate the equipment
NOTEflhlssqmpmnlhasbmwodan:bummcornptywithlteinitslouosssfltfigitlldmpursuammPantaotm
FCC RulesrTheu limbs uldeagtodtcprwidereasuubte protection Igninetnarrnlui undermine M
wtulmtmismprwlwwatss uses undo-n Marianne trauma my and. flnotmllodwueedln
wwwumms me] cause hlnnhll "Mammal: WW5. Hmr. there isnoguaramu
midsrterencevfllnflwinnparfimwmm ilmmprrmtdouc-uhmmilnmlaremtnrmioor
telwiilortreoeuion.vmichmhedotermmdbywmngmcequrpmoflmm.mwkermlgedmlrybm
mmrtmmbyomormotwmmm:
~Rmrlarelocalethorlcotvhgmm.
-|ncruuelhesepualim humanitiesqummw reeervlr.
.Wmmpmrrmmmotmammmmlmm»
.mnwmerummmmvmum
Mthlreodvflieonnom,
— cautions
Do not leave the toy unattended while charging it.
Battery charging should be done by adults.
Charge the toy on a non-flammable surface and keep it away from
flammable items
Turn the charger off when the toy’s battery is charged, and always
unplug it from the toy.
Disconnect AC wall chargers from outlets while not in use
If the toy has been damaged, immediately stop use, unplug, and
safety move the toy away from flammable materials,
Follow the manufacturer’s instructions for charging the toy. DO NOT
charge longer than recommended
RSS Statement
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may
not cause interference, and (2) this device must accept any interference.
including interference that my cause undesired operation of the device.
Le present apporeil est conforme aux CNR d'Industr-ie Canada applicables
aux appareils radio exempts de licences L‘exploitation est autorise’e aux
deux conditions suivantes 2 (1) l'appar-eil ne doit pas produire de brauillage,
et (2) l'utilisateur de l‘appareil doit accepter dout brouillage radioélectr-ique
subi, meme si Ie brouillage est susceptible d'en compromettre le fonctiannement.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Create Date                     : 2016:05:12 11:32:29+08:00
Creator                         : Canon iR-ADV C5035  PDF
Modify Date                     : 2016:05:12 11:35:22+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Creator Tool                    : Canon iR-ADV C5035  PDF
Metadata Date                   : 2016:05:12 11:35:22+08:00
Producer                        : Adobe PSL 1.1e for Canon
Format                          : application/pdf
Document ID                     : uuid:5cf93357-0000-001e-8f33-0f6300000000
Instance ID                     : uuid:7af10be5-9825-4400-9bec-85ef96e4be9e
Page Count                      : 8
EXIF Metadata provided by EXIF.tools
FCC ID Filing: G6DGRH3

Navigation menu