Newcont Electronic 63201 2.4GHz 40-Chnnl Crdls Phn w/ CID & Call Waiting User Manual 6304

Download:
Mirror Download [FCC.gov]
Document ID	286127
Application ID	ra9XQk1nnvhjZgOdZFFkOQ==
Document Description	revised users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	201.47kB (2518362 bits)
Date Submitted	2002-11-26 00:00:00
Date Available	2002-06-17 00:00:00
Creation Date	2002-11-26 16:10:25
Producing Software	Corel PDF Engine Version 9.397
Document Lastmod	2002-11-26 16:16:37
Document Title	6304
Document Creator	CorelDRAW Version 9.397
Document Author:	JWM

NEWCONT
NEWCONT
2.4GHz CORDLESS CALLER ID
TELEPHONE WITH CALL WAITING
40 CHANNEL AUTOSCAN
NTP-6304D
OWNER'S MANUAL
INSTALLATION AND
OPERATING
INSTRUCTIONS
NEWCONT
PLEASE READ THIS
MANUAL CAREFULLY
BEFORE USE.
KEEP FOR
YOUR REFERENCE.
Made in China
2002.8
Special Features
ongratulations on your selection of a quality NEWCONT product. With
proper care and by following the setup and user instructions in this manual,
this unit will provide you with years of trouble free service.
NEWCONT is committed to providing quality products that fit your needs. We
would like to have any comments or suggestions you might have on this product .
You may mail your comments to:
40 Floor, Block C, Electronics science &Technology Bldg,
Shennanzhonglu, Shenzhen , P.R.C
518031
website: www. newcont. com
When examining your new NEWCONT cordless telephone, you will find an array of special
features including:
Filtered Sound System - Receives considerably less noise than conventional cordless
telephones because of a special circuit which delivers the clearest possible reception.
40 Channel Auto Scan - Press the
DEL
/SCAN button on the HANDSET to find and lock
on to the clearest channel for any call.
TONE or PULSE Dialing - Use this phone for either TONE or push-button PULSE(rotary )
dialing .
Automated Functions - Redial the last number called and automatic STANDBY mode.
Security - Ensures greater privacy because a built-in security code with 65,536 combinations prevents use of your telephone line by another nearby cordless phone.
Dependable Battery - Recharge your BATTERY PACK many times with the built-in charger
The battery low warning tone tells you when the BATTERY PACK needs recharging
(See page 26)
Special Services - Use the
/ FLASH button to access special services such as Call
Waiting supplied by your telephone company or company switchboard .
STANDBY Mode - When in STANDBY mode (ON-HOOK),the telephones is capable of
receiving a call. When the HANDSET is on the BASE UNIT, it is automatically in the
STANDBY mode ( ON-HOOK).When the HANDSET is taken off the BASE UNIT, it
remains in the STANDBY mode until you activate the
TALK
button.
Battery Power Saver - Once fully charged, in STANDBY mode, the HANDSET can
receive/send calls for a maximum of three days without the need for recharging. Length
of charge depends on frequency of use.
Special Features
Luminous LCD Screen - The LCD Screen emits light for 8 seconds every time you press
any of the TELEPHONE KEYPAD buttons.
HANDSET Ringer Volume Level - Select the ringer volume level (HI, LOW, OFF).
HANDSET Volume Control Switch - Select the receiver volume level(HI.MID,LOW).
HEADSET JACK - Your telephone can utilize a headset for hands-free communication
BELT CLIP- Use the BELT CLIP to hang your HANDSET on your belt.
CALLER ID SYSTEM
Multi-Function Large LCD Screen - Shows the number you are dialing and with Caller
ID service (available through subscription from your local telephone company), displays
information about the caller before you answer the call.
Name and Number Directory - Stores up to 64 names and numbers so that you can call
them with a single key stroke.
Caller List - Available with Caller ID service .Stores up to 80 calls to keep track of everyone who called. The name, phone number ,time and date of the call are recorded.
Allows you to return their calls with a single key stroke .
Preferred Calls - You can mark the name and number of a welcome caller in the DIRECTORY. When that number calls in, the caller's name will appear on the DISPLAY and
a special ring sound will be heard.
Blocked calls - You can mark the name and number of an unwelcome caller in the DIRECTORY When that number calls in, the caller's name will appear on the DISPLAY and
the ringer will be disabled.
Repeat Call Indicator - Shows if a new incoming call has called more than once.
Out of Area Call Indicator - Advises you that the incoming call is not in a Caller ID
service area.
Call Waiting Service - Displays the name and number of the second caller, if you have
subscribed for Call Waiting service from your local telephone company (see page 12).
Voice Mail - Indicates message waiting signal if you subscribed to Voice Mail message
service and requested Visual Message Indication from your local telephone
company. (see page 12).
HANDSET Controls
Notes
IMPORTANT
In order to get maximum life from the HANDSET
battery pack, be sure to charge the HANDSET
for 12 hours before initial use.
1. HANDSET ANTENNA
2.NEW CALL/MESSAGE
WAITING LED
INDICATOR
IMPORTANT
9. VOLUME CONTROL
(HI, MID, LOW) SWITCH
3.LARGE LCD SCREEN
NEW CALL
MSG WAITING
LDCCF
CALLS BATT MSG DIR
Placing your BASE UNIT near appliances such
as televisions, refrigerators, radios, or microwave
ovens may cause interference.
10. BATT LOW
INDICATOR
IMPORTANT
AM
PM
MIN
NEW
SEC RPT
TOTAL
CALLER ID SYSTEM
11. SCROLL UP-DOWN/
When you hear interference, press the
button to charge the operating channel.
DEL
/SCAN
SHIFT LEFT-RIGHT
4.TALK BUTTON
TALK
BUTTON
12. HEADSET JACK
ABC
GHI
MNO
WXYZ
TUV
13. TELEPHONE KEYPAD
OPER
DIR
7. FUNCTION /VOICE
IMPORTANT
The AC ADAPTOR must always be plugged
into an electrical outlet.
JKL
PQRS
5. TEMPORARY TONE
( ) BUTTON
6. DIRECTORY BUTTON
DEF
EDIT
FUNC
FLASH
VOICE MAIL
SAVE
RE/PA
DEL
SCAN
14. SAVE/REDIAL/PAUSE
BUTTON
15. SCAN/DEL(DELETE)
BUTTON ,
MAIL BUTTON
IMPORTANT
To obtain the best reception, be sure to r aise
the BASE UNIT ANTENNA.
8. FLASH/EDIT BUTTON
IMPORTANT
16. CHARGE CONTACTS
If you live in an area which gets frequent
thunderstorms, we strongly recommend plugging
your AC ADAPTOR into a surge protector.
30
Technical Information
HANDSET Controls
Technical Information
1.HANDSET ANTENNA
This cordless telephone uses radio frequencies to allow mobility. There are certain
difficulties in using radio frequencies with a cordless telephone. While these are normal,
the following could after operation of your system.
2. NEW CALL/MSG(MESSAGE )WAITING LED Indicator: Blinks when recording a new
incoming call or when receiving a Message Waiting signal, if you have subscribed to a
Voice Mail message service from your local telephone company. (See page 11 ).
Noise
3. Large LCD Screen: Shows call information, phone status, prompts and directory items.
Electrical pulse noise is present in most homes at one time or another. This noise in
most intense during electrical storms. Certain kinds of electrical equipment such as light
dimmers, fluorescent bulbs, motors, and fans also generate noise pulses. Because radio
frequencies are susceptible to these noise pulses, you may occasionally hear them in
your HANDSET. Generally they are a minor annoyance and should not be interpreted as
a defect in your system.
Range
Because radio frequency is used, location of the BASE UNIT can affect operating range.
Try several locations in your home or office and pick the one that gives you the clearest
signal to the HANDSET.
Interference
Electronic circuits activate a relay to connect the cordless telephone to your telephone line.
These electronic circuits operate in the radio frequency spectrum. While several protection
circuits are used to prevent unwanted signals, there may be periods when these
unwanted sign als enter the BASE UNIT. You may hear clicks or hear the relay activate
while your are not using the HANDSET. If interference occurs frequently, it can be minimized or eliminated by lowering the height of your BASE UNIT ANTENNA or by relocating
the BASE UNIT. You can check for interference before selecting the final BASE UNIT location by plugging in the phone.
NOTICE:
This cordless telephone uses radio communication between the HANDSET and the
BASE UNIT and may not ensure privacy of communication. Other devices, including other
cordless telephones, may interference with the operation of this cordless telephone or
cause noise during operation. Units not containing coded access may be accessed by
other radio communication systems. Cordless telephones must not cause interference to
any licensed radio service.
4. TALK TALK Button: Press to answer an incoming call or to place a call. Press to end
a call.
5. TEMPORARY TONE
Button: Press to temporarily change the dialing mode
from PULSE to TONE for rotary service users . (Press once before entering numbers to
access the Answering System or electronic banking services, etc.)
6. DIR button: Press to access names and numbers stored in the DIRECTORY.
7. FUNC(FUNCTION)/VOICE MAIL
/VOICE MAIL Button: (FUNCTION)- Press
and hold down to access Special functions operation in STANDBY mode. (For special
functions see page 19). (VOICE MAIL) - Press to automatically dial the Voice Mail Post
Code in your area to access your Voice Mail message in HANG-OFF mode. (Format) Press to change the format of the displayed number when reviewing the Caller ID list or
phone book.
8.
/FLASH button: (FLASH) Press to answer a call if you have Call Waiting.
(EDIT) Press to edit listed items.
9. BATT LOW INDICATOR :Appears on the LCD Screen when the battery charge is low.
(See page 26 for detail)
10.
Button: Press to move around the Large LCD Screen.
11. HANDSET Volume Control(hi,mid ,low) Switch: Select the receiver volume level
(HI, MID, LOW).
12. HEADSET JACK: For connection your headset plug to enjoy hands-free
communication.(See page 10 for detail.)
13. TELEPHONE KEYPAD: Allows you to make a call depending on pressed button.
(for TELEPHONE KEYPAD characters, see page 24.)
14.
RE/PA Button: (SAVE )Press and hold down to save the changes on the listed
items. (REDIAL) Press to redial the last number you dialed. (PAUSE) Press to insert a
SAVE
When you hear interference, press the DEL /DEL
button to charge the operating channel.
pause while dialing. (You will need the SAVE RE/PA button to dial numbers which use
an alternative Long Distance Access Code.)
15. DEL /SCAN button: (SCAN) Press to change the operating channel when you hear
interference. (DELETE) press and hold down to delete items or individual characters.
16. CHARGE CONTACTS: For charging the BATTERY PACK inside the HANDSET. We
recommend cleaning the CHARGE CONTACTS periodically with a damp cloth.
29
IMPORTANT
Problem Solving
BASE UNIT CONTROLS
Problem Solving section
For your assistance, we have listed below a few common problems.
Phone does not work, check the following:
1. BASE UNIT is plugged into power source.
2. HANDSET is charged.
3. TONE/PULSE Select switch is in the right position.
4.TELEPHONE LINE CORD is plugged in the TELEPHONE JACK.
1. TELEPHONE LINE
CONNECTION JACK
2. POWER-IN
CONNECTION JACK
3. TONE/PULSE
SELECT SWITCH
Range of phone limited, check the following:
1. ANTENNA on BASE UNIT is raised.
2. BASE UNIT is centrally located in your residence.
3. BASE UNIT is not located near appliances.
No dial tone, check the following:
1. TELEPHONE LINE CORD plugs are connected to the TELEPHONE JACK and
TELEPHONE LINE CONNECTION JACK.
2. BASE UNIT is plugged into a power source.
3. IF you had a power failure or had unplugged the BASE UNIT, replace the HANDSET
on the BASE UNIT for 2 to 5 seconds to reset the system.
2.4GHz
4. BASE UNIT
ANTENNA
PAGE
6.PAGE BUTTON
Received signal flutters or fades, check the following:
1. BATTERY PACK in HANDSET is fully charged.
2. HANDSET is not far from the BASE UNIT.
3. ANTENNA on BASE UNIT is raised.
Interference on reception, check the following:
1. Noise may be picked up from electrical products in the home or electrical storms.
Generally, this noise is a minor annoyance and should not be interpreted as a defect
in your system. (See Technical Information on page 31.)
2. Choose an alternate channel using the DEL /SCAN button on the HANDSET.
Long Distance "LDC" Indicator is not ON when receiving long distance call, check
the following:
1. Your local telephone company can provide the Area Code on an incoming long distance
call.
IN USE CHARGE
5.IN USE/CHARGE
LED INDICATOR
7.CHARGE
TERMINALS
Excess static, check the following:
1. Check to see that the ANTENNA is not touching another metal object.
2. Raise or reposition the BASE UNIT ANTENNA.
If after pressing the TALK button, you receive three "beeps" and no dial tone,
check the following:
1. BASE UNIT is plugged into power source.
2. If you had a power failure or had unplugged the BASE UNIT, replace the HANDSET
on the BASE UNIT for 2 to 5 seconds to reset the system.
NOTE:
If none of the telephones in the house are working, disconnect one set at a time to verify
that none of the phones are causing the problem. If you still have a problem after doing
this, and your telephone still does not work, please contact your local phone company.
28
Changing the Battery Pack
BASE UNIT CONTROLS
Changing the BATTERY PACK
1. TELEPHONE LINE CONNECTION JACK
The BATTERY PACK provides power for the HANDSET of your cordless telephone.
2. POWER-IN CONNECTION JACK
3. TONE/PULSE Select Switch
To Replace the BATTERY PACK:
1. Remove the HANDSET BATTERY COMPARTMENT COVER by sliding it down.
2. Pull out the BATTERY CONNECTOR PLUG and remove the BATTERY PACK.
4. ANTENNA: Raise or reposition for the best reception.
5. IN USE/CHARGE LED Indicator: (IN USE) Lights up to indicate that the HANDSET
is in TALK mode or an extension telephone is in use. (CHARGE) Lights up when the
HANDSET is placed on the BASE UNIT for charging.
6. PAGE
3. Plug the new BATTERY PACK into the BATTERY CONNECTOR.
PAGE
Button : Press to page the HANDSET.
7. CHARGE TERMINALS: For charging the HANDSET BATTERY PACK. For best
4. Slide the HANDSET BATTERY COMPARTMENT COVER firmly into place in its
closed position.
performance ,clean the CHARGE TERMINALS periodically with a damp cloth.
5. Before use, charge the new BATTERY PACK for 12 hours.
ATTENTION:
The telephone that you have purchased contains a rechargeable BATTERY PACK. The
BATTERY PACK is recyclable. At the end of its useful life, under various state and local
laws, it may be illegal to dispose of this BATTERY PACK into the municipal waste stream.
Check with your local solid waste officials for details in your area for recycling options
or proper disposal.
BATTERY
CONNECTOR
BATTERY
BATTERY PACK
PLUG
BATTERY PACK
COMPARTMENT
COVER
CAUTION
Any changes or modifications not expressly approved
by the party responsible for compliance could avoid the
Remove the HANDSET BATTERY COMPARTMENT
user's authority to operate the equipment.
COVER by sliding it down.
27
Contents
Recharging the Battery Pack
Safety Instructions............................................................................................................3
Battery Type
Getting Started................................................................................................................. 5
Use the following type and size of BATTERY PACK:
Cordless Telephone BATTERY PACK 3.6V, 600mAh
Cordless Telephone Operation.........................................................................................8
Preparing for Use.....................................................................................................8
Receiving Calls ......................................................................................................8
NOTE: During a power interruption, the BASE UNIT does
not operate, and a phone conversation cannot be
made on the HANDSET.
Placing Calls...........................................................................................................9
Ni-MH
Using the Headset Feature...................................................................................10
Recharging the Battery Pack
Redial Feature......................................................................................................10
The nickel metal hydride(Ni-MH) BATTERY PACK in the HANDSET can be recharged many
times using the built-in charger in the BASE UNIT.
Caller ID System Operation............................................................................................11
Caller ID System......................................................................................................11
Viewing Caller Information During Incoming Calls.............................................11
Message Waiting ..............................................................................................11
Call Waiting .......................................................................................................12
When the BATT LOW symbol appears on the LCD screen , a "beep" sound will be heard
every 10 seconds. This indicates that the BATTERY PACK needs to be recharged.
Charge the BATTERY PACK at least once every 90 days of non-use to avoid battery
failure. When the BATTERY PACK can no longer be charged, replacement of the
BATTERY PACK will be necessary.
Voice Mail Function...........................................................................................12
Forwarded Call..................................................................................................12
Long Distance Call.............................................................................................12
Caller List ...............................................................................................................12
Viewing the Caller List ................................................... ..................................13
Placing a Call from the Caller List .....................................................................13
Saving the Name and Number in the Caller List into the Phone Book..............13
The BATTERY PACK used in your telephone may develop a condition known as
"MEMORY". Once subjected to a regular short discharging routine, the BATTERY PACK
assumes the discharging pattern it was subjected to. This causes rapid discharging
thereby shortening the BATTERY PACK charge span. If you believe your BATTERY PACK
has developed a "MEMORY "condition, do not charge the HANDSET until the BATT LOW
symbol appears on the LCD Screen. When the BATT LOW symbol appears on the LCD
Screen, charge the HANDSET fully for 12 hours.
Deleting All Records in the Caller list............... ................................................14
Selective Deleting in the Caller List...................................................................14
Phone Book............................................ ..........................................................14
Viewing the Phone Book....................................................................................14
Speed Viewing the Phone Book................................... . ...................................15
IMPORTANT
In order to get maximum life from the HANDSET
BATTERY PACK, be sure to charge the HANDSET
for 12 hours before initial use.
26
Security
Contents
NOTES:
1. You can store a maximum of 16 characters on the letter icon.
2. You can store a maximum of 16 digits on the number icon.
Saving in the Phone Book.............................................................................15
Security System
Blocked Calls................................................................................................15
Your cordless telephone uses a digital coding security system to prevent unauthorized
use of your telephone line by another nearby cordless telephone. The system has its
own identifying signal created by microcomputers in both the BASE UNIT and the
HANDSET.
Editing the Number in the Phone Book ......................................................... 16
Security Code
Selective Deleting in the Phone Book.............................................................18
This telephone has an internal security code with 65,536 possible combinations.
Resetting Security Code and Channel Information
Preferred Calls.............................................................................................. .15
Placing Calls from the Phone Book................................................................17
Deleting All Records in the Phone Book.........................................................18
Function Operation.................................................................................................19
Communication between HANDSET and BASE UNIT may not be possible in any of
the following situations:
1. After a power failure.
2. After relocating the BASE UNIT by disconnecting the AC ADAPTOR.
3. After replacing the HANDSET BATTERY PACK.
A. Language ...................................................................................................20
To reset, place the HANDSET on the BASE UNIT for 2 to 5 seconds.
E. LCD Contrast .............................................................................................21
Multi-Channel Access
F. AREA CODE................................................................................................21
Your cordless telephone lets you select a channel from the 40 frequencies available to
transmit signals between the BASE UNIT and the HANDSET. When you notice
interference from other cordless telephones, change to another channel by pressing
the DEL /SCAN button on the HANDSET.
G. Flash Time..................................................................................................22
B. First Ring On/Off.........................................................................................20
C. Time Set.....................................................................................................20
D. Ringer Volume............................................................................................21
H. Pause Time.................................................................................................22
I. Voice Mail.....................................................................................................23
J. MSG Waiting(Message Waiting)...................................................................23
Telephone Keypad Characters...............................................................................24
Security............................................................................................................................25
Recharging the BATTERY PACK....................................................................................26
Changing the BATTERY PACK.......................................................................................27
Problem Solving..............................................................................................................28
Technical Information.......................................................................................................29
25
Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS
To reduce the risk of fire, electric shock and /or injury, always follow these
basic safety precautions when using your cordless telephone equipment.
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the telephone.
3. Do not use this telephone near a bathtub, kitchen sink, wash bowl, laundry tub,
in a wet basement, near a swimming pool, or anywhere else where there is water.
4. Avoid using a telephone(other than a cordless type) during an electrical storm.
There may be a remote risk of electric shock from lighting.
5. Do not use the telephone to report a gas leak in the vicinity of the leak.
6. Use only the power cord and BATTERY PACK indicated in the Owner's Manual.
Do not dispose of the BATTERY PACK in a fire .The BATTERY PACK may explode .
Check with local codes for possible special disposal instructions.
7. Unplug this telephone from the wall outlet before cleaning or replacing
the BATTERY PACK. Do not use liquid cleaners or aerosol cleaners on the
telephone. Use a damp cloth for cleaning.
8. Place this telephone on a stable surface. Serious damage and/or injury may result
if the telephone falls.
9. Do not cover the slots and openings on this telephone. This telephone should never
be placed near or over a radiator or heat register. This telephone should not be
placed in a built-in installation unless proper ventilation is provided.
10.Operate this telephone using the electrical voltage as stated on the BASE UNIT or
in the Owner's Manual .If you are not sure of the voltage in your home , consult your
dealer or local power company.
11.Do not place anything on the power cord. Install the telephone where no one will
step or trip on the cord.
12.Do not overload wall outlets or extension cords as this can increase the risk of fire
or electric shock.
13.Never push any objects through the slots in the telephone. They could touch
dangerous voltage points or short out parts that could result in a risk of fire or
electric shock. Never spill liquid of any kind on the telephone.
14.To reduce the risk of electric shock, do not take this telephone apart. If service
or repair work is required on this telephone, take it to a qualified service
representative. Opening or removing covers may expose you to dangerous voltage
or other risks. Incorrect reassembly can cause electric shock when the appliance is
subsequently used.
15. Unplug this telephone from the wall outlet and consult a qualified service
representative in any of the following situations:
A. When the power supply cord is frayed or damaged.
B. If liquid has been spilled into the telephone.
C. If the telephone has been exposed to rain or water.
D. If the telephone does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions. Improper
adjustment may require extensive work by a qualified technician to restore the telephone
to normal operation.
Caller ID System Operation
TELEPHONE KEYPAD Characters
The TELEPHONE KEYPAD
button are used to enter characters when
WXYZ
entering names. You can enter names in the UPPER CASE or LOWER CASE letters.
Press the appropriate TELEPHONE KEYPAD button to get the following characters.
KEYPAD
BUTTONS
CHARACTERS
SPACE1 &' ( ).
ABCabc2
DEFdef3
GHIghi4
JKLjkl5
MNOmno6
PQRSpqrs7
TUVtuv8
WXYZwxyz9
EXAMPLE:
If you want to enter the character "Abc" on the HANDSET LCD Screen.
1. Press the
DIR
2. Press the
EDIT
button.
/EDIT Button.
3. Press the TELEPHONE KEYPAD ABC button,"A" will be displayed. The cursor will
automatically move to the next character after 2 seconds.
4. Press the TELEPHONE KEYPAD
ABC
button for 5 times to display"b".
5. Press the TELEPHONE KEYPAD
ABC
button for 6 times to display"c"
The cursor will automatically move to the next character within 2 seconds after entering
the first character. Press the SHIFT RIGHT
button to produce a space. If you want
to change any character, you can go back to the incorrect character by pressing
the SHIFT LEFT
button. To delete the character inside the cursor, press the
DEL /SCAN button.
24
Caller ID System Operation
Safety Instructions
I .VOICE MAIL
E. If the telephone has been dropped or the case has been damaged.
F. If the telephone exhibits a distinct change in performance.
16. Never install telephone wiring during a lighting storm.
17. Never install telephone jacks in wet locations unless the jack is specifically designed
for wet locations.
18. Never touch uninsulated telephone wires or terminals unless the telephone line has
been disconnected at the network interface.
19. Use caution when installing or modifying telephone lines.
This telephone enables you to store the Voice Mail Post Code number in your area.
This will automatically connect you to the Voice Mail service provider with one touch
dialing.
1. Press the
/VOICE MAILbutton and hold down.
2. Press the TELEPHONE KEYPAD
3. Press the
WXYZ
button.
/FLASH button.
4. Enter the Voice Mail Post Code number by using the TELEPHONE KEYPAD
OPER
WXYZ
buttons.
5. Press and hold down the
6. Press the
SAVE
SAVE
/RE/PA button.
/RE/PA button to return to STANDBY mode.
J. MSG Waiting (Message Waiting )
To turn off the Message Waiting LCD Screen indicator.
1. Press the
/ VOICE MAIL button and hold down.
2. Press the TELEPHONE KEYPAD
3. Press the
OPER
button.
/ FLASH button.
4. Press the SCROLL UP
or DOWN
when MSG Waiting is active.
5. Press and hold down the
6. Press the
SAVE
button to select MSG Waiting ON or OFF
RE/PA button.
/VOICE MAIL button to return to STANDBY mode.
IMPORTANT:
Message waiting LCD Screen indicator will automatically turn ON. If you have
subscribed to Voice Mail message service and if yo have Visual Message indication
from your local telephone company.
IMPORTANT
In order to utilize the Caller ID feature, you
must subscribe to Caller ID service from
your local telephone company.
23
Battery Safety
CAUTION:
Danger of explosion if the BATTERY PACK is incorrectly replaced. Replace
only with the same or equivalent type.To reduce the risk of fire or personal
injury, read and follow these instructions:
1. Use only the following type and size BATTERY PACK:
Cordless Telephone BATTERY PACK
3.6V, 600mAh.
Ni-MH BATTERY
2. Do not dispose of the BATTERY PACK in a fire. It may explode. Check with local codes
for possible special disposal instructions.
3. Do not open or mutilate the BATTERY PACK. Released electrolyte from a BATTER
PACK is corrosive and may cause damage to the eyes or skin. Electrolyte may be
toxic if swallowed.
4. Exercise care in handling the BATTERY PACK to prevent shorting the BATTERY PACK
with conductive material such as rings, bracelets and keys. The BATTERY PACK or
conductor may overheat and cause burns.
5. Charge the BATTERY PACK provided with (or identified for use with) this telephone
only in accordance with the instructions and limitations specified in this manual.
6. Observe proper polarity orientation between the BATTERY PACK and BATTERY
CHARGER.
SAVE THESE INSTRUCTIONS.
ATTENTION:
The telephone that you have purchased contains a rechargeable BATTERY PACK. The
BATTERY PACK is recyclable. At the end of its useful life, under various state and local
laws, it may be illegal to dispose of this battery into the municipal waste stream. Check
with your local solid waste officials for details in your area for recycling options or proper
disposal.
Getting Started
Connecting Your Phone
This section is a reference guide to the basic functions and operations of your cordless
telephone. For more detailed descriptions of the operations and features of this telephone,
refer to the Contents on page 1.
1. Carefully remove your cordless telephone from its shipping carton. If there is any
visible damage, do not attempt to operate this equipment. Return it to the place of
purchase.
2. Check to be sure you have all items that come with this cordless telephone system.
You should have a HANDSET, BASE UNIT, AC ADAPTOR, TELEPHONE LINE
CORD, SHORT TELEPHONE LINE CORD ,BELT CLIP and Owner's Manual.
Caller ID System Operation
4. Use the dial pad to enter the three digit area code there your phone numbers
begins with.
5. Press and hold down the
6. Press the
SAVE
/RE/PA button.
/ VOICE MAIL button
to return to STANDBY mode.
G. FLASH TIME
2.4GHz
PQRS
OPER
This unit enables you to select the standard FLASH TIME applicable to your calling
area. If you are not sure of the FLASH TIME you are using ,call your local telephone
company.
/ VOICE MAIL button and hold down.
1.Press the
2.Press the TELEPHONE KEYPAD PQRS
button.
3.Press the EDIT /FLASH button.
4.Press the SCROLL UP
or DOWN
button to select the FLASH TIME. The
preset FLASH TIME is 600 milliseconds.
5.Press and hold down the SAVE /RE/PA button.
/ VOICE MAILbutton to return to STANDBY mode.
6.Press the
IN USE CHARGE
H. PAUSE TIME
This unit enables you to adjust the PAUSE TIME when placing a call using a
switchboard system or dialing a Long Distance calls.
1. Press the
/ VOICE MAIL
button and hold down.
2. Press the TELEPHONE KEYPAD
3. Press the
3. Insert the small plug on the end of the AC ADAPTOR into the POWER-IN CONNECTION JACK at the back of the BASE UNIT.
4. Plug the AC ADAPTOR into a 120V AC wall outlet.
USE ONLY WITH CLASS 2 POWER SOURCE 9V DC,300mA
5. Insert one plug of the TELEPHONE LINE CORD into the house TELEPHONE JACK
and the other end into the TELEPHONE LINE CONNECTION JACK at the back of the
BASE UNIT. (If you have an older 4-prong TELEPHONE JACK, you will need an
RJ-11C TELEPHONE JACK ADAPTOR. This adaptor is available at the same place
you purchased your telephone.)
6. Raise or reposition the ANTENNA on the BASE UNIT for the best reception.
7. We recommend not placing this unit next to appliances, Doing so may cause
interference.
EDIT
button.
TUV
/FLASH button.
4. Press the SCROLL UP
OR DOWN
preset pause time is 4 seconds.
5. Press and hold down the
6. Press the
/ VOICE MAIL
SAVE
button to adjust the pausing time. The
/RE/PA button.
button to return to STANDBY mode.
22
Caller ID System Operation
6. Press the
/ VOICE MAIL button
to return to the STANDBY mode.
NOTE: The date and time will automatically set, if you have subscribed to the Caller ID
service from your local telephone company.
D. RINGER VOLUME
This function enables you to adjust the ringer volume from HI, LOW and OFF as
desired.
1. Press the
/ VOICE MAIL button
and hold down.
2. Press the TELEPHONE KEYPAD
3. Press the
EDIT
GHI
SAVE
2. Press the TELEPHONE KEYPAD
button.
/FLASH button.
4. Press the SCROLL UP
OR DOWN
button to adjust the brightness of the
LCD Screen. Level 4 is the preset brightness.
6. Press the
SAVE
/ VOICE MAIL
/RE/PA button until a confirmation"beep" is heard.
button to return to STANDBY mode.
F. AREA CODE
At any time during options programming of a home area code where 7-digit is using
for ease of call back and others features cdo not program if you use 10-digit to call
numbers in your area.
1. Press the
/ VOICE MAIL button
and hold down.
2. Press the TELEPHONE KEYPAD
3. Press the
EDIT
TONE PULSE
9VDC 300mA
TELEPHONE LINE
CONNECTION
JACK
TEL LINE
120VWALL
OUTLET
AC ADAPTOR
TELEPHONE
JACK
/RE/PA button.
E. LCD CONTRAST
This unit enables you to select 8 brightness levels for the Large LCD Screen.
/ VOICE MAIL button and hold down.
1. Press the
5. Press and hold down the
POWER-IN
CONNECTION
JACK
TELEPHONE LINE CORD
button to return to STANDBY mode.
/ VOICE MAIL
EDIT
TONE/PULSE
SELECT SWITCH
/FLASH button.
5. Press and hold down the
3. Press the
BASE UNIT
BASE UNIT
ANTENNA
4 button.
4. Press the SCROLL UP
OR DOWN
button to adjust the ringer volume
suitable for your convenience. HI is the preset ringer volume.
6. Press the
Getting Started
MNO
button.
8. Install the BATTERY PACK by plugging it
into the BATTERY CONNECTOR inside the
BATTERY COMPARTMENT.
9. Place the BATTERY PACK inside the
BATTERY COMPARTMENT.
10.Slide the HANDSET BATTERY COMPARTMENT COVER firmly into place in its closed
position.
11.IMPORTANT:Before initial use, charge the
HANDSET for 12 hours.
12.TONE/PULSE Select Switch:
A. If your home is equipped with a tone
dialing system, set the TONE/PULSE
select switch to the TONE position.
B. If you have a rotary dialing system, set
TONE/PULSE select switch to the
PULSE position.
C. If you are unsure which system you have,
set the TONE/PULSE select switch to the
TONE position. Press the TALK button
on the HANDSET to make a call. If the
call connects, leave the switch as is;
otherwise set to the PULSE position.
/FLASH button.
21
BATTERY PACK
BATTERY
CONNECTOR
BATTERY
COMPARTMENT
COVER
Getting Started
Caller ID System Operation
A. LANGUAGE
HANDSET
TALK
This telephone offers English, Spanish and French languages for your convenience.
1. Press the
/ VOICE MAIL button
and hold down.
2. Press the TELEPHONE KEYPAD
3. Press the
LDCCF
AM
PM
Press the TALK button to confirm that
you have a dial tone. If you do not get a
dial tone, review steps 3 through 12. If
you still do not have a dial tone, refer to
the Problem Solving section on page 30.
CALLS BATT MSG DIR
MIN
NEW
SEC RPT
TOTAL
button.
/FLASH button.
EDIT
4. Press the SCROLL UP
or DOWN
French.English is the preset language.
5. Press and hold down the
6. Press the
SAVE
button to select English, Spanish, or
/RE/PA button.
/ VOICE MAIL button
to return to STANDBY mode.
BELT CLIP HOOK
B. FIRST RING ON/OFF
PQRS
This telephone will generate the first ring sound even in the BLOCKED CALL mode to
indicate that you have an incoming call. To keep silent in the BLOCKED CALL mode,
you can turn off the first ring sound.
WXYZ
OPER
1. Press the
/ VOICE MAIL button
and hold down.
2. Press the TELEPHONE KEYPAD
3. Press the
With the back of the HANDSET facing up, insert
one side of the BELT CLIP HOOK into the
matching slot at the top side of the HANDSET.
Press down on the opposite side of the BELT
CLIP until the other hook locks Into the slot on
the side of the HANDSET.
EDIT
button.
ABC
/FLASH button.
4. Press the SCROLL UP
or DOWN
setting. SILENT OFF is the preset mode.
5. Press and hold down the
6. Press the
SAVE
button to select the SILENT ON/OFF
/RE/PA button and hold down.
/ VOICE MAIL button
to return STANDBY mode.
C. TIME SET
13. Set the date and time.
You are now ready to use your new
NEWCONT Cordless Telephone
Set the date and time
/ VOICE MAIL button hold down..
1. Press the
2. Press the TELEPHONE KEYPAD
3. Press the
IMPORTANT
In order to utilize the Caller ID feature, you
must subscribe to Caller ID service from
your local telephone company.
EDIT
DEF
button.
/FLASH button.
4. Press the SCROLL UP
or DOWN
minute. To move cursor, press SHIFT LEFT
5. Press and hold down the
SAVE
/RE/PA button.
20
to enter the month, date, hour and
or RIGHT
Caller ID System Operation
Cordless Telephone Operation
Function Operation
Preparing for Use
This unit contains the following special functions:
Before you can use cordless telephone ,you must charge the HANDSET for 12
hours. Failure to do so will require recharging of the BATTERY PACK more often.
(See page 26 for more information on the BATTERY PACK)
A. LANGUAGE
F. AREA CODE
B. FIRST RING ON/OFF
G. FLASH TIME
C. TIME SET
H. PAUSE TIME
D. RINGER VOLUME
I. VOICE MAIL
E. LCD CONTRAST
J. MSG WAITING
To access, press the
/ VOICE MAIL
button and hold down while in STANDBY mode,
then press the TELEPHONE KEYPAD
DOWN
1. Place the HANDSET on the BASE UNIT for 12 hours .
2. After 12 hours ,remove the HANDSET from the BASE UNIT.
3. Raise or reposition the BASE UNIT ANTENNA for the best reception.
OPER
WXYZ
buttons or the SCROLL
button.
NOTE:
Depending on the frequency of use, once the HANDSET is fully charged , it remains
functional for approximately 4 hours of continuous use and approximately three days
when the HANDSET is off the BASE UNIT in STANDBY mode.
Receiving calls
AM
TORAL
KEYPAD
Button
TALK
AM
KEYPAD
TORAL
Button
ABC
AM
KEYPAD
AM
KEYPAD
GHI
KEYPAD
Button
AM
PQRS
TORAL
TORAL
Button
KEYPAD
KEYPAD
TORAL
Button
JKL
AM
Button
DEF
AM
AM
TORAL
TORAL
Button
TUV
KEYPAD
KEYPAD
Button
MNO
AM
WXYZ
TORAL
TORAL
1. When the phone rings, lift the HANDSET and
press the TALK button. The HANDSET LCD
Screen will display "CALLS" and "TALK",and
the BASE UNIT IN USE LED indicator will
light up.
2. Start your conversation
3. To end your conversation, either press the
TALK button or place the HANDSET on the
BASE UNIT. If you place the HANDSET on the
BASE UNIT CHARGE CRADLE, you activate
the automatic STANDBY feature.
CALLS
TALK
NOTES:
1. The Call Timer will start to count once you press the TALK button.
2. The LCD Screen emits light for 8 seconds every time you press any of the
TELEPHONE KEYPAD buttons.
When "CALLS"appears on the LCD Screen,
it means the HANDSET IS OFF-HOOK
(connected to the telephone line).
Button
CALLS
Minutes
AM
AM
TORAL
TORAL
Seconds or Channel (Press the scan/del
button to display the channel).
Call Timer Display
KEYPAD
OPER
19
Button
Cordless Telephone Operation
Caller ID System Operation
Deleting All Records in the PHONE BOOK
Placing Calls
1. Press the TALK button, the Call Timer
starts to count. The HANDSET LCD Screen
will display "CALLS " and "TALK ", and the
BASE UNIT IN USE LED indicator will light
up.
1. Press the DIR button to enter the phone book list. (If the phone book is not full, the
LCD screen will disply "NEWDATA", press scroll UP or DOWN to enter the phone
book list)
2. Press and hold down the
DEL
/SCAN , the LCD screen will display "ERASE ALL"
NEW CALL
MSG WAITING
LDCCF
2. Listen for a dial tone.
AM
PM
CALLS BATT MSG DIR
MIN
NEW
SEC RPT
TOTAL
AM
TOTAL
CALLER ID SYSTEM
3. Dial the phone number.
TALK
4. when you have finished your call, press the
TALK button again or place the HANDSET
on the BASE UNIT.
ABC
GHI
DEF
MNO
JKL
PQRS
WXYZ
TUV
DIR
EDIT
FUNC
VOICE MAIL
FLASH
Selective Deleting in the PHONE BOOK
1. Press the
OPER
NOTE: You can pre-Dial the phone number
before you press the TALK button. The number
displayed will be dialed once TALK is pressed.
3. Press DEL /SCAN again, the LCD Screen will display "ALL ERASED",and then
return to the idle display.
SAVE
RE/PA
DEL
SCAN
DIR
button.
2. Press the SCROLL UP
3. Press
DEL
or DOWN
button to find the record you want to delete.
/SCAN button, the LCD Screen will display the "ERASE ITEM"
TOTAL
4. The record will be deleted if you press
will display the next record.
5. Press the
DIR
DEL
/SCAN button again, and the LCD Screen
button to return to STANDBY mode.
18
Caller ID System Operation
Cordless Telephone Operation
Placing Calls from the PHONE BOOK
Using the Headset Feature
1. Press the
Your telephone can utilize a headset (not
included) to be connected to your HANDSET
for you to enjoy hands-free communication.
Insert the small plug at the end of the headset
into the HEADSET JACK at the right side of
the HANDSET. Follow the procedures
discussed in "Receiving Calls "and" Placing
Calls" to receive and place a call.
DIR
button.
2. Press the SCROLL UP
or DOWN
button to find the record you want to call.
3. Press the
/ VOICE MAIL button to change the format of the displayed number.
Available formats Include:
Number of digits
Eleven digits
Example
Explanation
Long distance code "1"
+3 - digit area cod
+7 - digit telephone number.
Ten digits
3-digit area code+
7-digit telephone number.
Seven digits
7-digit telephone number.
566-327-4466
1-566-327-4466
HEADSET
MICROPHONE
SPEAKER
NOTE: When you plug the headset plug into
the HEADSET JACK it automatically
mutes the MICROPHONE and
SPEAKER of the HANDSET. Unplug
the headset to return the HANDSET
to normal use.
HEADSET
PLUG(2.5mm)
327-4466
HEADSET JACK
Redial Feature
4. Press the
TALK
button to dial the number displayed in the screen.
5. To end your conversation, either press the
on the BASEUNIT.
TALK
button or place the HANDSET
NOTE: If the phone company does not supply all ten digits of an incoming caller, you
will not be allowed to adjust the format of that number.
1. If you get a busy tone, press the TALK button
or place the HANDSET on the BASE UNIT to
hang up.
2. Later, press the
TALK
TALK
button again.
3. Listen for a dial tone.
4. Press the SAVE RE/PA button, this will automatically
redial the last telephone number you called.
PQRS
WXYZ
OPER
5. When you have finished with your call, press
the TALK button again or place the
HANDSET on the BASE UNIT.
NOTE:
If you are too far away from the BASE UNIT, the HANDSET emits "beep"sounds to warn
you that the Background noise level is too high for proper communication between the
HANDSET and the BASE UNIT. When you hear this sound, you should move closer to
the BASE UNIT to reduce the noise level. Otherwise, the call will automatically cut off.
17
10
Caller ID System Operation
Caller ID System
This telephone automatically displays an incoming caller's name and telephone number
together with the date and time of the call. It records up to 80 calls and stores the data in
Memory.
IMPORTANT: You must subscribe to the Caller ID service from your local telephone
company to utilize this feature.
Caller ID System Operation
Editing the Name and Number in the PHONE BOOK
1. press the
button.
DIR
2. Press the SCROLL UP
or DOWN
button to find the record you want to edit.
Viewing Caller Information During Incoming Calls
1. When there is an incoming call, the name and the telephone number of the caller will
automatically appear after the first ring. Press the SHIFT RIGHT
button to view
a name of more than 11 digits.
3. Press the
Time
OR
Month/Date
AM
NEW
TOTAL
EDIT
/FLASH button to edit the name.
NEW
AM
Number of calls recorded
cursor is blinking
TOTAL
Caller's telephone number will appear if the caller's name is not available
4. Press the SHIFT LEFT
or RIGHT
button to move the cursor to the letter you
WXYZ
want to change. To add, use the TELEPHONE KEYPAD OPER
buttons.
(See page 26 for details.)To erase, press the DEL / SCAN button.
e.g
OR
"OUT OF AREA "will appear if the origin
of the incoming call does not support the
Caller ID system.
AM
TOTAL
5. Press the SCROLL UP
OR
"PRIVATE"and/or "P-- -- --"will appear if the caller's name and/or telephone
number is blocked.
OR
or DOWN
button to edit the number.
6. Press the SHIFT LEFT
or RIGHT
button to move the cursor to the number
WXYZ
you want to change. To add, use the TELEPHONE KEYPAD OPER
buttons. See page 24 for details.)To erase, press the DEL / SCAN button.
"DATA ERROR"will appear if the wrong data was received from the telephone line.
OR
The name stored in memory will appear for an incoming call with matching
telephone numbers.
"MSG WAITING" (Message Waiting)
The MSG WAITING GREEN LED indicator will blink when there is a message for
you from your telephone Company if you have subscribed to Voice Mail message
service and if you have requested Visual Message Indication from your local
telephone company. "MSG"will appear on the LCD Screen in STANDBY mode .(To
remove the MESSAGE WAITING indicator, see page 25 for detail)
TOTAL
7. Press and hold down the
SAVE
cursor is blinking
on the number
RE/PA button to confirm.
IMPORTANT: It is not advisable to save a telephone number without the corresponding
name in the PHONE BOOK.This will lead to improper displays on Private
and Out of Area calls.
NOTE: When no active buttons are pressed for 20 seconds, the LCD Screen will
automatically return to STANDBY mode.
11
16
Caller ID System Operation
Caller ID System Operation
Speed Viewing the PHONE BOOK
Call Waiting
1. Press the
When you subscribe to a Call Waiting service from your local telephone company, this
telephone will display the name and number of the second caller while you are having
a phone conversation with your first caller.
1. When you are having a conversation ,this tele- e.g.
phone will automatically display the name and
number of the second caller. The name will be
blinking.
2. Press the
/FLASH button to answer the
1st caller
second caller .The first caller's name.
and number will be displayed. The name will be e.g.
blinking.
3. When you have finished ,press the
/FLASH
button to continue with your conversation with
the first caller.
2nd caller
DIR
button.
2. Enter the first letter of a name. (See page 26 detail of entering a letter ).
3. Press the SCROLL UP
letter.
button to find all names with the same first
4. Press the SCROLL DOWN
button to find next name in the phone book.
Saving in the PHONE BOOK
1. Press the DIR button. The LCD screen will display "PHONE BOOK".(a record will be
displayed if the phone book is full, the phone book can story up to 64 records)
2. Press the
EDIT
/FLASH button to enter new record.
WXYZ
3. Use the TELEPHONE KEYPAD OPER
buttons to enter the name (see
page 26 for detail ), the cursor will a second, and you can store up to 16 characters.
4. Press the SCROLL DOWN
button once.
5. Enter the telephone number by using the TELEPHONE KEYPAD
buttons. You can store up to 16 digits.
6. Press and hold down the
NEW
AM
SAVE
OPER
WXYZ
AM
NEW
If you do not want to interrupt your phone conversation with the first caller, you can
advise the second caller to leave a Voice Mail message instead.
Voice Mail Function
When there is a Voice Mail message for you, the "MSG"icon on the LCD Screen and the
MESSAGE WAITING LED indicator will blink.
1.To access your Voice Mail message, press the TALK button.
2. After you hear a dial tone, press the
/VOICE MAIL button. This will automatically
dial the Voice Mail Post Code in your area and connect you to the Voice Mail service
provider.
RE/PA button.
7. Press the DIR button to return to STANDBY mode. (If no active button are pressed
for 20 seconds, the LCD Screen will automatically return to STANDBY mode.)
NOTE: You should store the Voice mail Post Code number by using the Voice Mail
function on page 23.You can also call your Voice Mail service provider by
dialing the Voice Mail Post Code number after pressing the TALK button,
NOTE: It will not save a duplicate telephone number or a name without the corresponding
telephone number in the PHONE BOOK.
"C-F"(Forwarded Call)
PREFERRED CALLS
"L-D-C" (Long Distance Call)
You can assign PREFERRED CALL which will generate a special ringer sound at the
start of the second Ring to any welcome caller in the PHONE BOOK. When you are
saving the name and number into the PHONE BOOK, add a mark at the beginning
of the name by pressing the TELEPHONE KEYPAD
button.
BLOCKED CALLS
You can assign a BLOCKED CALL which will disable the ringer sound from the second
ring to any caller in the PHONE BOOK. When you are saving the name and number
into the PHONE BOOK, add an mark at the beginning of the name by pressing the
TELEPHONE KEYPAD
button.
Appear on the upper left hand side, when the incoming call has been assigned to your
telephone number.
Appears on the upper left hand side, when the incoming call is a long distance call and
the service is provided by your local telephone company.
Caller List
Records call information for up to 80 incoming calls such as caller's name and
telephone number together with the date and time of the call .After recording a new
incoming call, the NEW CALL indicator will blink and the LCD Screen will look as
shown below:
No. of new calls.
Maximum calls=80
AM
NEW
15
TOTAL
12
Caller ID System Operation
Viewing the Caller List
1. Press the SCROLL DOWN
button to view the latest Caller ID record, or press
the SCROLL UP
button to view the first Caller ID record, press the SHIFT
RIGHT
button if the name has more than 11digits.
Caller ID System Operation
Deleting All Records in the Caller List
1. Press and hold down the DEL /SCAN button
while in the caller list, and display "ERASE ALL"
2. Press DEL /SCAN button again to delete all records,
the display "NO CALL"
AM
NEW
AM
NEW
2. Press the DIR button to go back to STANDBY mode. (If no active buttons are
pressed for 20 seconds or you have viewed the last Caller ID record in the Caller's
List, the LCD Screen will automatically return to STANDBY mode.)
2. Press
3. Press
button to select from the first Caller ID record, or
button to select from the first Caller ID record.
/VOICE MAIL button to select the correct format. (7 digits, 10digits, 11digits)
TALK
button to dial the number.
4.To end your conversation, either press the
the BASE UNIT.
TALK
NEW
TOTAL
3. Press DIR button to return to STANDBY mode. (If no active button are pressed for
20 seconds, the LCD screen will automatically return to STANDBY mode)
Selective Deleting in the Caller List
1. Press the SCROLL UP
or DOWN
button to
find the Caller ID record while in STANDBY mode.
Placing a Call from the Caller List
1. Press the SCROLL DOWN
press the SCROLL UP
AM
button or place the HANDSET on
2. Press DEL /SCAN button, the LCD Screen will
display "ERASE ITEM".
AM
3. Press the DEL /SCAN again, the LCD Screen will
display the next Caller ID record in the Caller List.
4. Press the
DIR
button to return to STANDBY mode.
PHONE BOOK
Saving the Name and Number in the Caller List into the
PHONE BOOK
This DIRECTORY lets you scroll through the list to find the record you need for one
touch dialing .You can Store up to 64 names and telephone numbers in the Memory.
1. Press the SCROLL UP
2. Press and hold down the
Viewing the PHONE BOOK
or DOWN
button to find the caller.
RE/PA button.
SAVE
1. Press the
DIR
button
NOTE: It is not advisable to save a telephone number without the corresponding name.
This will lead To improper display on Private and Out of Area calls.
TOTAL
AM
No. of records stored
2. Press the SCROLL
the SHIFT RIGHT
AM
UP or DOWN
button to find the one you need, press
button if the name or telephone number is more than 11digits.
AM
NEW
NEW
NOTE: To exit the PHONE BOOK List at anytime, press the
13
14
DIR
button.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2002:11:26 16:16:37-08:00
Create Date                     : 2002:11:26 16:10:25-08:00
Title                           : 6304
Author                          : JWM
Creator                         : CorelDRAW Version 9.397
Producer                        : Corel PDF Engine Version 9.397
Page Count                      : 20
Mod Date                        : 2002:11:26 16:16:37-08:00
Creation Date                   : 2002:11:26 16:10:25-08:00
Metadata Date                   : 2002:11:26 16:16:37-08:00

EXIF Metadata provided by EXIF.tools