Nex Computer NDK1614 14.1 inch notebook User Manual 1

Download:
Mirror Download [FCC.gov]
Document ID	3066791
Application ID	akgVf86m0AO7xaKJz0etdg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	19kB (237559 bits)
Date Submitted	2016-07-18 00:00:00
Date Available	2016-07-18 00:00:00
Creation Date	2016-06-13 17:20:45
Producing Software	Corel PDF Engine Version 16.1.0.843
Document Lastmod	2016-06-13 17:20:45
Document Title	未命名 -1
Document Creator	CorelDRAW X6
Document Author:	Administrator

NexDock Quick User Guide
1. Connect your device to
mini-HDMI port on NexDock
2. Press and hold power
button on NexDock
3. Connect Bluetooth
Keyboard and Touchpad
Use the mini-HDMI to
HDMI cable to connect
your device to NexDock
and turn your device
ON.
IMPORTANT: If HDMI
connection is not
detected, NexDock
will power off
automatically after 5
seconds.
“Caps Lock” led will
start blinking when
NexDock is in pairing
mode.
If you want to power
your mini PC from
NexDock, connect
micro-USB to USB
cable to NexDock and
press mini PC’s power
button.
When using NexDock
with your device, if you
disconnect mini-HDMI
cable NexDock would
automatically turn off.
Turn on bluetooth
connection on your
device and search for
“NexDock Keyboard”.
Follow pairing
instructions on your
device to connect;
pairing code is not
required.
Troubleshooting
Bluetooth Connection
In case you cannot connect to
“NexDock Keyboard” delete it
from paired connections on
your device and try again.
NexDock will always try to
connect the last paired
device so if you are using
NexDock with multiple
devices make sure the
bluetooth connection is
turned off on the device that
you are NOT using and try
again.
You can also disconnect
paired connection pressing
and holding Function+Q on
the keyboard.
Display Resolution
NexDock resolution is
1366x768 and some of the
USB Type-C to HDMI
adapters do not support
higher than 720P resolution.
NexDock and Lumia 950
smartphone have been tested
with USB Type-C to HDMI
adapters from Dell, HP &
Google and we recommend to
use one these adapters.
Some operating systems
such as Remix OS also do not
support this resolution and to
conrm there are no issues
with NexDock we recommend
to test it with Windows 10 OS.
Low Battery & Power
When battery is low power led
starts blinking in orange.
Battery level is recognized
only when NexDock is
connected to a device via
bluetooth so if you do not
have any device connected
via bluetooth you might
experience ickering of
display due to low battery.
IMPORTANT: In case
NexDock does not turn off
for any reason you can
force shutdown by
pressing and holding
power button for 10-15
seconds.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment .
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2016:06:13 09:20:45Z
Modify Date                     : 2016:06:13 09:20:45Z
Creator Tool                    : CorelDRAW X6
Metadata Date                   : 2016:06:13 09:20:45Z
Format                          : application/pdf
Title                           : 未命名 -1
Creator                         : Administrator
Producer                        : Corel PDF Engine Version 16.1.0.843
Part                            : 1
Conformance                     : B
Page Count                      : 3
Author                          : Administrator

EXIF Metadata provided by EXIF.tools