Contents
- 1. user manual 1
- 2. user manual 2
user manual 1
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1274747 |
| Application ID | 1mjb/YMlaI8y+SkcdChAHw== |
| Document Description | user manual 1 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 228.5kB (2856213 bits) |
| Date Submitted | 2010-04-29 00:00:00 |
| Date Available | 2010-10-16 00:00:00 |
| Creation Date | 2010-04-09 19:53:59 |
| Document Lastmod | 2010-04-28 15:34:54 |
| Document Title | user manual 1 |
USB Copyright The content of this publication may not be reproduced in any part or as a whole, stored, transcribed in an information retrieval system, translated into any language, or transmitted in any form or by any means, mechanical, magnetic, electronic, optical, photocopying, manual, or otherwise, without prior written permission. Trademarks All products, company, brand names are trademarks or registered trademarks of their respective companies. FCC Interference Statement FCC ID: YAZ-NEX09 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IC: 7839B-NEX09 Complies with Canada RSS-210 CE Declaration of Conformity This equipment complies with the requirements relating to electromagnetic compatibility, EN 55022/A1 Class B. Conformity Warning They are used for identification purposes only. Specifications are subject to be changed without prior notice. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the installation. , May cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna -Increase the separation between the equipment and receiver -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected -Consult the dealer or an experienced radio / TV technician for help You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. You are cautioned that changes or modifications not expressly approved by the party responsible or compliance could void your authority to operate the equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Industry Canada - Class B This digital apparatus does not exceed the Class B limits for radio noise emission for digital apparatus as set out in the interference-causing equipment standard entitled "Digital Apparatus," ICES-003 of industry Canada. FCC RF radiation exposure statement:his transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This Class B digital apparatus complies with Canada RSS-210.Cet appareil num?rique de la classe B est conforme a' la norme CNR-210 du CanadaThis equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Table of Contents Introduction.......................................................................................................................................................1 Features..........................................................................................................................................1 Package Contents..........................................................................................................................2 System Requirements....................................................................................................................2 Wi-Fi Requirements......................................................................................................................2 Hardware Overview..........................................................................................................................................3 Default Router Settings......................................................................................................................................4 Hardware Setup................................................................................................................................................5 Wi-Fi Connection..........................................................................................................................6 Initial 3G/4G Wireless Setup.............................................................................................................................7 /Wireless Setup.............................................................................................................................7 Installation and Configuration Settings.........................................................................................7 NexWare Setup Wizard......................................................................................................................................7 Basic Settings.....................................................................................................................................................9 Admin Password............................................................................................................................9 Wi-Fi..............................................................................................................................................9 Wired Interfaces..........................................................................................................................10 Cellular Datacard.........................................................................................................................11 Realtime Network Traffic.............................................................................................................11 Logout..........................................................................................................................................11 Tool Box............................................................................................................................................................12 System Settings...........................................................................................................................12 Email Notifications......................................................................................................................12 System Log..................................................................................................................................13 Flash Firmware............................................................................................................................13 Backup Interface..........................................................................................................................13 Reset to Defaults..........................................................................................................................13 Reboot..........................................................................................................................................13 Advanced Settings...........................................................................................................................................14 DHCP Server...............................................................................................................................14 SNMP (Simple Network Management Protocol)........................................................................14 Dynamic DNS.............................................................................................................................15 QoS (Quality of Service)..............................................................................................................16 Security Settings..............................................................................................................................................17 Remote Admin.............................................................................................................................17 IPsec.............................................................................................................................................17 SSH Server..................................................................................................................................18 SSH Keys....................................................................................................................................18 Routing Settings..............................................................................................................................................18 Routes.........................................................................................................................................18 RIP..............................................................................................................................................19 DMZ Host..................................................................................................................................19 VRRP..........................................................................................................................................20 Internet Failover.........................................................................................................................21 Port Forwarding..........................................................................................................................21 UPnP...........................................................................................................................................22 Troubleshooting....................................................................................................................................................23 Technical Support................................................................................................................................................26 Technical Specifications......... Glossary of Definitions........... 27 dBm Package Contents Important: Check the contents of the box first. The Business Class II High Availability Router package should contain the items listed below. If any of the items are missing, please contact your reseller. (1) Business Class II High Availability Router (1) CD-ROM (1) RJ-45 Ethernet Cable (1) Switching 12V 1.25A Power Adapter Caution: Using a power supply with a different voltage rating other than the one included with the Business Class II High Availability Router will cause damage and void the warranty for this product. System Requirements • Compatible with ExpressCard or USB 3G/4G modem card with activated service. * NOTE: Subject to terms available from your carrier. • Computer with Windows XP, Vista, Windows 7, Macintosh, or Linux-based operating system with an integrated Ethernet adapter or Wireless Wi-Fi 802.11 G interface. • Internet Explorer, Firefox, Safari, and Google Chrome (for accessing web-based configuration settings). Wi-Fi Requirements • IEEE 802.11 b/g/n adapter. *ExpressCards, and USB modems need to be activated through your cellular service provider prior to insertion into the Business Class II High Availability Router. Hardware Overview LEDs (Front View) LAN LED: Lights up blue when a local Ethernet cable is connected and blinks to indicate activity. USB USB 3G LED: LED: Solid blue when connected. Power indicated by consistant blink. Wi-Fi LED: Light blinks blue when a connection to the Wi-Fi is available. WAN LED: Lights up blue when WAN is connected. Receptors and Ports (Rear View) USB Port: Allows connection with a 3G/4G USB modem. WAN/LAN Ports: Automatically senses WAN and LAN types when connecting to Ethernet. WAN can be converted to an additional LAN port. Reset Button: Resets the Router to factory default settings. Power Receptor: Compatible with included 12V 1.25A adapter. ExpressCard and Serial Console Port (Side View) Serial Console Port ExpressCard Port: Allows connection with an ExpressCard modem. Default Router Settings Login Screen Wi-Fi Interface Wired Interfaces Cellular Datacard System Settings Email Notifications DHCP Dynamic DNS Port Forwarding Quality of Service (QoS) Routes SNMP Remote Admin IPsec SSH Server VRRP Internet Failover UPnP Username / Password Devices Channel ESSID Security Key IPv4 Address / Netmask DNS Server 3G Service Hostname Timezone Server First leased address Number of leased Lease time Static Leases Static IPv4 Port root /admin enabled Auto select NEXWARE### (### are the last 3 digits of the Router’s MAC Address WPA-PSK / WPA2-PSK password 192.168.1.1 / 255.255.255.0 208.67.222.222 / 208.67.220.220 Auto detect NexWare UTC disabled enabled 100 151 12h none disabled none enabled none disabled disabled 8080 disabled disabled disabled disabled disabled Hardware Setup The Business Class II High Availability Router allows you to access your network using a wireless connection from virtually anywhere within its operating range. Please note that location placement of the router could affect the wireless signal and range limits. Typical ranges also vary depending on the types of materials and background RF (Radio Frequency) noise present in your networking environment. To maximize your wireless range, please follow these guidelines: 1. Choose the right location in your environment for the 3G/4G Wireless Broadband Router. The WLAN transmitters are radios, and degrade as they go through walls, floors, and obstacles like tubs full of water (almost impenetrable), stone, or concrete. So for best reception, place your router centrally to the rooms in which you expect to use WLAN the most. Each wall or ceiling can reduce the Business Class II II High Availability Router’s range by as much as 90 feet (27 meters). NOTE: The same considerations apply to your carrier’s 3G/4G broadband carrier’s connection. 2. Keep your product away from electrical devices (such as microwaves, air conditioners, cordless phones, refrigerators and televisions) that emit large quantities of RFI (Radio Frequency Interference). in-NOTE: DO NOT connect the Business Class II High Availability Router to power before following the in stallation steps below! Business Class II High Availability Router Setup 1. ExpressCard or USB connection: a. Insert an activated ExpressCard into the card slot. b. Alternatively, insert an activated USB modem into the USB slot. a. b. 2(ii). Ethernet connection: a. Insert one end of an Ethernet cable into the LAN Port on the back panel of the router. Insert the other end into an available Ethernet port of the network adapter in the computer that will be used to configure the unit. b. LAN LED should be on when connected. If not, check the connection between the router and computer. NOTE: The Business Class II High Availability Router LAN Port is “Auto-MDI/MDIX”, so any standard Ethernet cable will work. 3. Power connection. a. Connect the power adapter to the receptor on the back panel of the router. Plug the other end of the power adapter into a wall outlet or power strip. b. The 3G & Wi-Fi LED will turn ON and flash, indicating that the unit is powered on. Also performing the boot-up cycle. The LAN and WAN lights will be on if connected. c. The 3G/4G LED will flash and stabilize once a 3G/4G connection is established. d. Upon completion of the boot-up cycle, the 3G light, LAN and Wi-Fi lights will be on. Occational flashing may occur indicating normal activity. NOTES: An uninterruptable power supply (UPS) is recommended for power surges and/or outages. At a minimum, a surge protector should always be used to protect the equipment from being damaged by electrical spikes and transients. Wi-Fi Connection If you are connecting wirelessly to the Business Class II High Availability Router, you must ensure that the security settings on the connecting PC are the same as those on the router. By default, the router broadcasts a secure Wi-Fi signal with WPA-PSK* encryption: • SSID / Wi-Fi Signal Name is set to NEXWARE### (where ### equal the last three characters of the router’s MAC address) • Channel is set to channel 5(2.4GHz) • Security is set to WPA-PSK* • Key (password) is set to password NOTE: It is recommended, for security reasons, that the security settings on the router be changed during initial setup. *Please refer to your computer’s Wi-Fi adapter documentation for additional information. Initial 3G/4G Wireless Setup Connecting to the Router Main Page for Installation and Configurations Settings Follow the steps below to access the Router and perform installation and configure settings: 1) Open a web browser on your computer connected to the router’s LAN port by and Ethernet cable. 2) Enter the IP address of the Router in the URL line of your web browser. http://192.168.1.1 NOTE: If you have changed the router’s default IP address, enter that address instead of the one above. 3) Type “admin” in the Password field. If you have changed the password, enter the new one in this field. NOTE: Default Username is “root”. 4) Click the “Login” button. 5) You will be greeted by the iconic home page. Setup Wizard Select the Setup Wizard Icon. Select the Next button to proceed with the indicated steps of the automated setup process. 1) Change your administration password. It is recommended that the default password (admin) be replaced for security reasons. Enter your new password and then re-enter to confirm. Select Next to retain any changes and move to the next step. 2) Configure your Wired Internet connection. a. During the boot up process of the router if your wide area network (WAN) Ethernet cable is plugged into the WAN port of the router, the router will automatically be connected to your ISP. b. If your ISP requires you to setup the WAN as a PPPoE or PPTP, you will need to enter your ISP’s required information into the proper fields. i. PPPoE. Typical entries include the Username and Password ii. PPTP. Typical entries include the Username, Password, and the PPTPServer Name. 3a) Configure your wireless settings. This step allows you to change whether the Wi-Fi is enabled, the channel on which the Wi-Fi is broadcast on, the wireless mode (b,g,n or mixed), the name that is broadcast, the security and encryption type, and the key (password) to access the broadcasted Wi-Fi signal. • Disable only if you do not want anyone accessing the router wirelessly. • Change channel if other wireless devices are interfering with the router. By default the router will auto-select the channel. • Select the wireless mode, choose from b,g,n or a mix. • The router’s mode is factory set to provide (Access Point) • Change the Network Name (ESSID) to whatever name you wish to be broadcasted • Hiding the ESSID does not disable the WiFi signal and should not be thought of as security setting. Hiding the ESSID only eliminates the name from being broadcasted. • Change encryption type as necessary. Some wireless devices cannot connect to all encryption modes. The default setting is WPA-PSK. Other typical choices include WEP (ASCII or Hex), WPA=PSK, or WPA2-PSK. Additional available settings require additional software or hardware not included with this router. • Change Key (password). We suggest that this setting be changed. This setting controls the require Key or password to access your wireless signal. • Choose to filter by MAC Address. 3b) 3G/4G Internet Connection Setup. a. During the boot up process of the router all compatible data cards are recognized and are setup automatically. No additional information is typically required to complete the setup of your compatible 3G/4G data card. b. If your ISP requires additional information to connect to their network, please refer to their documentation for APN, PIN Code, Username, and Password. All data entry fields may not be required to connect to your ISP’s network. c. Avalible options and selections are dependant on the presence of a datacard and the carrier network type. 4) Select Next to retain any changes and move to the Completion page and select Finish. Basics Admin Password You can change the router’s administrative password. (default = admin) Wi-Fi Settings Here you can change whether the Wi-Fi is enabled, the channel on which the Wi-Fi is broadcast on, the name that is broadcast, the wireless mode, the encryption type, the key (password) to access the broadcasted Wi-Fi signal, and enable Wireless Distribution System (WDS). • Disable only if you do not want anyone accessing the router wirelessly. • Change channel if other wireless devices are interfering with the router. • Change the router’s Wireless Mode. Choose from six settings, b, g, or n and mixes. • Routing mode is factory set to Provide (Access Point). • Choose to hide the ESSID. • Change the Network Name (ESSID) to whatever name you wish to be broadcasted. • Change security and encryption type as necessary. Some wireless devices cannot connect to all security modes. • Change Key (password). We suggest that this setting be changed. • Choose to enable MAC Address filtering, then select filter policy and create the address list. NOTE: After any changes, select ”Save” to retain. System will refresh following, “Save”. WDS: Wireless Distribution System (WDS) is a feature that allows multiple access points of the same physical radio type to be bridged together as one common WiFi network. Because the same physical radio type must be used, this feature only operates with other Nexaira routers. The following configuration options are available: • BSSID: Your router supports up to four WDS clients. Enter the BSSID (MAC address listed on the bottom label of the router, also listed under LAN on the Wired Interfaces page) of the other devices to be connected to via WDS. Wired Interfaces Here you can review WAN, and LAN status as well as change Local Network, and WAN Ethernet settings. • The IP address is the address of the router. It is also your local network’s gateway address which is used by all LAN hosts to access the Internet through the WAN connection. • The Netmask is used to determine the number of subnetworks that can be connected to the router. • The IP Gateway (optional) field is and advanced an optional setting that is available if your local network has a gateway that is different than the router’s LAN IP address. • DNS Server (optional) allows you to specify a DNS server for LAN hosts to use if your WAN connection does not supply a valid server address, or if not-peer DNS Server information is required or chosen under Cellular Datacard settings. • Change WAN port into a second LAN port. • Enable IP Passthrough mode to have one client have the WAN IP. All router functions are disabled. • Enable or disable the router’s ability to connect to the internet through a WAN Ethernet connection. NOTE: After any changes, select ”Save” to retain. System will refresh following, “Save”. Cellular Datacard • Enable or disable the router’s ability to access the Internet through a datacard • Select Service type: UMTS/GPRS, CDMA (default), or EV-DO. • Insert Access Point (APN), PIN code, Username, and Password as indicated by your 3G/4G wire less provider. • Select to use the Peer DNS or an optional location. Input DNS Server information in Wired Interfaces. • Enable Keep-Alive to determine it the connection is up. Router well re-initilize connection if connection is down. • Input time (in seconds) of inactivity until link is disconnected. NOTE: Settings are auto-populated when an activated compatible datacard is inserted. Realtime Network Traffic The Network Traffic status screen shows current traffic status of active interfaces, such as the LAN, the connected Datacard, and the WAN. Logout Here you will be logged out of administrative mode. You will be returned to the login screen.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf Linearized : No Modify Date : 2010:04:28 15:34:54+08:00 Create Date : 2010:04:09 19:53:59+08:00 About : uuid:0eb32bce-6d7b-496b-9a0c-e1030eaa3e48 Mod Date : 2010:04:28 15:34:54+08:00 Creation Date : 2010:04:09 19:53:59+08:00 Metadata Date : 2010:04:28 15:34:54+08:00 Document ID : uuid:6f6336d8-8c5d-404b-8976-fe4e1636218c Format : application/pdf PDF Version : 1.6 Page Count : 15 Has XFA : NoEXIF Metadata provided by EXIF.tools