Nexpro Limitada E750 GSM Mobile Phone User Manual 2

Nexpro International Limitada GSM Mobile Phone 2

UserManual.wiki >

Nexpro Limitada >

E750 User Manual HTML Version

Users Manual

Contents

1. For your

Safety………………………….4

2. Mobile Phone

Profile…………………8

3. Preparation before

Use……………..10

Install SIM Card.................10

Install Memory card.........12

Install Battery.....................13

Charge Battery.................14

Notices on using the

battery...............................16

PIN code............................17

4. Use of Menu

Functions……………19

Phonebook……………………

………..19

Call

center…………………………

……22

Multimedia……………………

………..29

Face

book……………………………

….38

CSL Fun

club……………………………3

Twitter…………………………

…………39

Messaging……………………

…………39

Opera

Mini……………………………..

Chatting………………………

………….47

Blueberry

Apps……………………….48

Services……………………….

………….48

Organizer…………………….

………….51

Google……………………….

…………..58

Settings…………………………

………..59

5. Use of

USB……………………………….69

6. Maintenance &

Safety……………..69

After sales service ............70

Charger and Adapter

Safety.................................70

Battery Information and

Care...................................70

General Notice.................71

Troubleshooting................72

Abbreviations……………………

…….76

1. For your Safety

For your safety and proper use of

the mobile phone, please read the

following guidelines carefully: Do not

switch the mobile phone on when close

to chemical factory, gas station or other

explosive objects.

z During driving, please use headset for

safety purpose; unless otherwise in

emergency, always stop the car on

roadside to have a call conversation.

z Because the use of the mobile phone

can cause interference in the aircraft,

never use the mobile phone in aircraft.

The use of the mobile phone is

dangerous and illegal; do switch off

the mobile phone before boarding.

z Pay special attention to the use of the

mobile phone near heart pacemaker,

deaf-aid and some other medical

equipments, because the mobile

phone can cause interference with

them.

z None-original factory’s accessories

and parts will lose guarantee.

z Do not dismantle the mobile phone

without permission. In case of failure,

please contract the supplier as soon

as possible.

z Do not plug the charger into the

mobile phone and charge without

battery. Always power off the mobile

phone when taking out the battery;

otherwise the memory of the phone

may be damaged.

z When charging the mobile phone,

always keep it in the place with good

ventilation, heat sink and away from

flammable and explosive objects.

z In order to avoid demagnetization,

always keep the mobile phone away

from magnetic objects such as CD,

credit card etc.

z Ensure the mobile phone not to

contact any liquid; once such case

occurs, remove the battery and

contact the supplier immediately.

z Do not use the mobile phone in the

environment at too high or too low

temperature, never expose the

mobile phone under strong sunshine

or too wet environment. The suitable

temperature for the phone and

accessories is 0℃-40℃. The height to

use the phone shall be less than

2,000m.

z Do not use liquid or wet cloth with

strong cleanser to clean the mobile

phone.

z This mobile phone has shooting,

videoing and audio recording

functions, which shall be used as per

the related laws and regulations.

z Always keep the mobile phone out of

children’s reach. Do not throw or

vibrate the mobile phone because

violent treatment to the mobile

phone may damage the inner circuits

and precise structures.

z Please do not discard the waste

battery into general household

garbage. Please deal with the waste

battery according to provisions where

they are definitely made.

Tip: This user manual is based on simplified

Chinese operation mode; so it may vary

in English operation mode.

Warning: We will not be bear

any responsibility for any

incompliance with the above

guidelines or improper use of

the mobile phone. Our

company keeps the right to

make modifications to any of

the content here in this user

guide without public

announcement in advance.

The content of this manual may

vary from the actual content

displayed in the mobile phone.

In such case, the latter shall

govern.2. Mobile Phone Profile

This phone is the finger sense function,

you’re your finger slide on the optical

finger navigation you can choose the

related function. Below is the front of the

mobile phone.

Receiver

Keypad

LCD screen

Facebook /

Optical

End key

MSN/OK

Retreat key

Send

key

Camera

Send

key

Speaker

3. Preparation before

Use

Install SIM Card

When registering mobile phone

number, you can apply for two different

phone numbers, two different mobile

phone network service providers and thus

obtain two SIM (Subscriber Identification

Module) cards.

With these two SIM cards, you can

use all functions of your mobile phone.

The SIM cards save the parameters

needed for communications and

personal data, including PIN (Personal

Identification Number) code, phonebook,

short message and other extra system

services.

Warning: Do not distort or scratch the SIM

card nor let it contact static, dust or

moisture. If it is lost, please contact

immediately your network operator for

help.

Before SIM card installation, please

switch off the mobile phone. The SIM card

is installed on the back of the mobile

phone.

Follow the following diagram to install

the SIM card. Please insert the host SIM

card into the SIM1 slot and the slave SIM

card into the SIM2 slot.

Note: If SIM card is inserted only into

the SIM1 slot, then only the host works;

likely, If SIM card is inserted only into the

SIM2 slot, then only the slave works. When

two SIM cards are inserted into the SIM1

slot and SIM2 slot respectively, you can

choose work mode freely as you wish.

Note: As the SIM card is small object,

keep it out of children’s touch or prevent

children gulping it!

Install Memory card

As the mobile phone does not have

enough storage space, to use some

functions, you need to install a memory

card (This mobile phone use T-FLASH

card.)

Install T-FLASH card: Open the back

cover to take out the battery, release the

T-Flash card lock, insert the T-Flash card

into its slot, and restore the lock and the

SIM1

SIM2

battery before restarting the mobile

phone.

Note: As the T-FLASH card is small object,

keep it out of children’s touch or prevent

children gulping it!

Install Battery

The mobile phone is suitable for

original battery and accessories. When

the battery is idle, it is recommended to

put it into the protection box.

Follow the following diagram to

install the battery.

Memory Card

Note: Do install the battery as per the

diagram so as prevent the battery

contact patch being damaged.

Charge Battery

The new battery cannot reach the

optimal efficiency unless it has

undergone several continuous complete

charges and discharges.

When the battery is used up, charge

it in time. Over-discharge can damage

the battery.

Battery

After the battery is charged full, cut

off the connection of charger with the

AC power supply and the connection

with the mobile phone.

Follow the following diagram to

connect the charger.

During charging, the battery

capacity icon on the screen flickers from

the right to the left. After the battery is

charged full, the icon is full of bars. Slight

heat during charging is normal.

Warning: When a travel charger and its

accessories are used to charge the

battery, please firstly check if they are

original or recognized by the original

manufacturer. The use of other

accessories may damage your mobile

phone and cause risks! Always use them

indoor and dry places.

Earphone / Charger Port

Notices on using the battery

The performance of the battery is

affected by many factors, including radio

barrier network settings, signal strength,

signal strength, work temperature,

chosen and used functions or settings as

well as phone accessories, tone, data or

other applications.

For optimal performances, please

follow the rules below:

z New battery or the battery having

been idle for long need charging for

long. The standard voltage scope for

the battery is 3.6V-4.2V.

z During charging, keep the battery at

room temperature or similar

temperature.

z With time passing by, the battery will

gradually be worn and thus need

longer time to charge. This is normal.

However, after normal charging, if

call duration decreases but charging

time increases, you need to buy

another battery from the original

manufacturer or authorized by the

original manufacturer. The battery of

interior quality can damage your

mobile phone and cause danger!

z If the phone is overused at low

battery when charging, there might

need a longer time for the charge

indicator to be shown on the screen.

Note: Please dispose the battery

according to the local regulations. Try to

recycle the battery as possible. Do not

treat the waste battery as common

waste.

Warning: Do not throw the battery into

fire so as to prevent fire. The broken

battery may cause explosion.

Warning

Charging the mobile phone by

improper means can cause to

explosion. Always refer to the

related regulations for the disposal

of the battery.

PIN code

PIN1 Code: It is the personal

identification number used to enter SIM

and able to prevent others using SIM1

without permission. If the mobile phone

has activated the PIN1 code protection,

when the mobile phone is switched on,

the screen will display “Input PIN”. In the

process of inputting PIN1 code, the

screen will use “*” to represent the input

content. While obtaining SIM, you can

obtain its PIN1 code.

PIN2 Code: It is the personal

identification number used for some

special functions such as paid call etc.

PUK Code and PUK2 Code(8-digit)

To change the locked PIN code, you

need to use PUK (Personal Unblocking

Key) code. To change the locked PIN2

code, you need to use PUK2 code. If

these two codes are not provided

together with the SIM cards, ask the local

service provider for them.

Warning: If the PIN code is input wrongly

for successively three times, the SIM card

will be locked. Please contact the

network operator immediately for help.

Attempt to unlock the code may make

the SIM card ineffective forever!

4. Use of Menu

Functions

Phonebook

The mobile phone is provided with

the business card folder type phonebook.

The information of every contact saved

on the mobile phone include three

phone numbers (mobile phone, home

phone and company phone), company

name, e-mail, fax, birthday, big-head

sticker, tone. Every contact saved into

SIM1 and SIM2 can only include name

and number. The mobile phone supports

1000 groups of numbers.

View

You can browse the details of the

contract.

Send message

Input the message, and you can sent

to the contract.

Call

You can make a phone call of the

contract by pressing this option

Edit

You can edit the name and the

number of the contract.

Delete

You can have four modes regarding

deletion: from SIM1,from SIM2, from

phone and one by one.

Copy

You can copy all contacts from SIM1

to phone, from phone to SIM1, from SIM2

to phone, from phone to SIM2, from SIM1

to SIM2 and from SIM2 to SIM1.

Move

You can move the contract from

the phone to SIM Card or to SIM card 2

Send contract

You can send the contract as the

phone guides, as text message, as

multimedia message, as email and via

Bluetooth.

Add to Blacklist

You can add the contract into

blacklist.

Caller Groups

You can set call tone, photo and

members for five callers’ groups. Callers’

group member can only come from the

number saved on phone.

Phonebook Settings

z Preferred Storage: You can choose

the storage path for the current

number.

z Memory Status: You can view the

current use status of the phonebook,

including SIM1, SIM2 and phone

memory. The display format is

“Used/Total”.

z Fields: You can choose the display

items in the phonebook and the

display items in the Add Contact

interface.

z My vCard: You can edit and send my

business card.

z Vcard version:Including vcard 2.1 and

vcard 3.0

Call center

In dual-SIM mode, you can

separately search the call register of SIM1

and SIM2 and set separately some

operations corresponding to SIM1 and

SIM2. In mono-SIM standby mode, you

can set the available SIM card and see its

call register.

Call history includes missed calls,

dialed calls and received calls.

In missed calls, received calls and

dialed calls function list, you can see the

date and time of the call, edit or delete

the phone number in the list, save the

number to phonebook or send SMS and

MMS to the number, etc.

Note: SIM1 and SIM2 contain

respectively 20 entries. Choose any entry

from missed calls, received calls and

dialed calls, press the Send key to dial the

number directly.

Call history

Delete call logs

z Missed calls: With this function, you

can delete the records of the missed

calls.

z Dialed calls: With this function, you

can delete the records of the dialed

calls.

z Received calls: With this function, you

can delete the records of the

received calls.

z Delete all: With this function, you can

clear all duration records of calls.

Note: The actual call duration and

service time in the bill of the service

provider may be different from them,

which depends on the network functions,

accounting rounding and tax etc.

Call timers

This needs the support of the network

service provider.

z Last Call: With this function, you can

view the duration of the last call.

z Dialed calls: With this function, you

can view the duration of the Dialed

calls.

z Received calls: With this function, you

can view the duration of the received

calls.

z Reset all: With this function, you can

reset all the records of the calls.

Call Cost

This needs the support of the network

service provider.

z Last Call Cost: With this function, you

can view the fees of the last call.

z Total Cost: With this function, you can

view the fees of all calls.

z Reset Cost: With this function, you can

clear all fee records.

z Max Cost: With this function, you can

limit call fees in the specified pricing

unit or currency unit. PIN2 code must

be input to set call cost.

z Price Per Unit: This function needs

network support. For more details,

please consult the network operator.

SIM text message Counter

With this function, you can see and

preset the number of sent messages and

received messages.

GPRS Counter

z Last Sent: You can view the sending

traffic of last link.

z Last Received: You can view the

reception traffic of last link.

z All Sent: You can view the sending

traffic of all links.

z All Received: You can view the

reception traffic of all links.

z Reset Counter: You can clear all link

traffic.

Call settings

[SIM Card settings]

Caller ID: Including set by Network, hides

ID and send ID.

 Set by Network: While having a

call conversation, you can

send my caller ID in the form

preset by the system.

 Hide ID: While having a call

conversation, you will not send

my caller ID. If the system does

not support such function, call

may fail.

 Send ID: While having a call

conversation, you can send

my caller ID to the system.

Note: This function needs network

support.

Call Waiting: You can set this function On

or Off. The call hold and multi-party call

cannot be active unless this function is

activated. This needs network support.

Call Divert: This is a kind of network

function, which cannot be used unless

you apply to the network operator for it.

With this function, you can divert calls

meeting he conditions to another

number.

Name Description

Divert All

Voice Calls

The network will

divert all voice calls

without conditions.

Divert if

Unreachable

When the network

cannot find your

mobile phone

(switched-off or out

of the service area),

it will divert the calls.

Divert if no

Answer

When the mobile

phone does not

answer the call, the

network will

automatically divert

it.

Divert if Busy When you are on

line, the network will

divert the call.

Divert All

Data Calls Network support

needed.

Cancel All

Diverts Cancel all divert

functions.

Call Barring

 Outgoing Calls:

1. All Calls: You can bar all

outgoing calls.

2. International Calls: You

can bar international calls.

3. International Calls Except

To Home PLMN: When

abroad, you can dial the

calls of the current country

and the original country

(the service providers

allows to do so).

¾ Incoming Calls:

1. All Calls: You can bar all

incoming calls.

2. When Roaming: You can

bar all calls except the

calls of the local service

area.

 Cancel All: You can cancel

call barring settings and

dial/receive calls normally.

 Change Barring Password: You

can apply to the network to

change the password for call

barring.

Line Switching: You can choose Line 1 or

Line 2.

[Advance settings]

Blacklist: You can set the blacklist as the

phone guides.

Auto Redial: You can set it as On or Off.

After the first automatic redial fails, you

can have at most ten times to connect a

phone number.

Background sound: Set the background

sound here.

Call time Display: You can set whether to

display call duration during call

conversation.

Call Time Reminder: You can set one alert

tone or periodic alert tone for several

round minutes during call conversation so

that you can understand call time. You

can turn off the alert tone.

Auto quick end: You can set call duration.

After the set time expires, the mobile

phone will automatically end the call.

Reject by SMS: You can have this function

as choose it On/Off.

Note: Some settings need network

support. For example, call barring cannot

be used unless the local network and SIM

card open it.

Multimedia

Image viewer

All photos taken are saved in the album.

Options Description

View You can view the selected photos.

Edit You can edit the pictures as the

phone guides.

Browse Style There are two browse styles, i.e. list

and matrix.

Use as

You can send photo to

wallpaper ,Screen saver, power on

display, power off display, call

picture.

Send As multimedia message; as email; via

Bluetooth.

Rename You can rename the selected photo.

Delete You can delete the selected photo.

Delete All

files You can delete all photos in the

album.

Sort by For convenience of search, you can

rank them as per name, type, time

and size or choose “None”.

Storage You can choose photos storage path

(to phone or memory card).

Video recorder

Press the key at the bottom to start

video recording. The duration of recording

depends on the time limit set and file

management capacity. Entering the

options, you can have the following

settings:

Options Description

camcorder

Settings

You can set White Balance, EV,

Night Mode and Banding for your

recorder so as to have high-quality

videos.

Video Settings You can set Cartoon Quality.

Balance

settings

Auto, Daylight, Tungsten,

Fluorescent, Cloud,

Incandescence.

Effect Setting There are 6 options available.

Restore Default You can restore the recorder to

factory settings.

Storage Store the video to Phone or SIM

card

Video player

It supports the videos in 3GP and MP4.

In such mode, you can have the

following operations to the specified file

in 3GP and MP4.

Options of the player

Options Description

Play It supports the videos in 3GP and will

not be limited by file size. Click the

play interface to play.

Send As multimedia message; as email;

via Bluetooth.

Rename You can rename the specified

video.

Delete You can delete the specified videos.

Delete all files You can delete all files.

Sort by For convenience of search, you can

rank them as per name, type, time

and size or choose “None”.

Storage You can choose video storage path

(to phone or memory card).

Steaming URL Set the streaming URL here.

Network

profiles Edit the network profiles here.

Storage You can choose video storage path

(to phone or memory card).

Photo editor

Here you can editor the phone as the

phone guides.

Audio player

If the operation system is Windows

2000 above, no driver needs installing. To

download music, you must insert the

T-Flash card into the mobile phone, switch

off the mobile phone, connect the

mobile phone and PC with USB cable,

then the PC will detect the new hardware

and create a new mobile HD. Download

the chosen MP3 file to under "My Music"

of the mobile disk rather than in such

folders as Audio, Images and Photos;

otherwise, the file cannot be played.

(Only the music in MP3, AMR and MIDI are

supportable).

Description of audio player options:

Options Description

Play Play the current chosen music.

Details View file name, track, SQ, file size,

music duration, music name, singer,

music album music type etc.

Add to

Ringtones Add the chosen music into the ring

base.

Refresh

list Enter the tracklist and update it (e.g.

the deleted music in the file

management will not disappear until

update is conducted.

Settings Play Settings: Tracklist path, automatic

tracklist, repeat, shuffle ,background

play.

Sound recorder

After choosing “Sound Recorder”

and click the “Start / Stop” to enter, you

can the previous record files. Press

“Options” to have the following

operations:

z New Record: You can record new

files.

z Play: You can play the selected file.

z Append: You can have annex record

for the files of the superior level (only

for the record files in AMR).

z Rename: You can rename the

chosen file.

z Delete: You can delete the chosen

file.

z Settings: You can set the storage

position for record files, including

phone and memory card. Also you

can set the format of the record file,

including AMR and WAV.

z Use as: You can used as user profiles.

z Send: You send the record file to

Bluetooth, email and multimedia

message.

FM radio

Your mobile phone supports FM radio. To

use the mobile phone to listen to radio,

insert the headset connection cable into

the headset port on the mobile phone.

The headset connection cable functions

as the antenna of the FM radio, so it

should hang freely. While listening to radio,

you can dial or receive a call normally.

During call conversation, the radio will

turn mute automatically. If some

applications are using GPRS or CSD to

send or receive data, they may interfere

with the radio.

When the FM radio is activated, the

mobile phone will display the number

and name (if having been saved) and

frequency of the radio channel.

Option menu

z Channel list: You can edit and save 30

channels.

z Manual input: You can edit the

specified radio frequency band. The

frequency of the radio is between

87.5mHz and 108.0mHz.

z Auto Search: You can have

automatic search and save the

searched channels into the list.

z Settings: You can set background

play, loud speaker, record format,

audio quality and record storage.

z Record: You can record new files.

z Append: You can have annex record

for the files of the superior level (only

for the record files in AMR).

z File list: the record files

Schedule FM record

You can schedule to record certain FM

Radio channel at any time, so that you

will not miss the program.

Melody composer

You can browser pictures as Slide show.

Select the files or pictures to browse.

Slide Show

You can browser pictures as Slide show.

Select the files or pictures to browse.

This mobile phone provides some

inbuilt games. Please refer to the

operation instructions attached to the

games.

My files

You can manage Audio, Images and

EBook.

[Phone]-- The storage body is phone.

[Open]: You can click the screen to have

Audio, Images and EBook Received

Audio— Audio Folder

z Open: You can see the current

image.

z New folder: You can set the current

file to a new folder.

z Rename: You can rename the files

z Delete: You can delete the current

record.

z Sort by: You can rank files as per

name, type, time and size or choose

“None”.

Images—Images Folder

z Open: You can see the current

image.

z New folder: You can set the current

file to a new folder.

z Rename: You can rename the files

z Delete: You can delete the current

record.

z Sort by: You can rank files as per

name, type, time and size or choose

“None”.

EBook—Ebook Folder

z Open: You can see the current

image.

z New folder: You can set the current

file to a new folder.

z Rename: You can rename the files

z Delete: You can delete the current

record.

z Sort by: You can rank files as per

name, type, time and size or choose

“None”.

Face book

By pressing this menu, you will be connected

to face book. Then, you can enjoy

accessing the well known face book social

networking.

CSL Fun club

With this function, you can surf the net

as the phone guides, such as News, Hot

Multimedia Download, blueberry store，

Football, Motor Racing, Basketball, etc.

Refer to the guide of the phone, and

have the functions.

Twitter

By pressing this menu, you will be

connected to twitter. Then, you can

enjoy accessing the well known social

networking

Messaging

SMS is a kind of network service that

cannot be used to send and receive

short messages until you apply to the

network operator.

Both SIM cards of the mobile phone

can send and receive SMS. The SMS is

sent to the SMS center of the network and

then sent by the network to the target

user (GSM user). If the user does not

switch on the mobile phone or the mobile

phone cannot receive the SMS (the

memory is full), the network will save the

SMS temporarily. The duration of storage

depends on sender’s settings and

network service provider.

With this function, the mobile phone

can send and receive chain text

messages, which may affect the

message fees. For more information,

please consult the service provider.

When the SMS capacity is full, there

will be an SMS icon flickering on the

standby interface. The full capacity can

affect SMS reception. Delete some SMS to

solve the problem.

If the other party has received SMS,

you will hear the alert sound from the

mobile phone (if such alert function is set

as ON)

Note: When sending SMS via the SMS

network, the mobile phone display

“Message sent”. It indicates that the SMS

has been sent to the SMS center inbox set

in the mobile phone but does not mean

the receiver has received the SMS. For

more information, please consult the

service provider.

Write Message

You can write message in this menu.

You can enter the phone number or

choose a number from the phonebook to

send the SMS. In dual-SIM standby mode,

you can choose to send the SMS via

SIM1or SIM2.

Inbox

You can see the SMS in the inbox.

z Reply: You can reply to the received

SMS/MMS.

z Call sender: You can make a call to

the sender by pressing the key.

z Forward: You can directly forward this

SMS/MMS to others.

z Delete: Delete the current SMS/MMS.

z Advanced:

¾ Use Number: You can extract the

number in the SMS and save it or

dial a call.

¾ Use URL: Use URL by pressing the key.

¾ Use email: Set the Email account

first.

¾ Use USSD: Use the USSD here.

¾ Copy to Phone: You can copy the

entries in SIM card onto the

phone.

¾ Move to Phone: You can move the

entries in SIM card onto the

phone.

Drafts

If you are editing the message and the

messages are not sent out immediately, the

messages will be save here. You can send,

edit, delete or have the advanced function.

Outbox

While sending SMS/MMS, you can

choose “Save and Send”, and you can

save the SMS/MMS into the Outbox. You

can directly save the edited SMS into the

Outbox, in such case; the Outbox will

display “No number”, i.e. no target

number. If you fail to send the SMS/MMS,

it will be saved in the Outbox. Also, you

can have such operations as send from

SIM1, send from SIM2, edit, delete, copy

to phone move to phone, delete all,

copy all, move all, use number ，use URL，

Use USSD and Use email address.

Sent message

The message are sent and saved

here.

related news headlines, which can

include one piece of news or a service

website.

Settings:

¾ Select SIM: Always ask/SIM1/SIM2

¾ Edit account: By this function you

can edit the account.

¾ Browser options-- You set whether to

display images during waiting time

and when browsing WebPages.

¾ Service message settings-- You can

choose ON or OFF to enable the

push or not and you can choose the

disable or always in the Trust settings.

Set SL settings functions as follow:

Never, confirm, without confirm.

Add new trust list including: number,

IP address, Domain name.

¾ Clear cache-- You can clear cache.

When the data of the cache are

excessive, network surfing speed

can be affected.

¾ Clear cookies-- You can clear

personal data.

¾ Trusted certificates--Entrust.net WAP

www.entrust.net/wapcps; US

VeriSign, Inc. Class 3 Public, primary

certification authority.

¾ Settings: Set the related parameters

as the phone guides.

Organizer

Calendar

With this function, you can set the

alarm clock to remind you of your

schedule and record your schedule. Roll

the highlight block to the desired date

and then the current date will be

highlighted in green. If the date is set with

memo function, then this date will be

highlighted in red. To view all memos of

one day, press OK to see the schedule.

You can have the following operations:

z View: You can view the schedule of

the date where the cursor is on and

set the time, date, content and

whether to activate alarm on this

schedule of todays. When editing the

schedule, you can choose alarm type

with the left and right direction keys.

In addition, you can have such

operations as Delete, Delete and Add

on the schedule.

z View all: You can view the entire

schedule of the date where the

cursor is on and set the time, date,

content and whether to activate

alarm on this schedule.

z Add event: you can select task type

as reminder, meeting, course.

z Delete event: You can delete the task

as the phone guides.

z Jump to Date: You can move to the

calendar of the specified date.

Tasks

You can have such operations as

Create Memo, Browse, Add, Edit, Delete,

Delete All and Send on memos.

If you have set alarm for the memo,

when the set time is reached, the mobile

phone will ring and display the memo

content.

Alarm

The time format for the alarm clock is

identical to that of clock. When the

mobile phone is off, the alarm clock can

still work provided the battery is sufficient.

The system has set 5 alarm clock options

and the defaulted is off. You can

activate one option or all options

according to the actual demand. Every

alarm clock option can set independent

time and date. When the time is reached,

the mobile phone will give out alert tone

and flicker the current time and date on

the screen. Press Stop to stop alarm clock;

press Sleep, then the mobile phone will

pause ringing and continue after 5 min.

If alarm time is reached but the

mobile phone is switched off, then the

mobile phone will be switch on

automatically and ring. If Stop is pressed,

then the mobile phone will ask you

whether to switch on the mobile phone.

Press “No” to switch off the mobile phone

and “Yes” to register at the network and

switch on the mobile phone.

Azan Alarm

You can have such operations as Set

Location, Qiblat Direct, Azan Sound and

Set Calculation Method.

If you have set the location, and

activate the alarm, the Azan alarm will

ring.

World Clock

Press the left and right direction keys

to view the current time of every country

corresponding to every time zone.

Notes

Record the notes here, and use the

concrete function as the phone guides.

Phone sync

Set the phone sync here as the

phone guides.

Calculator

z The upper direction key for “+” and

the lower direction key for “－”, the

left direction key for "×" and the right

direction key for "÷";

z Press the clear key to clear the latest

inputs or results digit by digit; press the

clear key long to clear all content or

result;

z Press “OK” key to obtain the result.

Note: The precision of this calculator is

limited and can be used for simple

calculation.

Unit converter

Input the unit and convert it to the

unit you want.

Currency Converter

To save exchange rate, press “OK”,

then choose to set exchange rate.

Choose one exchange rate from the

displayed options. After that, press “OK”

to confirm. Then the exchange rate will

be saved in the memory until you enter a

new one to replace it. To convert

currency, enter the sum to be converted,

press “OK” and then choose to local

currency or foreign currency.

Stop watch

Choose the function as the phone

guide to use the stopwatch.

You can choose Typical stopwatch

and nway stopwatch as the phone

guides.

Ebook reader

In standby, choose

[Menu/Extras/E-book Reader]. After

e-book is activated, the e-book list will be

displayed. If no e-book, click Options to

have such submenus as Clean Up

Bookshelf and Global Settings.

If there are e-books, you can choose

one e-book and press Options to have

such submenus as Open E-book, Update,

System Preset, Details, Delete, Delete All,

Ranking, Execute System Preset and Help.

z Open E-book: Activate the current

e-book and enter the reading menu.

z Clean up bookshelf: Choose this

function and the bookself will be

cleaned automatically,

z Global settings: You can set Font Style,

Font Size, Scroll By, Auto Scroll, Scroll

Speed, Full Screen, Encoding,

alignment and Storage Priority.

z Book info: Display the detailed

information about the current e-book.

z Delete: Delete the current e-book.

z Delete All files: Delete all e-books.

z Sort by: You can have such options as

As per Name, Type, Time, Size or None

to rank e-books.

z Apply global settings: You can

execute the options for the preset

system.

z Help: You can have some operation

instructions. Use key 0 to go to book

settings screen; use key 1 for help; use

key 2 to add a bookmark; use key 3 to

go to find screen; use key 4 to go to

jump to screen; use key 5 to go to

bookmark; use key 6 to find next; use

key 7 to toggle the auto scroll; use key

8 to remove bookmark; use key 9 to

toggle full screen mode.

Fun & Games

Java settings

¾ Java audio: you can select 1~7 and

off.

¾ Java vibration: On or off vibration.

¾ Heap size: default size is 2097152 bytes

Java default security

It contains third party, untrusted domain,

restore settings and domain options

This mobile phone provides some

inbuilt games. Please refer to the

operation instructions attached to the

games.

Java network

Refer to the phone to have the concrete

function.

Game

¾ BGM: On or off background audio.

¾ Sound effect: On or off audio.

¾ Vibration: On or off Vibration

¾ Volume: Up and Low Volume

Google

Gtalk

With this function, you can have

communication with others, by inputting

the Users name and the password, enter

the interface as the phone directs.

Google map

Launch this function, and you can

have the google map as the phone

guides.

Settings

Dual SIM switch

Select with the SIM status and use the

default mode.

Dual SIM settings

You can in any place and at any time set

the dual-mode mobile phone as the

following modes according to your own

demand:

 Dual SIM open

 Only SIM1 open

 Only SIM2 open

 Flight mode

Phone Settings

In such menu, you can set phone

language, standby wallpaper, time etc.

¾ Time and Date: With this function,

you can set city, time and date

format and the time of specific

place.

• Set Home City: You can set

different cities.

Note: This option must be used together

with auto update of time and date. Auto

update of time and data cannot be

conducted unless the network supports.

• Set Time and Date: You can set

the current time and date.

• Set Format: You can set the

display format for time and

date.

• Update with time zone: You

can set it On or Off

Note: If the battery is taken from the

mobile phone or the battery is used up for

long time, when switching on the mobile

phone after reinstalling the battery or

charging the battery, you need to reset

the time and date.

Special Note: In the area forbidding using

mobile phone (such as cabinet), you

must confirm to inactivate this function

before entering this area so as to prevent

accident.

¾ Schedule Power on/off: You can set

the time for schedule Power on/off.

¾ Language: You can choose the

desired language for phone display.

¾ Pref.input methods: Choose the

preferred input method.

¾ Encoding: Choose among the ASCII,

ISO-8859-1 and the Windows-1252 to

have the encoding function.

¾ Display Settings: You can set

standby menu display as wallpaper,

screen saver, power on display,

power off display, whether to

display time and date and owner

number (if set in the phonebook)

¾ Auto update of date and time: To

set the mobile phone to

automatically update time and

date according to the current time

zone, choose “Activate”. Auto

update of time and date will not

affect the alarm clock, calendar or

alarm clock memo setting time,

which will be subject to the time

and date when created. However,

auto update of time and date may

make some set alarm clocks out of

date.

¾ UART settings: Once connected to

the computer, you can select the

SIM card first as you choose here.

¾ Misc. Settings: You can adjust the

brightness and time of LCD backlight

and the Optical navigation sensitivity

here.

User profiles

Your mobile phone is provided with

multiple profiles so that you can

customize some settings in different cases

for different events. Firstly, as per your

personal hobby, have individualized

settings on profile and then activate it.

You can have such profiles as General,

Meeting, Outdoor, Indoor, Headset,

Headset and Bluetooth.

The content can be edited at every

profiles mode as following:

z Tone Setup: Include Incoming Call,

power-on, power-off, Message Tone

and Key Tone.

z Volume: Set the volume of Ring and

Key Tone.

z Alert type: You can choose any one

from Ring, Vibration, Vibration and

Ring ，Vibration then Ring as the

current ring mode.

z Ring Type: You can choose any one

from single, repeat and ascending as

the current ring type.

z Extra Tone: You can have on/off

settings on Warning Tone, Error Tone,

camp on Tone and Call Connect

Tone so as to have corresponding

tone tips.

z Answer Mode: You can choose

whether to use any key to answer.

After individualized settings, choose

“Activate” in “Select” to start profiles.

Note: After the headset is inserted into

the mobile phone, the mobile phone will

automatically change into headset

profile. Unplug the headset to return to

the previous profile.

In standby state, you can press # key to

switch to silence profile and again to the

previous profile.

Network Settings

Network Selection: You can search

the network again. Select your favorite

network and choose to register the

network automatically or manually.

Preferences: You can set the

preferred registered network for SIM card.

Security Settings

¾ SIM security settings

• Lock: You can set SIM lock (PIN

code) as on/off. When this

option is chosen, it is necessary

to input PIN code for every

insert of the SIM card.

• Fixed Dial: This function needs

the support of the SIM card

and the network operator.

When it is activated, you can

only dial the phone numbers

saved in host fixed dial list. To

activate it, you need to input

host PIN2 code.

• Change Password: You can

change the defaulted phone

by referring to the service

provider.

¾ Phone Lock: You can set it as On or

Off. It is a password of 4-8 digits and

the defaulted one is 1122. You can

change it.

¾ Auto Keypad Lock: You can set it as

On or Off. The mobile phone has

keypad lock function. When it lasts

certain time, the keypad will be

locked, including such options as

Off, 5s, 30s, 60s and 5min.

¾ Change Password: You can change

the defaulted phone password

“1122” into 4-8-digit number easy to

remember. If the phone lock is

activated, when switched on, the

mobile phone will hint “Phone

locked”. To unlock it, you can input

the phone lock password and click

OK.

¾ Certificate manager: It provides the

Auth. certificate and the User

certificate.

¾ Security encryption: Input the

password 1122 to continue the

function. Set the Text message

encryption, Phonebook

encryption, Call log encryption and

the Keypad encryption.

Connectivity

Bluetooth

Power: Before using Bluetooth

function, you need to activate this option.

When Bluetooth function or other

functions are being used, allowing this

function to operate in the back desk will

consume more power. It is

recommended to close this function

when it is idle.

Visibility: After this option is activated,

other peripheral devices supporting

Bluetooth wireless technology can see

your device and its name via search.

After the step audio play service is

activated, this device will be unable to

be searched.

My Device: After entering this option,

you will see the Bluetooth devices

compatible with the mobile phone.

Entering options, you can have necessary

operations on the desired Bluetooth

device or search the incompatible

Bluetooth devices.

Search audio device: With this

function, you can inquiry audio device.

For other devices, enter My Devices to

search.

Device Name: You can edit my

device name.

Advanced: Before using Bluetooth

function, enter this menu to have

corresponding settings. If your mobile

phone’s Bluetooth function is not

activated, you can have activation

confirmation.

 Audio Path: You can leave the

audio on my device or send to other

hand-free devices via Bluetooth. If

using Bluetooth to have a call, set

this path as hand-free devices.

 Storage: Store at the phone or the

SIM card

 Sharing permission: You can set the

file directory shared by my device

and the access right to online

Bluetooth devices.

 My address: Show the address here.

Conn. Management

It shows the status of the connectivity

Data account

GSM Data—You can set the number,

name DNS etc.

GPRS—You can set the name, APN, user

name, password, Auth. type, DNS.

Note: For related charging standard and

detailed settings, please consult the

local network service operator.

Different network service providers

provide different services. Consult

the local network operator.

Restore Factory Settings

You can restore the factory settings

of the mobile phone. The factory setting

password is 1122.

Sound effects

You can set the sound effect of the

audio effect and the bass enhancement.

5. Use of USB

Notices before use

z Always connect and stop USB device

correctly.

z Never use Windows formatting

command to format the mobile disk

of the mobile phone; otherwise, it will

be damaged severely.

z USB work environment:

o Windows2000 / XP.

o For other operation systems, the

connection between PC and the

mobile phone cannot be

conducted unless USB driver is

installed.

6. Maintenance &

Safety

Please read and observe the following

information for safe and proper use of

your phone and to prevent damage. Also,

keep the user guide in an accessible

place at all the times after reading it.

After sales service

You are kindly refer to the Warranty Card

provided in the sales package box.

Charger and Adapter Safety

Charger and adapter are designed for

indoor use only.

Battery Information and Care

o Please dispose of your battery

properly.

o Do not disassemble or short-circuit

the battery.

o Keep the battery’s metal contacts

clean.

o Recharge the battery after long

periods of non-use to maximize

battery life.

o Battery life will vary due to usage

patterns and environmental

conditions.

o The self-protection function of the

battery cuts the power of the phone

when its operation is in an abnormal

status. In this case, remove the

battery from the phone, reinsert it,

and turn the phone on.

General Notice

o Using a damaged battery or placing

a battery in your mouth may cause

serious injury.

o Do not place items containing

magnetic components such as a

credit card, phone card, bank book,

or subway ticket near your phone.

The magnetism of the phone may

damage the data stored in the

magnetic strip.

o Talking on your phone for long

period of time may reduce call

quality due to heat generated

during use.

o When the phone is not used for a

long period time, store it in a safe

place with the power cord

unplugged.

o Using the phone in proximity to

receiving equipment (i.e. TV or Radio)

may cause interference to the

phone.

o Do not immerse your phone in water.

If this happens, remove the battery

and take it to Authorized Service

Center.

o Do not paint your phone.

o The data saved in your phone might

be deleted due to careless use,

repair of the phone, or upgrade of

the software. Please backup your

important phone numbers. (Ring

tones, text messages, voice

messages, picture, and videos could

also be deleted.) The manufacturer

is not liable for damage due to the

loss of data.

o Do not turn your phone on or off

when the phone is close to your ear.

Troubleshooting

Phenomena Possible Causes

Unable to

switch on

1. Does the battery

have power?

2. Is the battery

placed correctly

SIM failed

1. The SIM card is

dirty. Clean it.

2. Reinstall the SIM

card.

3. The SIM card is

damaged.

Replace it.

Poor signals

Check the signal strength

icon on the screen. If the

icon contains 4 bars, it

indicates the signal is the

strongest; if below 1 bars,

it indicates the signal is

very poor.

Unable to

dial out

1. Maybe you have

set Hide My Caller

ID but your network

operator does not

provide this service

for you.

2. Strong interference

exists around you.

3. Maybe you have

activated the call

restriction function.

4. Maybe you have

activated Line 2

but your network

operator does not

provide this service

for you.

Unable to

charge the

battery

1. The battery may

discharge too

much; so it cannot

be charged until it

is connected for

certain time.

2. Its performance

has worsened.

Unable to

the network

1. Too weak signals or

strong interference.

2. SIM card installed

properly? Bad

contact or SIM

card damaged? If

the SIM card is

broken, please

contact the

network operator

to replace it.

Unable to

access

service

menus.

Maybe the SIM card does

not support service

function.

Only part of

the photo

set as

standby

photo can

be seen.

The size of the photo may

be too big. The

recommended size is

220*176

7. Abbreviations

SMS Short Message Service

EMS Enhanced Message Service

SIM Subscriber Identity Module

GSM Global System for Mobile

Communication

PIN Personal Identity Number

PUK PIN Unblocking Key

IMEI International Mobile

Equipment Identity

CB Cell Broadcast

GPRS General Packet Radio Service

MMS Multimedia Message service

Card

1 Host card (the card inserted in

SIM1 slot)

Card

2 Slave card (the card inserted

in SIM2 slot)

Warning

FCC RF Exposure Information

and Statement:

The SAR limit of USA (FCC) is

1.6W/kg averaged over one gram of

tissue.

Product, model number: E750 (FCC

ID: ZYPE750) has also been tested

against this SAR limit. The highest

SAR value reported under this

standard during product certification

for use at the head is

0.572W/kg and when properly worn

on the body is 1.395W/kg. The

device was tested for typical

body-worn operations with the back

of the handset kept 1.5cm from the

body. To maintain compliance with

FCC RF exposure requirements,

use accessories that maintain a

1.5cm separation distance between

the user body and the back of the

handset .The use of belt clips,

holders and similar accessories

should not contain metallic

components in its assembly. The

use of accessories that do not

satisfy these requirements may not

comply with FCC RF exposure

requirements, and should be

avoided.

This device complies with part 15 of the

FCC Rules. Operation is subject to the

following two conditions: (1) This device

may not cause harmful interference, and (2)

this device must accept any interference

received, including interference that may

cause undesired operation.

Any Changes or modifications not expressly

approved by the party responsible for

compliance could void the user’s authority to

operate the equipment.

Note: This equipment has been

tested and found to comply with the

limits for a Class B digital device,

pursuant to part 15 of the FCC Rules.

These limits are designed to provide

reasonable protection against

harmful interference in a residential

installation. This equipment

generates uses and can radiate

radio frequency energy and, if not

installed and used in accordance

with the instructions, may cause

harmful interference to radio

communications. However, there is

no guarantee that interference will

not occur in a particular installation.

If this equipment does cause

harmful interference to radio or

television reception, which can be

determined by turning the

equipment off and on, the user is

encouraged to try to correct the

interference by one or more of the

following measures:

—Reorient or relocate the receiving

antenna.

—Increase the separation between

the equipment and receiver.

—Connect the equipment into an

outlet on a circuit different from that

to which the receiver is connected.

—Consult the dealer or an

experienced radio/TV technician for

help.

Nexpro Limitada E750 GSM Mobile Phone User Manual 2

Nexpro International Limitada GSM Mobile Phone 2

Users Manual

Navigation menu

Namespaces

Views

Navigation