Nextivity orporated P24512NU Provider Specific Consumer Signal Booster User Manual 1

Nextivity Incorporated Provider Specific Consumer Signal Booster Users Manual 1

Contents

Users Manual 1

NOTE: The brackets come equipped with screws and inserts for mounting in stan-dard drywall. Before you install the mounts, make sure there are no wires or other objects, or metal plates, behind the drywall layer that will interfere with the in-serts, screws, or mount, or mounted units. NOTE: The Network Unit only has mounting holes on the back. The Coverage Unit has mounting holes on the bottom and on the back. The holes on the bottom of the Coverage Unit can be used for mounting the Coverage Unit on a ceiling. (See 6b)REQUIRED HARDWARECopyright © 2014 by Nextivity, Inc, U.S. Patents pending. All rights reserved. The Nextivity and Cel-Fi logos are registered trademarks of Nextivity Inc. All other trademarks or registered trademarks listed belong to their respective owners. Designed by Nextivity Inc in California.Each Cel-Fi Device may be supplied with mounting brackets and hardware to mount both (or either) the Coverage Unit and the Network Unit.form-bracket-PRO-English_14-0515Mounting Instructions for Cel-Fi PROFor more information, refer to the Quick Start Guide or visit www.cel-.com CEL-FI PRO SMART SIGNAL BOOSTER6Attach the Cel-Fi Unit to the wall mounted bracket.6b Optional: Attach the Cel-Fi Unit to a ceiling mounted bracket.Network UnitCoverage UnitFor more information, visit www.Cel-Fi.comNetwork UnitCoverage UnitTo ensure ceiling mounting is as secure as possible, confirm that the mounting bracket posts are firmly inserted, and in the correct position.(x4)Coverage UnitUpside Down(x4)Slide Coverage Unit until secure.Mounting Posts
Figure 1. Coverage Unit, back view with mounting holes.Figure 2. Coverage Unit, bottom view of mounting holes.Figure 3. Network Unit, back view of mounting holes.For more information, refer to the Quick Start Guide or visit www.cel-.com CEL-FI PRO SMART SIGNAL BOOSTERCoverage Unit Back Mounting HolesCoverage Unit Bottom Mounting HolesNetwork (Window) Unit Back Mounting Holes1Determine Cel-Fi Device Location (refer to Quick Start Guide)2Determine Mounting Hole Locations3Drill Anchor Holes (Drywall) 4Install Anchors (Drywall)3G/4G/LTENetworkUnitCoverageUnitIn each marked spot, use a 3/16” drill bit to drill guide holes for the anchors.5Install Mounting Bracket

Navigation menu