Nihon Kohden GZ-1XXP SDIO Wireless Module User Manual x
Nihon Kohden Corporation SDIO Wireless Module x
(Update)User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2369302 |
| Application ID | WVT3g3dQvi+LhxcUGW142A== |
| Document Description | (Update)User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 9.62kB (120215 bits) |
| Date Submitted | 2014-08-26 00:00:00 |
| Date Available | 2015-02-22 00:00:00 |
| Creation Date | 2014-08-08 19:34:23 |
| Producing Software | Acrobat Distiller 10.1.2 (Windows) |
| Document Lastmod | 2014-08-25 18:04:42 |
| Document Title | Microsoft Word - User Manual.docx |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | 14539 |
User Manual Since this module is not sold to general end users directly, there is no user manual of module. For the details about this module, please refer to the specification sheet of module. About professional installation, please refer to “02 FCC Declaration of Professional Installation”. To show the installation to the limited host product, please refer to “08 (Confidential)Theory of Operation_host device specification.pdf”. For the representative host product, please refer to “08 (Confidential)Theory of Operation_host device specification”. Based on the above conditions, the statements for RF Exposure will be indicated as follows; “This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of RF energy that are deemed to comply without testing of specific absorption ratio (SAR).” The following information must be indicated on the host device of this module; [for FCC] Contains Transmitter Module FCC ID: B6BGZ-1XXP or Contains FCC ID: B6BGZ-1XXP This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. *If it is difficult to describe this statement on the host product due to the size, please describe in the User's manual. [for IC] Contains Transmitter Module IC: 4704A-GZ1XXP or Contains IC: 4704A-GZ1XXP The following statements must be described on the user manual of the host device of this module; [for FCC] FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of RF energy that are deemed to comply without testing of specific absorption ratio (SAR). [for IC] This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante. This radio transmitter IC: 4704A-GZ1XXP has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Le présent émetteur radio IC: 4704A-GZ1XXP a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal et l'impédance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that are deemed to comply without testing of specific absorption ratio (SAR). Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées pour un environnement non contrôlé et respecte les règles d’exposition aux fréquences radioélectriques (RF) CNR-102 de l’IC. Cet équipement émet une énergie RF très faible qui est considérée conforme sans évaluation du débit d’absorption spécifique (DAS). [for FCC and IC] This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. 5.15-5.35GHz band is restricted to indoor operations only. La bande 5 150-5 350 MHz est restreints à une utilisation à l’intérieur.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : 14539 Create Date : 2014:08:08 19:34:23+09:00 Modify Date : 2014:08:25 18:04:42+09:00 XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2014:08:25 18:04:42+09:00 Format : application/pdf Title : Microsoft Word - User Manual.docx Creator : 14539 Producer : Acrobat Distiller 10.1.2 (Windows) Document ID : uuid:bc3e4825-a72c-4150-b2bc-5dc8b57cb470 Instance ID : uuid:91db11cb-5f5c-44c0-8d45-d7c9a40e5c27 Page Count : 4EXIF Metadata provided by EXIF.tools