Nikko Co 1401RX-49-1 TWIN TRUCK User Manual USERS MANUAL

Nikko Co Ltd TWIN TRUCK USERS MANUAL

USERS MANUAL

1. Slide ON/OFF on bottom of chassis to ON.2. Use the transmitter’s control levers to steer your vehicle, as shown at left.3. Slide ON/OFF on the vehicle to OFF when you nish driving.Wheel AlignmentIf your vehicle does not drive in a straight line when you release the right stick, adjust WHEEL ALIGNMENT on bottom of chassis. Push to L if the vehicle is pulling to the right or to R if the vehicle is pulling to the left.driving your vehiclePlease read this user’s guide before installing, setting up and using your new productwww.radioshack.comActual product may vary from the images found in this document.60-44562-Pack 1:14 Scale Jeep & Hummer©2006. RadioShack Corporation. All rights reserved. RadioShack and RadioShack.com are trademarks used by RadioShack Corporation. 60-445606A06Printed in ChinaHummer JeepVehicle Antenna Tube (2) Transmitter (2)Transmitter Antenna (2) User’s GuideThank you for purchasing your 2-Pack 1:14 Scale Jeep & Hummer from RadioShack. Each vehicle has a different frequency - 27MHz for the Hummer, 49MHz for the Jeep - so you and a friend can drive together. The headlights turn on as you drive forward and the taillights turn on in reverse.what’s includedThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult your local RadioShack store or an experienced radio/TV technician for help. If you cannot eliminate the interference, the FCC requires that you stop using your product. Changes or modications not expressly approved by RadioShack may cause interference and void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. The carrier frequency ....................................................27.145MHz/49.86MHzField Strength ...................................................................<80 dBµV/m at 3mOnly use the antenna supplied with this product.This radiocommunication device complies with all the requirements of Industry Canada Standard RSS-310. Ce dispositif de radiocommunication rencontre toutes les exigences de la norme CNR-310 d’Industrie Canada.This product is warranted by RadioShack against manufacturing defects in material and workmanship under normal use for ninety (90) days from the date of purchase from RadioShack company-owned stores and authorized RadioShack franchisees and dealers. For complete warranty details and exclusions, check with your local RadioShack store.RadioShack Customer Relations300 RadioShack Circle, Fort Worth, TX 76102 04/04RF emission informationlimited 90-day warranty• Do not use your vehicle near devices with transmitters using the same frequency (27 or 49 MHz). • If someone uses a CB nearby, it might interfere with the control of your vehicle. If this happens, move the vehicle away from the CB.• Never play with the vehicle in the street.• Be careful when you use the vehicle to avoid high-impact collisions with people and objects.safety and careIn Your Transmitter Insert one 9V battery (not supplied) in the battery compartment matching the polarity symbols (+ and -) marked inside.In Your Vehicle Turn off your vehicle. Insert six AA alkaline batteries (not supplied) in the battery compartment matching the polarity symbols (+ and -) marked inside.• If you do not plan to use your vehicle for a week or more, remove the batteries. Batteries can leak chemicals that may damage electronic parts.• Dispose of old batteries promptly and properly. Do not burn or bury them.• Use only fresh batteries of the required size and recommended type.• Do not mix old and new batteries, or batteries with different capacities or different chemistries.• If your vehicle does not respond, drives slowly, or the range reduces, replace the batteries in your vehicle.battery notesinstalling the batteries2 Screw each antenna into its transmitter. Extend to full height during use.Left Straight RightForwardStopReverse1Thread each vehicle’s antenna wire through the supplied antenna tube. Then, insert the tube into the antenna tube holder on the vehicle’s body.60-4456 A3 edited.indd 1 06/19/2006 17:06:06

Navigation menu