Nikon 2148EA Wireless Mobile Adapter User Manual

Nikon Corporation Wireless Mobile Adapter Users Manual

Users Manual

LEDWPS buttonFigure 1: Inserting the adapter (D3200 shown)Figure 2: Example of how the strap and case should be attachedStrapCaseEnWireless Mobile Adapter WU-1aWireless Mobile Adapter WU-1bUser’s ManualEnglishThank you for your purchase of a Nikon wireless mo-bile adapter that allows connections between your camera and Wi-Fi equipped smartphones, tablets, and other smart devices (for information on whether your camera can be used with the adapter, see the camera manual). Before using this product, read this manual and the documentation provided with your camera and the Wireless Mobile Adapter Utility app.Download picturesRemote control Share picturesThe Wireless Mobile Adapter Utility manual is available for download from the following website. Check the website to confi rm that the Wireless Mobile Adapter Utility is supported on your smart device.http://nikonimglib.com/ManDL/WMAU/For Your SafetyTo prevent damage to your Nikon product or injury to your-self or to others, read the following safety precautions in their entirety before using this product. Keep these safety instruc-tions where all those who use the product will read them.The consequences that could result from failure to observe the precautions listed in this section are indicated by the fol-lowing symbol:AThis icon marks warnings, information that should be read before using this Nikon product to prevent pos-sible injury.WARNINGSA Do not disassemble. Failure to observe this precaution could result in fi re, electric shock, or other injury. Should the prod-uct break open as the result of a fall or other accident, disconnect the camera power source and take the product to a Nikon-authorized service representative for inspection.A Cut power immediately in the event of malfunction. Should you notice smoke or an unusual smell coming from the prod-uct, immediately turn the camera off . Continued opera-tion could result in injury. Once the product has cooled, remove it and take it to a Nikon-authorized service repre-sentative for inspection.A Do not use in the presence of  ammable gas. Failure to observe this precaution could result in explosion or fi re.A Keep dry. Do not immerse in or expose to water or rain. Failure to observe this precaution could result in fi re or electric shock.A Do not handle with wet hands. Failure to observe this pre-caution could result in electric shock.A Keep out of reach of children. Failure to observe this precau-tion could result in injury. In addition, note that small parts constitute a choking hazard. Should a child swallow any part of this product, consult a physician immediately.A Do not remain in contact with the camera or adapter for extended periods while the products are on or in use. Parts of the prod-uct become hot. Leaving the product in direct contact with the skin for extended periods may result in low-temperature burns.A Do not expose to high temperatures. Do not leave the product in a closed vehicle under the sun or in other areas subject to extremely high temperatures. Failure to observe this precaution could result in fi re or in damage to the casing or internal parts.A Follow the instructions of hospital and airline personnel. This product emits radio frequency radiation that could inter-fere with medical or navigational equipment. Do not use this product in a hospital or on board an airplane without fi rst obtaining the permission of hospital or airline staff .Notices• No part of this manual may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form, by any means, without Nikon’s prior written permission.• Nikon reserves the right to change the specifi cations of the hardware and software described in this manual at any time and without prior notice.• Nikon will not be held liable for any damages resulting from the use of this product.• While every eff ort has been made to ensure that the infor-mation in this manual is accurate and complete, we would appreciate it were you to bring any errors or omissions to the attention of the Nikon representative in your area (ad-dress provided separately).This product, which contains encryption software developed in the United States, is controlled by the United States Export Administration Regulations and may not be exported or re-exported to any country to which the United States embar-goes goods. The following countries are currently subject to embargo: Cuba, Iran, North Korea, Sudan, and Syria.Notices for Customers in the U. S. A. and CanadaThis equipment complies with FCC/IC radiation exposure lim-its set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF en-ergy that are deemed to comply without testing of specifi c absorption ratio (SAR).This device complies with Part 15 of FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is sub-ject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any in-terference, including interference that may cause undesired operation of this device.Trade Name: Model: WU-1a, Model: WU-1bFCC ID: CGJ2148EAIC: 4634A-2148EANotices for Customers in the U. S. A.FCC CAUTIONChanges or modifi cations not expressly approved by the par-ty responsible for compliance could void the user’s authority to operate the equipment.Co-locationThis transmitter must not be co-located or operated in con-junction with any other antenna or transmitter. Nikon Inc.,1300 Walt Whitman Road, Melville, New York11747-3064, U.S.A. Tel.: 631-547-4200On the Use of Wireless FunctionsPacemakers, hearing aids, and other medical devices can be aff ected by radio interference from the product, as can air-craft navigational equipment. Users with implantable cardiac pacemakers should remain at least 30 cm from the product. Turn the product off in trains and other crowded places, and either turn the product off or disable all wireless transmis-sions in the vicinity of medical devices, when in medical insti-tutions and other locations in which wireless devices are pro-hibited, or when so instructed by airline personnel. Contact the airline for more information on using wireless devices on aircraft. If use of the wireless features of this product causes radio interference, disable the wireless features or turn the product off . Failure to observe this precaution could result in accidents or product malfunction.SecurityAlthough one of the benefi ts of this product is that it allows others to freely connect for the wireless exchange of data anywhere within its range, the following may occur if secu-rity is not enabled:• Data theft: Malicious third-parties may intercept wireless transmissions to steal user IDs, passwords, and other per-sonal information.• Unauthorized access: Unauthorized users may gain access to the network and alter data or perform other malicious actions.Note that due the design of wireless networks, specialized attacks may allow unauthorized access even when security is enabled.Using the Wireless Mobile AdapterInstall the app to your smart device.1 Find the app.On your smart device, open Google Play and search for “Wireless Mobile Adapter Utility”.2 Install the app.Follow the on-screen instruc-tions to download and install the app.Access the camera from your smart device.1 Insert the wireless mobile adapter.Insert the adapter into your camera (Figure 1) and turn the camera on.2 Ready the smart device.On the smart device, open Wi-Fi settings and se-lect WPS button connection to ready the device for a WPS button connection.3 Press the WPS button for about 5 seconds.Hold down the WPS button on the wireless mobile adapter until the LED  ashes red and green.4 Start the Wireless Mobile Adapter Utility app.When a connection is established, the LED will glow green and the main dialog for the Wireless Mobile Adapter Utility will be displayed on the smart device.You can now access the camera from the smart de-vice. For more information, consult the documenta-tion for Wireless Mobile Adapter Utility.Deactivate the adapter.To end wireless transmission, turn the camera o and disconnect the adapter. Connection StatusThe status of the connection between the camera and the wireless mobile adapter is shown by the adapter LED:LEDLEDStatusStatusKOn (green) ConnectedHFlashes green once every 2 s Ready to connectHFlashes green rapidly (rate var-ies with connection speed) TransmittingHSlow green fl ash once every 5 s Adapter in sleep modeHFlashes red once every 0.5 s Connection errorSleep ModeTo reactivate the adapter after it has entered sleep mode, press the WPS button.Restoring Default SettingsTo restore default settings, keep the WPS button pressed for over 10 seconds and then press the but-ton again when the LED  ashes orange. The LED will stop  ashing, showing that the adapter has been reset.Specifi cationsTypeType WU-1a, WU-1bWirelessWirelessStandardsStandards IEEE 802.11b, IEEE 802.11gCommunication Communication protocolsprotocols• IEEE 802.11b: DSSS/CCK• IEEE 802.11g: OFDMOperating frequencyOperating frequency 2412–2462 MHz (channels 1–11)Range (line of sight)Range (line of sight) Approximately 10–15 m/33–49 ftData rateData rate * * 54 MbpsSecuritySecurity • Authentication: Open system, WPA2-PSK• Encryption: AESWireless setupWireless setup Supports WPSAccess protocolsAccess protocols InfrastructureData transfer protocolsData transfer protocols PTP, PTP-IPPower consumptionPower consumption Approximately 1.65 W maximumOperating environmentOperating environment • Temperature: 0–40 °C/32–104 °F• Humidity: Less than 85% (no condensation)Approximate Approximate dimensions (W × H × D)dimensions (W × H × D)• WU-1a: 18 × 21 × 10 mm/0.7 × 0.8 × 0.4 in.• WU-1b: 18 × 23 × 10 mm/0.7 × 0.9 × 0.4 in.WeightWeight Approximately 3 g/0.1 oz (body only)* Maximum logical data rates according to IEEE standard. Actual rates may diff er.Step 1Step 1Step 2Step 2Step 3Step 3A The Supplied Strap and CaseUse these accessories as shown in Figure 2 to prevent the adapter being lost or dropped.A WPSWPS (Wi-Fi Protected Setup) is a standard designed to make it easy to establish a secure wireless network. For information on the steps involved and the length of time the smart device will wait for a connection, see the documentation supplied with the smart device. A Manual Wireless Connections1 Display Wi-Fi settings for the smart device.2 Select the mobile adapter SSID (the default SSID begins with “Nikon_WU_”). The LED will light green when a connection is established.

Navigation menu