Nikon 1 V2 Reference Manual

1 V2 - Reference Manual 1V2RM_EN Free User Guide for Nikon 1 and COOLPIX Series Camera, Manual - page1

2015-08-19

: Nikon Nikon-1-V2-Reference-Manual-791351 nikon-1-v2-reference-manual-791351 nikon pdf

Open the PDF directly: View PDF .
Page Count: 236

Download
Open PDF In Browser	View PDF

DIGITAL CAMERA

Reference Manual

Thank you for your purchase of a Nikon digital camera. To get
the most from your camera, please be sure to read all instructions thoroughly and keep them where they will be read by all
who use the product.
Camera Settings
The explanations in this manual assume that default settings are used.
Symbols and Conventions
To make it easier to find the information you need, the following symbols and conventions are used:
This icon marks cautions; information that should be read before

D use to prevent damage to the camera.

This icon marks notes; information that should be read before

A using the camera.

0 This icon marks references to other pages in this manual.
The 1, 3, 4, and 2 symbols represent up, down, left, and right on the
multi selector.
Digitutor
“Digitutor”, a series of “watch and learn” manuals in movie form, is available from the following website:
http://www.nikondigitutor.com/index_eng.html
A For Your Safety
Before using the camera for the first time, read the safety instructions in
“For Your Safety” (0 x–xii).

Getting the Most from Your Camera

Table of Contents

s Introduction

z Auto Mode

0 23

# t, u, v, and w Modes

0 33

b Best Moment Capture Mode

0 41

y Advanced Movie Mode

0 49

9 Motion Snapshot Mode

0 59

t More on Photography

0 63

I More on Playback

0 81

Q Connections

0 91

o The Playback Menu

0 109

i The Shooting Menu

0 119

g The Setup Menu

0 159

n Technical Notes

0 169
i

Getting the Most from Your Camera
Take photos with the shutter-release button.
Photos can be taken in any
mode by pressing the shutterrelease button. In Motion Snapshot mode(0 59), the camera
will also record a brief movie
vignette.

Shoot movies with the movie-record button.
Movies can be recorded by
pressing the movie-record button in auto, advanced movie, t,
u, v, and w modes. Choose
auto mode (0 23) for basic
recording, advanced movie
mode (0 49) for more advanced
techniques.

Create short movies with music.
q Install the supplied software (0 91), w copy photos and
movies to your computer (0 95), and e use Short Movie Creator to create short movies (0 98).

View short movies in high definition.
q Transfer short movies to the camera (0 99) and use an
HDMI cable to w connect the camera to an HDTV (0 100).

Accessories
Expand your photographic horizons with a wide variety of interchangeable lenses, flash units, and other accessories (0 169).

Lenses

Flash units

GPS units

Remote
controls

Software for
Nikon digital
cameras
(available on
CD)

Mount
adapters

Wireless
mobile
adapters

iii

Table of Contents
Getting the Most from Your Camera ......................................... ii
Accessories .............................................................................................. iii
For Your Safety............................................................................... x
Notices..........................................................................................xiii
Introduction

Package Contents..........................................................................1
Parts of the Camera.......................................................................2
The Camera Body ................................................................................... 2
The Monitor.............................................................................................. 4
The $ (Display) Button .................................................................. 5
The Mode Dial ......................................................................................... 7
The Multi Selector .................................................................................. 8
The & (Feature) Button........................................................................ 9
The G Button..................................................................................10
First Steps......................................................................................12
Auto Mode

Taking Photos in Auto Mode.....................................................23
Viewing Photographs .................................................................30
Deleting Pictures ..................................................................................31
Recording Movies in Auto Mode ..............................................32
t, u, v, and w Modes

Taking Photos in t, u, v, and w Modes ...............................34
t Programmed Auto..........................................................................34
u Shutter-Priority Auto .....................................................................35
v Aperture-Priority Auto ..................................................................36
w Manual................................................................................................37
Recording Movies in t, u, v, and w Modes.........................40

Best Moment Capture Mode

Slow View......................................................................................41
Smart Photo Selector..................................................................44
Viewing Photos Taken with the Smart Photo Selector ........ 47
Choosing the Best Shot ..................................................................... 47
Deleting Pictures.................................................................................. 48
Advanced Movie Mode

HD Movies..................................................................................... 49
Slow Motion .................................................................................53
Viewing Movies ...........................................................................56
Deleting Movies ................................................................................... 57
Motion Snapshot Mode

Shooting in Motion Snapshot Mode ....................................... 59
Viewing Motion Snapshots .......................................................62
Deleting Motion Snapshots ............................................................. 62
More on Photography

Single-Frame, Continuous, Self-Timer, and
Remote Control Modes......................................................... 63
Continuous Mode................................................................................ 63
Self-Timer and Remote Control Modes ....................................... 65
Exposure Compensation ........................................................... 68
The Built-in Flash......................................................................... 69
Choosing a Flash Mode ..................................................................... 70
Optional Flash Units ................................................................... 72
Attaching Flash Units ......................................................................... 72
Taking Pictures ..................................................................................... 73
The GP-N100 GPS Unit ............................................................... 76
Attaching the GP-N100...................................................................... 76
Setup Menu Options .......................................................................... 77
The WU-1b Wireless Mobile Adapter ......................................79
v

More on Playback

Photo Information.......................................................................81
Thumbnail Playback ...................................................................84
Calendar Playback.......................................................................85
Playback Zoom.............................................................................86
Deleting Pictures .........................................................................87
Deleting the Current Picture............................................................87
The Playback Menu .............................................................................87
Rating Pictures .............................................................................88
Slide Shows...................................................................................89
Connections

Installing the Supplied Software..............................................91
System Requirements.........................................................................93
Viewing and Editing Pictures on a Computer ........................95
Transferring Pictures...........................................................................95
Viewing Pictures ...................................................................................96
Creating Short Movies........................................................................98
Viewing Pictures on TV............................................................ 100
High-Definition Devices.................................................................. 100
Printing Photographs .............................................................. 102
Connecting the Printer.................................................................... 102
Printing Pictures One at a Time.................................................... 103
Printing Multiple Pictures............................................................... 104
Creating a DPOF Print Order: Print Set ...................................... 108
The Playback Menu

109

Selecting Multiple Images.............................................................. 111
Image Review ............................................................................ 112
Rotate Tall .................................................................................. 112
Protect ........................................................................................ 112
Rating.......................................................................................... 112
D-Lighting.................................................................................. 113
vi

Resize...........................................................................................114
Crop .............................................................................................115
Edit Movie...................................................................................116
Change Theme...........................................................................117
The Shooting Menu

119

Reset Shooting Options ...........................................................122
Exposure Mode..........................................................................122
Image Quality.............................................................................123
Image Size...................................................................................123
Continuous .................................................................................125
Silent Photography...................................................................125
Number of Shots Saved ...........................................................125
Frame Rate..................................................................................125
Movie Settings ...........................................................................126
Movie Before/After ...................................................................127
File Format..................................................................................128
Metering .....................................................................................128
Autoexposure Lock ...........................................................................129
White Balance ............................................................................130
Fine-Tuning White Balance............................................................131
Preset Manual .....................................................................................132
ISO Sensitivity ............................................................................135
Picture Control...........................................................................136
Modifying Picture Controls ............................................................136
Custom Picture Control............................................................140
Edit/Save...............................................................................................140
Load from/Save to Card ..................................................................141
Auto Distortion Control ...........................................................142
Color Space.................................................................................143
Active D-Lighting ......................................................................144
HDR (High Dynamic Range) ....................................................145
vii

Long Exposure NR .................................................................... 146
High ISO Noise Reduction....................................................... 146
Movie Sound Options .............................................................. 147
Vibration Reduction................................................................. 148
Focus Mode................................................................................ 149
Manual Focus...................................................................................... 151
AF-Area Mode ........................................................................... 153
Focus Lock ........................................................................................... 154
Face-Priority .............................................................................. 156
Built-in AF Assist ....................................................................... 156
Flash Control ............................................................................. 157
Flash Compensation ................................................................ 158
The Setup Menu

159

Reset Setup Options ................................................................ 160
Format Memory Card............................................................... 161
Slot Empty Release Lock ......................................................... 161
Display Brightness.................................................................... 161
Grid Display ............................................................................... 162
Auto Power Off.......................................................................... 162
Self-Timer................................................................................... 162
Remote Control......................................................................... 163
Remote on Duration ................................................................ 163
Assign AE/AF-L Button ............................................................ 163
Shutter Button AE Lock ........................................................... 163
Flicker Reduction...................................................................... 164
Reset File Numbering .............................................................. 164
Time Zone and Date................................................................. 165
Language ................................................................................... 165
Auto Image Rotation................................................................ 166
Pixel Mapping ........................................................................... 167
Firmware Version ..................................................................... 167
viii

Technical Notes

169

Optional Accessories ................................................................169
Approved Memory Cards................................................................172
Approved Eye-Fi Cards ....................................................................173
Attaching a Power Connector and AC Adapter......................174
Storage and Cleaning...............................................................176
Storage ..................................................................................................176
Cleaning ................................................................................................176
Caring for the Camera and Battery: Cautions......................177
Available Settings .....................................................................181
Defaults.......................................................................................185
Memory Card Capacity.............................................................186
Troubleshooting........................................................................188
Battery/Display ...................................................................................188
Shooting (All Modes)........................................................................189
Shooting (t, u, v, and w Modes).............................................190
Movies....................................................................................................190
Playback ................................................................................................191
Miscellaneous .....................................................................................191
Error Messages...........................................................................192
Specifications.............................................................................195
Nikon 1 V2 Digital Camera..............................................................195
Battery Life ...........................................................................................210
Index ............................................................................................211

For Your Safety
To prevent damage to your Nikon product or injury to yourself or to others,
read the following safety precautions in their entirety before using this equipment. Keep these safety instructions where all those who use the product will
read them.
The consequences that could result from failure to observe the precautions
listed in this section are indicated by the following symbol:
icon marks warnings. To prevent possible injury, read all warnA This
ings before using this Nikon product.
❚❚WARNINGS
A Keep the sun out of the frame. Keep the
sun well out of the frame when
shooting backlit subjects. Sunlight
focused into the camera when the
sun is in or close to the frame could
cause a fire.

A Do not look at the sun through the viewfinder. Viewing the sun or other
strong light source through the viewfinder could cause permanent visual
impairment.

A Using the viewfinder diopter adjustment
control: When operating the viewfinder diopter adjustment control
with your eye to the viewfinder, care
should be taken not to put your finger in your eye accidentally.

A Turn off immediately in the event of malfunction. Should you notice smoke or
an unusual smell coming from the
equipment or AC adapter (available
separately), unplug the AC adapter
and remove the battery immediately,
taking care to avoid burns. Continued
operation could result in injury. After
removing the battery, take the equipment to a Nikon-authorized service
center for inspection.

A Do not use in the presence of flammable
gas. Do not use electronic equipment
in the presence of flammable gas, as
this could result in explosion or fire.

A Do not disassemble. Touching the product’s internal parts could result in
injury. In the event of malfunction,
the product should be repaired only
by a qualified technician. Should the
product break open as the result of a
fall or other accident, remove the battery and/or AC adapter and then take
the product to a Nikon-authorized
service center for inspection.

A Keep out of reach of children. Failure to
observe this precaution could result
in injury. In addition, note that small
parts constitute a choking hazard.
Should a child swallow any part of
this equipment, consult a physician
immediately.

A Do not place the strap around the neck of
an infant or child. Placing the camera
strap around the neck of an infant or
child could result in strangulation.

A Do not remain in contact with the camera,
battery, or charger for extended periods
while the devices are on or in use. Parts of
the device become hot. Leaving the
device in direct contact with the skin
for extended periods may result in
low-temperature burns.

A Do not aim the flash at the operator of a
motor vehicle. Failure to observe this
precaution could result in accidents.

A Observe caution when using a flash.
• Using the camera with the flash in
close contact with the skin or other
objects could cause burns.
• Using a flash close to the subject’s
eyes could cause temporary visual
impairment. Particular care should
be observed when photographing
infants, when the flash should be no
less than one meter (39 in.) from the
subject.

A Avoid contact with liquid crystal. Should
the displays break, care should be
taken to avoid injury due to broken
glass and to prevent the liquid crystal
from the displays touching the skin or
entering the eyes or mouth.

A Observe proper precautions when handling
batteries. Batteries may leak or
explode if improperly handled.
Observe the following precautions
when handling batteries for use in
this product:
• Use only batteries approved for use
in this equipment.
• Do not short or disassemble the
battery.
• Be sure the product is off before
replacing the battery. If you are
using an AC adapter, be sure it is
unplugged.

• Do not attempt to insert the battery
upside down or backwards.
• Do not expose the battery to flame
or to excessive heat.
• Do not immerse in or expose to
water.
• Replace the terminal cover when
transporting the battery. Do not
transport or store the battery with
metal objects such as necklaces or
hairpins.
• Batteries are prone to leakage when
fully discharged. To avoid damage
to the product, be sure to remove
the batter y when no charge
remains.
• When the battery is not in use,
attach the terminal cover and store
in a cool, dry place.
• The battery may be hot immediately after use or when the product
has been used on battery power for
an extended period. Before removing the battery turn the camera off
and allow the battery to cool.
• Discontinue use immediately
should you notice any changes in
the battery, such as discoloration or
deformation.

A Observe proper precautions when handling A Use appropriate cables. When connectthe charger:
• Keep dry. Failure to observe this
precaution could result in fire or
electric shock.
• Do not short the charger terminals.
Failure to observe this precaution
could result in overheating and
damage to the charger.
• Dust on or near the metal parts of
the plug should be removed with a
dry cloth. Continued use could
result in fire.
• Do not go near the charger during
thunderstorms. Failure to observe
this precaution could result in electric shock.
• Do not handle the plug or charger
with wet hands. Failure to observe
this precaution could result in electric shock.
• Do not use with travel converters or
adapters designed to convert from
one voltage to another or with DCto-AC inverters. Failure to observe
this precaution could damage the
product or cause overheating or fire.

xii

ing cables to the input and output
jacks, use only the cables provided or
sold by Nikon for the purpose to
maintain compliance with product
regulations.

A CD-ROMs: CD-ROMs containing software or manuals should not be
played back on audio CD equipment.
Playing CD-ROMs on an audio CD
player could cause hearing loss or
damage the equipment.

Notices
• No part of the manuals included • Nikon will not be held liable for any
with this product may be repro- damages resulting from the use of
duced, transmitted, transcribed, this product.
stored in a retrieval system, or trans- • While every effort has been made to
lated into any language in any form, ensure that the information in these
by any means, without Nikon’s prior manuals is accurate and complete,
written permission.
we would appreciate it were you to
• Nikon reserves the right to change bring any errors or omissions to the
the specifications of the hardware attention of the Nikon representaand software described in these tive in your area (address provided
manuals at any time and without separately).
prior notice.
Notice for Customers in Canada
CAUTION
ATTENTION
This Class B digital apparatus com- Cet appareil numérique de la classe B
plies with Canadian ICES-003.
est conforme à la norme NMB-003 du
Canada.
Notice for Customers in Europe
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT
TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
This symbol indicates that
this product is to be collected separately.

This symbol on the battery
indicates that the battery is
to be collected separately.

The following apply only to
users in European countries:
• This product is designated for separate collection at an appropriate collection point. Do not dispose of as
household waste.
• For more information, contact the
retailer or the local authorities in
charge of waste management.

The following apply only to
users in European countries:
• All batteries, whether marked with
this symbol or not, are designated
for separate collection at an appropriate collection point. Do not dispose of as household waste.
• For more information, contact the
retailer or the local authorities in
charge of waste management.

xiii

Notice for Customers in the U.S.A.
The Battery Charger

IMPORTANT SAFETY INSTRUCTIONS—SAVE THESE
INSTRUCTIONS
DANGER—TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS
For connection to a supply not in the U.S.A., use an attachment plug adapter
of the proper configuration for the power outlet if needed. This power unit
is intended to be correctly oriented in a vertical or floor mount position.
Federal Communications Commission (FCC) Radio Frequency Interference Statement
This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to Part
15 of the FCC rules. These limits are
designed to provide reasonable pro- CAUTIONS
tection against harmful interference in Modifications
a residential installation. This equip- The FCC requires the user be notified
ment generates, uses, and can radiate that any changes or modifications
radio frequency energy and, if not made to this device that are not
installed and used in accordance with expressly approved by Nikon Corpothe instructions, may cause harmful ration may void the user’s authority to
interference to radio communications. operate the equipment.
However, there is no guarantee that
interference will not occur in a particu- Interface Cables
lar installation. If this equipment does Use the interface cables sold or procause harmful interference to radio or vided by Nikon for your equipment.
television reception, which can be Using other interface cables may
determined by turning the equipment exceed the limits of Class B Part 15 of
off and on, the user is encouraged to the FCC rules.

xiv

try to correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced
radio/television technician for help.

Notice for Customers in the State of California
WARNING: Handling the cord on this
product may expose you to lead, a
chemical known to the State of California to cause birth defects or other
reproductive harm. Wash hands after
handling.
Nikon Inc., 1300 Walt Whitman Road,
Melville, New York 11747-3064, U.S.A.
Tel.: 631-547-4200

Notice Concerning Prohibition of Copying or Reproduction
Note that simply being in possession of material that has been digitally copied or reproduced by means of a scanner, digital camera, or other device may
be punishable by law.
• Items prohibited by law from being copied • Cautions on certain copies and reproductions
or reproduced
Do not copy or reproduce paper The government has issued cautions
money, coins, securities, govern- on copies or reproductions of securities
ment bonds, or local government issued by private companies (shares,
bonds, even if such copies or repro- bills, checks, gift certificates, etc.), commuter passes, or coupon tickets, except
ductions are stamped “Sample.”
when a minimum of necessary copies
The copying or reproduction of
are to be provided for business use by a
paper money, coins, or securities
company. Also, do not copy or reprowhich are circulated in a foreign
duce passports issued by the governcountry is prohibited.
ment, licenses issued by public
Unless the prior permission of the agencies and private groups, ID cards,
government has been obtained, the and tickets, such as passes and meal
copying or reproduction of unused coupons.
postage stamps or post cards issued
• Comply with copyright notices
by the government is prohibited.
The copying or reproduction of
The copying or reproduction of copyrighted creative works such as
stamps issued by the government books, music, paintings, woodcuts,
and of certified documents stipu- prints, maps, drawings, movies, and
lated by law is prohibited.
photographs is governed by
national and international copyright
laws. Do not use this product for the
purpose of making illegal copies or
to infringe copyright laws.
Disposing of Data Storage Devices
Please note that deleting images or formatting memory cards or other data
storage devices does not completely erase the original image data. Deleted
files can sometimes be recovered from discarded storage devices using commercially available software, potentially resulting in the malicious use of personal image data. Ensuring the privacy of such data is the user ’s
responsibility.
Before discarding a data storage device or transferring ownership to another
person, erase all data using commercial deletion software, or format the
device and then completely refill it with images containing no private information (for example, pictures of empty sky). Care should be taken to avoid
injury when physically destroying data storage devices.

AVC Patent Portfolio License
THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL
AND NON-COMMERCIAL USE OF A CONSUMER TO (i) ENCODE VIDEO IN COMPLIANCE WITH
THE AVC STANDARD (“AVC VIDEO”) AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED
BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS
OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS
GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE
OBTAINED FROM MPEG LA, L.L.C. SEE http://www.mpegla.com
Temperature Warnings
The camera may become warm to the touch during use; this is normal and
does not indicate a malfunction. At high ambient temperatures, after
extended periods of continuous use, or after several photographs have been
taken in quick succession, a temperature warning may be displayed, following which the camera will turn off automatically to minimize damage to its
internal circuits. Wait for the camera to cool before resuming use.
Use Only Nikon Brand Electronic Accessories
Nikon cameras are designed to the highest standards and include complex
electronic circuitry. Only Nikon brand electronic accessories (including chargers, batteries, AC adapters, and flash accessories) certified by Nikon specifically for use with this Nikon digital camera are engineered and proven to
operate within the operational and safety requirements of this electronic circuitry.
The use of non-Nikon electronic accessories could damage the
camera and may void your Nikon warranty. The use of thirdparty rechargeable Li-ion batteries not bearing the Nikon holographic seal shown at right could interfere with normal operation of the camera or result in the batteries overheating, igniting, rupturing, or leaking.
For more information about Nikon brand accessories, contact a local authorized Nikon dealer.

xvi

D Use Only Nikon Brand Accessories

Only Nikon brand accessories certified by Nikon specifically for use
with your Nikon digital camera are engineered and proven to operate
within its operational and safety requirements. THE USE OF NON-NIKON
ACCESSORIES COULD DAMAGE YOUR CAMERA AND MAY VOID YOUR NIKON WARRANTY.

A Servicing the Camera and Accessories

The camera is a precision device and requires regular servicing. Nikon
recommends that the camera be inspected by the original retailer or a
Nikon-authorized service representative once every one to two years,
and that it be serviced once every three to five years (note that fees
apply to these services). Frequent inspection and servicing are particularly recommended if the camera is used professionally. Any accessories regularly used with the camera, such as lenses or optional flash
units, should be included when the camera is inspected or serviced.

A Before Taking Important Pictures

Before taking pictures on important occasions (such as at weddings or
before taking the camera on a trip), take a test shot to ensure that the
camera is functioning normally. Nikon will not be held liable for damages or lost profits that may result from product malfunction.

A Life-Long Learning

As part of Nikon’s “Life-Long Learning” commitment to ongoing product support and education, continually-updated information is available on-line at the following sites:
• For users in the U.S.A.: http://www.nikonusa.com/
• For users in Europe and Africa: http://www.europe-nikon.com/support/
• For users in Asia, Oceania, and the Middle East: http://www.nikon-asia.com/
Visit these sites to keep up-to-date with the latest product information,
tips, answers to frequently-asked questions (FAQs), and general advice
on digital imaging and photography. Additional information may be
available from the Nikon representative in your area. For contact information, visit http://imaging.nikon.com/

xvii

xviii

sIntroduction

Package Contents
Confirm that the package contains the following items:
BS-N3000 multi accessory port
cover
BF-N1000 body cap

Nikon 1 V2 digital camera
EN-EL21
rechargeable
Li-ion battery
(with terminal cover)
UC-E19
USB cable

AN-N1000 strap
ViewNX 2/Short
Movie Creator CD

Warranty
User’s Manual

MH-28 battery
charger (AC wall
adapter supplied in
countries or regions where
required; shape depends
on country of sale)
Lens (supplied only if
lens kit is purchased with
camera; comes with front
and rear lens caps)
Reference manual
CD (contains this manual)

Memory cards are sold separately.

Parts of the Camera
Take a few moments to familiarize yourself with camera controls
and displays. You may find it helpful to bookmark this section
and refer to it as you read through the rest of the manual.

The Camera Body
18

s
7 8 9 10

6
5
4
3

12
13

2
1

6
14

15
16
17
1 Infrared receiver.........................66, 189
2 Mounting mark ...................................17
3 AF-assist illuminator ...............151, 156
Self-timer lamp ...................................65
Red-eye reduction lamp ...................69
4 Power switch........................................18
5 Shutter-release
button ....................... 26, 42, 45, 51, 60
6 Eyelet for camera strap......................12
7 Power lamp ..........................................18
8 Movie-record button ............32, 40, 50
9 Command dial........................9, 30, 152

10 Mode dial................................................ 7
11 M (flash) button................................... 69
12 Focal plane mark (E)......................152
13 Speaker
14 Microphone .......................................147
15 Lens release button..........................203
16 Lens mount ................................. 17, 152
17 Body cap .............................................171
18 Multi accessory port cover ........ 72, 76
19 Multi accessory port ................... 72, 76
20 Built-in flash......................................... 69

The Camera Body (Continued)

2 3

16
15

6
18

8
17

9
13 12

10
20
21

1 Diopter adjustment control ............... 6
2 Electronic viewfinder........................... 6
3 Eye sensor............................................... 6
4 & (feature) button ............................... 9
5 Monitor ...............................................4, 5
6 Multi selector......................................... 8
J (OK) button....................................... 8
A (AE-L/AF-L)...............129, 155, 163
E (exposure compensation)............68
M (flash mode).....................................70
C (continuous shooting/
self-timer)..................................... 63, 65
7 Memory card access lamp ......... 16, 25
8 Battery-chamber/memory card slot
cover latch........................... 14, 16, 174
9 Power connector cover
for optional power connector ......175

10 Battery-chamber/
memory card slot cover... 14, 16, 175
11 Tripod socket *
12 O (delete) button......................... 31, 87
13 $ (display) button......................... 5
14 Connector cover
15 G (menu) button ........................ 10
16 K (playback) button............30, 47, 62
17 USB connector.............................. 79, 95
18 HDMI mini-pin connector...............100
19 Connector for
external microphone......................171
20 Memory card slot................................ 14
21 Battery latch......................... 14, 16, 174

* TA-N100 tripod adapter not supported.

The Monitor
1 2 3 4 5 6 7 8 9 10 11

36
35
34
33
32
31
30
29
28

12
13
14
15
16
17
18
19
27 26 25 24 23

1 Shooting mode ..................................... 7
2 Exposure mode ................................ 122
Live image control..............................28
3 Flexible program indicator ...............34
4 Flash mode ...........................................69
5 Self-timer/remote control mode ....63
Continuous mode *.......................... 125
6 Active D-Lighting * .......................... 144
7 Picture Control * ............................... 136
8 White balance * ................................ 130
9 Movie settings (HD movies) * ........ 126
Frame rate
(slow motion movies) * ................. 125
10 Image size * ....................................... 123
11 Image quality * ................................. 123
12 Focus mode *..................................... 149
13 AF-area mode * ................................. 153
14 Face-priority *..............................27, 156
15 Focus area....................................24, 153
16 AF area brackets *............................. 149
17 Flash compensation ........................ 158
18 Exposure compensation ...................68
19 Flash-ready indicator .................. 69, 73
20 “K” (appears when memory remains
for over 1000 exposures) .................21

* Available only in detailed display (0 5).

22 21 20

21 Number of exposures remaining....21
Number of shots remaining
before memory buffer fills ..............64
White balance
recording indicator .........................133
Card warning indicator...........161, 192
22 Time available............................... 50, 54
23 ISO sensitivity ....................................135
24 ISO sensitivity indicator...................135
Auto ISO sensitivity indicator ........135
25 Aperture......................................... 36, 37
26 Shutter speed ............................... 35, 37
27 Metering .............................................128
28 Battery indicator * ...............................21
29 Silent photography * ........................125
30 HDR ......................................................145
31 GPS connection indicator * ...............78
32 Eye-Fi connection indicator * .........173
33 Autoexposure (AE)/autofocus (AF)
lock indicator...........................129, 155
34 Microphone sensitivity * .................147
35 Time elapsed................................. 50, 54
36 Recording indicator..................... 50, 54

The $ (Display) Button
Press $ to cycle through shooting
(0 4) and playback (0 81) indicators as
shown below.

$ button

❚❚ Shooting

❚❚ Playback

Simplified display

Simple photo info

Detailed display

Detailed photo info

Monitor off
(viewfinder is not
affected; 0 6)

Image only

A The Electronic Viewfinder

Use the viewfinder when bright ambient
lighting conditions make it difficult to see the
display in the monitor. The viewfinder display turns on when you put your eye to the
viewfinder and is identical to that shown on
page 4; the monitor turns off automatically.
Note that the monitor may turn off and the
viewfinder turn on if you place your finger or
other objects near the eye sensor; avoid covering the sensor when using the monitor.

Eye sensor

To focus the display, use the diopter adjustment control. When operating the control
with your eye to the viewfinder, be careful
not to put your finger or fingernails in your
eye.

A The Framing Grid

A framing grid can be displayed by selecting
On for Grid display in the setup menu
(0 162).

A See also

For information on adjusting monitor and viewfinder brightness, see
page 161.

The Mode Dial
The camera offers a choice of the following shooting modes:

Mode dial
Auto mode (0 23): Let the camera pick the settings for photographs and
movies.

Advanced movie mode (0 49): Choose the
exposure mode for HD movies or shoot
slow-motion movies.
Motion Snapshot mode (0 59): Each time the
shutter is released, the camera records a
still image and about 1.6 s of movie footage. When the resulting “Motion Snapshot” is viewed on the camera, the movie
will play back in slow motion over
approximately 4 s, followed by the still
image.
Best moment capture mode (0 41): Choose
the moment to release the shutter as the
scene plays back in slow motion (slow
view), or let the camera choose the best
shot based on composition and motion
(Smart Photo Selector).
t, u, v, and w modes (0 33): Control shutter speed and aperture for
advanced photographic effects.
• t: Programmed auto (0 34)
• v: Aperture-priority auto (0 36)
• u: Shutter-priority auto (0 35)
• w: Manual (0 37)

The Multi Selector
The multi selector and J button are used
to adjust settings and navigate the camera menus.

Multi selector
Settings: A
Lock exposure (0 129) and/or focus (0 154).
Menu navigation: 1
Move cursor up.
Select highlighted
item.
Settings: C
View continuous
shooting/self-timer
menu (0 63).

Settings: E
View exposure compensation menu
(0 68).

Menu navigation: 4
Return to previous
menu.

Menu navigation: 2
Select highlighted item
or display sub-menu.

Settings: M
View flash mode menu (0 69).
Menu navigation: 3
Move cursor down.

A The Multi Selector

Items can be highlighted by rotating the multi selector
as shown at right.

The & (Feature) Button
The & button gives access to the features
listed below. Press & to display options
for the current mode, then rotate the
command dial to highlight the desired
option and press the dial to select
(options can also be selected using the
& button
multi selector and J button).

• Live image control (C auto mode; 0 28): Adjust exposure (Brightness control), contrast (Active D-Lighting), or depth of field
(Background softening), or freeze or blur motion (Motion
control). The effects can be previewed in the monitor.
• Quick menu access (t, u, v, and w modes; 0 33): Access Metering,
White balance, ISO sensitivity, Picture Control, Focus mode,
and AF-area mode options.
• Best moment capture (u best moment capture mode; 0 43): Choose
from Slow view and Smart Photo Selector options.
• Advanced movie (v advanced movie mode; 0 52): Choose from
high-definition (HD movie) and slow-motion (Slow motion)
recording.
• Theme (z Motion Snapshot mode; 0 61): Choose from Beauty,
Waves, Relaxation, and Tenderness.
• Rating (playback mode; 0 88): Rate pictures.

The G Button
Most shooting, playback, and setup
options can be accessed from the camera
menus. To view the menus, press the
G button.

G button
Tabs
Choose from the following menus:
K Playback menu (0 109)
B Setup menu (0 159)
C t u v w u z v Shooting menu (0 119)
Menu options
Options in current menu.

Slider shows position in current
menu.

❚❚ Using the Menus
Use the multi selector (0 8) to navigate
the menus.

Multi selector

1 Select a menu.

Press 1 or 3 to highlight tabs and
press 2 to position the cursor in the
highlighted menu.

2 Select an item.

Press 1 or 3 to highlight menu items
and press 2 to view options for the
highlighted item.

3 Select an option.

Press 1 or 3 to highlight the desired
option and press J to select.

A Using the Menus

The items listed may vary with camera settings. Items displayed in gray
are not currently available (0 181). To exit the menus and return to
shooting mode, press the shutter-release button halfway (0 26).

First Steps

1 Attach the camera strap.

Attach the strap securely to the two camera eyelets.

s
2 Charge the battery.

Insert the battery into the charger q and plug the charger in
w. An exhausted battery fully charges in about two hours.
Unplug the charger and remove the battery when charging is
complete.

Battery
charging
Charging
complete

A The Plug Adapter
Depending on the country or region of
purchase, a plug adapter may be supplied with the charger. The shape of the
adapter varies with the country or region
of purchase. If a plug adapter is supplied,
raise the wall plug and connect the plug
adapter as shown at right, making sure
the plug is fully inserted. Attempting to forcibly remove the plug
adapter could damage the product.

D The Battery and Charger

Read and follow the warnings and cautions on pages x–xii and 177–
180 of this manual. Do not use the battery at ambient temperatures
below 0°C (32°F) or above 40°C (104°F); failure to observe this precaution could damage the battery or impair its performance.
Capacity may be reduced and charging times may increase at battery temperatures from 0°C (32°F) to 15°C (59°F) and from 45°C
(113°F) to 60°C (140°F); the battery will not charge if its temperature is below 0°C (32°F) or above 60°C (140°F).

Charge the battery at ambient temperatures between 5°C (41°F)
and 35°C (95°F). If the CHARGE lamp flashes quickly during charging,
cease use immediately and take battery and charger to your retailer
or a Nikon-authorized service representative.

Do not move the charger or touch the battery during charging. Failure to observe this precaution could in very rare instances result in
the charger showing that charging is complete when the battery is
only partially charged. Remove and reinsert the battery to begin
charging again.
Use the charger with compatible batteries only. Unplug when not
in use.

3 Insert the battery and a memory card.

Check to be sure the battery and card are in the correct orientation. Using the battery to keep the orange battery latch
pressed to one side, slide the battery in until it latches, and
then slide in the memory card until it clicks into place.

Front

D Inserting and Removing Batteries and Memory Cards

Always turn the camera off before inserting or removing batteries
or memory cards. Note that the battery may be hot after use;
observe due caution when removing the battery.

A Formatting Memory Cards

If this is the first time the memory card
will be used in the camera or if the card
has been formatted in another device,
select Format memory card in the setup
menu and follow the on-screen instructions to format the card (0 161). Note
that this permanently deletes any data the
card may contain. Be sure to copy any
photographs and other data you wish to
keep to a computer before proceeding.

A The Write Protect Switch

B
16G

Memory cards are equipped
with a write protect switch to
prevent accidental loss of data.
When this switch is in the “lock”
Write-protect switch
position, the memory card can
not be formatted and photos can not be deleted or recorded. To
unlock the memory card, slide the switch to the “write” position.

A Removing Batteries and Memory Cards

After turning the camera off, confirm that
the memory card access lamp (0 3) is off
and open the battery-chamber/memory
card slot cover. To remove the battery, first
release it by pressing the orange battery
latch in the direction shown by the arrow
and then remove the battery by hand.

To remove a memory card, first press the
card in to eject it (q); the card can then
be removed by hand (w).

D Memory Cards

• The camera stores pictures on SD, SDHC, and SDXC memory cards
(available separately; 0 172).
• Memory cards may be hot after use. Observe due caution when
removing memory cards from the camera.
• Do not remove memory cards from the camera, turn the camera
off, or remove or disconnect the power source during formatting
or while data are being recorded, deleted, or copied to a computer. Failure to observe these precautions could result in loss of
data or in damage to the camera or card.
• Do not touch the card terminals with your fingers or metal objects.
• Do not bend, drop, or subject to strong physical shocks.
• Do not apply force to the card casing. Failure to observe this precaution could damage the card.
• Do not expose to water, heat, high levels of humidity, or direct
sunlight.
• Do not format memory cards in a computer.

4 Attach a lens.

Be careful to prevent dust from entering the camera when the
lens or body cap is removed. The lens generally used in this
manual for illustrative purposes is a 1 NIKKOR VR 10–30 mm
f/3.5–5.6. See page 148 for information on vibration reduction (VR) and page 203 for information on removing lenses.

Mounting mark (lens)

Keeping marks aligned, position lens on
Mounting mark
camera, then rotate until it clicks into place.
(camera)
Mounting mark (lens)

A Lenses with Retractable Lens Barrel Buttons

Lenses with retractable lens barrel buttons can not be used when retracted. To
unlock and extend the lens, keep the
retractable lens barrel button pressed (q)
while rotating the zoom ring (w). The
lens can be retracted and the zoom ring
locked by pressing the retractable lens
barrel button and rotating the ring in the opposite direction. Be
careful not to press the retractable lens barrel button while attaching or removing the lens.

5 Turn the camera on.

Rotate the power switch to turn the
camera on. The power lamp will
briefly light green and the monitor will
turn on. Be sure to remove the lens
cap before shooting.

A Turning the Camera Off

To turn the camera off, rotate the power switch again. The monitor
will turn off.

A Auto Power Off

If no operations are performed for about a minute, the displays will
turn off and the power lamp start to flash (if desired, the delay
before the displays turn off automatically can be changed using the
Auto power off option in the setup menu; 0 162). The camera can
be reactivated by operating the buttons, mode dial, or other camera
controls. If no operations are performed for about three minutes
after the displays have turned off, the camera will turn off automatically.

A Attaching and Removing Lenses

Turn the camera off before attaching or removing lenses. Note that
when the camera is turned off, the sensor protection barrier in the
lens will close, protecting the camera image sensor.

A Lenses with Retractable Lens Barrel Buttons

If you are using a lens with a retractable lens barrel button (0 17),
the camera will turn on automatically when the retractable lens barrel lock is released; in addition, if the view through the lens is displayed or the monitor is off, the camera will turn off when the lens
barrel is locked (in the case of 1 NIKKOR VR 10–30mm f/3.5–5.6 and
1 NIKKOR VR 30–110mm f/3.8–5.6 lenses, firmware version 1.10 or
later is required if locking the lens barrel is to turn the camera off
when the monitor is off; for information on updating lens firmware,
visit the Nikon website for your area).

6 Choose a language and set the clock.

A language-selection dialog will be displayed the first time
the camera is turned on. Use the multi selector and J button
(0 11) to choose a language and set the camera clock. Photos can not be taken until you have set the time and date.

s
Press 1 or 3 to highlight
language and press J.

Press 4 or 2 to highlight time
zone and press J.

Press 1 or 3 to highlight date
format and press J.

Press 1 or 3 to highlight daylight
saving time option and press J.

Press 4 or 2 to select items and
press 1 or 3 to change. Press J
when finished.

Note: The camera uses a 24-hour
clock. Language and clock can be
changed at any time using
Language (0 165) and Time
zone and date (0 165) options in
setup menu.

A The Camera Clock

The camera clock is less accurate than most watches and household
clocks. Check the clock regularly against more accurate time pieces
and reset as necessary.

The camera clock is powered by an independent, rechargeable
power source, which is charged as necessary when the main battery
is installed or the camera is powered by an optional EP-5D power
connector and EH-5b AC adapter (0 174). Three days of charging
will power the clock for about a month. If a message warning that
the clock is not set is displayed when the camera is turned on, the
clock battery is exhausted and the clock has been reset. Set the
clock to the correct time and date.

7 Check the battery level and memory card capacity.
Check the battery level and number Battery level
of exposures remaining in the monitor.
❚❚ Battery Level
Display

Description
Battery fully charged or
partially discharged;
NO ICON
level shown by L or
K icon in detailed
display (0 5).
Low battery. Ready
fully-charged battery or
H
prepare to charge
battery.
Cannot take pictures. Battery exhausted;
Insert fully-charged shutter-release
battery.
disabled. Insert charged
battery.

Exposures remaining

❚❚ Number of Exposures Remaining
The monitor shows the number of pictures that can be stored
on the memory card at current settings (values over 1000 are
rounded down to the nearest hundred; e.g., values between
1200 and 1299 are shown as 1.2 k). If a warning is displayed
stating that there is not enough memory for additional
images, insert another memory card (0 14) or delete some
photos (0 87).

zAuto Mode

Shoot photographs and movies. The camera automatically
adjusts settings to suit the subject.

Taking Photos in Auto Mode

1 Select auto mode.

Rotate the mode dial to C.

z
2 Ready the camera.

Hold the camera securely with both
hands, being careful not to obstruct
the lens, AF-assist illuminator, or
microphone. Rotate the camera as
shown at lower right when taking pictures in “tall” (portrait) orientation.

Shutter speeds slow when lighting is
poor; use of the built-in flash (0 69) or
a tripod is recommended.

A Available Settings

For information on the options available in auto mode, see page 181.

3 Frame the photograph.

Position your subject in the center of
the frame.

4 Focus.

Press the shutter-release button halfway to focus. If the subject is poorly lit,
the AF-assist illuminator (0 151) may
light to assist the focus operation.
If the camera is able to focus, the selected Focus area
focus area will be highlighted in green
and a beep will sound (a beep may not
sound if the subject is moving).
If the camera is unable to focus, the focus
area will be displayed in red. See page
150.

5 Shoot.

Smoothly press the shutter-release
button the rest of the way down to
release the shutter and record the
photograph. The memory card access
lamp will light and the photograph
will be displayed in the monitor for a
few seconds (the photo will automatically clear from the display when the
shutter-release button is pressed halfway). Do not eject the memory card or
remove or disconnect the power source
until the lamp has gone out and recording is complete.

Memory card access
lamp

A Taking Several Photographs in Succession

If Off is selected for Image review in the playback menu (0 112), you
can take additional photographs without refocusing by keeping the
shutter-release button pressed halfway between shots.

A The Shutter-Release Button

The camera has a two-stage shutter-release button. The camera
focuses when the shutter-release button is pressed halfway. To take the
photograph, press the shutter-release button the rest of the way down.

Focus: Press halfway

Shoot: Press the rest
of the way down

A Automatic Scene Selection
In auto mode, the camera automatically ana- Scene icon
lyzes the subject and selects the appropriate
scene. The selected scene is shown in the
monitor.

c Portrait: Human portrait subjects.
d Landscape: Landscapes and cityscapes.
f Night portrait: Portrait subjects framed against dark backgrounds.
e Close up: Subjects close to the camera.
g Night landscape: Poorly-lit landscapes and cityscapes.
Z Auto: Subjects that do not fall into the categories listed above.

A Using a Zoom Lens

Use the zoom ring to zoom in on the subject so that it fills a larger area
of the frame, or zoom out to increase the area visible in the final photograph (select longer focal lengths on the lens focal length scale to
zoom in, shorter focal lengths to zoom out).
Zoom in

Zoom out

Zoom ring
If you are using an optional lens with a power
drive zoom switch, select T to zoom in and W
to zoom out. The speed with which the camera zooms in and out varies with how far you
slide the switch. The zoom position is shown
by the zoom guide in the display.
Zoom guide

A Face Priority

The camera detects and focuses on portrait
subjects (face priority). A double yellow border will be displayed if a portrait subject is
detected facing the camera (if multiple faces,
up to a maximum of five, are detected, the
camera will select the closest subject). Press
the shutter-release button halfway to focus
on the subject in the double yellow border. The border will clear from
the display if the camera can no longer detect the subject (because, for
example, the subject has looked away).

❚❚ Live Image Control
Live image controls let you preview how
changes to each control will affect the
final photograph. To choose a live image
control for auto mode, press & and use
the command dial. Rotate the dial to
highlight an item and press the dial to
& button
view the effect.

Rotate the command dial to adjust the
selected item. To hide live image controls, press & again.

Command dial

Active D-Lighting: Preserve details in highlights and shadows for natural contrast.

Increase effect

Active D-Lighting: High Active D-Lighting: Low

Reduce effect

Background softening: Soften background
details to make your subject stand out, or
bring both background and foreground
into focus.

Sharpen background

Soften background
Background sharp

Background softened

Motion control: Suggest motion by blurring
moving objects, or “freeze” motion to
capture moving objects clearly.

Freeze motion

Blur motion
Freeze motion

Blur motion

Brightness control: Make pictures brighter
or darker.

Brighter

Darker

Brighter

Darker

D Live Image Control

When live image control is in effect, the built-in flash and optional flash
units can not be used and only one picture will be taken each time the
shutter-release button is pressed all the way down, even if I is
selected in the continuous/self-timer menu.

Viewing Photographs
Press K to display your most recent photograph full frame in the monitor (fullframe playback).

K button

z
Press 4 or 2 or rotate the multi selector
to view additional pictures.

To zoom in on the center of the current
image, rotate the command dial to the
right (0 86). Rotate left to zoom out. To
view multiple images, rotate the command dial left when the picture is displayed full frame (0 84).

Command dial

To end playback and return to shooting mode, press the shutterrelease button halfway.

A See Also

For information on toggling photo info on or off, see page 81. See page
89 for information on slide shows.

Deleting Pictures
To delete the current picture, press O. Note that once deleted, pictures can not be recovered.

1 Display the photograph.

Display the photograph you wish to delete as described on
the preceding page.

2 Press O.

A confirmation dialog will be displayed.

O button

3 Delete the photograph.

Press O again to delete the picture and
return to playback, or press K to exit
without deleting the picture.

A Deleting Multiple Pictures

The Delete option in the playback menu (0 87) can be used to delete
selected pictures, all pictures, or pictures taken on selected dates.

Recording Movies in Auto Mode
In auto mode, the movie-record button
can be used to shoot movies with sound
at an aspect ratio of 16 : 9 (the movie
crop is shown in the display). Press the
movie-record button to start and stop
recording.
Movie-record button

A Taking Photographs During Recording

Photographs can be taken at any time during recording by pressing the shutterrelease button all the way down. Movie
recording is not interrupted.

A See Also

See page 56 for information on viewing
movies.

#t, u, v, and w Modes
t, u, v, and w modes offer varying
degrees of control over shutter speed
and aperture. Choose a mode and adjust
settings according to your creative intent.

❚❚ Adjusting Settings
In t, u, v, and w modes, the settings below can be accessed
directly from the shooting display. Press the & button and rotate
the command dial to highlight a setting and press the dial to
select.
Picture Control (0 136)

White balance (0 130)
Focus mode (0 149)

Metering (0 128)
ISO sensitivity (0 135)

AF-area mode (0 153)

Once selected, the setting can be
changed by rotating the command dial.
Press the dial again to save changes and
exit to shooting mode.

A Available Settings

For information on the options available in t, u, v, and w modes, see
page 181.

Taking Photos in t, u, v, and w Modes
t Programmed Auto
In this mode, the camera automatically adjusts shutter speed
and aperture for optimal exposure in most situations. This mode
is recommended for snapshots and other situations in which
you want to leave the camera in charge of shutter speed and
aperture.

❚❚ Choosing a Combination of Shutter Speed and Aperture
Although the shutter speed and aperture
chosen by the camera will produce optimal results, you can also choose from
other combinations that will produce the
same exposure (“flexible program”).
Rotate the command dial right for large
Command dial
apertures (low f-numbers) that blur background details or fast shutter speeds that
“freeze” motion. Rotate the dial left for
small apertures (high f-numbers) that
increase depth of field or slow shutter
speeds that blur motion. U is displayed
while flexible program is in effect.

A Restoring Default Shutter Speed and Aperture Settings

To restore default shutter speed and aperture settings, rotate the command dial until U is no longer displayed, choose another mode, rotate
the mode dial, or turn the camera off. The default shutter speed and
aperture is automatically restored when the camera enters standby
mode.

u Shutter-Priority Auto
In shutter-priority auto, you choose the shutter speed while the
camera automatically selects the aperture that will produce the
optimal exposure. Use slow shutter speeds to suggest motion by
blurring moving subjects, fast shutter speeds to “freeze” motion.

Fast shutter speed (1/1600 s)

Slow shutter speed (1 s)

❚❚ Choosing a Shutter Speed
Rotate the command dial right for faster
shutter speeds, left for slower shutter
speeds. Choose from values between
30 s and 1/4000 s. The electronic shutter,
which can be enabled either by selecting
On for Silent photography (0 125) or
by choosing a frame rate of 15, 30, or
60 fps (0 125) in continuous shooting
mode (0 63), supports shutter speeds as
fast as 1/16,000 s; the slowest shutter speed
available with the electronic shutter is
30 s (silent photography) or 1/60 s (15, 30,
and 60 fps continuous).

Command dial

A Continuous Shooting

The selected shutter speed may change
when continuous shooting (0 63) is in effect.

v Aperture-Priority Auto
In aperture-priority auto, you choose the aperture while the
camera automatically selects the shutter speed that will produce
the optimal exposure. Large apertures (low f-numbers) reduce
depth of field, blurring objects behind and in front of the main
subject. Small apertures (high f-numbers) increase depth of
field, bringing out details in the background and foreground.
Short field depths are generally used in portraits to blur background details, long field depths in landscape photographs to
bring the foreground and background into focus.

#
Large aperture (f/5.6)

Small aperture (f/16)

❚❚ Choosing an Aperture
Rotate the command dial right for
smaller apertures (higher f-numbers), left
for larger apertures (lower f-numbers).
The minimum and maximum values
depend on the lens currently in use.
Command dial

w Manual
In manual exposure mode, you control both shutter speed and
aperture.
❚❚ Choosing Shutter Speed and Aperture
Adjust shutter speed and aperture with
reference to the exposure indicator (see
below). Shutter speed is set by rotating
the command dial right for faster speeds
and left for slower speeds: choose from
values between 30 s and 1/4000 s (30 s and
Command dial
1/16,000 s when the electronic shutter is
enabled by selecting On for Silent photography, or 1/60 s and 1/16,000 s when the
electronic shutter is enabled by selecting
a frame rate of 15, 30, or 60 fps in continuous shooting mode; 0 63, 125), or
select “Bulb” or “Time” to hold the shutter
open indefinitely for a long time-exposure. Aperture is selected by rotating the
multi selector clockwise for smaller apertures (higher f-numbers) and counterclockwise for larger apertures (lower f-numbers): choose from
values between the minimum and maximum for the lens.

A Continuous Shooting

The selected shutter speed may change when continuous shooting
(0 63) is in effect.

A The Exposure Indicator

When shutter speeds other than “Bulb” or “Time” are selected, the
exposure indicator shows whether the photograph would be under- or
over-exposed at current settings.
Optimal exposure

Underexposed by 1/3 EV

Overexposed by over 2 EV

❚❚ Long Time-Exposures (Manual Exposure Mode Only)
Select the following shutter speeds for
long time-exposures of moving lights,
the stars, night scenery, or fireworks.
• Bulb: The shutter remains open while
the shutter-release button is held down.
To prevent blur, use a tripod.
• Time: Requires an optional ML-L3
remote control (0 170). Start the exposure by pressing the ML-L3 shutterrelease button. The shutter remains
open until the button is pressed a second time.

1 Ready the camera.

Mount the camera on a tripod or place it on a stable, level surface. To prevent loss of power before the exposure is complete, use a fully charged EN-EL21 battery or an optional
EH-5b AC adapter and EP-5D power connector. Note that
noise (bright spots, randomly-spaced bright pixels, or fog)
may be present in long exposures; before shooting, choose
On for Long exposure NR in the shooting menu (0 146).

2 Choose a shutter speed.

Select mode w and choose a shutter
speed as follows:
• Bulb: Rotate the command dial left
until “Bulb” is selected for shutter
speed.
• Time: Rotate the command dial left
until “Bulb” is selected for shutter
speed, and then select # (remote
control mode) for Continuous/selftimer (0 63).

Command dial

#
3 Open the shutter.

Bulb: After focusing, press the shutter-release button all the
way down. Keep the shutter-release button pressed until the
exposure is complete.
Time: Press the ML-L3 shutter-release button all the way down.
The shutter will open immediately or after a two-second
delay.

4 Close the shutter.

Bulb: Take your finger off the shutter-release button.
Time: Press the ML-L3 shutter-release button all the way down.

Shooting ends automatically after two minutes. Note that some
time may be required to record long exposures.

Recording Movies in t, u, v, and w Modes

In t, u, v, and w modes, the movierecord button can be used to shoot
movies with sound at an aspect ratio of
16 : 9 (the corners of the movie crop are
shown in the display). Press the movierecord button to start and stop recording. Note that regardless of the mode
selected, movies are recorded using
programmed auto exposure; to adjust
exposure when shooting movies, select
advanced movie mode (0 49).

A Taking Photographs During Recording

Movie-record button

Photographs can be taken at any time during recording by pressing the
shutter-release button all the way down. Movie recording is not interrupted.

A See Also

See page 56 for information on viewing movies.

bBest Moment Capture Mode

This mode is ideal for fast-changing, hard-to-capture subjects.
Choose when to release the shutter as the scene plays back in
slow motion (slow view), or let the camera choose the best shot
based on composition and motion (Smart Photo Selector).

Slow View
In this mode, the camera captures a short sequence of still
images and plays them back in slow motion so that you can
choose the precise moment for a photograph. While the shutterrelease button is pressed halfway, the camera records up to 40
frames over about 1.3 s and plays them back in a continuous
slow-motion loop. When the frame you want to keep is displayed, press the shutter-release button the rest of the way
down to record the current frame and discard the remaining
images.

1 Select u mode.

Rotate the mode dial to u.

A Available Settings

For information on the options available in best moment capture
mode, see page 181.

2 Frame the photograph.

Compose the photograph with your
subject in the center of the frame.

3 Press the shutter-release button halfway.
The camera will focus (0 24) and then,
over a span of about 1.3 s, record 40
frames to a temporary memory buffer.

4 View the buffer contents.

Keep the shutter-release button Progress indicator
pressed halfway to play the frames in
the buffer back in a continuous loop
about 6 s long. The position of the current frame is shown by a progress indicator.

A The Capture Illuminator

The optional SB-N5 flash unit is equipped with a capture illuminator
which lights during buffering (0 74).

5 Record the desired frame.

Press the shutter-release button all
the way down to record the current
frame and discard the remaining
images. To exit without recording a
photograph, release the button without pressing it all the way down.

❚❚ Choosing a Capture Mode
Pressing the & button in best moment
capture mode displays the following
options. Rotate the command dial to
highlight the desired capture mode and
press the dial to select.
• Slow view: Take pictures in slow view
& button
mode (0 41).
• Smart Photo Selector: Take pictures using
the Smart Photo Selector (0 44).

Smart Photo Selector
Choose Smart Photo Selector mode to let the camera help you
take photos that capture a fleeting expression on the face of a
portrait subject or other hard-to-time shots such as group photos in party scenes. Each time the shutter is released, the camera
automatically selects the best shot and a number of best shot
candidates based on composition and motion.

b
1 Select u mode.

Rotate the mode dial to u.

2 Select Smart Photo Selector mode.

Press &, then rotate the command dial
to highlight Smart Photo Selector
and press the dial to select.

& button

3 Frame the photograph.

Compose the photograph with your
subject in the center of the frame.

4 Begin buffering photographs.

Press the shutter-release button halfway to focus (0 24). An icon will be
displayed as the camera begins
recording images to the memory
buffer. The camera continuously
adjusts focus to account for changes
in the distance to the subject while
the shutter-release button is pressed
halfway.

A Buffering

Buffering begins when the shutter-release button is pressed halfway
and ends after about 90 seconds or when the shutter-release button is
pressed all the way down.
Shutter-release
button pressed
halfway to focus

Shutter-release button
pressed all the way
down

Shooting ends

Buffering
The optional SB-N5 flash unit is equipped with a capture illuminator
which lights during buffering (0 74). Buffering ends automatically and
the capture illuminator turns off after shooting or if the shutter-release
button is kept pressed halfway for about six seconds.

5 Shoot.

Smoothly press the shutter-release
button the rest of the way down. The
camera will compare shots recorded
to the buffer both before and after the
shutter-release button was pressed all
the way down, and select five to copy
to the memory card. Note that some
time may be required. The best picture is displayed in the monitor when
recording is complete.

D Smart Photo Selector Files

Do not delete the “NCSPSLST.LST” file from the “NCFL” folder on the
memory card or change the file names of images taken with the Smart
Photo Selector. The camera will no longer recognize the affected files
as Smart Photo Selector images and will instead handle them as independent photographs.

A See Also

Use the Number of shots saved option in the shooting menu to
choose the number of shots selected by the Smart Photo Selector
(0 125).

Viewing Photos Taken with the Smart Photo Selector
Press K and use the multi selector to
display photographs taken with the
Smart Photo Selector (0 30; pictures
taken with the Smart Photo Selector are
indicated by a y icon). Of the photographs recorded by the Smart Photo
Selector, only the best shot will be dis- K button
played (when you press the multi selector right to view the next picture, the
camera will skip over the best shot candidates, with the result that the next picture displayed will not have a file
number that immediately follows that of
the current picture). To end playback
and return to shooting mode, press the
shutter-release button halfway.

Choosing the Best Shot
When a photograph taken with the
Smart Photo Selector is displayed, you
can choose the best shot by pressing J.
Press 4 or 2 to view the other pictures
in the sequence and press J to select
the current picture as the best shot. To
return to normal playback, press D.

Deleting Pictures
Pressing O when a picture taken with the
Smart Photo Selector is selected displays
a confirmation dialog; press O again to
delete the best shot and the best shot
candidates, or press K to exit without
deleting the pictures. Note that once
O button
deleted, pictures can not be recovered.

A Deleting Individual Photographs

Pressing the O button in the best shot selection dialog displays the following options;
highlight an option using the multi selector
and press J to select.
• This image: Delete the current photo (note
that the picture currently selected as the
best shot can not be deleted).
• All except best shot: Delete the best shot candidates, but not picture currently selected as the best shot.
A confirmation dialog will be displayed; to delete the selected image or
images, highlight Yes and press J.

A Best Moment Capture Mode

The camera automatically chooses a scene mode appropriate to the
subject. Movies can not be recorded, and pressing the movie-record
button has no effect. The flash can not be used.

yAdvanced Movie Mode

Choose this mode to film slow-motion movies or to shoot highdefinition (HD) movies in mode t, u, v, or w.

HD Movies
Record movies with sound at an aspect ratio of 16 : 9.

1 Select advanced movie mode.

Rotate the mode dial to v. An HD
movie crop with an aspect ratio of
16 : 9 will appear in the display.

2 Frame the opening shot.

Frame the opening shot with your
subject in the center of the display.

A Available Settings

For information on the options available in advanced movie mode, see
page 183.

D The 0 Icon

A 0 icon indicates that movies can not be recorded.

A See Also

For information on choosing an exposure mode, see page 122. Frame
size and frame rate options are described on page 126.

3 Start recording.

Press the movie-record button to
begin recording. A recording indicator, the time elapsed, and the time
available are displayed while recording is in progress.

A Audio Recording

Movie-record button
Be careful not to cover the microphone
and note that the built-in microphone Recording indicator/
may record sounds made by the camera Time elapsed
or lens. By default, the camera focuses
continuously; to avoid recording focus
noise, select a focus mode of AF-S (0 149).
The Movie sound options item in the
shooting menu offers sensitivity and wind
noise options for both built-in and external microphones (0 147).
Time available

4 End recording.

Press the movie-record button again
to end recording. Recording will end
automatically when the maximum
length is reached (0 126), the memory card is full, another mode is
selected, the lens is removed, or the
camera becomes hot (0 xvi).

Movie-record button

A Maximum Length

At default settings, HD movies can be up to 4 GB in size and 20 minutes in length (for more information, see page 126); note that
depending on memory card write speed, shooting may end before
this length is reached (0 172).

A Focus and Exposure Lock

Focus and exposure will lock while the A (multi selector up) button is
pressed (0 129, 154).

❚❚ Taking Photographs During HD Movie Recording
Press the shutter-release button all the
way down to take a photograph without
interrupting HD movie recording. Photographs taken during movie recording
have an aspect ratio of 3 : 2.

A Taking Photographs During Movie Recording

Up to 20 photographs can be taken with each movie shot. Please note
that photographs can not be taken with slow-motion movies.

❚❚ Choosing the Movie Type
To choose between high definition and
slow motion recording, press &, then
rotate the command dial to highlight one
of the following options and press the
dial to select:
• HD movie: Record movies in HD (0 49).
• Slow motion: Record slow-motion movies & button
(0 53).

D Recording Movies

Flicker, banding, or distortion may be visible in the displays and in the
final movie under fluorescent, mercury vapor, or sodium lamps or if the
camera is panned horizontally or an object moves at high speed
through frame (flicker and banding can be reduced in HD movies by
choosing a Flicker reduction option that matches the frequency of the
local AC power supply, but note that the slowest shutter speed available is 1/100 s at 50 Hz, 1/60 s at 60 Hz; 0 164). Bright light sources may
leave after-images when the camera is panned. Jagged edges, color
fringing, moiré, and bright spots may also appear. When recording
movies, avoid pointing the camera at the sun or other strong light
sources. Failure to observe this precaution could result in damage to
the camera’s internal circuitry.

Slow Motion
Record silent movies with an aspect ratio of 8 : 3. Movies are
recorded at 400 fps and play back at 30 fps.

1 Select advanced movie mode.
Rotate the mode dial to v.

2 Select slow-motion mode.

Press the & button, then rotate the
command dial to highlight Slow
motion and press the dial to select. A
slow-motion movie crop with an
aspect ratio of 8 : 3 will appear in the
display.

y
& button

3 Frame the opening shot.

Frame the opening shot with your
subject in the center of the display.

4 Focus.

Focus area

5 Start recording.

Press the movie-record button to
begin recording. A recording indicator, the time elapsed, and the time
available are displayed while recording is in progress. The camera focuses
on the subject at the center of the display; face detection (0 27) is not Movie-record button
available and focus and exposure can Recording indicator/
not be adjusted.
Time elapsed

Time available

6 End recording.

Press the movie-record button again
to end recording. Recording will end
automatically when the maximum
length is reached, the memory card is
full, another mode is selected, the lens
is removed, or the camera becomes
hot (0 xvi).

Movie-record button

A Maximum Length

Up to 3 seconds or 4 GB of footage can be recorded; note that
depending on memory card write speed, shooting may end before
this length is reached (0 172).

A See Also

Frame rate options are described on page 126.

Viewing Movies
Movies are indicated by a 1 icon in full-frame playback (0 30).
Press J to start playback.
Movie playback indicator/
Current position/total length

1 icon/Length

Guide

Volume

The following operations can be performed:
To

Use

Description

Pause
Play

Pause playback.
J

/
Advance/
rewind

Adjust
volume
Return to
full-frame
playback

Resume playback when the movie is paused
or during rewind/advance.
Press 4 to rewind, 2 to advance. Speed
increases with each press, from 2× to 4× to 8×
to 16×. If playback is paused, the movie
rewinds or advances one frame at a time; keep
the button pressed for continuous rewind or
advance. You can also rotate the multi selector
to rewind or advance when playback is
paused.
Rotate the command dial to adjust volume.

/K Press 1 or K to exit to full-frame playback.

Deleting Movies
To delete the current movie, press O. A
confirmation dialog will be displayed;
press O again to delete the movie and
return to playback, or press K to exit
without deleting the movie. Note that
once deleted, movies can not be recovered.

A See Also

O button

See page 116 for information on trimming
unwanted footage from movies.

9Motion Snapshot Mode

Record brief movie vignettes with your photographs. Each time
the shutter is released, the camera records a still image and
about 1.6 s of movie footage. When the resulting “Motion Snapshot” is viewed on the camera, the movie will play back in slow
motion over approximately 4 s, followed by the still image; playback is accompanied by a background track about 10 s long.

Shooting in Motion Snapshot Mode

1 Select Motion Snapshot mode.

Rotate the mode dial to z.

2 Frame the picture.

Compose the photograph with your
subject in the center of the frame.

A Available Settings

For information on the options available in Motion Snapshot mode, see
page 0 183.

3 Begin buffering.

Press the shutter-release button halfway to focus (0 24). An icon will be
displayed as the camera begins
recording footage to the memory
buffer.

4 Shoot.

Smoothly press the shutter-release
button the rest of the way down. The
camera will record a photograph,
together with about 1.6 s of movie
footage beginning before and ending
after the time the shutter-release button was pressed all the way down.
Note that some time may be required.
When recording is complete, the photograph will be displayed for a few
seconds.

A Buffering

Shutter-release button
pressed all the way
down
Buffering

Shooting ends

❚❚ Choosing a Theme
To choose the background music for the
movie, press & and use the command
dial to select from Beauty, Waves, Relaxation, and Tenderness. Rotate the command dial to highlight an option and
press the dial to select.

& button

To play the background music for the
highlighted theme, press the $ button and use the command dial to adjust
volume.
$ button

A Motion Snapshot Mode

Live audio is not recorded. Movies can not be recorded using the
movie-record button and the flash can not be used.
The optional SB-N5 flash unit is equipped with a capture illuminator
which lights during buffering (0 74). Buffering ends automatically and
the capture illuminator turns off after shooting or if the shutter-release
button is kept pressed halfway for about six seconds.

A See Also

See page 127 for information on choosing what portions of the buffer
are included in the movie footage. For information on saving Motion
Snapshots in a format that can be viewed in most movie playback software, see page 128.

Viewing Motion Snapshots
Press K and use the multi selector to display a Motion Snapshot (0 30; Motion
Snapshots are indicated by a z icon).
Pressing J when a Motion Snapshot is
displayed plays back the movie portion in
slow motion over a period of about 4 s,
followed by the photo; the background K button
track plays for about 10 s (to choose a
new background track, use the Change
theme option in the playback menu;
0 117). To end playback and return to
shooting mode, press the shutter-release
button halfway.

Deleting Motion Snapshots

To delete the current Motion Snapshot,
press O. A confirmation dialog will be displayed; press O again to delete the photo
and movie and return to playback, or
press K to exit without deleting the file.
Note that once deleted, Motion Snapshots
O button
can not be recovered.

tMore on Photography

Single-Frame, Continuous, Self-Timer, and Remote
Control Modes
Pressing 4 (C) on the multi selector displays a choice of shutterrelease modes for still photography:
8 Single frame: The camera takes pictures one at a time.
Continuous: The camera takes photographs while the shutter-release
I button is pressed. The rate can be selected using the Continuous
option in the shooting menu (0 125).
E Self-timer: Delayed shutter release (0 65).
# Remote control: The shutter is using a remote control (0 65).

Continuous Mode
To take pictures in continuous mode:

1 Display release mode options.

Press 4 (C) to display release mode
options.

2 Select I.

Highlight I and press J.

3 Compose the shot and start shooting.
The camera takes pictures while the
shutter-release button is held all the
way down.

D Continuous Mode

The Continuous option in the shooting menu offers a choice of 5, 15,
30, and 60 fps (0 125). Frame rates of 15, 30, and 60 fps use an electronic shutter; except when On is selected for Silent photography
(0 125), a mechanical shutter is used at a frame rate of 5 fps. The builtin flash can be used when 5 fps is selected, but only one picture will be
taken each time the shutter-release button is pressed; at settings of 15,
30, and 60 fps, the built-in flash will not fire. At 15 fps, the maximum
number of shots that can be taken in a single burst is about 45, while at
30 and 60 fps the maximum is about 40. For more information, see
page 186.
While photographs are being recorded to the memory card, the memory card access lamp will light. Depending on shooting conditions and
memory card write speed, recording may take up to about a minute. If
the battery is exhausted before all photographs are recorded, the shutter release will be disabled and the remaining images transferred to the
memory card.
Continuous shooting is not available in best moment capture,
advanced movie, or Motion Snapshot mode, when live image control is
used in auto mode (0 28), or when On is selected for HDR in the shooting menu (0 145).

A Buffer Size

The camera is equipped with a memory
buffer for temporary storage, allowing
shooting to continue while photographs are
being saved to the memory card. Up to 100
photographs can be taken in succession;
note, however, that the frame rate will drop
or shooting will pause when the buffer is full.
The approximate number of images that can be stored in the memory
buffer at current settings is displayed while the shutter-release button
is pressed halfway (this number is an approximation only and varies
with shooting conditions). The illustration shows the display when
space remains in the buffer for about 35 pictures.

Self-Timer and Remote Control Modes
The self-timer and optional ML-L3 remote control (0 170) can be
used to reduce camera shake or for self-portraits.

A Before Using the ML-L3 Remote Control

Before using the remote control for the first time, remove the clear plastic battery-insulator sheet.

1 Display release mode options.

Press 4 (C) to display release mode
options.

2 Select the desired option.

Use the multi selector to highlight the
desired option and press J.

3 Mount the camera on a tripod.

Mount the camera on a tripod or place the camera on a stable, level surface.

4 Frame the photograph and shoot.

Self-timer mode: Press the shutterrelease button halfway to focus, and
then press the button the rest of the
way down. The self-timer lamp will
start to flash and a beep will begin to
sound. Two seconds before the photo
is taken, the lamp will stop flashing
and the beeping will become more
rapid.

Remote control mode: From a distance of
5 m (16 ft) or less, aim the ML-L3 at the
infrared receiver on the front of the
camera (0 2) and press the ML-L3
shutter-release button. If 2 s delay is
selected for Remote control in the
setup menu (0 163), the self-timer lamp will light for about
two seconds before the shutter is released. If Quick response
is selected, the self-timer lamp will flash after the shutter has
been released.
Note that the timer may not start or a photograph may not be
taken if the camera is unable to focus or in other situations in
which the shutter can not be released. Turning the camera off
cancels self-timer and remote control modes. Remote control
mode is cancelled automatically if no operations are performed
for about ten minutes after the mode is selected in Step 2.

A Movie Mode

In self-timer mode, start and stop the timer by pressing the movierecord button instead of the shutter-release button. In remote control
mode, the ML-L3 shutter-release button functions as the movie-record
button for advanced movie mode (0 49).

A Using a Flash

When using the built-in flash, press the N button to raise the flash
before shooting. Shooting will be interrupted if the flash is raised while
the self-timer or delayed-remote timer is counting down.
In remote control mode, the flash starts charging while the camera is
waiting for the signal from the remote. The camera will only respond to
the shutter-release button on the remote control when the flash is
charged. If red-eye reduction (0 69) is used when Quick response is
selected for Remote control in the setup menu (0 163), the shutter
will be released about 1 second after the red-eye reduction lamp lights.
If 2 s delay is selected, there will be about a 2 second delay after the
shutter-release button on the remote control is pressed; the red-eye
reduction lamp will then light for about 1 second before the shutter is
released.

A See Also

For information on choosing how long the camera will wait for a signal
from the remote, see page 163. See page162 for information on choosing the shutter-release delay in self-timer mode.

Exposure Compensation
Exposure compensation is used to alter exposure from the value
suggested by the camera, making pictures brighter or darker.

–1 EV

No compensation

+1 EV

1 Display exposure compensation options.
Press 2 (E) to display exposure compensation options.

2 Choose a value.

Use the multi selector to choose from
values between –3 EV (underexposure) and +3 EV (overexposure) in
increments of 1/3 EV. In general, positive values make the image brighter
while negative values make it darker.

Normal exposure can be restored by setting exposure compensation to ±0. Except in auto mode, exposure compensation is
not reset when the camera is turned off.

A Exposure Compensation

Exposure compensation is most effective when used with centerweighted or spot metering (0 128).

A Using a Flash

When used with a flash, exposure compensation affects both background exposure and flash level.

The Built-in Flash
To use the flash, raise it by pressing the N
button. Charging begins when the flash
is raised; once charging is complete, a
flash-ready indicator (N) will be displayed
when the shutter-release button is
pressed halfway. The following flash
modes are available; choose a flash mode
as described on the following page.
N

NYp

Np
Nr

N button

Fill flash: The flash fires with every shot. Use when the subject is
poorly lit or with back-lit subjects to “fill in” (illuminate) shadows.
Red-eye reduction: The red-eye reduction lamp lights before the
flash fires, reducing “red-eye” caused by light reflecting from
your subject's retinas.
Red-eye reduction + slow sync: Combines red-eye reduction with
slow shutter speeds to capture background details at night or
under low light. Use for portraits taken against a backdrop of
night scenery.
Fill flash + slow sync: Combines fill flash with slow shutter speeds
to capture details of poorly-lit backgrounds.
Rear curtain + slow sync: Combines rear-curtain sync (see below)
with slow shutter speeds to capture poorly-lit background
details.
Rear-curtain sync: While in other modes the flash fires as the shutter opens, in rear-curtain sync the flash fires just before the
shutter closes, creating streams of light that appear to follow
moving light sources.

A Lowering the Built-in Flash

To save power when the flash is not in use,
press it gently downward until the latch
clicks into place. Do not use force. Failure to
observe this precaution could result in product malfunction.

Choosing a Flash Mode

1 Display the flash mode options.

Press 3 (N) to display a list of flash
modes. The modes available vary with
the shooting mode (0 7).
N
NY

Auto mode
Fill flash
Red-eye reduction

N
NY
Nq

u, w
Fill flash
Red-eye reduction
Rear-curtain sync

2 Select a flash mode.

t, v
Fill flash
Red-eye reduction
Red-eye reduction +
NYp
slow sync
Np Fill flash + slow sync
Nr Rear curtain + slow sync
N
NY

Use the multi selector to highlight a
flash mode (0 69) and press J to
select.

A Using the Built-in Flash

The built-in flash can be used in auto and t, u, v, and w modes only;
note, however, that the flash can not be used with live image control
(0 28) and will not fire when On is selected for HDR in the shooting
menu (0 145), or in I mode (0 63) when a frame rate of 15, 30, or
60 fps is selected for Continuous in the shooting menu (0 125). If the
flash is fired multiple times in quick succession, the flash and shutter
may be temporarily disabled to protect the flash. Shooting can be
resumed after a brief pause.
Objects close to the camera may be overexposed in photographs taken
with the flash at high ISO sensitivities.
To avoid vignetting, remove lens hoods and shoot at ranges of at least
0.6 m (2 ft). Some lenses may cause vignetting at greater distances or
obstruct the red-eye reduction lamp, interfering with red-eye reduction. The following illustrations show the effect of vignetting caused by
shadows cast by the lens when the built-in flash is used.

Shadow

A Aperture, Sensitivity, and Flash Range

Flash range varies with sensitivity (ISO equivalency) and aperture. With
the standard zoom lens at maximum aperture and ISO sensitivity set to
ISO 160 to 6400, the range is approximately 0.6 m–7.0 m (2 ft–23 ft)
when the lens is zoomed all the way out, 0.6 m–4.2 m (2 ft–13.8 ft) at
maximum zoom.

A See Also

See page 157 for information on flash control, or page 158 for information on adjusting flash level.

Optional Flash Units
In still image mode, optional flash units for Nikon 1 cameras can
be used for lighting effects such as bounce-flash photography
or, when an optional SB-N5 flash unit is attached, to provide capture illumination in best moment capture and Motion Snapshot
modes. The built-in flash does not fire when an optional flash
unit is attached.
In the instructions that follow, the optional SB-N5 flash unit is
used for illustrative purposes.

Attaching Flash Units
Mount optional flash units on the camera multi accessory port.

1 Remove the multi accessory port cover.
Remove the cover as shown at right.
Keep the cover in a safe place and
replace it when the port is not in use.

t 2 Attach the flash unit.

Turn the camera off and mount the
flash unit on the multi accessory port
as described in the manual provided
with the flash unit.

A Supported Flash Units

The camera supports only flash units designated for use with Nikon 1
cameras.

Taking Pictures
Follow the steps below to take pictures with the flash.

1 Turn the camera and flash unit on.

2 Choose a flash mode.

Choose a flash mode as described on page 70.

3 Position the flash head.

Rotate the flash head so that it points
directly ahead.

4 Take pictures.

Before shooting, confirm that the flash
status indicator on the rear of the flash
unit is lit and that the flash-ready indicator (N) appears in the camera display. To take pictures without the
flash, turn the flash unit off.

Flash status indicator

Capture-illuminator
status indicator

A See Also

See page 157 for information on flash control, or page 158 for information on adjusting flash level.

❚❚ Bounce Lighting
Light from the flash can be “bounced” (reflected) from a ceiling
or wall, diffusing the light from the flash to make shadows less
harsh and reduce glare from hair, skin, clothing and foreground
objects.

Flash head rotated upward 90 °
(bounce lighting)

Flash pointed directly ahead
(normal lighting)

A Bounce Lighting

If possible, bounce flash lighting from a reflective white or near-white
surface; light reflected from other surfaces may change the colors in
the photograph. If no suitable surface can be found nearby, a piece of
white paper (A4 or letter sized) can be used instead, but be sure to
check the results in the camera display.

A The Capture Illuminator

The optional SB-N5 flash unit offers a capture
illuminator that lights to illuminate subjects
in best moment capture and Motion Snapshot modes (0 41, 59). In Smart Photo Selector and Motion Snapshot modes, the
illuminator will light for about 6 seconds during buffering, illuminating subjects about
1 m (3.3 ft) from the camera. In slow view, the illuminator will light for
about 1.3 seconds, starting when the shutter-release button is pressed
halfway. Before shooting, confirm that the capture-illuminator status
indicator is lit. The indicator lights during buffering.

A Optional Flash Units

Detailed instructions may be found in the manual provided with the
flash unit. Optional flash units can be used in auto and t, u, v, and w
modes only; note, however, that the flash can not be used with live
image control (0 28) and will not fire when On is selected for HDR in
the shooting menu (0 145), or in I mode (0 63) when a frame rate of
15, 30, or 60 fps is selected for Continuous in the shooting menu
(0 125).

A The Flash/Capture-Illuminator Status Indicators

If the flash status or capture-illuminator status indicator on the rear of
the SB-N5 flashes, one of the following errors may have occurred:
Display
Description
The flash has fired at full power and the
The flash status indicator flashes
photograph may be underexposed. Try
for about 3 seconds after a photoreducing the distance to the subject or
graph is taken.
increasing ISO sensitivity (0 135).
Continuous use has caused the temperaThe flash or capture status indica- ture of the flash unit to rise and the unit
tor flashes once a second.
has been disabled to protect the flash.
Turn the unit off and wait for it to cool.
The flash and capture status indi- A data transfer error has occurred. Check
cators flash once every 2 seconds. that the flash unit is correctly attached.
An error has occurred in the unit’s internal circuitry. Turn the camera off, remove
The flash status indicator flashes 8
the flash unit, and take the camera and
times a second.
flash unit to a Nikon-authorized service
center for consultation.

The GP-N100 GPS Unit
GP-N100 GPS units (available separately) can be used to record
information on your current position when pictures are taken.
This information can be viewed on a computer using ViewNX 2
(supplied) or Capture NX 2 (available separately; 0 171).
ViewNX 2 can be installed from the supplied ViewNX 2/
Short Movie Creator CD.

Attaching the GP-N100
The GP-N100 attaches to the camera multi accessory port.

1 Remove the multi accessory port cover.
Remove the cover as shown at right.
Keep the cover in a safe place and
replace it when the port is not in use.

2 Attach the GP-N100.

Turn the camera off and mount the
GP-N100 on the multi accessory port
as described in the manual provided
with the GPS unit.

Setup Menu Options
The GPS item in the setup menu contains the following options.
To display GPS options, press G and select GPS in the setup
menu.
• Auto power off: Choose whether the displays turn off automatically when the GP-N100 is attached.
Camera displays turn off automatically if no operations are
performed for the time selected for Auto power off in the
setup menu (0 162). This reduces the drain on the battery.
The displays do not turn off automatically while the
Disable
GP-N100 is attached.
Enable

• Position: This item is only available if the GP-N100 is currently
receiving GPS data, when it displays the current latitude, longitude, altitude, Coordinated Universal Time (UTC), and expiry
date for Assisted GPS data (0 78) as reported by the GP-N100.
• Use GPS to set clock: Select Yes to synchronize the camera clock
with the time reported by the GPS device.

A Coordinated Universal Time (UTC)

UTC data is provided by the GPS device and is independent of the camera clock.

A Connection Status

Connection status is shown by the h icon in the camera display (0 4)
and the LED on the GP-N100:
h icon

LED

Flashes
h (flashes)
(red)
h (static)

Flashes
(green)

h (static)

On
(green)

Description
The GPS unit is searching for a signal. Pictures
taken while the h icon is flashing do not
include GPS data.
The unit is receiving signals from three GPS
satellites. GPS data will be recorded with photographs.
The unit is receiving signals from four or more
GPS satellites. More precise GPS data will be
recorded with photographs.

GPS data are only recorded while the GP-N100 is receiving signals from
at least three satellites. If no signal is received for over two seconds, the
h icon will clear from the camera display and no GPS data will be
recorded.

A Assisted GPS

When connected to a computer using its supplied USB cable, the
GP-N100 can use resources provided by Nikon servers to reduce the
time needed to acquire GPS data (GPS data can still be acquired without these resources, although the time needed to do may increase).
This method of determining position using supplementary information stored in a file supplied by a network is known as “Assisted GPS”
(A-GPS or aGPS). To connect to Nikon servers and receive Assisted GPS
files, the GP-N100 uses GP-N100 Utility software, available for download from the following website:
http://nikonimglib.com/gpn100u/
For information on using GP-N100 Utility, see the above website or
online help. The Assisted GPS file provided by the servers is valid for
two weeks, after which time it can no longer be used to assist global
positioning. Use GP-N100 Utility regularly to keep the GP-N100 up to
date.

The WU-1b Wireless Mobile Adapter
Attach an optional WU-1b wireless mobile adapter to the camera USB connector to copy images to, or control the camera
from, smartphone or tablet devices running the Wireless Mobile
Adapter Utility app.

1 Connect the WU-1b.

After removing the rubber cap from
the WU-1b USB connector, turn the
camera off and attach the adapter to
the camera USB connector.

2 Activate the adapter.

Select Wireless mobile adapter in
the setup menu (0 159). A confirmation dialog will be displayed; select
Yes to activate the WU-1b, allowing
wireless connection to smart devices,
or No to deactivate the WU-1b and
prevent wireless connection.

Reset file numbering
Time zone and date
Activate the wireless
mobile adapter?
Yes
No
Firmware version

D Using the WU-1b for the First Time

After connecting the WU-1b, you will need to adjust smart device
wireless settings. See the WU-1b manual for more information.

3 Launch the Wireless Mobile Adapter Utility.

Launch the Wireless Mobile Adapter Utility on the smart
device.

4 Take pictures remotely.

Once a wireless connection is established, the smart device will display
the view through the camera lens; the
camera will display a message stating
that a wireless connection is active.

Reset file numbering
Time zone and date
Wireless mobile
adapter active
End

Firmware version

D Wireless Networks

Camera settings can not be adjusted while the camera is connected to
a wireless network. To end the connection, press the G button.

A The Wireless Mobile Adapter Utility

The Wireless Mobile Adapter Utility is available from Google Play and
the App Store. System requirements and Information on installation,
wireless connections and use may be found in the Wireless Mobile
Adapter Utility manual available in pdf format from the following URL:
http://nikonimglib.com/ManDL/WMAU/

IMore on Playback
Photo Information

Photo information is superimposed on
images displayed in full-frame playback
(0 30). Press the $ button to cycle
through simple photo information,
detailed photo information (0 82), and
no photo information.
❚❚ Simple Photo Information
1 2
3

$ button

1 12 2

10
9

13
4

10
4 9
8

7 6

Still images
1 Shooting mode ..................................... 7
2 Protect status.....................................112
3 Frame number/total number of
images
4 Image quality.....................................123
Frame rate...........................................125
5 Image size...........................................123
Frame size...........................................126

Movies
6 File name ............................................124
7 Time of recording ...................... 19, 165
8 Date of recording....................... 19, 165
9 Battery indicator .................................21
10 Rating .................................................... 88
11 Movie length........................................ 56
12 Audio recording indicator...............147
13 On-screen guide (for movies) ..........56

A Thumbnail Playback

Press $ to view or hide photo info when thumbnails are displayed
(0 84).

❚❚ Detailed Photo Information
1
2 3 4

17 18
5
6 30
7
8
9 29
28
27

16
15
14
13
12
11

19
20
21
26

25 24

23 22

Still images

2 31 18 4
5
3
6
14
29
19

30
13
12
28
27
26

25 24

23 22

Movies

1 Shooting mode ..................................... 7
2 Frame number/total number of
images
3 Protect status.....................................112
4 Camera name
5 Retouch indicator ...........113, 114, 115
Movie edit indicator.........................116
6 Histogram showing distribution of
tones in image ................................... 83
7 ISO sensitivity ....................................135
8 Focal length .......................................201
9 Flash mode........................................... 69
10 Flash control.......................................157
11 Flash compensation.........................158
12 Exposure compensation ................... 68
13 Metering .............................................128
14 Exposure mode .................................122
15 Shutter speed ............................... 35, 37
16 Aperture......................................... 36, 37

17 Auto distortion control....................142
18 GPS data indicator.............................. 76
19 Picture Control ..................................136
20 Active D-Lighting indicator............144
21 HDR ......................................................145
22 Image quality.....................................123
Frame rate .................................125, 126
23 Image size...........................................123
Frame size..................................125, 126
24 File name ............................................124
25 Time of recording ...................... 19, 165
26 Date of recording....................... 19, 165
27 Battery indicator ................................. 21
28 White balance....................................130
White balance fine-tuning .............131
29 Color space.........................................143
30 Rating .................................................... 88
31 Audio recording indicator ..............147

A Histograms (0 82)

Camera histograms are intended only as a guide and may differ from
those in imaging applications. Sample histograms are shown below:
• If brightness varies evenly across the
image, the distribution of tones
will be relatively even.
• If the image is dark, tone distribution will be shifted to the left.

• If the image is bright, tone distribution will be shifted to the right.

Exposure compensation shifts the distribution of tones to the right
when raised, to the left when lowered. Histograms can give you a
rough idea of overall exposure when bright ambient lighting makes it
difficult to see the display in the monitor.

Thumbnail Playback
To view pictures in “contact sheets” of 4,
9, or 72 images, rotate the command dial
left when a picture is displayed full frame.

Command dial

Full-frame
playback

Thumbnail playback

Calendar
playback

The following operations can be performed:
To

Use

Display more
images
Display fewer
images

/ Use the multi selector to highlight images.
You can delete (0 87) or rate (0 88) the
highlighted image or zoom in for a closer
look (0 86).

Highlight images

View highlighted
image
Delete highlighted
image
Rate highlighted
image

Description
Rotate left to increase the number of images
displayed, right to decrease. Rotate left
when 72 images are displayed to view
images taken on selected dates (0 85).
Rotate right when 4 images are displayed to
view the highlighted image full frame.

Press J to view the highlighted image full
frame.

See page 87.

See page 88.

Calendar Playback
To view pictures taken on a selected date,
rotate the command dial left when 72
pictures are displayed (0 84).

Command dial

Full-frame
playback

Calendar playback
Thumbnail playback

The following operations can be performed:
To

Use

Description
/

Highlight date

View pictures taken
on highlighted date
Delete pictures taken
on highlighted date
Exit to thumbnail
display

Use multi selector to highlight date.

J
O

Press J to view the first picture
taken on the highlighted date.
Press O to delete all pictures taken on
the highlighted date.

Rotate right to return to 72-frame display.

Playback Zoom
To zoom in on a photograph, display it
full frame and rotate the command dial
right. Playback zoom is not available with
movies or Motion Snapshots.
Command dial

The following operations can be performed:
To

Use

Zoom in or
out

View other
areas of
image

View faces

I
Exit zoom

Description
Rotate the command dial
right to zoom in, left to
zoom out. Whenever you
zoom in or out, a navigation window will appear
with the area currently
visible in the display indicated by a yellow border. Press 1, 2, 3, or 4 to
scroll the image.
Faces (up to five)
detected during face priority are indicated by
white borders in the navigation window. Rotate
the multi selector to view
other faces.
Return to full-frame playback.

Deleting Pictures
Pictures can be deleted from the memory card as described
below. Note that once deleted, pictures can not be recovered;
protected images, however, will not be deleted.

Deleting the Current Picture
To delete the picture currently displayed
in full-frame playback or selected in the
thumbnail list, press O. A confirmation
dialog will be displayed; press O again to
delete the picture and return to playback,
or press K to exit without deleting the
O button
picture.

The Playback Menu
To delete multiple images, press the G button, select Delete
in the playback menu, and choose from the options below. A
confirmation dialog will be displayed; select Yes to delete the
images (note that some time may be required if a large number
of images is selected).
Highlight images and press 1 or 3 to select or
Delete selected images deselect (0 111). Press J to exit when the selection is complete.
Highlight dates and press 2 to select or deselect.
To view the pictures taken on the highlighted
Select images by date date, rotate the command dial right; rotate the
dial left to return to the date list. Press J to delete
all pictures taken on the selected dates.
Delete all images
Delete all pictures on the memory card.

Rating Pictures
Rate pictures or mark them as candidates for later deletion. Rating is not available with protected images.

1 Select a picture.

Display a picture in full-frame playback or highlight it in the
thumbnail list.

2 Press &.

Press & and rotate the multi selector
to choose from ratings of zero to five
stars, or select ) to mark the picture
as a candidate for later deletion.
& button

Slide Shows
To view a slide show of the pictures on
the memory card, press the G button,
select Slide show in the playback menu,
and follow the steps below.
G button

1 Select the type of image used in the show.
Highlight the desired option and press J.

Display all the images on the memory card.
Display still images only.
Display movies only.
Display only the movie portion of Motion Snapshots.
Motion Snapshot
The associated photographs are not displayed.
Display
only
images
recorded on a selected
Select images by date. A calendar will be
date
displayed; use the multi
selector to highlight a
date.
All images
Still images
Movies

2 Adjust display times and choose a background track.

Adjust the following options:

Frame interval Choose how long each still image is displayed.
Choose how much of each movie is played back
before the next slide is displayed. Choose Same as
Movie playback frame interval to display the next slide after the
time
time selected for Frame interval, No limit to play
back the entire movie before displaying the next
slide.
Mute audio playback or choose a slide show background track. Select Movie sound tracks to play
Audio
only audio recorded with movies; in this case, no
sound is played for still images or Motion Snapshots.

3 Select Start.

Highlight Start and press J to start
the slide show.

The following operations can be performed while a slide
show is in progress:
To

Use

Pause/resume

Adjust volume
Exit to playback
mode

Description
Press 4 to return to the previous frame, 2
to skip to the next frame.

Skip back/skip
ahead

Pause the show. Press again to resume.
Rotate the command dial to adjust volume.

End the show and return to playback
mode.

The options shown at right are displayed when the show ends. Select
Resume to restart or Exit to exit to the
playback menu.

QConnections

Installing the Supplied Software
Install the supplied software to copy pictures to your computer
for viewing and editing pictures and creating short movies.
Before installing the software, confirm that your system meets
the requirements on page 93.

1 Start

the computer and insert the installer ViewNX 2/
Short Movie Creator CD.
Windows

Mac OS

Double-click icon
on desktop

Double-click
Welcome icon

2 Select a language.

If the desired language is q Select region (if required)
not available, click Region
Selection to choose a different region and th en
choose the desired language (region selection is
not available in the European release).
w Select language
e Click Next

3 Start the installer.

Click Install and follow the
on-screen instructions.

Click Install

4 Exit the installer.

Click Yes (Windows) or OK (Mac OS) when installation is complete.
Windows

Mac OS

Click Yes

Click OK

The following software is installed:
• ViewNX 2
• Short Movie Creator
• Apple QuickTime (Windows only)

5 Remove the installer CD from the CD-ROM drive.

A Supplied Software

Be sure to update to the latest versions of the supplied software. Nikon
Message Center 2 will periodically check for updates while the computer is connected to the Internet.

System Requirements
The system requirements for ViewNX 2 are:
Windows
• Photos/JPEG movies: Intel Celeron, Pentium 4, or Core series, 1.6
GHz or better
CPU
• H.264 movies (playback): 3.0 GHz Pentium D or better
• H.264 movies (editing): 2.6 GHz Core 2 Duo or better
Pre-installed versions of Windows 7 Home Basic/Home Premium/
Professional/Enterprise/Ultimate (64- and 32-bit editions; Service Pack 1),
OS
Windows Vista Home Basic/Home Premium/Business/Enterprise/
Ultimate (64- and 32-bit editions; Service Pack 2), or Windows XP Home
Edition/Professional (32-bit editions only; Service Pack 3)
• Windows 7/Windows Vista: 1 GB or more (2 GB or more recommended)
RAM
• Windows XP: 512 MB or more (2 GB or more recommended)
Hard-disk A minimum of 500 MB available on the startup disk (1 GB or more recspace ommended)
• Resolution: 1024 × 768 pixels (XGA) or more (1280 × 1024 pixels/SXGA
Monitor or more recommended)
• Color: 24-bit color (True Color) or more
Mac OS
• Photos/JPEG movies: Intel Core or Xeon series
CPU
• H.264 movies (playback): 2 GHz Core Duo or better
• H.264 movies (editing): 2.6 GHz Core 2 Duo or better
OS
Mac OS X version 10.6.8, 10.7.5 or 10.8.2
RAM 512 MB or more (2 GB or more recommended)
Hard-disk A minimum of 500 MB available on the startup disk (1 GB or more recspace ommended)
• Resolution: 1024 × 768 pixels (XGA) or more (1280 × 1024 pixels/SXGA
Monitor or more recommended)
• Color: 24-bit color (millions of colors) or more

A Motion Snapshots

ViewNX 2 is required to view Motion Snapshots saved using the File
format > NMS files option in the shooting menu (0 128).

The system requirements for Short Movie Creator are:
Windows
2 GHz intel Core 2 Duo or better
Pre-installed versions of Windows 7 Home Basic/Home Premium/
Professional/Enterprise/Ultimate (Service Pack 1), Windows Vista
Home Basic/Home Premium/Business/Enterprise/Ultimate (Service
OS
Pack 2), or Windows XP Home Edition/Professional (Service Pack 3). All
installed programs run as 32-bit applications in 64-bit editions of
Windows 7 and Windows Vista.
1.5 GB or more with at least 128 MB of video RAM (2 GB or more
RAM
with at least 256 MB of video RAM recommended for creating HD movies)
Hard-disk A minimum of 500 MB available on the startup disk (1 GB or more recspace ommended)
• Resolution: 1024 × 768 pixels (XGA) or more
Monitor
• Color: 32-bit color (True Color) or more
Other DirectX 9 or later and OpenGL 1.4 or later
CPU

Mac OS
2 GHz intel Core 2 Duo or better
Mac OS X version 10.6.8, 10.7.5 or 10.8.2
1 GB or more
A minimum of 500 MB available on the startup disk (1 GB or more recommended)
• Resolution: 1024 × 768 pixels (XGA) or more
Monitor
• Color: 24-bit color (millions of colors) or more

CPU
OS
RAM
Hard-disk
space

If your system does not meet the above requirements, only
ViewNX 2 will be installed (0 93).

A Supported Operating Systems

See the websites listed on page xvii for the latest information on supported operating systems.

Viewing and Editing Pictures on a Computer
Transferring Pictures

1 Choose how pictures will be copied to the computer.

Choose one of the following methods:
• Direct USB connection: Turn the camera off and ensure that the
memory card is inserted in the camera. Connect the camera
to the computer using the supplied USB cable (do not use
force or insert the connectors at an angle) and then turn the
camera on.

• SD card slot: If your computer is equipped with an SD card slot,
the card can be inserted directly in the slot.
• SD card reader: Connect a card reader (available separately
from third-party suppliers) to the computer and insert the
memory card.

2 Start the Nikon Transfer 2 component of ViewNX 2.

If a message is displayed prompting you to choose a program, select Nikon Transfer 2.

A Windows 7

If the following dialog is displayed, select Nikon Transfer 2 as
described below.
1 Under Import pictures and
videos, click Change program. A program selection
dialog will be displayed; select
Import File using Nikon
Transfer 2 and click OK.
2 Double-click Import file.

3 Click Start Transfer.

At default settings, all the
pictures on the memory
card will be copied to the
computer.

Click Start Transfer

4 Terminate the connection.

If the camera is connected to the computer, turn the camera
off and disconnect the USB cable. If you are using a card
reader or card slot, choose the appropriate option in the computer operating system to eject the removable disk corresponding to the memory card and then remove the card from
the card reader or card slot.

Viewing Pictures
Pi c t u r e s a r e d i s p l a y e d i n
ViewNX 2 when transfer is complete.

A Starting ViewNX 2 Manually

• Windows:
Double-click
the
ViewNX 2 shortcut on the desktop.
• Mac OS: Click the ViewNX 2 icon in
the Dock.

❚❚ Retouching Photographs
To crop pictures and perform
such tasks as adjusting sharpness and tone levels, click the
Edit button in the toolbar.
❚❚ Creating Short Movies
Use the Short Movie Creator to
create short movies combining
photos, music, Motion Snapshots, and movie footag e
(0 98).
❚❚ Printing Pictures
Click the Print button in the
toolbar. A dialog will be displayed, allowing you to print
pictures on a printer connected
to the computer.
❚❚ Viewing Places
If the selected image contains
GPS data recorded using an
optional GP-N100 GPS unit
(0 76), click the Geo Tag button in the toolbar to view a
map showing where the picture was taken (Internet connection
required).

A For More Information

Consult online help for more information on using ViewNX 2.

Creating Short Movies
Use the supplied Short Movie Creator software to create movies
combining photographs with Motion Snapshots, movies, and
music.

1 Transfer pictures.

Transfer pictures as described on page 95.

2 Select components.

Select pictures in ViewNX 2.

3 Start Short Movie Creator.

Click the Short Movie
Creator button in ViewNX 2.

The images selected in Step “Components” panel
2 will be displayed in the
Short Movie Creator “Components” panel; if desired,
additional pictures can be
dragged into the “Components” panel from ViewNX 2
and re-ordered using drag
and drop. In the case of
photos taken with the
Smart Photo Selector, only the best shot will be displayed.
The photo and movie components of Motion Snapshots
appear as separate files.

4 Select a style and background track.

Select a style in the “Styles” panel and a background track in
the “Music” panel. To preview the movie, click
.

5 Save the movie.

Click Create Movie. The dialog shown at right will be
displayed; select one of the
following options and click
Create.
• Save file: Save the movie to a
folder on the computer.
• Save to Camera (memory card):
Save the movie to a memory card so that it can later
be played back on the camera. To use this option, you
will first need to insert a memory card that has been formatted in the camera (0 161) into a card reader or card slot.

A Starting Short Movie Creator

If ViewNX 2 is not running, you can start
Short Movie Creator by double-clicking
the Short Movie Creator icon on the
desktop (Windows) or clicking the Short
Movie Creator icon in the Dock (Mac OS).

Windows

Mac OS

A Viewing Short Movies on Other Devices

Movies saved to a memory card using the Save to Camera (memory
card) option in Short Movie Creator can be viewed on the camera, or
displayed on a television monitor when the camera is connected to a
TV (0 100). Movies created in other applications or using the Save file
option in Short Movie Creator can not be viewed on the camera.

A For More Information

Consult online help for more information on using Short Movie Creator.

Viewing Pictures on TV
Connect the camera to a television for playback.

A Connecting an HDMI Cable

Always turn the camera off before connecting or disconnecting HDMI
cables. When connecting cables, do not use force or attempt to insert
the connectors at an angle.

High-Definition Devices
A type C mini-pin High-Definition Multimedia Interface (HDMI)
cable (available separately from third-party suppliers) can be
used to connect the camera to high-definition video devices.

1 Connect the HDMI cable.

Turn the camera off and connect the HDMI cable.

Connect to HD device
(choose cable with
appropriate connector)

Connect to camera

Q 2 Tune the device to the HDMI channel.
3 Turn the camera on.

Turn the camera on; the camera monitor will remain off and
the camera shooting mode display will appear on the HD
device. Pictures can be played back using camera controls as
described elsewhere in this manual; note that the edges of
images may not be visible in the display.

100

D Close the Connector Cover

Close the connector cover when the connectors are not in use. Foreign
matter in the connectors can interfere with data transfer.

A Television Playback

Volume can be adjusted using the controls on the television; adjusting
volume on the camera has no effect. Use of an EH-5b AC adapter and
EP-5D power connector (available separately) is recommended for
extended playback.

❚❚ HDMI Device Control
To control the camera remotely from a device that supports
HDMI-CEC (High-Definition Multimedia Interface–Consumer
Electronics Control), select On for HDMI device control in the
camera setup menu. The HDMI-CEC device will display a remote
control guide and the remote control can be used in place of the
following camera controls:
Camera
1, 3, 4, 2
J
K
G
Slide show menu

Remote control
Up, down, left, and right buttons
Center button
Blue button
Red button
Green button

The remote control guide can be hidden or displayed at any time
by pressing the yellow button on the remote control. See the
television manual for details.

101

Printing Photographs
Selected JPEG images can be printed on a PictBridge printer
connected directly to the camera.

Connecting the Printer
Connect the camera using the supplied USB cable.

1 Turn the camera off.
2 Connect the USB cable.

Turn the printer on and connect the USB cable as shown. Do
not use force or attempt to insert the connectors at an angle.

A USB Hubs
Connect the camera directly to the printer; do not connect the
cable via a USB hub.

3 Turn the camera on.

A welcome screen will be displayed in the monitor, followed
by a PictBridge playback display.
q

A Printing Via Direct USB Connection

Print setup

Be sure the EN-EL21 battery is fully charged or use an optional EH-5b
AC adapter and EP-5D power connector.

102

Printing Pictures One at a Time

1 Select a picture.

Press 4 or 2 to view additional pictures. Rotate the command dial right
to zoom in on the current frame
(0 86; rotate the dial left to exit
zoom). To view nine pictures at a time,
rotate the dial left when a picture is
displayed full frame. Use the multi selector to highlight pictures, or rotate the command dial right to display the highlighted picture full frame.
Print setup

2 Adjust print options.

Press J to display PictBridge print options (0 107). Press 1
or 3 to highlight options and press 2 to select.

3 Start printing.

Highlight Start printing and press J
to start printing. To cancel before all
copies have been printed, press J
again.

D Selecting Photographs for Printing

Movies and NEF (RAW) photographs (0 123) can not be selected for
printing. If Motion Snapshots are selected, only the photographs will
be printed; the movie portion will not be printed. If photographs taken
with the Smart Photo Selector are selected, only the best shot will be
printed.

103

Printing Multiple Pictures

1 Display the PictBridge menu.

Press the G button in the
PictBridge playback display (see Step
3 on page 102).

2 Choose an option.

Print setup

Highlight one of the following options and press 2.
• Select images for printing: Select pictures for printing.
• Select by date: Print one copy of each picture taken on
selected dates.
• Print DPOF print order: Print an existing print order created with
the DPOF print order option in the playback menu
(0 108). The current print order will be displayed in Step 3.
• Index print: To create an index print of all JPEG pictures on the
memory card, proceed to Step 4. Note that if the memory
card contains more than 256 pictures, a warning will be displayed and only the first 256 images will be printed.

104

3 Select pictures or choose dates.

If you chose Select images for printing or Print DPOF print
order in Step 2, press 4 or 2 or rotate the multi selector to
highlight pictures. To select the current picture for printing,
press 1. The picture will be marked with a Z icon and the
number of prints will be set to 1; press 1 or 3 to specify the
number of prints (up to 99; to deselect the picture, press 3
when the number of prints is 1). Continue until all the desired
pictures have been selected.

If you chose Select by date in Step 2, press 1 or 3 to highlight
dates and press 2 to select or deselect.

A Inspecting Pictures

To view pictures taken on the date highlighted in the Select by
date date list, rotate the command dial left. Use the multi selector
to highlight pictures, or rotate the dial left to return to the date list.
The picture currently highlighted in the Select images for printing
or Print DPOF print order displays or in the Select by date thumbnail display can be inspected by pressing the command dial; the
picture will be displayed full screen while the dial is pressed.

105

4 Adjust print options.

Press J to display PictBridge print options. Press 1 or 3 to
highlight page size, border, or time stamp items and press 2
to display the options described on page 107; note that a
warning will be displayed if the selected page size is too small
for an index print.

5 Start printing.

Highlight Start printing and press J
to start printing. To cancel before all
copies have been printed, press J
again.

A Errors

See page 192 for information on what to do if an error occurs during
printing.

106

A PictBridge Print Options
Highlight a page size (only sizes supported by the current
Page printer are listed) and press J to select and exit to the previous
size menu (to print at the default page size for the current printer,
select Use printer settings).
Number This option is listed only when pictures are printed one at a
of time. Press 1 or 3 to choose number of copies (maximum 99),
copies then press J to select and return to the previous menu.
This option is listed only if supported by the printer. Highlight
Print Use printer settings (use current printer settings), Yes (print
border white borders), or No (no borders) and press J to select and
exit to the previous menu.
Highlight Use printer settings (use current printer settings),
Print
Yes (print times and dates of recording on photos), or No (no
time
time stamp) and press J to select and exit to the previous
stamp
menu.
This option is listed only when pictures are printed one at a
time on a printer that supports cropping. To exit without cropping, highlight No and press J. To crop the current picture,
highlight Yes and press 2. A crop selection dialog will be disCrop
played; rotate the command dial right to increase the size of
the crop, left to decrease. Position the crop using the multi
selector and press J. Note that print quality may drop if small
crops are printed at large sizes.

107

Creating a DPOF Print Order: Print Set
The DPOF print order option is used to
create digital “print orders” for PictBridge-compatible printers and devices
that support DPOF. Press the G button, select DPOF print order in the playb a c k m e n u, a n d ch o o s e f r o m t h e
following options:
Press 4 or 2 or rotate the multi selector to highlight pictures (0 111). To
select the current picture for printing,
press 1. The picture will be marked
with a Z icon and the number of
prints will be set to 1; press 1 or 3 to
Select/ specify the number of prints (up to 99;
set to deselect the picture, press 3 when the number of prints is 1).
When the selection is complete, press J to display printing
options. Highlight Print shooting info (print the shutter speed
and aperture on all pictures in the print order) or Print date
(print the date of recording on all pictures in the print order) and
press 2 to select or deselect, and then press J to complete the
print order.
Reset Remove all pictures from the print order.

D DPOF Print Order

DPOF date and shooting info options are not supported when printing
via direct USB connection; to print the date of recording on photographs in the current print order, use the PictBridge Print time stamp
option (0 107).

The DPOF print order option can not be used if there is not enough
space on the memory card to store the print order. For restrictions on
the types of images that can be selected for printing, see page 103.
Print orders may not print correctly if images are deleted using a computer or other device after the print order is created.

108

oThe Playback Menu

To display the playback menu, press G and select the playback menu tab (K).

G button

The playback menu contains the following options:
Option
Delete

Description
Delete multiple images.

Default
—
Image type: All images
Frame interval: 5 s
View movies and photos in a slide
Slide show
Movie playback time:
show.
Same as frame interval
Audio: Background track 1
Image
Choose whether pictures are disOn
review
played after shooting.
Rotate “tall” (portrait-orientation)
Rotate tall
On
pictures for display during playback.
DPOF print
Create digital “print orders”.
—
order
Protect pictures from accidental
Protect
—
deletion.
Rating
Rate pictures.
—
Brighten shadows in dark or back-lit
photos, creating a retouched copy
D-Lighting
—
that is saved separately from the
unmodified original.
Create small copies of selected picChoose size: 1.1 M
Resize
tures.

0
87

112
112
108
112
112

113

114

109

Option

Description
Create cropped copies of selected
pictures.
Create copies of movies from which
Edit movie unwanted footage has been
trimmed.
Change
Change the themes for existing
theme
Motion Snapshots.

Crop

s
z
8
y
9
t
I
Q
Q
o
g
n

110

Default

—

115

—

116

—

117

A Playback

The camera may be unable to display or retouch images that were created or have been edited with other devices.

A Image Quality

Copies created from JPEG photos are the same quality as the original,
while copies created from NEF (RAW) photos are saved as fine-quality
JPEG images.

Selecting Multiple Images
Choosing the options listed below displays an image selection dialog. Press 4
or 2 or rotate the multi selector to highlight pictures (only pictures to which the
operation applies are available for selection).
• Delete > Delete selected images (0 87)
• DPOF print order > Select/set (0 108)
• Protect > Select/set (0 112)
• Rating (0 112)
• D-Lighting (0 113)
• Resize > Select images (0 114)
• Crop (0 115)
• Edit movie (0 116)
• Change theme (0 117)

A Inspecting Pictures

The picture currently highlighted in the
thumbnail display can be inspected by pressing the command dial; the picture will be displayed full screen while the dial is pressed.

111

Image Review
If On is selected, pictures will be displayed immediately after
shooting. To view pictures when Off is selected, press the K
button.

Rotate Tall

s
z
8

Choose whether to rotate “tall” (portrait-orientation) pictures for
display during playback. Note that because the camera itself is
already in the appropriate orientation during shooting, images
are not rotated automatically during image review.
On

y
9

Off

“Tall” (portrait-orientation) pictures are automatically rotated
for display in the camera monitor. Pictures taken with Off
selected for Auto image rotation (0 166) will be displayed in
“wide” (landscape) orientation.
“Tall” (portrait-orientation) pictures are displayed in “wide”
(landscape) orientation.

Protect

Protect selected images from accidental deletion. Note that this
option does NOT protect files from deletion when the memory
card is formatted (0 161).

Q
Q

Press 4 or 2 or rotate the multi selector to highlight pictures
Select/set (0 111) and press 1 or 3 to select or deselect. Press J to exit
when the operation is complete.
Reset
Remove protection from all pictures.

o
g
n

112

Rating
Press 4 or 2 or rotate the multi selector to highlight pictures
(0 111) and press 1 or 3 to choose a rating (0 88). Press J to
exit when the operation is complete.

D-Lighting
Applied to selected images, D-Lighting creates copies that have
been processed to brighten shadows. Use to retouch dark or
backlit photographs.

Before

After

Press 4 or 2 or rotate the multi selector
to highlight an image (0 111) and press
J to display the options shown at right.
Press 1 or 3 to choose the amount of
correction performed (the effect can be
previewed in the display; press and hold
the command dial to zoom in) and press J to create a
retouched copy.

D D-Lighting

Noise (randomly-spaced bright pixels, fog, or lines) may appear in copies created with D-Lighting. Uneven shading may be visible with some
subjects.

A Image Size

Copies created from JPEG photos are the same size as the original,
while copies created from NEF (RAW) photos are saved as JPEG images
with a size of 4608 × 3072.

113

Resize

Create small copies of selected photographs. Select Choose size and choose a
size from 1280×856; 1.1 M (1280 × 856
pixels), 960×640; 0.6 M (960 × 640 pixels), and 640×424; 0.3 M (640 × 424 pixels), and then choose Select images.
Press 4 or 2 or rotate the multi selector to highlight pictures
(0 111) and press 1 or 3 to select or deselect. When the selection is complete, press J to display a confirmation dialog and
select Yes to save the resized copies.

D Resized Copies

y
9
t
I
Q
Q
o
g
n

114

Playback zoom may not be available with resized copies.

Crop
Create a cropped copy of selected photographs. Press 4 or 2 or rotate the multi
selector to highlight a picture (0 111)
and press J to display the image with
the default crop shown in yellow. Use the
controls below to choose a crop and save
the copy.
To

Use

Description

Choose size

Rotate the command dial to choose the crop
size.

Choose
aspect ratio

Rotate the multi selector to choose between
aspect ratios of 3 : 2, 4 : 3, 1 : 1, and 16 : 9.

Position crop

Press 1, 2, 3, or 4 to position the crop.

Create copy

Save the current crop as a separate file.

D Cropped Copies

Playback zoom may not be available with
cropped copies. The size of the copy varies
with crop size and aspect ratio and appears
at upper left in the crop display.

115

Edit Movie
Trim footage from movies to create edited copies.

1 Select Choose start point or Choose end point.

Choose from the following options:
• Choose start point: Trim the opening
footage.
• Choose end point: Trim the closing footage.

z 2 Select a movie.
8

Press 4 or 2 or rotate the multi selector to highlight a movie
(0 111) and press J to select.

Pause the movie on opening or closing frame.
y 3 Play the movie back, pressing J to

9
t
I

begin and resume playback and 3 to
pause (0 56; the first frame is indicated by a h icon in the display, the
last frame by i). Pause playback
when you reach the frame that will
become the new opening or closing frame.

Q 4 Delete the unwanted frames.
Q

Press 1 to delete all frames before (Choose start point) or
after (Choose end point) the current frame.

Save the copy.
o 5 Highlight Yes and press J to save the

g
n

116

edited copy. If necessary, the copy can
be trimmed as described above to
remove additional footage.

D Trimming Movies

Movies must be at least two seconds long. If a copy can not be created
at the current playback position, the current position will be displayed
in red in Step 4 and no copy will be created. The copy will not be saved
if there is insufficient space available on the memory card.
To prevent the camera from turning off unexpectedly, use a fullycharged battery when editing movies.

Change Theme
Assign existing Motion Snapshots new themes (NMS-format files
only; Motion Snapshots created with MOV file selected for File
format in the shooting menu can not be assigned new themes).
Choose from Beauty, Waves, Relaxation, Tenderness, and
None. To hear a theme, highlight it and press the $ button;
volume is controlled with the command dial.

A See Also

See page 128 for information on Motion Snapshot file formats.

117

s
z
8
y
9
t
I
Q
Q
o
g
n

118

iThe Shooting Menu

To display the shooting menu, press G and select the shooting menu tab (C, t, u, v, w, u, z, or v).

G button

The shooting menu contains the following options:
Option
Description
Reset shooting Reset shooting options to
options
default values.

Default

—

122

Scene auto selector
Exposure
Choose how the camera sets (Motion Snapshot mode)/
122
mode
shutter speed and aperture.
t Programmed auto
(other modes)
Choose a file format and comImage quality
JPEG normal
123
pression ratio.
Image size
Choose a size for new photos.
4608 × 3072; 14.2 M
123
Choose the frame rate for conContinuous
15 fps
125
tinuous shooting (0 63).
Silent
Choose whether to mute shutOff
125
photography ter and control sounds.
Choose the number of shots
Number of
selected by the Smart Photo
5
125
shots saved
Selector (0 44).
Choose a frame rate for slowFrame rate
400 fps
125
motion movies (0 53).
Choose HD movie frame size
1080/60i
126
Movie settings
and frame rate (0 49).

119

Option
Description
Choose when the movie porMovie before/
tion of Motion Snapshots is
after
recorded (0 59).
Choose a file format for new
File format
Motion Snapshots (0 59).
Choose how the camera
Metering
meters exposure.
Adjust settings for different
White balance
types of lighting.
Control the camera’s sensitivity
ISO sensitivity
to light.
Choose how the camera proPicture Control
cesses pictures.
Custom Picture Create custom Picture ConControl
trols.
Choose whether the camera
Auto distortion
corrects barrel and pincushion
control
distortion.
Choose a color space for new
Color space
pictures.
Active
Avoid loss of detail in highD-Lighting
lights and shadows.
Enhance detail in highlights
HDR
and shadows when photographing high-contrast scenes.
Long exposure Reduce noise in long timeNR
exposures.
High ISO noise Reduce noise at high ISO sensireduction
tivities.

120

Movie sound
options

Choose
options.

sound

Default

1.0 s : 0.6 s

127

NMS file

128

Matrix

128

Auto

130

Auto (160–3200)

135

Standard

136

—

140

Off

142

sRGB

143

144

Off

145

Off

146

Microphone:
recording
Auto sensitivity (A)
147
Wind noise reduction: On

Option

Description
Adjust settings for 1 NIKKOR
lenses with vibration reduction.
Choose how the camera
Focus mode
focuses.
Choose how the focus area is
AF-area mode
selected.
Face-priority Turn face priority on or off.
Built-in AF
Control the built-in AF-assist
assist
illuminator.
Choose a flash mode for the
Flash control built-in flash and optional flash
units.
Flash
Control flash output.
compensation

Vibration
reduction

Default

Active/On 1

148

See page 149

149

Auto-area 2

153

On 3

156

TTL (Manual: Full)

157

0.0

158

1 Varies with lens (0 148).
2 The camera focuses on the subject in the center of the frame when Slow
motion is selected in advanced movie mode.
3 Face detection is not available when Slow motion is selected in advanced
movie mode.

121

Reset Shooting Options
Select Yes to reset the options in the shooting menu and other
shooting settings to default values (0 119, 185).

Exposure Mode
The options in the exposure mode menu offer varying degrees
of control over shutter speed and aperture.
An automatic, “point-and-shoot” mode in which the
camera not only chooses shutter speed and aperture
but adjusts other settings to suit the subject (automatic
scene selection; 0 26).
The camera sets shutter speed and aperture for optimal
t Programmed exposure (0 34). Recommended for snapshots and in
auto
other situations in which there is little time to adjust
camera settings.
You choose the shutter speed; the camera selects an
u Shutteraperture for best results (0 35). Use to freeze or blur
priority auto
motion.
You choose the aperture; the camera selects a shutter
v Aperturespeed for best results (0 36). Use to blur the backpriority auto ground or bring both foreground and background into
focus.
You control both shutter speed and aperture (0 37). Set
w Manual
shutter speed to “Bulb” or “Time” for long time-exposures.

h Scene auto
selector

122

A ISO Sensitivity (t, u, v, and w Modes)
When an “auto” option is selected for ISO sensitivity (0 135), the camera will automatically adjust sensitivity within the selected range if
optimal exposure can not be achieved at the selected shutter speed or
aperture.

Image Quality
Choose a file format and compression ratio for photographs.
Option

File type

NEF (RAW)

NEF

JPEG fine
JPEG normal

JPEG

JPEG basic
NEF (RAW) +
JPEG fine

NEF/
JPEG

Description
Compressed 12-bit raw data from the image sensor
are saved directly to the memory card. White balance, contrast, and other settings can be adjusted
on a computer after shooting.
Record JPEG images at a compression ratio of
roughly 1 : 4 (fine quality).
Record JPEG images at a compression ratio of
roughly 1 : 8 (normal quality).
Record JPEG images at a compression ratio of
roughly 1 : 16 (basic quality).
Two images are recorded: one NEF (RAW) image
and one fine-quality JPEG image.

Image Size
Choose the size of photographs taken in still image and Smart
Photo Selector modes.
Option
Size (pixels) Approximate print size at 300 dpi (cm/in.) *
# 4608×3072; 14.2 M 4608 × 3072
39 × 26/15.4 × 10.2
$ 3456×2304; 8.0 M 3456 × 2304
29.3 × 19.5/11.5 × 7.7
% 2304×1536; 3.5 M 2304 × 1536
19.5 × 13/7.7 × 5.1
* Print size in inches equals image size in pixels divided by printer resolution
in dots per inch (dpi; 1 inch=approximately 2.54 cm).

123

A NEF (RAW)/NEF (RAW) + JPEG

The option selected for image size does not affect the size of NEF (RAW)
images. NEF (RAW) images can be viewed on the camera or using software such as Capture NX 2 (available separately; 0 171) or ViewNX 2
(supplied).
When photographs taken at NEF (RAW) + JPEG are viewed on the camera, only the JPEG image will be displayed. When photographs taken at
these settings are deleted, both NEF and JPEG images will be deleted.

A File Names

Photos and movies are stored as image files with names of the form
“xxx_nnnn.yyy,” where:
• xxx is either NMS (Motion Snapshots recorded with NMS file selected
for File format; 0 128) or DSC (photos, MOV-format Motion Snapshots, and movies, including copies created with Edit movie; 0 116),
• nnnn a four-digit number between 0001 and 9999 assigned automatically in ascending order by the camera, and
• yyy one of the following three letter extensions: “NEF” for NEF (RAW)
images, “JPG” for JPEG images, or “MOV” for movies.
The NEF and JPEG files recorded at settings of NEF (RAW)+JPEG have
the same file names but different extensions. Trimmed copies created
with Edit movie (0 116) have file names beginning with “DSC”; copies
created with the other retouch options in the playback menu have file
names beginning with “CSC” (e.g., “CSC_0001.JPG”). Images recorded
with Adobe RGB selected for Color space (0 143) have names that
begin with an underscore (e.g., “_DSC0001.JPG”).

A Image Quality and Size

Together, image quality and size determine how much space each photograph occupies on the memory card. Larger, higher quality images
can be printed at larger sizes but also require more memory, meaning
that fewer such images can be stored on the memory card (0 186).

124

Continuous
Choose the frame rate for continuous shooting (0 63) from 5,
15, 30, and 60 fps. An electronic shutter is used at rates of 15 fps
and above; except when On is selected for Silent photography,
a mechanical shutter is used when 5 fps is selected.

Silent Photography
Select On to reduce camera noise in quiet surroundings. The
camera uses an electronic shutter and silences the sounds produced when the camera controls are operated. Selecting Off
restores normal operation.

Number of Shots Saved
Choose the number of shots selected by the Smart Photo Selector. If 5 is selected, the camera will save the best shot and 4 best
shot candidates. If 1 is selected, the camera will save only the
best shot.

Frame Rate
Choose a frame rate for slow motion movies (0 53). The faster
the frame rate, the smaller the frame size.
Option
400 fps
1200 fps

Frame size (pixels)
640 × 240
320 × 120

Bit rate
(approx.)
2 Mbps
1 Mbps

Maximum length Maximum length
(shooting)
(playback) *
3 seconds
40 seconds
3 seconds
2 minutes

* All figures are approximate. Slow motion movies will play back over a period
of about 13.2 (400 fps) or 40 (1200 fps) times the recording time.

A See Also

For information on the total length of movies that can be stored on the
memory card, see page 187.

125

Movie Settings
Choose a frame size and frame rate for HD movies (0 49).
Option
Frame size (pixels) Recording rate
t 1080/60i
59.94 fields/s *
1920 × 1080
r 1080/30p
29.97 fps
u 720/60p
59.94 fps
1280 × 720
s 720/30p
29.97 fps

Bit rate
(approx.) Maximum length
24 Mbps
20 minutes
24 Mbps
16 Mbps
29 minutes
12 Mbps

* Sensor output is about 60 fps.

A Photo Frame Size

Photographs recorded by pressing the shutter-release button all the
way down during movie recording have an aspect ratio of 3 : 2. The
frame size varies with the option selected for Movie settings:
• 1080/60i and 1080/30p: 4608 × 3072
• 720/60p and 720/30p: 1280 × 865

A See Also

For information on the total length of movies that can be stored on the
memory card, see page 187.

126

Movie Before/After
Choose whether the movie portions of Motion Snapshots end
when the shutter-release button is pressed all the way or about
0.6 s after (0 59).
Movie footage starts about a second before the shutterrelease button is pressed all the way down and ends about
0.6 s after.
Shutter-release button
Shutter-release button
pressed halfway
pressed all the way down
1.0 s : 0.6 s

1.0 s

0.6 s

Movie footage
The camera records about 1.6 s of movie footage, ending
when the shutter-release button is pressed all the way down.
Shutter-release button
Shutter-release button
pressed halfway
pressed all the way down
1.6 s : 0 s

1.6 s
Movie footage

127

File Format
Choose the file format for Motion Snapshots (0 59).
Motion Snapshots are recorded as a 4 s MOV file and a JPEG
NMS file image. Motion Snapshots can only be viewed on the camera or
using ViewNX 2.
Motion Snapshots are recorded as a 10 s MOV file that can be
viewed in a variety of computer applications. The Motion SnapMOV file shot is not displayed automatically when shooting ends (0 60);
for information on viewing Motion Snapshot movies, see page
56.

Metering
Choose how the camera sets exposure.
The camera meters a wide area of the frame and adjusts for
contrast (tone distribution), color, composition, and subject
distance, producing natural results in most situations.
The camera meters the entire frame but assigns the greatest
Center- weight to the center area. This is the classic meter for porM
weighted traits and is recommended if you are using filters with an
exposure factor (filter factor) over 1×.
The camera meters the current focus area; use to meter offcenter subjects (if Auto-area is selected for AF-area mode
as described on page 153, the camera will meter the center
focus area, while during face priority the camera will meter
N Spot
the focus area closest to the center of the selected face;
0 27). Spot metering ensures that the subject will be correctly exposed, even when framed against a background
that is much brighter or darker.
L Matrix

128

A Metering and Shooting Mode

In auto and best moment capture modes, and when h Scene auto
selector (0 122) is chosen in Motion Snapshot mode, metering is
adjusted automatically according to the scene.

Autoexposure Lock
Exposure lock is used to recompose photographs after metering
exposure. It is most effective when used with center-weighted
or spot metering (0 128) to frame off-center subjects that are
much brighter or darker than their surroundings or to optimize
exposure for an object other than your main subject.

1 Meter exposure.

Position the subject in the center of
the frame and press the shutterrelease button halfway to meter exposure. Check that the focus area is displayed in green.

2 Lock exposure.

With the shutter-release button
pressed halfway and the subject positioned in the focus area, press 1 (A)
to lock exposure. While exposure lock
is in effect, an AE-L/AF-L indicator will be
displayed. Exposure will remain
locked until 1 (A) is pressed again,
even if you later remove your finger
from the shutter-release button.

A See Also

For information on changing the role of
the 1 (A) button, see page 163.

3 Recompose the photograph.

Recompose the photograph and shoot. To end exposure lock,
press 1 (A) again.
129

White Balance
White balance ensures that colors are unaffected by the color of
the light source. Auto white balance is recommended for most
light sources, but other values can be selected if necessary
according to the type of source.
v Auto
J
I
H
N
G
M
L

Incandescent
Fluorescent
Direct sunlight
Flash
Cloudy
Shade
Preset manual

Automatic white balance adjustment. Recommended in most situations.
Use under incandescent lighting.
Use with cool-white fluorescent lighting.
Use with subjects lit by direct sunlight.
Use with built-in or optional flash units.
Use in daylight under overcast skies.
Use in daylight with subjects in the shade.
Measure white balance (0 132).

A White Balance and Shooting Mode

In auto and best moment capture modes, and when h Scene auto
selector (0 122) is chosen in Motion Snapshot mode, white balance is
adjusted automatically according to the scene.

130

Fine-Tuning White Balance
Options other than Preset manual can be fine-tuned as follows:

1 Display fine-tuning options.

Highlight an option other than Preset
manual and press 2 to display the
fine-tuning options shown at right.

Coordinates

Adjustment

2 Fine-tune white balance.

Use the multi selector to fine-tune white balance.
Increase green

Increase blue

Increase amber

Increase magenta

A White Balance Fine Tuning

The colors on the fine-tuning axes are relative, not absolute. For
example, moving the cursor to B (blue) when a “warm” setting such
as J (incandescent) is selected will make photographs slightly
“colder” but will not actually make them blue.

3 Save changes and exit.

Press J. An asterisk will appear next to the white balance
icon (0 4) in the detailed display (0 5) to show that white
balance has been altered from default values.

131

Preset Manual
Preset manual is used to record and recall custom white balance
settings for shooting under mixed lighting or to compensate for
light sources with a strong color cast.

1 Light a reference object.

Place a neutral gray or white object under the lighting that
will be used in the final photograph. A standard gray panel
can be used for increased precision.

2 Select Preset manual.

Highlight Preset manual in the white
balance menu and press 2. The dialog
shown at right will be displayed; highlight Yes and press J to overwrite the
existing value for preset manual white
balance.
The message shown at right will be
displayed.

132

3 Measure white balance.

When the camera is ready to measure
white balance, a flashing L will be
displayed. Before the indicator stops
flashing, frame the reference object so
that it fills the display and press the
shutter-release button all the way
down. No photograph will be
recorded; white balance can be measured accurately even when the camera is not in focus.

4 Check the results.

If the camera was able to measure a
value for white balance, the message
shown at right will be displayed. To
return to shooting mode immediately,
press the shutter-release button halfway.

If lighting is too dark or too bright, the
camera may be unable to measure
white balance. The message at right
will be displayed. Return to Step 3 and
measure white balance again.

133

D Auto Power Off

White balance measurement will end without a new value being
acquired if no operations are performed for the time selected for Auto
power off in the setup menu (0 162; the default is 1 minute).

D Preset White Balance

The camera can store only one value for preset white balance at a time;
the existing value will be replaced when a new value is measured. Note
that exposure is automatically increased by 1 EV when measuring
white balance; in mode w, adjust exposure so that the exposure indicator shows ±0 (0 37).

A Color Temperature

The perceived color of a light source varies with the viewer and other
conditions. Color temperature is an objective measure of the color of a
light source, defined with reference to the temperature to which an
object would have to be heated to radiate light in the same wavelengths. While light sources with a color temperature in the neighborhood of 5000–5500 K appear white, light sources with a lower color
temperature, such as incandescent light bulbs, appear slightly yellow
or red. Light sources with a higher color temperature appear tinged
with blue. The camera white balance options are adapted to the following color temperatures (all figures are approximate):

• Sodium-vapor lamps: 2700 K
• J (incandescent)/
Warm-white fluorescent: 3000 K
• White fluorescent: 3700 K
• I Cool-white fluorescent: 4200 K
• Day white fluorescent: 5000 K

134

• H (direct sunlight): 5200 K
• N (flash): 5400 K
• G (cloudy): 6000 K
• Daylight fluorescent: 6500 K
• Mercury-vapor lamps: 7200 K
• M (shade): 8000 K

ISO Sensitivity
The higher the ISO sensitivity, the less light needed to make an
exposure, allowing faster shutter speeds or smaller apertures,
but the more likely the image is to be affected by “noise” in the
form of randomly-spaced bright pixels, fog, or lines.
The camera adjusts ISO sensitivity in response to
q Auto (160–6400) lighting conditions. ISO sensitivity is adjusted in
x Auto (160–3200) the range given in brackets; choose larger ranges
w Auto (160–800) for increased sensitivity when lighting is poor,
smaller ranges to reduce noise.
160, 200, 400, 800,
ISO sensitivity is fixed at the selected value.
1600, 3200, 6400

A “Auto” ISO Sensitivity Options

When auto ISO sensitivity control is in effect,
the display shows an ISO-AUTO icon and the
current ISO sensitivity.

135

Picture Control
Choose how the camera processes photographs.
Standard processing for balanced results. Recommended in most situations.
Minimal processing for natural results. Choose for
R Neutral
photographs that will later be extensively processed
or retouched.
Pictures are enhanced for a vivid, photoprint effect.
S Vivid
Choose for photographs that emphasize primary colors.
T Monochrome Take monochrome photographs.
Process portraits for natural texture and a rounded
e Portrait
feel.
Take vibrant photographs of landscapes and cityf Landscape
scapes.
Q Standard

Modifying Picture Controls
Existing preset and custom Picture Controls (0 140) can be
modified to suit the scene or your creative intent.

1 Display options.

Highlight an item in the Picture Control menu and press 2 to display Picture Control settings (0 138; the
settings available with custom Picture
Controls are the same as the preset
controls on which they are based). To
use an unmodified Picture Control, highlight it and press J.

136

2 Adjust settings.

Press 1 or 3 to highlight the desired
setting and press 4 or 2 to choose a
value. Repeat this step until all settings have been adjusted, or select
Quick adjust to choose a preset combination of settings.
Default settings can be restored by pressing the O button.

3 Save changes and exit.
Press J.

A Preset Picture Controls Versus Custom Picture Controls

The Picture Controls supplied with the camera are referred to as preset
Picture Controls. Custom Picture Controls are created through modifications to existing Picture Controls using the Custom Picture Control
option in the shooting menu (0 140). If desired, custom Picture Controls can be saved to a memory card and copied to other Nikon 1 V2
cameras or loaded into compatible software (0 141).

A Modified Picture Controls

Picture Controls that have been modified
from default settings are indicated by asterisks (“*”) next to the Picture Control name and
icon in the Picture Control menu (0 136) and
next to the Picture Control icon (0 4) in the
detailed display (0 5).

A Picture Control and Shooting Mode

In auto and best moment capture modes, and when h Scene auto
selector (0 122) is chosen in Motion Snapshot mode, the camera automatically chooses a Picture Control according to the scene.

137

❚❚ Picture Control Settings

Manual adjustments
(all Picture Controls)

Choose from options between –2 and +2 to reduce or
exaggerate the effect of the selected Picture Control
(note that this resets all manual adjustments). For
Quick adjust
example, choosing positive values for Vivid makes pictures more vivid. Not available with Neutral, Monochrome, or custom Picture Controls.
Control the sharpness of outlines. Select A to adjust
sharpening automatically according to the type of
Sharpening scene, or choose from values between 0 (no sharpening) and 9 (the higher the value, the greater the sharpening).
Select A to adjust contrast automatically according to
the type of scene, or choose from values between –3
and +3 (lower values prevent highlights in portrait subContrast
jects from being “washed out” in direct sunlight, while
higher values preserve detail in misty landscapes and
other low-contrast subjects).
Choose –1 for reduced brightness, +1 for enhanced
Brightness
brightness. Does not affect exposure.
Control the vividness of colors. Select A to adjust saturation automatically according to the type of scene, or
Saturation
choose from values between –3 and +3 (lower values
reduce saturation and higher values increase it).
Choose negative values (to a minimum of –3) to make
reds more purple, blues more green, and greens more
Hue
yellow, positive values (up to +3) to make reds more
orange, greens more blue, and blues more purple.
Simulate the effect of color filters on monochrome phoFilter
tographs. Choose from Off, yellow, orange, red, and
effects
green (0 139).
Choose the tint used in monochrome photographs
from B&W (black-and-white), Sepia, Cyanotype (blueToning
tinted monochrome), Red, Yellow, Green, Blue Green,
Blue, Purple Blue, and Red Purple (0 139).

Manual adjustments
(non-monochrome only)

138

Manual adjustments
(monochrome only)

D “A” (Auto)

Results for auto sharpening, contrast, and saturation vary with exposure and the position of the subject in the frame.

A The Picture Control Grid

Pressing the command dial in Step 2 displays
a Picture Control grid showing the contrast
and saturation for the selected Picture Control in relation to the other Picture Controls
(only contrast is displayed when Monochrome is selected). Release the dial to
return to the Picture Control menu.
The icons for Picture Controls that use auto
contrast and saturation are displayed in
green in the Picture Control grid, and lines
appear parallel to the axes of the grid.

A Previous Settings

The line under the value display in the Picture
Control setting menu indicates the previous
value for the setting. Use this as a reference
when adjusting settings.

A Filter Effects (Monochrome Only)

The options in this menu simulate the effect of color filters on monochrome photographs. The following filter effects are available:
Y (yellow)
O (orange)
R (red)
G (green)

Enhance contrast. Can be used to reduce the brightness
of the sky in landscape photographs. Orange produces
more contrast than yellow, red more contrast than orange.
Softens skin tones. Can be used for portraits.

Note that the effects achieved with Filter effects are more pronounced
than those produced by physical glass filters.

A Toning (Monochrome Only)

Pressing 3 when Toning is highlighted displays saturation options. Press 4 or 2 to
adjust saturation. Saturation control is not
available when B&W (black-and-white) is
selected.

139

Custom Picture Control
The Picture Controls supplied with the camera can be modified
and saved as custom Picture Controls.

Edit/Save
To create a custom Picture Control, select Edit/save and follow
the steps below.

1 Select a Picture Control.

Highlight an existing Picture Control
and press 2, or press J to proceed to
Step 3 to save a copy of the highlighted Picture Control without further modification.

2 Edit the selected Picture Control.

See page 138 for more information. To
abandon any changes and start over
from default settings, press the O button. Press J when settings are complete.

3 Save the Picture Control.

Highlight a destination (C-1 through
C-9) and press J to save the custom
Picture Control and return to the
shooting menu.

140

The new Picture Control will be listed
in the Picture Control menu.

Load from/Save to Card
Custom Picture Controls created using the Picture Control Utility
available with ViewNX 2 or optional software such as
Capture NX 2 can be copied to a memory card and loaded into
the camera, or custom Picture Controls created with the camera
can be copied to the memory card to be used in other
Nikon 1 V2 cameras and compatible software and then deleted
when no longer needed.
To copy custom Picture Controls to or from the memory card, or
to delete custom Picture Controls from the memory card, select
Load from/save to card in the Custom Picture Control menu.
The following options will be displayed:
Copy custom Picture Controls from the memory card to
custom Picture Controls C-1 through C-9.
Delete selected custom Picture
Controls from the memory
card. The confirmation dialog
shown at right will be disDelete from card
played before a Picture Control
is deleted; to delete the
selected Picture Control, highlight Yes and press J.
Copy a custom Picture Control (C-1 through C-9) to a
Copy to card
selected destination (1 through 99) on the memory card.
Copy to camera

A Copy to Card

Up to 99 custom Picture Controls can be stored on the memory card at
any one time. The memory card can only be used to store user-created
custom Picture Controls. The preset Picture Controls supplied with the
camera can not be copied to the memory card or deleted.

A Custom Picture Control > Delete

The Delete option in the Custom Picture Control menu can be used to
delete selected custom Picture Controls from the camera when they
are no longer needed.

141

Auto Distortion Control
Select On to reduce barrel distortion in photos taken with wideangle lenses and to reduce pin-cushion distortion in photos
taken with long lenses (note that the edges of photographs may
be cropped out, and that there may be an increase in the time
needed to process images before they are saved). This option is
available only with 1 NIKKOR lenses and not with other NIKKOR
lenses attached using the FT1 mount adapter. Results are not
guaranteed with third-party lenses.

142

Color Space
The color space determines the gamut of colors available for
color reproduction. Choose sRGB for photos that will be used
“as is,” with no further modification, Adobe RGB for photos that
will be extensively processed or retouched after leaving the
camera. Note that regardless of the option selected, sRGB is
used for movies and Motion Snapshots and for photos taken
during movie recording.

A Color Space

Color spaces define the correspondence between colors and the
numeric values by which they are represented in a digital image file.
The sRGB color space is widely used, while Adobe RGB is typically used
in publishing and commercial printing. sRGB is recommended when
taking photographs that will be printed without modification or
viewed in applications that do not support color management, or
when taking photographs that will be printed with ExifPrint, the direct
printing option on some household printers, or kiosk printing or other
commercial print services. Adobe RGB photographs can also be
printed using these options, but colors will not be as vivid.
JPEG photographs taken in the Adobe RGB color space are DCF compliant; applications and printers that support DCF will select the correct
color space automatically. If the application or device does not support
DCF, select the appropriate color space manually. For more information, see the documentation provided with the application or device.

A Nikon Software

ViewNX 2 (supplied) and Capture NX 2 (available separately) automatically select the correct color space when opening photographs created
with this camera.

143

Active D-Lighting
Active D-Lighting preserves details in highlights and shadows
for natural contrast. Use with high contrast scenes such as a
brightly lit outdoor view framed in a door or window or a subjects in the shade on a sunny day. It is most effective when used
with Matrix metering (0 128).

Active D-Lighting: Off

Active D-Lighting: Y On

D Active D-Lighting

Noise (randomly-spaced bright pixels, fog, or lines) may appear in photographs taken with Active D-Lighting. Uneven shading may be visible
with some subjects.

A “Active D-Lighting” Versus “D-Lighting”

The Active D-Lighting option in the shooting menu adjusts exposure
before shooting to optimize the dynamic range, while the D-Lighting
option in the playback menu (0 113) brightens shadows in images
after shooting.

144

HDR (High Dynamic Range)
Select On to preserve details in high-contrast scenes. Each time
a picture is taken, the camera quickly takes 2 shots at different
exposures and combines them to capture a wide range of tones,
from shadows to highlights. While the shots are combined, a
message is displayed and the shutter release is disabled. The
final photograph is displayed when processing is complete.

+
First exposure (darker)

Second exposure
(brighter)

Combined HDR image

While HDR is in effect, Z appears in the display and continuous
shooting (0 63) is disabled.

D HDR

The edges of the image will be cropped out and neither the built-in
flash nor optional flash units will fire. The desired results may not be
achieved if the camera or subject moves during shooting. Depending
on the scene, shading may be uneven and shadows may appear
around bright objects or halos around dark objects.

145

Long Exposure NR
Photographs taken at slow shutter speeds are automatically processed to reduce “noise” (bright spots, randomly-spaced bright
pixels, or fog), slightly increasing recording times. Selecting On
increases the amount of noise reduction performed at shutter
speeds slower than 1 s and increases the time required to record
images by roughly 1.5 to 2 times. During processing, a warning
will be displayed and pictures can not be taken (if the camera is
turned off before processing is complete, the picture will be
saved but noise reduction will not be performed). In continuous
release mode, frame rates will slow and while photographs are
being processed, the capacity of the memory buffer will drop.

High ISO Noise Reduction
Select On to reduce “noise” (randomly-spaced bright pixels,
lines, or fog). If Off is selected, noise reduction will only be performed at high ISO sensitivities; the amount of noise reduction is
less than that performed when On is selected.

146

Movie Sound Options
Adjust movie sound recording settings for the built-in microphone and optional ME-1 external microphones.
❚❚ Microphone
Select Microphone off to disable sound recording. Selecting
any other option enables recording and sets the microphone to
the selected sensitivity.

A The 2 Icon

Movies recorded with the microphone off are indicated by a 2 icon in
full-frame and movie playback.

❚❚ Wind Noise Reduction
Select On to enable the low-cut filter, reducing noise produced
by wind blowing over the microphone (note that other sounds
may also be affected).

A Wind Noise Reduction

To disable wind noise reduction when using an optional ME-1 stereo
microphone, slide the microphone low-cut filter switch to FLAT and
select Off for Wind noise reduction.

147

Vibration Reduction
This option is available with 1 NIKKOR lenses that support vibration reduction (VR). The options available vary with the type of
lens: Normal/Active/Off for lenses that support active vibration
reduction and On/Off for other VR lenses. Choose Active, Normal, or On to reduce the effects of vibration; choose Active
when shooting from a moving vehicle or while walking or for
other forms of strong camera shake, Normal for the relatively
mild camera shake that occurs while standing still.

A Vibration Reduction

When the camera is panned, vibration reduction applies only to motion
that is not part of the pan (if the camera is panned horizontally, for
example, vibration reduction will be applied only to vertical shake),
making it much easier to pan the camera smoothly in a wide arc. The
composition may appear to change after the shutter is released, but
this does not indicate a malfunction.

148

Focus Mode
Choose how the camera focuses.
AF-A
AF-S

AF-C

AF-F
MF

Auto-select AF: The camera automatically selects AF-S if the subject is
stationary, AF-C if it is moving.
Single AF: For stationary subjects. Focus locks when the shutterrelease button is pressed halfway. *
Continuous AF: For subjects in motion. The
camera focuses continuously on the subject in the AF area brackets while the
shutter-release button is pressed halfway (note that the AF area brackets are
only shown in the detailed display; 0 5).
Photos can be taken whether or not the
AF area brackets
camera is in focus.
Full-time AF: For subjects in motion. The camera focuses continuously; photos can be taken whether or not the camera is in focus.
Manual focus: Focus manually (0 151). Photos can be taken whether
or not the camera is in focus.

* Shutter can only be released if camera is able to focus.

A Focus Mode

The options available vary with the shooting mode.
Shooting mode
t, u, v, w
Advanced movie HD movie
mode
Slow motion

Focus mode
AF-A (default), AF-S, AF-C, MF
AF-F (default), AF-S, MF
AF-S (default), MF

149

A Getting Good Results with Autofocus

Autofocus does not perform well under the conditions listed below.
The shutter release may be disabled if the camera is unable to focus
under these conditions, or the focus area may be displayed in green
and the camera may sound a beep, allowing the shutter to be released
even when the subject is not in focus. In these cases, focus manually
(0 151) or use focus lock (0 154) to focus on another subject at the
same distance, and then recompose the photograph.

There is little or no contrast between
the subject and the background.
Example: The
subject is the
same color as
the background.
The subject contains objects at different distances from the camera.
Example: The
subject is
inside a cage.

The subject is dominated by regular
geometric patterns.
Example: Blinds
or a row of
windows in a
skyscraper.

150

The subject contains areas of sharply
contrasting brightness.
Examples: The
subject is half
in the shade; a
night scene
with point illumination.
Background objects appear larger
than the subject.
Example: A
building is in
the frame
behind the
subject.
The subject contains many fine details
or is made up of objects that are small
or lack variation in brightness.
Example: A field
of flowers.

A The AF-Assist Illuminator

If the subject is poorly lit, the AF-assist illumiAF-assist illuminator
nator will light automatically to assist the
autofocus operation when the shutterrelease button is pressed halfway. The AFassist illuminator does not light in advanced
movie mode or during movie recording; in
other situations it lights only if:
• AF-S is selected for focus mode or single AF
selected in AF-A focus mode,
• Auto-area is selected for AF-area mode (0 153) or the center focus
area (0 153) is selected for Single-point, and
• On is selected for Built-in AF assist in the shooting menu (0 156).
Larger lenses may prevent the illuminator lighting all or part of the subject. Remove lens hoods when using the illuminator.

Manual Focus
Manual focus can be used when autofocus does not produce the
desired results.

1 Select manual focus.

Select Manual focus for Focus mode
(0 149).

2 Display the manual focus guides.

Press J to magnify the view at the
center of the frame and display manual focus guides (this feature is not
available during movie recording or in
slow-motion movie mode).

151

3 Focus.

Rotate the multi selector until the subject is in focus. Rotate the multi selector clockwise to increase the focus
distance, counterclockwise to
decrease; the faster you rotate the
multi selector, the quicker the focus
distance changes. The focus indicator
shows the approximate focus distance. Press J when the subject is in
focus.

To magnify the view in the display by
up to about 10× for precise focus,
rotate the command dial right. Press
1, 2, 3, or 4 to view areas of the
frame not currently visible in the display; the visible portion is shown by
the navigation window. To zoom out,
rotate the command dial left.

Multi selector dial: Focus

Command dial:
Zoom in or out
Focus indicator

Navigation window

A Movies

The multi selector can also be used to choose the focus distance if manual focus is selected during movie recording. Rotate the multi selector
clockwise to increase the focus distance, counterclockwise to decrease;
the faster you rotate the multi selector, the quicker the focus distance
changes.

A Focal Plane Position

152

To determine the distance between your
subject and the camera, measure from the
focal plane mark on the camera body. The
distance between the lens mounting flange
and the focal plane is approximately 17 mm
(0.7 in.).

Approx.
17 mm

Focal plane mark

AF-Area Mode
Choose how the focus area for autofocus is selected.
The camera automatically detects the subject and selects
the focus area.
Press J to view the focus area
selection display, then use the
multi selector to position the
Single- focus area over your subject
c
point
and press J; the camera
focuses on the subject in the
Focus area
selected focus area only. Use
with stationary subjects.
Focus area
Press J to view the focus area
selection display, then use the
multi selector to position the
focus area over your subject
and press J. The focus area
will track the subject as it
Subject
moves through the area shown
9
tracking
at right. The camera will focus
Subject tracking area
on the selected subject when
the shutter-release button is
pressed halfway. To end focus
tracking when shooting is
complete, press J.
e

Autoarea

A Subject Tracking

The camera may be unable to track subjects if they move quickly, leave
the frame or are obscured by other objects, change visibly in size, color,
or brightness, or are too small, too large, too bright, too dark, or similar
in color or brightness to the background.

153

Focus Lock
Focus lock can be used to change the composition after focusing
on the subject in the center of the frame, allowing you to focus
on a subject that will not be in the center of the final composition. If the camera is unable to focus using autofocus (0 150),
you can also focus on another subject at the same distance and
then use focus lock to recompose the photograph. Focus lock is
most effective when an option other than Auto-area is selected
for AF-area mode (0 153).

1 Focus.

Position the subject in the center of
the frame and press the shutterrelease button halfway to initiate
focus. Check that the focus area is displayed in green. If AF-S is selected for
focus mode (0 149), focus will lock
while the shutter-release button is
pressed halfway.

154

2 Lock focus.

With the shutter-release button
pressed halfway, press 1 (A) to lock
both focus and exposure (an AE-L/AF-L
indicator will be displayed; 0 129).
Focus will remain locked until 1 (A)
is pressed again, even if you later
remove your finger from the shutterrelease button.

A See Also

For information on changing the role of
the 1 (A) button, see page 163.

3 Recompose the photograph and shoot.
Focus will remain locked between
shots.

Do not change the distance between the camera and the subject while focus lock is in effect. If the subject moves, press
1 (A) to end focus lock and then focus again at the new distance.

155

Face-Priority
Choose On to enable face priority (0 27).

Built-in AF Assist
When On is selected, the built-in AFassist illuminator will light to illuminate
poorly-lit subjects if:
• AF-S is selected for focus mode (0 149)
or single AF is selected in AF-A, and
• Auto-area is selected for AF-area
mode (0 153) or the center focus area
is selected for Single-point.

AF-assist illuminator

The AF-assist illuminator will not light to assist the focus operation in advanced movie mode, during movie recording, or when
Off is selected. If the AF-assist illuminator does not light, autofocus may not produce the desired results when lighting is poor.

A See Also

See page 151 for information on using the AF-assist illuminator. Information on the modes in which AF-assist is available may be found on
page 181.

156

Flash Control
Choose a flash control mode for the built-in and optional flash
units.
1 TTL

2 Manual

Flash output is adjusted automatically in response to shooting conditions (TTL flash control).
Choose a flash level between Full
and 1/32 (1/32 of full power). At full
power, the built-in flash has a guide
number of about 5/16 (m/ft, ISO
100, 20 °C/68 °F; at ISO 160, the
guide number is about 6.3/20.7).
A Y icon flashes in the display
during flash photography when
this option is selected.

157

Flash Compensation
Flash compensation alters flash output from the level suggested
by the camera, changing the brightness of the main subject relative to the background. Choose from values between –3 EV
(darker) and +1 EV (brighter) in increments of 1/3 EV; in general,
positive values make the subject brighter while negative values
make it darker.
A Y icon is displayed when flash compensation is in effect. Normal flash output can be restored by setting flash
compensation to ±0. Flash compensation is not reset when the camera is
turned off.

158

gThe Setup Menu

To display the setup menu, press G and select the setup
menu tab (B).

G button

The setup menu contains the following options:
Option

Description
Reset setup menu options to
Reset setup options
default values.
Format memory card Format the memory card.
Allow the shutter to be
Slot empty release released when no memory
lock
card is inserted in the camera.
Display brightness Adjust display brightness.
Grid display
Display a framing grid.
Choose the auto power off
Auto power off
delay.
Self-timer
Choose the self-timer delay.
Choose the remote control
Remote control
mode shutter-release delay.
Choose how long the camRemote on duration era waits for a signal from
an ML-L3 remote control.
Assign AE/AF-L
Choose the role played by
button
the 1 (A) button.
Choose whether exposure
Shutter button AE locks when the shutterlock
release button is pressed
halfway.

Default

—

160

—

161

Release locked

161

0
Off

161
162

1 min

162

10 s

162

Quick response

163

10 min

163

AE/AF lock

163

Off

163

159

Option

Description
Default
Choose whether remote
controls for HDMI-CEC
devices to which the camHDMI device control
On
era is connected can be
used to operate the camera.
Flicker reduction
Reduce flicker or banding.
—
Reset file numbering Reset file numbering.
—
Time zone and date Set the camera clock.
Daylight saving time: Off
Choose a language for the
Language
—
camera displays.
Record camera orientation
Auto image rotation
On
with pictures.
Wireless mobile
Enable or disable the wire—
adapter
less mobile adapter.
Adjust settings for optional Auto power off: Disable
GPS
GPS units.
Use GPS to set clock: Yes
Check and optimize the
Pixel mapping
camera image sensor and
—
image processors.
Display the current firm—
Firmware version
ware version.

101

164
164
165
165
166
79
77
167
167

Reset Setup Options
Select Yes to reset all setup menu options other than Flicker
reduction, Time zone and date, and Language to default values.

160

Format Memory Card
Select Yes to format the memory card. Note that this permanently
deletes all data on the card, including protected images; before
proceeding, be sure to copy important pictures and other data
to a computer (0 95). To exit without formatting the memory
card, highlight No and press J.
The message shown at right is displayed
while the card is formatted; do not remove
the memory card or remove or disconnect
the power source until formatting is complete.

Slot Empty Release Lock
If Enable release is selected, the shutter can be released when
no memory card is inserted. No pictures will be recorded,
although they will be displayed in demo mode. Select Release
locked to enable the shutter only when a card is inserted.

Display Brightness
Highlight Monitor brightness or Viewfinder brightness and press 2 to display
brightness options for the selected display. Brightness can then be adjusted by
pressing 1 or 3; choose higher values
for increased brightness, lower values for
reduced brightness.

161

Grid Display
Select On to display a framing grid (0 6).

Auto Power Off
Choose how long the displays remain on
when no operations are per formed
(0 18). Choose shorter delays to reduce
the drain on the battery. Once the displays have turned off, they can be reactivated by operating the camera buttons
or mode dial.

A The GP-N100

To enable auto power off when an optional GP-N100 GPS unit is
attached, select Enable for the GPS > Auto power off option in the
setup menu (0 76).

Self-Timer
Choose the length of the self-timer shutter-release delay (0 65).
Choose 2 s to reduce blur caused by the camera moving when
the shutter-release button is pressed, 10 s for self-portraits.

162

Remote Control
Choose how the camera responds to the shutter-release button
on the optional ML-L3 remote control (0 65). If Quick response
is selected, the shutter will be released immediately; if 2 s delay
is selected, the shutter will be released after a 2 s delay.

Remote on Duration
Choose how long the camera will remain
active while waiting for a signal from the
remote control (0 63). Choose a shorter
delay to reduce the drain on the battery.
Note that remote control mode must be
reselected once the timer has expired.

Assign AE/AF-L Button
Choose whether the 1 (A) button locks
both focus and exposure (AE/AF lock),
exposure only (AE lock only), or focus
only (AF lock only). Focus lock is
described on page 154, exposure lock on
page 129.

1 (A) button

Shutter Button AE Lock
If On is selected, exposure will lock while
the shutter-release button is pressed
halfway.

163

Flicker Reduction
Reduce flicker and banding in the displays and in movies while
shooting under fluorescent or mercury-vapor lighting. Choose a
frequency which matches that of the local AC power supply.

A Flicker Reduction

If you are unsure as to the frequency of the local power supply, test
both options and choose the one that produces the best results. Flicker
reduction may not produce the desired results if the subject is very
bright, in which case you should select mode v or w and choose a
smaller aperture (larger f-number).

Reset File Numbering
When a photograph is taken or a movie is
recorded, the camera names the file by
adding one to the number of the previous file (0 124). If the current folder is
numbered 999 and contains either 999
photographs or a photograph numbered
9999, the shutter-release button will be disabled and no further
photographs can be taken. To reset file numbering to 0001,
select Yes for Reset file numbering and then either format the
current memory card or insert a new memory card.

164

Time Zone and Date
Change time zones, set the camera clock,
choose the date display order, or turn
daylight saving time on or off (0 19).

Choose a time zone. The camera clock is automatically set
to the time in the new time zone.
Date and time Set the camera clock.
Choose the order in which the day, month, and year are
Date format
displayed.
Turn daylight saving time on or off. The camera clock will
Daylight
automatically be advanced or set back one hour. The
saving time
default setting is Off.
Time zone

Language
Choose a language for camera messages and displays.

165

Auto Image Rotation
Photographs taken while On is selected contain information on
camera orientation, allowing them to be rotated automatically
during playback or when viewed in ViewNX 2 or Capture NX 2
(available separately; 0 171). The following orientations are
recorded:

Landscape (wide)
orientation

Camera rotated 90°
clockwise

Camera rotated 90°
counterclockwise

Camera orientation is not recorded when Off is selected. Choose
this option when panning or taking photographs with the lens
pointing up or down.

D Auto Image Rotation

Image orientation is not recorded in movie or Motion Snapshot modes.

A Rotate Tall

To automatically rotate “tall” (portrait-orientation) photographs for display during playback, select On for the Rotate tall option in the playback menu (0 112).

166

Pixel Mapping
Check and optimize the camera image sensor and image processors if you notice unexpected bright spots in your pictures (note
that the camera comes with the sensor and processors already
optimized). Before performing pixel mapping as described
below, check that the battery is fully charged.

1 Attach a lens and lens cap.

Turn the camera off and attach a 1 NIKKOR lens. Do not
remove the lens cap.

2 Select Pixel mapping.

Turn the camera on, press G, and select Pixel mapping in
the setup menu.

3 Select Yes.

Pixel mapping begins immediately. Note that other operations can not be performed while pixel mapping is in
progress. Do not turn the camera off or remove or disconnect
the power source until pixel mapping is complete.

4 Turn the camera off.

Turn the camera off when pixel mapping is complete.

Firmware Version
View the current firmware version.

167

168

nTechnical Notes

Read this chapter for information on compatible accessories,
cleaning and storing the camera, and what to do if an error message is displayed or you encounter problems using the camera.

Optional Accessories
At the time of writing, the following accessories were available
for your camera.
Lenses
1 mount lenses
Mount
Mount Adapter FT1: The FT1 allows NIKKOR F mount lenses to be
adapters used with Nikon 1 interchangeable lens format digital cameras. The angle of view of an F mount lens mounted on the
FT1 is equivalent to that of a 35 mm format lens with a focal
length about 2.7 × longer. See page 205 for information on
using the FT1. For information on attaching the FT1 and precautions for use, see the FT1 Mount Adapter User’s Manual. For
information on the lenses that can be used, see Compatible
NIKKOR F Mount Lenses. The FT1 Mount Adapter User’s Manual
and Compatible NIKKOR F Mount Lenses are included with the
FT1.
Power
• Rechargeable Li-ion Battery EN-EL21 (0 12–14): Additional
sources
EN-EL21 batteries are available from local retailers and
Nikon-authorized service representatives.
• Battery Charger MH-28 (0 12): Recharge EN-EL21 batteries.
• Power Connector EP-5D, AC Adapter EH-5b: These accessories can be
used to power the camera for extended periods (EH-5a and
EH-5 AC adapters can also be used). An EP-5D power connector is required to connect the camera to the EH-5b, EH-5a, or
EH-5; see page 174 for details.

n
169

Flash
units

• SB-N5 (0 72): The SB-N5 has a Guide Number of 8.5/27.9 (m/ft,
ISO 100, 20 °C/68 °F; Guide Number at ISO 160 is 10.8/35.4).
When mounted on the Nikon 1 V2, it supports i-TTL and manual flash control (0 157).
• SB-N7 (0 72): The SB-N7 has a Guide Number of 18/59 (m/ft,
ISO 100, 20 °C/68 °F; Guide Number at ISO 160 is 22.8/74.8).
When mounted on the Nikon 1 V2, it supports i-TTL and manual flash control (0 157).
A Guide Number
To calculate the range of the flash at full power, divide the Guide
Number by the aperture. For example, at ISO 100 the SB-N5 has
a Guide Number of 8.5 m or 27.9 ft (35 mm zoom head position);
its range at an aperture of f/5.6 is 8.5÷5.6 or about 1.5 meters (or
in feet, 27.9÷5.6=approximately 5 ft). For each twofold increase
in ISO sensitivity, multiply the Guide Number by the square root
of two (approximately 1.4).

Remote
controls

Wireless Remote Control ML-L3 (0 65): The ML-L3 uses a 3 V CR2025
battery.

Pressing the battery-chamber latch to the right (q), insert a
fingernail into the gap and open the battery chamber (w).
Ensure that the battery is in the correct orientation (r).

n
170

Software Capture NX 2: A complete photo editing package offering such
features as white balance adjustment and color control points.
Note: Use the latest versions of Nikon software; see the websites
listed on page xvii for the latest information on supported operating systems. At default settings, Nikon Message Center 2 will
periodically check for updates to Capture NX 2 and other Nikon
software and firmware while you are logged in to an account on
the computer and the computer is connected to the Internet. A
message is automatically displayed when an update is found.
Body caps Body Cap BF-N1000: The body cap keeps the image sensor free of
dust when a lens is not in place.
MicroStereo Microphone ME-1 (0 147): Connect the ME-1 to the camera
phones microphone jack to record stereo sound while reducing the
noise caused by lens vibration being recorded during autofocus.
GPS units GP-N100 (0 76): Record the time (UTC) and the camera’s current
latitude, longitude, and altitude with every picture taken.
Wireless WU-1b (0 79): Create a wireless connection that can be used by
mobile
smart devices running the Wireless Mobile Adapter Utility to
adapters download pictures or control the camera remotely.

n
171

Approved Memory Cards
The following cards have been tested and approved for use in
the camera. Cards with class 6 or faster write speeds are recommended for movie recording. Recording may end unexpectedly
when cards with slower write speeds are used.
SD cards
SanDisk
Toshiba
2 GB 1
Panasonic
Lexar Media
Platinum II
—
Professional
Full-HD Video

SDHC cards 2
4 GB, 8 GB, 16 GB, 32 GB

SDXC cards 3
64 GB
48 GB, 64 GB

4 GB, 8 GB, 16 GB
4 GB, 8 GB, 16 GB, 32 GB

—

4 GB, 8 GB, 16 GB

1 Check that any card readers or other devices with which the card will be
used support 2 GB cards.
2 Check that any card readers or other devices with which the card will be
used are SDHC-compliant. The camera supports UHS-1.
3 Check that any card readers or other devices with
which the card will be used are SDXC-compliant.
The camera supports UHS-1.

Other cards have not been tested. For more details on the above
cards, please contact the manufacturer.

n
172

Approved Eye-Fi Cards
When inserted in the camera, Eye-Fi cards can be used to upload
photographs to a preselected destination. As of September
2012, the camera supports 8 GB Pro X2 SDHC cards. Eye-Fi cards
are for use only in the country of purchase in accordance with
local regulations. Eye-Fi cards may not be available in some
countries or regions; consult the manufacturer for more information. Be sure the Eye-Fi card firmware has been updated to the
latest version.
Card status is indicated by an icon in the
display:
• f (static): Eye-Fi upload enabled; waiting to begin upload.
• f (animated): Eye-Fi upload enabled;
uploading data.
• e: Eye-Fi upload enabled but no pictures available for upload.
• g: Error.

D Eye-Fi Cards

Note that pictures will not be uploaded if signal strength is insufficient,
and that Eye-Fi upload is disabled during movie recording. In locations
in which wireless devices are prohibited, turn the camera off and
remove the card. See the manual provided with the Eye-Fi card, and
direct any inquiries to the manufacturer.

n
173

Attaching a Power Connector and AC Adapter
Turn the camera off before attaching an optional power connector and AC adapter.

1 Ready the camera.

Open the battery-chamber cover.

2 Insert the EP-5D power connector.

Be sure to insert the connector in the
orientation shown, using the connector to keep the orange battery latch
pressed to one side. The latch locks
the connector in place when the connector is fully inserted.

3 Close the battery-chamber cover.

n
174

4 Connect the AC cable.

Connect the AC adapter AC cable to the AC socket on AC
adapter.

5 Connect the DC cable.

Open the camera power connector
cover and plug the AC adapter DC
cable securely into the DC socket on
the EP-5D. A P icon is displayed in
the monitor when the camera is powered by the AC adapter and power
connector.

n
175

Storage and Cleaning
Storage
If the camera will not be used for an extended period, remove
the battery and store it in a cool, dry area with the terminal cover
in place. To prevent mold or mildew, store the camera in a dry,
well-ventilated area. Do not store your camera with naphtha or
camphor moth balls or in locations that:
• are poorly ventilated or subject to humidities of over 60%
• are next to equipment that produces strong electromagnetic
fields, such as televisions or radios
• are exposed to temperatures above 50 °C (122 °F) or below –10 °C
(14 °F)

Cleaning
Use a blower to remove dust and lint, then wipe gently with
a soft, dry cloth. After using the camera at the beach or seaside, wipe off sand or salt with a cloth lightly dampened in
Camera body
distilled water and dry thoroughly. Important: Dust or other
foreign matter inside the camera may cause damage not covered under warranty.
These elements are easily damaged. Remove dust and lint
with a blower. If using an aerosol blower, keep the can verLens,
tical to prevent the discharge of liquid. To remove fingerviewfinder
prints and other stains, apply a small amount of lens cleaner
to a soft cloth and clean with care.
Remove dust and lint with a blower. When removing fingerprints and other stains, wipe the surface lightly with a soft
Monitor
cloth or chamois leather. Do not apply pressure, as this
could result in damage or malfunction.

Do not use alcohol, thinner, or other volatile chemicals.

n
176

Caring for the Camera and Battery: Cautions
Do not drop: The product may malfunction if subjected to strong shocks or
vibration. Physical shocks may also cause the shutter to malfunction.
Keep dry: This product is not waterproof, and may malfunction if
immersed in water or exposed to high levels of humidity. Rusting of the
internal mechanism can cause irreparable damage.
Avoid sudden changes in temperature: Sudden changes in temperature, such
as those that occur when entering or leaving a heated building on a cold
day, can cause condensation inside the device. To prevent condensation,
place the device in a carrying case or plastic bag before exposing it to
sudden changes in temperature.
Keep away from strong magnetic fields: Do not use or store this device in the
vicinity of equipment that generates strong electromagnetic radiation
or magnetic fields. Strong static charges or the magnetic fields produced
by equipment such as radio transmitters could interfere with the displays, damage data stored on the memory card, or affect the product’s
internal circuitry.
Keep the lens mount covered: Be sure to attach the body cap if the camera is
without a lens.
Do not touch the image sensor: The image sensor is
easily damaged. Under no circumstances
should you exert pressure on the sensor, poke
it with cleaning tools, or subject it to powerful
air currents from a blower. These actions could
scratch or otherwise damage the sensor.
Image sensor
Turn the product off before removing or disconnecting the power source: Do not
unplug the product or remove the battery while the product is on or
while images are being recorded or deleted. Forcibly cutting power in
these circumstances could result in loss of data or in damage to product
memory or internal circuitry. To prevent an accidental interruption of
power, avoid carrying the product from one location to another while
the AC adapter is connected.

n
177

Cleaning: When cleaning the camera body, use a blower to gently remove
dust and lint, then wipe gently with a soft, dry cloth. After using the camera at the beach or seaside, wipe off any sand or salt using a cloth lightly
dampened in pure water and then dry the camera thoroughly.
The lens is easily damaged. Dust and lint should be gently removed with
a blower. When using an aerosol blower, keep the can vertical to prevent
discharge of liquid. To remove fingerprints and other stains from the
lens, apply a small amount of lens cleaner to a soft cloth and wipe the
lens carefully.
Storage: To prevent mold or mildew, store the camera in a dry, well-ventilated area. If you are using an AC adapter, unplug the adapter to prevent
fire. If the product will not be used for an extended period, remove the
battery to prevent leakage and store the camera in a plastic bag containing a desiccant. Do not, however, store the camera case in a plastic bag,
as this may cause the material to deteriorate. Note that desiccant gradually loses its capacity to absorb moisture and should be replaced at regular intervals.
To prevent mold or mildew, take the camera out of storage at least once
a month. Turn the camera on and release the shutter a few times before
putting it away.
Store the battery in a cool, dry place. Replace the terminal cover before
putting the battery away.
Notes on the monitor and viewfinder: These displays are constructed with
extremely high precision; at least 99.99% of pixels are effective, with no
more than 0.01% being missing or defective. Hence while these displays
may contain pixels that are always lit (white, red, blue, or green) or
always off (black), this is not a malfunction and has no effect on images
recorded with the device.
Images in the monitor may be difficult to see in a bright light.

n
178

Do not apply pressure to the displays, as this could cause damage or
malfunction. Dust or lint on the displays can be removed with a blower.
Stains can be removed by wiping lightly with a soft cloth or chamois
leather. Should the monitor or viewfinder break, care should be taken to
avoid injury from broken glass and to prevent liquid crystal from the display touching the skin or entering the eyes and mouth.

Do not leave the lens pointed at the sun: Do not leave the lens pointed at the
sun or other strong light source for an extended period. Intense light
may cause the image sensor to deteriorate or produce a white blur effect
in photographs.
Moiré: Moiré is an interference pattern created by the interaction of an
image containing a regular, repeating grid, such as the pattern of weave
in cloth or windows in a building, with the camera image sensor grid. In
some cases, it may appear in the form of lines. If you notice moiré in your
photographs, try changing the distance to the subject, zooming in and
out, or changing the angle between the subject and the camera.
Lines: Noise in the form of lines may in rare cases appear in pictures of
extremely bright or backlit subjects.
Batteries: Batteries may leak or explode if improperly handled. Observe
the following precautions when handling batteries:
• Use only batteries approved for use in this equipment.
• Do not expose the battery to flame or excessive heat.
• Keep the battery terminals clean.
• Turn the product off before replacing the battery.
• Remove the battery from the camera or charger when not in use and
replace the terminal cover. These devices draw minute amounts of
charge even when off and could draw the battery down to the point
that it will no longer function. If the battery will not be used for some
time, insert it in the camera and run it flat before removing it and storing it in a location with an ambient temperature of 15 °C to 25 °C (59 °F
to 77 °F; avoid hot or extremely cold locations). Repeat this process at
least once every six months.
• Turning the camera on and off repeatedly when the battery is fully discharged will shorten battery life. Batteries that have been fully discharged must be charged before use.
• The internal temperature of the battery may rise while the battery is in
use. Attempting to charge the battery while the internal temperature is
elevated will impair battery performance, and the battery may not
charge or charge only partially. Wait for the battery to cool before
charging.
• Continuing to charge the battery after it is fully charged can impair battery performance.

n
179

• A marked drop in the time a fully charged battery retains its charge
when used at room temperature indicates that it requires replacement.
Purchase a new EN-EL21 battery.
• Charge the battery before use. When taking photographs on important occasions, ready a spare EN-EL21 battery and keep it fully charged.
Depending on your location, it may be difficult to purchase replacement batteries on short notice. Note that on cold days, the capacity of
batteries tends to decrease. Be sure the battery is fully charged before
taking photographs outside in cold weather. Keep a spare battery in a
warm place and exchange the two as necessary. Once warmed, a cold
battery may recover some of its charge.
• Used batteries are a valuable resource; recycle in accord with local regulations.

A Image Sensor Cleaning

Each time it is turned on or off, the camera performs image sensor
cleaning to remove dust from the image sensor (note that operating
camera controls before cleaning is complete interrupts this process,
and that image sensor cleaning may be temporarily disabled if the
camera is turned on and off several times in succession). Dust not
removed by this method may appear in images recorded with the camera, in which case you should have the sensor cleaned by Nikon-authorized service personnel.

D Servicing the Camera and Accessories

The camera is a precision device and requires regular servicing. Nikon
recommends that the camera be inspected by the original retailer or
Nikon-authorized service representative once every one to two years,
and that it be serviced once every three to five years (note that fees
apply to these services). Frequent inspection and servicing are particularly recommended if the camera is used professionally. Any accessories regularly used with the camera, such as lenses or optional flash
units, should be included when the camera is inspected or serviced.

n
180

Available Settings
The following table lists the settings that can be adjusted in each
mode.
❚❚ C Auto, t, u, v, w, and u Best Moment Capture Modes

Shooting menu

Exposure mode
Image quality
Image size 2
Continuous
Silent photography
Number of shots saved
Frame rate
Movie settings
Movie before/after
File format
Metering
White balance
ISO sensitivity
Picture Control
Custom Picture Control
Auto distortion control
Color space
Active D-Lighting
HDR
Long exposure NR
High ISO noise reduction
Movie sound options
Vibration reduction 5
Focus mode
AF-area mode
Face-priority
Built-in AF assist
Flash control 6
Flash compensation 6

C
—
✔1
✔1
✔
✔
—
—
✔
—
—
—
—
—
—
—
✔1
✔1
—
✔4
✔
✔
✔
✔
—
—
—
✔
—
—

t
—
✔1
✔1
✔
✔
—
—
✔
—
—
✔1
✔
✔1
✔
✔
✔1
✔1
✔1
—
✔
✔
✔
✔
✔1
✔1
✔
✔
✔7
✔7

u
—
✔1
✔1
✔
✔
—
—
✔
—
—
✔1
✔
✔1
✔
✔
✔1
✔1
✔1
—
✔
✔
✔
✔
✔1
✔1
✔
✔
✔7
✔7

v
—
✔1
✔1
✔
✔
—
—
✔
—
—
✔1
✔
✔1
✔
✔
✔1
✔1
✔1
—
✔
✔
✔
✔
✔1
✔1
✔
✔
✔7
✔7

w
—
✔1
✔1
✔
✔
—
—
✔
—
—
✔1
✔
✔1
✔
✔
✔1
✔1
✔1
—
✔
✔
✔
✔
✔1
✔1
✔
✔
✔7
✔7

u
—
✔
✔
—
✔
✔3
—
—
—
—
—
—
—
—
—
✔
✔
—
—
—
✔
—
✔
—
—
—
✔
—
—

n
181

Other settings

Focus area selection
Flexible program
Autoexposure lock
Focus lock
Self-timer
Exposure compensation
Flash mode 6
Advanced movie
Theme

C
—
—
—
—
✔
✔
✔
—
—

t
✔
✔1
✔
✔
✔
✔
✔
—
—

u
✔
—
✔
✔
✔
✔
✔
—
—

v
✔
—
✔
✔
✔
✔
✔
—
—

w
✔
—
—
✔
✔
—
✔
—
—

u
—
—
—
—
—
—
—
—
—

1 Has no effect on movies recorded with movie-record button.
2 NEF (RAW) images fixed at 4608 × 3072.
3 Smart Photo Selector mode only.
4 Not available at image qualities of NEF (RAW) or NEF (RAW) + JPEG fine.
5 VR lenses only.
6 Available only when built-in flash is raised or optional flash unit is used.
7 Not available when I is selected for Continuous/self-timer and 15 fps,
30 fps, or 60 fps is selected for Continuous.

n
182

❚❚ v Advanced Movie and z Motion Snapshot Modes

Shooting menu

t
Exposure mode
✔
Image quality
—
Image size
—
Continuous
—
Silent photography
✔
Number of shots saved
—
Frame rate
✔1
Movie settings
✔2
Movie before/after
—
File format
—
Metering
✔2
White balance
✔
ISO sensitivity
✔
Picture Control
✔
Custom Picture Control
✔
Auto distortion control
—
Color space
—
Active D-Lighting
—
HDR
—
Long exposure NR
—
High ISO noise reduction ✔
Movie sound options
✔2
3
✔
Vibration reduction
Focus mode
✔
AF-area mode
✔2
Face-priority
✔2
Built-in AF assist
—
Flash control
—
Flash compensation
—

v
u v
✔ ✔
— —
— —
— —
✔ ✔
— —
✔1 ✔1
✔2 ✔2
— —
— —
✔2 ✔2
✔ ✔
✔ ✔
✔ ✔
✔ ✔
— —
— —
— —
— —
— —
✔ ✔
✔2 ✔2
✔ ✔
✔ ✔
✔2 ✔2
✔2 ✔2
— —
— —
— —

w
✔
—
—
—
✔
—
✔1
✔2
—
—
✔2
✔
✔
✔
✔
—
—
—
—
—
✔
✔2
✔
✔
✔2
✔2
—
—
—

h
✔
—
—
—
✔
—
—
—
✔
✔
—
—
—
—
—
—
—
—
—
—
✔
✔
✔
—
—
—
✔
—
—

t
✔
—
—
—
✔
—
—
—
✔
✔
✔
✔
✔
✔
✔
—
—
—
—
—
✔
—
✔
—
✔
✔
✔
—
—

z
u
✔
—
—
—
✔
—
—
—
✔
✔
✔
✔
✔
✔
✔
—
—
—
—
—
✔
—
✔
—
✔
✔
✔
—
—

v
✔
—
—
—
✔
—
—
—
✔
✔
✔
✔
✔
✔
✔
—
—
—
—
—
✔
—
✔
—
✔
✔
✔
—
—

w
✔
—
—
—
✔
—
—
—
✔
✔
✔
✔
✔
✔
✔
—
—
—
—
—
✔
—
✔
—
✔
✔
✔
—
—

n
183

Other settings

Focus area selection
Flexible program
Autoexposure lock
Focus lock
Self-timer
Exposure compensation
Flash mode
Advanced movie
Theme

t
✔2
—
✔
✔
✔
✔
—
✔
—

v
u v
✔2 ✔2
— —
✔ ✔
✔ ✔
✔ ✔
✔ ✔
— —
✔ ✔
— —

w
✔2
—
—
✔
✔
—
—
✔
—

1 Slow motion selected in advanced movie mode.
2 HD movie selected in advanced movie mode.
3 VR lenses only.

n
184

h
—
—
—
—
—
—
—
—
✔

t
✔
—
✔
✔
—
✔
—
—
✔

z
u
✔
—
✔
✔
—
✔
—
—
✔

v
✔
—
✔
✔
—
✔
—
—
✔

w
✔
—
—
✔
—
—
—
—
✔

Defaults
Defaults for the options in the playback, shooting, and setup
menus may be found on pages 109, 119, and 159, respectively.
Defaults for other settings are listed below.
Option
Default
Focus area (0 153)
Center *
Flexible program (0 34)
Off
Autoexposure lock (0 129)
Off
Focus lock (0 154)
Off
Continuous/self-timer (0 63)
8 (single frame)
Exposure compensation (0 68)
0.0
Flash mode (0 69)
Fill flash
Best moment capture (0 43)
Slow view
Advanced movie (0 49)
HD movie
Theme (0 61)
Beauty
Picture Control settings (0 136)
Unmodified
* Not displayed when Auto-area is selected for AF-area mode.

n
185

Memory Card Capacity
The following table shows the number of pictures or amount of
movie footage that can be stored on a 16 GB Toshiba SD-E016GUX
UHS-I SDHC card at different image quality, size, or movie settings. All figures are approximate; file size varies with the scene
recorded.
❚❚ C Auto, t, u, v, w, Slow View, and Smart Photo Selector 1
Image quality
(0 123)

Image size
(0 123)
4608 × 3072
NEF (RAW) +
3456 × 2304
JPEG fine 3
2304 × 1536
NEF (RAW)
—
4608 × 3072
JPEG fine 3456 × 2304
2304 × 1536
4608 × 3072
JPEG normal 3456 × 2304
2304 × 1536
4608 × 3072
JPEG basic 3456 × 2304
2304 × 1536

File size
26.6 MB
23.1 MB
20.5 MB
17.4 MB
9.2 MB
5.6 MB
3.1 MB
4.6 MB
2.9 MB
1.6 MB
2.4 MB
1.5 MB
0.8 MB

No. of images Buffer capacity 2
591
48
682
48
766
49
902
50
1700
54
2700
60
5000
71
3300
63
5400
76
9800
98
6600
80
10700
100
18600
100

1 Off selected for Silent photography and Number of shots saved set to 1.
2 Maximum number of pictures that can be stored in memory buffer at
ISO 160. Drops if long exposure noise reduction is on (0 146).
3 Image size applies to JPEG images only. Size of NEF (RAW) images can not
be changed. File size is the total for NEF (RAW) and JPEG images.

n
186

❚❚ Smart Photo Selector 1
Image quality (0 123)
NEF (RAW) + JPEG fine 2
NEF (RAW)
JPEG fine

JPEG normal

JPEG basic

Image size (0 123)
4608 × 3072
3456 × 2304
2304 × 1536
—
4608 × 3072
3456 × 2304
2304 × 1536
4608 × 3072
3456 × 2304
2304 × 1536
4608 × 3072
3456 × 2304
2304 × 1536

File size
133.1 MB
115.4 MB
102.7 MB
87.1 MB
45.9 MB
28.2 MB
15.6 MB
23.2 MB
14.3 MB
8.0 MB
11.8 MB
7.4 MB
4.2 MB

No. of shots
118
136
153
180
342
557
1000
679
1000
1900
1300
2100
3700

1 Number of shots saved set to 5. File size is total for 5 images.
2 Image size applies to JPEG images only. Size of NEF (RAW) images can not
be changed. File size is the total for NEF (RAW) and JPEG images.

❚❚ HD Movies
Movie settings (0 126)
1080/60i
1080/30p
720/60p
720/30p

Maximum total length (approx.) *
1 hour 28 minutes
1 hour 28 minutes
2 hours 12 minutes
2 hours 56 minutes

* For information on the maximum length that can be recorded in a single
clip, see page 126.

❚❚ Slow Motion Movies
Frame rate (0 125)
400 fps
1200 fps

Maximum total recorded length (approx.) *
1 hour 4 minutes
2 hours 8 minutes

* Up to 3 s of slow motion footage can be recorded in a single clip. Playback
length is about 13.2 (400 fps) or 40 (1200 fps) times the recorded length.

❚❚ Motion Snapshots
Image quality
—
—

Image size
—
—

Format (0 128)
NMS
MOV

File size
21.6 MB *
30.8 MB

* File size is the total for a single photograph and movie.

No. of shots
729
510

n
187

Troubleshooting
If the camera fails to function as expected, check this list of common problems before consulting your retailer or Nikon representative.

Battery/Display
The camera is on but does not respond: Wait for recording or any other processing to end. If the problem persists, turn the camera off. If the camera still
does not respond, remove and replace the battery or disconnect and
reconnect the AC adapter, but note that this will delete any data not yet
saved. Data already saved to the memory card are unaffected.
The displays are off:
• The camera is off (0 18) or the battery is exhausted (0 12, 21).
• The monitor has been turned off (0 5). Press the $ button to turn
the monitor on.
• An object has come close to the eye sensor, turning the viewfinder on
and the monitor off (0 6).
• The displays have turned off automatically to save power (0 162). The
displays can be reactivated by operating buttons or the mode dial.
• The camera is connected to a computer (0 95) or television (0 100).
The displays turn off without warning:
• The battery is low (0 12, 21).
• The displays have turned off automatically to save power (0 162). The
displays can be reactivated by operating buttons or the mode dial.
• The camera’s internal temperature is high (0 xvi, 194). Wait for the
camera to cool before turning it on again.
The viewfinder is out of focus: Focus the viewfinder using the diopter adjustment control (0 6).
Indicators are not displayed: Press the $ button (0 5).

n
188

Shooting (All Modes)
The camera takes time to turn on: Delete files or format the memory card.
The shutter-release is disabled:
• The battery is exhausted (0 12, 21).
• The memory card is locked (0 15) or full (0 21).
• The flash is charging (0 69).
• The camera is not in focus (0 24).
• You are currently filming a slow motion movie (0 51).
Only one picture is taken each time the shutter-release button is pressed in continuous
release mode: 5 fps is selected for Continuous and the built-in flash is
raised.
The camera does not focus automatically:
• The subject is not suited to autofocus (0 150).
• The camera is in manual focus mode (0 149, 151).
Focus does not lock when the shutter-release button is pressed halfway: Use the 1
(A) button to lock focus when AF-C is selected for focus mode or when
photographing moving subjects in AF-A mode (0 149, 154).
Focus area selection is unavailable: Focus area selection is not available in
auto-area AF (0 153) or face priority (0 27). In other AF-area modes, the
focus area can be selected by pressing J.
Subject-tracking AF not available: Select a non-monochrome Picture Control
(0 136, 153).
AF-area mode selection is unavailable: The camera is in auto or best moment
capture mode (0 41), manual focus mode is selected (0 149), or the h
Scene auto selector is used (0 122).
Image size selection is unavailable: NEF (RAW) is selected for image quality
(0 123).
The camera is slow to record photos: Turn long exposure noise reduction off
(0 146).
Noise (bright spots, randomly-spaced bright pixels, fog, or lines) appears in photos:
• Lower ISO sensitivity or enable high ISO noise reduction (0 146).
• Use long exposure noise reduction at shutter speeds slower than 1 s
(0 146).
No photo taken when ML-L3 remote control shutter-release button is pressed:
• Replace battery in remote control (0 170).
• Choose a remote control mode (0 63).
• The remote control standby timer has expired (0 163).
• The remote is not pointed at the camera or the infrared receiver is not
visible (0 2, 66).
• The remote is too far from the camera (0 66).
• Bright light is interfering with remote.

n
189

Smudges appear in photographs: Clean the front and rear lens elements.
Flicker or banding appears in movies or in the displays: Choose a Flicker reduction setting that matches the local AC power supply (0 164).
No flash: The camera is in best moment capture or Motion Snapshot mode
or is recording a movie, or I is selected for Continuous/self-timer
(0 63) and the Continuous is 15 fps or above (0 125).
Menu items are unavailable: Some options are only available in particular
shooting or exposure modes (0 181) or when the built-in flash is raised
(0 69) or a flash, GPS unit, or wireless mobile adapter is attached (0 72,
76, 79).

Shooting (t, u, v, and w Modes)
The shutter release is disabled: You selected mode u after choosing a shutter
speed of “Bulb” in mode w (0 35).
Some shutter speeds are not available: You are using a flash.
Colors are unnatural:
• Adjust white balance to match the light source (0 130).
• Adjust Picture Control settings (0 136).
Cannot measure white balance: The subject is too dark or too bright (0 133).
Picture Controls produce varying results: A (auto) is selected for sharpening,
contrast, or saturation. For consistent results over a series of photos,
choose another setting (0 138).
Metering can not be changed: Exposure lock is in effect (0 129).
Noise (reddish areas and other artifacts) appears in long time-exposures: Enable
long-exposure noise reduction (0 146).

Movies
Cannot record movies: The movie-record button can not be used to record
movies in best moment capture or Motion Snapshot mode (0 48, 61).
No sound is recorded for movies:
• Microphone off is selected for Movie sound options > Microphone
(0 147).
• Live audio is not recorded with slow-motion movies (0 53) or Motion
Snapshots (0 59).

n
190

Playback
NEF (RAW) images are not displayed: The camera displays only the JPEG copies
of NEF (RAW) + JPEG fine images (0 123).
“Tall” (portrait) orientation photos are displayed in “wide” (landscape) orientation:
• Select On for Rotate tall (0 112).
• The photos were taken with Auto image rotation off (0 166).
• Camera was pointed up or down when the photo was taken (0 166).
• Photo is displayed in image review (0 112).
Cannot hear movie sound:
• Rotate the command dial right to raise the volume (0 56). If the camera is connected to a television (0 100), use the controls for the TV to
adjust the volume.
• Live audio is not recorded with slow-motion movies (0 53) or Motion
Snapshots (0 61).
Cannot delete images:
• Remove protection from the files before deletion (0 112).
• The memory card is locked (0 15).
Cannot select photos for printing: The memory card is full (0 21) or locked
(0 15) or the photos are in NEF (RAW) format. To print NEF (RAW) photos, transfer the pictures to a computer and use the supplied software or
Capture NX 2 (0 95).
Pictures are not displayed on TV: The camera is not correctly connected
(0 100).
Pictures cannot be transferred to a computer: If your system does not meet the
requirements on page 93, you may still be able to transfer pictures to the
computer using a card reader.
Photos are not displayed in Capture NX 2: Update to the latest version (0 171).

Miscellaneous
The date of recording is not correct: Set the camera clock (0 19, 165).
Menu items are unavailable: Some options are only available at particular
settings (0 181) or when a memory card is inserted (0 14).

n
191

Error Messages
This section lists the error messages that appear in the display.
Message

n
192

Solution
If the subject is too bright, lower ISO
sensitivity or choose a faster shutter
speed or smaller aperture (higher
(Shutter-speed or
f-number).
aperture display
If the subject is too dark, raise ISO senflashes)
sitivity, use a flash, or choose a slower
shutter speed or larger aperture (lower
f-number).
A lens with a retractable lens barrel
Keeping the zoom ring
button is attached with the lens barrel
button pressed, rotate
retracted. Press the retractable lens
the zoom ring to
barrel button and rotate the zoom ring
extend the lens.
to extend the lens.
Check lens. Pictures
can only be taken
Attach a lens.
when a lens is
attached.
Cannot take pictures. Turn the camera off and recharge the
Insert fully-charged
battery or insert a fully charged spare
battery.
battery.
Start-up error. Turn the Turn the camera off, remove and
camera off and then replace the battery, and then turn the
on again.
camera on.
The clock has been
Set the camera clock.
reset.
Turn the camera off and confirm that
No memory card.
the card is correctly inserted.
This memory card is Select Yes to format the card, or turn
not formatted. Format the camera off and insert another
the memory card?
memory card.
Turn the camera off and slide the card
Memory card is locked
write-protect switch to the “write”
(write protected).
position.

0
35, 36,
37, 135
35, 36,
37, 69,
72, 135

17, 202

12, 14

14, 18
19, 165
14
14, 161

Message
Solution
Eye-Fi cards cannot be
Turn the camera off and slide the card
used with the write
write-protect switch to the “write”
protect switch in the
position.
“lock” position.
• You may be able to record additional
images if you reduce image quality or
size.
Memory card is full.
• Delete unwanted images.
• Insert another memory card.
• Use an approved card.
• Format the card. If the problem perThis memory card
sists, the card may be damaged. Concannot be used. Card
may be damaged;
tact a Nikon-authorized ser vice
insert a different card. representative.
• Insert a new memory card.
If the current folder is numbered 999 and
contains either 999 photographs or a
photograph numbered 9999, the shutCannot create
ter-release button will be disabled and
additional folders on
no further photographs can be taken.
memory card.
Choose Yes for Reset file numbering
and then either format the current memory card or insert a new memory card.
The movie-record
The movie-record button can not be
button cannot be used used in best moment capture or
in this mode.
Motion Snapshot modes.
Photographs cannot The shutter-release button can not be
be recorded in this
used to take photographs while a
mode.
slow-motion movie is being recorded.
The capture
The capture illuminator on the
illuminator has been optional SB-N5 flash unit turns off
used consecutively for automatically after extended use.
the maximum time
Remove your finger from the shutterand has turned off.
release button for a short period.
Photographs cannot be
taken in shutter- priority Choose a different shutter speed, or
auto mode at a shutter select mode w.
speed of “Bulb”.

0
173
123

87
14, 172
172
161

14, 172

164

48, 61

35, 37

n
193

Message
Solution
Turn the camera off and then on again
Failed to update
and reattempt the update. If the probspeedlight firmware.
lem persists or reoccurs frequently,
Try again after turning
contact a Nikon-authorized service
the camera off and on.
representative.
Turn the camera off and then on again
Failed to update lens
and reattempt the update. If the probfirmware. Try again
lem persists or reoccurs frequently,
after turning the
contact a Nikon-authorized service
camera off and on.
representative.
Press the shutter-release button. ConAn error has occurred.
tact a Nikon-authorized service reprePress the shuttersentative if the problem persists or rerelease button again.
occurs frequently.
An error has occurred Turn the camera off and then on again.
in the internal circuitry. If the problem persists or reoccurs freTry again after turning quently, contact a Nikon-authorized
the camera off and on. service representative.
The camera’s internal
temperature is high.
Wait for the camera to cool.
The camera will now
turn off.
Memory card contains To view pictures, insert a memory card
no images.
containing images.
The file has been created or modified
Cannot display this file. on a computer or different make of
camera, or is corrupt.
Check printer.
Check the printer.
Select Resume after loading paper of
Check paper.
the correct size.
Paper jam.
Clear the jam and select Resume.
Out of paper.
Insert paper and select Resume.
Check ink supply.
Select Resume after checking the ink.
Out of ink.
Replace the ink and select Resume.
* See the printer manual for more information.

n
194

—

xvi

14
—
—*
—*
—*
—*
—*
—*

Specifications
Nikon 1 V2 Digital Camera
Type
Type
Lens mount
Effective angle of view
Effective pixels
Image sensor
Image sensor

Digital camera with support for interchangeable
lenses
Nikon 1 mount
Approx. 2.7× lens focal length (35 mm format
equivalent)
14.2 million
13.2 mm × 8.8 mm CMOS sensor (Nikon CX format)
Image sensor cleaning

Dust-reduction system
Storage
Image size (pixels)
Still images (C, t, u, v, w, u modes; aspect ratio 3 : 2)
• 4608 × 3072
• 3456 × 2304
• 2304 × 1536
Still images (v mode; aspect ratio 3 : 2)
• 4608 × 3072 (1080/60i, 1080/30p)
• 1280 × 856 (720/60p, 720/30p)
Still images (Motion Snapshots; aspect ratio 16 : 9)
4608 × 2592
File format
• NEF (RAW): 12-bit, compressed
• JPEG: JPEG-Baseline compliant with fine (approx.
1 : 4), normal (approx. 1 : 8), or basic (approx. 1 : 16)
compression
• NEF (RAW) + JPEG: Single photograph recorded in
both NEF (RAW) and JPEG formats
Picture Control system Standard, Neutral, Vivid, Monochrome, Portrait,
Landscape; selected Picture Control can be modified; storage for custom Picture Controls
Media
SD (Secure Digital), SDHC, and SDXC memory cards
File system
DCF (Design Rule for Camera File System) 2.0, DPOF (Digital Print Order Format), Exif (Exchangeable Image File Format
for Digital Still Cameras) 2.3, PictBridge

n
195

Electronic viewfinder
Electronic viewfinder
Frame coverage
Eyepoint
Diopter adjustment
Eye sensor
Shooting modes

Shutter
Type
Speed

Flash sync speed

Release
Mode
Frame advance rate
Self-timer
Remote control modes

n
196

0.47-in., approx. 1440k-dot color TFT LCD viewfinder
with diopter control and brightness adjustment
Approx. 100% horizontal and 100% vertical
18 mm (–1.0 m–1; from center surface of viewfinder eyepiece lens)
–3–+2 m–1
Camera switches to viewfinder display when it
detects that viewfinder is in use
C auto, t programmed auto, u shutter-priority
auto, v aperture-priority auto, w manual,
u best moment capture (slow view and Smart
Photo Selector), v advanced movie (HD and
slow motion), z Motion Snapshot
Electronically-controlled vertical-travel focalplane mechanical shutter; electronic shutter
• Mechanical shutter: 1/4000 –30 s in steps of 1/3 EV;
Bulb; Time (requires optional ML-L3 remote control)
• Electronic shutter: 1/16,000 –30 s in steps of 1/3 EV;
Bulb; Time (requires optional ML-L3 remote control)
Note: Bulb and Time end automatically after approximately 2 minutes
• Mechanical shutter: Synchronizes with shutter at
X= 1/250 s or slower
• Electronic shutter: Synchronizes with shutter at
X= 1/60 s or slower
• Single frame, continuous
• Self-timer, remote
Approximately 5, 15, 30, or 60 fps
2 s, 10 s
Delayed remote (2 s); quick-response remote

Exposure
Metering
Metering method

TTL metering using image sensor
• Matrix
• Center-weighted: Meters 4.5 mm circle in center of
frame
• Spot: Meters 2 mm circle centered on selected
focus area
Mode
t programmed auto with flexible program;
u shutter-priority auto; v aperture-priority auto;
w manual; h scene auto selector
Exposure compensation –3–+3 EV in increments of 1/3 EV (user controlled in t,
u, and v modes)
Exposure lock
Luminosity locked at metered value with A
(AE-L/AF-L) button
ISO sensitivity
ISO 160–6400 in steps of 1 EV; auto ISO sensitiv(Recommended Exposure ity control (ISO 160–6400, 160–3200, 160–800) available
Index)
(user controlled in t, u, v, and w modes)
Active D-Lighting
On, off
Focus
Autofocus
Hybrid autofocus (phase detection/contrastdetect AF); AF-assist illuminator
Lens servo
• Autofocus (AF): Single AF (AF-S); continuous AF
(AF-C); auto AF-S/AF-C selection (AF-A); fulltime AF (AF-F)
• Manual focus (MF)
AF-area mode
Single-point, auto-area, subject tracking
Focus area
• Single-point AF: 135 focus areas; the center 73
areas support phase-detection AF
• Auto-area AF: 41 focus areas
Focus lock
Focus can be locked by pressing shutter-release
button halfway (single AF) or by pressing A (AEL/AF-L) button
Face priority
On, off

n
197

Flash
Built-in flash
Guide Number (GN)
Control
Mode

Flash compensation
Flash-ready indicator
White balance

Raised by pressing flash button
Approx. 5/16 (m/ft, ISO 100, 20 °C/68 °F; at ISO
160, Guide Number is approx. 6.3/20.7)
i-TTL flash control using image sensor
Fill flash, fill flash + slow sync, red-eye reduction,
red-eye reduction + slow sync, rear-curtain sync,
rear curtain + slow sync
–3–+1 EV in increments of 1/3 EV
Lights when flash is fully charged
Auto, incandescent, fluorescent, direct sunlight,
flash, cloudy, shade, preset manual, all except
preset manual with fine tuning

Movie
Metering
Metering method

TTL metering using image sensor
• Matrix
• Center-weighted: Meters 4.5 mm circle in center of
frame
• Spot: Meters 2 mm circle centered on selected
focus area
Frame size (pixels)/
HD movies and movies recorded in C, t, u, v, and w
recording rate
modes (aspect ratio 16 : 9)
• 1920 × 1080/60i (59.94 fields/s *)
• 1920 × 1080/30p (29.97 fps)
• 1280 × 720/60p (59.94 fps)
• 1280 × 720/30p (29.97 fps)
Slow-motion movies (aspect ratio 8 : 3)
• 640 × 240/400 fps (plays at 30p/29.97 fps)
• 320 × 120/1200 fps (plays at 30p/29.97 fps)
Motion Snapshot (aspect ratio 16 : 9)
1920 × 1080/60p (59.94 fps) (plays at 24p/23.976 fps)
File format
MOV
Video compression
H.264/MPEG-4 Advanced Video Coding
Audio recording format AAC
Audio recording device Built-in or optional external ME-1 stereo microphone; sensitivity adjustable

n
198

* Sensor output is about 60 fps.

Monitor

7.5 cm (3-in.), approx. 921k-dot, TFT LCD with
brightness adjustment

Playback

Full-frame and thumbnail (4, 9, or 72 images or
calendar) playback with playback zoom, movie
playback, slide show, histogram display, auto
image rotation, and rating option

Interface
USB
HDMI output
Multi accessory port
Audio input
Supported languages

Power source
Battery
AC adapter
Tripod socket

Hi-Speed USB
Type C mini-pin HDMI connector
Used for designated accessories
Stereo mini-pin jack (3.5 mm diameter)
Arabic, Chinese (Simplified and Traditional),
Czech, Danish, Dutch, English, Finnish, French,
German, Greek, Hindi, Hungarian, Indonesian,
Italian, Japanese, Korean, Norwegian, Polish, Portuguese (European and Brazilian), Romanian,
Russian, Spanish, Swedish, Thai, Turkish, Ukrainian, Vietnamese
One rechargeable Li-ion EN-EL21 battery
EH-5b AC adapter; requires EP-5D power connector (available separately)

/
(ISO 1222)
Dimensions/weight
Dimensions (W × H × D) Approx. 107.8 × 81.6 × 45.9 mm (4.2 × 3.2 ×
1.8 in.), excluding projections; thickness of body
(from mount to monitor) is 33.2 mm (1.3 in.)
Weight
Approx. 337 g (11.9 oz) with battery and memory
card but without body cap; approx. 278 g (9.8 oz),
camera body only
1 4-in.

n
199

Operating environment
Temperature
Humidity

0 °C–40 °C (+32 °F–104 °F)
85% or less (no condensation)

• Unless otherwise stated, all figures are for a camera with a fully-charged battery operating at the temperature specified by the Camera and Imaging
Products Association (CIPA): 23 ±3 °C (73.4 ±5.4 °F).
• Nikon reserves the right to change the specifications of the hardware and
software described in this manual at any time and without prior notice.
Nikon will not be held liable for damages that may result from any mistakes
that this manual may contain.

MH-28 battery charger
Rated input
Rated output
Supported batteries
Charging time

AC 100–240 V, 50–60 Hz, 0.2 A
DC 8.4 V/0.6 A
Nikon EN-EL21 rechargeable Li-ion batteries
Approx. 2 hours at an ambient temperature of
25 °C (77 °F) when no charge remains
Operating temperature 0 °C–40 °C (+32 °F–104 °F)
Dimensions (W × H × D) Approx. 67.0 × 28.0 × 104.0 mm (2.6 × 1.1 × 4.1
in.), excluding plug adapter
Weight
Approx. 88 g (3.1 oz), excluding plug adapter
EN-EL21 rechargeable Li-ion battery
Type
Rechargeable lithium-ion battery
Rated capacity
7.2 V, 1485 mAh
Operating temperature 0 °C–40 °C (+32 °F–104 °F)
Dimensions (W × H × D) Approx. 37.6 × 49.7 × 18.1 mm (1.5 × 2.0 × 0.7 in.)
Weight
Approx. 57 g (2.0 oz), excluding terminal cover

n
200

1 NIKKOR VR 10–30mm f/3.5–5.6
Type
1 mount lens
Focal length
10–30 mm
Maximum aperture
f/3.5–5.6
Construction
12 elements in 9 groups (including 3 aspherical elements)
Angle of view
77°–29° 40′
Vibration reduction
Lens shift using voice coil motors (VCMs)
Minimum focus distance 0.2 m (0.7 ft) from focal plane at all zoom positions
Diaphragm blades
7 (rounded diaphragm opening)
Diaphragm
Fully automatic
Aperture range
• 10 mm focal length: f/3.5–16
• 30 mm focal length: f/5.6–16
Filter-attachment size 40.5 mm (P=0.5 mm)
Dimensions
Approx. 57.5 mm diameter × 42 mm (distance from
camera lens mount flange when lens is retracted)
Weight
Approx. 115 g (4.1 oz)
1 NIKKOR 11–27.5mm f/3.5–5.6
Type
1 mount lens
Focal length
11–27.5 mm
Maximum aperture
f/3.5–5.6
Construction
8 elements in 6 groups (including 1 ED lens element and
1 aspherical lens element), 1 protective glass element
Angle of view
72°–32° 20′
Minimum focus distance 0.3 m (1.0 ft) from focal plane at all zoom positions
Diaphragm blades
7 (rounded diaphragm opening)
Diaphragm
Fully automatic
Aperture range
• 11 mm focal length: f/3.5–16
• 27.5 mm focal length: f/5.6–16
Filter-attachment size 40.5 mm (P=0.5 mm)
Dimensions
Approx. 57.5 mm diameter × 31 mm (distance from
camera lens mount flange when lens is retracted)
Weight
Approx. 83 g (3.0 oz)
Specifications subject to change without notice. Nikon will not be held liable
for damages that may result from any mistakes that this manual may contain.

n
201

❚❚ 1 NIKKOR Lenses
1 NIKKOR VR 10–30mm f/3.5–5.6

Lens cap

Lens hood mounting mark
Zoom ring
Lens mounting mark
CPU contacts

Focal length mark
Focal length scale
Retractable lens barrel button

1 NIKKOR 11–27.5mm f/3.5–5.6
Lens cap

Zoom ring
Lens mounting mark
CPU contacts

n
202

Focal length mark
Focal length scale
Retractable lens barrel button

1 NIKKOR lenses are exclusively for Nikon 1 interchangeable lens
format digital cameras. The angle of view is equivalent to a
35 mm format lens with a focal length about 2.7× longer. The
1 NIKKOR VR 10–30mm f/3.5–5.6 supports normal and active
vibration reduction and vibration reduction off (0 148).
Use the zoom ring to zoom in and out.

A Detaching the Lens

Before removing or exchanging lenses,
retract the lens and turn the camera off
(0 17). To remove the lens, press and hold
the lens release button (q) while turning the
lens clockwise (w). After removing the lens,
replace the lens caps and camera body cap.

A Lens Care

• When using an optional lens hood, do not pick up or hold the lens or
camera using only the hood.
• Keep the CPU contacts clean.
• Use a blower to remove dust and lint from the lens surfaces. To
remove smudges and fingerprints, apply a small amount of ethanol or
lens cleaner to a soft, clean cotton cloth or lens-cleaning tissue and
clean from the center outwards using a circular motion, taking care
not to leave smears or touch the glass with your fingers.
• Never use organic solvents such as paint thinner or benzene to clean
the lens.
• A lens hood or NC filter can be used to protect the front lens element.
• Attach the front and rear caps when the lens is not in use.
• If the lens will not be used for an extended period, store it in a cool,
dry location to prevent mold and rust. Do not store in direct sunlight
or with naphtha or camphor moth balls.
• Keep the lens dry. Rusting of the internal mechanism can cause irreparable damage.
• Leaving the lens in extremely hot locations could damage or warp
parts made from reinforced plastic.

n
203

A Supplied Accessories

• 40.5 mm snap-on Front Lens Cap LC-N40.5
• Rear Lens Cap LF-N1000

A Optional Accessories

• 40.5 mm screw-on filters
• Bayonet Hood HB-N101 (for use with the 1 NIKKOR VR 10–30mm
f/3.5–5.6; attaches as shown below).

• 40.5 mm screw-on Hood HN-N102 (for use with the 1 NIKKOR
11–27.5mm f/3.5–5.6; attaches as shown below)

n
204

❚❚ The Optional FT1 Mount Adapter
Read this section for information on using the optional FT1
mount adapter. Before proceeding, be sure that you have read
and understood this manual and the documentation for the FT1
and lenses.
Autofocus
Autofocus is available only with AF-S lenses; other lenses support manual focus only. Set the camera focus mode to AF-S (the
camera will not focus in other autofocus modes). The only AFarea mode available is Single-point and the camera focuses on
the subject in the center focus area only. Face priority is not supported. In some cases, a beep may sound, the in-focus indicator
may be displayed, and pictures can be taken when the camera is
not in focus; if this occurs, focus manually.
Manual Focus
Follow the steps below to focus manually when using the FT1
with a NIKKOR F mount lens.

1 Select manual focus mode.

Select Manual focus for Focus mode in the shooting menu.

2 Focus.

Rotate the lens focus ring until the
subject is in focus.

If the lens supports autofocus with manual override, after
focusing using autofocus you can keep the shutter-release
button pressed halfway and rotate the lens focus ring to finetune focus manually. To refocus using autofocus, press the
shutter-release button halfway again.

n
205

To zoom in on the display for more
precise focus, press J (note that this
feature is not available during movie
recording or in slow-motion movie
mode). A navigation window will
appear in a gray frame at the bottom
right of the display.
Navigation window

Rotate the command dial right to
zoom in to a maximum of 10×, left to
zoom out. Use the multi selector to
scroll to areas of the frame not visible
in the display. Press J to exit zoom.
Command dial

The Electronic Rangefinder
If a CPU lens is attached in manual focus
mode, the focus indicator can be used to
check whether the camera is focused on
the subject in the center focus area.
Focus indicator
I
2
4
2 4
(flashes)

Status
In focus.
Camera focused in front of subject.
Camera focused behind subject.
Unable to determine focus.

Note that with some subjects, the in-focus indicator (I) may be
displayed when the camera is not in focus. Check focus in the
display before shooting.

n
206

Error Messages and Displays
The following warnings appear in the camera aperture display.
Display
FEE

F––

Problem

Solution
When using CPU lenses, lock
Lens aperture ring is not
aperture ring at minimum aperlocked at minimum aperture.
ture (highest f-number).
When using non-CPU lens, rotate
Non-CPU lens is attached, or
lens aperture ring to adjust aperno lens is attached.
ture.

Restrictions
• Auto and best moment capture modes are not supported.
• Motion Snapshots can be recorded only when an AF-S lens is
attached and AF-S (Single AF) is selected for focus mode and
then only when the camera is in focus. Do not attempt to
adjust focus using the focus ring.
• Shutter speeds of 1 s or slower are not available.
• The sound monitor switch and focus operation button (Focus
Lock/MEMORY RECALL/AF Start) have no effect.
Precautions for Use
• Lenses over 380 g (13.4 oz) should be supported at all times.
Do not hold the camera or carry the camera by the strap without supporting the lens. Failure to observe this precaution
could damage the camera lens mount.
• Lines may appear in photographs taken with non-CPU lenses
stopped down to minimum aperture.
• The camera continues to adjust exposure during movie recording. Select mode v or w to prevent sounds made by the lens
being picked up by the microphone.
• During continuous shooting, focus is fixed at the position for
the first shot in each burst. Frame rates will slow when 5 fps is
selected for Continuous.

n
207

• Certain lenses will block the AF-assist illuminator and, at some
distances, the flash.
• The tops and bottoms may be missing from circular bokeh
shapes created at wide apertures using lenses with a maximum
aperture of f/1.4.
❚❚ Supported Standards
• DCF Version 2.0: The Design Rule for Camera File Systems (DCF) is
a standard widely used in the digital camera industry to ensure
compatibility among different makes of camera.
• DPOF: Digital Print Order Format (DPOF) is an industry-wide
standard that allows pictures to be printed from print orders
stored on the memory card.
• Exif version 2.3: The camera supports Exif (Exchangeable Image
File Format for Digital Still Cameras) version 2.3, a standard in
which information stored with photographs is used for optimal
color reproduction when the images are output on Exif-compliant printers.
• PictBridge: A standard developed through cooperation with the
digital camera and printer industries, allowing photographs to
be output directly to a printer without first transferring them to
a computer.
• HDMI: High-Definition Multimedia Interface is a standard for
multimedia interfaces used in consumer electronics and AV
devices capable of transmitting audiovisual data and control
signals to HDMI-compliant devices via a single cable connection.

n
208

A Trademark Information

Macintosh, Mac OS, and QuickTime are registered trademarks of Apple
Inc. in the United States and/or other countries. Microsoft, Windows,
and Windows Vista are either registered trademarks, or trademarks of
Microsoft Corporation in the United States and/or other countries. The
PictBridge logo is a trademark. Google Play is a trademark of Google
Inc. The SD, SDHC, and SDXC logos are trademarks of SD-3C, LLC. HDMI,
the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

All other trade names mentioned in this manual or the other documentation provided with your Nikon product are trademarks or registered
trademarks of their respective holders.

A FreeType License (FreeType2)

A MIT License (HarfBuzz)

n
209

Battery Life
The number of shots or movie footage that can be recorded with
fully-charged batteries varies with the condition of the battery,
temperature, the interval between shots, and the length of time
menus are displayed. Sample figures for EN-EL21 (1485 mAh)
batteries are given below.
• Still images: Approximately 310 shots
• Movies: Approximately 65 minutes of HD footage at 1080/60i
Measured according to CIPA standards at 23 ±3 °C (73.4 ±5.4 °F)
with the camera at default settings, a fully-charged battery, a
1 NIKKOR VR 10–30mm f/3.5–5.6 lens, and a 16 GB Toshiba
SD-E016GUX UHS-I SDHC card. Value for still images obtained
under the following test conditions: photographs taken at
intervals of 30 s with the built-in flash fired with every other
shot and the camera turned off and then on after every ten
shots. Value for movies obtained under the following test conditions: a series of 20 minute movies with a file size of up to
4 GB were recorded; recording was only interrupted when temperature warning was displayed.
The following can reduce battery life:
• Keeping the shutter-release button pressed halfway
• Repeated autofocus operations
• Taking NEF (RAW) photographs
• Slow shutter speeds
• Using a wireless mobile adapter or Eye-Fi cards
• Using vibration reduction mode with VR lenses
• Using zoom with power zoom lenses

n
210

To ensure that you get the most from rechargeable Nikon
EN-EL21 batteries:
• Keep the battery contacts clean. Soiled contacts can reduce
battery performance.
• Use batteries immediately after charging. Batteries will lose
their charge if left unused.

Index
Symbols
C (Auto mode) ..................................23
t (Programmed auto) ........... 34, 122
u (Shutter-priority auto) ...... 35, 122
v (Aperture-priority auto) ... 36, 122
w (Manual) ................................ 37, 122
u (Best moment capture mode) 41
v (Advanced movie mode) .........49
z (Motion Snapshot mode) ..........59
h (Scene auto selector) ............. 122
c (Portrait) .........................................26
d (Landscape) ...................................26
f (Night portrait) .............................26
e (Close up) .......................................26
g (Night landscape) .......................26
Z (Auto) ..............................................26
U (flexible program) .........................34
G (menu) button ....10, 109, 119,
159
K (playback) button ..........30, 47, 62
O (delete) button ..........48, 57, 62, 87
$ (display) button ................. 5, 81
& (feature) button .. 9, 28, 52, 61, 88
J (OK) button ......................47, 56, 62
A (AE-L/AF-L) ............ 129, 155, 163
E (exposure compensation) .........68
C (continuous shooting/self-timer) .
63, 65
N (flash mode) ....................................70
L (Preset manual) ....................... 132
L (matrix) ......................................... 128
M (centerweighted) ...................... 128
N (spot) ............................................. 128
e (auto-area) ................................. 153
c (single-point) ............................ 153
9 (subject tracking) .................... 153
8 (Single frame) ...............................63
I (Continuous) .................................63
E (Self-timer) ......................................63
# (Remote control) ............................63

Y (red-eye reduction) .................... 69
p (slow sync) .................................... 69
q (rear curtain sync) ...................... 69
N (flash-ready indicator) .......... 69, 73

A
AC adapter ............................... 169, 174
Accessories ........................................169
Active D-Lighting ............................144
Adobe RGB ........................................143
Advanced movie mode .................. 49
AE lock ...................................... 129, 163
AE-L ............................................ 129, 155
AF ................................................ 149, 153
AF-A .....................................................149
AF-area mode ...................................153
AF-assist illuminator ............ 151, 156
AF-C .....................................................149
AF-F ......................................................149
AF-S ......................................................149
Aperture ........................................ 36, 37
Aperture-priority auto .................... 36
Assign AE/AF-L button ..................163
Assisted GPS ....................................... 78
Attaching the lens ............................ 17
Auto distortion control .................142
Auto image rotation ......................166
Auto mode .......................................... 23
Auto power off ...................18, 77, 162
Auto-area AF (AF-area mode) .....153
Autofocus ................................. 149, 153
Automatic scene selection ............ 26
Auto-select AF ..................................149
Available settings ............................181

B
Background track ................ 62, 89, 98
Battery ............................12, 14, 21, 200
Beep ................................................ 24, 65
Best moment capture mode ......... 41
Best shot ........................................ 44, 47

n
211

Body cap ....................................1, 2, 171
Border ..................................................107
Bounce lighting ................................. 74
Brightness ..........................................138
Buffering ........................................ 45, 60
Built-in AF assist ..................... 151, 156
Built-in Flash ....................................... 69
Bulb ........................................................ 38

Detailed display ............................... 4, 5
Detailed photo information ......5, 82
Digital Print Order Format ...........208
Diopter adjustment control .............6
Display brightness ..........................161
D-Lighting .........................................113
DPOF ................................104, 108, 208
DPOF print order ................... 104, 108

Calendar ........................................ 85, 89
Calendar playback ............................ 85
Capture illuminator ..... 42, 45, 61, 74
Capture NX 2 ..................124, 141, 171
CEC .......................................................101
Center-weighted (Metering) .......128
Change theme .................................117
Charging a battery ............................ 12
Clean image sensor ........................180
Clock ...............................19, 20, 77, 165
Clock battery ....................................... 20
Close up ................................................ 26
Color space ........................................143
Color temperature ..........................134
Command dial ...................... 9, 30, 152
Compatible lens ..............................169
Computer ............................................. 91
Continuous .................................63, 125
Continuous AF ..................................149
Contrast .................................... 138, 144
Creating short movies .............. 97, 98
Crop ........................................... 107, 115
Custom Picture Control ....... 137, 140

Edit movie ..........................................116
Electronic viewfinder ................ 6, 161
Exif version 2.3 ....................... 143, 208
Exposure ..................68, 122, 128, 129
Exposure compensation ................ 68
Exposure indicator ........................... 38
Exposure lock ......................... 129, 163
Exposure mode ...............................122
Eye sensor ...............................................6
Eye-Fi ...................................................173

n
212

Date and time ............................19, 165
Date format ................................19, 165
Daylight saving time ...............19, 165
DCF version 2.0 ...................... 143, 208
Defaults ..............................................185
Delete ........................ 31, 48, 57, 62, 87
Delete all images ............................... 87
Delete selected images ................... 87

F
Face priority ...............................27, 156
File format .........................................128
Fill flash ................................................. 69
Filter effects ............................ 138, 139
Fine-tuning white balance ..........131
Firmware version ............................167
Flash .................... 69, 72, 157, 158, 170
Flash compensation .......................158
Flash control .....................................157
Flash mode .......................................... 70
Flash range .......................................... 71
Flash-ready indicator ................ 69, 73
Flexible program ............................... 34
Flicker reduction .............................164
Focal length ................................. 27, 82
Focal length scale ....................27, 202
Focal plane mark ........................ 2, 152
Focus ......................................... 149, 153
Focus area ...................................24, 153
Focus lock ..........................................154
Focus mode ......................................149

Focusing the viewfinder ................... 6
Format ......................................... 15, 161
Format memory card ............. 15, 161
Frame rate .................................. 81, 125
FT1 ....................................................... 205
Full-frame playback ...................30, 81
Full-time AF ...................................... 149

G
GP-N100 ................................................76
GPS .........................................................76
Grid display ...................................6, 162

H
H.264 ................................................... 198
HD Movies .................................. 49, 126
HDMI ..........................................100, 208
HDMI device control ..................... 101
HDMI-CEC ......................................... 101
HDR ..................................................... 145
High definition .......................100, 208
High ISO noise reduction ............ 146
Histogram ............................................83
Hue ...................................................... 138

I
Image quality ................................... 123
Image review ................................... 112
Image selection .............................. 111
Image size ......................................... 123
Index print ........................................ 104
Infrared receiver ............................ 2, 66
ISO sensitivity .................................. 135

J
JPEG ..................................................... 123

L
Landscape .................................. 26, 136
Language ................................... 19, 165
Lens .................... 17, 27, 148, 169, 201
Lens cap ............................................. 203
Lens mount ....................................... 152
Live image control ............................28

Load from/save to card .................141
Long exposure NR ..........................146

M
Manual .........................................37, 122
Manual focus ....................................151
Matrix (Metering) ............................128
Maximum aperture ........................201
Memory card ...14, 16, 161, 172, 186
Memory card access lamp ............. 25
Memory card capacity ..................186
Metering .............................................128
Microphone ...............................50, 147
Mode dial ................................................7
Monitor ......................................4, 5, 161
Monitor brightness ........................161
Monochrome ....................................136
Motion Snapshot mode .................. 59
Mount adapter ....................... 169, 205
MOV .....................................................124
Movie before/after .........................127
Movie settings ..................................126
Movie sound options .....................147
Movie type ........................................... 52
Movie-record button .. 32, 40, 50, 54
Movies ..........................................49, 126
Multi accessory port ................. 72, 76
Multi selector .........................................8

N
NEF ............................................. 123, 124
NEF (RAW) ................................ 123, 124
Neutral ................................................136
Night landscape ................................ 26
Night portrait ..................................... 26
Nikon Transfer 2 ................................. 95
Number of shots saved .................125

O
Optional flash ..................................... 72

Photo information ........................5, 81

213

PictBridge ................................. 102, 208
Picture Control ....................... 136, 140
Pixel mapping ..................................167
Playback ........................................ 30, 81
Playback menu .................................109
Playback zoom ................................... 86
Portrait .........................................26, 136
Power connector ................... 169, 174
Power drive zoom switch ............... 27
Power switch ....................................... 18
Preset manual ......................... 130, 132
Press the shutter-release button all
the way down ............................ 25, 26
Press the shutter-release button
halfway ......................................... 24, 26
Print date ............................................108
Print DPOF print order ...................104
Printing ...............................................102
Programmed auto ....................34, 122
Protect .................................................112

Q
Quick adjust ......................................138

R
Rating ...........................................88, 112
Rear-curtain sync .............................. 69
Red-eye reduction ............................ 69
Remote control .........................63, 163
Remote on duration .......................163
Removing the lens from the camera
203
Reset file numbering .....................164
Reset setup options .......................160
Reset shooting options .................122
Resize ...................................................114
Retractable lens barrel button .... 17,
18, 202
Rotate tall ...........................................112

n
214

S
Saturation ..........................................138
Scene auto selector ........................122

SD card ...............................................172
Select by date ...................................104
Select images for printing ...........104
Self-timer ....................................63, 162
Sensitivity ..........................................135
Setup menu ......................................159
Sharpening ........................................138
Shooting menu ................................119
Short Movie Creator ........... 91, 97, 98
Shutter button AE lock .................163
Shutter speed .............................. 35, 37
Shutter-priority auto ....................... 35
Shutter-release button .... 24, 26, 42,
45, 60, 163
Silent photography ........................125
Simple photo information ............. 81
Simplified display ................................5
Single AF ............................................149
Single frame ........................................ 63
Single-point ......................................153
Size ................. 114, 123, 126, 195, 198
Slide show ........................................... 89
Slot empty release lock .................161
Slow motion ..............................53, 125
Slow sync ............................................. 69
Slow view ...................................... 41, 43
Smart photo selector ................ 43, 44
Speaker ....................................................2
Speedlight ........................................... 72
Spot (Metering) ...............................128
sRGB .....................................................143
Standard .............................................136
Strap ...................................................... 12
Subject tracking ..............................153
System Requirements ..................... 93

T
Television ...........................................100
Temperature warnings ....................xvi
Theme ................................................... 61
Thumbnail playback ........................ 84
Time .......................................19, 38, 165

Time stamp ....................................... 107
Time zone .......................................... 165
Time zone and date ....................... 165
Timer ......................................................63
Toning .......................................138, 139
Trimming movies ........................... 116

U
USB ........................................ 79, 95, 102
USB cable ................................... 95, 102
Use GPS to set clock .........................77
UTC .........................................................77

V
Vibration reduction ....................... 148
Viewfinder .....................................6, 161
Viewfinder brightness .................. 161
ViewNX 2 ..............................................91
Vivid .................................................... 136
Volume ...........................................56, 90
VR ......................................................... 148

W
White balance .................................. 130
Wind noise reduction ................... 147
Wireless mobile adapter ....... 79, 171

Z
Zoom guide .........................................27
Zoom ring .................................. 27, 202

n
215

No reproduction in any form of this manual, in whole or in
part (except for brief quotation in critical articles or reviews),
may be made without written authorization from NIKON
CORPORATION.

SB2J01(11)

6MVA3611-01

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : Nikon Corporation
Create Date                     : 2012:10:09 13:20:24Z
Modify Date                     : 2012:11:30 16:19:01+01:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:56:37
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Creator Tool                    : FrameMaker 7.2
Metadata Date                   : 2012:11:30 16:19:01+01:00
Document ID                     : uuid:c3f49272-3baf-40f1-b169-9e5b520de0a3
Instance ID                     : uuid:6964a557-2bd9-294b-81af-8fa598c3e14c
Format                          : application/pdf
Title                           : 
Creator                         : Nikon Corporation
Page Layout                     : SinglePage
Page Mode                       : UseOutlines
Page Count                      : 236

EXIF Metadata provided by EXIF.tools

Nikon 1 V2 Reference Manual

1 V2 - Reference Manual 1V2RM_EN Free User Guide for Nikon 1 and COOLPIX Series Camera, Manual - page1

Navigation menu

Versions of this User Manual:

Views

Navigation