Nikon Coolpix L810 Users Manual

Nikon-Coolpix-L810-Users-Manual-346892 nikon-coolpix-l810-users-manual-346892

Nikon-L810-Owner-S-Manual nikon-l810-owner-s-manual

L810 to the manual a38989de-a571-4aa2-ba5f-75e2ca25459c

Coolpix L810 - User's Manual L810_EN Free User Guide for Nikon 1 and COOLPIX Series Camera, Manual - page1

2015-08-19

: Nikon Nikon-Coolpix-L810-Users-Manual-791430 nikon-coolpix-l810-users-manual-791430 nikon pdf

Open the PDF directly: View PDF PDF.
Page Count: 136 [warning: Documents this large are best viewed by clicking the View PDF Link!]

2012
No reproduction in any form of this manual, in whole or in part
(except for brief quotation in critical articles or reviews), may be
made without written authorization from NIKON CORPORATION.
Printed in Hong Kong
CT2A01(11)
6MM25811-01
DIGITAL CAMERA
User’s Manual
Trademark Information
•Microsoft, Windows and Windows Vista are either registered trademarks or trademarks of
Microsoft Corporation in the United States and/or other countries.
•Macintosh, Mac OS, and QuickTime are trademarks of Apple Inc., registered in the U.S. and
other countries.
•Adobe and Acrobat are registered trademarks of Adobe Systems Inc.
•SDXC, SDHC and SD Logos are trademarks of SD-3C, LLC.
•PictBridge is a trademark.
•HDMI, logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
•All other trade names mentioned in this manual or the other documentation provided with
your Nikon product are trademarks or registered trademarks of their respective holders.
AVC Patent Portfolio License
T
his product is licensed under the AVC Patent Portfolio License for the personal and
noncommercial use of a consumer to (i) encode video in compliance with the AVC standard
(“AVC video”) and/or (ii) decode AVC video that was encoded by a consumer engaged in a
personal and non-commercial activity and/or was obtained from a video provider licensed to
provide AVC video.
No license is granted or shall be implied for any other use.
Additional information may be obtained from MPEG LA, L.L.C.
See
http://www.mpegla.com
.
i
Introduction
Parts of the Camera
The Basics of Shooting and Playback
Shooting Features
Playback Features
Recording and Playing Back Movies
General Camera Setup
Technical Notes and Index
ii
Introduction
Introduction
Read This First
Thank you for purchasing the Nikon COOLPIX L810 digital camera. Before using the camera,
please read the information in “For Your Safety” (Aviii) and familiarize yourself with the
information provided in this manual. After reading, please keep this manual handy and refer
to it to enhance your enjoyment of your new camera.
Confirming the Package Contents
In the event that any items are missing, please contact the store where you purchased the
camera.
* The included batteries are for trial use only.
•A memory card is not included with the camera.
COOLPIX L810
Digital Camera
Camera Strap LR6/L40 (AA-size)
alkaline batteries (×4)*
Lens Cap LC-CP25
(with cord)
USB Cable UC-E16 Audio Video Cable
EG-CP16
ViewNX 2 Installer CD Reference Manual CD
•User's Manual (this manual) •Warranty
iii
Introduction
About This Manual
If you want to start using the camera right away, see “The Basics of Shooting and Playback”
(A9).
To learn about the parts of the camera and information that is displayed in the monitor, see
“Parts of the Camera” (A1).
About the Included “Reference Manual CD”
A PDF version of the COOLPIX L810 Reference Manual can be found on the included CD. Refer
to it for more detailed information.
Viewing the “Reference Manual CD”
The Reference Manual can be viewed using Adobe Reader, available for free download from
the Adobe website.
1 Start the computer and insert the “Reference Manual CD”.
2 Double-click the COOLPIX L810 CD icon (Windows 7/Windows Vista: in Computer;
Windows XP: in My Computer; Mac OS X: on the desktop).
3 Double-click the INDEX.pdf icon to display the language selection screen.
Click a language and follow the links to view the Reference Manual.
iv
Introduction
Other Information
•Symbols and Conventions
To make it easier to find the information you need, the following symbols and conventions
are used in this manual:
* Refer to the Reference Manual CD for pages indicated with E.
•SD, SDHC, and SDXC memory cards are referred to as “memory cards” in this manual.
•The setting at the time of purchase is referred to as the “default setting.”
•The names of menu items displayed in the camera monitor, and the names of buttons or
messages displayed on a computer monitor appear in bold.
•In this manual, images are sometimes omitted from monitor display samples so that
monitor indicators can be more clearly shown.
•Illustrations and monitor content shown in this manual may differ from the actual product.
Icon Description
BThis icon indicates cautions and information that should be read before using
the camera.
CThis icon indicates notes and information that should be read before using the
camera.
A/E/FThese icons indicate other pages containing relevant information;
E*: “Reference Section”, F: “Technical Notes and Index.”
v
Introduction
Information and Precautions
Life-Long Learning
As part of Nikon’s “Life-Long Learning” commitment to ongoing product support and education,
continually updated information is available online at the following sites:
•For users in the U.S.A.: http://www.nikonusa.com/
•For users in Europe and Africa: http://www.europe-nikon.com/support/
•For users in Asia, Oceania, and the Middle East: http://www.nikon-asia.com/
Visit these sites to keep up-to-date with the latest product information, tips, answers to frequently
asked questions (FAQs), and general advice on digital imaging and photography. Additional
information may be available from the Nikon representative in your area. Visit the site below for
contact information:
http://imaging.nikon.com/
Use Only Nikon Brand Electronic Accessories
Nikon COOLPIX cameras are designed to the highest standards and include complex electronic
circuitry. Only Nikon brand electronic accessories (including battery chargers, batteries, and AC
adapters) certified by Nikon specifically for use with this Nikon digital camera are engineered and
proven to operate within the operational and safety requirements of this electronic circuitry.
THE USE OF NON-NIKON ELECTRONIC ACCESSORIES COULD DAMAGE THE CAMERA AND MAY
VOID YOUR NIKON WARRANTY.
For more information about Nikon brand accessories, contact a local authorized Nikon dealer.
Before Taking Important Pictures
Before taking pictures on important occasions (such as at weddings or before taking the camera on
a trip), take a test shot to ensure that the camera is functioning normally. Nikon will not be held liable
for damages or lost profits that may result from product malfunction.
vi
Introduction
About the Manuals
•No part of the manuals included with this product may be reproduced, transmitted, transcribed,
stored in a retrieval system, or translated into any language in any form, by any means, without
Nikon’s prior written permission.
•Nikon reserves the right to change the specifications of the hardware and software described in
these manuals at any time and without prior notice.
•Nikon will not be held liable for any damages resulting from the use of this product.
•While every effort was made to ensure that the information in these manuals is accurate and
complete, we would appreciate it were you to bring any errors or omissions to the attention of the
Nikon representative in your area (address provided separately).
Notice Concerning Prohibition of Copying or Reproduction
Note that simply being in possession of material that was digitally copied or reproduced by means
of a scanner, digital camera or other device may be punishable by law.
•Items prohibited by law from being copied or reproduced
Do not copy or reproduce paper money, coins, securities, government bonds or local government
bonds, even if such copies or reproductions are stamped “Sample.” The copying or reproduction of
paper money, coins, or securities which are circulated in a foreign country is prohibited. Unless the
prior permission of the government was obtained, the copying or reproduction of unused postage
stamps or post cards issued by the government is prohibited.
The copying or reproduction of stamps issued by the government and of certified documents
stipulated by law is prohibited.
•Cautions on certain copies and reproductions
The government has issued cautions on copies or reproductions of securities issued by private
companies (shares, bills, checks, gift certificates, etc.), commuter passes, or coupon tickets, except
when a minimum of necessary copies are to be provided for business use by a company. Also, do
not copy or reproduce passports issued by the government, licenses issued by public agencies and
private groups, ID cards and tickets, such as passes and meal coupons.
vii
Introduction
•Comply with copyright notices
The copying or reproduction of copyrighted creative works such as books, music, paintings,
woodcut prints, maps, drawings, movies, and photographs is governed by national and international
copyright laws. Do not use this product for the purpose of making illegal copies or to infringe
copyright laws.
Disposing of Data Storage Devices
Please note that deleting images or formatting data storage devices such as memory cards or
built-in camera memory does not completely erase the original image data. Deleted files can
sometimes be recovered from discarded storage devices using commercially available software,
potentially resulting in the malicious use of personal image data. Ensuring the privacy of such data is
the user’s responsibility.
Before discarding a data storage device or transferring ownership to another person, erase all data
using commercial deletion software, or format the device and then completely refill it with images
containing no private information (for example, pictures of empty sky). Be sure to also replace any
pictures selected for the Select an image option in the Welcome screen setting (A88). Care
should be taken to avoid injury or damage to property when physically destroying data storage
devices.
viii
Introduction
For Your Safety
To prevent damage to your Nikon product or injury to yourself or to others, read
the following safety precautions in their entirety before using this equipment.
Keep these safety instructions where all those who use the product will read them.
WARNINGS
Turn off in the event of
malfunction
Should you notice smoke or an
unusual smell coming from the
camera or AC adapter, unplug the AC
adapter and remove the batteries
immediately, taking care to avoid
burns. Continued operation could
result in injury. After removing or
disconnecting the power source, take
the equipment to a Nikon-authorized
service representative for inspection.
Do not disassemble
Touching the internal parts of the
camera or AC adapter could result in
injury. Repairs should be performed
only by qualified technicians. Should
the camera or AC adapter break open
as the result of a fall or other accident,
take the product to a Nikon-authorized
service representative for inspection,
after unplugging the product and/or
removing the batteries.
Do not use the camera or AC
adapter in the presence of
flammable gas
Do not use electronic equipment in
the presence of flammable gas, as this
could result in explosion or fire.
Handle the camera strap with
care
Never place the strap around the neck
of an infant or child.
This icon marks warnings, information that should be read before using this Nikon
product, to prevent possible injury.
ix
Introduction
Keep out of reach of children
Particular care should be taken to
prevent infants from putting the
battery or other small parts into their
mouths.
Do not remain in contact with
the camera, battery charger,
or AC adapter for extended
periods while the devices are
on or in use
Parts of the devices become hot.
Leaving the devices in direct contact
with the skin for extended periods may
result in low-temperature burns.
Observe caution when
handling batteries
Batteries may leak or explode if
improperly handled. Observe the
following precautions when handling
batteries for use in this product:
•Before replacing the batteries, turn
the product off. If you are using an
AC adapter, be sure it is unplugged.
•Use only the batteries approved for
use in this product (A11). Do not
combine old and new batteries or
batteries of different makes or types.
•When charging Nikon EN-MH2
rechargeable Ni-MH batteries, use
only the specified charger and
charge the batteries four at a time.
When replacing the batteries with
EN-MH2-B2 batteries (available
separately), purchase two sets (total
of four batteries).
•The EN-MH2 rechargeable batteries
are for use with Nikon digital
cameras only, and are compatible
with COOLPIX L810.
•Insert batteries in the correct
orientation.
•Do not short or disassemble
batteries or attempt to remove or
break battery insulation or casing.
•Do not expose batteries to flame or
to excessive heat.
•Do not immerse in or expose to
water.
•Do not transport or store with metal
objects such as necklaces or
hairpins.
x
Introduction
•Batteries are prone to leakage when
fully discharged. To avoid damage
to the product, be sure to remove
the batteries when no charge
remains.
•Discontinue use immediately should
you notice any change in the
batteries, such as discoloration or
deformation.
•If liquid from damaged batteries
comes in contact with clothing or
skin, rinse immediately with plenty
of water.
Observe the following
precautions when handling
the Battery Chargers
(available separately)
•Keep dry. Failure to observe this
precaution could result in fire or
electric shock.
•Dust on or near the metal parts of
the plug should be removed with a
dry cloth. Continued use could
result in fire.
•Do not handle the power cable or
go near the battery charger during
lightning storms. Failure to observe
this precaution could result in
electric shock.
•Do not damage, modify, forcibly tug
or bend the power cable, place it
under heavy objects, or expose it to
heat or flame. Should the insulation
be damaged and the wires become
exposed, take it to a Nikon-
authorized service representative for
inspection. Failure to observe these
precautions could result in fire or
electric shock.
•Do not handle the plug or battery
charger with wet hands. Failure to
observe this precaution could result
in electric shock.
•Do not use with travel converters or
adapters designed to convert from
one voltage to another or with DC-
to-AC inverters. Failure to observe
this precaution could damage the
product or result in overheating or
fire.
xi
Introduction
Use appropriate cables
When connecting cables to the input
and output jacks, use only the cables
provided or sold by Nikon for the
purpose, to maintain compliance with
product regulations.
Handle moving parts with care
Be careful that your fingers or other
objects are not pinched by the lens
cover or other moving parts.
CD-ROMs
The CD-ROMs included with this device
should not be played back on audio CD
equipment. Playing CD-ROMs on an
audio CD player could cause hearing
loss or damage the equipment.
Observe caution when using
the flash
Using the flash close to your subject’s
eyes could cause temporary visual
impairment. Particular care should be
observed if photographing infants,
when the flash should be no less than
1 m (3 ft 4 in.) from the subject.
Do not operate the flash with
the flash window touching a
person or object
Failure to observe this precaution
could result in burns or fire.
Avoid contact with liquid
crystal
Should the monitor break, care should
be taken to avoid injury caused by
broken glass and to prevent liquid
crystal from the monitor touching the
skin or entering the eyes or mouth.
Turn the power off when
using inside an airplane or the
hospital
Turn the power off while inside the
airplane during take off or landing.
Follow the instructions of the hospital
when using while in a hospital. The
electromagnetic waves given out by
this camera may disrupt the electronic
systems of the airplane or the
instruments of the hospital.
xii
Introduction
3D Images
Do not continuously view 3D images
recorded with this device for extended
periods, whether on a television,
monitor, or other display.
In the case of children whose visual
systems are still maturing, consult a
pediatrician or ophthalmologist prior
to use and follow their instructions.
Prolonged viewing of 3D images may
cause eye strain, nausea, or discomfort.
Cease use should any of these
symptoms occur and consult a
physician if necessary.
xiii
Introduction
Notices
Notice for Customers in the
U.S.A.
Federal Communications
Commission (FCC) Radio
Frequency Interference Statement
This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to Part 15
of the FCC rules. These limits are
designed to provide reasonable
protection against harmful interference
in a residential installation. This
equipment generates, uses, and can
radiate radio frequency energy and, if
not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or
television reception, which can be
determined by turning the equipment
off and on, the user is encouraged to try
to correct the interference by one or
more of the following measures:
•Reorient or relocate the receiving
antenna.
•Increase the separation between the
equipment and receiver.
•Connect the equipment into an
outlet on a circuit different from that
to which the receiver is connected.
•Consult the dealer or an
experienced radio/television
technician for help.
CAUTIONS
Modifications
The FCC requires the user to be
notified that any changes or
modifications made to this device that
are not expressly approved by Nikon
Corporation may void the user’s
authority to operate the equipment.
xiv
Introduction
Interface Cables
Use the interface cables sold or
provided by Nikon for your equipment.
Using other interface cables may
exceed the limits of Class B Part 15 of
the FCC rules.
Notice for customers in the State of
California
WARNING
Handling the cord on this product will
expose you to lead, a chemical known
to the State of California to cause birth
defects or other reproductive harm.
Wash hands after handling.
Nikon Inc.,
1300 Walt Whitman Road Melville,
New York 11747-3064 USA
Tel: 631-547-4200
Notice for customers in Canada
CAUTION
This Class B digital apparatus complies
with Canadian ICES-003.
ATTENTION
Cet appareil numérique de la classe B
est conforme à la norme NMB-003 du
Canada.
xv
Introduction
Symbol for Separate Collection in
European Countries
This symbol indicates that
this product is to be
collected separately.
The following apply only to
users in European countries:
•This product is designated for
separate collection at an
appropriate collection point. Do not
dispose of as household waste.
•For more information, contact the
retailer or the local authorities in
charge of waste management.
This symbol on the battery
indicates that the battery is
to be collected separately.
The following apply only to
users in European countries:
•All batteries, whether marked with
this symbol or not, are designated
for separate collection at an
appropriate collection point. Do not
dispose of as household waste.
•For more information, contact the
retailer or the local authorities in
charge of waste management.
xvi
Introduction
Table of Contents
Introduction ................................................... ii
Read This First ....................................................... ii
Confirming the Package Contents................. ii
About This Manual.................................................. iii
Information and Precautions............................. v
For Your Safety ................................................. viii
WARNINGS ................................................................ viii
Notices................................................................. xiii
Parts of the Camera ..................................... 1
The Camera Body................................................. 2
Attaching the Camera Strap and Lens Cap
... 4
Raising and Lowering the Flash....................... 5
The Monitor ........................................................... 6
Shooting Mode .......................................................... 6
Playback Mode ........................................................... 8
The Basics of Shooting and Playback.... 9
Preparation 1 Insert the Batteries ............... 10
Applicable Batteries.............................................. 11
Preparation 2 Insert a Memory Card.......... 13
Internal Memory and Memory Cards......... 14
Approved Memory Cards.................................. 15
Preparation 3 Set the Display Language,
Date, and Time................................................... 16
Step 1 Turn the Camera On and Select
Shooting Mode.................................................. 20
Turning the Camera On and Off................... 22
Step 2 Frame a Picture .................................... 23
Using the Zoom...................................................... 24
Step 3 Focus and Shoot.................................. 26
The Shutter-release Button .............................. 27
Step 4 Play Back Images ................................. 29
Step 5 Delete Images....................................... 31
Shooting Features ..................................... 33
G (Easy Auto) Mode ....................................... 34
Changing
G
(Easy Auto) Mode Settings
... 34
Scene Mode (Shooting Suited to Scenes)
... 35
Changing Scene Mode Settings ................... 36
Characteristics of Each Scene ......................... 36
Smart Portrait Mode (Capturing Smiling
Faces)..................................................................... 44
Changing Smart Portrait Mode Settings
... 45
Options Available in the Smart Portrait
Menu.............................................................................. 46
Using Skin Softening ............................................ 47
A (Auto) Mode ................................................. 48
Changing A (Auto) Mode Settings........... 48
Options Available in the Auto Shooting
Menu.............................................................................. 49
Features That Can Be Set Using the Multi
Selector................................................................. 50
Available Features.................................................. 50
Using the Flash (Flash Modes)........................ 51
Using the Self-timer.............................................. 55
Using Macro Mode................................................ 57
Adjusting Brightness (Exposure
Compensation)........................................................ 59
Default Settings....................................................... 60
xvii
Introduction
Changing the Image Size (Image Mode)
.... 62
Image Mode Settings (Image Size and
Quality) ......................................................................... 62
Features That Cannot Be Used
Simultaneously .................................................. 64
Focusing............................................................... 65
Using Face Detection .......................................... 65
Focus Lock.................................................................. 66
Playback Features....................................... 67
Playback Zoom .................................................. 68
Thumbnail Display, Calendar Display........ 69
Features Available in Playback Mode
(Playback Menu)................................................ 70
Connecting the Camera to a TV, Computer,
or Printer .............................................................. 71
Using ViewNX 2 ................................................. 73
Installing ViewNX 2 ............................................... 73
Transferring Images to the Computer ...... 76
Viewing Images....................................................... 78
Recording and Playing Back Movies.... 79
Recording Movies ............................................. 80
Changing Movie Recording Settings (the
Movie Menu)............................................................. 83
Playing Back Movies ........................................ 84
General Camera Setup.............................. 87
The Setup Menu ................................................ 88
Refer to the Reference Manual CD for pages
indicated with E.
Reference Section................................. E1
Using Panorama Assist............................... E2
Taking 3D Pictures....................................... E5
Editing Still Images...................................... E8
Editing Features................................................. E8
I D-Lighting: Enhancing Brightness and
Contrast ............................................................... E10
e
Skin Softening: Softening Skin Tones
... E11
g Small Picture: Reducing the Size of an
Image.................................................................... E12
a Crop: Creating a Cropped Copy .... E13
Editing Movies ............................................ E15
Connecting the Camera to a TV (Viewing
Images on a TV) .......................................... E17
Connecting the Camera to a Printer
(Direct Print)................................................. E19
Connecting the Camera to a Printer
... E20
Printing Individual Images....................... E22
Printing Multiple Images .......................... E24
The Smart Portrait Menu......................... E27
Skin Softening.................................................. E27
Smile Timer........................................................ E28
Blink Proof .......................................................... E28
xviii
Introduction
The Shooting Menu
(for A (Auto) Mode)................................. E29
White Balance (Adjusting Hue) ............ E29
Continuous Shooting ................................. E32
ISO Sensitivity .................................................. E33
Color Options .................................................. E34
The Playback Menu ................................... E35
a Print Order (Creating a DPOF Print
Order).................................................................... E35
b Slide Show ................................................. E38
d Protect......................................................... E39
f Rotate Image ............................................ E41
h Copy (Copy Between Internal Memory
and Memory Card) ....................................... E42
The Movie Menu ........................................ E44
Movie Options................................................. E44
Autofocus Mode............................................ E45
Wind Noise Reduction............................... E45
The Setup Menu ......................................... E46
Welcome Screen............................................ E46
Time Zone and Date ................................... E47
Monitor Settings............................................ E51
Print Date (Imprinting Date and Time)
... E53
Vibration Reduction..................................... E54
Motion Detection.......................................... E55
AF Assist .............................................................. E56
Sound Settings ............................................... E57
Auto Off............................................................... E58
Format Memory/Format Card............... E59
Language ........................................................... E60
TV Settings......................................................... E61
Blink Warning................................................... E62
Eye-Fi Upload................................................... E64
Reset All ............................................................... E65
Battery Type...................................................... E68
Firmware Version........................................... E68
File and Folder Names.............................. E69
Optional Accessories ................................ E70
Error Messages............................................ E71
Technical Notes and Index .................. F1
Caring for the Product.................................. F2
The Camera ............................................................ F2
Batteries.................................................................... F4
Memory Cards ...................................................... F6
Cleaning and Storage................................... F7
Cleaning ................................................................... F7
Storage...................................................................... F7
Troubleshooting ............................................ F8
Specifications ............................................... F16
Supported Standards.................................... F20
Index................................................................ F21
1
Parts of the Camera
Parts of the Camera
This chapter describes the parts of the camera and explains information that is displayed in
the monitor.
The Camera Body....................................................2
Attaching the Camera Strap and Lens Cap..........................................4
Raising and Lowering the Flash ...............................................................5
The Monitor.............................................................6
Shooting Mode ..............................................................................................6
Playback Mode ...............................................................................................8
If you want to start using the camera right away, see “The Basics of Shooting and
Playback” (A9).
2
Parts of the Camera
Parts of the Camera
The Camera Body
15 1314
765 8
4321
9
10
11
12
1
Zoom control........................................................ 24
f: wide ............................................................. 24
g: tele................................................................ 24
h: thumbnail playback........................... 69
i: playback zoom...................................... 68
j: help .............................................................. 35
2Shutter-release button.................................... 26
3Self-timer lamp..................................................... 55
AF-assist illuminator.......................................... 88
4Power switch/power-on lamp ................... 20
5Speaker ..................................................................... 84
6Built-in microphone (stereo) ....................... 80
7Eyelet for camera strap.......................................4
8Flash .......................................................................5, 51
9
DC input connector (for AC adapter available
separately from Nikon)
...................... 12, E70
10
USB connector and audio/video output
...71
11 HDMI mini connector (Type C)...................71
12 Connector cover..................................................71
13 m (flash pop-up) button............................5, 51
14 Side zoom control ..............................................24
15 Lens
3
Parts of the Camera
10 911
5
7
6
432
8
1
12 13 14
1Monitor ........................................................................ 6
2A (shooting mode) button
.................................................................34, 35, 44, 48
3Flash lamp............................................................... 52
4b (e movie-record) button..................... 80
5c (playback) button....................................... 29
6Eyelet for camera strap ...................................... 4
7Multi selector
8k (apply selection) button
9Battery-chamber/
memory card slot cover..........................10, 13
10 l (delete) button...............................................31
11 d button ............................ 46, 49, 70, 83, 88
12 Tripod socket ..................................................F18
13 Battery chamber ..................................................10
14 Memory card slot ................................................13
4
Parts of the Camera
Attaching the Camera Strap and Lens Cap
Attach the lens cap to the camera strap, and then attach the strap to the camera.
Attach them at two places.
BLens Cap
•Remove the lens cap before you take a picture.
•At times when you will not be taking pictures such as when the power is off or while you are
carrying the camera, attach the lens cap to the camera to protect the lens.
5
Parts of the Camera
Raising and Lowering the Flash
Press the m (flash pop-up) button to raise the flash.
•Using the Flash (Flash Modes) ➝ A51
•Push the flash down gently to lower the flash until it clicks into place when not in use.
6
Parts of the Camera
The Monitor
•The information that is displayed in the monitor during shooting and playback changes
depending on the camera’s settings and state of use.
By default, information is displayed when the camera is turned on and when you operate
the camera, and turns off after a few seconds (Monitor settings (A88) > Photo info >
Auto info).
Shooting Mode
999
F3.1
+1.0
1/250
1600
29m 0s
10
10
999
9999
8
24
25
26
27
28
30 9
11
12
6
10
17
1 3
45
2021
2223
19 18
29
31
32
33
15
16
2
13
14
7
7
Parts of the Camera
1Shooting mode.............................34, 35, 44, 48
2Macro mode .......................................................... 57
3Zoom indicator............................................ 24, 57
4Focus indicator..................................................... 26
5AE/AF-L indicator.......................................... E3
6Flash mode.............................................................51
7Eye-Fi indicator .................................................... 89
8Battery level indicator...................................... 21
9Vibration reduction icon ................................ 88
10 Print date ................................................................. 88
11 Motion detection icon .................................... 88
12 Wind noise reduction ...................................... 83
13 “Date not set” indicator...........19, 88, E71
14 Travel destination indicator ......................... 88
15 Movie options....................................................... 83
16 Movie length ......................................................... 82
17 Image mode ..........................................................62
18 Number of exposures remaining
(still images)............................................................21
19 Internal memory indicator ............................21
20 Aperture value ......................................................27
21 Shutter speed........................................................27
22 Focus area........................................................23, 26
23 Focus area (face detection,
pet detection) ...............................................23, 26
24 ISO sensitivity.........................................................49
25 Exposure compensation value...................59
26 Color options.........................................................49
27 Skin softening........................................................46
28 White balance mode ........................................49
29 Continuous shooting mode ........................49
30 Blink proof icon ....................................................46
31 Self-timer indicator ............................................55
32 Smile timer..............................................................46
33 Pet portrait auto release .................................42
8
Parts of the Camera
Playback Mode
1 m 0 s
1m 0s
9 9 9 / 9 9 9
999/ 999
1 m 0 s
1m 0s
9999/9999
9999/9999
9999. JPG
9999. JPG
9 9 9 / 9 9 9
999/ 999
15/05/2012 12:00
15/05/2012 12:00
15
17
16
7
8
10
ba
1 2
3
4
12
14
9
6
11
13
5
1Date of recording ............................................... 16
2Time of recording...............................................16
3Battery level indicator...................................... 21
4Protect icon............................................................ 70
5Eye-Fi indicator .................................................... 89
6Print order icon.................................................... 70
7Image mode ..........................................................62
8Movie options....................................................... 83
9
(a) Current image number/
total number of images.......................... 29
(b) Movie length................................................. 84
10 Internal memory indicator ............................29
11 Movie playback indicator...............................84
12 Volume indicator.................................................85
13 D-Lighting icon ....................................................70
14 Small picture icon...............................................70
15 Skin softening icon ............................................70
16 3D image indicator............................................43
17 File number and type.............................. E69
9
The Basics of Shooting and Playback
The Basics of Shooting and
Playback
Preparation
Preparation 1 Insert the Batteries ..................................................................................10
Preparation 2 Insert a Memory Card.............................................................................13
Preparation 3 Set the Display Language, Date, and Time.....................................16
Shooting
Step 1 Turn the Camera On and Select Shooting Mode........................................20
Step 2 Frame a Picture .......................................................................................................23
Step 3 Focus and Shoot.....................................................................................................26
Playback
Step 4 Play Back Images ....................................................................................................29
Step 5 Delete Images..........................................................................................................31
10
The Basics of Shooting and Playback
The Basics of Shooting and Playback
Preparation 1 Insert the Batteries
1Open the battery-chamber/memory card slot
cover.
•Before opening the battery-chamber/memory card slot cover,
hold the camera upside down to prevent the batteries from
falling out.
2Insert the batteries.
•Confirm that the positive (+) and negative (–) terminals are
oriented correctly as described on the label at the entrance of
the battery chamber, and insert the batteries.
3Close the battery-chamber/memory card slot
cover.
•Slide the cover while securely holding down the area marked
2.
1
3
2
3
1
2
11
The Basics of Shooting and Playback
Applicable Batteries
•Four LR6/L40 (AA-size) alkaline batteries (batteries included)
•Four FR6/L91 (AA-size) lithium batteries
•Four EN-MH2 rechargeable Ni-MH (nickel metal hydride) batteries
* EN-MH1 rechargeable Ni-MH batteries cannot be used.
BRemoving the Batteries
•Turn the camera off and be sure that the power-on lamp and the monitor have turned off before
opening the battery-chamber/memory card slot cover.
•The camera, batteries, or memory card may be hot immediately after using the camera. Observe
caution when removing the batteries or memory card.
BNotes About the Batteries
•Be sure to read and follow the warnings for the battery on page ix and in “Batteries” (F4) before
use.
•Do not combine old and new batteries or batteries of different makes or types.
•Batteries with the following defects cannot be used:
BBattery Type
By setting Battery type in the setup menu (A88) to match the type of batteries inserted in the
camera, the batteries can perform more efficiently.
T
he default setting is the type of battery included with purchase. When any other type of battery is
used, turn the camera on and change the setting.
Batteries with insulation that
does not cover the area around
the negative terminal
Batteries with peeling Batteries with a flat
negative terminal
12
The Basics of Shooting and Playback
BNotes About EN-MH2 Rechargeable Batteries
When using EN-MH2 batteries with the COOLPIX L810, charge the batteries four at a time using
Battery Charger MH-73 (A89, E70).
CAlkaline Batteries
Performance of alkaline batteries may vary greatly depending on the manufacturer. Choose a
reliable brand.
CNotes About an AC Power Source
•You can use the AC Adapter EH-67 (available separately; E70) to power the camera from an
electrical outlet.
•Do not, under any circumstances, use another make or model of AC adapter other than the EH-67.
Failure to observe this precaution could result in overheating or in damage to the camera.
13
The Basics of Shooting and Playback
Preparation 2 Insert a Memory Card
1Turn off the camera and open the battery-
chamber/memory card slot cover.
•When the camera turns off, the power-on lamp and the
display turn off.
•Before opening the battery-chamber/memory card slot cover,
hold the camera upside down to prevent the batteries from
falling out.
2Insert a memory card.
•Slide the memory card in until it clicks into place.
BInserting a Memory Card
Inserting a memory card upside down or backwards could
damage the camera and the memory card. Be sure to check
that the memory card is in the correct orientation.
3Close the battery-chamber/memory card slot
cover.
•Slide the cover while securely holding down the area marked
2.
1
3
2
3
1
2
14
The Basics of Shooting and Playback
Removing the Memory Card
•Turn the camera off and be sure that the power-on lamp and the
monitor have turned off before opening the battery-chamber/
memory card slot cover.
Gently push the memory card into the camera (1) to partially
eject the card, and then remove the card (2). Do not pull it at an
angle.
•The camera, battery, and memory card may be hot immediately
after using the camera. Observe caution when removing the
battery or memory card.
Internal Memory and Memory Cards
Camera data, including images and movies, can be saved in either the camera’s internal
memory (approximately 50 MB) or on a memory card. Remove the memory card to use the
internal memory for image saving and playback.
BFormatting a Memory Card
•The first time you insert a memory card that has been used in another device into this camera, be
sure to format it with this camera.
•All data stored on a memory card is permanently deleted when the card is formatted.
Copy any data on the card that you wish to keep to a computer before formatting.
•To format a memory card, insert the card into the camera, press the d button, and select
Format card (E59) in the setup menu (A88).
BNotes About Memory Cards
See “Memory Cards” (F6) and the documentation included with your memory card for more
information.
12
15
The Basics of Shooting and Playback
Approved Memory Cards
The following Secure Digital (SD) memory cards have been tested and approved for use in
this camera.
•Memory cards with an SD Speed Class rating of 6 or faster are recommended for recording
movies. When using a memory card with a lower Speed Class rating, movie recording may
stop unexpectedly.
1If the memory card will be used with a card reader or similar device, make sure that the device
supports 2 GB cards.
•Contact the manufacturer for details on the above cards. We cannot guarantee camera
performance when using memory cards made by other manufacturers.
SD memory card SDHC memory card 2 SDXC memory card 3
SanDisk 2 GB14 GB, 8 GB, 16 GB, 32 GB 64 GB
TOSHIBA 2 GB14 GB, 8 GB, 16 GB, 32 GB 64 GB
Panasonic 2 GB14 GB, 8 GB, 12 GB, 16 GB,
32 GB 48 GB, 64 GB
Lexar – 4 GB, 8 GB, 16 GB, 32 GB 64 GB, 128 GB
2SDHC compliant.
If the memory card will be used with a card reader or similar device, make sure that the
device supports SDHC.
3SDXC compliant.
If the memory card will be used with a card reader or similar device, make sure that the
device supports SDXC.
16
The Basics of Shooting and Playback
Preparation 3 Set the Display Language, Date, and Time
When the camera is turned on for the first time, the language-selection screen and the date
and time setting screen for the camera clock are displayed.
1Press the power switch to turn on the camera.
•When the camera is turned on, the power-on lamp (green)
will light and then the monitor will turn on (the power-on
lamp turns off when the monitor turns on).
2Press the multi selector H or I to
select the desired language and press
the k button.
3Press H or I to select Yes and press the k
button.
Cancel
Language
Yes
No
Choose time zone and
set date and time?
Time zone and date
Cancel
17
The Basics of Shooting and Playback
4Press J or K to select your home
time zone and press the k
button.
•Press H to enable daylight saving time.
When the daylight saving time function is
enabled, W is displayed at the top of the
monitor. Press I to disable the daylight
saving time function.
5Press H or I to select the date format and
press the k button.
6Press H, I, J, or K to set the date and time,
and press the k button.
•Select an item: Press K or J (changes between D, M, Y,
hour, and minute).
•Edit the date and time: Press H or I.
•Confirm the setting: Select the minute setting and press
the k button.
7Press H or I to select Yes and then press the
k button.
Back
London
Casablanca
Date format
Year/Month/Day
Month/Day/Year
Day/Month/Year
Date and time
DMY
2012
01
01
00
00
Edit
No
Date and time
Yes
OK?
15/05/2012 15:30
18
The Basics of Shooting and Playback
8Make sure that the lens cap has been
removed, then press the A button.
•The lens extends and the shooting-mode selection screen
is displayed.
9When Easy auto mode is displayed, press the
k button.
•The camera enters the shooting mode and you can take
pictures in Easy auto mode (A20).
•To switch to another shooting mode, press the multi
selector H or I before pressing the k button.
Press this button in
shooting mode for
shooting-mode
selection menu.
Easy auto mode
19
The Basics of Shooting and Playback
CChanging the Language Setting and the Date and Time Setting
•You can change these settings using the Language (E60) and Time zone and date (E47)
settings in the zsetup menu (A88).
•You can enable and disable daylight saving time by selecting the z setup menu > Time zone
and date (E47) > Time zone. When enabled, the clock moves forward one hour; when
disabled, the clock moves back one hour. When the travel destination (x) is selected, the time
difference between the travel destination and the home time zone (w) is automatically calculated
and the date and time in the selected region are saved at the time of shooting.
•If you exit without setting the date and time, O will flash when the shooting screen is displayed.
Use the Time zone and date setting in the setup menu to set the date and time (A88, E47).
CThe Clock Battery
•The camera’s clock is powered by a backup battery that is separate from the camera’s main
battery.
•The backup battery charges when the main battery is inserted into the camera or when the
camera is connected to an optional AC adapter, and can provide several days of backup power
after about ten hours of charging.
•If the camera’s backup battery becomes exhausted, the date and time setting screen is displayed
when the camera is turned on. Set the date and time again. ➝ Step 3 of “Preparation 3 Set the
Display Language, Date, and Time” (A16)
CImprinting the Shooting Date in Printed Images
•Set the date and time before shooting.
•You can permanently imprint the shooting date in images as they are captured by setting Print
date (E53) in the setup menu (A88).
•If you want the shooting date to be printed without using the Print date setting, print using the
ViewNX 2 software (A73).
20
The Basics of Shooting and Playback
Step 1 Turn the Camera On and Select Shooting Mode
1Remove the lens cap and press the power
switch to turn on the camera.
•The lens extends and the monitor turns on.
•Press the m (flash pop-up) button to raise the flash (A5).
2Press the A button.
•The shooting-mode selection menu, which allows you to
select the desired shooting mode, is displayed.
3Press the multi selector H or I to
select the desired shooting mode
and press the k button.
•G (easy auto) mode is used in this example.
Easy auto mode
21
The Basics of Shooting and Playback
4Check the battery level indicator and the
number of exposures remaining.
Battery Level Indicator
Number of Exposures Remaining
The number of pictures that can be taken is displayed.
•C is displayed when no memory card is inserted in the camera, and images will be saved in
the internal memory (approx. 50 MB).
•The number of exposures remaining depends on the amount of available memory in the
internal memory or memory card, and also varies depending on the image quality and
image size (determined by the image mode setting; A63).
Display Description
bBattery level high.
BBattery level low.
Prepare to replace the batteries.
Battery
exhausted.
Cannot take pictures.
Replace the batteries.
9 7 0
970
2 9 m 0 s
29m 0s
Battery level indicator
Number of exposures
remaining
CNotes About the Flash
In situations where you want to use the flash, such as in dark locations or when the subject is backlit,
press the m (flash pop-up) button to raise the flash (A5, 51).
T
he flash does not pop-up automatically. When the flash is lowered, the flash does not fire no matter
what the shooting conditions are.
22
The Basics of Shooting and Playback
Turning the Camera On and Off
•Remove the lens cap and turn the camera on.
•When the camera is turned on, the power-on lamp (green) will light and then the monitor
will turn on (the power-on lamp turns off when the monitor turns on).
•To turn off the camera, press the power switch. When the camera turns off, the power-on
lamp and the monitor turn off.
•You can press and hold the c (playback) button to turn on the camera and switch to
playback mode. The lens will not extend.
BIf Turn the camera off, remove the lens cap, and turn the camera on. Is Displayed
Make sure that the lens cap has been removed, and turn the camera off and then on again.
CPower Saving Function (Auto Off)
If no operations are performed for a while, the monitor will turn off, the camera will enter standby
mode, and the power-on lamp will flash. If no operations are performed for approximately another
three minutes, the camera will turn off automatically.
While the camera is in standby mode, the monitor turns back on if you perform any of the following
operations:
➝Press the power switch, shutter-release button, A (shooting mode) button, c (playback)
button, or b(e movie-record) button
•The time that elapses before the camera enters standby mode can be changed using the Auto off
setting in the setup menu (A88).
•By default, the camera enters standby mode in about 30 seconds when you are using shooting
mode or playback mode.
•If you are using the optional AC Adapter EH-67, the camera enters standby mode after 30 minutes.
9 7 0
970
2 9m 0s
29m 0s
Flashes
No operations
performed
No operations
performed
3 min
Camera enters
standby mode.
Camera turns off.
23
The Basics of Shooting and Playback
Step 2 Frame a Picture
1Hold the camera steady.
•Keep fingers, hair, the camera strap, and other objects away
from the lens, flash, AF assist-illuminator, and microphone.
2Frame the picture.
•When the camera determines the scene mode, the
shooting mode icon will change (A34).
•When the camera detects a human face, that face is framed
by a yellow double border (focus area).
•When shooting non-human subjects or when no faces are
detected, the camera focuses on the subject in the center
of the frame. Position the main subject near the center of
the frame.
9 7 0
970
2 9 m 0 s
29m 0s
Shooting mode icon
24
The Basics of Shooting and Playback
Using the Zoom
Use the zoom control to activate optical zoom.
•To zoom in closer to the subject, rotate the
zoom control to g (telephoto).
•To zoom out and view a larger area, rotate the
zoom control to f (wide-angle).
When you turn the camera on, the zoom
moves to the maximum wide-angle position.
•The side zoom control (A2) can also be
turned toward g or f to operate the zoom.
•A zoom indicator is displayed at the top of the
monitor when the zoom control is operated.
BEasy Auto Mode
•Depending upon shooting conditions, the camera may not select the desired scene mode. In this
case, select another shooting mode (A34, 35, 44, and 48).
•When the digital zoom is in effect, the scene mode changes to U.
CWhen Using a Tripod
•We recommend using a tripod to stabilize the camera in the following situations:
- When shooting in dimly lit conditions with the flash mode (A53) set to W (off)
- When zooming in on the subject
•Set Vibration reduction to Off in the setup menu (A88) when using a tripod.
Zoom out Zoom in
f
Zoom out
g
Zoom in
Optical zoom Digital zoom
25
The Basics of Shooting and Playback
Digital Zoom
When the camera is zoomed in to the maximum optical zoom position, rotating and holding
the zoom control or the side zoom control toward g triggers digital zoom.
Digital zoom can magnify the subject up to about 4× beyond the maximum magnification of
the optical zoom.
•When you are using digital zoom, the camera focuses on the subject in the center of the
frame and the focus area is not displayed.
Maximum optical zoom Digital zoom enabled
CDigital Zoom and Interpolation
Unlike optical zoom, digital zoom uses a digital imaging process known as interpolation to magnify
images, resulting in slight deterioration of picture quality according to the image mode (A62) and
digital zoom magnification.
Interpolation is applied at zoom positions beyond V when taking still pictures. When zoom is
increased beyond the V position, interpolation is initiated and the zoom indicator turns yellow to
indicate that interpolation is being applied.
T
he position of V moves to the right as image size decreases, allowing you to confirm the zoom
position at which shooting without interpolation is possible at the current image mode setting.
Small image size
26
The Basics of Shooting and Playback
Step 3 Focus and Shoot
1Press the shutter-release button halfway
(A27).
•When a face is detected:
The camera focuses on the face framed by the double
border. When the subject is in focus, the double border
glows green.
•When a face is not detected:
The camera focuses on the subject in the center of the
frame. When the camera has focused, the focus area glows
green.
•
When you are using digital zoom, the camera focuses on the subject in the center of the frame and the
focus area is not displayed. When the camera has focused, the focus indicator (
A
6) glows green.
•While the shutter-release button is pressed halfway, the focus area or focus indicator may
flash in red. This indicates that the camera is unable to focus. Modify the composition and
press the shutter-release button halfway again.
2Press the shutter-release button the rest of
the way down (A27).
•The shutter is released and the image will be saved to the
memory card or internal memory.
F 3.1
F 3.1
1/250
1/250
F 3.1
F 3.1
1/250
1/250
27
The Basics of Shooting and Playback
The Shutter-release Button
Press halfway
To set focus and exposure (shutter speed and aperture value),
press the shutter-release button halfway, stopping when you feel
resistance. Focus and exposure remain locked while the shutter-
release button is pressed halfway.
Press all the way
While pressing the shutter-release button halfway, press the
shutter-release button the rest of the way down to release the
shutter and take a picture.
Do not use force when pressing the shutter-release button, as this
may result in camera shake and blurred images. Press the button
gently.
BNotes About Saving Data
After taking pictures or recording a movie, the number of exposures remaining or the remaining
recording time flashes while images or movies are being saved. Do not open the battery-
chamber/memory card slot cover while images or movies are being saved. Image and movie data
could be lost and the camera or memory card could be damaged.
28
The Basics of Shooting and Playback
BAutofocus
T
he camera may not focus as expected in the following situations. In some rare cases, the subject
may not be in focus despite the fact that the focus area or the focus indicator glows green:
•Subject is very dark
•Objects of sharply differing brightness are included in the scene (e.g. the sun behind the subject
makes that subject appear very dark)
•No contrast between the subject and surroundings (e.g. a portrait subject, wearing a white shirt, is
standing in front of a white wall)
•Several objects are at different distances from the camera (e.g. the subject is inside a cage)
•Subjects with repeating patterns (window blinds, buildings with multiple rows of similarly shaped
windows, etc.)
•Subject is moving rapidly
In the situations noted above, try pressing the shutter-release button halfway to refocus several
times, or select auto mode and use focus lock (A66) to take the picture by first focusing on an
object that is the same distance from the camera as the desired subject.
BNotes About Face Detection
See “Using Face Detection” (A65) for more information.
CAF-assist Illuminator and Flash
If the subject is dimly lit, the AF-assist illuminator (A88) may light when the shutter-release button
is pressed halfway, and the flash (A51) may fire when the shutter-release button is pressed all the
way down.
CTo Make Sure You Do Not Miss a Shot
If you are concerned that you might miss a shot, press the shutter-release button all the way without
first pressing it halfway.
29
The Basics of Shooting and Playback
Step 4 Play Back Images
1Press the c (playback) button.
•The camera switches to playback mode and the last image
saved is displayed in full-frame playback mode.
2Use the multi selector to select an image to
display.
•Display the previous image: H or J
•Display the next image: I or K
•Remove the memory card from the camera to play back
images saved in the camera’s internal memory. C is
displayed near the current image number/total number of
images display.
•To return to shooting mode, press the A button, the
shutter-release button, or the b(e movie-record)
button.
c
(playback)
button
Display the previous image
Display the next image
4/ 4
4/ 4
15/05/2012 15:30
15/05/2012 15:30
0004. JPG
0004. JPG
Current image number/
total number of images
30
The Basics of Shooting and Playback
CViewing Images
•Images may be displayed briefly at low resolution while being read from the memory card or
internal memory.
•When you play back images in which the face of a person (A65) or pet (A42) was detected at
the time of shooting, depending on the orientation of the detected face, the images are
automatically rotated for playback display.
CMore Information
•Playback Zoom➝ A68
•Thumbnail Display, Calendar Display➝ A69
•Features Available in Playback Mode (Playback Menu)➝ A70
31
The Basics of Shooting and Playback
Step 5 Delete Images
1Press the l button to delete the image
currently displayed in the monitor.
2Press the multi selector H or I to select the
desired deletion method and press the k
button.
•Current image: Only the current image is deleted.
•Erase selected images: Multiple images can be selected
and deleted (A32).
•All images: All images are deleted.
•To exit without deleting, press the d button.
3Press H or I to select Yes and press the k
button.
•Deleted images cannot be recovered.
•To cancel, press H or I to select No and press the k
button.
Current image
All images
Erase selected images
Delete
Yes
No
Erase 1 image?
32
The Basics of Shooting and Playback
Operating the Erase Selected Images Screen
1Press the multi selector J or K to select an
image to be deleted, and then press H to
display y.
•To undo the selection, press I to remove y.
•Rotate the zoom control (A2) to g (i) to switch back to
full-frame playback or f (h) to display thumbnails.
2Add y to all images that you want to delete and then press the k
button to confirm the selection.
•A confirmation dialog is displayed. Follow the instructions displayed in the monitor.
ON/OFF
Back
Erase selected images
BNotes About Deletion
•Deleted images cannot be recovered. Copy important images to a computer before deleting
them from the camera.
•Protected images (A70) cannot be deleted.
CDeleting the Last Image Captured While in Shooting Mode
When using shooting mode, press the l button to delete the last image that was saved.
33
Shooting Features
Shooting Features
This chapter describes the camera’s shooting modes and the features that are available when
using each shooting mode.
You can select shooting modes and adjust settings according to the shooting conditions and
the kind of images you want to capture.
G (Easy Auto) Mode............................................ 34
Scene Mode (Shooting Suited to Scenes) .......... 35
Smart Portrait Mode (Capturing Smiling Faces)
... 44
A (Auto) Mode .................................................... 48
Features That Can Be Set Using the Multi Selector
.... 50
Using the Flash (Flash Modes) ............................................................... 51
Using the Self-timer................................................................................... 55
Using Macro Mode..................................................................................... 57
Adjusting Brightness (Exposure Compensation)............................ 59
Changing the Image Size (Image Mode)............ 62
Features That Cannot Be Used Simultaneously
..... 64
Focusing ............................................................... 65
34
Shooting Features
Shooting Features
G (Easy Auto) Mode
The camera automatically selects the optimum scene mode when you frame a picture.
Automatic Scene Selection
The camera automatically selects one of the following scenes when you point the camera at a
subject:
•e Portrait (A36)
•f Landscape (A36)
•h Night portrait (A37)
•g Night landscape (A39)
•i Close-up (A39)
•j Backlighting (A40)
•U Other scenes
Changing G (Easy Auto) Mode Settings
•Depending on the scene selected by the camera, you can press the multi selector H (X),
J (n), and K (o) to set the corresponding features. ➝“Features That Can Be Set Using
the Multi Selector” (A50), “Default Settings” (A60)
•Features that can be set by pressing the d button ➝Image mode, which is the
combination of image size and image quality (A62)
Enter shooting mode M A (shooting mode) button M G (easy auto) mode M
k button
35
Shooting Features
Scene Mode (Shooting Suited to Scenes)
When one of the following scenes is selected, camera settings are automatically optimized for
the selected scene.
* The icon of the last scene selected is displayed.
Enter shooting mode M A (shooting mode) button M b (second icon from the top*) M
K M H, I, J, K M select a scene M k button
bPortrait
(default setting;
A36)
cLandscape
(A36)
dSports
(A37)
eNight portrait
(A37)
fParty/indoor
(A37)
ZBeach
(A38)
zSnow
(A38)
hSunset
(A38)
iDusk/dawn
(A38)
jNight landscape
(A39)
kClose-up
(A39)
uFood
(A39)
lMuseum
(A40)
mFireworks show
(A40)
n
Black and white copy
(A40)
oBacklighting
(A40)
UPanorama assist
(A41)
OPet portrait
(A42)
s3D photography
(A43)
CTo View a Description (Help Display) of Each Scene
Select the desired scene from the scene selection screen and rotate
the zoom control (A2) to g (j) to view a description of that
scene. To return to the original screen, rotate the zoom control to g
(j) again.
Panorama assist
36
Shooting Features
Changing Scene Mode Settings
•Depending on the scene, the multi selector H (X), I (p), J (n), and K (o) can be used
to set the corresponding features. ➝ “Features That Can Be Set Using the Multi Selector”
(A50), “Default Settings” (A60)
•Features that can be set by pressing the d button ➝ Image mode, which is the
combination of image size and image quality (A62)
Characteristics of Each Scene
b Portrait
Use this mode for portraits.
•When the camera detects a human face, it focuses on that face
(A65).
•You can use the skin softening option to smooth the skin tones
in human faces (A47).
•If no faces are detected, the camera focuses on the subject in
the center of the frame.
•Digital zoom cannot be used.
c Landscape
Use this mode for vivid landscapes and cityscapes.
•The focus area or focus indicator (A7) always glows green
when the shutter-release button is pressed halfway.
O: Use of a tripod is recommended when using scene modes indicated with O. Set Vibration
reduction to Off in the setup menu (A88) when using a tripod to stabilize the camera during
shooting.
37
Shooting Features
dSports
Use this mode when shooting sporting events. The camera
captures a series of still images that allow you to clearly see
detailed movements in a moving subject.
•The camera focuses on the area in the center of the frame.
•Press and hold the shutter-release button all the way to capture
images continuously. Up to about four images are captured
continuously at a rate of about 1.2 fps (when Image mode is
set to P).
•The camera focuses even when the shutter-release button is not pressed halfway. You may hear
the sound of the camera focusing.
•Focus, exposure, and hue are fixed at the values determined with the first image in each series.
•The frame rate with continuous shooting may vary depending upon the current image mode
setting, the memory card used, or shooting condition.
e Night portrait
Use this mode for evening and night portraits that include
background scenery. The flash fires to light the portrait subject while
preserving background lighting to achieve a natural balance
between the main subject and background ambience.
•Raise the flash before shooting.
•When the camera detects a human face, it focuses on that face
(A65).
•You can use the skin softening option to smooth the skin tones in human faces (A47).
•If no faces are detected, the camera focuses on the subject in the center of the frame.
•Digital zoom cannot be used.
f Party/indoor
Suitable for taking pictures at parties. Captures the effects of
candlelight and other indoor background lighting.
•The camera focuses on the area in the center of the frame.
•As images are easily affected by camera shake, hold the camera
steadily. Set Vibration reduction to Off in the setup menu
(A88) when using a tripod to stabilize the camera during
shooting.
O
38
Shooting Features
Z Beach
Captures the brightness of such subjects as beaches or sunlit
expanses of water.
•The camera focuses on the area in the center of the frame.
z Snow
Captures the brightness of sunlit snow.
•The camera focuses on the area in the center of the frame.
h Sunset
Preserves the deep hues seen in sunsets and sunrises.
•The camera focuses on the area in the center of the frame.
i Dusk/dawn
Preserves the colors seen in the weak natural light before sunrise
or after sunset.
•The focus area or focus indicator (A7) always glows green
when the shutter-release button is pressed halfway.
O
O
O: Use of a tripod is recommended when using scene modes indicated with O. Set Vibration
reduction to Off in the setup menu (A88) when using a tripod to stabilize the camera during
shooting.
39
Shooting Features
j Night landscape
Slow shutter speeds are used to capture stunning night
landscapes.
•The focus area or focus indicator (A7) always glows green
when the shutter-release button is pressed halfway.
k Close-up
Use this mode to photograph flowers, insects, and other small
objects at close range.
•Macro mode (A57) is enabled and the camera automatically
zooms to the closest position at which it can focus.
•The camera focuses on the area in the center of the frame. Use
focus lock to frame the picture on an object not in the center of
the frame (A66).
•The camera focuses even when the shutter-release button is not pressed halfway. You may hear
the sound of the camera focusing.
u Food
Use this mode when taking pictures of food.
•Macro mode (A57) is enabled and the camera automatically
zooms to the closest position at which it can focus.
•You can adjust hue by pressing the multi selector H and I. The
hue setting is saved in the camera’s memory even after the
camera is turned off.
•The camera focuses on the area in the center of the frame. Use
focus lock to frame the picture on an object not in the center of
the frame (A66).
•The camera focuses even when the shutter-release button is not
pressed halfway. You may hear the sound of the camera
focusing.
O
9 7 0
970
2 9 m 0 s
29m 0s
40
Shooting Features
l Museum
Use indoors where flash photography is prohibited (for example, in
museums and art galleries) or in other settings in which you do not
want to use the flash.
•The camera focuses on the area in the center of the frame.
•
The camera captures a series of up to ten images while the shutter-
release button is held all the way down, and the sharpest image in
the series is automatically selected and saved (best shot selector).
m Fireworks show
Slow shutter speeds are used to capture the light from fireworks.
•Camera focuses at infinity.
•When the shutter-release button is pressed halfway, the focus
indicator (A7) always glows green.
n Black and white copy
Provides clear images of text or drawings on a whiteboard or in
print.
•The camera focuses on the area in the center of the frame.
•Use together with macro mode (A57) when shooting
subjects that are close to the camera.
o Backlighting
Use when light is coming from behind the subject, throwing
features or details into shadow. The flash fires automatically to “fill
in” (illuminate) shadows.
•Raise the flash before shooting.
•The camera focuses on the area in the center of the frame.
O
O: Use of a tripod is recommended when using scene modes indicated with O. Set Vibration
reduction to Off in the setup menu (A88) when using a tripod to stabilize the camera during
shooting.
41
Shooting Features
U Panorama assist
Use this setting to capture a series of images that will be connected using a computer to form a
panorama image (E2).
•Press the multi selector H, I, J, or K to select the direction that you will move the camera in
when capturing images, and press the k button.
•After shooting the first image, confirm on the screen how the captured image will be
connected to the next image, and shoot the next image. Shoot as many images as needed to
complete the panorama. To finish shooting, press the k button.
•Transfer the images to your computer and use the Panorama Maker 6 (A75, E4) software to
combine the images into a single panorama image.
42
Shooting Features
O Pet portrait
Use this mode when taking pictures of dogs or cats. When the
camera detects the face of a dog or cat, the camera focuses on that
face. Once the camera has focused, by default it automatically
releases the shutter (pet portrait auto release).
•From the screen displayed after the O Pet portrait scene
mode is selected, select Single or Continuous.
-Single: Images are captured one at a time.
-Continuous: Three images are captured continuously when a face is focused on (at a rate of
about 1.2 fps when Image mode is set to P 4608×3456).
•When the camera detects a face, a double border (focus area) is
displayed around the face, and the double border glows green
when the camera has focused.
The faces of up to five pets can be detected at the same time.
When the camera detects more than one face, the face
displayed largest in the monitor is framed by a double border
and the others by single borders.
•If no pet faces are detected, you can release the shutter by
pressing the shutter-release button.
- If no pet faces are detected, the camera focuses on the subject at the center of the frame.
- When Continuous is selected, up to about four images are captured continuously at a rate of
about 1.2 fps while the shutter-release button is held all the way down (when Image mode is
set to P 4608×3456).
•Press the multi selector J (n) to change auto release settings. When set to Off, the shutter is
released only when the shutter-release button is pressed.
•Pet portrait auto release turns off automatically when:
- Five bursts have been taken
- Internal memory or the memory card is full
To continue using Pet portrait auto release to take more pictures, press the multi selector J
(n) and change the setting again.
•Digital zoom cannot be used.
•Depending on the distance of the pet from the camera, the speed of the pet’s movement, the
direction the pet is facing, the ambient brightness of the pet’s face, etc., pet faces may not be
detected or other subjects may be displayed with a border.
9 7 0
970
2 9 m 0 s
29m 0s
43
Shooting Features
s 3D photography
Use this mode for taking 3D images viewable in three dimensions on a 3D-compatible TV or
monitor. The camera takes one picture for each eye to simulate a three-dimensional image.
Images taken in this mode are saved at an image size of n (1920 × 1080).
•After taking the first picture, move the camera horizontally to the right so that the subject is
aligned with the guide on the monitor. The camera takes the second picture automatically.
•The camera focuses at the center of the frame for the first shot.
The focus, exposure, and white balance set for the first shot are used for the second shot.
•Digital zoom cannot be used.
•The telephoto zoom position is limited to the angle of view equivalent to that of a 132 mm lens
in 35mm [135] format.
•The angle of view (i.e., the area visible in the frame) seen in the saved image will be narrower
than that seen in the monitor at the time of shooting.
•The two captured images are saved as a 3D picture (MPO file) consisting of the left and right eye
images. The first image (the left eye image) is also saved as a JPEG file.
•3D images cannot be played back in 3D on the camera monitor. Only the left eye image of a 3D
image is displayed during playback.
•To view 3D images in 3D, connect the camera to a 3D-compatible TV or monitor using a 3D-
compatible HDMI cable and configure the camera as described below using TV settings in the
setup menu (A88).
-HDMI: Set to Auto (default setting) or 1080i.
-HDMI 3D output: Set to On (default setting).
•It may take a while to display images when switching between 3D images and non-3D images.
•Taking 3D Pictures ➝ E5
BNotes About Viewing 3D images
When viewing 3D images on a 3D-compatible TV or monitor for an extended period of time, you
may experience discomfort such as eye strain or nausea. Carefully read the documentation included
with your TV or monitor to ensure proper use.
44
Shooting Features
Smart Portrait Mode (Capturing Smiling Faces)
When the camera detects a smiling face, you can take a picture automatically without
pressing the shutter-release button (smile timer). You can use the skin softening option to
smooth the skin tones in human faces.
1Frame the picture.
•Raise the flash when using it (A5).
•When the camera detects a human face, a yellow double border (focus area) is displayed
around that face. When the camera has focused on that face, the double border will turn
green for a moment and focus is locked.
•Up to three faces can be detected. When the camera detects more than one face, a double
border is displayed around the face closest to the center of the frame, and single borders are
displayed around the other faces.
2Wait for the subject to smile. Do not press the shutter-release button.
•If the camera detects that the face framed by the double border is smiling, the Smile timer
(A46, E28) feature is activated and the shutter is automatically released.
•After the camera releases the shutter, it will continue to detect faces and smiles, and will
release the shutter again if it detects a smiling face.
3Shooting ends.
•Any of the following operations can be used to cancel smile detection and stop shooting.
-Turn the camera off.
-Set Smile timer (A46, E28) to Off.
-Press the A button and select a different shooting mode.
Enter shooting mode M A (shooting mode) button M F Smart portrait mode M
k button
45
Shooting Features
Changing Smart Portrait Mode Settings
•Features that can be set using the multi selector (A50) ➝ Flash mode (A51), self-timer
(A55), and exposure compensation (A59)
•Features that can be set by pressing the d button ➝ Options Available in the Smart
Portrait Menu (A46)
BNotes About Smart Portrait Mode
•Digital zoom cannot be used.
•Under some shooting conditions, the camera may be unable to detect faces or detect smiles.
•“Notes About Face Detection” ➝ A65
CAuto Off in Smile Timer Mode
When Smile timer is set to On, the auto off function (A88) is activated and the camera turns off
when either of the situations indicated below persists and no other operations are performed.
•The camera does not detect any faces.
•The camera detected a face, but cannot detect a smile.
CWhen the Self-timer Lamp Flashes
When using smile timer, the self-timer lamp flashes when the camera detects a face and flashes
quickly immediately after the shutter is released.
CReleasing the Shutter Manually
T
he shutter can also be released by pressing the shutter-release button. If no faces are detected, the
camera focuses on the subject at the center of the frame.
CFeatures That Cannot Be Used Simultaneously
Some settings cannot be used with other functions (A64).
46
Shooting Features
Options Available in the Smart Portrait Menu
When using F smart portrait mode, the following settings can be changed.
Enter smart portrait mode (A44) M d button M F tab
Option Description A
Image mode
Allows you to select the combination of image size and image quality
used when saving images (A62). If you change the image mode
setting, the new setting is applied to all shooting modes.
62
Skin softening Enable skin softening. Make the skin tones in human faces smoother.
The default setting is On.E27
Smile timer
When On (default setting) is selected, the camera detects human
faces and then automatically releases the shutter whenever a smile is
detected. Self-timer cannot be used with this feature.
E28
Blink proof
When On is selected, the camera automatically releases the shutter
twice each time a picture is taken. Of the two shots, the image in
which the subject’s eyes are more open compared to the other shot
is saved.
The flash cannot be used when On is selected.
The default setting is Off.
E28
Image mode
Skin softening
Smile timer
Smart portrait
Blink proof
CFeatures That Cannot Be Used Simultaneously
Some settings cannot be used with other functions (A64).
47
Shooting Features
Using Skin Softening
When the shutter is released in one of the following shooting modes, the camera detects one
or more human faces (up to three), and processes the image to soften facial skin tones.
•Portrait (A36) or Night portrait (A37) in G (easy auto) mode
•Portrait (A36) or Night portrait (A37) scene mode
•Smart portrait mode (A44)
Skin softening can also be applied to saved images (A70, E11).
BNotes About Skin Softening
•It may take more time than usual to save images after shooting.
•Under some shooting conditions, the desired skin softening results may not be achieved, or skin
softening may be applied to areas of the image where there are no faces.
48
Shooting Features
A (Auto) Mode
Used for general shooting. Settings can be adjusted in the shooting menu (A49) to suit the
shooting conditions and the type of shot you want to capture.
•The camera focuses on the area in the center of the frame.
Changing A (Auto) Mode Settings
•Features that can be set using the multi selector (A50) ➝ Flash mode (A51), self-timer
(A55), macro mode (A57), and exposure compensation (A59)
•Features that can be set by pressing the d button ➝ Options Available in the Auto
Shooting Menu (A49)
Enter shooting mode M A (shooting mode) button M A (auto) mode M k button
CFeatures That Cannot Be Used Simultaneously
Some settings cannot be used with other functions (A64).
49
Shooting Features
Options Available in the Auto Shooting Menu
When using A (auto) mode, the following settings can be changed.
Enter A (auto) mode (A48) M d button M A tab
Option Description A
Image mode
Allows you to select the combination of image size and image
quality used when saving images (A62).
This setting is also applied to other shooting modes.
62
White balance
Allows you to adjust white balance to suit the light source in order
to make the colors in images match what you see with your eye.
The available settings are Auto (default setting), Preset manual,
Daylight, Incandescent, Fluorescent, Cloudy, and Flash.
E29
Continuous Allows you to capture a series of images. The available settings are
Single (default setting), Continuous, BSS, and Multi-shot 16.E32
ISO sensitivity
Control the camera’s sensitivity to light. You can set sensitivity to
Auto (default setting), or lock the setting at 80, 100, 200, 400,
800, or 1600. When ISO sensitivity is set to Auto, the camera sets
the ISO sensitivity automatically, and E is displayed while
shooting when ISO sensitivity increases.
E33
Color options
Allows you to change the color tones of images. The available
settings are Standard color (default setting), Vivid color, Black-
and-white, Sepia, and Cyanotype.
E34
Image mode
White balance
Continuous
Shooting menu
ISO sensitivity
Color options
CFeatures That Cannot Be Used Simultaneously
Some settings cannot be used with other functions (A64).
50
Shooting Features
Features That Can Be Set Using the Multi Selector
When shooting, the multi selector H, I, J, and K can be used to set the following features.
Available Features
The features that are available vary with the shooting mode, as shown below.
•See “Default Settings” (A60) for information about each mode’s default settings.
1Can be set when the flash is raised. When the flash is lowered, flash mode is fixed at W (off).
2Varies by the scene selected by the camera. ➝ “Default Settings” (A60)
3Varies by the scene. ➝ “Default Settings” (A60)
4Varies by the smart portrait menu setting. ➝ “Default Settings” (A60)
G (easy
auto) Scene Smart
portrait A (auto)
XFlash mode1 (A51) w2
3
w4w
nSelf-timer (A55) ww
4w
Pet portrait auto release (A42) –––
pMacro (A57) ––w
oExposure compensation (A59) www
X (flash mode)
p (macro mode)
o (exposure compensation)
n (self-timer),
pet portrait auto release
51
Shooting Features
Using the Flash (Flash Modes)
In dark locations or when the subject is backlit, you can take pictures with flash by raising the
flash.
You can set the flash mode.
1Press the m (flash pop-up) button.
•The flash pops up.
•When the flash is lowered, flash mode is fixed at W (off).
2Press the multi selector H (m flash mode).
52
Shooting Features
3Press the multi selector H or I to select the
desired mode and press the k button.
•Available Flash Modes ➝ A53
•If a setting is not applied by pressing the k button within
a few seconds, the selection will be canceled.
•When U (auto) is applied, D is only displayed for a
few seconds, regardless of Monitor settings (A88,
E51).
Auto
BLowering the Flash
Push the flash down gently to lower the flash until it clicks into place when not in use (A5).
CThe Flash Lamp
T
he flash lamp indicates the status of the flash when you press the
shutter-release button halfway.
•On: The flash fires when a picture is taken.
•Flashing: The flash is charging. The camera cannot take pictures.
•Off: The flash will not fire when a picture is taken.
If the battery is low, the monitor will turn off while the flash is
charging.
CEffective Range of the Flash
When ISO sensitivity is set to Auto, the flash has a range of approx. 0.5 to 5.0 m (1 ft 8 in. to 16 ft) at
the maximum wide-angle zoom position and a range of approx. 1.5 to 2.5 m (5 ft to 8 ft 2 in.) at the
maximum telephoto zoom position.
53
Shooting Features
Available Flash Modes
UAuto
The flash fires automatically when lighting is dim.
VAuto with red-eye reduction
Reduce red-eye in portraits caused by the flash (A54).
WOff
The flash will not fire.
•We recommend using a tripod to stabilize the camera when shooting in dark
surroundings.
XFill flash
The flash fires whenever a picture is taken. Use to “fill-in” (illuminate) shadows and backlit
subjects.
YSlow sync
Auto flash mode is combined with slow shutter speed.
Suited to evening and night portraits that include background scenery.
The flash illuminates main subject; slow shutter speeds are used to capture background
at night or under dim lighting.
54
Shooting Features
CThe Flash Mode Setting
•The setting varies with the shooting mode.
➝ “Available Features” (A50)
➝ “Default Settings” (A60)
•Some settings cannot be used with other functions (A64).
•The flash mode setting applied in A (auto) mode is saved in the camera’s memory even after the
camera is turned off.
CRed-eye Reduction
T
his camera uses Advanced Red-Eye Reduction (In-Camera Red-Eye Fix).
Pre-flashes are fired repeatedly at low intensity before the main flash, reducing the red-eye effect.
Additionally, if the camera detects red eye while saving an image, the affected area will be processed
to reduce red-eye before the image is saved.
Note the following when shooting:
•Because pre-flashes are fired, there is a slight lag between when the shutter-release button is
pressed and when the shutter is released.
•More time than usual is required to save images.
•Red-eye reduction may not produce the desired results in all situations.
•In rare cases, areas of the image that are not affected by red-eye may be processed by red-eye
reduction. In these cases, select another flash mode and take the picture again.
55
Shooting Features
Using the Self-timer
The camera’s self-timer can release the shutter about ten seconds after you press the shutter-
release button.
The self-timer is useful when you want to be in the picture you are taking, or when you want
to avoid the effects of camera shake that occur when you press the shutter-release button.
When using the self-timer, use of a tripod is recommended. Set Vibration reduction to Off
in the setup menu (A88) when using a tripod to stabilize the camera during shooting.
1Press the multi selector J (n self-timer).
2Press the multi selector H or I to select ON
and press the k button.
•n10 is displayed.
•If a setting is not applied by pressing the k button within
a few seconds, the selection will be canceled.
•When the shooting mode is the Pet portrait scene mode,
Y (Pet portrait auto release) is displayed (A42). Self-
timer cannot be used.
3Frame the picture and press the
shutter-release button halfway.
•Focus and exposure will be set.
Self-timer
F 3.1
F 3.1
1/250
1/250
56
Shooting Features
4Press the shutter-release button the
rest of the way down.
•The self-timer starts, and the number of seconds
remaining before the shutter is released is
displayed in the monitor. The self-timer lamp
flashes while the timer is counting down. About
one second before the shutter is released, the
lamp stops flashing and glows steadily.
•When the shutter is released, the self-timer will
be set to OFF.
•To stop the timer before a picture is taken, press
the shutter-release button again.
F 3.1
F 3.1
1/250
1/250
57
Shooting Features
Using Macro Mode
When using macro mode, the camera can focus on objects as close as about 1 cm (0.4 in.)
from the lens.
This feature is useful when taking close-up pictures of flowers and other small subjects.
1Press the multi selector I (p macro mode).
2Press the multi selector H or I to select ON
and press the k button.
•The macro mode icon (F) is displayed.
•If a setting is not applied by pressing the k button within
a few seconds, the selection will be canceled.
3Use the zoom control or the side zoom
control to set the zoom to a position where F
and the zoom indicator glow green.
•How close you can be to the subject when shooting depends on the zoom position.
When the zoom is set to a position where F and the zoom indicator glow green, the
camera can focus on subjects as close as about 10 cm (4 in.) from the lens.
•When the zoom position is in the area indicated by 1, the
camera can focus on objects as close as about 1 cm (0.4 in.)
from the lens.
Macro mode
1
58
Shooting Features
BNotes About Using the Flash
T
he flash may be unable to light the entire subject at distances of less than 50 cm (1 ft 8 in.).
CAutofocus
When shooting still images in macro mode, the camera focuses continuously until the shutter-
release button is pressed halfway to lock the focus. You may hear the sound of the camera focusing.
CThe Macro Mode Setting
•Macro mode cannot be used when using certain shooting modes. ➝ “Default Settings” (A60)
•The macro mode setting applied in A (auto) mode is saved in the camera’s memory even after
the camera is turned off.
59
Shooting Features
Adjusting Brightness (Exposure Compensation)
You can adjust overall image brightness.
1Press the multi selector K (o exposure
compensation).
2Press the multi selector H or I to select a
compensation value.
•To make the image brighter, apply positive (+) exposure
compensation.
•To make the image darker, apply negative (–) exposure
compensation.
3Press the k button to apply the
compensation value.
•If you do not press the k button within a few seconds, the
setting will be applied and the menu will disappear.
•When an exposure compensation value other than 0.0 is
applied, the value is displayed with the H indicator in the
monitor.
4Press the shutter-release button to take a picture.
•To turn off exposure compensation, return to step 1 and change the value to 0.0.
+0.3
Exposure compensation
0.0
0.0
+0.3
+0.3
9 7 0
970
2 9 m 0 s
29m 0s
CExposure Compensation Value
T
he exposure compensation value applied in A (auto) mode is saved in the camera’s memory even
after the camera is turned off.
60
Shooting Features
Default Settings
Default settings for each shooting mode are described below.
Flash1
(A51)
Self-timer
(A55)
Macro
(A57)
Exposure
compensation
(A59)
G (easy auto) (A34) U2Off Off30.0
F (smart portrait) (A44) U4Off5Off60.0
A (auto) (A48) UOff Off 0.0
Scene
b(A36) VOff Off60.0
c(A36) W6Off Off60.0
d(A37) W6Off6Off60.0
e(A37) V7Off Off60.0
f(A37) V8Off Off60.0
Z(A38) UOff Off60.0
z(A38) UOff Off60.0
h(A38) W6Off Off60.0
i(A38) W6Off Off60.0
j(A39) W6Off Off60.0
k(A39) WOff On60.0
u(A39) W6Off On60.0
l(A40) W6Off Off 0.0
m(A40) W6Off6Off60.06
n(A40) WOff Off 0.0
o(A40) X6Off Off60.0
U(A41) WOff Off 0.0
61
Shooting Features
1Setting is used when the flash is raised.
2You can select U (auto) or W (off). When U (auto) is selected, the camera automatically
selects the flash mode appropriate for the scene it has selected.
3The setting cannot be changed. Automatically changes to macro mode when the camera selects
Close-up scene mode.
4Cannot be used when Blink proof is set to On.
5Can be set when Smile timer is set to Off.
6The setting cannot be changed.
7The setting cannot be changed. The flash mode setting is fixed at fill flash with slow sync and red-
eye reduction.
8Slow sync with red-eye reduction flash mode may be used.
9Self-timer cannot be used. Pet portrait auto release (A42) can be set to On or Off.
Flash1
(A51)
Self-timer
(A55)
Macro
(A57)
Exposure
compensation
(A59)
O(A42) W6Y9Off 0.0
s(A43) W6Off6Off 0.0
BFeatures That Cannot Be Used Simultaneously
Some settings cannot be used with other functions (A64).
62
Shooting Features
Changing the Image Size (Image Mode)
You can use the Image mode setting in the shooting menu to select the combination of
image size and compression ratio that is used when saving images.
Select the image mode best suited to the manner in which images will be used and the
capacity of the internal memory or memory card.
Image Mode Settings (Image Size and Quality)
* The total number of pixels captured, and the number of pixels captured horizontally and vertically.
Example: P 4608×3456 = approx. 16 megapixels = 4608×3456 pixels
Enter shooting mode M d button M Shooting menu M Image mode M k button
Image mode* Description
Q 4608×3456PImages will be higher quality than P. The compression ratio is
approximately 1:4.
P 4608×3456 (default setting)
Best choice in most situations. The compression ratio is
approximately 1:8.
R 3264×2448
r 2272×1704
q 1600×1200 Smaller size than P, R, or r and therefore allows more
images to be saved. The compression ratio is approximately 1:8.
O 640×480 Suited to full-screen display on a TV with an aspect ratio of 4:3, or
distribution by e-mail. The compression ratio is approximately 1:8.
g 4608×2592 Images with an aspect ratio of 16:9 are saved. The compression
ratio is approximately 1:8.
CNotes About Image Mode
•The setting is also applied to other shooting modes.
•Some settings cannot be used with other functions (A64).
•Image mode cannot be selected when using the 3D photography scene mode (A43).
63
Shooting Features
CNumber of Images That Can Be Saved
T
he following table lists the approximate number of images that can be saved in the internal
memory and on a 4 GB memory card. Note that due to JPEG compression, the number of images
that can be saved varies greatly depending on the composition of the image. In addition, this
number varies depending on the make of the memory card, even when the memory cards have the
same specified capacity.
1If the number of exposures remaining is 10,000 or more, the number of exposures remaining
display shows “9999”.
2Print size at an output resolution of 300 dpi.
Print sizes are calculated by dividing the number of pixels by printer resolution (dpi) and
multiplying by 2.54 cm (1 in.). However, at the same image size, images printed at higher
resolutions will print smaller than the size indicated, and those printed at lower resolutions will
print larger than the size indicated.
Image mode Internal memory
(approx. 50 MB)
Memory card1
(4 GB) Print size2 (cm/in.)
Q 4608×3456P6 490 39 × 29/15 × 11.5
P 4608×3456 12 970 39 × 29/15 × 11.5
R 3264×2448 24 1910 28 × 21/11 × 8
r 2272×1704 48 3820 19 × 14/7.5 × 5.6
q 1600×1200 95 7240 13 × 10/5.3 × 4
O 640×480 256 27700 5 × 4/2 × 1.5
g 4608×2592 16 1290 39 × 22/15 × 8.5
64
Shooting Features
Features That Cannot Be Used Simultaneously
Some shooting settings cannot be used with other functions.
Restricted
function Option Descriptions
Flash mode
Continuous (A49) When Continuous, BSS, or Multi-shot 16 is selected,
the flash cannot be used.
Blink proof (A46) When Blink proof is set to On, the flash cannot be used.
Self-timer Smile timer (A46) When Smile timer is used for shooting, the self-timer
cannot be used.
Digital zoom Continuous (A49) When Multi-shot 16 is selected, digital zoom cannot
be used.
Image mode Continuous (A49) When Multi-shot 16 is selected, the Image mode
setting is fixed at L (image size: 2560 × 1920 pixels).
White balance Color options
(A49)
When using Black-and-white, Sepia, or Cyanotype,
the White balance setting is fixed at Auto.
Continuous Self-timer (A55) When using the self-timer, Continuous is fixed at
Single.
ISO sensitivity Continuous (A49)
When Multi-shot 16 is selected, the ISO sensitivity
setting is automatically specified according to the
brightness.
Motion detection
Continuous (A49) When Multi-shot 16 is selected, Motion detection is
disabled.
ISO sensitivity
(A49)
When the ISO sensitivity is set to any setting other
than Auto, Motion detection is disabled.
Shutter sound Continuous (A49) When Continuous, BSS, or Multi-shot 16 is selected,
the shutter sound is not heard.
65
Shooting Features
Focusing
Using Face Detection
In the following shooting modes, the camera uses face
detection to automatically focus on human faces.
If the camera detects more than one face, a double border is
displayed around the face that the camera will focus on, and
single borders are displayed around the other faces.
•If no faces are detected when the shutter-release button is pressed halfway, the camera
will focus on the subject in the center of the frame.
Shooting mode Number of faces that
can be detected Focus area (double border)
Portrait (A36) and Night portrait
(A37) in G (easy auto) mode Up to 12 The face closest to the camera
Portrait (A36) and Night portrait
(A37) scene modes
Smart portrait mode (A44) Up to 3 The face closest to the center of
the frame
9 7 0
970
2 9 m 0 s
29m 0s
BNotes About Face Detection
•
The camera’s ability to detect faces depends on a variety of factors, including whether or not the subject
is facing the camera. Additionally, the camera may be unable to detect faces in the following situations:
- When faces are partially hidden by sunglasses or otherwise obstructed
- When faces take up too much or too little of the frame
•When the frame includes more than one face, the faces detected by the camera and the face on
which the camera focuses depend upon a variety of factors, including the direction in which the
faces are looking.
•In some rare cases, such as those described in “Autofocus” (A28), the subject may not be in
focus even though the double border turns green. Should this occur, use another mode, such as
A (auto) mode, and try focus lock shooting (A66) by focusing on another subject that is the
same distance from the camera.
66
Shooting Features
Focus Lock
When the camera focuses on an object in the center of the frame, you can use focus lock to
focus on an off-center subject.
Use the following procedure when taking pictures using A (auto) mode.
1Aim the camera so that the subject is in the center of the frame.
2Press the shutter-release button
halfway.
•Confirm that the focus area glows green.
•Focus and exposure are locked.
3Continue holding down the shutter-release
button halfway and recompose the picture.
•Be sure to maintain the same distance between the
camera and the subject while the shutter-release button is
pressed halfway.
4Press the shutter-release button the rest of
the way down to take the picture.
F 3.1
F 3.1
1/250
1/250
F 3.1
F 3.1
1/250
1/250
67
Playback Features
Playback Features
This chapter describes the features that are available when playing back images.
Playback Zoom .................................................... 68
Thumbnail Display, Calendar Display................ 69
Features Available in Playback Mode (Playback Menu)
... 70
Connecting the Camera to a TV, Computer, or Printer
... 71
Using ViewNX 2.................................................... 73
Installing ViewNX 2.................................................................................... 73
Transferring Images to the Computer ................................................ 76
Viewing Images........................................................................................... 78
4/ 4
15/05/2012 15:30
15/05/2012 15:30
0004. JPG
Playback menu
Rotate image
Small picture
D-Lighting
Skin softening
Print order
Slide show
Protect
68
Playback Features
Playback Features
Playback Zoom
Rotating the zoom control to g (i) in full-frame playback mode (A29) zooms in on the
center of the image displayed in the monitor.
•You can change the zoom ratio by rotating the zoom control to f (h) and g (i). Images
can be zoomed up to approximately 10×.
•To view a different area of the image, press the multi selector H, I, J, or K.
•If you are viewing an image that was captured using face detection (A65) or pet
detection (A42), the camera zooms in on the face detected at the time of shooting. If the
camera detected multiple faces when the image was captured, press H, I, J, or K to
display a different face. To zoom in on an area of the image where there are no faces,
adjust the magnification rate and then press H, I, J, or K.
•You can crop the image and save the displayed area of the image as a separate file by
pressing the d button (E13).
•Press the k button to return to full-frame playback mode.
4 / 4
4/ 4
15/05/2012 15:30
15/05/2012 15:30
0004. JPG
0004. JPG
g (i)
f
(h)
Image is zoomed in.
Image is displayed full-frame.
Displayed area guide
69
Playback Features
Thumbnail Display, Calendar Display
Rotating the zoom control to f (h) in full-frame playback mode (A29) displays images in
“contact sheets” of thumbnail images.
•You can view several images on one screen, making it easy to find the image you want.
•You can change the number of thumbnails displayed by rotating the zoom control to f
(h) and g (i).
•Press the multi selector H, I, J, or K to select an image, and then press the k button to
display that image full-frame.
•When 16 thumbnails are displayed, rotate the zoom control to f (h) to switch to
calendar display.
•While using calendar display mode, press H, I, J, or K to select a date and then press
the k button to display the first image captured on that day.
1 / 2 0
1/ 20
15/05/2012 15:30
15/05/2012 15:30
0001. JPG
0001. JPG
1/ 20
3
Su M Tu W Th F Sa
8
7
6
5432
15
22
14
21
13
20
12
19
11
18
10
17
9
16
292827
26252423
30
1
2012 05
31
Image Thumbnail Display
(4, 9, and 16 images per screen)
Full-frame Display Calendar Display
g (i)
f
(h)
g (i)
f
(h)
BCalendar Display
Images captured when the camera’s date is not set are treated as images captured on January 1,
2012.
70
Playback Features
Features Available in Playback Mode (Playback Menu)
When viewing images in full-frame playback mode or thumbnail playback mode, you can
configure the following functions by pressing the d button (A3) to display the menu.
1Images are edited and saved as separate files. Certain restrictions apply (E8, E9). For example,
images captured at an Image mode (A62) setting of l 4608×2592 cannot be edited, and the
same editing feature cannot be applied multiple times.
2Cannot be applied to images captured in the 3D photography (A43) scene mode.
Option Description A
I D-Lighting1, 2 Allows you to create copies with enhanced brightness and
contrast, brightening dark portions of an image. E10
e Skin softening1, 2 The camera detects faces in images and creates a copy with
softer facial skin tones. E11
a Print order2
When using a printer to print images saved on the memory
card, you can use the Print order function to select which
images are printed, and how many copies of each image are
printed.
E35
b Slide show Allows you to view images saved in the internal memory or on a
memory card in an automatic slide show. E38
d Protect Protects selected images from accidental deletion. E39
f Rotate image2Specifies the orientation in which saved images are displayed
with playback. E41
g Small picture1, 2 Creates a small copy of the current image. This feature is useful
for creating copies for display on Web pages or e-mail
attachments.
E12
h Copy Allows you to copy images between the internal memory and a
memory card. E42
71
Playback Features
Connecting the Camera to a TV, Computer, or Printer
You can enhance your enjoyment of images and movies by connecting the camera to a TV,
computer, or printer.
•Before connecting the camera to an external device, make sure the remaining battery level
is sufficient and turn the camera off. For information about the connection methods and
subsequent operations, refer to the documentation included with the device in addition to
this document.
Insert the plug straight.
USB connector and audio/video output
HDMI mini connector (Type C)
How to open the
connector cover.
72
Playback Features
Viewing images on a TV E17
You can view the camera’s images and movies on a TV.
Connection method: Connect the video and audio plugs of the included
Audio Video Cable EG-CP16 to the TV’s input jacks. Alternatively, connect a
commercially available HDMI cable (Type C) to the TV’s HDMI input jack.
Viewing and organizing images on a computer A73
If you transfer images to a computer, you can perform simple retouching and
manage image data in addition to playing back images and movies.
Connection method: Connect the camera to the computer’s USB input jack
with the included USB Cable.
•Before connecting to a computer, install ViewNX 2 on the computer using
the included ViewNX 2 Installer CD-ROM. For information about using the
ViewNX 2 Installer CD-ROM and transferring images to a computer, see
page 73.
Printing images without using a computer E20
If you connect the camera to a PictBridge-compatible printer, you can print
images without using a computer.
Connection method: Connect the camera directly to the printer’s USB input
jack with the included USB Cable.
73
Playback Features
Using ViewNX 2
ViewNX 2 is an all-in-one software package which enables you to transfer, view, edit and share
images.
Install ViewNX 2 using the ViewNX 2 Installer CD-ROM.
Installing ViewNX 2
•An Internet connection is required.
Compatible Operating Systems
Windows
•Windows 7 Home Basic/Home Premium/Professional/Enterprise/Ultimate (Service Pack 1)
•Windows Vista Home Basic/Home Premium/Business/Enterprise/Ultimate (Service Pack 2)
•Windows XP Home Edition/Professional (Service Pack 3)
Your Imaging Toolbox ViewNX 2™
74
Playback Features
Mac OS
•Mac OS X (version 10.5.8, 10.6.8, 10.7.2)
Refer to the Nikon website for the latest information on operating system compatibility.
1Start the computer and insert the ViewNX 2 Installer CD-ROM into the
CD-ROM drive.
•Mac OS: When the ViewNX 2 window is displayed, double-click the Welcome icon.
2Select a language in the language selection dialog to open the
installation window.
•If the desired language is not available, click Region Selection to choose a different region
and then choose the desired language (the Region Selection button is not available in the
European release).
•Click Next to display the installation window.
3Start the installer.
•We recommend clicking Installation Guide in the installation window to check the
installation help information and system requirements before installing ViewNX 2.
•Click Typical Installation (Recommended) in the installation window.
75
Playback Features
4Download the software.
•When the Software Download screen is displayed, click I agree - Begin download.
•Follow the on-screen instructions to install the software.
5Exit the installer when the installation completion screen is displayed.
•Windows: Click Yes.
•Mac OS: Click OK.
The following software is installed:
•ViewNX 2 (consisting of the three modules below)
- Nikon Transfer 2: For transferring images to the computer
- ViewNX 2: For viewing, editing, and printing transferred images
- Nikon Movie Editor: For basic editing of transferred movies
•Panorama Maker 6 (for creating a single panorama photo using a series of images shot in
panorama assist scene mode)
•QuickTime (Windows only)
6Remove the ViewNX 2 Installer CD-ROM from the CD-ROM drive.
76
Playback Features
Transferring Images to the Computer
1Choose how images will be copied to the computer.
Choose one of the following methods:
•
Direct USB connection
: Turn the camera off and ensure that the memory card is inserted in the
camera. Connect the camera to the computer using the supplied USB Cable. Turn the camera on.
To transfer images that are saved in the camera’s internal memory, remove the memory card
from the camera before connecting it to the computer.
•SD card slot: If your computer is equipped with an SD card slot, the card can be inserted
directly in the slot.
•SD card reader: Connect a card reader (available separately from third-party suppliers) to
the computer and insert the memory card.
If a message is displayed prompting you to choose a program, select Nikon Transfer 2.
•When using Windows 7
If the dialog shown at right is displayed, follow
the steps below to select Nikon Transfer 2.
1Under Import pictures and videos, click
Change program. A program selection
dialog will be displayed; select Import File
using Nikon Transfer 2 and click OK.
2Double-click Import File.
If the memory card contains a large number of images, it may take a while for Nikon Transfer 2
to start. Wait until Nikon Transfer 2 starts.
BConnecting the USB Cable
T
he connection may not be recognized if the camera is connected to the computer via a USB hub.
77
Playback Features
2Transfer images to the computer.
•Confirm that the name of the connected camera or removable disk is displayed as the
“Source” on the “Options” title bar of Nikon Transfer 2 (1).
•Click Start Transfer (2).
•At default settings, all the images on the memory card will be copied to the computer.
3Terminate the connection.
•If the camera is connected to the computer, turn the camera off and disconnect the USB
cable. If you are using a card reader or card slot, choose the appropriate option in the
computer operating system to eject the removable disk corresponding to the memory card
and then remove the card from the card reader or card slot.
1
2
78
Playback Features
Viewing Images
Start ViewNX 2.
•Images are displayed in ViewNX 2 when transfer is
complete.
•Consult online help for more information on using
ViewNX 2.
CStarting ViewNX 2 Manually
•Windows: Double-click the ViewNX 2 shortcut icon on the desktop.
•Mac OS: Click the ViewNX 2 icon in the Dock.
79
Recording and Playing Back Movies
Recording and Playing Back
Movies
You can record movies by simply pressing the b (e movie-record) button.
Recording Movies................................................ 80
Changing Movie Recording Settings (the Movie Menu).............. 83
Playing Back Movies............................................ 84
9 7 0
970
2 9m 0s
29m 0s
1 4 m 3 0 s
14m30s
80
Recording and Playing Back Movies
Recording and Playing Back Movies
Recording Movies
You can record movies by simply pressing the b (e movie-record) button.
1Display the shooting screen.
•The icon for the selected movie option is displayed. The
default setting is n HD 720p (1280×720) (A83).
2Lower the flash (A5)
•Recording movies while the flash is raised may cause the audio to be muffled.
3Press the b (e movie-record) button to start
movie recording.
•The camera focuses on the subject in the center of the
frame. Focus areas are not displayed during recording.
•When Movie options is set to n HD 720p (1280×720),
the monitor display changes to a 16:9 aspect ratio when
recording movies.
•If Photo info in the Monitor settings (A88) in the setup
menu is set to Movie frame+auto info, the area that will
be visible in the movie can be confirmed before movie
recording starts.
•C is displayed while saving to the internal memory.
9 7 0
970
2 9 m 0 s
29m 0s
Movie option
Maximum movie length
1 4 m 3 0 s
14m30s
81
Recording and Playing Back Movies
4Press the b (e movie-record) button again to end recording.
BNotes About Saving Data
After taking pictures or recording a movie, the number of exposures remaining or the remaining
recording time flashes while images or movies are being saved. Do not open the battery-
chamber/memory card slot cover while images or movies are being saved. Image and movie data
could be lost and the camera or memory card could be damaged.
BNotes About Movie Recording
•Memory cards with an SD Speed Class rating of 6 or faster are recommended when recording
movies (A15). Movie recording may stop unexpectedly when memory cards with a lower Speed
Class rating are used.
•There may be some degradation in image quality when digital zoom is used. If the digital zoom is
not being used when movie recording begins, turning and holding the zoom control or the side
zoom control toward g magnifies the image using optical zoom and the zoom stops at the
maximum optical zoom ratio. After letting go of the zoom control, turn the zoom control toward
g again to magnify the image using the digital zoom.
•When recording ends, digital zoom turns off.
•The sounds of zoom control operation, zoom, autofocus lens drive movement, vibration
reduction, and aperture operation when brightness changes may be recorded.
•Smear (F3) visible in the monitor with movie recording will be recorded with movies. Avoiding
bright objects such as the sun, reflections of the sun, and electric lights is recommended.
•Depending on the distance to the subject or the amount of zoom applied, subjects with repeating
patterns (fabrics, lattice windows, etc.) may have colored stripes (interference patterns, moire, etc.)
in them during movie recording and playback. This occurs when the pattern in the subject and the
layout of the image sensor interfere with each other; it is not a malfunction.
•The camera may become warm when shooting movies for an extended period of time or when
the camera is used in a hot area.
BNotes About Autofocus
Autofocus may not perform as expected (A28). Should this occur, try the following:
1. Set Autofocus mode in the movie menu to A Single AF (default setting) before starting
movie recording (A83, E45).
2. Frame another subject—positioned at the same distance from the camera as the intended
subject—in the center of the frame, press the b (e movie-record) button to start recording, and
then modify the composition.
82
Recording and Playing Back Movies
CMovie Options and Maximum Movie Length
All figures are approximate. The maximum movie length may vary depending on the make of the
memory card, even among memory cards of the same capacity.
* The maximum size for a single movie is 4 GB, and the maximum movie length for a single movie is
29 minutes, even when there is sufficient free space on the memory card. When recording a
movie, the remaining recording time that is displayed is the amount of recording time available for
one movie.
CFunctions Available with Movie Recording
•The exposure compensation, white balance, and color options settings for the current shooting
mode are also applied with movie recording. The tone that results from using scene mode (A35)
is also applied to movies. When macro mode is enabled, movies of subjects closer to the camera
can be recorded. Confirm settings before starting movie recording.
•The self-timer (A55) can be used. Set the self-timer and press the b (e movie-record) button
to start recording a movie after ten seconds.
•The flash will not fire.
•Press the d button to select the D (movie) tab and adjust movie menu settings before starting
movie recording (A83).
Movie options (A83) Internal memory
(approx. 50 MB) Memory card (4 GB)*
n HD 720p (1280×720)
(default setting) 31 s 45 min
m VGA (640×480) 1 min 17 s 1 h 50 min
83
Recording and Playing Back Movies
Changing Movie Recording Settings (the Movie Menu)
The following settings can be changed.
Enter shooting mode M d button M D tab M k button
Option Description A
Movie options The following movie types are available: n HD 720p
(1280×720) and m VGA (640×480).E44
Autofocus mode
When A Single AF (default setting) is selected, focus is
locked when movie recording begins. When B Full-time
AF is selected, the camera focuses continuously while
recording.
When B Full-time AF is selected, the sound of the camera
focusing may be heard in recorded movies. If you want to
prevent the sound of the camera focusing from being recorded,
select A Single AF.
E45
Wind noise reduction Set whether or not to reduce wind noise during movie
recording. E45
Movie options
Autofocus mode
Movie
Wind noise reduction
84
Recording and Playing Back Movies
Playing Back Movies
Press the c button to enter playback mode.
Movies are indicated by the movie options
icon (A83).
Press the k button to play back movies.
Deleting Movies
To delete a movie, select the desired movie in full-frame playback mode (A29) or thumbnail
playback mode (A69) and press the l button (A31).
1 0 s
10s
15/05/2012 15:30
15/05/2012 15:30
0010. MOV
0010. MOV
Movie options
85
Recording and Playing Back Movies
Functions Available During Playback
Playback controls are displayed at the top of the monitor.
Press the multi selector J or K to select a control. The
operations described below are available.
Adjusting Volume
Rotate the zoom control to g or f (A2) during playback.
Function Icon Description
Rewind AHold down the k button to rewind the movie.
Advance BHold down the k button to advance the movie.
Pause E
Press the k button to pause playback. The following operations can be
performed while playback is paused using the controls displayed at the top
in the monitor.
CPress the k button to rewind the movie. Hold down the k button
for continuous rewinding.
DPress the k button to advance the movie. Hold down the k
button for continuous advancing.
FPress the k button to resume playback.
IPress the k button to cut unwanted portions of a movie so that
only the desired portions of a movie are saved (E15).
End GPress the k button to return to full-frame playback mode.
Paused
4 s
4s
Volume indicator
BNotes About Playing Back Movies
T
he COOLPIX L810 is not able to play back movies recorded with another make or model of digital
camera.
86
87
General Camera Setup
General Camera Setup
This chapter describes the various settings that can be adjusted in the z setup menu.
For further details about each setting, refer to “The Setup Menu” in the Reference Section
(E46).
Set up
Welcome screen
Time zone and date
Monitor settings
Print date
Motion detection
AF assist
Vibration reduction
9 7 0
970
2 9m 0s
29m 0s
88
General Camera Setup
General Camera Setup
The Setup Menu
The following settings can be changed in the setup menu by
selecting the z tab.
Press the d button M z (setup) tab M k button
Option Description A
Welcome screen Allows you to select whether or not a welcome screen is
displayed when the camera is turned on. E46
Time zone and date Allows you to set the camera clock and select the home and
destination time zones. E47
Monitor settings Allows you to adjust photo information display and monitor
brightness settings. E51
Print date Allows you to imprint the shooting date and time on images. E53
Vibration reduction Reduce the effects of camera shake while shooting. E54
Motion detection
Allows you to set whether or not the camera automatically increases
the shutter speed to reduce blurring caused by camera shake when
motion is detected when shooting still images.
E55
AF assist Allows you to enable and disable the AF-assist illuminator. E56
Sound settings Allows you to adjust sound settings. E57
Auto off Allows you to set the amount of time that passes before the
monitor turns off to save power. E58
Set up
Welcome screen
Time zone and date
Monitor settings
Print date
Motion detection
AF assist
Vibration reduction
89
General Camera Setup
Format memory/
Format card Allows you to format the internal memory or the memory card. E59
Language Allows you to change the camera’s display language. E60
TV settings Allows you to adjust TV-connection settings. E61
Blink warning Allows you to set whether or not closed eyes are detected when
taking pictures of people using face detection. E62
Eye-Fi upload
Allows you to set whether or not the camera’s Eye-Fi card
(available from third-party manufacturers) sends images to your
computer.
E64
Reset all Allows you to reset the camera’s settings to their default values. E65
Battery type Change this setting to match the type of batteries that are
inserted in the camera. E68
Firmware version Allows you to confirm the camera’s firmware version. E68
Option Description A
90
F1
Technical Notes and Index
Technical Notes and Index
Caring for the Product...............................................F2
The Camera.............................................................................................................F2
Batteries ...................................................................................................................F4
Memory Cards .......................................................................................................F6
Cleaning and Storage................................................F7
Cleaning...................................................................................................................F7
Storage.....................................................................................................................F7
Troubleshooting........................................................F8
Specifications...........................................................F16
Supported Standards....................................................................................... F20
Index .........................................................................F21
F2
Technical Notes and Index
Technical Notes and Index
Caring for the Product
The Camera
To ensure safe and continued enjoyment of your Nikon camera, observe the following
precautions and the precautions noted in “For Your Safety” (Aviii-xv) when using or storing
your camera.
BDo Not Subject the Product to Strong Shocks
The product may malfunction if dropped or struck. Additionally, do not touch or apply force to the
lens.
BKeep Dry
If water enters the camera, internal components may rust or otherwise become damaged, and
repairing the camera may be expensive or even impossible.
BAvoid Sudden Changes in Temperature
Sudden changes in temperature, such as when entering or leaving a heated building on a cold day,
can cause condensation to form inside the device. To prevent condensation, place the device in a
carrying case or a plastic bag before exposing it to sudden changes in temperature.
BKeep away from Strong Magnetic Fields
Do not use or store this device in the vicinity of equipment that generates strong electromagnetic
radiation or magnetic fields. Strong static charge or the magnetic fields produced by equipment
such as radio transmitters could interfere with the monitor, damage data saved on the memory card,
or affect the product’s internal circuitry.
BDo Not Point the Lens at Strong Light Sources for Extended Periods
Avoid pointing the lens at the sun or other strong light sources for extended periods when using or
storing the camera. Intense light may damage the image sensor or other components, producing a
white blur effect in photographs.
F3
Technical Notes and Index
BTurn the Camera off Before Removing the Batteries, AC Adapter, or Memory Card
Removing the batteries, AC adapter, or memory card while the camera is on could damage the
camera or memory card. If removed while the camera is saving or deleting data, data may be lost
and the camera's memory or the memory card may be damaged.
BNotes on the Monitor
•Monitors and electronic viewfinders are constructed with extremely high precision; at least 99.99%
of pixels are effective, with no more than 0.01% being missing or defective. Hence while these
displays may contain pixels that are always lit (white, red, blue, or green) or always off (black), this is
not a malfunction and has no effect on images recorded with the device.
•Scraping or pressing on the surface of the monitor may result in damage or malfunction. Should
the monitor break, care should be taken to avoid injury caused by broken glass and to prevent the
liquid crystal from the display touching the skin or entering the eyes or mouth.
•Images in the monitor may be difficult to see under bright lighting.
•The monitor is lit by an LED backlight. Should the monitor begin to dim or flicker, contact your
Nikon-authorized service representative.
BNotes About Smear
White or colored streaks may be visible when bright subjects are framed in the monitor. This
phenomenon, known as “smear,” occurs when extremely bright light strikes the image sensor; it is
characteristic of image sensors and does not indicate a malfunction. Smear may also take the form of
partial discoloration in the monitor during shooting. It does not appear in images saved with the
camera except in the cases of movies and of images saved with Multi-shot 16 selected for
Continuous. When shooting in these modes, we recommend that you avoid bright subjects such
as the sun, reflected sunlight, and electric lights.
F4
Technical Notes and Index
Batteries
Be sure to read and follow the warnings noted in “For Your Safety” (Aviii-xv) before use.
BNotes About Using Batteries
•Used batteries may overheat. Handle with caution.
•Do not use batteries beyond their recommended expiration date.
•Do not turn the camera on and off repeatedly if discharged batteries are inserted in the camera.
BSpare Batteries
We recommend carrying spare batteries depending on where you are shooting. It may be difficult to
purchase batteries in certain areas.
BCharging Batteries
If using optional rechargeable batteries, charge the batteries before taking pictures. Batteries are not
charged at the time of purchase.
Be sure to read and follow the warnings noted in the operating instructions included with the
battery charger.
BCharging Rechargeable Batteries
•Do not mix batteries with different amounts of charge remaining, or batteries of a different make
or model.
•When using EN-MH2 batteries with the COOLPIX L810, charge the batteries four at a time using
Battery Charger MH-73. Use only Battery Charger MH-73 to charge EN-MH2 batteries.
•When using Battery Charger MH-73, only charge EN-MH2 batteries.
•EN-MH1 rechargeable Ni-MH batteries cannot be used.
F5
Technical Notes and Index
BNotes About Rechargeable Ni-MH Batteries
•If you repeatedly charge rechargeable Ni-MH batteries while they still have some charge
remaining, the message Battery exhausted. may be displayed prematurely when using the
batteries. This is due to the “memory effect,” in which the amount of charge the batteries can hold
decreases temporarily. Use the batteries until there is no charge remaining and they will return to
their normal behavior.
•Rechargeable Ni-MH batteries discharge even when not being used. We recommend charging the
batteries just before using them.
BCold Environment Usage
Battery performance decreases in cold environments. When using the camera in cold environments,
try not to let the camera and batteries become too cold. The camera may not function if you use
discharged batteries in cold environments. Keep spare batteries warm and alternate between two
sets of batteries. Batteries that cannot be used because they have become too cold can often be
used again when they have been warmed up.
BBattery Terminals
Dirt on the battery terminals can prevent the camera from functioning. Remove dirt from the
terminals using a dry cloth.
BRemaining Battery Charge
If you insert discharged batteries into the camera, the camera may indicate that the batteries have
adequate charge remaining. This is a characteristic of batteries.
BRecycling
Used batteries are a valuable resource. Please recycle used batteries in accordance with local
regulations. Cover the battery terminals with tape when recycling.
F6
Technical Notes and Index
Memory Cards
•Use only Secure Digital memory cards. Approved memory cards ➝ A15
•Observe the precautions noted in the documentation included with your memory card.
•Do not affix labels or stickers to the memory card.
•Do not format the memory card using a computer.
•Before using a memory card with this camera, format the card using this camera if the card has
been used with another device. Before using a new memory card, we recommend using this
camera to format the card.
•Note that formatting a memory card permanently deletes all images and other data on the
memory card. If there is data saved on the memory card that you wish to keep, copy that data to
a computer before formatting.
•If the message Card is not formatted. Format card? is displayed when you insert a memory
card, the memory card must be formatted. If there is data on the memory card that you do not
want to delete, select No. Copy that data to a computer before formatting. To format the memory
card, select Yes and press the k button.
•Observe the following precautions while formatting the memory card, saving and deleting
images, and copying images to a computer, otherwise data or the memory card itself may be
damaged.
- Do not open the battery-chamber/memory card slot cover or remove the memory card or
batteries.
- Do not turn off the camera
- Do not disconnect the AC adapter
F7
Technical Notes and Index
Cleaning and Storage
Cleaning
Do not use alcohol, thinner, or other volatile chemicals.
Storage
Remove the batteries if the camera will not be used for an extended period. To prevent mold
or malfunction and to ensure long, trouble-free use of the camera, we recommend you insert
the batteries and operate the camera approximately once a month. Do not store the camera
with naphtha or camphor moth balls, or in any of the following locations:
•Next to equipment that produces strong electromagnetic fields, such as televisions or
radios
•Places that are exposed to temperatures below –10 °C (14 °F) or above 50 °C (122 °F)
•Places that are poorly ventilated or subject to humidity of over 60%
Lens
When cleaning the lens, avoid touching it directly with your fingers. Remove dust or
lint with a blower. To remove fingerprints, oil, or other grime that cannot be removed
with a blower, wipe the lens with a soft, dry cloth or an eyeglass cleaning cloth, using
a gentle spiral motion that starts in the center and moves toward the edges. Do not
wipe forcefully or wipe with a rough cloth, otherwise the camera may be damaged
or malfunction. If you still cannot remove the grime, wet a soft cloth with a
commercial liquid lens cleaner and gently wipe off the grime.
Monitor
Remove dust or lint with a blower. To remove fingerprints, oil, or other grime, wipe
the area with a soft, dry cloth or an eyeglass cleaning cloth. Do not wipe forcefully or
wipe with a rough cloth, otherwise the camera may be damaged or malfunction.
Body
•Remove dust or lint with a blower. Wipe with a soft, dry cloth.
•After using the camera at the beach or other sandy or dusty environment, wipe off
any sand, dust, or salt with a dry cloth lightly dampened with fresh water and dry
thoroughly.
Note that foreign matter inside the camera could cause damage not covered by the
warranty.
F8
Technical Notes and Index
Troubleshooting
If the camera fails to function as expected, check the list of common problems below before
consulting your retailer or Nikon-authorized service representative.
Power, Display, Settings Issues
Problem Cause/Solution A
Camera turns off without
warning.
•Battery is exhausted.
•Camera has turned off automatically to save power.
•The camera or battery have become too cold and
cannot operate properly.
21
88, E58
F4
Monitor is blank.
•Camera is off.
•Battery is exhausted.
•Standby mode for saving power: press the power
switch, the shutter-release button, A button, c
button, or b (e movie-record) button.
•The flash lamp flashes while the flash is charging.
Wait for the flash to charge.
•Camera and computer are connected via USB
cable.
•Camera and TV are connected via audio/video
cable or HDMI cable.
22
21
2, 22
52
71, 76
71, E17
Monitor is hard to read. •Adjust monitor brightness.
•Monitor is dirty. Clean monitor.
88, E51
F7
F9
Technical Notes and Index
Date and time of recording
are not correct.
•If camera clock has not been set, “Date not set”
indicator flashes during shooting and movie
recording. Images and movies saved before clock is
set are dated “00/00/0000 00:00” or “01/01/2012
00:00” respectively. Set the correct time and date
from the Time zone and date option in the setup
menu.
•Check camera clock regularly against more
accurate timepieces and reset as required.
16, 88,
E47
No indicators displayed in
monitor.
Hide info is selected for Photo info.
Select Show info.88, E51
Print date not available. Time zone and date has not been set. 16, 88,
E47
Date not imprinted on
images even when Print
date is enabled.
•The current shooting mode is one that does not
support Print date.
•The date cannot be imprinted on movies.
88, E53
Screen for setting time zone
and date is displayed when
camera is turned on. Clock battery is exhausted; all settings were restored
to their default values. 16, 19
Camera settings reset.
Camera becomes hot.
The camera may become hot when shooting movies
or uploading images from an Eye-Fi card for an
extended period of time, or when the camera is used
in a hot area; this is not a malfunction.
–
Problem Cause/Solution A
F10
Technical Notes and Index
Characteristics of Digital Cameras
In extremely rare instances, unusual characters may appear in the monitor and the camera
may stop functioning. In most cases, this phenomenon is caused by a strong external static
charge. Turn the camera off, remove and replace the batteries, then turn the camera on again.
In the event of continued malfunction, contact your retailer or Nikon-authorized service
representative. Note that disconnecting the power source as described above may result in
the loss of any data not saved to internal memory or the memory card at the time the
problem occurred. Data already saved will not be affected.
Shooting Issues
Problem Cause/Solution A
Cannot switch to shooting
mode. Disconnect the HDMI cable or USB cable.
71, 76,
E17,
E20
No image captured when
the shutter-release button is
pressed.
•When camera is in playback mode, press the A
button, the shutter-release button, or the b (e
movie-record) button.
•When menus are displayed, press the d button.
•Battery is exhausted.
•When flash lamp flashes, flash is charging.
29
3
21
52
Cannot capture 3D image.
In some shooting conditions, such as when the
subject is dark or low in contrast, the second image
may not be captured or the 3D image may not be
saved.
E7
F11
Technical Notes and Index
Camera cannot focus.
•Subject is too close. Try shooting using easy auto
mode, Close-up scene mode, or macro mode.
•The intended subject is one with which autofocus
does not perform well.
•Set AF assist in the setup menu to Auto.
•Turn camera off and then on again.
34, 39, 57
28
88, E56
22
Images are blurred.
•Use flash.
•Increase the ISO sensitivity value.
•Enable vibration reduction or motion detection.
•Use D (best shot selector).
•Use tripod and self-timer.
51
49, E33
88, E54,
E55
40, 49,
E32
55
Streaks of light or partial
discoloration are visible in
the monitor.
Smear occurs when extremely bright light strikes the
image sensor. When shooting with Continuous set
to Multi-shot 16 and when recording movies,
avoiding bright objects, such as the sun, reflections of
the sun, and electric lights is recommended.
49, E32,
F3
Bright specks appear in
images captured with flash.
Flash is reflecting off particles in air. Lower the flash or
set the flash mode setting to W (off). 5, 53
Flash does not fire.
•The flash is lowered or the flash mode is set to W
(off).
•Scene mode with which the flash does not fire is
selected.
•On is selected for Blink proof in smart portrait
menu.
•Another function that restricts flash is enabled.
5, 51
60
46, E28
64
Problem Cause/Solution A
F12
Technical Notes and Index
Digital zoom cannot be
used.
•Digital zoom cannot be used in the following
situations.
- When Portrait, Night portrait, Pet portrait, or
3D photography is selected for scene mode
- When smart portrait mode is selected
- When Continuous in the shooting menu is set
to Multi-shot 16
36, 37, 42,
43
44
49, E32
Image mode not available. Another function that restricts the Image mode
option is enabled. 64
No sound when shutter is
released.
•Off is selected for Sound settings > Shutter
sound in setup menu. No sound is heard with
some shooting modes and settings, even when On
is selected.
•Do not block the speaker.
88, E57
2
AF-assist illuminator does
not light.
Off is selected for the AF assist option in the setup
menu. AF-assist illuminator may not light depending
on the current scene mode, even when Auto is
selected.
88, E56
Images appear smeared. Lens is dirty. Clean lens. F7
Colors are unnatural. White balance or hue is not adjusted properly. 39, 49,
E29
Randomly spaced bright
pixels (“noise”) appear in
image.
The subject is dark, so shutter speed is too slow or ISO
sensitivity is too high. Noise can be reduced by:
•Using flash.
•Specifying a lower ISO sensitivity setting.
51
49, E33
Problem Cause/Solution A
F13
Technical Notes and Index
Images are too dark
(underexposed).
•
The flash is lowered or the flash mode is set to
W
(off).
•Flash window is blocked.
•Subject is beyond flash range.
•Adjust exposure compensation.
•Increase ISO sensitivity.
•
Subject is backlit. Select
Backlighting
scene mode, or
raise the flash and set the flash mode to
X
(fill flash).
51
23
51
59
49, E33
40, 51
Images are too bright
(overexposed). Adjust exposure compensation. 59
Unexpected results when
flash set to V (auto with
red-eye reduction).
When taking pictures with
V
(auto with red-eye
reduction), or when taking pictures with
Night portrait
(either in easy auto mode or the
Night portrait
scene
mode) and the fill flash with slow sync and red-eye
reduction is used, red-eye reduction may be applied, in rare
cases, to areas not affected by red-eye. Use auto mode or
any scene mode other than
Night portrait
, and change
the flash mode to any setting other than
V
(auto with
red-eye reduction) and try taking a picture again.
37, 51
Skin tones are not softened.
•In some shooting conditions, facial skin tones may
not be smoothed.
•Use Skin softening in the playback menu for
images containing four or more faces.
45
70, E11
Saving images takes time.
It may take more time to save images in the following
situations.
•When the noise reduction function is in operation,
such as when shooting in a dark environment
•When the flash mode is set to V (auto with red-
eye reduction)
•
When the skin softening function is applied while shooting
–
54
36, 37, 46
A ring-shaped belt or
rainbow-colored stripe
appears in the monitor or
images.
When shooting with backlighting or when a very
strong light source (such as sunlight) is in the frame, a
ring-shaped belt or rainbow-colored stripe (ghosting)
may occur. Change the position of the light source, or
frame the picture so that the light source does not
enter the frame and try again.
–
Problem Cause/Solution A
F14
Technical Notes and Index
Playback Issues
Problem Cause/Solution A
File cannot be played back.
•File or folder was overwritten or renamed by
computer or other make of camera.
•
The COOLPIX L810 is not able to play back movies
recorded with another make or model of digital camera.
–
85
Cannot zoom in on image.
•Playback zoom cannot be used with movies, small
pictures, or images that have been cropped to a
size of 320 × 240 or smaller.
•
This camera may not be able to zoom in on images
captured with another make or model of digital camera.
•3D images cannot be enlarged when the camera is
connected via HDMI and they are played back in 3D.
–
–
43
Cannot use D-Lighting, skin
softening, small picture, or
crop.
•These options cannot be used with movies.
•Images captured at an Image mode setting of g
4608×2592 and images captured using 3D
photography cannot be edited, and the same
editing feature cannot be applied multiple times.
•Camera is unable to edit images captured with
other cameras.
–
70, E8,
E9
70, E8,
E9
Cannot rotate image.
The camera cannot rotate images captured with
another make or model of digital camera, or images
captured with 3D photography.
43
Cannot edit movie.
•Edited movies cannot be edited again.
•Movies cannot be trimmed so that they are less
than 2 seconds long.
•
Editing functions are not available when there is not
enough free space in the internal memory or on the
memory card, or when the battery level indicator is
B
.
E16
F15
Technical Notes and Index
Images are not displayed on
TV.
•Video mode or HDMI is not correctly set in the TV
settings setup menu.
•Cables are connected to the HDMI mini connector
(Type C) and to the USB connector and audio/video
output simultaneously.
•Memory card contains no images. Replace the
memory card. Remove the memory card to play
back images from the internal memory.
89, E61
71, 76,
E17,
E20
13
Nikon Transfer 2 does not
start when camera is
connected.
•Camera is off.
•Battery is exhausted.
•USB cable is not correctly connected.
•Camera is not recognized by the computer.
•Confirm system requirements.
•Computer is not set to start Nikon Transfer 2
automatically. For more information about Nikon
Transfer 2, refer to help information contained in
ViewNX 2.
22
21
71, 76
–
73
76
Images to be printed are not
displayed.
•Memory card contains no images. Replace the
memory card.
•Remove the memory card to print images from the
internal memory.
•Images captured in 3D photography scene mode
cannot be printed.
13
13
43
Cannot select paper size
with camera.
Paper size cannot be selected from the camera in the
following situations, even when printing from a
PictBridge-compatible printer. Use the printer to
select paper size.
•The printer does not support the paper sizes
specified by the camera.
•The printer automatically selects the paper size.
71, E23,
E24
–
Problem Cause/Solution A
F16
Technical Notes and Index
Specifications
Nikon COOLPIX L810 Digital Camera
Type Compact digital camera
Effective pixels 16.1 million
Image sensor 1/2.3-in. type CCD; approx. 16.44 million total pixels
Lens 26× optical zoom, NIKKOR lens
Focal length 4.0-104.0mm (angle of view equivalent to that of 22.5-585 mm lens
in 35mm [135] format)
f/-number f/3.1-5.9
Construction 12 elements in 9 groups (1 ED lens element)
Digital zoom Up to 4× (angle of view equivalent to that of approx. 2340 mm lens
in 35mm [135] format)
Vibration reduction Lens shift
Autofocus (AF) Contrast-detect AF
Focus range
(from lens)
•[W]: Approx. 50 cm (1 ft 8 in.) to ∞,
[T]: Approx. 1.5 m (5 ft) to ∞
•Macro mode: Approx. 1 cm (0.4 in.) (when zoom is set to middle
position) to ∞
Focus-area selection Center, face detection
Monitor 7.5-cm (3-in.), approx. 921k-dot, wide viewing angle TFT LCD with
anti-reflection coating and 5-level brightness adjustment
Frame coverage
(shooting mode)
Approx. 98% horizontal and 98% vertical (compared to actual
picture)
Frame coverage
(playback mode)
Approx. 100% horizontal and 100% vertical (compared to actual
picture)
F17
Technical Notes and Index
Storage
Media Internal memory (approx. 50 MB), SD/SDHC/SDXC memory card
File system DCF, Exif 2.3, DPOF, and MPF compliant
File formats
Still pictures: JPEG
3D images: MPO
Movies: MOV (Video: H.264/MPEG-4 AVC, Audio: LPCM stereo)
Image size
(pixels)
•16M (High) [4608 × 3456P]
•16M [4608 × 3456]
•8M [3264 × 2448]
•4M [2272 × 1704]
•2M [1600 × 1200]
•VGA [640 × 480]
•16:9 [4608 × 2592]
ISO sensitivity
(Standard output
sensitivity)
•ISO 80, 100, 200, 400, 800, 1600
•Auto (auto gain from ISO 80 to 1600)
Exposure
Metering 256-segment matrix, center-weighted (digital zoom less than 2×),
spot (digital zoom 2× or more)
Exposure control Programmed auto exposure with motion detection and exposure
compensation (–2.0 to +2.0 EV in steps of 1/3 EV)
Shutter Mechanical and charge-coupled electronic shutter
Speed •1/1500 to 1 s
•4 s (Fireworks show scene mode)
Aperture Electronically-controlled ND filter (–3.3 AV) selection
Range 2 steps (f/3.1 and f/9.9 [W])
Self-timer Approx. 10 s
F18
Technical Notes and Index
Built-in flash
Range
(ISO sensitivity: Auto)
[W]: Approx. 0.5 to 5.0 m (1 ft 8 in. to 16 ft)
[T]: Approx. 1.5 to 2.5 m (5 ft to 8 ft 2 in.)
Flash control TTL auto flash with monitor preflashes
Interface Hi-Speed USB
Data transfer protocol MTP, PTP
Video output Can be selected from NTSC and PAL
HDMI output Can be selected from Auto, 480p, 720p, and 1080i
I/O terminal Audio/video (A/V) output; digital I/O (USB)
HDMI mini connector (Type C) (HDMI output), DC input connector
Supported languages
Arabic, Chinese (Simplified and Traditional), Czech, Danish, Dutch,
English, Finnish, French, German, Greek, Hindi, Hungarian,
Indonesian, Italian, Japanese, Korean, Norwegian, Polish,
Portuguese (European and Brazilian), Romanian, Russian, Spanish,
Swedish, Thai, Turkish, Ukrainian, Vietnamese
Power sources
•Four LR6/L40 (AA-size) alkaline batteries
•Four FR6/L91 (AA-size) lithium batteries
•Four
EN-MH2 rechargeable Ni-MH batteries (available separately)
•AC Adapter EH-67 (available separately)
Battery life
Still pictures*:
•Approx. 300 shots when using alkaline batteries
•Approx. 740 shots when using lithium batteries
•Approx. 450 shots when using EN-MH2 batteries
Movies:
•Approx. 1 h 50 min when using alkaline batteries (HD 720p)
•Approx. 5 h 15 min when using lithium batteries (HD 720p)
•Approx. 3 h 10 min when using EN-MH2 batteries (HD 720p)
Tripod socket 1/4 (ISO 1222)
Dimensions (W × H × D) Approx. 111.1 × 76.3 × 83.1 mm (4.4 × 3.1 × 3.3 in.) (excluding
projections)
Weight Approx. 430 g (15.2 oz) (including batteries and a memory card)
F19
Technical Notes and Index
•Unless otherwise stated, all figures are for a camera with fully-charged LR6/L40 (AA-size)
alkaline batteries operated at an ambient temperature of 25 °C (77 °F).
* Based on Camera and Imaging Products Association (CIPA) standards for measuring the life of
camera batteries. Measured at 23 (±2)°C (73 (±4)°F); zoom adjusted with each shot, flash fired with
every other shot, image mode set to P 4608×3456. Battery life may vary depending on shooting
interval and length of time menus and images are displayed. Data for lithium batteries apply
when using four commercially available FR6/L91 (AA-size) Energizer(R) Ultimate Lithium batteries.
The included batteries are for trial use only.
Operating environment
Temperature 0°C to 40°C (32°F to 104°F)
Humidity Less than 85% (no condensation)
BSpecifications
•Nikon will not be held liable for any errors this manual may contain.
•The appearance of this product and its specifications are subject to change without notice.
F20
Technical Notes and Index
Supported Standards
•DCF: Design Rule for Camera File System is a standard widely used in the digital camera
industry to ensure compatibility among different makes of camera.
•DPOF: Digital Print Order Format is an industry-wide standard that allows images to be
printed from print orders saved on memory cards.
•Exif version 2.3: Exchangeable image file format (Exif) version 2.3 for digital still cameras is
a standard that allows information saved with photographs to be used for optimal color
reproduction when images are output from Exif-compliant printers.
•PictBridge: A standard developed cooperatively by the digital camera and printer
industries, allowing photographs to be output directly to a printer without connecting the
camera to a computer.
F21
Technical Notes and Index
Index
Refer to the Reference Manual CD for pages indicated with E.
Symbols
R.......................................................... E3
g (Tele).................................................................... 24
f (Wide) ............................................................... 24
i Playback zoom .............................................. 68
h Image thumbnail display .................... 69
G Easy auto mode.......................................... 34
b Scene mode.................................................. 35
F Smart portrait mode .............................. 44
A Auto mode................................................... 48
c Playback mode........................................... 29
z Setup menu .................................................... 88
k Apply selection button ............................. 3
A Shooting mode button ............................ 3
be Movie-record button........................... 3
c Playback button .................................. 3, 29
l Delete button........................................... 3, 31
d button .............. 3, 46, 49, 70, 83, 88
m (flash pop-up) button.......................... 5, 51
m Flash mode ...................................................... 51
n Self-timer......................................................... 55
p Macro mode ................................................. 57
o Exposure compensation ....................... 59
j Help.................................................................... 35
Numerics
3D images............................. 43, E5, E69
3D photography s......................... 43, E5
A
AC adapter ........................................... 12, E70
AF assist................................................. 88, E56
AF-assist illuminator ........................................... 2
Alkaline batteries................................................ 11
Aperture value .................................................... 27
Audio/video cable
... 71, 72, E17, E70
Audio/video-in jack ........................ 72, E17
Auto flash............................................................... 53
Auto mode........................................................... 48
Auto off......................................... 22, 88, E58
Autofocus...................................................... 28, 58
Autofocus mode.............................. 83, E45
B
Backlighting o.................................................. 40
Battery .............................................................. 10, 19
Battery chamber ................................................... 3
Battery charger .......................................... E70
Battery level .......................................................... 21
Battery type......................................... 89, E68
Battery-chamber/memory card slot cover
.............................................................................. 3, 13
F22
Technical Notes and Index
Beach Z................................................................. 38
Best shot selector............................ 40, E32
Black and white copy n.............................. 40
Black-and-white .............................. 49, E34
Blink proof........................................... 46, E28
Blink warning ..................................... 89, E62
Brightness ...................................................... E51
BSS............................................................ 40, E32
Built-in microphone ........................................... 2
Button sound.............................................. E57
C
Calendar display ................................................ 69
Close-up k.......................................................... 39
Color options.................................... 49, E34
Compression ratio ............................................ 62
Computer...................................................... 72, 76
Connector cover................................................... 2
Continuous ......................................... 49, E32
Copying images............................... 70, E42
Crop.......................................................... 68, E13
Cyanotype .......................................... 49, E34
D
Date and time .......................... 16, 88, E47
Date format......................................... 17, E47
Daylight saving time ..................... 17, E49
DC input connector............................................ 2
Delete........................................................................ 31
Digital zoom......................................................... 25
Direct print ........................................... 72, E19
D-Lighting ............................................ 70, E10
DPOF.................................................................. F20
DPOF print.................................................... E26
DSCN................................................................ E69
Dusk/dawn i..................................................... 38
E
Easy auto mode.................................................. 34
Editing movies ............................................ E15
EN-MH2 ............................................. E70, F4
Exposure compensation............................... 59
Extension....................................................... E69
Eye-Fi upload.................................... 89, E64
Eyelet for camera strap..................................... 2
F
Face detection .................................................... 65
File name....................................................... E69
Fill flash.................................................................... 53
Fireworks show m.......................................... 40
Firmware version............................. 89, E68
Flash ..................................................................... 2, 51
Flash lamp ....................................................... 3, 52
Flash mode.................................................... 51, 53
Flash off................................................................... 53
Focus................................................................ 26, 65
Focus indicator ...................................................... 7
Focus lock .............................................................. 66
Folder name ................................................ E69
Food u.................................................................... 39
Format internal memory ............ 89, E59
Format memory cards......... 14, 89, E59
Formatting ................................. 14, 89, E59
F23
Technical Notes and Index
FSCN................................................................. E69
Full-frame playback ......................................... 29
Full-time AF ........................................ 83, E45
H
HDMI................................................................. E61
HDMI 3D output........................................ E61
HDMI cable .......................................... 72, E17
HDMI device control............................... E61
HDMI mini connector........................................ 2
Help ........................................................................... 35
I
Identifier......................................................... E69
Image copy ......................................... 70, E42
Image mode......................................................... 62
Imprinting date and time ........... 19, E53
Internal memory................................................ 14
ISO sensitivity..................................... 49, E33
J
JPG..................................................................... E69
L
Landscape c...................................................... 36
Language ............................................. 89, E60
Lens............................................................... 2, F16
Lithium batteries ................................................ 11
M
Macro mode......................................................... 57
Memory capacity................................................ 21
Memory card......................................................... 13
Memory card slot ......................................... 3, 13
Monitor.................................................... 3, 6, F7
Monitor settings................................ 88, E51
Motion detection............................ 88, E55
MOV.................................................................. E69
Movie length........................................................ 82
Movie menu......................................................... 83
Movie options .................................. 83, E44
Movie playback ................................................. 84
Movie recording ................................................ 80
Movie-record button ......................................... 3
MPO.................................................................. E69
Multi selector .......................................................... 3
Multi-shot 16............................................... E32
Museum l.......................................................... 40
N
Night landscape j......................................... 39
Night portrait e................................................ 37
Nikon Transfer 2 ............................... 73, 75, 77
Number of exposures remaining... 21, 63
O
Optical zoom ...................................................... 24
Optional accessories .............................. E70
P
Panorama assist U........................... 41, E2
Panorama Maker 6.................... 41, 75, E4
Paper size .................................... E23, E24
Party/indoor f.................................................. 37
Pet portrait auto release .............................. 42
Pet portrait O.................................................... 42
Photo info ...................................................... E51
PictBridge............................. 72, E19, F20
F24
Technical Notes and Index
Playback........................................................ 29, 84
Playback button.................................................... 3
Playback menu ................................. 70, E35
Playback mode ................................................... 29
Playback zoom.................................................... 68
Portrait b.............................................................. 36
Power............................................................... 20, 22
Power switch .............................................. 20, 22
Power switch/power-on lamp..................... 2
Power-on lamp.......................................... 20, 22
Preset manual ............................................ E30
Pressing halfway................................................ 27
Print ............ 70, 72, E22, E24, E35
Print date..................................... 19, 88, E53
Print order............................................ 70, E35
Print order date option
... 19, E36, E37
Printer...................................................... 72, E19
Protect.................................................... 70, E39
R
Rechargeable battery............................ E70
Rechargeable nickel-metal hydride
batteries ................................................................ 11
Recording movies............................................. 80
Red-eye reduction................................... 53, 54
Reset all ................................................. 89, E65
Rotate image ..................................... 70, E41
RSCN................................................................. E69
S
Scene mode ................................................ 35, 36
Self-timer................................................................ 55
Self-timer lamp............................................. 2, 56
Sepia....................................................... 49, E34
Setup menu.......................................................... 88
Shooting.............................................. 20, 23, 26
Shooting menu ............................... 49, E29
Shooting mode button.................................... 3
Shutter sound............................................. E57
Shutter speed...................................................... 27
Shutter-release button ............................ 2, 26
Side zoom control ...................................... 2, 24
Single...................................................... 49, E32
Single AF............................................... 83, E45
Skin softening.......... 46, 70, E11, E27
Sleep mode.................................................. E58
Slide show ........................................... 70, E38
Slow sync ............................................................... 53
Small picture ....................................... 70, E12
Smart portrait menu...................... 46, E27
Smart portrait mode....................................... 44
Smile timer ......................................... 46, E28
Snow z.................................................................. 38
Sound settings.................................. 88, E57
Speaker....................................................................... 2
Sports d................................................................. 37
SSCN................................................................. E69
Standard color.................................. 49, E34
Strap ............................................................................. 4
Sunset h............................................................... 38
T
Thumbnail display ............................................ 69
F25
Technical Notes and Index
Time difference ......................................... E50
Time zone ........................... 17, E47, E50
Time zone and date.............. 16, 88, E47
Tripod socket ........................................... 3, F18
TV ............................................................... 72, E17
TV settings ........................................... 89, E61
U
USB cable ................... 71, 76, E21, E70
USB connector and audio/video output
.................................. 2, 71, 76, E17, E19
V
Vibration reduction........................ 88, E54
Video mode.................................................. E61
ViewNX 2....................................................... 73, 75
Vivid color ........................................... 49, E34
Volume .................................................................... 85
W
Welcome screen............................. 88, E46
White balance ................................... 49, E29
Wind noise reduction................... 83, E45
Z
Zoom ........................................................................ 24
Zoom control ................................................ 2, 24
Zoom in................................................................... 24
Zoom out............................................................... 24
2012
No reproduction in any form of this manual, in whole or in part
(except for brief quotation in critical articles or reviews), may be
made without written authorization from NIKON CORPORATION.
Printed in Hong Kong
CT2A01(11)
6MM25811-01
DIGITAL CAMERA
User’s Manual

Navigation menu