Nikon Coolpix S570 Users Manual

Nortel-Networks-Coolpix-S570-Users-Manual-346109 nortel-networks-coolpix-s570-users-manual-346109

Nikon-S570-Owner-S-Manual nikon-s570-owner-s-manual

Manual S570_ENnoprint Nikon COOLPIX S570 User Manual | Manual Device

COOLPIX S570 S570_ENnoprint

S570 to the manual 28399f30-5904-40f2-9d8d-56159bc5cfd4

2015-08-19

: Nikon Nikon-Coolpix-S570-Users-Manual-791518 nikon-coolpix-s570-users-manual-791518 nikon pdf

Open the PDF directly: View PDF PDF.
Page Count: 172

DownloadNikon Nikon-Coolpix-S570-Users-Manual-  Nikon-coolpix-s570-users-manual
Open PDF In BrowserView PDF
DIGITAL CAMERA

User’s Manual
No reproduction in any form of this manual, in whole or in part
(except for brief quotation in critical articles or reviews), may be
made without written authorization from NIKON CORPORATION.

6MM72511-01

En

Printed in China
CT9G01(11)

En

Trademark Information
• Microsoft, Windows and Windows Vista are either registered trademarks or trademarks
of Microsoft Corporation in the United States and/or other countries.
• Macintosh, Mac OS, and QuickTime are trademarks of Apple Inc.
• Adobe and Acrobat are registered trademarks of Adobe Systems Inc.
• The SD logo is a trademark of the SD Card Association.
• PictBridge is a trademark.
• All other trade names mentioned in this manual or the other documentation
provided with your Nikon product are trademarks or registered trademarks of their
respective holders.

Introduction

First Steps
A

Basic Photography and Playback: Auto Mode

C

Shooting Suited for the Scene

F

Taking Pictures of Smiling Faces (Smart
Portrait Mode)

c

More on Playback/In-Camera Editing

D

Movies

Connecting to Televisions, Computers and Printers
d

Shooting, Playback and Setup Menus

Technical Notes

i

For Your Safety
To prevent damage to your Nikon product or injury to yourself or to others, read
the following safety precautions in their entirety before using this equipment.
Keep these safety instructions where all those who use the product will read them.
The consequences that could result from failure to observe the precautions listed
in this section are indicated by the following symbol:
This icon marks warnings, information that should be read before using this Nikon
product, to prevent possible injury.

WARNINGS
Turn off in the event of
malfunction
Should you notice smoke or an unusual
smell coming from the camera or AC
adapter, unplug the AC adapter and
remove the battery immediately, taking
care to avoid burns. Continued
operation could result in injury. After
removing or disconnecting the power
source, take the equipment to a Nikonauthorized service representative for
inspection.
Do not disassemble
Touching the internal parts of the
camera or AC adapter could result in
injury. Repairs should be performed
only by qualified technicians. Should
the camera or AC adapter break open
as the result of a fall or other accident,
take the product to a Nikon-authorized
service representative for inspection,
after unplugging the product and/or
removing the battery.

ii

Do not use the camera or AC
adapter in the presence of
flammable gas
Do not use electronic equipment in the
presence of flammable gas, as this
could result in explosion or fire.
Handle the camera strap with
care
Never place the strap around the neck
of an infant or child.
Keep out of reach of children
Particular care should be taken to
prevent infants from putting the
battery or other small parts into their
mouths.

For Your Safety

Observe caution when
handling the battery
The battery may leak or explode if
improperly handled. Observe the
following precautions when handling
the battery for use in this product:
• Before replacing the battery, turn the
product off. If you are using the AC
adapter, be sure it is unplugged.
• Only use a Rechargeable Li-ion
Battery EN-EL10 (supplied). Charge
the battery by inserting it in a Battery
Charger MH-63 (supplied).
• When inserting the battery, do not
attempt to insert it upside down or
backwards.
• Do not short or disassemble the
battery or attempt to remove or
break the battery insulation or casing.
• Do not expose the battery to flame
or to excessive heat.
• Do not immerse in or expose to
water.
• Return the battery to the battery case
for transportation. Do not transport
or store with metal objects such as
necklaces or hairpins.
• The battery is prone to leakage when
fully discharged. To avoid damage to
the product, be sure to remove the
battery when no charge remains.
• Discontinue use immediately should
you notice any change in the battery,
such as discoloration or deformation.
• If liquid from the damaged battery
comes in contact with clothing or
skin, rinse immediately with plenty of
water.

•

•

•

•

•

•

Observe the following
precautions when handling the
battery charger
Keep dry. Failure to observe this
precaution could result in fire or
electric shock.
Dust on or near the metal parts of the
plug should be removed with a dry
cloth. Continued use could result in
fire.
Do not handle the power cable or go
near the battery charger during
lightning storms. Failure to observe
this precaution could result in
electric shock.
Do not damage, modify, forcibly tug
or bend the power cable, place it
under heavy objects, or expose it to
heat or flames. Should the insulation
be damaged and the wires become
exposed, take it to a Nikonauthorized service representative for
inspection. Failure to observe these
precautions could result in fire or
electric shock.
Do not handle the plug or battery
charger with wet hands. Failure to
observe this precaution could result
in electric shock.
Do not use with travel converters or
adapters designed to convert from
one voltage to another or with DCto-AC inverters. Failure to observe
this precaution could damage the
product or cause overheating or fire.

iii

For Your Safety

Use appropriate cables
When connecting cables to the input
and output jacks, use only the cables
provided or sold by Nikon for the
purpose, to maintain compliance with
product regulations.
Handle moving parts with care
Be careful that your fingers or other
objects are not pinched by the lens
cover or other moving parts.
CD-ROMs
The CD-ROMs supplied with this device
should not be played back on audio CD
equipment. Playing CD-ROMs on an
audio CD player could cause hearing
loss or damage the equipment.
Observe caution when using
the flash
Using the flash close to your subject’s
eyes could cause temporary visual
impairment. Particular care should be
observed if photographing infants,
when the flash should be no less than
one meter (3 ft. 4 in.) from the subject.
Do not operate the flash with
the flash window touching a
person or object
Failure to observe this precaution could
result in burns or fire.

iv

Avoid contact with liquid
crystal
Should the monitor break, care should
be taken to avoid injury caused by
broken glass and to prevent liquid
crystal from the monitor touching the
skin or entering the eyes or mouth.
Turn the power off when using
inside an airplane or the
hospital
Turn the power off while inside the
airplane during take off or landing.
Follow the instructions of the hospital
when using while in a hospital. The
electromagnetic waves given out by
this camera may disrupt the electronic
systems of the airplane or the
instruments of the hospital.

Notices
Notice for Customers in the U.S.A.
Federal Communications
Commission (FCC) Radio Frequency
Interference Statement
This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to Part
15 of the FCC rules. These limits are
designed to provide reasonable
protection against harmful interference
in a residential installation. This
equipment generates, uses, and can
radiate radio frequency energy and, if
not installed and used in accordance
with the instructions, may cause
harmful interference to radio
communications. However, there is no
guarantee that interference will not
occur in a particular installation. If this
equipment does cause harmful
interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct the
interference by one or more of the
following measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an
outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced
radio/television technician for help.

CAUTIONS
Modifications
The FCC requires the user to be notified
that any changes or modifications
made to this device that are not
expressly approved by Nikon
Corporation may void the user’s
authority to operate the equipment.
Interface Cables
Use the interface cables sold or
provided by Nikon for your equipment.
Using other interface cables may
exceed the limits of Class B Part 15 of
the FCC rules.
Notice for customers in the State of
California
WARNING
Handling the cord on this product will
expose you to lead, a chemical known
to the State of California to cause birth
defects or other reproductive harm.
Wash hands after handling.
Nikon Inc.,
1300 Walt Whitman Road
Melville, New York 11747-3064
USA
Tel: 631-547-4200

v

Notices

Notice for customers in Canada
CAUTION
This Class B digital apparatus complies
with Canadian ICES-003.
ATTENTION
Cet appareil numérique de la classe B
est conforme à la norme NMB-003 du
Canada.
Notice for customers in Europe
This symbol indicates that this
product is to be collected
separately.
The following apply only to
users in European countries:
• This product is designated for
separate collection at an appropriate
collection point. Do not dispose of as
household waste.
• For more information, contact the
retailer or the local authorities in
charge of waste management.
This symbol on the battery
indicates that the battery is to
be collected separately. The
following apply only to users
in European countries:
• All batteries, whether marked with
this symbol or not, are designated for
separate collection at an appropriate
collection point. Do not dispose of as
household waste.
• For more information, contact the
retailer or the local authorities in
charge of waste management.

vi

Table of Contents
For Your Safety........................................................................................................................................ ii
WARNINGS.................................................................................................................................................................. ii
Notices ....................................................................................................................................................... v

Introduction ...........................................................................................................................................1
About This Manual ................................................................................................................................ 1
Information and Precautions............................................................................................................. 2
Parts of the Camera............................................................................................................................... 4
The Camera Body ...................................................................................................................................................4
The Monitor................................................................................................................................................................6
Basic Operations..................................................................................................................................... 8
The A (Shooting Mode) Button...................................................................................................................8
The c (Playback) Button..................................................................................................................................8
The Multi Selector...................................................................................................................................................9
The d Button....................................................................................................................................................10
Switching Between Tabs.................................................................................................................................10
Help Displays..........................................................................................................................................................11
Shutter-release Button .....................................................................................................................................11
Attaching the Camera Strap .........................................................................................................................11

First Steps ............................................................................................................................................. 12
Charging the Battery ..........................................................................................................................12
Inserting the Battery ...........................................................................................................................14
Removing the Battery .......................................................................................................................................15
Turning On and Off the Camera.................................................................................................................15
Setting Display Language, Date and Time .................................................................................16
Inserting Memory Cards ....................................................................................................................18
Removing Memory Cards...............................................................................................................................18

A Basic Photography and Playback: Auto Mode ................................................................. 20
Step 1 Turn the Camera On and Select A (Auto) Mode .......................................................20
Indicators Displayed in A (Auto) Mode ...............................................................................................21
Step 2 Frame a Picture .......................................................................................................................22
Using the Zoom....................................................................................................................................................23
Step 3 Focus and Shoot .....................................................................................................................24
Step 4 Playing Back and Deleting Pictures .................................................................................26
Playing Back Pictures (Playback Mode)..................................................................................................26
Deleting Pictures..................................................................................................................................................26
Using the Flash......................................................................................................................................28
Setting the Flash Mode....................................................................................................................................28
Taking Pictures with the Self-timer ...............................................................................................30

vii

Table of Contents
Macro Mode...........................................................................................................................................31
Exposure Compensation ...................................................................................................................32

C Shooting Suited for the Scene................................................................................................ 33
Shooting in Scene Mode ...................................................................................................................33
Choosing a Scene Mode .................................................................................................................................33
Features .....................................................................................................................................................................34
Shooting in the Scene Mode Selected by the Camera (Scene Auto Selector) .............41
Taking Pictures in Food Mode.....................................................................................................................43
Taking Pictures for a Panorama ..................................................................................................................45

F Taking Pictures of Smiling Faces (Smart Portrait Mode) .............................................. 47
Using Smart Portrait Mode...............................................................................................................47
Smart portrait menu ..........................................................................................................................................48

c More on Playback/In-Camera Editing ................................................................................. 50

viii

Viewing Multiple Pictures: Thumbnail Playback ......................................................................50
Calendar Display...................................................................................................................................................51
Taking a Closer Look: Playback Zoom ..........................................................................................52
Viewing Pictures by Date (List by Date Mode) ..........................................................................53
Selecting a Date in List by Date Mode ...................................................................................................53
Using List by Date Mode.................................................................................................................................54
List by Date Menu ...............................................................................................................................................55
Image Searching in Auto Sort Mode.............................................................................................56
Displaying Pictures in Auto Sort Mode ..................................................................................................56
Using Auto Sort Mode......................................................................................................................................58
Auto Sort Menu ....................................................................................................................................................58
Sorting Favorite Pictures (Favorite Pictures Mode) .................................................................59
Preparing Favorites Folder (setting icons)............................................................................................60
Sorting Pictures to a Favorites Folder .....................................................................................................61
Viewing the Pictures in Favorites Folder...............................................................................................62
Removing Pictures from Favorites............................................................................................................62
Using Favorite Pictures Mode......................................................................................................................63
Favorite Pictures Menu ....................................................................................................................................64
Voice Memos: Recording and Playback .......................................................................................66
Recording Voice Memos.................................................................................................................................66
Playing Voice Memos........................................................................................................................................67
Deleting Voice Memos.....................................................................................................................................67
Editing Pictures.....................................................................................................................................68
Enhancing Contrast and Saturation (Quick Retouch)...................................................................70
Enhancing Brightness and Contrast: D-Lighting..............................................................................71

Table of Contents
Making Skin Appear Smoother (Skin Softening)..............................................................................72
Resizing Pictures: Small Picture...................................................................................................................73
Creating a Cropped Copy: Crop .................................................................................................................74

D Movies ............................................................................................................................................. 75
Recording Movies ................................................................................................................................75
The Movie Menu...................................................................................................................................76
D Movie Options................................................................................................................................................76
I Autofocus Mode ...........................................................................................................................................77
w Electronic VR ...................................................................................................................................................77
Movie Playback .....................................................................................................................................78
Deleting Movie Files...........................................................................................................................................78

Connecting to Televisions, Computers and Printers ............................................................ 79
Connecting to a TV..............................................................................................................................79
Connecting to a Computer...............................................................................................................80
Before Connecting the Camera..................................................................................................................80
Transferring Pictures from the Camera to a Computer ...............................................................81
Connecting to a Printer......................................................................................................................84
Connecting the Camera and Printer........................................................................................................85
Printing Pictures One at a Time ..................................................................................................................86
Printing Multiple Pictures ...............................................................................................................................87
Creating a DPOF Print Order: Print Set.........................................................................................90

d Shooting, Playback and Setup Menus ............................................................................. 93
Shooting Options: The Shooting Menu .......................................................................................93
Displaying the Shooting Menu ..................................................................................................................93
A Image Mode ....................................................................................................................................................94
B White Balance.................................................................................................................................................96
C Continuous ......................................................................................................................................................98
E ISO Sensitivity..................................................................................................................................................99
F Color Options............................................................................................................................................... 100
G AF Area Mode .............................................................................................................................................. 101
Functions that Cannot Be Applied Simultaneously.................................................................... 105
Playback Options: The Playback Menu ..................................................................................... 106
Displaying the Playback Menu................................................................................................................. 106
b Slide Show..................................................................................................................................................... 108
c Delete ................................................................................................................................................................ 109
d Protect ........................................................................................................................................................... 109
f Rotate Image................................................................................................................................................ 110
h Copy ................................................................................................................................................................. 110

ix

Table of Contents
Basic Camera Setup: The Setup Menu....................................................................................... 112
Displaying the Setup Menu........................................................................................................................ 113
a Menus .............................................................................................................................................................. 114
c Welcome Screen........................................................................................................................................ 115
d Date.................................................................................................................................................................... 116
e Monitor Settings ....................................................................................................................................... 119
f Date Imprint.................................................................................................................................................. 120
w Electronic VR................................................................................................................................................. 121
U Motion Detection ...................................................................................................................................... 122
h AF Assist ......................................................................................................................................................... 123
u Digital Zoom ............................................................................................................................................... 123
i Sound Settings ........................................................................................................................................... 124
k Auto Off .......................................................................................................................................................... 124
l Format Memory/m Format Card ................................................................................................... 125
n Language ........................................................................................................................................................ 126
o Video Mode .................................................................................................................................................. 126
d Blink Warning ............................................................................................................................................. 126
p Reset All ........................................................................................................................................................... 128
r Firmware Version ..................................................................................................................................... 130

Technical Notes................................................................................................................................131
Optional Accessories ....................................................................................................................... 131
Approved Memory Cards ............................................................................................................................ 131
File and Folder Names..................................................................................................................... 132
Caring for the Camera ..................................................................................................................... 133
Cleaning ................................................................................................................................................................. 135
Storage .................................................................................................................................................................... 136
Error Messages................................................................................................................................... 137
Troubleshooting................................................................................................................................ 142
Specifications ..................................................................................................................................... 149
Supported Standards ..................................................................................................................................... 152
Index ...................................................................................................................................................... 153

x

Introduction

About This Manual

Introduction

Thank you for your purchase of a Nikon COOLPIX S570 digital camera. This manual
was written to help you enjoy taking pictures with your Nikon digital camera. Read
this manual thoroughly before use, and keep it where all those who use the
product will read it.
Symbols and Conventions
To make it easier to find the information you need, the following symbols and
conventions are used:

B

This icon marks cautions,
information that should be read
before use, to prevent damage to
the camera.

D

This icon marks tips, additional
information that may be helpful
when using the camera.

C

This icon marks notes, information
that should be read before using
the camera.

A

This icon indicates that more
information is available elsewhere
in this manual or in the Quick Start
Guide.

Notations
• A Secure Digital (SD) memory card is referred to as a “memory card”.
• The setting at the time of purchase is referred to as the “default setting”.
• The names of menu items displayed in the camera monitor, and the names of
buttons or messages displayed in the computer monitor appear in bold.
Screen Samples
In this manual, images are sometimes omitted from monitor display samples so
that monitor indicators can be more clearly shown.
Illustrations and Screen Display
Illustrations and text displays shown in this manual may differ from actual display.

C

Internal Memory and Memory Cards

Pictures taken with this camera can be stored in the camera’s internal memory or on removable
memory cards. If a memory card is inserted, all new pictures will be stored on the memory card and
delete, playback and format operations will apply only to the pictures on the memory card. The
memory card must be removed before the internal memory can be formatted or used to store
pictures to, or delete, or view pictures.

1

Information and Precautions
Life-Long Learning

Introduction

As part of Nikon’s “Life-Long Learning” commitment to ongoing product support and education,
continually updated information is available online at the following sites:
• For users in the U.S.A.: http://www.nikonusa.com/
• For users in Europe and Africa: http://www.europe-nikon.com/support/
• For users in Asia, Oceania, and the Middle East: http://www.nikon-asia.com/
Visit these sites to keep up-to-date with the latest product information, tips, answers to frequently
asked questions (FAQs), and general advice on digital imaging and photography. Additional
information may be available from the Nikon representative in your area. See the URL below for
contact information:
http://imaging.nikon.com/

Use Only Nikon Brand Electronic Accessories
Nikon COOLPIX cameras are designed to the highest standards and include complex electronic
circuitry. Only Nikon brand electronic accessories (including battery chargers, batteries and AC
adapters) certified by Nikon specifically for use with this Nikon digital camera are engineered and
proven to operate within the operational and safety requirements of this electronic circuitry.
THE USE OF NON-NIKON ELECTRONIC ACCESSORIES COULD DAMAGE THE CAMERA AND MAY
VOID YOUR NIKON WARRANTY.
The use of third-party rechargeable Li-ion batteries not bearing the
Nikon holographic seal could interfere with normal operation of the
camera or result in the batteries overheating, igniting, rupturing, or
Holographic seal:
leaking.
Identifies this device as an
For more information about Nikon brand accessories, contact a local
authentic Nikon product.
authorized Nikon dealer.

Before Taking Important Pictures
Before taking pictures on important occasions (such as at weddings or before taking the camera on
a trip), take a test shot to ensure that the camera is functioning normally. Nikon will not be held liable
for damages or lost profits that may result from product malfunction.

About the Manuals
• No part of the manuals included with this product may be reproduced, transmitted, transcribed,
stored in a retrieval system, or translated into any language in any form, by any means, without
Nikon’s prior written permission.
• Nikon reserves the right to change the specifications of the hardware and software described in
these manuals at any time and without prior notice.
• Nikon will not be held liable for any damages resulting from the use of this product.
• While every effort was made to ensure that the information in these manuals is accurate and
complete, we would appreciate it were you to bring any errors or omissions to the attention of the
Nikon representative in your area (address provided separately).

2

Information and Precautions

Notice Concerning Prohibition of Copying or Reproduction

Introduction

Note that simply being in possession of material that was digitally copied or reproduced by means
of a scanner, digital camera or other device may be punishable by law.
• Items prohibited by law from being copied or reproduced
Do not copy or reproduce paper money, coins, securities, government bonds or local government
bonds, even if such copies or reproductions are stamped “Sample”. The copying or reproduction
of paper money, coins, or securities which are circulated in a foreign country is prohibited. Unless
the prior permission of the government was obtained, the copying or reproduction of unused
postage stamps or post cards issued by the government is prohibited. The copying or
reproduction of stamps issued by the government and of certified documents stipulated by law is
prohibited.
• Cautions on certain copies and reproductions
The government has issued cautions on copies or reproductions of securities issued by private
companies (shares, bills, checks, gift certificates, etc.), commuter passes or coupon tickets, except
when a minimum of necessary copies are to be provided for business use by a company. Also, do
not copy or reproduce passports issued by the government, licenses issued by public agencies
and private groups, ID cards and tickets, such as passes and meal coupons.
• Comply with copyright notices
The copying or reproduction of copyrighted creative works such as books, music, paintings,
woodcut prints, maps, drawings, movies and photographs is governed by national and
international copyright laws. Do not use this product for the purpose of making illegal copies or to
infringe copyright laws.

Disposing of Data Storage Devices
Please note that deleting images or formatting data storage devices such as memory cards or builtin camera memory does not completely erase the original image data. Deleted files can sometimes
be recovered from discarded storage devices using commercially available software, potentially
resulting in the malicious use of personal image data. Ensuring the privacy of such data is the user’s
responsibility.
Before discarding a data storage device or transferring ownership to another person, erase all data
using commercial deletion software, or format the device and then completely refill it with images
containing no private information (for example, pictures of empty sky). Be sure to also replace any
pictures selected for the welcome screen (A 115). Care should be taken to avoid injury or damage
to property when physically destroying data storage devices.

3

Parts of the Camera
The Camera Body
10

1

2 3

4

5

Introduction

9
8

7

6

Lens cover closed

11

4

1

Shutter-release button..............................24

5

Built-in flash......................................................28

6

Lens .........................................................135, 149

7

Built-in microphone............................66, 75

2

Zoom control..................................................23
f : wide .......................................................23
g : tele..........................................................23
h : thumbnail playback.....................50
i : playback zoom................................52
j : help ........................................................11

8

Eyelet for camera strap..............................11

9

Cable connector............................79, 81, 85

3

Power switch/Power-on lamp
.......................................................................20, 124

4

Self-timer lamp...............................................30
AF-assist illuminator.................................123

10 Pin cover.............................................79, 81, 85
11 Lens cover ......................................................133

Parts of the Camera

Introduction

1
2
3
4
5
6
7
8
9

10

11

12

13

14

15

1

Flash lamp ........................................................ 29

2

Speaker........................................................67, 78

10 Tripod socket

3

A (shooting mode) button..................... 8

4

c (playback) button........................... 8, 26

5

Multi selector..................................................... 9

Power connector cover
12 (for connection to optional AC
adapter)........................................................... 131

6

k (apply selection) button...................... 9

13 Battery chamber ........................................... 14

7

l (delete) button.................26, 27, 67, 78

14 Memory card slot ......................................... 18

8

d button ........ 10, 33, 76, 93, 106, 113

15 Battery latch............................................. 14, 15

9

Monitor.................................................................. 6

11

Battery-chamber/
memory card slot cover ................... 14, 18

5

Parts of the Camera

The Monitor
Introduction

The following indicators may appear in the monitor during shooting and playback
(actual display varies with current camera settings).
The indicators that appear in the monitor during shooting and playback disappear
after a few seconds (A 119).

Shooting
2

28
27

2

4

6

5
3

1

7
8
9
10 11

26

25
24

12
21
1600
600

23

22
20

17 15

19

18

Shooting mode* ....................20, 33, 47, 75
Macro mode.................................................... 31
Zoom indicator...................................... 23, 31
AE/AF-L indicator ......................................... 46
Focus indicator .............................................. 24
Flash mode....................................................... 28
Battery level indicator................................ 20
Motion detection icon ................... 21, 122
Electronic VR icon ..................................... 121
“Date not set” indicator ...............116, 137
Travel destination indicator................ 116
Date imprint ................................................. 120
Image mode.................................................... 94
13
Movie options ................................................ 76
a Number of exposures remaining
14 (still pictures)............................................... 20
b Movie length .............................................. 75
1
2
3
4
5
6
7
8
9
10
11
12

6

15
16
17
18
19
20
21
22
23
24
25
26
27
28

* Differs according to the current shooting mode.

13

999

1/125 F2.7

16

14

999 a
9999
1m00s b
1m00s

Internal memory indicator......................21
Smile timer........................................................49
Aperture .............................................................24
Skin softening .................................................48
Shutter speed .................................................24
ISO sensitivity ..........................................29, 99
Exposure compensation value ............32
Focus area.............................................. 24, 101
Focus area (Face Priority).............. 24, 101
Color options ............................................... 100
White balance mode..................................96
Continuous shooting mode..................98
Self-timer indicator......................................30
Blink proof icon..............................................49

Parts of the Camera

Introduction

Playback
4
1

16
15
14

19
18
17

2

15/11/2009
9999.JPG

3
5
6

12:00

7

13
12

999

10
11

9

999

8
999 999 a
9999 9999
1m00s b
1m00s

1
2
3
4
5
6
7
8
1
2

Date of recording......................................... 16
Time of recording......................................... 16
Volume indicator.................................. 66, 78
Category icon in
auto sort mode1 ............................................ 56
Favorites folder icon in
favorite pictures mode1 ........................... 62
Battery level indicator................................ 20
Protect icon................................................... 109
Image mode2 .................................................. 94
Movie options2 .............................................. 76
a Current frame number/
total number of frames ........................ 26
b Movie length .............................................. 78

9
10
11
12
13
14
15
16
17
18
19

Internal memory indicator......................26
Favorite pictures guide.............................61
Movie playback guide ...............................78
List by date guide.........................................53
Print set icon....................................................90
Small picture icon ........................................73
D-Lighting icon..............................................71
Quick retouch icon......................................70
Skin softening icon......................................72
Voice memo icon .........................................67
File number and type ............................. 132

The icon for the selected category in auto sort mode or the favorites folder currently
selected in playback mode is displayed.
Differs according to the settings configured during shooting.

7

Basic Operations
The A (Shooting Mode) Button
Introduction

• Press the A button in playback mode to enter
shooting mode.
• Press the A button in shooting mode to display
the “shooting-mode selection” menu and change
the shooting mode.

The Shooting-mode Selection Menu
Use the multi selector (A 9) to select the following shooting modes.
1
2
3
4

Auto mode

1.
2.
3.
4.

A (auto) mode (A 20)
x Scene mode (A 33)*
F Smart portrait mode (A 47)
D Movie mode (A 75)

* The icon displayed differs depending upon the last
mode selected.

While the shooting-mode selection menu is displayed, press the A button to
continue shooting without changing the shooting mode.

The c (Playback) Button
• Press the c button in shooting mode to enter
playback mode.
• Press the c button in playback mode to display
the “playback-mode selection menu” and change
the playback mode.
• If the camera is turned off, hold down the c
button to turn the camera on in playback mode.

The Playback-mode Selection Menu
Use the multi selector (A 9) to select the following playback modes.
1
2
3
4

Play

1.
2.
3.
4.

c Playback mode (A 26)
h Favorite pictures mode (A 59)
F Auto sort mode (A 56)
C List by date mode (A 53)

While the playback-mode selection menu is displayed, press the c button to
return to playback mode without changing the playback mode.

8

Basic Operations

The Multi Selector
Introduction

This section describes standard uses of the multi selector to select modes, select
menu options and to apply selection.

Shooting
Display m (flash mode) (A 28) menu or move cursor up

Display n (self-timer)
(A 30) menu

Display o (exposure
compensation) (A 32)
guide
Apply selection

Flash mode

Display p (macro mode) (A 31) menu or move cursor down

Playback
15/11/2009 15:30
0004.JPG

Select previous
picture

4

4

Select next picture

Menu Display

Move cursor up
Move cursor left
or return to
previous screen

Move cursor right or go
to next screen (apply
selection)

Apply selection (go to
next screen)
Move cursor down

Beach/snow

Shooting menu
Image mode
White balance
Continuous
ISO sensitivity
Color options
Exit

C

Note on the Multi Selector

In this manual, H, I, J and K are used in some cases to indicate up, down, left and right
operations of the multi selector.

9

Basic Operations

The d Button
Introduction

Press the d button to display the menu for the
current mode.
• Use the multi selector to navigate the menus (A 9).
• Select a tab on the left side of the monitor to
display the corresponding menu.
• Press the d button again to exit the menu.
Displayed when the menu
contains two or more pages
Shooting menu
Image mode
White balance
Continuous
ISO sensitivity
Color options

• Top tab: Display the available menus
in the current mode
• Bottom tab: Display the setup menu

Exit

Displayed when there are one
or more menu items to follow
Displayed when there
are more previous
menu items

Shooting menu
AF area mode

AF area mode
Face priority
Auto
Manual
Center
Exit

Exit

Select an item, then press the k
Press the k button or the
button or the multi selector K to multi selector K to apply
proceed to the next set of options. selection.

Switching Between Tabs
Shooting menu
Image mode
White balance
Continuous
ISO sensitivity
Color options
Exit

Press the multi selector
J to highlight the tab.

10

Shooting menu
Image mode
White balance
Continuous
ISO sensitivity
Color options
Exit

Press the multi selector H or
I to select the tab, and press
either the k button or K.

Set up
Menus
Welcome screen
Date
Monitor settings
Date imprint
Exit

The selected menu is
displayed.

Basic Operations

Help Displays

White balance
For accurate color reproduction,
choose a setting that matches
the light source.

Exit

Introduction

Rotate the zoom control to g (j) when M/L is displayed at the lower right of
the menu screen to view a description of the currently selected menu option.
To return to the original menu, rotate the zoom control to g (j) again.

Back

Shutter-release Button
The camera features a two-stage shutter-release button. To set focus and
exposure, press the shutter-release button halfway, stopping when you feel
resistance. Focus and exposure lock while the shutter-release button is held in this
position. To release the shutter and take a picture, press the shutter-release button
the rest of the way down. Do not use force when pressing the shutter-release
button, as this may result in camera shake and blurred pictures.

Press the
shutter-release
button halfway
to set focus and
exposure

Press the
shutter-release
button the rest
of the way down
to take picture

Attaching the Camera Strap

11

First Steps

Charging the Battery
Charge the Rechargeable Li-ion Battery EN-EL10 (supplied) with the Battery
Charger MH-63 (supplied).

1

Connect the power cable in the following order: 1, 2.
• The CHARGE lamp will light (3).

First Steps

2
3
1

2

Insert the battery at an angle
as shown (1), and set it in the
battery charger (2).

1

• The CHARGE lamp starts blinking
when charging starts (3).
• About 100 minutes are required to
charge a fully depleted battery.

3

12

2

Charging the Battery
• The following chart explains CHARGE lamp status.
CHARGE lamp

Description
Battery charging.

On

Battery fully charged.

Flickers

• The battery is not inserted correctly. Remove the battery and
reinsert it into the battery charger so that the battery is lying
flat.
• Operating temperature range exceeded. Charge the battery
indoors with an ambient temperature of 5 °C to 35 °C (41 °F to
95 °F) before use.
• The battery is faulty. Stop charging immediately, unplug the
charger, and take both the battery and charger to your retailer
or Nikon service representative.

3

Remove the battery and unplug the charger when charging is
complete.

B

Notes on the Battery Charger

First Steps

Blinks

• The supplied battery charger is for use only with the Rechargeable Li-ion Battery EN-EL10. Be sure
to use only genuine Nikon brand rechargeable batteries.
• Be sure to read and follow the warnings for the battery charger on pages iii before using the
battery charger.

B

Notes on the Battery

• Be sure to read and follow the warnings for the battery on page iii and the section, “The Battery”
(A 134), before using the battery.
• If the battery is not used for an extended period, recharge it at least once every six months and run
it flat before returning it to storage.

C

AC Power Supply

To power the camera continuously for extended periods, use an AC Adapter EH-62D (available
separately from Nikon) (A 131). Do not, under any circumstances, use another make or model of
AC adapter. Failure to observe this precaution could result in overheating or in damage to the
camera.

13

Inserting the Battery
Insert a Rechargeable Li-ion Battery EN-EL10 (supplied) into your camera.
• Charge the battery before the first use or when the battery is running low
(A 12).

1

Open the battery-chamber/memory card slot
cover.

First Steps

• Slide the cover latch toward Y (1) and open the
battery-chamber/memory card slot cover (2).

2

Inserting the Battery.
• Confirm that the positive (+) and negative (–) terminals
are oriented correctly as described on the label at the
entrance of the battery chamber, and insert the
battery.
• Use the battery to push the orange battery latch in the
direction indicated by the arrow (1) and fully insert
the battery (2). When the battery is fully inserted, the
battery latch will lock it in place.

B

Inserting the Battery

Inserting the battery upside down or backwards could
damage the camera. Be sure to check the battery is in the
correct orientation.

3

Close the battery-chamber/memory card slot
cover.
• Close the battery-chamber/memory card slot cover
(1), and slide the cover latch to the Z position (2).

14

Inserting the Battery

Removing the Battery

First Steps

Turn the camera off and make sure that the power-on
lamp and the monitor have gone out before opening
the battery-chamber/memory card slot cover.
To eject the battery, open the battery-chamber/
memory card slot cover and slide the orange battery
latch in the direction indicated by the arrow (1). The
battery can then be removed by hand (2).
• Note that the battery may become hot during use;
observe due caution when removing the battery.

Turning On and Off the Camera
Press the power switch to turn on the camera. The
power-on lamp (green) will light for a moment and
then the monitor will turn on. To turn off the camera,
press the power switch again.
When the camera is turned off, both the power-on
lamp and monitor will turn off.
If the camera is turned off, hold down the c button to turn the camera on in
playback mode.

C

Auto Power Off in Shooting Mode (Standby Mode)

If no operations are performed for about a minute (default setting), the monitor will turn off
automatically and the camera will enter standby mode. If no operations are performed for another
three minutes, the camera will turn off automatically (the auto off function).
• If the monitor is off in standby mode (the power-on lamp is blinking), press the power switch or
the shutter-release button to reactivate it.
• The time allowed to elapse from before the camera enters standby mode can be changed from
the Auto off option (A 124) in the setup menu (A 112).

15

Setting Display Language, Date and Time
A language-selection dialog is displayed the first time the camera is turned on.

1

Press the power switch to turn on the camera.
• The power-on lamp (green) will light for a moment and
the monitor will turn on.

First Steps

2

Use the multi selector to choose
the desired language and press the
k button.
• For information on using the multi
selector, see “The Multi Selector” (A 9).

3

Choose Yes and press the k button.
• If No is selected, the date and time will not be set.

Date
Set time and date?

No
Yes
Cancel

4

Press the multi selector J or K to select your
home time zone (A 118) and press the k
button.

London
Casablanca

Back

D

16

Daylight Saving Time

If daylight saving time is in effect, press the multi selector H in the
time zone selection screen displayed in step 4 to turn on the
daylight saving time option.
When the daylight saving time option is enabled, W is displayed at
the top of the monitor. To turn off the daylight saving time option,
press I.

London
Casablanca

Back

Setting Display Language, Date and Time

5

Edit the date and time.

Date
D

M

Y

01

01

2009

00

00
Edit

Press J to return to the previous item.

6

Choose the order in which the day, month and
year are displayed and press the k button or
press K.
• The settings are applied and monitor display exits to
shooting mode.

First Steps

• Press H or I to edit the highlighted item.
• Press K to move the highlight in the following order:
D (day) ➝ M (month) ➝ Y (year) ➝ hour ➝ minute ➝
DMY (the order in which the day, month, and year are
displayed)

Date
D

M

Y

15

11

2009

15

10
Edit

D

Changing the Date and Time

• Select Date from the Date item (A 116) in the setup menu (A 112) to change the current date
and time and follow the procedure described in step 5 above.
• Select Time zone from the Date item in the setup menu to change the time zone and daylight
saving time settings (A 116).

17

Inserting Memory Cards

First Steps

Image, sound, and movie files are stored in the camera’s internal memory
(approximately 47 MB) or on removable Secure Digital (SD) memory cards
(available separately) (A 131).
If a memory card is inserted in the camera, data are automatically stored on
the memory card and data recorded to the memory card can be played back,
deleted or transferred. Remove the memory card to store data in the internal
memory, or play back, delete or transfer data from the internal memory.

1

Confirm that the power-on lamp and the
monitor are off and open the batterychamber/memory card slot cover.
• Be sure to turn off the camera before opening the
battery-chamber/memory card slot cover.

2

Insert the memory card.
• Insert the memory card in the correct
orientation (as shown on the right) until it clicks
into place.
• Close the battery-chamber/memory card slot
cover.

B

Inserting Memory Cards

Inserting the memory card upside down or backwards
could damage the camera or the memory card. Be sure to
check the memory card is in the correct orientation.

Removing Memory Cards
Before removing memory cards, turn the camera off
and confirm that the power-on lamp and monitor are
off. Open the battery-chamber/memory card slot cover
and press the card in (1) to partially eject the card. The
card can then be removed by hand. Do not attempt to
remove the card at an angle (2).

18

Inserting Memory Cards

B

Formatting Memory Cards

B

The Write Protect Switch

Memory cards are equipped with a write protect switch. When
this switch is in the “lock” position, data cannot be written to,
or deleted from, the memory card. If the switch is in the “lock”
position, unlock it by sliding the switch to the “write” position
to record or delete pictures, or to format the memory card.

B

First Steps

If the message at right is displayed, the memory card must be
Card is not formatted.
Format card?
formatted before use (A 125). Note that formatting
permanently deletes all pictures and other data on the
No
memory card. Be sure to make copies of any pictures you wish to
Yes
keep before formatting the memory card.
To format the memory card, use the multi selector to choose Yes
and press the k button. The confirmation dialog will be displayed.
To start formatting, choose Format and press the k button.
• Do not turn the camera off or open the battery-chamber/memory card slot cover until formatting
is complete.
• The first time you insert the memory cards used in other devices into the COOLPIX S570, be sure to
format them using this camera (A 125).

Write protect switch

Memory Cards

• Use only Secure Digital memory cards.
• Do not perform the following during formatting, while data is being written to or deleted from the
memory card, or during data transfer to a computer. Failure to observe this precaution could result
in the loss of data or in damage to the camera or memory card:
- Take out the battery or memory card
- Turn off the camera
- Disconnect the AC adapter
• Do not format the memory card using a computer.
• Do not disassemble or modify.
• Do not drop, bend, or expose to water or strong physical shocks.
• Do not touch the metal terminals with your fingers or metal objects.
• Do not affix labels or stickers to the memory card.
• Do not leave in direct sunlight, closed vehicles or areas exposed to high temperatures.
• Do not expose to humidity, dust, or to corrosive gases.

19

Basic Photography and Playback: Auto Mode

Step 1 Turn the Camera On and Select A (Auto) Mode
This section describes how to take pictures in A (auto) mode, an automatic,
“point-and-shoot” mode recommended for first-time users of digital cameras.

1

Press the power switch to turn on the camera.
• The power-on lamp (green) will light for a moment and
the monitor will turn on. The lens will also extend.
• Proceed to step 4 if A is displayed.

Basic Photography and Playback: Auto Mode

2

Press the A button to display the
shooting-mode selection menu.

3

Press the multi selector H or I to choose A
and press the k button.

Auto mode

• The camera enters A (auto) mode.

4

Check the battery level and the number of
exposures remaining.

Battery level indicator

Battery Level
Monitor

Description

NO INDICATOR

Battery fully charged.

B

Battery low. Prepare to charge or
replace the battery.

N
Battery
exhausted.

Cannot take pictures. Recharge or
replace with a fully charged
battery.

11

Number of exposures
remaining

Number of Exposures Remaining
The number of pictures that can be stored depends on the capacity of the internal
memory or memory card and image mode setting (A 95).

20

Step 1 Turn the Camera On and Select A (Auto) Mode

Indicators Displayed in A (Auto) Mode
Shooting mode
A displayed in A
(auto) mode.

Motion detection icon
The effects of the subject
movement and camera shake
are reduced.

Internal memory indicator
Indicates that images will be stored on the
camera’s internal memory (approximately 47 MB).
When a memory card is inserted in the camera,
C does not appear and images will be stored on
the memory card.

Image mode
The combination of image
size and image quality
(compression) is displayed.
The default setting is L
Normal (4000×3000).

The indicators and photo info displayed during shooting and playback will turn off
after a few seconds (A 119). When the monitor has turned off in standby mode
to save power, press the power switch or the shutter-release button to reactivate it
(A 124).

D

Basic Photography and Playback: Auto Mode

11

Functions Available in A (Auto) Mode

In A (auto) mode, macro mode (A 31) and exposure compensation (A 32) can be applied and
pictures can be taken using the flash mode (A 28) and self-timer (A 30). Pressing the d button
in A (auto) mode allows you to specify settings for all shooting menu items (A 93) depending
upon the shooting situations.

D

Motion Detection

See Motion detection (A 122) in the setup menu (A 112) for more information.

D

Electronic Vibration Reduction

When the flash mode (A 28) is set to W (off) or Y (slow sync) with Electronic VR (A 121) in the
setup menu set to Auto, the R icon may appear in the monitor. The appearance of R indicates
shooting conditions in which the effects of camera shake can be pronounced. In these situations,
the camera reduces the effects of camera shake in pictures before recording them.

21

Step 2 Frame a Picture

1

Ready the camera.
• Hold the camera steadily in both hands, keeping your
fingers and other objects away from the lens, flash, AFassist illuminator, microphone, and speaker.

• When taking pictures in “tall” orientation, turn the
camera so that the built-in flash is above the lens.
Basic Photography and Playback: Auto Mode

22

2

Frame the picture.
• When the camera detects a face, that face will be
framed by a yellow double border (default setting).
• Up to 12 faces can be detected. When the camera
detects more than one face, the face closest to the
camera is framed by a double border AF area, and faces
11
outside the AF area are framed by single borders.
• AF area will not appear when shooting pictures of subjects other than people, or
framing a subject with which no face is recognized. Position the main subject near the
center of the monitor.

Step 2 Frame a Picture

Using the Zoom
Use the zoom control to activate optical zoom. Rotate
the zoom control to g to zoom in so that the subject
fills a larger area of the frame, or f to zoom out, thus
increasing the area visible in the frame.

Zoom out

Zoom in

A zoom indicator is displayed at the top of the monitor
when the zoom control is rotated.
Digital
zoom

Digital Zoom
When the camera is zoomed in to the maximum optical zoom position, rotating
and holding the zoom control at g triggers digital zoom. The subject is magnified
up to 4× the maximum optical zoom ratio.
Focus will be on the center of the screen (without active focus area display) when
digital zoom is in effect.

Maximum optical zoom

C

Basic Photography and Playback: Auto Mode

Optical
zoom

Digital zoom is
in effect.

Digital Zoom and Interpolation

Unlike optical zoom, digital zoom uses a digital imaging process known as interpolation to magnify
images, resulting in slight deterioration of picture quality.
Interpolation is applied at zoom positions beyond V. When zoom is increased beyond the V
position, interpolation is initiated and the zoom indicator turns yellow to indicate that interpolation
is being applied. The position of V moves to the right as image size decreases, allowing for
confirmation of the zoom positions at which shooting without interpolation is possible at the
current image mode setting.

When an image size is small
• Digital zoom can be disabled from the Digital zoom option (A 123) in the setup menu
(A 112).

23

Step 3 Focus and Shoot

1

Press the shutter-release button halfway.
• The camera focuses when the shutter-release button is
pressed halfway (A 11).
• When the subject is in focus, the active focus area
glows green.
When a face is detected:

Basic Photography and Playback: Auto Mode

1/125 F2.7

Shutter speed

Aperture

When a face is not detected:
• The camera automatically selects the focus area (one of
nine) containing the subject closest to the camera.
When the subject is in focus, the active focus area
glows green.
1/125 F2.7

Shutter speed

Aperture

• When digital zoom is used, the focus area is not
displayed and the camera focuses at the center of the frame. Once focus has been
acquired, the focus indicator (A 6) will glow green.
• When you press the shutter-release button halfway, the shutter speed and aperture
values also appear.
• Focus and exposure remain locked while the shutter-release button is pressed
halfway.
• If the focus area or focus indicator blinks red when the shutter-release button is
pressed halfway, the camera will be unable to focus. Change the composition and
press the shutter-release button halfway again.

2

Press the shutter-release button the rest of
the way down.
• The shutter is released and the picture will be recorded
to the memory card or internal memory.

24

Step 3 Focus and Shoot

B

During Recording

While pictures are being recorded, the number of exposures remaining will blink. Do not open the
battery-chamber/memory card slot cover while pictures are being recorded. Cutting power or
removing the memory card in these circumstances could result in loss of data or in damage to the
camera or card.

B

Autofocus

B

Face Priority

See “AF Area Mode” (A 101) or “Face Priority” (A 103) for more information about Face Priority.

D

Basic Photography and Playback: Auto Mode

Autofocus may not perform as expected in the following situations. In some rare cases, the subject
may not be in focus despite the fact that the active focus area and the focus indicator glow green:
• Subject is very dark
• Objects of sharply differing brightness are included in the scene (e.g. the sun is behind the subject
and is in deep shadow)
• No contrast between the subject and surroundings (e.g. when the subject is standing in front of a
white wall, wearing a white shirt)
• Several objects are at different distances from the camera (e.g. the subject is inside a cage)
• Subject is moving rapidly
In the situations noted above, try pressing the shutter-release button halfway to refocus several
times, or focus on another subject and use focus lock (A 102). When using focus lock, be sure that
the distance between the camera and the subject with which focus was locked is the same as that
for the actual subject.

AF-assist Illuminator and Flash

If the subject is poorly lit, the AF-assist illuminator (A 123) may light when the shutter-release
button is pressed halfway, or the flash (A 28) may fire when the shutter-release button is pressed
all the way down.

25

Step 4 Playing Back and Deleting Pictures
Playing Back Pictures (Playback Mode)
Press the c (Playback) button.

Basic Photography and Playback: Auto Mode

A (shooting mode) button
• The last picture taken will be displayed in fullframe playback mode.
• Press the multi selector H, I, J or K to view
additional pictures. Press and hold H, I, J
or K to fast forward.
• Pictures may be displayed briefly at low
multi selector c (Playback)
resolution while being read from the memory
button
card or internal memory.
• Press the A button or the shutter-release
button to switch to shooting mode.
• When playing back pictures stored on the camera’s internal
15/11/2009 15:30
memory, C appears. When a memory card is inserted in
0004.JPG
the camera, C does not appear and images stored on the
memory card are played back.

4

Internal memory
indicator

Deleting Pictures

1

Press the l button to delete the
picture currently displayed in the
monitor.

2

Use the multi selector to select Yes and press
the k button.
• Deleted pictures cannot be recovered.
• To exit without deleting the picture, choose No and
press the k button.

26

4

Erase 1 image?

No
Yes

Step 4 Playing Back and Deleting Pictures

C

Options Available in Playback Mode

The following options are available in full-frame playback mode.
Option
Playback zoom

View thumbnails/apply
calendar display

Use
g (i)

f (h)
k

Change playback mode

c

A
52

50, 51
61
53, 56,
62

A
Switch to shooting mode

C

Press the A button or the shutter-release
button.

26

Pressing the c Button to Turn On the Camera

When the camera is off, holding down the c button will turn the camera on in playback mode. The
lens will not extend.

C

Basic Photography and Playback: Auto Mode

Add favorite pictures

Description
Rotate the zoom control to g to enlarge
the picture up to 10×.
Press the k button to return to full-frame
playback mode.
Rotate the zoom control to f to display
4, 9 or 16 picture thumbnails or to apply
the calendar display.
Add the picture currently displayed to
favorite pictures.
Press the c button to display the
playback-mode selection menu and
change to list by date, auto sort, or
favorite pictures mode.

Viewing Pictures

• Pictures stored in the internal memory can only be viewed if no memory card is inserted.
• Pictures that were shot using Face Priority (A 103) will be rotated automatically when displayed
in full-frame playback mode according to the orientation of the face (excluding pictures that were
shot using Continuous, BSS, and Multi-shot 16 (A 98)).
• When the monitor has turned off in standby mode to save power, press the c button or the
power switch to reactivate it (A 124).

C

Deleting the Last Picture Taken While in Shooting Mode

In shooting mode, press the l button to delete the last picture
taken.

Erase 1 image?

No
Yes

D

Deleting Multiple Pictures

Multiple pictures can be deleted from the Delete option (A 109) in the playback menu (A 106),
the list by date menu (A 55), the auto sort menu (A 58), or the favorite pictures menu (A 64).

27

Using the Flash
The flash has a range of 0.5-5.5 m (1 ft. 8 in.-18 ft.) when the camera is zoomed out all
the way. With maximum optical zoom applied, the range is 0.5-2.2 m (1 ft. 8 in.-7 ft.
3 in.) (when ISO sensitivity is set to Auto). The following flash modes are available.
U

Auto
Flash fires automatically when lighting is poor.

V

Auto with red-eye reduction
Reduce “red-eye” in portraits (A 29).

Basic Photography and Playback: Auto Mode

W

Off
Flash will not fire even when lighting is poor.

X

Fill flash
Flash fires whenever a picture is taken. Use to “fill-in” (illuminate) shadows and
backlit subjects.

Y

Slow sync
U (auto) is combined with slow shutter speed.
Flash illuminates main subject; slow shutter speeds are used to capture
background at night or under dim light.

Setting the Flash Mode

1

Press m (flash mode).
• The flash menu is displayed.

2

Use the multi selector H or I to choose the
desired mode and press the k button.
• The icon for the selected flash mode is displayed at the
top of the monitor.
• When U (auto) is applied, D is only displayed for
a few seconds, regardless of Photo info settings
(A 119).
• If a setting is not applied by pressing the k button
within a few seconds, the selection will be cancelled.

Flash mode

28
26

Using the Flash

B

Shooting When Lighting is Poor and the Flash is Disabled (W)

• Use of a tripod is recommended to stabilize the camera during shooting and avoid the effects of
camera shake.
• The E indicator is displayed when the camera automatically increases sensitivity. Pictures taken
when E is displayed may be slightly mottled.

B

Note on Using the Flash

Reflections from dust particles in the air may appear as bright spots in pictures. To reduce these
reflections, set the flash to W (off).

The Flash Lamp

The flash lamp indicates the flash status when the
shutter-release button is pressed halfway down.
• On: Flash will fire when picture is taken.
• Blinks: Flash charging. Wait a few seconds and try
again.
• Off: Flash will not fire when picture is taken.
If the battery is low, the monitor display will turn off, and remain off, until the flash is fully charged.

C

The Flash Setting

The default flash mode setting varies with shooting mode.
• A (auto): U (auto)
• Scene: varies with the selected scene mode (A 34-40)
• F (smart portrait): fixed at W (off) when On is selected for Blink proof, U (auto) when Off is
selected for Blink proof (A 49)
Flash cannot be used simultaneously with certain features (A 105).
The flash mode setting applied in A (auto) mode is stored in the camera’s memory even after the
camera is turned off, and reapplied the next time A (auto) mode is selected.

C

Basic Photography and Playback: Auto Mode

C

Red-eye Reduction

This camera uses advanced red-eye reduction (“In-Camera Red-Eye Fix”).
Pre-flashes are fired repeatedly at low intensity before the main flash, reducing the red-eye effect.
If the camera detects “red-eye” when a picture is taken, Nikon’s own In-Camera Red-Eye Fix
processes the image before it is recorded.
Note the following when taking pictures:
• Because pre-flashes are fired, there is a slight lag between when the shutter-release button is
pressed and when the picture is shot. This mode is not recommended when a quick shutter
response is required.
• The time required to save the picture increases slightly.
• Advanced red-eye reduction may not produce the desired results in some situations.
• In extremely rare instances, areas not subject to red-eye may be affected by advanced red-eye
reduction processing; in these cases, choose another mode and try again.

29

Taking Pictures with the Self-timer
The camera is equipped with a ten-second and two-second timer for self-portraits.
This feature is useful for reducing the effects of camera shake that occurs when
pressing the shutter-release button. When using the self-timer, use of a tripod is
recommended.

1

Press n (self-timer).
• The self-timer menu is displayed.

Basic Photography and Playback: Auto Mode

2

Use the multi selector H or I to choose 10 s
or 2 s and press the k button.
• 10 s (ten seconds):

Suited for important occasions
(such as weddings)
• 2 s (two seconds): Suited for preventing camera
shake
Self-timer
• The mode selected for self-timer is displayed.
• If a setting is not applied by pressing the k button within a few seconds, the
selection will be cancelled.

3

Frame the picture and press the
shutter-release button halfway.
• Focus and exposure will be set.

1/125 F2.7

4

Press the shutter-release button the
rest of the way down.
• The self-timer starts, and the number of
seconds remaining before the shutter is
released is displayed in the monitor. The selftimer lamp blinks while the timer is counting
down. About one second before the shutter
is released, the lamp remains lit and stops
blinking.
• When the shutter is released, the self-timer
will be set to k.
• To stop the timer before a picture is taken,
press the shutter-release button again.

30

1/125 F2.7

Macro Mode
Macro mode is used for taking pictures of objects as close as 3 cm (1.2 in.). Note
that the flash may be unable to light the entire subject at distances of less than
50 cm (1 ft. 8 in.).

1

Press p (macro mode).
• The macro menu is displayed.

Use the multi selector H or I to choose ON
and press the k button.
• The macro mode icon (F) is displayed.
• If a setting is not applied by pressing the k button
within a few seconds, the selection will be cancelled.
Macro mode

3

Rotate the zoom control to frame the picture.
• The closest distance at which the camera can focus
varies depending on the zoom position. At the zoom
position (wide angle position before the G icon)
where the F icon and zoom display glow green, the
camera can focus on subjects as close as 4 cm (1.6 in.)
from the lens. At the wide-most zoom position, the camera can focus on subjects as
close as 3 cm (1.2 in.) from the lens.

C

Basic Photography and Playback: Auto Mode

2

Autofocus

When using macro mode, the camera focuses continuously until focus is locked by pressing the
shutter-release button halfway. A sound will be heard while the camera focuses.

C

The Macro Mode Setting

The macro mode setting applied in A (auto) mode is stored in the camera’s memory even after the
camera is turned off, and reapplied the next time A (auto) mode is selected.

31

Exposure Compensation
Exposure compensation is used to alter exposure from the value suggested by the
camera to make pictures brighter or darker.

1

Press o (exposure compensation).
• The exposure compensation guide is displayed.

2
Basic Photography and Playback: Auto Mode

Use the multi selector H or I to choose the
desired setting and press the k button.
• When the picture is too dark: adjust the exposure
compensation to “+” side.
• When the picture is too bright: adjust the exposure
compensation to “–” side.
Exposure compensation
• Exposure compensation can be set to values between
-2.0 and +2.0 EV.
• If a setting is not applied by pressing the k button within a few seconds, the
selection will be cancelled.
• When set to any value other than 0.0, the value is displayed with the H icon in the
monitor.

3

Press the shutter-release button to take the
picture.
• To turn off exposure compensation, repeat from step 1
and set the value to 0.0, then press k.
11

C

Exposure Compensation Value

The exposure compensation value applied in A (auto) mode is stored in the camera’s memory even
after the camera is turned off, and reapplied the next time A (auto) mode is selected.

D

32

Using Exposure Compensation

• The camera tends to reduce exposure when the frame is dominated by brightly lit objects and to
increase exposure when the frame is mostly dark. Positive compensation may therefore be
required to capture the brilliancy of very bright objects that fill the frame (for example, sunlit
expanses of water, sand, or snow) or when the background is much brighter than the main
subject.
• Negative compensation may be called for when large areas of the frame contain very dark objects
(for example, a swath of dark green leaves) or when the background is much darker than the main
subject.

Shooting Suited for the Scene

Shooting in Scene Mode
Camera settings are automatically optimized for the selected subject type. The
following scene modes are available.
x Scene auto selector b Portrait

c Landscape

d Sports

e Night portrait

f Party/indoor

g Beach/snow

h Sunset

i Dusk/dawn

j Night landscape

k Close-up

u Food

l Museum

m Fireworks show n Copy

o Backlight

p Panorama assist

Choosing a Scene Mode

1

• The icon for the last scene mode selected
is displayed. The default setting is x
(Scene auto selector).

2

Press the multi selector K and press H, I, J,
or K to choose the desired scene, and then
press the k button.
• The screen changes to the shooting mode screen.
• See “Features” (A 34) for more information.

3

Scene auto selector

Shooting Suited for the Scene

Press the A button in shooting
mode to display the shooting-mode
selection menu, then press the
multi selector H or I to select a
scene icon.

Beach/snow

Frame the subject and shoot.

1/125 F2.7

D

Image Mode

When the d button is pressed to display the C (scene) menu, Image mode (A 94) can be
adjusted. Change made to this setting applies to all shooting modes (except for movie mode).

33

Shooting in Scene Mode

Features
The following icons are used for descriptions in this section: X = flash mode
(A 28), n = self-timer (A 30), p = macro mode (A 31), o = exposure
compensation (A 32).

Q

x Scene auto selector

By simply framing a picture, the camera automatically selects the optimum scene mode.
See “Shooting in the Scene Mode Selected by the Camera (Scene Auto Selector)” (A 41)
for more information.
m
1

Shooting Suited for the Scene

2
3

U1

n

Off2

p

Off3

o

0.02

The camera automatically selects the optimum flash mode setting for the scene mode it
has selected. Can be changed to W (off).
Other settings can be selected.
Changed to On when the camera selects Close-up scene mode.
b Portrait
Use this mode for taking portraits in which the main subject
stands out clearly.
• If the camera detects a face, it focuses on the face. See “Face
Priority” (A 103) for more information.
• If more than one face is recognized, focus will be on the face
nearest to the camera.
• The skin softening feature can make the subject’s (up to
three people) skin appear smoother, then record the image
(A 48).
• If no faces are recognized, focus will be on the center of the
screen.
• Digital zoom is not available.
m

V*

n

Off*

p

Off

o

0.0*

Off

o

0.0*

* Other settings can be selected.
c Landscape
Use this mode for vivid landscapes and cityscapes.
• The camera focuses at infinity. The focus area or focus
indicator (A 6) always glows green when the shutterrelease button is pressed halfway. Note, however, that
objects in the foreground may not always be in focus.
• AF-assist illuminator (A 123) does not light.
m

W

n

Off*

p

* Other settings can be selected.

34

Q: Indicates pictures shot in this scene mode are processed automatically to reduce noise, and
therefore may take more time to save.

Shooting in Scene Mode

m

W

n

Off

p

Off

o

0.0*

o

0.02

* Other settings can be selected.

OQ

e Night portrait

Use this mode for portraits of a human subject shot in front of
background lighting at night. Flash is used to illuminate the
subject while maintaining the mood of the background.
• If the camera detects a face, it focuses on the face. See “Face
Priority” (A 103) for more information.
• If more than one face is recognized, focus will be on the face
nearest to the camera.
• The skin softening feature can make the subject’s (up to three
people) skin appear smoother, then record the image
(A 48).
• If no faces are recognized, focus will be on the center of the
screen.
• Digital zoom is not available.
m
1
2

V1

n

Off2

p

Off

Shooting Suited for the Scene

d Sports
Use this mode for dynamic action shots that freeze the action
in a single shot and record motion in a series of pictures.
• The camera focuses on the subject in the center of the
frame. The camera focuses continuously until focus is
locked by pressing the shutter-release button halfway.
• While the shutter-release button is held down, the camera
shoots up to 5 pictures at a rate of up to about 0.9 frames per second (fps) (when image
mode is set to I Normal (4000)).
• Focus, exposure compensation, and white balance are fixed at the values determined
with the first shot in each series.
• AF-assist illuminator (A 123) does not light.
• The maximum frame rate with continuous shooting may vary depending upon the
current image mode setting and the memory card used.

Fill flash with slow sync and red-eye reduction.
Other settings can be selected.

O: For those scene modes with O, use of a tripod is recommended.
Q: Indicates pictures shot in this scene mode are processed automatically to reduce noise, and
therefore may take more time to save.

35

Shooting in Scene Mode
f Party/indoor
Suitable for taking pictures in parties. Captures the effects of
candlelight and other indoor background lighting.
• The camera focuses on the subject in the center of the
frame.
• As pictures are easily affected by camera shake, hold the
camera steadily. Use of a tripod is recommended for dark
locations.
m
1
2

V1

n

Off2

p

Off

o

0.02

The flash may change to slow sync with red-eye reduction. Other settings can be selected.
Other settings can be selected.

Shooting Suited for the Scene

g Beach/snow
Captures the brightness of such subjects as snowfields,
beaches, or sunlit expanses of water.
• The camera focuses on the subject in the center of the
frame.

m

U*

n

Off*

p

Off*

o

0.0*

o

0.0*

* Other settings can be selected.

O

h Sunset
Preserves the deep hues seen in sunsets and sunrises.
• The camera focuses on the subject in the center of the
frame.

m

W*

n

Off*

p

Off

* Other settings can be selected.

36

O: For those scene modes with O, use of a tripod is recommended.

Shooting in Scene Mode

OQ

i Dusk/dawn

Preserves the colors seen in the weak natural light before
sunrise or after sunset.
• The camera focuses at infinity. The focus area or focus
indicator (A 6) always glows green when the shutterrelease button is pressed halfway. Note, however, that
objects in the foreground may not always be in focus.
• AF-assist illuminator (A 123) does not light.
m

W

n

Off*

p

Off

o

0.0*

o

0.0*

* Other settings can be selected.

Slow shutter speeds are used to produce stunning night
landscapes.
• The camera focuses at infinity. The focus area or focus
indicator (A 6) always glows green when the shutterrelease button is pressed halfway. Note, however, that
objects in the foreground may not always be in focus.
• AF-assist illuminator (A 123) does not light.
m

W

n

Off*

p

Off

* Other settings can be selected.

O: For those scene modes with O, use of a tripod is recommended.
Q: Indicates pictures shot in this scene mode are processed automatically to reduce noise, and
therefore may take more time to save.

Shooting Suited for the Scene

OQ

j Night landscape

37

Shooting in Scene Mode
k Close-up

Shooting Suited for the Scene

Use to photograph flowers, insects and other small objects at
close range.
• Macro mode (A 31) will be turned on and the camera
automatically zooms to the position at the closest distance
at which the camera can focus.
• The closest distance at which the camera can focus varies
depending on the zoom position. At the zoom position (wide angle position before the
K icon) where the F icon and zoom display glows green, the camera can focus on
subjects as close as 4 cm (1.6 in.) from the lens. At the wide-most zoom position, the
camera can focus on subjects as close as 3 cm (1.2 in.) from the lens.
• AF area mode is set to Manual (A 101). Press the k button to choose the focus area
in which focus is acquired.
• The camera focuses continuously until focus is locked by pressing the shutter-release
button halfway.
m

W

n

Off*

p

On

o

0.0*

* Other settings can be selected. Note that the flash may be unable to light entire subject at
distances of less than 50 cm (1 ft. 8 in.).
u Food
Use this mode when taking pictures of food. See “Taking
Pictures in Food Mode” (A 43) for details.
• AF area mode is set to Manual (A 101). Press the k
button to choose the focus area in which focus is acquired.

X

W

n

Off*

p

On

o

0.0*

o

0.0*

* Other settings can be selected.
l Museum
Use indoors where flash photography is prohibited (for
example, in museums and art galleries) or in other settings in
which you do not want to use the flash.
• The camera focuses on the subject in the center of the
frame.
• BSS (best shot selector) is used when shooting (A 98).
• AF-assist illuminator (A 123) does not light.
• Pictures are easily affected by camera shake; hold the
camera steadily.
m

W

n

* Other settings can be selected.

38

Off*

p

Off*

Shooting in Scene Mode

O

m Fireworks show

Slow shutter speeds are used to capture the expanding burst
of light from fireworks.
• The camera focuses at infinity. The focus indicator (A 6)
always glows green when the shutter-release button is
pressed halfway. Note, however, that objects in the
foreground may not always be in focus.
• AF-assist illuminator (A 123) does not light.
m

W

n

Off

p

Off

o

0.0

o

0.0*

o

0.0*

n Copy

m

W*

n

Off*

p

Off*

* Other settings can be selected.
o Backlight

Shooting Suited for the Scene

Provides clear pictures of text or drawings on a white board or
in print.
• The camera focuses on the subject in the center of the
frame.
• Use macro mode (A 31) to focus at short ranges.
• Colored text and drawings may not show up well.

Use when light is coming from behind the subject, throwing
features or details in shadow. The flash fires automatically to
“fill in” (illuminate) shadows.
• The camera focuses on the subject in the center of the
frame.

m

m

n

Off*

p

Off

* Other settings can be selected.

O: For those scene modes with O, use of a tripod is recommended.

39

Shooting in Scene Mode
p Panorama assist

Use to take a series of pictures that will later be joined to form a single panorama using the
supplied Panorama Maker software. See “Taking Pictures for a Panorama” (A 45) for details.
m

W*

n

* Other settings can be selected.
Shooting Suited for the Scene

40

Off*

p

Off*

o

0.0*

Shooting in Scene Mode

Shooting in the Scene Mode Selected by the Camera
(Scene Auto Selector)
By simply framing a picture, the camera automatically selects the optimum scene
mode for simpler shooting.
When the camera is aimed at a subject in x scene auto selector mode, the
camera automatically selects one of the following scene modes.
•
•
•
•

• Portrait (A 34)
• Night portrait (A 35)
• Close-up (A 38)

Press the A button in shooting
mode to display the shooting-mode
selection menu and use the multi
selector to select x (Scene auto
selector) (A 33).
• The camera enters scene auto selector
scene mode.

2

Scene auto selector

Shooting Suited for the Scene

1

Auto (typical photography)
Landscape (A 34)
Night landscape (A 37)
Backlight (A 39)

Frame the subject and take the picture.
• When the camera automatically selects a scene mode,
the shooting mode icon changes to that for the scene
mode currently enabled.
d: Auto
g: Night landscape
e: Portrait
i: Close-up
11
f: Landscape
j: Backlight
h: Night portrait
• Press the shutter-release button halfway to set focus and exposure. When the subject
is in focus, the active focus area glows green.
• Press the shutter-release button the rest of the way down to take the picture.

41

Shooting in Scene Mode

B

Note on Scene Auto Selector Scene Mode

Depending upon shooting conditions, the camera may not select the desired scene mode. Should
this occur, switch to A (auto) mode (A 20) or choose the desired scene mode manually (A 33).

C

Focusing When Using Scene Auto Selector Mode

• When using scene auto selector mode, if the camera detects a face, it focuses on the face (Face
Priority ➝ A 103).
• When the shooting mode icon is d or i (Close-up), just as when AF area mode (A 101) is
set to Auto, the camera automatically selects the focus area (one of nine) containing the subject
closest to the camera.

C
Shooting Suited for the Scene

42

Flash Mode in Scene Auto Selector Scene Mode

U (Auto) (default setting) and W (Off) flash mode settings can be applied (A 28).
• When U (Auto) is applied, the camera automatically selects the optimum flash mode setting
for the scene mode it has selected.
• When W (Off) is applied, the flash does not fire, regardless of shooting conditions.

C

Functions Restricted in Scene Auto Selector Scene Mode

• Digital zoom is not available.
• The macro mode button on the multi selector (A 9, 31) is disabled.

Shooting in Scene Mode

Taking Pictures in Food Mode
Use this mode when taking pictures of food.

1

Press the A button in shooting
mode to display the shooting-mode
selection menu and use the multi
selector to select u (Food) (A 33).
• Macro mode (A 31) will be turned on
and the camera automatically zooms to
the position at the closest distance at
which the camera can focus.

Press the multi selector H or I to choose
white balance.
• Press H to increase the amount of red, or I to increase
the amount of blue.
11

3

Frame the picture.
• The closest distance at which the camera can focus
varies depending on the zoom position. At the zoom
position (wide angle position before the G icon)
where the F icon and zoom display glow green, the
camera can focus on subjects as close as 4 cm (1.6 in.)
from the lens. At the wide-most zoom position, the
camera can focus on subjects as close as 3 cm (1.2 in.)
from the lens.

Shooting Suited for the Scene

2

Food

11

• AF area mode is set to Manual (A 101). Press the k
button to move the focus area. Press the multi selector
H, I, J, or K to select a focus area and press the k
button again to activate the selected focus area.
• Self-timer (A 30) and exposure compensation
(A 32) settings can be adjusted while the focus area is
locked.

43

Shooting in Scene Mode

4

Press the shutter-release button to
take the picture.
• Focus is locked when the shutter-release
button is pressed halfway, and a picture is
taken when the shutter-release button is
pressed the rest of the way down.
1/125 F2.7
• When the camera is unable to focus, the
focus area blinks red. Change the composition and press the shutter-release button
halfway again.

Shooting Suited for the Scene

B

Note on Food Mode

Flash mode is disabled. Macro mode setting (A 31) is fixed at ON.

C

44

White Balance Setting in Food Mode

• Increasing the amount of red or blue will decrease illumination effects.
• Changing white balance in food mode will not affect white balance in the shooting menu (A 96).
• The white balance setting applied in food mode is stored in the camera’s memory even after the
camera is turned off, and reapplied the next time food mode is selected.

Shooting in Scene Mode

Taking Pictures for a Panorama
The camera focuses on the subject in the center of the frame. Use a tripod for the
best results.

1

Press the A button in shooting
mode to display the shooting-mode
selection menu and use the multi
selector to select p (Panorama
assist) (A 33).

2

Panorama assist

Use the multi selector to choose the direction
and press the k button.
• Select how pictures will be joined together in the
completed panorama; right (I), left (J), up (K) or
down (L).
• The yellow panorama direction icon (I I) will move to
11
the direction pressed and press the k button to
choose the direction. A white panorama direction icon (I) will be displayed in the
chosen direction.
• Apply flash mode (A 28), self-timer (A 30), macro mode (A 31) and exposure
compensation (A 32) settings with this step, if necessary.
• Press the k button again to reselect the direction.

3

Shooting Suited for the Scene

• Panorama direction icons (I) are displayed
to show the direction in which pictures
will be joined.

Take the first picture.
• One third of the last picture taken will be
displayed partially transparent.

11

4

Take the next picture.
• Compose the next picture so that one-third
of the frame overlaps the previous picture.
• Repeat until you have taken the necessary
number of pictures to complete the scene.
End

10

45

Shooting in Scene Mode

5

Press the k button when shooting is
complete.
• The camera returns to step 2.

End

Shooting Suited for the Scene

B

7

Panorama Assist

• Set flash mode, self-timer, macro mode and exposure compensation before taking the first picture.
They cannot be changed after the first picture is taken. Pictures cannot be deleted, nor can zoom
or Image mode setting (A 94) be adjusted after the first picture is taken.
• Shooting for the panorama series is terminated if the auto off function (A 124) initiates standby
mode during shooting. Setting the time allowed to elapse before the auto off function is enabled
to a longer setting is recommended.

D

R Indicator

When using panorama assist mode, all pictures in the panorama have
the same exposure, white balance, and focus as the first picture of the
panorama. When the first picture is shot, R is displayed to
indicate that exposure, white balance, and focus are locked.

End

D

Panorama Maker

Install Panorama Maker from the supplied Software Suite CD. Transfer pictures to a computer
(A 80) and use Panorama Maker (A 83) to join them in a single panorama.

D
46

More Information

See “File and Folder Names” (A 132) for more information.

10

Taking Pictures of Smiling Faces (Smart Portrait Mode)

Using Smart Portrait Mode
At the default setting, the camera detects smiling faces using face priority and
releases the shutter automatically (smile timer function). The skin softening
function makes the subject's skin appear smoother.

1

Enter smart portrait mode by
pressing the A button in shooting
mode and selecting F (press the
multi selector H or I), and then
pressing the k button.

Smart portrait

• Smart portrait mode is selected.

2

Frame a picture.

3

The shutter is automatically released.
• If the camera detects that the face framed by the double border is smiling, the Smile
timer function (A 48) automatically releases the shutter.
• The self-timer lamp (A 4) blinks when the camera detects a face, and it flickers
immediately after the shutter is released. Each time the shutter is released, the camera
repeats automatic shooting by face priority and smile detection.
• The shutter can also be released by pressing the shutter-release button. If no face is
detected, the camera focuses on the subject in center of frame.
• When the shutter is released, the camera makes the subject’s skin appear smoother,
then records the image (Skin softening (A 48)).

4

Taking Pictures of Smiling Faces (Smart Portrait Mode)

• Point the camera at the subject.
• When the camera detects a face, the focus area
containing the face will be displayed with a yellow
double border, and when focus is locked the double
border will turn green for a moment.
1/250 F2.7
• Up to three faces can be detected. When the camera
detects more than one face, the face closest to the center of the frame is framed by a
double border and the others by single borders.

Finish shooting.
• To finish automatic shooting of smiling faces, either turn the camera off, set Smile
timer to Off, or press the A button and select another shooting mode.

47

Using Smart Portrait Mode

B

Face Priority and Smiling Face Detection Features

• Under some shooting conditions, faces and smiling faces may not be detected properly.
• See “Notes on Face priority” (A 104) for more information.

C

Auto Power Off When Using Smile Timer (Standby Mode)

When Smile timer is set to On, the auto off function (A 124) will turn the camera off in the
following situations if no operations are performed.
• The camera does not recognize any faces
• The camera recognized the face but cannot detect a smiling face

C

Functions Available in Smart Portrait Mode

Taking Pictures of Smiling Faces (Smart Portrait Mode)

• Flash cannot be used when Blink proof is set to On. When Blink proof is set to Off, flash mode
(A 28) changes to U (auto) (other settings can be selected).
• Exposure compensation (A 32) can be adjusted.
• If Smile timer and Blink proof are both set to Off, self-timer (A 30) can be set.
• Macro mode cannot be used.
• Digital zoom is not available.
• Press the d button to display the F (smart portrait) menu and change the settings for Image
mode, Skin softening, Smile timer, or Blink proof.

D

More Information

See “Autofocus” (A 25) for more information.

Smart portrait menu
The smart portrait menu contains the following options.
Press the d button in smart portrait mode to display the smart portrait menu
and use the multi selector to modify and apply settings.
Image mode
Allows you to set Image mode (A 94).
Changes made to the image mode setting apply to all shooting modes (except
movie mode).
Skin softening

48

Set skin softening. When the shutter is released, the camera detects up to 3 faces
and processes the image to make the faces appear smoother, then records the
image. The effect of this feature can be set to High, Normal (default setting), and
Low. When Off is selected, skin softening is turned off.
• When skin softening is enabled, the icon for the current setting is displayed in the
monitor during shooting (A 6). When Off is selected, an icon for the current
setting is not displayed. Additionally, the effects of the current skin softening
setting cannot be previewed in the monitor while shooting. To confirm, view the
pictures after shooting.

Using Smart Portrait Mode
Smile timer
• On (default setting): Among the detected faces, if a smile is detected in the face
that is framed by a double border, the camera automatically releases the shutter.
• Off: The camera does not release the shutter automatically using smile timer; the
shutter is only released when the shutter-release button is pressed.
• When smile timer is enabled, the current setting is displayed during shooting
(A 6). When Off is selected, an icon for the current setting is not displayed.
Blink proof

B

Taking Pictures of Smiling Faces (Smart Portrait Mode)

When set to On, the shutter is released two times each time a picture is taken; the
camera chooses one image in which the subjects’ eyes are open, and saves it.
• The message on the right will be displayed for a
few seconds when the camera records an image in
which someone may have been blinking.
A blink was detected in the
• When set to On, the flash cannot be used.
picture just taken.
• The default setting is Off.
• When blink proof is enabled, the current setting is
displayed during shooting (A 6). When Off is
selected, an icon for the current setting is not
displayed.

Notes on Skin Softening

• When taking pictures with skin softening, the time required to save the pictures increases slightly.
• Depending on shooting conditions, even if the camera detects a face on the monitor at the time
of shooting, effects of the skin softening function may not be visible, and areas other than the face
may be processed. If the desired effect is not achieved, set Skin softening to Off and shoot again.
• The amount of skin softening effect that is applied cannot be set while using the portrait or night
portrait scene modes.
• Skin softening can also be applied to pictures after they have been taken (A 72).

49

More on Playback/In-Camera Editing

Viewing Multiple Pictures: Thumbnail Playback
Rotate the zoom control to f (h) in full-frame
playback mode (A 26) to display pictures in “contact
sheets” of thumbnail images.

1/ 10

The following operations are available while thumbnails are displayed.
To

Use

More on Playback/In-Camera Editing

Choose pictures

Press the multi selector H, I, J, or K.

9

Increase the
number of
pictures
displayed/apply
the calendar
display

f (h)

Rotate the zoom control to f (h) to increase
the number of picture thumbnails displayed: 4
➝ 9 ➝ 16. Rotate the zoom control to f (h)
in the 16-picture thumbnail display to apply the
calendar display (A 51), and pictures can be
found by the date on which they were taken.
Rotate the zoom control to g (i) to return to
thumbnail display.

–

g (i)

Rotate the zoom control to g (i) to decrease
the number of picture thumbnails displayed: 16
➝ 9 ➝ 4. Rotate to g (i) in 4-picture thumbnail
display to return to full-frame playback mode.

–

Press the k button.

26

Press the A button or the shutter-release
button.

26

Decrease the
number of
pictures
displayed
Cancel thumbnail
playback

k
A

Switch to
shooting mode

C

Thumbnail Playback Mode Display
Print set icon

When pictures for which Print set (A 90) and
Protect (A 109) settings have been configured
are selected, the icons in the illustration to the
right appear.
Movies are displayed as film frames.

50

A

Description

1/ 10

Film frames

Protect icon

Viewing Multiple Pictures: Thumbnail Playback

C

Thumbnail Display in Auto Sort and Favorite
Pictures Mode

• When thumbnails are displayed in auto sort mode (A 56), the
category icon of the pictures will appear at the right top of the
screen.
• When thumbnails are displayed in favorite pictures mode (A 59),
the favorite pictures icon will appear at the right top of the screen.

1/ 3

Calendar Display
Rotate the zoom control to f (h) when the pictures
are displayed in 16-thumbnail (A 50) in playback mode
to switch to calendar display.
Selecting a date displays the first picture taken on that
date in full-frame playback mode. The dates on which
the pictures were taken are underlined in yellow.
The following operations are available in calendar display.
Use

Select a date

Return to fullframe playback
Return to
thumbnail display

B

k
g (i)

A

Description

Press the multi selector H, I, J, or K.

9

The first picture taken on the selected date is
displayed full frame.

26

Rotate the zoom control to g (i).

50

More on Playback/In-Camera Editing

To

18

Notes on Calendar Display

• Pictures taken before the date and time have been set are recognized as having been taken on 01/
01/2009 in the calendar display.
• The l button and d button are not available in calendar display.

D

List by Date Mode

Only the pictures taken on the same date can be played back in list by date mode (A 53). The
playback menu operations (A 55) are also available only for the pictures taken on the selected
dates.

51

Taking a Closer Look: Playback Zoom
Rotating the zoom control to g (i) during full-frame
playback mode (A 26) zooms the current picture, with
the center of the picture displayed in the monitor.
The guide at lower right shows which portion of the
picture is enlarged.
The following operations are available while pictures
are zoomed in.
To
Zoom in

Zoom out

Use
g (i)

f (h)

View other areas
of picture
More on Playback/In-Camera Editing

52

Switch to fullframe playback
Crop picture

k
d

A

Description
Zoom increases each time the zoom control is
rotated to g (i), to a maximum of 10×.

–

Zoom decreases each time the zoom control is
rotated to f (h). When the magnification ratio
–
reaches 1×, the display returns to full-frame
playback mode.
Press the multi selector H, I, J, or K to move
the display area to other areas of the picture.

9

Press the k button.

26

Press the d button to crop current picture to
contain only the portion visible in the monitor.

74

Press the A button or the shutter-release
button.

26

A
Switch to
shooting mode

Pictures Taken in Face Priority
When zooming in (playback zoom) on a picture taken
using the face priority function (A 103) by rotating the
zoom control to g (i), the picture will be enlarged so
that the face detected at the time of shooting is in the
center of the monitor (excluding pictures that were shot
using Continuous, BSS and Multi-shot 16 (A 98)).
• If more than one face was detected, the picture will
be enlarged with the face on which focus was acquired at the center of the
monitor. Press the multi selector H, I, J, or K to display other faces that were
detected.
• When the zoom control is rotated to g (i) or f (h) to adjust the zoom ratio,
the center of the picture (normal playback zoom display), rather than the face, is
displayed at the center of the monitor.

Viewing Pictures by Date (List by Date Mode)
In the C list by date mode, you can playback only the images taken on the same
date. In full-frame playback mode, just as with the normal playback mode, pictures
can be viewed as thumbnails, picture displays can be enlarged, pictures can be
edited, and movies can be played back.
By pressing the d button to display the “List by Date Menu” (A 55), you can
delete all pictures with the same date, view a slide show of pictures with the same
date, and set print set or protect for all pictures with the same date.

Selecting a Date in List by Date Mode

1

Press the c button in playback
mode to display the playback-mode
selection menu and press the multi
selector H or I to choose C, and
then press the k button.

List by date

• Dates for which pictures exist will be listed.

Select the desired date.
• The camera lists up to 29 dates. If pictures exist for
more than 29 dates, all pictures recorded earlier than
most recent 29 dates will be listed together as Others.

List by date

15/11/2009

3

10/11/2009

2
40

Others

• When the k button is pressed, the first picture taken
on the selected date will be displayed full-frame.
• Select images and press the k button to sort the
displayed images to the favorites folder (A 61).
• Rotate the zoom control to f (h) in full-frame
playback mode to return to the list by date screen.

B

More on Playback/In-Camera Editing

2

15/11/2009 15:30
0003.JPG

3

3

Notes on List by Date Mode

• Up to 9,000 pictures can be displayed in list by date mode. If more pictures exist, “*” is displayed
next to the number.
• Pictures taken before the date and time have been set are recognized as having been taken on 01/
01/2009.

53

Viewing Pictures by Date (List by Date Mode)

Using List by Date Mode
The following operations are available in the list by date screen.
To

Use

Press the multi selector H or I to select a date.

Select date

More on Playback/In-Camera Editing

54

Switch to fullframe playback

k

Delete picture

l

View list by date
menu
Change playback
mode

d
c

A

Description

Press the k button to display the first picture
taken on the selected date.
Rotate the zoom control to f (h) in full-frame
playback mode to return to the list by date
screen.
Press the l button to delete all pictures taken on
the selected date. Choose Yes on the
confirmation dialog to be displayed.
Press the d button to display the list by date
menu.
Press the c button to display the playbackmode selection menu.

9

26

26
55
8

A
Switch to
shooting mode

Press the A button or the shutter-release button. 26

Viewing Pictures by Date (List by Date Mode)

List by Date Menu
Press the d button in list by date mode to perform the following operations on
the pictures taken on the specified date.
Quick retouch*
➝A 70
D-Lighting*
➝A 71
Skin softening*
➝A 72
Print set
➝A 90
Slide show
➝A 108
Delete
➝A 109
Protect
➝A 109
Rotate image*
➝A 110
Small picture*
➝A 73
Voice memo*
➝A 66
* During full-frame playback only
More on Playback/In-Camera Editing

When the d button is pressed in the list by date screen (A 53), options can be
applied to all pictures taken on the same date, or all pictures taken on the same
date can be deleted. To apply options to individual pictures, or to select individual
pictures for deletion, display a picture full-frame and press the d button.

55

Image Searching in Auto Sort Mode
Pictures and movies will automatically be sorted in any of the following folders
during shooting. If F auto sort mode is selected, pictures and movies can be
viewed by selecting the folder to which they were sorted with shooting.
a Smile

Y Portraits

u Food

U Landscape

V Dusk to dawn

D Close-ups

D Movie

X Retouched copies

W Other scenes

In full-frame playback mode, just as with the normal playback mode, thumbnail
playback mode and calendar playback mode can be displayed, picture displays
can be enlarged, pictures can be edited, and movies can be played back. Pictures
can also be sorted into folders. By pressing the d button to display the “Auto
Sort Menu” (A 58), you can delete all pictures in the same folder, view a slide
show of pictures in the same folder, and set print set or protect for all pictures in
the same folder.

Displaying Pictures in Auto Sort Mode
More on Playback/In-Camera Editing

1

Press the c button in playback
mode to display the playback-mode
selection menu and press the multi
selector H or I to choose F, and
then press the k button.
A list of categories appears.

2

Choose an auto sort category.

Portraits

• See “Categories and the Contents” (A 57) for more
information about auto sort categories.

• Press k to display pictures in the selected folder in
full-frame playback mode.
• The icon of the category currently played back will be
displayed in the top right of the screen.
• Select images and press the k button to sort the
displayed images to the favorites folder (A 61).

56

Auto sort

15/11/2009 15:30
0004.JPG

1

4

Image Searching in Auto Sort Mode

Categories and the Contents
Folder name
a Smile

Y Portraits

U Landscape
V Dusk to dawn
D Close-ups

* The pictures taken in Scene auto selector scene mode (A 41) are included.

B

More on Playback/In-Camera Editing

u Food
D Movie
X Retouched copies
W Other scenes

Description
Pictures taken in smart portrait mode (A 47) while smile timer
was set to On.
Pictures taken in A (auto) mode (A 20) using face priority
(A 103).
Pictures taken in Portrait*, Night portrait*, Party/indoor, and
Backlight* scene mode (A 33).
Pictures taken in smart portrait mode (A 47) while smile timer
was set to Off.
Pictures taken in Landscape* scene mode (A 33).
Pictures taken in Night landscape*, Sunset, Dusk/dawn or
Fireworks show scene mode (A 33).
Pictures taken in A (auto) mode using macro (A 31).
Pictures taken in Close-up* scene mode (A 33).
Pictures taken in Food (A 43) scene mode (A 33).
Movies recorded in movie mode (A 75).
Edited pictures (A 68).
All pictures that are not included in the other folders.

Notes on Auto Sort Mode

• Up to 999 pictures and movie files can be added to each folder in auto sort mode. If the desired
folder already contains 999 pictures, new pictures or movies cannot be added or displayed in auto
sort mode. Display pictures and movies that could not be added to a folder in normal playback
mode (A 26) or list by date mode (A 53).
• Pictures or movies copied from the internal memory or the memory card (A 110) cannot be
displayed in auto sort mode.
• Pictures or movies recorded by a camera other than the COOLPIX S570 cannot be displayed in
auto sort mode.

57

Image Searching in Auto Sort Mode

Using Auto Sort Mode
The following operations are available in the category list screen.
To

Use

A

Description
Press the multi selector H, I, J, or K to
select the folder.

9

k

Press the k button to display the first picture
in the selected folder.

26

Delete picture

l

Press the l button after selecting a category,
and a confirmation dialogue will be displayed.
Choose Yes and press the k button to delete
all pictures sorted to that category.

26

Change playback
mode

c

Press the c button to display the playbackmode selection menu.

8

Press the A button or the shutter-release
button.

26

Select the folder
name
Switch to full-frame
playback

A
More on Playback/In-Camera Editing

58

Switch to shooting
mode

Auto Sort Menu
Press the d button in full-frame playback mode or thumbnail display mode of
auto sort mode to display the following menus.
Quick retouch
D-Lighting
Skin softening
Print set
Slide show
Delete
Protect
Rotate image
Small picture
Voice memo

➝A 70
➝A 71
➝A 72
➝A 90
➝A 108
➝A 109
➝A 109
➝A 110
➝A 73
➝A 66

Sorting Favorite Pictures (Favorite Pictures Mode)
Pictures can be added to the favorites folder sorted by each event such as travel or
wedding. Once pictures are added to the favorites folder, only pictures in the
selected folder can be played back. One picture can be added to multiple folders.

Sorting/Playback Procedure
Preparing favorites folder (A 60)

Playing back the pictures
(Play back the desired pictures to add in playback mode (A 26),
list by date mode (A 53), or auto sort mode (A 56))

Viewing the pictures in favorites folder (A 62)

More on Playback/In-Camera Editing

Sorting pictures to favorites folder (A 61)

59

Sorting Favorite Pictures (Favorite Pictures Mode)

Preparing Favorites Folder (setting icons)
Changing the display icons for favorites folders enables you to see which pictures
have been added to a favorites folder. The icons can be changed again after
adding the pictures to the folders.

1

Press the c button in playback
mode to display the playback-mode
selection menu and press the multi
selector H or I to choose h, and
then press the k button.

Favorite pictures

• A list of favorite folders is displayed.

2

Choose the favorites folder and
press the d button.

Favorite pictures

• Icon selection screen is displayed.

More on Playback/In-Camera Editing

Choose icon

3

Use the multi selector J or K to choose an
icon color and press the k button.

Choose icon

Back

4

Use H, I, J, or K to choose an icon and
press the k button.

Choose icon

• The icon will be changed and the monitor display will
return to the list of favorite folders screen.
Back

B

60

Icons for Favorites Folder

• Choose icons for favorites folders separately for the internal memory and for every memory card
used.
• Remove the memory card from the camera to change favorites folder icons for the internal memory.
• When favorite pictures stored to the internal memory, or a memory card, are played back without
an icon having been selected, icons are displayed as numbers (default setting).

Sorting Favorite Pictures (Favorite Pictures Mode)

Sorting Pictures to a Favorites Folder
Pictures can be added to favorites folders and sorted. Adding the pictures enables
easier and faster searching.

1

Playback the pictures in playback mode (A 26), list by date mode
(A 53), or auto sort mode (A 56).

2

Select your favorite picture and press the k
button.

15/11/2009 15:30
0004.JPG

• Select full-frame playback mode and press the k
button.
• The favorites folders selection screen is displayed.
4

3

Use the multi selector to choose the favorites
folder you want to add the picture to and
press the k button.

4

Favorite pictures

Back

B

Add

More on Playback/In-Camera Editing

• The pictures are added to the selected favorites folder.

Notes on Adding Favorite Pictures

• A favorites folder can contain up to 200 pictures.
• If the selected picture has been already added to the favorites folder, the checkbox on the
selected folder will have the On mark (w).
• One picture can be added to multiple favorite folders.
• When pictures are added to a favorites folder, they are not physically copied to a favorites folder
(A 132) or moved from the folder to which they were originally recorded (A 65).
• Movies cannot be added to favorites folders.

D

More information

See “Removing Pictures from Favorites” (A 62) for more information.

61

Sorting Favorite Pictures (Favorite Pictures Mode)

Viewing the Pictures in Favorites Folder
In h Favorite pictures playback mode, the Favorites folder with the pictures can be
chosen and displayed. In full-frame playback mode, just as with the normal playback
mode, thumbnail playback mode and calendar playback mode can be displayed, picture
displays can be enlarged, pictures can be edited, and movies can be played back. By
pressing d in full-frame playback mode or thumbnail display mode, you can display
the Favorite pictures playback menu (A 64), from which you can select pictures taken
on a specified day to view as a slide show, set for printing or protection, etc.

1

Press the c button in playback
mode to display the playback-mode
selection menu, press the multi
selector H or I to choose h, and
press the k button.

Favorite pictures

• A list of favorites folders is displayed.

2

Choose a Favorite folder.

Favorite pictures

More on Playback/In-Camera Editing

Choose icon

• Press k to display pictures in the selected folder in
full-frame playback mode.
• The icon of the favorites folder currently played back
will be displayed on the top right of the screen.

15/11/2009 15:30
0004.JPG

4

4

Removing Pictures from Favorites
To remove pictures from a favorites folder without
deleting the pictures, use the procedure below.
Press the k button in the full-frame display in step 2
above and the removing favorites screen will be displayed.
Choose Yes and press the k button to remove the
picture. To cancel, choose No.

B
62

Remove this picture from
favorites?

No
Yes

Notes on Deleting

Deleting a picture during favorite pictures playback will delete the original file that has been
registered to the favorites folder (A 65).

Sorting Favorite Pictures (Favorite Pictures Mode)

Using Favorite Pictures Mode
The following operations are available in the favorites folders list screen.
To

Use

Select favorites
folder

Description

Press the multi selector H, I, J, or K.

A

9

Switch to full-frame
playback

k

Press the k button to display the first picture in
26
the favorites folder.

Delete picture

l

All pictures that are registered to the selected
folder are deleted. Choose Yes and press the k
26
button to delete all pictures sorted to that
favorites folder.

d

Change the icon for favorites folder.

60

Change playback
mode

c

Press the c button to display the playbackmode selection menu.

8

Press the A button or the shutter-release
button.

26

A
Switch to shooting
mode

More on Playback/In-Camera Editing

Change the icon for
favorites folder

63

Sorting Favorite Pictures (Favorite Pictures Mode)

Favorite Pictures Menu
Press the d button in full-frame playback mode or thumbnail display mode in
favorite picture playback mode to display the following menus.
Quick retouch
D-Lighting
Skin softening
Print set
Slide show
Delete
Protect
Rotate image
Small picture
Voice memo
More on Playback/In-Camera Editing

64

➝A 70
➝A 71
➝A 72
➝A 90
➝A 108
➝A 109
➝A 109
➝A 110
➝A 73
➝A 66

Sorting Favorite Pictures (Favorite Pictures Mode)

C

Adding/Viewing Favorite Pictures

When pictures are added to a favorites folder, they are not physically copied to a favorites folder or
moved from the folder to which they were originally recorded (A 132). Only the file names of
pictures are added to favorites folders. In favorite pictures mode, pictures with file names that have
been added to the favorites folder are played back.
Deleting a picture during favorite pictures playback (A 26, 63, 109) will delete the original file that
has been registered to the favorites folder.

Adding to Favorites
Favorites Folder 1

Internal memory and memory card
0001.JPG

0002.JPG

0001.JPG

Adds a file name

0002.JPG
0003.JPG

0003.JPG

0004.JPG

Favorites Folder 2
0001.JPG
0004.JPG

Favorites Picture Playback
0001.JPG

More on Playback/In-Camera Editing

Adds a file name

Favorites Folder 1
0002.JPG
0001.JPG
0002.JPG
0003.JPG

Calling a file

Internal
memory or
memory card

Playback

0003.JPG

65

Voice Memos: Recording and Playback
Use the camera’s built-in microphone to record voice memos for pictures.

Recording Voice Memos

1

Display the desired picture in full-frame
playback mode (A 26) or thumbnail display
mode (A 50) and press the d button.
• The playback menu is displayed.

2

Use the multi selector to choose E Voice
memo and press the k button.
• The screen for recording voice memos is displayed.

3
More on Playback/In-Camera Editing

66

Delete
Protect
Rotate image
Small picture
Voice memo
Exit

Press and hold the k button to record a voice
memo.
• Recording ends after about 20 seconds or when the k
button is released.
• Do not touch the built-in microphone during
recording.
• During recording, o and p blink in the monitor.
• When recording ends, the voice memo playback
screen is displayed. Follow the instructions in step 3 of
“Playing Voice Memos” (A 67) to play the voice
memo.
• Press the d button before or after recording a voice
memo to return to full-frame playback mode.

D

Playback menu

More Information

See “File and Folder Names” (A 132) for more information.

Back

20s

17s

Voice Memos: Recording and Playback

Playing Voice Memos
Pictures for which voice memos have been recorded are indicated by p in fullframe playback mode.

1

Display the desired picture in fullframe playback mode (A 26) or
thumbnail display mode (A 50)
and press the d button.

15/11/2009 15:30
0004.JPG

• The playback menu is displayed.
4/

2

Use the multi selector to choose E Voice
memo and press the k button.
• The screen for playing voice memos is displayed.

Playback menu
Delete
Protect
Rotate image
Small picture
Voice memo
Exit

Press the k button to listen to the voice
memo.
• Playback ends when the voice memo ends or the k
button is pressed again.
• Use the zoom control g or f to adjust the volume.
• Press the d button before or after playing a voice
memo to return to full-frame playback mode.

6s

Back

Deleting Voice Memos
Select a picture with a voice memo and press the l
button. Use the multi selector to choose w and press
the k button. Only the voice memo will be deleted.

More on Playback/In-Camera Editing

3

4

Erase 1 image?

No
Yes

B

Voice Memos

• When a picture with a voice memo attached is deleted, both the picture and its voice memo are
deleted.
• If a voice memo already exists for the current picture, it must be deleted before a new voice memo
can be recorded.
• The COOLPIX S570 is not able to attach a voice memo to pictures recorded by other cameras.

67

Editing Pictures
Use the COOLPIX S570 to edit pictures in-camera and store them as separate files
(A 132). The editing features described below are available.
Editing function

Description

Quick retouch (A 70)

Easily create retouched copies in which contrast and saturation
have been enhanced.

D-Lighting (A 71)

Create a copy of the current picture with enhanced brightness
and contrast, brightening dark portions of the picture.

Skin softening (A 72)

Makes the subject’s skin appear smoother.

Small picture (A 73)

Create a small copy of pictures suitable for use on web pages or
as e-mail attachments.

Crop (A 74)

Enlarge the image or refine the composition and create a copy
containing only the portion visible in the monitor.

More on Playback/In-Camera Editing

C

Notes on In-camera Editing

• Pictures taken at an Image mode setting of P 16:9 (3968) (A 94) cannot be edited.
• The COOLPIX S570 editing functions are not available for pictures taken with non-COOLPIX S570
digital cameras.
• If no faces can be detected in the image, the image cannot be edited with skin softening (A 72).
• If a copy created using the COOLPIX S570 is viewed on a different digital camera, the picture may
not be displayed or may not be transferred to a computer.
• Editing functions are not available when there is not enough free space in the internal memory or
on the memory card.

C

Restrictions on Picture Editing

The following limitations apply when editing pictures that were created by editing.
Copies Created By:

68

Can Be Edited By:

Quick retouch
D-Lighting

Skin softening, small picture, or crop can be used.
Quick retouch and D-Lighting cannot be used together.

Skin softening

Quick retouch, D-Lighting, small picture, or crop can be used.

Small picture
Crop

No additional editing functions can be used.

• Copies created by the editing functions cannot be edited again using the same edit function.
• To use an editing function together with small picture or crop, use the other edit function first, and
use small picture or crop as the last edit function performed on that picture.
• Pictures that were taken using skin softening can be edited using skin softening.

Editing Pictures

D

Original Pictures and Edited Copies

• Copies created with editing functions are not deleted if the original pictures are deleted. The
original pictures are not deleted if copies created with editing functions are deleted.
• Edited copies are stored with the same recording date and time as the original.
• Print set (A 90) and Protect (A 109) settings configured for original pictures are not reflected in
their edited copies.

More on Playback/In-Camera Editing

69

Editing Pictures

Enhancing Contrast and Saturation (Quick Retouch)
Quick retouch can be used to easily create retouched copies in which contrast and
saturation have been enhanced. Copies created with the quick retouch option are
stored as separate files.

1

Select the desired picture from full-frame
(A 26) or thumbnail (A 50) playback mode
and press the d button.
• The playback menu is displayed.

2

Use the multi selector to choose k Quick
retouch and press the k button.
• The original version is displayed on the left and the
edited version is displayed on the right.

More on Playback/In-Camera Editing

3

Press the multi selector H or I to choose the
amount of enhancement performed and
press the k button.

Playback menu
Quick retouch
D-Lighting
Skin softening
Print set
Slide show
Exit

Quick retouch

• A new, retouched picture is created.
• To cancel, press the d button.

Normal
Back

• Copies created with the quick retouch option can be
recognized by the s icon displayed during playback.

Amount

15/11/2009 15:30
0004.JPG

4

D
70

More Information

See “File and Folder Names” (A 132) for more information.

4

Editing Pictures

Enhancing Brightness and Contrast: D-Lighting
D-Lighting can be used to create copies with enhanced brightness and contrast,
brightening dark portions of a picture. Enhanced copies are stored as separate
files.

1

Select the desired picture from full-frame
(A 26) or thumbnail (A 50) playback mode
and press the d button.
• The playback menu is displayed.

2

Use the multi selector to choose I D-Lighting
and press the k button.
• The original version is displayed on the left and the
edited version is displayed on the right.

Choose OK and press the k button.

Quick retouch
D-Lighting
Skin softening
Print set
Slide show
Exit

More on Playback/In-Camera Editing

3

Playback menu

D-Lighting

• A new copy with enhanced brightness and contrast is
created.
• To cancel, choose Cancel and press the k button.
OK
Cancel

• D-Lighting copies can be recognized by the c icon
displayed during playback.

15/11/2009 15:30
0005.JPG

5

D

5

More Information

See “File and Folder Names” (A 132) for more information.

71

Editing Pictures

Making Skin Appear Smoother (Skin Softening)
Skin softening can be applied to faces that are detected in pictures already taken,
to make skin appear smoother. Pictures edited with this function are stored as
separate files.

1

Select the desired picture from full-frame
(A 26) or thumbnail (A 50) playback mode
and press the d button.
• The playback menu is displayed.

2

Use the multi selector to choose e Skin
softening and press the k button.
• The screen that allows you to set the amount of skin
softening appears.
• If no faces can be detected in the image, a warning is
displayed and the screen returns to the playback menu.

More on Playback/In-Camera Editing

3

Press the multi selector H or I to choose the
amount of enhancement performed and press
the k button.
• A confirmation screen is displayed, and the image is
displayed zoomed in on the face edited by skin
softening.

4

Playback menu
Quick retouch
D-Lighting
Skin softening
Print set
Slide show
Exit

Skin softening

Normal
Back

Confirm the results.
• Up to 12 faces, in order of proximity to the center of the
frame, can be enhanced.
• When multiple faces are edited using skin softening,
use the multi selector J and K to switch the face that
is displayed.
• To adjust the amount of skin softening, press the d
button and return to step 3.
• Press the k button to create a copy edited with skin
softening.
• Pictures edited with skin softening can be recognized
by the E icon displayed during playback.

Amount

Preview

Back

Save

15/11/2009 15:30
0004.JPG

4

C
72

4

Notes on Skin Softening

Depending on conditions such as the direction the subject is facing or the brightness of the face, the
face may not be detected properly, or the desired effect may not be achieved.

Editing Pictures

Resizing Pictures: Small Picture
Create a small copy of the current picture. The following sizes are available. Copies
are stored as separate files with a compression ratio of 1:16.
Option
l 640×480
m 320×240
n 160×120

1

Description
Suited to television playback.
Suited to display on web pages.
Suited to e-mail attachments.

Select the desired picture from full-frame
(A 26) or thumbnail (A 50) playback mode
and press the d button.
• The playback menu is displayed.

2

Use the multi selector to choose g Small
picture and press the k button.

Playback menu

Exit

3

Choose the desired copy size and press the k
button.

Small picture

640×480
320×240
160×120

Exit

4

More on Playback/In-Camera Editing

Delete
Protect
Rotate image
Small picture
Voice memo

Choose Yes and press the k button.
• A new, smaller copy is created.
• To cancel, choose No and press the k button.
• The copy is displayed with a gray frame.

Create small picture file?

No
Yes

D

More Information

See “File and Folder Names” (A 132) for more information.

73

Editing Pictures

Creating a Cropped Copy: Crop
Create a copy containing only the portion visible in the monitor when u is
displayed with playback zoom (A 52) enabled. Cropped copies are stored as
separate files.

1

Rotate the zoom control to g (i) in full-frame
playback mode to zoom in on the image.
• To crop a picture displayed in “tall” (portrait)
orientation, zoom in on the picture until the black bars
displayed on the both sides of the monitor disappear.
The cropped picture will be displayed in landscape
orientation. To crop the picture in its current “tall” (portrait) orientation, first, use the
Rotate image option (A 110) to rotate the picture so that it is displayed in
landscape orientation. Next, enlarge the picture for cropping, crop the picture, and
then rotate the cropped picture back to “tall” (portrait) orientation.

2

Refine copy composition.

More on Playback/In-Camera Editing

• Rotate the zoom control to g (i) or f (h) to adjust
the zoom ratio.
• Press the multi selector H, I, J or K to scroll the
picture until only the portion you want to copy is visible
in the monitor.

3

Press the d button.

4

Use the multi selector to choose Yes and
press the k button.
• A new picture, containing only the portion visible in
the monitor, is created.
• To cancel, choose No and press the k button.

C

Save this image as
displayed?

No
Yes

Image Size

As the area to be saved is reduced, the image size (pixels) of the cropped copy is also reduced.
When the size of the cropped copy is 320 × 240 or 160 × 120, the small picture icon B or C is
displayed on the left of the screen in full-frame playback mode.

D
74

More Information

See “File and Folder Names” (A 132) for more information.

Movies

Recording Movies
To shoot movies with sound recorded via the built-in microphone, select shooting
mode and follow the steps below.

1

Enter movie mode by pressing the
A button in shooting mode and
selecting D (press the multi selector
H or I), and then pressing the k
button.

Movie

• The maximum length of the movie that can
be recorded is displayed in the monitor
(A 76).The maximum movie length for each movie is 25 minutes, regardless of
memory card capacity.

2

Press the shutter-release button all
the way down to start recording.

B

Recording Movies

Movies

• The camera focuses on the subject in the
center of the frame.
• A progress bar at the bottom of the
monitor shows the amount of recording
20s
time remaining.
• To end recording, press the shutter-release button all the way down a second time.
• If recording time runs out, recording stops automatically.

• Macro mode (A 31) is enabled. Flash (A 28), self-timer (A 30), and exposure compensation
(A 32) are disabled.
• Macro mode setting cannot be applied or changed while movies are being recorded. Apply or
change setting as necessary before movie recording begins.
• Optical zoom cannot be adjusted once movie recording begins. Digital zoom cannot be applied
before movie recording begins. However, digital zoom (up to 2×) can be applied while movies are
being recorded.
• The angle of view (field of view) when recording movies is smaller than when taking still pictures.

B

Note on Recording Movies

When the movie has been fully recorded to the internal memory or memory card, the monitor
display will revert to the normal shooting mode display. Do not open the battery-chamber/
memory card slot cover while movies are being recorded. Removing the memory card while
movies are being recorded could result in loss of data or in damage to the camera or card.

C

Changing Movie Settings

Movie options (A 76), Autofocus mode (A 77), and Electronic VR (A 77) settings can be
changed.

75

The Movie Menu
Movie options, Autofocus mode (A 77), and Electronic VR (A 77) settings
can be changed. Press the d button in movie mode to display the movie menu
and use the multi selector to modify and apply settings.

D Movie Options
Set to D (Movie) M d (Movie menu) M D Movie options

The movie menu offers the options shown below.
Option

Image size and frame rate

J TV movie 640P
(default setting)

Image size: 640 × 480 pixels
Frame rate: 30 frames per second

I TV movie 640

Image size: 640 × 480 pixels
Frame rate: 15 frames per second

L Small size 320P

Image size: 320 × 240 pixels
Frame rate: 30 frames per second

S Small size 320

Image size: 320 × 240 pixels
Frame rate: 15 frames per second

Movies

C

Movie Options and Maximum Movie Length
Option

Internal memory
(approx. 47 MB)

J TV movie 640P
(default setting)
I TV movie 640

Memory card (512 MB)
31 s

Approx. 5 min 40 s

56 s

Approx. 10 min 20 s

L Small size 320P

1 min 53 s

Approx. 20 min 40 s

S Small size 320

3 min 34 s

Approx. 25 min

* All figures are approximate. The maximum recording time may vary with make of memory card.
The maximum movie length for each movie is 25 minutes, regardless of memory card capacity.
The maximum recording time that is displayed is the maximum recording time for one movie.

D
76

More Information

See “File and Folder Names” (A 132) for more information.

The Movie Menu

I Autofocus Mode
Set to D (Movie) M d (Movie menu) M I Autofocus mode

Choose how the camera focuses in movie mode.
Option
ASingle AF
(default setting)
BFull-time AF

Description
Focus is locked when the shutter-release button is pressed.
The camera focuses continuously.
To prevent the sound of the camera focusing from interfering with
recording, use of Single AF is recommended.

w Electronic VR
Set to D (Movie) M d (Movie menu) M w Electronic VR

Choose whether to use electronic VR (vibration reduction) when shooting movies.
Option
w On

Description
Reduce the effects of camera shake in all movie modes.
Movies

k Off (default setting) Disable electronic VR.

When vibration reduction is enabled, the current setting is displayed during
shooting (when Off is selected, an icon for the current setting is not displayed)
(A 6).

77

Movie Playback
In full-frame playback mode (A 26), movies are
recognized by the Movie options icon (A 76). To play
a movie, display it in full-frame playback mode and
press the k button.

15/11/2009 15:30
0010.AVI

10s

Rotate the zoom control to g or f to adjust playback
volume.
Playback controls appear at the top of the monitor.
Press the multi selector J or K to choose a control,
then press the k button to perform the selected
operation. The following operations are available.

Pausing

4s

During
playback

Movies

To

Use

Rewind

K

Advance

L

Pause

O

Description
Rewind movie. Playback resumes when the k button is
released.
Advance movie. Playback resumes when the k button is
released.
Pause playback.
While paused, use the controls to perform the following
operations.
Rewind movie by one frame. Rewind continues while the
M
k button is pressed.
Advance movie by one frame. Advance continues while
N
the k button is pressed.
P

End

Q

Volume
indicator

Resume playback.

End playback and return to full-frame playback.

Deleting Movie Files

78

Erase 1 image?
Press the l button when displayed in full-frame
playback mode (A 26), or when selected in thumbnail
playback mode (A 50). A confirmation dialog is
No
displayed. Choose Yes and press the k button to delete
Yes
the movie, or choose No and press the k button to
return to the normal playback display without deleting the movie.

Connecting to Televisions, Computers and Printers

Connecting to a TV
Connect the camera to a television using the supplied audio/video cable (AV
cable) to play back pictures on the television.

Turn off the camera.

2

Connect the camera to the TV using the supplied AV cable.
• Connect the yellow plug to the video-in jack on the TV, and the white plug to the
audio-in jack.

Yellow

3

White

Connecting to Televisions, Computers and Printers

1

Tune the television to the video channel.
• See the documentation provided with your television for details.

4

Hold down the c button to turn on the
camera.
• The camera enters playback mode, and the pictures
taken will be displayed on the television.
• While connected to the TV, the camera monitor will
remain off.

B

Connecting the Audio/Video Cable

When connecting the AV cable, be sure that the camera connector is oriented correctly. Do not use
force when connecting the AV cable to the camera. When disconnecting the AV cable, do not pull
the connector at an angle.

B

Video Mode

Be sure that the camera’s video mode setting conforms to the standard used by your television. The
video mode setting is an option set in the setup menu (A 112) ➝ Video mode (A 126).

79

Connecting to a Computer
Use the supplied USB cable to connect the camera to a computer, and copy
(transfer) pictures to the computer with the supplied Nikon Transfer software.

Before Connecting the Camera
Connecting to Televisions, Computers and Printers

Install the Software
Before connecting the camera to a computer, software, including Nikon Transfer,
ViewNX for displaying transferred pictures, and Panorama Maker for creating
panorama photos, must be installed from the supplied Software Suite CD. For
more information on installing the software, refer to the Quick Start Guide.

Compatible Operating Systems
Windows
Preinstalled versions of Windows Vista Home Basic/Home Premium/Business/
Enterprise/Ultimate (Service Pack 1, 32-bit version)
Windows XP Home Edition/Professional (Service Pack 3)

Macintosh
Mac OS X (version 10.3.9, 10.4.11, 10.5.6)
Refer to the Nikon website for the latest information on operating system
compatibility.

B

80

Notes on Power Source

• When connecting the camera to a computer, use a fully charged battery to prevent the camera
from turning off unexpectedly.
• If the AC Adapter EH-62D (available separately) is used, COOLPIX S570 can be powered from a
home electrical outlet. Do not use any other AC adapters as it will cause the camera to heat up or
malfunction.

Connecting to a Computer

Transferring Pictures from the Camera to a Computer

1
2
3

Start the computer to which Nikon Transfer was installed.

4

Turn on the camera.

Turn off the camera.

The power-on lamp will light up. The camera monitor will
remain off.
• Windows Vista
When the AutoPlay dialog is displayed on the
computer, click Copy pictures to a folder on my computer using Nikon
Transfer. Nikon Transfer will start.
To bypass this dialog in the future, check Always do this for this device.

Connecting to Televisions, Computers and Printers

Connect the camera to the computer using the supplied USB cable.

• Windows XP
When the action selection dialog is displayed, select Nikon Transfer Copy pictures
to a folder on my computer and click OK. Nikon Transfer will start.
To bypass this dialog in the future, check Always use this program for this action..
• Mac OS X
Nikon Transfer will start automatically if Yes was selected in the Auto-Launch setting
dialog when Nikon Transfer was first installed.

B

Connecting the USB Cable

• When connecting the USB cable, be sure that the connectors are oriented correctly.
Do not use force when connecting the USB cable. When disconnecting the USB cable, do not pull
the connector at an angle.
• Connection may not be recognized when the camera is connected to a computer via a USB hub.

81

Connecting to a Computer

5

Confirm that the source device is displayed in the transfer options
Source panel and click Start Transfer.

Connecting to Televisions, Computers and Printers

Source Device

Start Transfer
button
• At the Nikon Transfer default setting, all pictures are transferred to the computer.
• At the Nikon Transfer default settings, ViewNX starts automatically when transfer is
complete and transferred pictures can be viewed.

• For more information on using Nikon Transfer or ViewNX, refer to help information
contained in Nikon Transfer or ViewNX (A 83).

Disconnecting the Camera and Computer
• While transferring, do not turn the camera off or disconnect the camera and
computer.
• When disconnecting, turn the camera off, then disconnect the USB cable.

82

Connecting to a Computer

C

Using a Card Reader

D

Starting Nikon Transfer or ViewNX Manually

• Windows: From the Start menu, open All Programs ➝ Nikon Transfer ➝ Nikon Transfer (or
All Programs ➝ ViewNX ➝ ViewNX). You can also double-click the Nikon Transfer or
ViewNX shortcut icon on the desktop.
• Mac OS X: Open the Applications folder, then double-click Nikon Software ➝ Nikon Transfer
➝ Nikon Transfer (or Nikon Software ➝ ViewNX ➝ ViewNX). You can also click the Nikon
Transfer or ViewNX icon in the dock.

D

Viewing the Help File for Nikon
Transfer or ViewNX

For details on using Nikon Transfer or
ViewNX, view the help file by starting Nikon
Transfer or ViewNX, then selecting Help ➝
Nikon Transfer Help or ViewNX Help.

D

Connecting to Televisions, Computers and Printers

The pictures stored on the memory card inserted into a card reader or similar device can also be
transferred to the computer using Nikon Transfer.
• If the memory card has a capacity greater than 2 GB, or is SDHC-compliant, the intended device
must support these features of the memory card.
• Insert the memory card into the card reader or similar device, then refer to step 4 (A 81) and
transfer pictures.
• To transfer pictures stored in the camera’s internal memory to the computer, the pictures must
first be copied to a memory card using the camera (A 110).

Panorama Creation with Panorama Maker

• Use a series of pictures taken using the Panorama assist option in scene mode (A 40) to create
a single panorama photo with Panorama Maker.
• Panorama Maker can be installed to a computer using the supplied Software Suite CD.
• After installation is complete, follow the procedure described below to start Panorama Maker.
Windows
Choose Start menu>All Programs>ArcSoft Panorama Maker 4>Panorama Maker 4.
Macintosh
Open Applications by selecting Applications from the Go menu, and double-click the
Panorama Maker 4 icon.
• For more information on using Panorama Maker, refer to the on-screen instructions and help
information contained in Panorama Maker.

D

Image File Names and Folder Names

See “File and Folder Names” (A 132) for more information.

83

Connecting to a Printer
Users of PictBridge-compatible (A 152) printers can connect the camera directly
to the printer and print pictures without using a computer.
Take pictures
Connecting to Televisions, Computers and Printers

Select pictures for printing
using Print set option (A 90)

Connect to printer (A 85)

Print pictures one at a
time (A 86)

Print multiple pictures (A 87)

Turn camera off and disconnect USB cable

B

Notes on Power Source

• When connecting the camera to a printer, use a fully charged battery to prevent the power from
turning off unexpectedly.
• If the AC Adapter EH-62D (available separately) is used, COOLPIX S570 can be powered from a
home electrical outlet. Do not use any other AC adapters as it will cause the camera to heat up or
malfunction.

D

84

Printing Pictures

In addition to printing pictures transferred to a computer from your personal printer and printing
over a direct camera-to-printer connection, the following options are also available for printing
pictures:
• Insert a memory card into a DPOF-compatible printer’s card slot
• Take a memory card to a digital photo lab
For printing using these methods, specify the pictures and the number of prints each using the
Print set in the playback menu (A 90).

Connecting to a Printer

Connecting the Camera and Printer
Turn off the camera.

2

Turn on the printer.
• Check printer settings.

3

Connect the camera to the printer using the supplied USB cable.

4

Turn on the camera.

Connecting to Televisions, Computers and Printers

1

• When connected correctly, the PictBridge startup
screen (1) will be displayed in the camera monitor.
Then the Print selection screen (2) will be displayed.

1

2

Print selection

15/11
2009
NO. 4
[
4]

B

Connecting the USB Cable

When connecting the USB cable, be sure that the connectors are oriented correctly. Do not use force
when connecting the USB cable. When disconnecting the USB cable, do not pull the connector at an
angle.

85

Connecting to a Printer

Printing Pictures One at a Time
After connecting the camera to the printer correctly (A 85), print pictures by
following the procedures below.

1
Connecting to Televisions, Computers and Printers

Use the multi selector to choose the desired
picture and press the k button.

Print selection

15/11
2009

• Rotate the zoom control to f (h) to switch to 12thumbnail display, and to g (i) to switch back to fullframe playback.

2

Choose Copies and press the k button.

NO. 4
[
4]

PictBridge
Start print
Copies
Paper size

Exit

3

Choose the number of copies (up to nine) and
press the k button.

Copies

4

Exit

4

Choose Paper size and press the k button.

PictBridge
Start print
Copies
Paper size

Exit

5

Choose the desired Paper size and press the
k button.
• To specify paper size using printer settings, choose
Default in the paper size menu.

86

Paper size
Default
3.5×5 in.
5×7 in.
Postcard
100×150 mm
Exit

Connecting to a Printer

6

Choose Start print and press the k button.

PictBridge
Start print
Copies
Paper size

7

Printing starts.
• Monitor display returns to the print selection screen
(step 1) when printing is complete.
• To cancel before all copies have been printed, press the
k button.

Printing

002 / 004

Cancel

Current print/
total number of prints

Printing Multiple Pictures
After connecting the camera to the printer correctly (A 85), print pictures by
following the procedures below.

1

Connecting to Televisions, Computers and Printers

Exit

When the print selection screen is displayed,
press the d button.
• The print menu is displayed.

2

Use the multi selector to choose Paper size
and press the k button.
• To exit the print menu, press the d button.

Print menu
Print selection
Print all images
DPOF printing
Paper size
Exit

3

Choose the desired Paper size and press the
k button.
• To specify paper size using printer settings, choose
Default in the paper size menu.

Paper size
4×6 in.
8×10 in.
Letter
A3
A4
Exit

87

Connecting to a Printer

4

Choose Print selection, Print all images or
DPOF printing and press the k button.

Print menu
Print selection
Print all images
DPOF printing
Paper size

Connecting to Televisions, Computers and Printers

Exit

Print selection
Choose the pictures (up to 99) and the number
of copies (up to nine) of each.
• Press the multi selector J or K to select
pictures, and press H or I to set the number
of copies for each.
• Picture selected for printing can be
recognized by the check mark (y) and the
numeral indicating the number of copies to
be printed. Check marks are not displayed
with pictures for which no copies have been
specified and these pictures will not be
printed.
• Rotate the zoom control to g (i) to switch to
full-frame playback.
• Rotate the zoom control to f (h) to switch
back to 12-thumbnail display.
• Press the k button when setting is complete.
• When the menu shown at right is displayed,
choose Start print and press the k button
to start printing. Choose Cancel and press
the k button to return to the print menu.

1

1

Back

Print selection

0 0 3 prints

Start print
Cancel
Exit

Print all images
All pictures stored in the internal memory, or on
the memory card, are printed one at a time.
• When the menu shown at right is displayed,
choose Start print and press the k button
to start printing.
• Choose Cancel and press the k button to
return to the print menu.

88

3

Print selection

Print all images

0 0 4 prints

Start print
Cancel
Exit

1

Connecting to a Printer
DPOF printing
Print pictures for which a print order was
created in Print set (A 90).

• Choose Cancel and press the k button to
return to the print menu.
• To view the current print order, choose View
images and press the k button. To print
pictures, press the k button again.

0 1 0 prints
Start print
View images
Cancel
Exit

10

View images

Back

5

Printing starts.
• Monitor display returns to the print menu (step 2) when
printing is complete.
• To cancel before all copies have been printed, press the
k button.

Printing

002 / 010

Connecting to Televisions, Computers and Printers

• When the menu shown at right is displayed,
choose Start print and press the k button
to start printing.

DPOF printing

Cancel

Current print/
total number of prints

C

Paper Size

The camera supports the following paper sizes: Default (the default paper size for the current
printer), 3.5×5 in., 5×7 in., 100×150 mm, 4×6 in., 8×10 in., Letter, A3, and A4. Only sizes
supported by the current printer will be displayed. To specify paper size using printer settings,
choose Default in the paper size menu.

89

Creating a DPOF Print Order: Print Set

Connecting to Televisions, Computers and Printers

The Print set option in the playback menu is used to create digital “print orders”
for printing on DPOF-compatible devices (A 152).
When the camera is connected to a PictBridge-compatible printer, pictures can be
printed from the printer according to the DPOF print order you have created for
pictures on the memory card. If the memory card is removed from the camera, you
can create the DPOF print order for pictures in the internal memory and print
pictures according to the DPOF print order.

1

Press the d button in playback mode.
• The playback menu is displayed.

2

Use the multi selector to choose Print set and
press the k button.
• When using list by date, auto sort, or favorite pictures
playback mode: Proceed to step 4

3

Choose Select images and press the k
button.

Playback menu
Quick retouch
D-Lighting
Skin softening
Print set
Slide show
Exit

Print set
Select images
Delete print set

Exit

4

Choose the pictures (up to 99) and the
number of copies (up to nine) for each.

Print selection

1

90

1

1

• Press the multi selector J or K to select pictures, and
press H or I to set the number of copies for each.
• Picture selected for printing can be recognized by the
check mark (y) icon and the numeral indicating the
Back
number of copies to be printed. Check marks are not
displayed with pictures for which no copies have been specified and these pictures
will not be printed.
• Rotate the zoom control to g (i) to switch to full-frame playback.
• Rotate the zoom control to f (h) to switch back to 12-thumbnail display.
• Press the k button when setting is complete.

Creating a DPOF Print Order: Print Set

5

Choose whether or not to print shooting date
and photo information.

Print set
Done

Pictures selected for printing are recognized by the w
icon displayed with playback.

15/11/2009 15:30
0004.JPG

4

C

4

Deleting All Print Orders

Choose Delete print set in step 3 and press the k button to delete print orders for all pictures.

B

Notes on the Print Set Option

When using Print set while viewing pictures by List by date, Auto
sort, or Favorite pictures playback, if pictures other than the selected
date or type are already set for printing, the screen shown at right
will be displayed.
• If Yes is selected, the current settings are added to the previous
settings.
• If No is selected, the previous settings are deleted and only the
current settings remain.

Connecting to Televisions, Computers and Printers

• Choose Date and press the k button to print the
Date
shooting date on all pictures in the print order.
Info
• Choose Info and press the k button to print shutter
speed and aperture information on all pictures in the
Exit
print order.
• Choose Done and press the k button to complete the print order and exit.

Print set
Save print marking for other
dates?
No
Yes
Exit

When using List by date
Print set
Save print marking for other
images?
No
Yes
Exit

When using Auto sort/
Favorite pictures

91

Creating a DPOF Print Order: Print Set
If more than 99 pictures are selected as a result of adding the
current settings, the screen shown at right will be displayed.
• If Yes is selected, the previous settings are deleted and only the
current settings remain.
• If Cancel is selected, the current settings are deleted and only the
previous settings remain.

Print set
Too many images selected.
Remove print marking for
other dates?
Yes
Cancel

Connecting to Televisions, Computers and Printers

Exit

When using List by date
Print set
Too many images selected.
Remove print marking from
other images?
Yes
Cancel
Exit

When using Auto sort/
Favorite pictures

B

Notes on Printing Shooting Date and Photo Information

When the Date and Info options are enabled in the Print set menu, shooting date and photo
information are printed on pictures when a DPOF-compatible (A 152) printer which supports
printing of shooting date and photo information is used.
• Photo information cannot be printed when the camera is connected directly to a printer, via the
supplied USB cable, for DPOF printing (A 89).
• Date and Info are reset each time the print set menu is displayed.
• The date and time printed on pictures with DPOF printing when
Date in the Print set menu is enabled, are those recorded with
the picture as it was taken. Date and time printed using this
option are not affected when the camera’s date and time setting
are changed from the setup menu after pictures are recorded.
15.11.2009

D

Date Imprint

The shooting date and time can be imprinted in pictures at the time of shooting by using Date
imprint (A 120) in the setup menu. This information can be printed even from printers that do not
support printing of date and time. Only the date with the Date imprint option will be printed, even
if Print set is enabled with Date selected in the print set screen.

92

Shooting, Playback and Setup Menus

Shooting Options: The Shooting Menu
While shooting in A (auto) mode (A 20), the shooting menu contains the
following options.
A

A 94

Image mode

Choose the image mode (a combination of the image size and image quality
(compression)) to be used when recording.
Also available when using other shooting modes (except movie mode).
B

White balance

C

Continuous

A 96

Match white balance to the light source.
A 98

Change settings for Continuous or BSS (best shot selector).
E

A 99

ISO sensitivity

F

A 100

Color options
Apply color effects to pictures as they are recorded.

G

A 101

AF area mode
Choose how the focus area is determined.

Displaying the Shooting Menu
Enter A (auto) mode (A 20).
Press the d button to display the shooting menu.

Shooting, Playback and Setup Menus

Control the camera’s sensitivity to light.

Shooting menu
Image mode
White balance
Continuous
ISO sensitivity
Color options

11

Exit

• Use the multi selector to choose and apply settings (A 9).
• To exit the shooting menu, press the d button.

B

Functions that Cannot Be Applied Simultaneously

Some functions cannot be enabled in conjunction with others (A 105).

93

Shooting Options: The Shooting Menu

A Image Mode
Set to A (auto) M d (Shooting menu) M A Image mode

Choose an image mode, which is the combination of image size and image quality
(compression), according to how you plan to use the picture and the capacity of
the internal memory or memory card.
The larger the image, the larger the size at which it can be printed or displayed
without becoming noticeably “grainy”, limiting the number of pictures that can be
recorded.
Shooting, Playback and Setup Menus

Image mode

Image size
(pixels)

H

High (4000P)

4,000×3,000

I

Normal (4000)
(default setting)

4,000×3,000

R

Normal (3264)

3,264×2,448

L

Normal (2592)

2,592×1,944

M

Normal (2048)

2,048×1,536

N

PC screen (1024)

1,024×768

Suited to display on computer monitor. The
compression ratio is approximately 1:8.

O

TV screen (640)

640×480

Suited to full-screen display on a television
or distribution by e-mail or the web. The
compression ratio is approximately 1:8.

P

16:9 (3968)

3,968×2,232

Pictures with an aspect ratio of 16:9 can be
taken. The compression ratio is
approximately 1:8.

Description
Highest quality, suitable for enlargements
or high-quality prints. The compression
ratio is approximately 1:4.
The best choice in most situations. The
compression ratio is approximately 1:8.
Smaller size allows more pictures to be
stored. The compression ratio is
approximately 1:8.

The icon for the current setting is displayed in the monitor in shooting and
playback modes (A 6, 7).

C
94

Image Mode

• Change made to this setting applies to all shooting modes (except movie mode).
• This feature cannot be used simultaneously with certain features. ➝ “Functions that Cannot Be
Applied Simultaneously“ (A 105)

Shooting Options: The Shooting Menu

C

Number of Exposures Remaining

The following table lists the approximate number of pictures that can be stored in internal memory
and on a 512 MB memory card. Note that the number of pictures that can be stored will differ
depending on the composition of the picture (due to JPEG compression). In addition, this number
may differ depending on the make of memory card, even if the capacity for the memory card is the
same.

Setting

Print size2
(cm/in.)

60

34 × 25/13 × 10

11

120

34 × 25/13 × 10

R Normal (3264)

17

190

28 × 21/11 × 8

L Normal (2592)

29

310

22 × 16/8.5 × 6.5

48

520

17 × 13/7 × 5

N PC screen (1024)

162

1780

9 × 7/3.5 × 2.5

O TV screen (640)

280

3070

5 × 4/2 × 1.5

15

170

34 × 19/13 × 7.5

If the number of exposures remaining is 10,000 or more, the number of exposures
remaining display shows “9999”.
All figures are approximate. Print size at an output resolution of 300 dpi. Print sizes are
calculated by dividing the number of pixels by printer resolution (dpi) and multiplying by
2.54 cm (1 in.). However, at the same image size, pictures printed at higher resolutions will
print smaller than the size indicated, and those printed at lower resolutions will print larger
than the size indicated.

Shooting, Playback and Setup Menus

5

I Normal (4000)

P 16:9 (3968)

2

Memory card1
(512 MB)

H High (4000P)

M Normal (2048)

1

Internal
memory
(approx. 47 MB)

95

Shooting Options: The Shooting Menu

B White Balance
Set to A (auto) M d (Shooting menu) M B White balance

Shooting, Playback and Setup Menus

The color of light reflected from an object varies with the color of the light source.
The human brain is able to adapt to changes in the color of the light source, with
the result that white objects appear white whether seen in the shade, direct
sunlight, or under incandescent lighting. Digital cameras can mimic this
adjustment by processing images according to the color of the light source. This is
known as “white balance”. For natural coloration, choose a white balance setting
that matches the light source before shooting. Although the default setting, Auto,
can be used under most types of lighting, you can apply the white balance setting
suited to a particular light source to achieve more accurate results.
a

Auto (default setting)
White balance automatically adjusted to suit lighting conditions. Best choice in
most situations.

b

Preset manual
Neutral-colored object used as reference to set white balance under unusual
lighting conditions. Refer to “Preset Manual” for more information (A 97).

c

Daylight
White balance adjusted for direct sunlight.

d

Incandescent
Use under incandescent lighting.

e

Fluorescent
Use under most types of fluorescent lighting.

f

Cloudy
Use when taking pictures under overcast skies.

g

Flash
Use with the flash mode.

The effects of the selected option can be previewed in the monitor. At settings
other than Auto, the icon for the current setting is displayed in the monitor (A 6).

B

White Balance

This feature cannot be used simultaneously with certain features. ➝ “Functions that Cannot Be
Applied Simultaneously“ (A 105)

B
96

Flash Mode

At white-balance settings other than Auto or Flash, turn the flash off (W) (A 28).

Shooting Options: The Shooting Menu

Preset Manual
Preset manual is used with mixed lighting or to compensate for light sources with
a strong color cast when the desired effect has not been achieved with white
balance settings like Auto and Incandescent (for example, to make images shot
under a lamp with a red shade look as though they had been shot under white
light).

1

Place a white or gray reference object under the lighting that will be
used during shooting.

2

Display the shooting menu (A 93), use the
multi selector to set White balance to b
Preset manual, then press the k button.

3

Choose Measure.

Auto
Preset manual
Daylight
Incandescent
Fluorescent
Exit

Preset manual

• To apply the most recently measured value for preset
manual, choose Cancel and press the k button.
Cancel
Measure
Exit

4

Frame the reference object.

Shooting, Playback and Setup Menus

• The camera zooms in.

White balance

Preset manual

Cancel
Measure
Exit

Reference object frame

5

Press the k button.
• The shutter is released and the new white balance value is set (no picture is recorded).

B

Note on Preset Manual

The camera cannot measure a white balance value for when the flash fires. When shooting with the
flash, set White balance to Auto or Flash.

97

Shooting Options: The Shooting Menu

C Continuous
Set to A (auto) M d (Shooting menu) M C Continuous

Change settings to Continuous or BSS (best shot selector). Flash will be switched
off for Continuous, BSS or Multi-shot 16, and focus, exposure and white
balance are fixed at the values for the first picture in each series.
U

Single (default setting)
One shot is taken each time shutter-release button is pressed.

V

Continuous

Shooting, Playback and Setup Menus

While the shutter-release button is held down, the camera shoots up to 5 pictures at a rate
of up to about 0.9 frames per second (fps) (when image mode is set to I Normal (4000)).
D

BSS (Best Shot Selector)
The “best shot selector” is recommended when shooting with the flash off or the
camera zoomed in, or in other situations in which inadvertent motion can result in
blurred pictures. When BSS is on, the camera takes up to ten pictures while the
shutter-release button is held down. The sharpest picture in the series is
automatically selected and saved.

W

Multi-shot 16
Each time the shutter-release button is pressed all the way
down, 16 pictures are shot at about 24 frames per second and
the camera arranges them in a single picture.
• Images are captured with the image mode locked at L 2592.
• Digital zoom is not available.

At settings other than Single, the indicator for the current setting is displayed in
the monitor (A 6).

B

Note on Continuous Shooting

• The maximum frame rate with continuous shooting may vary, depending upon the current image
mode setting and the memory card used.
• This feature cannot be used simultaneously with certain features. ➝ “Functions that Cannot Be
Applied Simultaneously“ (A 105)

B

Note on BSS

BSS may not produce the desired results if the subject moves or the composition changes while the
shutter-release button is pressed all the way down.

B
98

Note on Multi-shot 16

Smear (A 136) visible in the monitor when shooting with Multi-shot 16 enabled will be recorded
with images. Avoiding bright objects such as the sun, reflections of the sun, and electric lights when
shooting with Multi-shot 16 enabled is recommended.

Shooting Options: The Shooting Menu

E ISO Sensitivity
Set to A (auto) M d (Shooting menu) M E ISO sensitivity

Sensitivity is a measure of how quickly the camera reacts to light. The higher the
sensitivity, the less light needed to make an exposure. Although a high ISO rating
is suited for taking pictures of subjects in action or in poor lighting, high sensitivity
is often associated with “noise” - randomly spaced, brightly colored pixels
concentrated in dark parts of the image.

At the settings other than Auto, the current setting is displayed in the monitor
(A 6). If Auto is selected and the sensitivity is raised above ISO 80, the E icon
will be displayed (A 29). When set to Fixed range auto, U and the upper limit
of the ISO sensitivity is displayed.

B

Shooting, Playback and Setup Menus

Auto (default setting)
Sensitivity is ISO 80 under normal conditions; when lighting is poor and the flash is
off, the camera compensates by raising sensitivity to a maximum of ISO 1600.
Fixed range auto
Choose the range in which the camera automatically adjusts ISO sensitivity, from
ISO 80-400 (default setting), or ISO 80-800. The camera will not raise sensitivity
beyond the maximum value in the selected range. Set the maximum value for ISO
sensitivity for effective control over the amount of “grain” that appears in images.
80, 100, 200, 400, 800, 1600, 3200
Sensitivity will be locked at the specified value.
• When ISO sensitivity is locked, Motion detection (A 122) does not function.

Notes on ISO Sensitivity

This feature cannot be used simultaneously with certain features. ➝ “Functions that Cannot Be
Applied Simultaneously“ (A 105)

99

Shooting Options: The Shooting Menu

F Color Options
Set to A (auto) M d (Shooting menu) M F Color options

Make colors more vivid or record pictures in monochrome.
n
o
p

Shooting, Playback and Setup Menus

q
r

The effects of the selected option can be previewed in the monitor (A 6). At
settings other than Standard color, the icon for the current setting is displayed in
the monitor.

B
100

Standard color (default setting)
Use for pictures exhibiting natural color.
Vivid color
Use to achieve a vivid, “photoprint” effect.
Black-and-white
Record pictures in black-and-white.
Sepia
Record pictures in sepia tones.
Cyanotype
Record pictures in cyan-blue monochrome.

Notes on Color Options

This feature cannot be used simultaneously with certain features. ➝ “Functions that Cannot Be
Applied Simultaneously“ (A 105)

Shooting Options: The Shooting Menu

G AF Area Mode
Set to A (auto) M d (Shooting menu) M G AF area mode

Choose how the focus area is determined.
When digital zoom is in effect, focus will be on the center of the screen regardless
of the AF area mode setting.
a

Face priority (default setting)

w

11

Auto
The camera automatically selects the focus area (one
of nine) containing the subject closest to the camera.
Press the shutter-release button halfway to activate
the focus area. When the shutter-release button is
pressed halfway, the focus area selected by the
camera will be displayed in the monitor.

Shooting, Playback and Setup Menus

If the camera detects a face, it focuses on the face
(Face Priority ➝ A 103). If more than one face is
recognized, focus will be on the face closest to the
camera.
When shooting pictures of subjects other than
people, or framing a subject with which no face is
recognized, AF area mode will switch to Auto, and
the camera will automatically select the focus area
(one of nine) containing the subject closest to the
camera.

11

Focus areas
x

Manual
This option is suited to situations in which the
intended subject is relatively still and not positioned
in the center of the frame.
Press the multi selector H, I, J, or K to select from
99 focus areas in the frame. Pictures can be taken
while focus-area selection screen is displayed.
To end focus-area selection and adjust the flash,
macro, self-timer and exposure compensation
settings, press the k button. To return to the focus
area selection screen, press the k button again.

Focus area

Selectable focus area

101

Shooting Options: The Shooting Menu
y

Center
The camera focuses on the subject in the center of
the frame.
The center focus area is always displayed.

11

Focus area

Shooting, Playback and Setup Menus

D

Focus Lock

Use focus lock to focus on off-center subjects when center is selected for AF area mode.
To focus on off-center subjects when Center is selected for AF area mode, use focus lock as
described below.
1 Position the subject in the center of the frame.

11

2 Press the shutter-release button halfway.
• Confirm that the focus area is green.
• Focus and exposure are locked.
1/125 F2.7

3 Continue holding down the shutter-release button halfway
and recompose the picture.
• Be sure that the distance between the camera and the subject does
not change.
1/125 F2.7

4 Press the shutter-release button the rest of the way down to take the
picture.

D
102

More Information

See “Autofocus” (A 25) for more information.

Shooting Options: The Shooting Menu

Face Priority
When the camera is pointed at a face, the face is automatically detected and the
camera focuses on the face.
Face priority functions in the following situations.
• When AF area mode is set to Face priority (default setting) (A 101)
• When scene mode is set to Scene auto selector (A 34), Portrait (A 34), or
Night portrait (A 35)
• When using smart portrait mode (A 47)

1

Frame a picture.
• When the camera detects a face, that face will be
framed by a yellow double border.

• When the camera detects more than one face, operation varies, depending upon the
shooting mode, as follows.
Shooting mode

Faces framed by a double
border

A (auto) mode (Face priority) The face closest to the
camera
Scene mode: Scene auto
* The other faces are
selector, Portrait, Night
framed by a single border.
portrait
The face closest to the
center of the frame
Smart portrait mode
* The other faces are
framed by a single border.

2

The number of faces
to be recognized
Up to 12

Shooting, Playback and Setup Menus

11

Up to 3

Press the shutter-release button halfway.
• Focus will be on the face framed by the double border. The
double border will glow green once focus has been locked.
• When the camera is unable to focus, the double border
will blink. Press the shutter-release button halfway again
and focus.
• Press the shutter-release button the rest of the way
1/125 F2.7
down to take the picture.
• When using smart portrait mode, even if the shutter-release button is not pressed, the
shutter is released automatically if the camera detects that the face framed by the
double border is smiling (Smile timer) (A 49).

103

Shooting Options: The Shooting Menu

B

Shooting, Playback and Setup Menus

104

Notes on Face priority

• In Face priority, if the shutter-release button is pressed halfway when no faces are recognized, AF
area mode will be set to Auto.
• If no face is detected when the shutter-release button is pressed halfway in Portrait or Night
portrait scene mode, or Smart portrait mode, the camera will focus on the subject in the center
focus area.
• Depending on shooting conditions, such as whether or not the subject is facing the camera, faces
may not be detected.
The camera may be unable to detect faces in the following situations:
- When faces are partially hidden by sunglasses or other obstructions
- When faces take up too much or too little of the frame
• When there are multiple people in the frame, the face on which the camera focuses depends on a
variety of shooting conditions, such as whether or not the subject is facing the camera.
• In some rare cases, the subject may not be in focus despite the fact that the double border glows
green (A 25). Should this occur, switch to A (auto) mode and set AF area mode to Manual or
Center, refocus on another subject positioned at the same distance from the camera as the actual
portrait subject, and use focus lock (A 102).
• Images that were taken using face priority will be rotated and displayed automatically according
to the orientation of the faces detected, in full-frame and thumbnail playback modes (excluding
pictures that were shot using Continuous, BSS and Multi-shot 16 (A 98)).

Shooting Options: The Shooting Menu

Functions that Cannot Be Applied Simultaneously
Certain settings in the shooting menu cannot be used with other functions.
Restricted Functions

Setting
Continuous (A 98)

Image mode

Continuous (A 98)

Continuous

Self-timer (A 30)

ISO sensitivity

Continuous (A 98)

Electronic VR

ISO Sensitivity (A 99)

White balance

Color options (A 100)
Continuous (A 98)

Motion detection
ISO sensitivity (A 99)
Blink warning

Continuous (A 98)

Shooting, Playback and Setup Menus

Flash mode

Description
If set to Continuous, BSS, or Multishot 16, the flash cannot be used.
When using Multi-shot 16, Image
mode is fixed at L Normal (2592).
When using the self-timer, the setting is
fixed at Single.
When using Multi-shot 16, ISO
sensitivity is set automatically
according to the brightness.
When ISO sensitivity is set to any
setting other than Auto, Electronic VR
does not function.
When using Black-and-white, Sepia,
or Cyanotype, the White balance
setting is fixed at Auto.
When Multi-shot 16 is selected,
Motion detection is not enabled.
When the option other than Auto is
selected for ISO sensitivity, Motion
detection is disabled.
If set to Continuous, BSS, or Multishot 16, blink warning cannot be used.

105

Playback Options: The Playback Menu
The following options are available in playback mode.
k

A 70

Quick retouch

Easily create retouched copies in which contrast and saturation have been enhanced.
I

A 71

D-Lighting
Enhances brightness and contrast in dark portions of pictures.

e

A 72

Skin softening
Make the subject’s skin appear smoother.

a

A 90

Print set
Select pictures to print and the number of copies for each.

b

A 108

Slide show

Shooting, Playback and Setup Menus

View pictures stored in the internal memory or on a memory card in an
automatic slide show.
c

A 109

Delete
Delete all or selected pictures.

A 109

d Protect
Protect selected pictures from accidental deletion.
f

A 110

Rotate image
Change the orientation of pictures.

g

A 73

Small picture
Create a small copy of the current picture.

E

A 66

Voice memo
Record voice memos for pictures after they are taken.

h

A 110

Copy
Copy files between memory card and internal memory.

Displaying the Playback Menu
Enter the playback mode by pressing the c button (A 26).
Press the d button to display the playback menu.
15/11/2009 15:30
0004.JPG

Playback menu
Quick retouch
D-Lighting
Skin softening
Print set
Slide show

4

4

• Use the multi selector to choose and apply settings (A 9).
• To exit the playback menu, press the d button.

106

Exit

Playback Options: The Playback Menu

Selecting Pictures
The picture selection screen, as shown at right, will be
displayed with the following menus:
• Playback menu: Print set>Select images
(A 90)
Delete>Erase selected images
(A 109)
Protect (A 109)
Rotate image (A 110)
Copy>Selected images (A 110)
• Setup menu:
Welcome screen (A 115)

Erase selected images

Back

1

Press the multi selector J or K to choose the
desired picture.
• Only one picture can be selected for Rotate image
and Welcome screen. Proceed to step 3.
• Rotate the zoom control to g (i) to switch to full-frame
playback. Rotate the zoom control to f (h) to switch
back to 12-thumbnail display.

2

Press H or I to select ON or OFF (or the
number of copies).

Erase selected images

Back

Shooting, Playback and Setup Menus

Follow the procedures described below to choose the pictures.

Erase selected images

• When ON is selected, a check mark (y) is displayed in
the top left corner of the current picture. Repeat steps 1
and 2 to select additional pictures.
Back

3

Press the k button to apply picture selection.

107

Playback Options: The Playback Menu

b Slide Show
Press the c button (Playback mode) M d (Playback menu) M b Slide show

View pictures stored in the internal memory or on a memory card in an automatic
slide show.

1

Use the multi selector to choose Start and
press the k button.

Slide show
Pause

Shooting, Playback and Setup Menus

• To change the interval between pictures, choose
Start
Frame intvl, select the desired interval time, and press
Frame intvl
the k button before choosing Start.
Loop
• To repeat the slide show automatically, enable Loop
Exit
and press the k button before choosing Start. The
check mark (w) will be added to the loop option when enabled.

2

The slide show begins.
While the slide show is in progress, the following
operations are available:
• Press the multi selector K to display the subsequent
picture or J to display the previous picture. Hold
down either button to fast forward or rewind.
• Press the k button to pause the slide show.

3

Choose End or Restart.
• When the slide show ends or is paused, choose End
and press the k button to return to the playback
menu, or choose Restart to play the slide show again.

Pause

Restart
End
Frame intvl

B
108

Notes on Slide Show

• Only the first frame of movies (A 78) included in slide shows is displayed.
• Even if Loop is selected, the maximum playback duration for a slide show is 30 minutes (A 124).

Playback Options: The Playback Menu

c Delete
Press the c button (Playback mode) M d (Playback menu) M c Delete

Delete selected pictures or all pictures.
Erase selected images
Delete selected pictures (See “Selecting Pictures” (A 107) for more information).
Erase all images
Delete all pictures.

B

Notes on Deletion

d Protect
Press the c button (Playback mode) M d (Playback menu) M d Protect

Protect selected pictures from accidental deletion.
Choose pictures in the picture selection screen to apply the protect option
(Selecting Pictures ➝ A 107).
Note, however, that formatting the camera’s internal memory or the memory card
will permanently erase protected files (A 125).
Protected pictures are recognized by the s icon (A 7, 50).

Shooting, Playback and Setup Menus

• Once deleted, pictures cannot be recovered. Transfer important images to a computer before
deletion.
• Pictures marked with the s icon are protected and cannot be deleted.

109

Playback Options: The Playback Menu

f Rotate Image
Press the c button (Playback mode) M d (Playback menu) M f Rotate image

After shooting, set the orientation in which pictures are displayed during playback.
Pictures can be rotated 90° clockwise or counterclockwise.
Pictures that were recorded in the portrait (vertical) orientation can be rotated up
to 180° in either direction.
Select a picture in the picture selection screen (A 107), and press the k button
to display the Rotate image screen. Press the multi selector J or K to rotate the
picture 90°.
Shooting, Playback and Setup Menus

Rotate image

Back

Rotate image

Rotate image

Rotate

Back

Rotate

Back

Rotate 90°
counterclockwise

Press the k button to set the orientation displayed, and save the orientation data
with the picture.

h Copy
Press the c button (Playback mode) M d (Playback menu) M h Copy

Copy pictures between the internal memory and a memory card.

1

Select an option from the copy screen using
the multi selector and press the k button.
• q: Copy pictures from internal memory to
memory card.
• r: Copy pictures from memory card to internal
memory.

110

Rotate

Rotate 90° clockwise

Copy

Exit

Playback Options: The Playback Menu

2

Select a copy option and press the k button.
• Selected images: Copy pictures selected from the
picture selection screen (A 107).
• All images:
Copy all pictures.

Camera to card
Selected images
All images

Exit

Notes on Copying Pictures

• JPEG-, AVI-, and WAV-format images can be copied. Images recorded in any other formats cannot
be copied.
• If voice memos (A 66) are attached to pictures selected for copying, voice memos are copied
with the pictures.
• Pictures taken with another make of camera or that have been modified on a computer cannot be
copied.
• When copying pictures for which Print set (A 90) options are enabled, the print set settings will
not be copied. However, when copying pictures for which Protect (A 109) is enabled, the
protect setting will be copied.
• Pictures copied from the internal memory or a memory card cannot be displayed in auto sort
mode (A 56).
• Even if a picture added to favorites folder (A 61) is copied, the contents of the favorites folder will
not be copied.

C

Shooting, Playback and Setup Menus

B

Memory contains no images. Message

If there are no pictures stored on the memory card when playback mode is applied, the message
Memory contains no images. will be displayed. Press the d button to display the copy option
screen, and copy the pictures stored in the camera’s internal memory to the memory card.

D

More Information

See “File and Folder Names” (A 132) for more information.

111

Basic Camera Setup: The Setup Menu
The setup menu contains the following options.
a
c
d
e

Shooting, Playback and Setup Menus

f
w
U

h
u
i
k
l/m
n
o
d

p

112

Menus
A 114
Choose how menus are displayed.
Welcome screen
A 115
Select screen displayed when the camera is turned on.
Date
A 116
Set the camera clock and choose home and destination time zones.
Monitor settings
A 119
Choose whether or not to display information in the monitor, whether or not
pictures are shown on the display for review after taking them, and set the
monitor brightness.
Date imprint
A 120
Imprint date on pictures.
Electronic VR
A 121
Specify the electronic vibration reduction setting for taking still pictures.
Motion detection
A 122
Adjust the motion detection setting to reduce the effects of subject movement
and camera shake when taking still pictures.
AF assist
A 123
Enable or disable AF-assist illumination.
Digital zoom
A 123
Adjust settings for using digital zoom.
Sound settings
A 124
Adjust sound settings.
Auto off
A 124
Set the time before the camera enters standby mode to save power.
Format memory/Format card
A 125
Format internal memory or memory card.
Language
A 126
Choose the language used for camera monitor display.
Video mode
A 126
Adjust settings necessary for connection to television.
Blink warning
A 126
Choose whether or not to detect blinking human subjects when shooting
pictures using face priority.
Reset all
A 128
Restore camera settings to default values.

Basic Camera Setup: The Setup Menu
r

A 130

Firmware version
Display camera firmware version.

Displaying the Setup Menu
Choose z tab in the menu screen.

1

Press the d button to display the menu
screen.

Shooting menu
Image mode
White balance
Continuous
ISO sensitivity
Color options
Exit

• When using scene mode

Image mode
High (4000 )
Normal (4000)
Normal (3264)
Normal (2592)
Normal (2048)

Shooting, Playback and Setup Menus

• When using A (auto) mode, smart portrait mode,
playback mode, and movie mode

Exit

2

Press the multi selector J.
• For information on using the multi selector, see “The
Multi Selector” (A 9).
• Tab will be selectable.

Shooting menu
Image mode
White balance
Continuous
ISO sensitivity
Color options
Exit

3

Press H or I to select the z tab.

Set up
Menus
Welcome screen
Date
Monitor settings
Date imprint
Exit

113

Basic Camera Setup: The Setup Menu

4

Press K or the k button.

Set up

• The setup menu items are selectable.
• Use the multi selector to choose and apply settings
(A 9).
• To exit the setup menu, press the d button or J to
select other tabs.

Menus
Welcome screen
Date
Monitor settings
Date imprint
Exit

a Menus
Shooting, Playback and Setup Menus

Press the d button M z (Setup menu) (A 113) M a Menus

Choose how menus are displayed.
Text (default setting)
Menus are displayed in list format.

Set up
Menus
Welcome screen
Date
Monitor settings
Date imprint
Exit

Icons
All menu items can be displayed in a single page.

Menu names
Menus

Exit

114

Basic Camera Setup: The Setup Menu

c Welcome Screen
Press the d button M z (Setup menu) (A 113) M c Welcome screen

You can select the welcome screen to be displayed when the camera is turned on.

Shooting, Playback and Setup Menus

None (default setting)
No welcome screen will be displayed.
COOLPIX
Displays a welcome screen.
Select an image
Select a picture in the internal memory or on the memory card for the welcome
screen. Choose a picture in the picture selection screen (A 107) and press the k
button.
As the selected image is stored in the camera, the image will appear in the welcome
screen even if the original picture is deleted.
• Pictures taken at an Image mode setting of 16:9 (A 94), and copies created at
a size of 320 × 240 or smaller using the small picture (A 73) or crop (A 74)
function, cannot be used.

115

Basic Camera Setup: The Setup Menu

d Date
Press the d button M z (Setup menu) (A 113) M d Date

Set the camera’s internal clock.
Date

Shooting, Playback and Setup Menus

Set the camera clock to the current date and time.
Use the multi selector to set the date and time.
• Highlight an item (day, month, year, hour, minute, and the order in which day,
month, and year are displayed): Press J or K.
• Edit the highlighted item: Press H or I.
• Finish setting: After selecting the order in which the day, month, and year are
displayed, press the k button (A 17).
Time zone
w (home time zone) can be specified and daylight saving enabled or disabled from
Time zone options. When x (travel destination) is selected, the time difference
(A 118) is automatically calculated and the date and time in the selected region
are recorded. Useful when travelling.

Setting Travel Destination Time Zone

1

Use the multi selector to choose Time zone
and press the k button.
• The Time zone menu is displayed.

Date

15/11/2009 15:30
Date
Time zone
Exit

2

Choose x Travel destination and press the
k button.
• The date and time displayed on the monitor change
according to the region currently selected.

Time zone

15/11/2009 15:30
London, Casablanca
Home time zone
Travel destination
Exit

116

Basic Camera Setup: The Setup Menu

3

Press K.
• The time zone selection screen is displayed.

Time zone

15/11/2009 15:30
London, Casablanca
Home time zone
Travel destination
Exit

4

Press J or K to choose the travel destination
region (time zone).

11:30

- 04:00

EDT:
New York
Toronto
Lima

B

Shooting, Playback and Setup Menus

• If the daylight saving time is in effect, press H to turn
on the daylight saving time option. When the option is
enabled, W is displayed at the top of the monitor, and
the time is advanced one hour. To turn off the daylight
Back
saving time option, press I.
• Press the k button to choose the travel destination time zone.
• While the travel destination time zone is selected, the Z icon will be displayed in the
monitor when the camera is in shooting mode.

The Clock Battery

The camera’s internal clock uses a backup battery that is independent from the camera’s battery. The
clock battery charges when the main battery is installed or an AC adapter is connected, and can
provide several days of backup power after about ten hours of charging.

C

w (Home Time Zone)

• To switch to the home time zone, choose w Home time zone in step 2 and press the k button.
• To change the home time zone, choose w Home time zone in step 2 and perform steps 3 and 4,
to set the home time zone.

C

Daylight Saving Time

When daylight saving time starts or ends, turn the daylight saving time option on or off from the
time zone selection screen displayed in step 4.

D

Imprinting the Date on Pictures

After setting the date and time, set the Date imprint setting in the setup menu (A 120). Once
Date imprint is set, the shooting date and time can be imprinted on the image data when taking
pictures.

117

Basic Camera Setup: The Setup Menu

D

Time Zones

The camera supports the time zones listed below. For time differences not listed below, set the
camera clock to local time.
UTC +/–

Shooting, Playback and Setup Menus

118

Location

UTC +/–

Location

–11

Midway, Samoa

+1

Madrid, Paris, Berlin

–10

Hawaii, Tahiti

+2

Athens, Helsinki, Ankara

–9

Alaska, Anchorage

+3

Moscow, Nairobi, Riyadh,
Kuwait, Manama

–8

PST (PDT): Los Angeles, Seattle,
Vancouver

+4

Abu Dhabi, Dubai

–7

MST (MDT): Denver, Phoenix

+5

Islamabad, Karachi

–6

CST (CDT): Chicago, Houston,
Mexico City

+5.5

–5

EST (EDT): New York, Toronto,
Lima

+6

–4

Caracas, Manaus

+7

Bangkok, Jakarta

–3

Buenos Aires, Sao Paulo

+8

Beijing, Hong Kong, Singapore

–2

Fernando de Noronha

–1

Azores

+10

Sydney, Guam

±0

London, Casablanca

+11

New Caledonia

+12

Auckland, Fiji

+9

New Delhi
Colombo, Dhaka

Tokyo, Seoul

Basic Camera Setup: The Setup Menu

e Monitor Settings
Press the d button M z (Setup menu) (A 113) M e Monitor settings

The following settings are available.
Photo info

Photo Info
The following display options are available.
See “The Monitor” (A 6) for information on indicators in the monitor.
Shooting mode

Playback mode
15/11/2009 15:30
0004.JPG

Show info
4

11

4

Shooting, Playback and Setup Menus

Choose information displayed in the monitor during shooting and playback mode.
Image review
• On (default setting): Picture is automatically displayed in the monitor
immediately after it is taken and the monitor display returns to shooting mode.
• Off: Picture is not displayed after it is taken.
Brightness
Choose from five settings for monitor brightness. The default setting is 3.

Auto info
The current settings or operation guide is displayed for a few seconds, as in
(default setting) Show info above. After a few seconds, display will be the same as Hide info.

Hide info

15/11/2009 15:30
0004.JPG

Framing grid +
Auto info

11

In A (auto) mode, a framing grid is displayed to help
frame pictures; other current settings or operation
guide is displayed for a few seconds, as in Auto info
above. In other shooting modes, the current settings
or operation guide is displayed, as in Auto info above.

4

4

The current settings or
operation guide is displayed,
as in Auto info above.

119

Basic Camera Setup: The Setup Menu

f Date Imprint
Press the d button M z (Setup menu) (A 113) M f Date imprint

The shooting date and time can be imprinted in
pictures at the time of shooting. This information can
be printed even from printers that do not support
printing of date and time (A 92).
15.11.2009

Off (default setting)
Shooting, Playback and Setup Menus

Date and time are not imprinted on pictures.
Date
The date is imprinted in pictures.
Date and time
The date and time are imprinted in pictures.

At settings other than Off, the icon for the current setting is displayed in the
monitor (A 6).

B

Date Imprint

• Imprinted dates form a permanent part of image data and cannot be deleted. Date cannot be
imprinted on pictures after they are taken.
• Dates imprinted at an Image mode setting (A 94) of TV screen (640) may be difficult to read.
Choose PC screen (1024) or larger when using date imprint.
• The date is recorded using the format selected in the setup menu’s Date item (A 16, 116).
• The date is not imprinted in the following situations:
- When using the Panorama assist scene mode
- Movie mode

C
120

Date Imprint and Print Set

When printing from DPOF-compatible printers which support printing of shooting date and photo
information, the date and information can be printed on pictures without date and time imprinted
on them, using options in the Print set menu (A 90).

Basic Camera Setup: The Setup Menu

w Electronic VR
Press the d button M z (Setup menu) (A 113) M w Electronic VR

Choose whether to use electronic VR (vibration reduction) when taking still
pictures.
Auto

Off (default setting)
Electronic VR is disabled.

When Auto is selected, R appears on the monitor (A 6), and electronic VR is
applied depending on shooting conditions.

B

Notes on Electronic Vibration Reduction

• Electronic VR is disabled while the flash is used, except when using slow sync mode. Note that
Electronic VR is disabled even when the flash mode is slow sync with red-eye reduction.
• If the exposure period exceeds a certain period of time, Electronic VR will not function.
• Electronic VR does not function when ISO sensitivity is set to any setting other than Auto.
• Electronic VR does not function when using the following scene modes.
- Sports (A 35)
- Night portrait (A 35)
- Dusk/dawn (A 37)
- Night landscape (A 37)
- Museum (A 38)
- Fireworks show (A 39)
- Backlight (A 39)
• The effectiveness of Electronic VR decreases as camera shake increases.
• Pictures taken using motion detection may be somewhat grainy.

D

Shooting, Playback and Setup Menus

When all of the following conditions are met while taking still pictures, electronic VR
is applied and the effects of camera shake are reduced.
• The flash is turned off or set to slow sync mode.
• The shutter speed is slow.
• The Continuous setting is set to Single.
• When the subject is dark.

Electronic VR for Movies

To compensate for vibration while shooting a movie, go to the movie menu (A 76) and enable
Electronic VR (A 77).

121

Basic Camera Setup: The Setup Menu

U Motion Detection
Press the d button M z (Setup menu) (A 113) M U Motion detection

Enable motion detection to reduce the effects of subject movement and camera
shake when shooting still pictures.
Auto (default setting)

Shooting, Playback and Setup Menus

When the camera detects the camera shake or subject movement, the shutter
speed will be increased for reducing the effects of them.
However, motion detection does not function in the following situations.
• When the flash mode is set to m (fill flash)
• When ISO sensitivity (A 99) is set to Fixed range auto or ISO sensitivity is
fixed at a particular value in A (auto) mode
• When Multi-shot 16 (A 98) is enabled
• In the following scene modes: Dusk/dawn (A 37) and Fireworks show
(A 39)
Off
Motion detection is not enabled.

The motion detection setting can be confirmed in the monitor while shooting
(A 6, 21).
The motion detection icon will glow green when the camera detects any vibration
and increases the shutter speed. When Off is selected, the icon for the current
setting is not displayed.

B

122

Notes on Motion Detection

• Motion detection may be unable to completely eliminate the effects of the subject movement
and camera shake in some situations.
• Motion detection may not function if the subject exhibits significant movement or is too dark.
• Pictures taken using motion detection may be somewhat grainy.

Basic Camera Setup: The Setup Menu

h AF Assist
Press the d button M z (Setup menu) (A 113) M h AF assist

Enable or disable AF-assist illumination.
Auto (default setting)
AF-assist illumination will be used to assist the focus operation when the subject is
poorly lit. The illuminator has a range of about 1.9 m (6 ft. 3 in.) at the maximum
wide-angle position and about 1.1 m (3 ft. 7 in.) at the maximum telephoto
position. However, note that for some scene modes, AF-assist illumination turns
off automatically (A 34 to 40) even if Auto is set.
Off

u Digital Zoom
Press the d button M z (Setup menu) (A 113) M u Digital zoom

Adjust settings for using digital zoom.
On (default setting)

Shooting, Playback and Setup Menus

Disable this function. The camera may be unable to focus if lighting is poor.

When the camera is zoomed in to the maximum optical zoom position, rotating the
zoom control to g (i) triggers digital zoom (A 23).
Off
Digital zoom will not be activated (except when shooting a movie).

B

Notes on Digital Zoom

• When digital zoom is in effect, AF area mode is set to Center (A 101).
• Digital zoom cannot be used in the following situations.
- When Scene auto selector, Portrait, or Night portrait is selected in scene mode
- When smart portrait mode is selected
- When Multi-shot 16 (A 98) is selected
- Just before recording a movie (Up to 2× zoom can be activated while recording movies)

123

Basic Camera Setup: The Setup Menu

i Sound Settings
Press the d button M z (Setup menu) (A 113) M i Sound settings

Adjust the following sound settings.
Button sound
Turn button sound On or Off.
When On (default setting) is selected, a beep will sound once when operations are
completed successfully, twice when focus has been locked, and three times when
an error is detected. Start-up sound will also play when the camera is turned on.
Shutter sound
Shooting, Playback and Setup Menus

Choose shutter sound from On (default setting) or Off.

k Auto Off
Press the d button M z (Setup menu) (A 113) M k Auto off

When the camera is on and a period of time passes without any operations having
been performed, the camera will enter standby mode (A 15) to save power.
Once the camera has entered standby mode, the power-on lamp will blink, and if
no operations are performed for another three minutes, the camera will turn off.
Choose the time allowed to elapse before the camera enters standby mode if no
operations are performed from 30 s, 1 min (default setting), 5 min, and 30 min.

C

Canceling Standby Mode

Cancel standby mode and reactivate the monitor by pressing any of the following buttons.
• the power switch
• the shutter-release button
• the A button
• the c button

C
124

Note on Auto Off

Regardless of the option selected, the monitor will remain on for three minutes when menus are
displayed, a maximum of 30 minutes during slide show playback, and 30 minutes when the AC
adapter is connected.

Basic Camera Setup: The Setup Menu

l Format Memory/m Format Card
Press the d button M z (Setup menu) (A 113) M l Format memory/m Format card

Use this option to format the internal memory or a memory card.

Formatting the Internal Memory
To format the internal memory, remove the memory
card from the camera.
The Format memory option appears in the setup
menu.

Format memory
All images will
be deleted! OK?
No
Format

Formatting a Memory Card
When the memory card is inserted in the camera, the
Format card option appears in the setup menu.

Format card
All images will
be deleted! OK?
No
Format
Exit

B

Shooting, Playback and Setup Menus

Exit

Formatting Internal Memory and Memory Cards

• Formatting the internal memory or memory cards permanently deletes all data. Be sure to transfer
important pictures to a computer before formatting.
• Formatting the internal memory or memory card restores favorites folder icon settings (A 60) to
the default setting (displayed as number).
• Do not turn the camera off, or open the battery-chamber/memory card slot cover during
formatting.
• The first time you insert the memory cards used in other devices into the COOLPIX S570, be sure to
format them using this camera.

125

Basic Camera Setup: The Setup Menu

n Language
Press the d button M z (Setup menu) (A 113) M n Language

Choose one of 24 languages for display of camera menus and messages.

Shooting, Playback and Setup Menus

Czech

Polish

Danish

Portuguese

German

Russian

(default setting)

Finnish

Spanish

Swedish

Greek

Turkish

French

Simplified Chinese

Indonesian

Traditional Chinese

Italian

Japanese

Hungarian

Korean

Dutch

Thai

Norwegian

Arabic

o Video Mode
Press the d button M z (Setup menu) (A 113) M o Video mode

Adjust settings for connection to a television. Choose from NTSC and PAL.

d Blink Warning
Press the d button M z (Setup menu) (A 113) M d Blink warning

Choose whether or not blinking eyes are detected when using face priority
(A 103) in the following shooting modes.
• A (auto) mode (when AF area mode is set to Face priority (A 101))
• When scene mode is set to Scene auto selector (A 34), Portrait (A 34), or
Night portrait (A 35)

126

Basic Camera Setup: The Setup Menu
On
When the camera detects that one or more human subjects may have closed eyes
shortly after recognizing the faces and shooting them, the blink warning screen will
appear in the monitor.
The face of a portrait subject, whose eyes may have been closed when the shutter
was released, is framed by a yellow border. Should this occur, check the picture and
decide whether or not another picture should be taken.
See “Operating the Blink Warning Screen” (A 127) for more information.
Off (default setting)
Blink warning is not enabled.

B

Note on Blink warning

Operating the Blink Warning Screen
The following operations can be performed when the
Did someone blink? screen is displayed.
If no operations are performed for a few seconds, the
camera automatically returns to shooting mode.

Did someone blink?

Exit

Option

Use

Enlarge and display
the detected face

g (i)

Switch to full-frame
playback

f (h)

Rotate the zoom control to g (i).
Rotate the zoom control to f (h).
If the camera detects more than one human
subjects with their eyes closed, press H, I, J, or K
during the enlarged display to switch over the faces.

Select the face to
display
Delete the picture

Description

Shooting, Playback and Setup Menus

When continuous is set to Continuous, BSS, or Multi-shot 16, blink warning does not function.

l

Press the l button.

k
Switch to shooting
mode

Press the k button or the shutter-release button.

127

Basic Camera Setup: The Setup Menu

p Reset All
Press the d button M z (Setup menu) (A 113) M p Reset all

When Reset is selected, the camera’s settings will be restored to their default
values.
Pop-up Menu
Option

Default value

Shooting, Playback and Setup Menus

Flash mode (A 28)

Auto

Self-timer (A 30)

Off

Macro mode (A 31)

Off

Exposure compensation (A 32)

0.0

Scene Mode
Option

Default value

Scene mode setting in the shooting-mode
selection menu (A 33)

Scene auto selector

White balance in Food mode (A 43)

Center

Smart portrait Menu
Option

Default value

Skin softening (A 48)

Normal

Smile timer (A 49)

On

Blink proof (A 49)

Off

Movie Menu
Option

128

Default value

Movie options (A 76)

TV movie 640P

Autofocus mode (A 77)

Single AF

Electronic VR (A 77)

Off

Basic Camera Setup: The Setup Menu

Shooting Menu
Option

Default value

Image mode (A 94)

I Normal (4000)

White balance (A 96)

Auto

Continuous (A 98)

Single

ISO sensitivity (A 99)

Auto

Color options (A 100)

Standard color

AF area mode (A 101)

Face priority

Setup Menu
Default value
Text

Welcome screen (A 115)

None

Photo info (A 119)

Auto info

Image review (A 119)

On

Brightness (A 119)

3

Date imprint (A 120)

Off

Electronic VR (A 121)

Off

Motion detection (A 122)

Auto

AF Assist (A 123)

Auto

Digital zoom (A 123)

On

Button sound (A 124)

On

Shutter sound (A 124)

On

Auto off (A 124)

1 min

Blink warning (A 126)

Off

Shooting, Playback and Setup Menus

Option
Menus (A 114)

129

Basic Camera Setup: The Setup Menu

Others
Option

Default value

Paper size (A 86, 87)

Default

Slide show (A 108)

3s

Shooting, Playback and Setup Menus

• Choosing Reset all also clears the current file number (A 132) from the
memory. Numbering will continue from the lowest number available. To reset
file numbering to “0001”, delete all pictures (A 109) before selecting Reset all.
• The following menu settings will remain unaffected when menus are reset with
Reset all.
Shooting menu: Preset manual data (A 97) acquired for White balance
Setup menu: Picture selected for Welcome screen (A 115), Date (A 116),
Language (A 126), and Video mode (A 126)

r Firmware Version
Press the d button M z (Setup menu) (A 113) M r Firmware version

View the current camera firmware version.
COOLPIX S570 Ver.x.x

Back

130

Technical Notes

Optional Accessories
Rechargeable battery

Rechargeable Li-ion Battery EN-EL10

Battery charger

Battery Charger MH-63
AC Adapter EH-62D

1

2

3

AC adapter
Check that the AC adapter cord has been inserted correctly
into the battery chamber before closing the batterychamber/memory card slot cover. If part of the cord has not
been inserted into the chamber the cover may be damaged
during closure.
USB cable

USB Cable UC-E6

AV cable

Audio Video Cable EG-CP14

Approved Memory Cards

1
2

SanDisk

512 MB, 1 GB, 2 GB1, 4 GB2, 8 GB2, 16 GB2

TOSHIBA

512 MB, 1 GB, 2 GB1, 4 GB2, 8 GB2, 16 GB2

Panasonic

512 MB, 1 GB, 2 GB1, 4 GB2, 8 GB2, 16 GB2

Lexar

1 GB, 2 GB1, 4 GB2, 8 GB2

Technical Notes

The following Secure Digital (SD) memory cards have been tested and approved
for use in this camera.
All cards of the designated make and capacity can be used, regardless of speed.

If the memory card will be used with a card reader or similar device, check that the device
supports 2 GB cards.
SDHC compliant.
If the memory card will be used with a card reader or similar device, check that
device supports SDHC.

Operation is not guaranteed with other makes of card. Contact the manufacturer
for details on the above cards.

131

File and Folder Names
Pictures, movies, and voice memos are assigned file names as follows.

DSCN0001.JPG
Identifier (not shown on camera monitor)
Original still pictures (voice
memo attachment
included), movies
Small copies (voice memo
attachment included)
Cropped copies (voice
memo attachment included)
Quick Retouch, D-Lighting,
and Skin softening copies
(voice memo attachment
included)

Technical Notes

132

DSCN

Extension (signifies the file type)
Still pictures
Movies
Voice memos

.JPG
.AVI
.WAV

SSCN
RSCN

File number (assigned automatically in
ascending order, starting with “0001”)

FSCN

• Files are stored in folders named with a folder number followed by a fivecharacter identifier: “P_” plus a three-digit sequence number for pictures shot
using Panorama assist (e.g. “101P_001”; A 45), and “NIKON” for all other
pictures (e.g. “100NIKON”). When the number of files within a folder reaches
9999, a new folder will be created. File numbers will be assigned automatically
starting with “0001”.
• Voice memo file names have the same identifier and file number as the picture
to which the voice memo is attached.
• Files copied using Copy > Selected images is copied to the current folder,
where they are assigned new file numbers in ascending order starting from the
largest file number in memory. Copy > All images copies all folders from the
source medium; file names do not change but new folder numbers are
assigned in ascending order, starting from the largest folder number on the
destination medium (A 110).
• A single folder can hold up to 200 pictures; if the current folder already contains
200 pictures, a new folder, named by adding one to the current folder name,
will be created the next time a picture is taken. If the current folder is numbered
999 and contains 200 pictures, or a picture is numbered 9999, no further
pictures can be taken until the internal memory or memory card is formatted
(A 125), or a new memory card is inserted.

Caring for the Camera
To ensure continued enjoyment of this Nikon product, observe the following
precautions when using or storing the device.

B

Keep dry

The device will be damaged if immersed in water or subjected to high humidity.

B

Do not drop

The product may malfunction if subjected to strong shock or vibration.

B

Handle the lens and all moving parts with care

Do not apply force to the lens, lens cover, monitor, memory card slot or battery chamber. These
parts are easily damaged. Applying force to the lens cover could result in camera malfunction or
damage to the lens. Should the monitor break, care should be taken to avoid injury caused by
broken glass and to prevent the liquid crystal from the display touching the skin or entering the eyes
or mouth.

B

Do not point the lens at strong light sources for extended periods

Avoid pointing the lens at the sun or other strong light sources for extended periods when using or
storing the camera. Intense light may cause deterioration of the CCD image sensor, producing a
white blur effect in photographs.

B

Keep away from strong magnetic fields

B

Avoid sudden changes in temperature

Sudden changes in temperature, such as when entering or leaving a heated building on a cold day,
can cause condensation to form inside the device. To prevent condensation, place the device in a
carrying case or a plastic bag before exposing it to sudden changes in temperature.

B

Technical Notes

Do not use or store this device in the vicinity of equipment that generates strong electromagnetic
radiation or magnetic fields. Strong static charges or the magnetic fields produced by equipment
such as radio transmitters could interfere with the monitor, damage data stored on the memory
card, or affect the product’s internal circuitry.

Turn the product off before removing or disconnecting the power source

Do not remove the battery while the product is on, or while images are being recorded or deleted.
Forcibly cutting power in these circumstances could result in loss of data or in damage to product
memory or internal circuitry.

133

Caring for the Camera

C

Technical Notes

134

The Battery

• Check the battery level when taking the camera out, and charge the battery if necessary. Do not
continue charging once the battery is fully charged, as this will result in reduced battery
performance. If possible, carry a fully-charged spare battery when taking pictures on important
occasions.
• Do not use the battery at ambient temperatures below 0 °C (32 °F) or above 40 °C (104 °F). Failure
to observe this precaution could damage the battery or impair its performance.
• Charge indoors at an ambient temperature between 5 and 35 °C (41 to 95 °F). When the battery
temperature is between 0 and 10 °C (32 to 50 °F) or 45 to 60 °C (113 to 140 °F), the chargeable
capacity may decrease. The battery will not charge if its temperature is below 0 °C (32 °F) or above
60 °C (140 °F).
• If an exhausted battery is used at a low temperature, the camera may not turn on. Be sure that the
battery is fully charged and spare batteries are prepared before heading outside to take pictures in
cold weather. Keep spare batteries in a warm place and exchange as necessary. Once warmed, a
cold battery that could not be used temporarily due to lowered performance may recover some of
its charge.
• Should the battery terminals become dirty, the camera may not turn on due to poor contact. Wipe
the terminals off with a clean, dry cloth before use.
• If the battery will not be used for some time, insert it in the camera and run it flat before removing
it for storage. Attach the included terminal cover to the battery and store it in a cool location with
an ambient temperature of 15 to 25 °C (59 to 77 °F). Do not store the battery in hot or extremely
cold locations.
• While the battery is in storage, charge it at least once every six months and then use the camera to
run it flat again before storing it in a cool location.
• Always remove the battery from the camera or battery charger when it is not being used. Left
installed, minute amounts of current flow even when unused, and the battery may become
excessively drained and no longer function.
• A marked drop in the time a fully-charged battery retains its charge, when used at room
temperature, indicates that the battery needs to be replaced. Purchase a new battery.
• Replace the battery when it no longer holds a charge. Used batteries are a valuable resource.
Please recycle used batteries in accordance with local regulations.

Caring for the Camera

Cleaning

Lens

Avoid touching glass parts with your fingers. Remove dust or lint with a blower
(typically a small device with a rubber bulb attached to one end that is
pumped to produce a stream of air out the other end). To remove fingerprints
or other stains that cannot be removed with a blower, wipe the lens with a soft
cloth, using a spiral motion that starts at the center of the lens and working
toward the edges. If this fails, clean the lens using a cloth lightly dampened
with commercial lens cleaner.

Monitor

Remove dust or lint with a blower. To remove fingerprints and other stains,
clean the monitor with a soft, dry cloth, being careful not to apply pressure.

Body

Use a blower to remove dust, dirt or sand, then wipe gently with a soft, dry
cloth. After using the camera at the beach or seaside, wipe off any sand or salt
with a dry cloth lightly dampened with fresh water, then dry thoroughly. Note
that foreign matter inside the camera could cause damage not covered by the
warranty.

Do not use alcohol, thinner, or other volatile chemicals.

Technical Notes

135

Caring for the Camera

Storage
Turn the camera off when not in use. Check that the power-on lamp is off before
putting the camera away. Remove the battery if the camera will not be used for an
extended period. Do not store the camera with naphtha or camphor moth balls, or
in any of the following locations:
• Next to equipment that produces strong electromagnetic fields, such as
televisions or radios
• Exposed to temperatures below -10 °C (14 °F) or above 50 °C (122 °F)
• Poorly ventilated or subject to humidities of over 60 %
To prevent mold or mildew, take the camera out of storage at least once a month.
Turn the camera on and release the shutter a few times before putting the camera
away again.

Technical Notes

C

Notes on the Monitor

• The monitor may contain a few pixels that are always lit or that do not light. This is a characteristic
common to all TFT LCD displays, and does not indicate a malfunction. Images recorded using the
product will not be affected.
• Images in the monitor may be difficult to see under bright lighting.
• The monitor is lit by an LED backlight. Should the monitor begin to dim or flicker, contact your
Nikon-authorized service representative.

C

136

Notes on Smear

White or colored streaks of light may be visible in the monitor with framing of bright subjects. This
phenomenon, known as “smear,” occurs when extremely bright light strikes the image sensor. This is
due to characteristics of the image sensor and does not indicate a malfunction. Smear may also
cause partial discoloration in monitor display with shooting.
Smear does not affect recorded images except when shooting with Continuous set to Multi-shot
16 and when recording movies. When shooting in these modes, avoiding bright objects such as the
sun, reflections of the sun, and electric lights is recommended.

Error Messages
The following table lists the error messages and other warnings displayed in the
monitor, as well as the solutions for dealing with them.
Problem
Clock not set.
Battery running low.

N
Battery exhausted.
P
Battery temperature
high

Battery exhausted.

Q (● blinks red)

Camera cannot focus.

P
Please wait for the
camera to finish
recording.
N
Memory card is write
protected.
P
This card cannot be
used.
P
This card cannot be
read.

Camera cannot perform
other operations until
recording is complete.

Battery temperature is
high.

Write-protect switch is in
“lock” position.
Error accessing memory
card.

Solution
Set clock.
Prepare to charge or
change battery.
Charge or change battery.

A
116
12

Turn off camera, and allow
battery to cool down
before resuming use. After
5 seconds, this message
will disappear, the monitor
will turn off, and the
power-on lamp and flash
lamp will blink rapidly.
After the lamps blink for
three minutes, the camera
will turn off automatically.
Pressing the power switch
also turns off the camera.
• Refocus.
• Use focus lock.
Wait until message clears
from display automatically
when recording is
complete.
Slide write-protect switch
to “write” position.

15

12

24, 25
102
25

19

Technical Notes

Display
O (blinks)
B

• Use approved card.
131
• Check that connectors
18
are clean.
• Confirm that memory
18
card is correctly inserted.

137

Error Messages
Solution
A
All data stored on the
19
memory card will be
deleted. If there is any data
on the card that you want
to keep, select No, and
backup the data to a
computer before
formatting the memory
card. To format the
memory card, select Yes
and press the k button.
N
Memory card is full.
• Choose smaller image size. 94
Out of memory.
• Delete pictures.
26, 78,
109
• Insert new memory card. 18
• Remove memory card
18
and use internal
memory.
P
Error occurred while
Format internal memory or 125
Image cannot be
recording picture.
memory card.
saved.
Camera has run out of file Replace the memory card, 132
numbers.
or format the internal
memory/memory card.
Picture cannot be used for The following pictures
115
welcome screen.
cannot be used.
• Pictures taken at an
Image mode setting of
16:9.
• Pictures created using
the small picture or crop
functions that are 320 ×
240 or smaller in size.
There is insufficient space
Delete pictures from
109
to save a copy.
destination.
P
The image file cannot have • Choose an image that
67
Sound file cannot be
any voice memos attached
was taken using this
saved.
to it.
camera.
• Voice memos cannot be –
attached onto movies.
N
Over 200 pictures have
• Remove some pictures
62
Album is full. No
already been added to
from favorites folder.
further pictures can be favorites folder.
• Add to other favorites
61
added.
folders.
Display
P
Card is not formatted.
Format card?
No
Yes

Technical Notes

138

Problem
Memory card has not been
formatted for use in this
camera.

Error Messages
Display
N
A blink was detected
in the picture just
taken.
N
Image cannot be
modified.

N
Cannot record movie.
N
Memory contains no
images.

Problem
Someone may have had
their eyes closed when the
picture was taken.

Solution
Check the picture in
playback mode.

A
49

Cannot edit selected
picture.

Confirm the conditions
that are required for
editing.
These options cannot be
used with movies.
Choose memory card with
faster write speed.
• Pictures stored in the
internal memory can
only be viewed if no
memory card is inserted.
• To copy files from
internal memory to
memory card, press the
d button to display
the Copy screen, then
copy the files from
internal memory to
memory card.
Select the folder
containing the sorted
pictures.
Playback pictures using
playback mode, list by
date, or favorite pictures
mode.
• Add the picture to
favorites folder.
• Choose the favorites
folder that the picture
has been added.
File cannot be viewed on
this camera. View file using
the computer or any other
devices which was used to
create or edit this file.

68

Time out error while
recording movie.
No pictures in the internal
memory or memory card.

The picture has not been
added to favorites folder.

N
File contains no image
data.
P
This file cannot be
played back.
N
All images are hidden.

File not created with this
camera.

The picture cannot be
–
played back in a slide show.

18
18

56

57

Technical Notes

No pictures are contained
in the folder selected in
auto sort mode.
No pictures can be played
back in auto sort mode.

–

61
62

–

108

139

Error Messages
Display
N
This image cannot be
deleted.
N
Travel destination is in
the current time zone.
Lens error
Q

Problem
Picture is protected.

Solution
Disable protection.

A
109

Destination in same time
zone as home.

–

118

Lens error.

Turn camera off and then
on again. If error persists,
contact retailer or Nikonauthorized service
representative.
Turn camera off and
reconnect cable.

20

Turn camera off, remove
and reinsert battery, and
turn camera on. If error
persists, contact retailer or
Nikon-authorized service
representative.
Check printer. After solving
the problem, select
Resume and press the k
button to resume
printing.*
Load the specified paper,
select Resume and press
the k button to resume
printing.*
Eject the jammed paper,
select Resume and press
the k button to resume
printing.*
Load the specified paper,
select Resume and press
the k button to resume
printing.*
Check ink, select Resume
and press the k button to
resume printing.*
Replace ink, select Resume
and press the k button to
resume printing.*

14, 20

P
USB cable disconnected
Communications error during data transfer to
printer.
System error
Error has occurred in
Q
camera’s internal circuitry.

Technical Notes

PR
Printer error: check
printer status.

Printer error.

PR
Printer error: check
paper

Specified size of paper is
not loaded in printer.

PR
Printer error: paper
jam

Paper has jammed in the
printer.

PR
Printer error: out of
paper

No paper is loaded in
printer.

PR
Ink error.
Printer error: check ink
PR
Running out of ink or ink
Printer error: out of ink cartridge is empty.

140

81, 85

–

–

–

–

–

–

Error Messages
Display
Problem
Solution
A
PR
An error caused by the
Select Cancel and press
–
Printer error: file
image file has occurred.
the k button to cancel
corrupt
printing.
* See the documentation provided with your printer for further guidance and information.

Technical Notes

141

Troubleshooting
If the camera fails to function as expected, check the list of common problems
below before consulting your retailer or Nikon-authorized service representative.
Refer to the page numbers in the right-most column for more information.

Display, Settings and Power Supply
Problem
Monitor is blank.

Monitor is hard to read.

Technical Notes

142

Cause/Solution

A

• Camera is off.
• Battery is exhausted.
• The camera is in standby mode. Press the power
switch, shutter-release button, A button, or c
button.
• When flash lamp blinks red, wait until flash has
charged.
• Camera and computer are connected via USB cable.
• Camera and TV are connected via AV cable.

20
20
15, 21

• Adjust monitor brightness.
• Monitor is dirty. Clean monitor.

119
135

29
81
79

Camera turns off without • Battery is low.
warning.
• Camera has turned off automatically to save power.
• Battery is cold.

20
124
134

Date and time of
• Pictures recorded before clock has been set, and
recording are not correct.
“Date not set” indicator blinks during shooting, will
have time stamp of “00/00/0000 00:00”; movies will
be dated “01/01/2009 00:00”. In calendar display or
list by date mode, pictures are recognized as having
been taken on 01/01/2009. Set the correct time and
date from the Date option in the setup menu.
• Check camera clock regularly against more accurate
timepieces and reset as required.

16, 51

No indicators displayed
in monitor.

Hide info is selected for Photo info.
Select Show info.

119

Date imprint not
available.

Camera clock has not been set.

16,
116

116

Date not appearing on
A shooting mode that does not support date imprint is
pictures even when
selected.
Date imprint is enabled.

120

Camera settings reset.

117

Backup battery is exhausted; all settings were restored
to their default values.

Troubleshooting
Problem

Cause/Solution

Monitor turns off, and
the power-on lamp and
flash lamp blink rapidly.

Battery temperature is high. Turn off camera, and allow
battery to cool down before resuming use. After the
lamps blink for three minutes, the camera will turn off
automatically. Pressing the power switch also turns off
the camera.

A
15

Electronically Controlled Cameras
In extremely rare instances, unusual characters may appear in the monitor and the
camera may stop functioning. In most cases, this phenomenon is caused by a
strong external static charge. Turn the camera off, remove and replace the battery,
then turn the camera on again. In the event of continued malfunction, contact
your retailer or Nikon-authorized service representative. Note that disconnecting
the power source as described above may result in the loss of any data not
recorded to internal memory or the memory card at the time the problem
occurred. Data already recorded will not be affected.

Technical Notes

143

Troubleshooting

Shooting
Problem

A

Technical Notes

No picture taken when shutter- • When camera is in playback mode, press the
release button is pressed.
A button or the shutter-release button.
• When menus are displayed, press the d
button.
• Battery is exhausted.
• When flash lamp blinks, flash is charging.

26

Camera cannot focus.

• The intended subject is one with which
autofocus does not perform well.
• Set AF assist in the setup menu to Auto.
• Focus error. Turn camera off and then on
again.

25

Pictures are blurred.

• Use flash.
• Use electronic vibration reduction or motion
detection.
• Use BSS.
• Use tripod and self-timer.

28
121,
122
98
30

Streaks of light or partial
discoloration appear in the
display.

Smear may occur when the lens is aimed at
bright subjects. When using the multi-shot 16
shooting and movie modes, we recommend
that you avoid shooting when direct sunlight,
reflected sunlight, or electric lights are in the
display.

98, 136

Bright specks appear in
pictures taken with flash.

Flash is reflecting off particles in air. Turn flash
off.

29

Flash does not fire.

• Flash is off.
• Some scene modes that cannot turn on flash
are selected.
• Smart portrait mode selected, with Blink
proof set to On.
• D mode is selected.
• Another function that is set now is restricting
the flash.

28
34

Optical zoom cannot be used while recording
movies.

75

Optical zoom cannot be used.

144

Cause/Solution

10
20
29

123
20

49
75
105

Troubleshooting
Problem
Digital zoom cannot be used.

Cause/Solution

A

Digital zoom is set to Off in the setup menu.
Digital zoom is not available in the following
situations.
• When Scene auto selector, Portrait, or
Night portrait is selected for scene mode.
• When smart portrait mode is selected.
• Just before recording a movie (up to 2× can
be applied while recording movies).
• When Multi-shot 16 is selected for the
Continuous setting.

123

Image mode not available.

Another function that is set now is restricting
Image mode.

105

No sound when shutter is
released.

• Off is selected for Sound settings>Shutter
sound in setup menu.
• Continuous, Multi-shot 16 or BSS is
selected for the Continuous setting in
shooting menu.
• d (Sports scene mode) or l (Museum
scene mode) is selected.
• Blink proof is set to On for smart portrait
mode.
• D mode is selected.
• The speaker is being blocked. Do not cover it.

124

• Off is selected for AF assist in the setup
menu.
• AF-assist illuminator turns off automatically in
some scene modes.

123

Lens is dirty. Clean lens.

135

Colors are unnatural.

White balance does not match light source.

96

Randomly spaced bright pixels
(“noise”) appear in image.

Shutter speed too slow or ISO sensitivity is high
as the subject is dark. Noise can be reduced by:
• Using flash.
• Specifying a lower ISO sensitivity setting.
• Using a scene mode which has noise
reduction ability.

Pictures appear smeared.

47
75
98

98
35, 38
49
75
5, 22

34-39

Technical Notes

AF-assist illuminator
does not light.

34, 35

28
99
34-40

145

Troubleshooting
Problem

Technical Notes

146

Cause/Solution
Flash is off.
Flash window is blocked.
Subject is beyond flash range.
Adjust exposure compensation.
Raise the ISO sensitivity.
Subject is backlit. Select o (Backlight scene
mode) or use fill flash.

A

Pictures are too dark
(underexposed).

•
•
•
•
•
•

Pictures are too bright
(overexposed).

Adjust exposure compensation.

Unexpected results when flash
set to V (auto with red-eye
reduction).

28, 35
If taking pictures with V (auto with red-eye
reduction) or fill flash with slow sync and redeye reduction when scene mode is set to Night
portrait, In-Camera Red-Eye Fix may be applied
to areas not affected by red-eye. Select any flash
mode other than V (auto with red-eye
reduction) and select any shooting mode or
scene mode other than Night portrait, then try
shooting again.

Skin softening results are not as • Skin softening may not produce the desired
expected.
results depending on shooting conditions.
• For pictures with four or more faces, try using
Skin softening in the playback menu.
Saving images takes time.

It may take more time to save images in the
following situations.
• When the noise reduction function is in
operation.
• When flash is set to V (auto with red-eye
reduction).
• When using skin softening while shooting.

28
22
28
32
99
28, 39
32

49
72

34
29
34, 35,
48

Troubleshooting

Playback
Problem

A

Cause/Solution

File cannot be played back.

File or folder was overwritten or renamed by
computer or other make of camera.

–

Cannot zoom in on picture.

Playback zoom cannot be used with movies,
small pictures, or pictures that have been
cropped to a size of 320 × 240 or smaller.

–

Cannot record or play back
voice memos.

• Voice memos cannot be appended to movies. 78
• Voice memos cannot be attached to images 67
taken with other cameras. Voice memos that
are attached to the image using other
cameras cannot be played back on this
camera.

Cannot use quick retouch,
D-Lighting, crop, skin
softening, or small picture
options.

• These options cannot be used with movies.
• These options cannot be used with pictures
taken when 16:9 is applied in the Image
mode setting.
• Select pictures that support quick retouch,
D-Lighting, crop, skin softening, or small
picture.
• Camera is unable to edit pictures taken with
other cameras.
• Other cameras may be unable to play back
pictures recorded with this camera.

78
94

Pictures not displayed on
television.

• Choose correct Video mode.
• Memory card contains no pictures. Replace
the memory card. Remove the memory card
to play back pictures from the internal
memory.

126
18

Control settings for favorites
folder restore to default
settings, or pictures added to
favorites are not displayed
during favorite pictures
playback.

Data in the memory card may not be played
back correctly if overwritten on a computer.

–

68
68
Technical Notes

68

147

Troubleshooting
Problem
The recorded pictures are not
displayed in auto sort mode.

Technical Notes

148

A

Cause/Solution
• The picture you want to display is sorted in a
folder other than that you are browsing.
• Pictures recorded by another camera, and
pictures copied using Copy on another
camera cannot be displayed in the auto sort
mode.
• Pictures in the internal memory or memory
card may not be played back correctly if
overwritten on a computer.
• Up to 999 pictures and movie files can be
added to each folder. If the desired folder
already contains 999 pictures, new pictures or
movies cannot be added.

56

Nikon Transfer does not start
when camera is connected.

•
•
•
•
•

Camera is off.
Battery is exhausted.
USB cable is not correctly connected.
Camera is not recognized by the computer.
Computer is not set to start Nikon Transfer
automatically.
For more information on Nikon Transfer, refer
to help information contained in Nikon
Transfer.
• Check the compatible operating systems.

20
20
81
–
83

Pictures to be printed are not
displayed.

• Memory card contains no pictures. Replace
memory card.
• Remove memory card to print pictures from
internal memory.

18

Cannot select paper size with
camera.

Paper size cannot be selected from the camera if 86, 87
the printer does not support the paper sizes
used by the camera, or the printer automatically
selects the paper size. Use the printer to select
paper size.

57

–
–

80

Specifications
Nikon COOLPIX S570 Digital Camera
Type

Compact digital camera

Effective pixels

12.0 million

Image sensor

1/2.3-in. CCD; approx. 12.39 million total pixels

Lens

5× optical zoom, NIKKOR lens

Focal length

5.0-25.0mm (equivalent with 35mm [135] format picture angle:
28-140mm)

f/-number

f/2.7-6.6

Construction

7 elements in 6 groups

Digital zoom

Up to 4× (equivalent with 35mm [135] format picture angle:
approx. 560mm)

Vibration reduction

Electronic VR

Autofocus (AF)

Contrast-detect AF

Focus range (from
lens)

• [W]: Approx. 45 cm (1 ft. 6 in.) to ∞, [T]: Approx. 70 cm (2 ft. 4
in.) to ∞
• Macro mode: Approx. 3 cm (1.2 in.) to ∞ (when the zoom is
zoomed out)

Focus-area selection

Auto (9-area automatic selection), center, manual with
99 focus areas, face priority

Monitor

2.7-in., approx. 230k-dot, TFT LCD and 5-level brightness
adjustment
Approx. 97% horizontal and 97% vertical

Frame coverage
(playback mode)

Approx. 100% horizontal and 100% vertical

Storage
Media

• Internal memory (approx. 47 MB)
• SD (Secure Digital) memory cards

File system

DCF, Exif 2.2, and DPOF compliant

File formats

Still pictures: JPEG
Movies: AVI (Motion-JPEG compliant)
Sound files: WAV

Image size (pixels)

•
•
•
•
•
•
•

ISO sensitivity (Standard
output sensitivity)

ISO 80, 100, 200, 400, 800, 1600, 3200, Auto (auto gain from ISO
80 to 1600), Fixed range auto (ISO 80 to 400, 80 to 800)

Technical Notes

Frame coverage
(shooting mode)

4,000 × 3,000 High (4000P)/Normal (4000)
3,264 × 2,448 Normal (3264)
2,592 × 1,944 Normal (2592)
2,048 × 1,536 Normal (2048)
1,024 × 768 PC screen (1024)
640 × 480 TV screen (640)
3,968 × 2,232 16:9 (3968)

149

Specifications
Exposure
Metering

256-segment matrix, center-weighted (digital zoom less than
2×), spot (digital zoom 2× or more)

Exposure control

Programmed auto exposure with motion detection and
exposure compensation (–2.0 to +2.0 EV in steps of 1/3 EV)

Range
(ISO 100)

[W]: –1.1 to +15.7 EV
[T]: 1.5 to 18.3 EV

Shutter
Speed

Mechanical and charge-coupled electronic shutter
1/1500-1 s (when ISO sensitivity is set to Auto or locked)

4 s (when scene mode is set to Fireworks show)
Aperture
Range
Self-timer

Electronically-controlled ND filter (-2 AV) selection
2 steps (f/2.7 and f/5.4 [W])
Can be selected from 10 and 2 second duration

Built-in flash
Range (approx.)
(ISO sensitivity: Auto)

[W]: 0.5 to 5.5 m (1 ft. 8 in. to 18 ft.)
[T]: 0.5 to 2.2 m (1 ft. 8 in. to 7 ft. 3 in.)

Flash control

TTL auto flash with monitor preflashes

Interface

Hi-Speed USB

Data Transfer Protocol MTP, PTP
Technical Notes

Video output

Can be selected from NTSC and PAL

I/O terminal

Audio/video output; digital I/O (USB)

Supported languages

Arabic, Chinese (Simplified and Traditional), Czech, Danish,
Dutch, English, Finnish, French, Greek, German, Hungarian,
Indonesian, Italian, Japanese, Korean, Polish, Portuguese,
Norwegian, Russian, Spanish, Swedish, Thai, Turkish

Power sources
Battery life*

One Rechargeable Li-ion Battery EN-EL10 (supplied)
AC Adapter EH-62D (available separately)
Approx. 220 shots (EN-EL10)

Dimensions
(W × H × D)

Approx. 92 × 56.5 × 21.5 mm (3.6 × 2.2 × 0.8 in.) (excluding
projections)

Weight

Approx. 120 g (4.2 oz.) (without battery and SD memory card)

Operating environment

150

Temperature

0 to 40 °C (32 to 104 °F)

Humidity

Less than 85% (no condensation)

Specifications

• Unless otherwise stated, all figures are for a camera with a fully-charged
Rechargeable Li-ion Battery EN-EL10 operated at an ambient temperature of
25 °C (77 °F).
* Based on Camera and Imaging Products Association (CIPA) standards for measuring the life
of camera batteries. Measured at 23 °C (73 °F); zoom adjusted with each shot, flash fired
with every other shot, image mode set to I Normal (4000). Battery life may vary
depending on shooting interval and length of time menus and images are displayed.

Rechargeable Li-ion Battery EN-EL10
Type

Rechargeable lithium-ion battery

Rated capacity

DC 3.7 V, 740 mAh

Operating temperature

0 to 40 °C (32 to 104 °F)

Dimensions
(W × H × D)

Approx. 31.5 × 39.5 × 6 mm (1.2 × 1.6 × 0.2 in.) (excluding
projections)

Weight

Approx. 15 g (0.5 oz) (excluding battery case)

Battery Charger MH-63
AC 100-240 V, 50/60 Hz, 0.07-0.045 A

Rated capacity

7-10.8 VA

Rated output

DC 4.2 V, 0.55 A

Battery

Rechargeable Li-ion Battery EN-EL10

Charging time

Approx. 100 minutes when battery is fully discharged

Operating temperature

0 to 40 °C (32 to 104 °F)

Dimensions
(W × H × D)

Approx. 54 × 20 × 85 mm (2.1 × 0.8 × 3.3 in.) (excluding power
cable)

Length of power cable

Approx. 1.8 m (6 ft.)

Weight

Approx. 55 g (1.9 oz) (excluding power cable)

B

Technical Notes

Rated input

Specifications

Nikon will not be held liable for any errors this manual may contain. The appearance of this product
and its specifications are subject to change without notice.

151

Specifications

Supported Standards
• DCF: Design Rule for Camera File System is a standard widely used in the digital
camera industry to ensure compatibility among different makes of camera.
• DPOF: Digital Print Order Format is an industry-wide standard that allows
pictures to be printed from print orders stored on the memory card.
• Exif version 2.2: This camera supports Exif (Exchangeable Image File Format
for Digital Still Cameras) version 2.2, a standard that allows information stored
with photographs to be used for optimal color reproduction when images are
output from Exif-compliant printers.
• PictBridge: A standard developed cooperatively by the digital camera and
printer industries, allowing photographs to be output directly to a printer
without connecting the camera to a computer.

Technical Notes

152

Index
Symbols

A
AC adapter 131
AF area 24
AF area mode 101
AF assist 123
Audio-in/Video-in jack 79
Auto flash 28
Auto focus 31
Auto mode 20
Auto off 124
Auto sort menu 58
Auto sort mode 56
Autofocus 77

Autofocus mode 77
AV cable 79

B
Back light o 39
Battery 12, 14, 117
Battery chamber 5
Battery charger 12, 131
Battery latch 5
Battery level 20
Battery-chamber/memory card slot cover
5, 14, 18
Beach/snow g 36
Best Shot Selector 98
Black-and-white 100
Brightness 119
BSS 98
Built-in flash 4, 28
Built-in microphone 4, 66
Button sound 124

C
Cable connector 4, 79, 80, 84
Calendar display 51
Close-up k 38
Cloudy 96
Color options 100
Compression ratio 94
Computer 80, 80–83
copying pictures to 80–83
Continuous 98
Copy n 39
Copying pictures 110
Crop 74
Cyanotype 100

Technical Notes

R 46
A (shooting mode) button 5, 8
g (Tele) 4, 23
f (Wide) 4, 23
k Apply selection button 5, 9
A Auto mode 20
F Auto sort mode 56
l Delete button 5, 26, 27, 67, 78
o Exposure compensation 32
h Favorite pictures mode 59
m Flash mode 28
j Help 4, 11
C List by date mode 53
p Macro mode 31
d Menu button 5
D Movie mode 75
c Playback mode 5, 8, 26
i Playback zoom 4, 52
C Scene mode 33
n Self timer 30
z Setup menu 112
F Smart portrait mode 47
h Thumbnail playback 4, 50
.AVI 132
.JPG 132
.WAV 132

D
Date 16, 116
Date imprint 120
Daylight 96
Delete 109
Digital zoom 23, 123
Direct print 84

153

Index

Technical Notes

D-Lighting 71
DPOF print 89
DSCN 132
Dusk/dawn i 37

Image size 94
Incandescent 96
Internal memory 18
ISO sensitivity 99

E

L

Electronic VR (movies) 77
Electronic VR (still pictures) 121
EN-EL10 12, 14
Exposure compensation 32
Extension 132
Eyelet for camera strap 4

Landscape c 34
Language 126
Lens 4, 149
Li-ion rechargeable battery 12, 14
List by date menu 55
List by date mode 53

F

M

Face priority 101
Favorite pictures menu 64
Favorite pictures mode 63
File names 132
Fill flash 28
Fireworks show m 39
Firmware version 130
Fixed range auto 99
Flash 28, 29
Flash lamp 5, 29
Flash off 28
Fluorescent 96
Focus 24, 77, 101
Focus lock 102
Folder name 132
Food u 43
Format 19, 125
Format memory card 19, 125
Formatting internal memory 125
FSCN 132
Full-time AF 77

Macro mode 31
Memory capacity 20
Memory card 18, 131
Memory card slot 5, 18
Menus 114
Monitor 5, 6, 135
Monitor settings 119
Motion detection 122
Movie menu 76
Movie mode 75
Movie options
TV movie 76
Movie playback 78
Movie settings 76
Multi selector 5, 9
Multi-shot 16 98
Museum l 38

H

154

N
Night landscape j 37
Night portrait e 35
Nikon Transfer 80, 81
Number of exposures remaining 20, 95

Halfway 11
Help 11

O

I

P

Identifier 132
Image mode 21, 33, 94, 95
Image review 119

Panorama assist p 40, 45
Paper size 86, 87
Party/indoor f 36

Optional accessories 131

Index
Photo info 119
PictBridge 84
Pin cover 5
Playback 26, 27, 50, 52
Playback menu 106
Playback-mode selection menu 8
Portrait b 34
Power 16, 20
Power switch 4, 20
Power-on lamp 4, 20
Preset manual 97
Print 86, 87, 90
Print set 90, 92
Print Set (Date) 91
Printer 84
Protect 109

R

S
Scene auto selector x 34, 41
Scene mode 33, 34
Self-timer 30
Self-timer lamp 4, 30
Sepia 100
Setup menu 112
Shooting 20, 22, 24
Shooting menu 93
Shooting-mode selection menu 8
Shutter sound 124
Shutter-release button 4, 24
Single 98
Single AF 77
Skin softening 48, 72
Slide show 108

T
Thumbnail playback 50
Time zone 116, 118
Tripod 5
TV 79
TV movie 76

U
USB cable 80, 81, 85

V
Video mode 79, 126
ViewNX 80, 82
Vivid color 100
Voice memo 66
Volume 78

Technical Notes

Rechargeable battery 131
Rechargeable Li-ion battery 12, 14
Recording movies 75
Red-eye reduction 28, 29
Reset all 128
Rotate image 110
RSCN 132

Slow sync 28
Small picture 73
Smart portrait menu 48
Smart portrait mode 47
Smile timer 49
Software Suite 80
Sound settings 124
Speaker 5
Sports d 35
SSCN 132
Standard color 100
Strap 11
Sunset h 36

W
Welcome screen 115
White balance 96

Z
Zoom control 4, 78

155

156

157

158

DIGITAL CAMERA

User’s Manual
No reproduction in any form of this manual, in whole or in part
(except for brief quotation in critical articles or reviews), may be
made without written authorization from NIKON CORPORATION.

6MM72611-01

En

Printed in Europe
CT9H01(11)

En



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Extract
Page Mode                       : UseOutlines
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Creator Tool                    : FrameMaker 7.2
Modify Date                     : 2009:09:28 15:06:53-04:00
Create Date                     : 2009:07:16 10:20:24Z
Metadata Date                   : 2009:09:28 15:06:53-04:00
Format                          : application/pdf
Title                           : 
Creator                         : Nikon Corporation
Document ID                     : uuid:7ad5faf6-78e4-46bb-aeb3-b6d84f18ceca
Instance ID                     : uuid:ff0b37b1-e13b-4914-9c07-a9b34caf97d6
Page Count                      : 172
Page Layout                     : SinglePage
Author                          : Nikon Corporation
EXIF Metadata provided by EXIF.tools

Navigation menu