Nine Eagles Electronic Technology TOY2012 Radio control flight system User Manual
Shanghai Nine Eagles Electronic Technology Co., Ltd. Radio control flight system
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1738626 |
| Application ID | qizBX30fgMiRdMlJ0CDFkg== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 76.99kB (962432 bits) |
| Date Submitted | 2012-07-07 00:00:00 |
| Date Available | 2012-07-07 00:00:00 |
| Creation Date | 2012-06-13 16:34:36 |
| Producing Software | Adobe Acrobat Pro 9.3.0 |
| Document Lastmod | 2012-06-20 18:35:15 |
| Document Title | User Manual |
| Document Creator | Adobe Acrobat Pro 9.3.0 |
NE RIC 797B Instruction Manual SPI TF 1' RE I 7973120322 SPITFIREIINSTHU DIIII'IAIIUIII. Please keep the package and manual as reference for the future. Contents Product Introduction Warning and FCC Information Specification Product List \Amcawm Transmitter Control Identification 9 Instruction for assembling the airplane 10 Preparation before fly 11 Assembly of base 12 Water injection into base 12 The connection between the aeroplane and the rotary base 13 Fly status 13 Game for air fight 14 The operation procedure for the fly 15 Testing before fly 16 Flying field 17 Fly practice a 1 4;. 9‘42; .L ,5 us. .9——b __ \fi,” 1 i: , © Product introduction This product breaks the operational mode of original wire ,owned a variety of patents.especially for the beginnerth is allowed for you to operate its indoor flight.in garage or small spacethe range of rudders of RIC make it availablity of aerobatic flightit make available to operate the plane with hands,add electronic R/C,it will make you to enjoy the pleasure of flying. It makes possible for multiuser to play together with internal ribbon. Eusure that yours and other people's hands,and faces are kept away from the ratatirig parts Warning and FCC lnlormatlon I Waring Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's aut ority to operate the eqUIpmen . NOTE: This e ui ment has been tested and found to comply with the limits for a Class B igital device. pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation, This e uipment generates, uses and can radiate radio frequency energy and. i not installed and used in accordance with the instructions. may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: D Reorient or relocate the receiving antenna. El Increase the separation between the equipment and receiver. El Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. [I Consult the dealer or an experienced radio/TV technician for help This device complies with Part 15 of the FCC Rules. Operation is subject to the followin two conditions: 51; t is device may not cause harmful interference. and 2 this device must accept any interference received. including interference that may cause undesired operation. —9— SP1 FIRElli. I Instructions for Disposal of WEEE by User in the European Union This product must not be disposed ol with other wastelnsteadit is the user‘s responstbility to dispose at their waste equipment by handing lt over to a disignated collections point tor the recycling ol waste electrical and electronic equipmenl.The separate collection and recycling ol your waste equipment at the time at disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment For more inlormation about where you can drop on your waste equipment tor recyclingplease contact your local city otlice.your household waste disposal servrce or where you purchased the product. I LiPo Battery Safety Guidelines Lithium Polymer batteries are significantly more volatile than alkaline or NlCdfitiMH batteries used in RIC applications All manulacturer's Instructions and warnings must be lollowed closely Mishanding ol LiPo batteries can result in lire.Always tollow the manulacturer's instructions when disposing ol Lithium Polymer batteries it you are unsure at how to charge the battery included wrlh this productplease seek the advrce at your local hobby shop. I SPECIFIC SAFETY GUIDELINES t.Store in a tire prool container and charge on an open lire prool surlace. 2. Charge in a protected area devmd ut combustibles, Never leave the charging Process unanend 3 In the event at damage carelully remove the battery to a sale place to observe lor At least hall an hourDamaged batteries are likely to explode.Never attempt to Charge a damaged battery. no matter how slight the damage Dispose ol damaged Batteries as the instructions below, 4.Never use Chargers designed lor N|7CD batteriesll the batteries. It the batteries show any Sill” Oi swelling Remove them to a sale place outside as they could erupt into llames, SMOST IMPORTANT-Never plug in a battery and leave to charge overnight Serious tires have resulted lrom this practice 6 Do not attempt to make your own battery packs lroi'n indivrdual cells. I It the battery pack involved in a crash or is otherwise damaged 1. Remove the pack for damage to the wtring or connections 2.lnspect the pack for damage to the wiring or connections 3.“ necessary. disassemble the pack and dispose 0t any damaged cells —6— SPITPIRE | iii» TRC Specification Model No.:NE RIC 797B Wing span:360mm Overall Lengthz330mm Flying weight:359 Power System: (2) 8 Hollow cup motor Battery:3.7V 150mAh Li-Po Product List Description SPITFIRE Transmitter Win Li-Po Battery Propeller Aluminium ring 4" Rotary Thread 6“ Rotary Thread 9" Rotary Thread 1 Red Ribbon Blue Ribbon Paster 1 SP] FIREHNS. ill)” I‘ This product is not a toy.you must operate them safely.chl|dren below 8 year- old are not suitable to operate. If you are not a player with broad experiencesso we suggest you should learn how to operate under the assistance of remote pilot with broad experiencespur manufacturing factory and distributors are not responsible for any application conditions. Adjusting and flying must be strictly operated according to the manual.make sure the hands,faces and bodies are far away from the rotary components. Make sure the flying is within indoor or subtle breeze condition.the rotary components are prohibited to approach other persons and far away from other objects. Please make sure to cut off the connection to the power while stop fly.,then turn off switch of the transmitter The airplane is equipment with Li-Po battery packs,strictly comply with the operating instructionsor it may cause accidentsuch as burningexplosionetc. The Self charging system equipped with the device is used to charge the system, or the special charger of the productand power adapter equipped is used. Take the charger and power adapter out of the power socket Long time electrification is prohibited without supervision to avoid accident. Using or laying lithium battery directly in the sunlight or near to fire is prohibited. Make sure the battery is placed under dry circumstance. Storage or transport with metal components is prohibited. Disassembly of battery is prohibited. Contact the charger and power adapter with moist hands is prohibited. When you fly the airplane,keep distance from other electrical equipment, magnetic objectswireless devices.etc.to avoid interference and accidents. It lacks power when the RIC give off the sound of beep.please stop flying,and change the battery of the R/C. 1.Non-rechargeable batteries are not to be recharged; 2.Rechargeable batteries are only to be charged under adult supervision; 3.Rechargeable batteries are to be removed from the toy before being charged: 4.Diflerent types of batteries or new and used batteries are not to be mixed; 5.Bal‘teries are to be inserted with the correct polarity; 6.Exhausted batteries are to be removed from the toy; 7.The supply terminals are not to be short—circuited. —9_ SPITFIREHRS Transmitter Control Identification throttle trim Elevator trim throttle stick rudder/elevator stick code binding button gagmry/aduanced power indicating light charging indicating light big and small servo indicating light (white light indicating big servo/light off indicating small servo) —o— SPITFIRE l lilSi'r I Preliminary,High-Level Mode Switching Of RIC To meet players' requirement of different level.preliminary and high—level controlled mode is equipped with the RIC of the product. 1.Turn on the R/C,check the controlled mode is high-level or preliminary,the mode is high-level if the light is on.or preliminary. HM white lightoll amen-m- high-Ievel mode preliminary mode 2.Mode switch is changed by means of vertically pushing the preliminary,high- level buttons. Thereforehigh-Ievel mode is suitable for players with experiencewe suggest you choose the preliminary mode to fly for beginners. I Battery Charging 1.make sure there is a battery in RIC and adequacy of power. 2.take the charging cover out behind the RIC. 3.Take convex rib ol the plastic part of Li- PO battery to suit the charging groove of R/C,put the battery into the charging groove.at this time,charging indicator located at the back cover of RIC is on. 4.The indicator light crush out when charging is finished. SPITFIREl Instruction for assembling the airplane 1.|nsta|lation oftha landingskids. I The Installation And Disassembly Of Aeroplane's Wing tTake out the aeroplane winginsert the front part of aeroplane wing into inner of airframe. 2.Fasten the retaining key behind the aeroplane wing tightlyJet the bayonet loose. push upward to let it in,then fix it amordingiy. ‘ ‘ 3.Hand the retaining key of the tailing edge tightly when you dismount itthen pull it outwardat the same time,pul| the aeroplane wing towards the opposited direction by the other hand Noticesadult supervision is followed when dismounting aeroplane is needed‘it can avoid damaging the aeroplane under ina- ppropriate physical strength, Preparatlon before fly 1tBefore connecting battery power, please confirm the transmitter is already open and the throttle rocker is at the initial position. 2.Check ifall rudder and elevator are in neutral position or not. If not. please use tools (through long nose pliers) to adjust the u-shaped ring of push»pull wire. to change the length of the wire so that all rudder and elevator are in neutral position 3.The series ofairptanes are very sensitive to the rudderfunction‘ Besides the advanced mode and primary mode of the transmitter.the players also can increase ordecrease the swing through moving the slot outside or inside according to your personal hobby. highsensmve mediumselhifive Weensitive ltielmestsensitive SPITFIREl . » H Make sure all trim buttons are in the middle position. and the throttle stick is at its lowest position before lly. Make sure airplane is in a horizontal path against wind before casting Assembly of base 1.Take the base,aluminum polel,aluminum pole2 out of packing. 2tKeep the screw end of the aluminum polel downward, screw the end into base,and fasten them tightly by means of the nut of the base. 3.Take out the aluminum ring,insert it into fl aluminum pole2 aluminum ring aluminum pole. 4.Take out the aluminum ring 2,keep the screw end of it downward,then insert this end into the inner nut of the aluminum pole1 tightly. aluminum polel base Aflentioniassembly under the adult supervision. —0— Water injection into base 1.take out the plug,inject water into the base to increase the weight,avoiding the pole fall down. 2.injection water is about 34Kg if need. 3tdrop the water out of the base when the fly is finished. The connectlon between the aeroplane and the rotary base 1.take the connecting wiring output the end(1) into the groove of the rotary ring. ‘ 2.insert the opposite end of the connecting wiring into the drag groove located in the wingtip,then enboled to the holddown groovethen ok, SPITFIREi x . I Fly status I Fly Forward CCW I Fly Backward CW Game for air fight Ht 2 person play the aeroplanes with the same configurationinsen the rotary ring of one of the 2 aeroplanes into the aluminum pole,the connected to the aeroplane. 2.Make sure the draught lines are the same lengthso they fly in a same circle. 3.Take the ribbons out.pasted them to the vertical fins of the aeroplanes by means of double faced adhesive tape or other adhesive tape,the corrosive materials are not allowedsuch as CA tapeaoid damaging the aeroplanes. 4.The air fight is designed to cut the ribbon of the other person by means of the ruddie of himseitit not only increases the operational skills.but also the flight l k V N w SPITFIRE‘ The operation procedure for the fly 1.Take the cover of the RIC battery off. 2.Put the 4 AA battery. 3.Turn on the power,check the LED display it there is a data on it 4.Take the convex rib of the plastic part of Li-PO battery to suit the 2 grooves of battery jar,put the end with mark of the Li-PO battery is opposite to the flat of gear,then put the battery into the battery jar. I Start Aeroplane Up 1.Plug in the Li-PO 2,Switch on the RIC Wrong Operation The Correct Operafion SPITFIREl I Switch Off The Aeroplane 1.Switch Off The RIC 2.Pu|| Off Li-PO Wrong Operation <— 1.Pul| Off Li-PO 2.Switch Off The RIC Th9 Correot Operation Testing before fly I Throttle trimming Ifthe propeller runs when no throttle stick input is given, or it doesn‘t run when the throttle stick input is given. an adjustment for the throttle trim system is required, Push the propeller throttle stick downwards until the propeller stops when the propeller runs without throttle stick input. I Elevator trimming When the airplane tilts upwards and downwards during fly, an adjustment of rudder is required. It the airplane tilts downwards, push the trim button downwards unlil Itdoesn'ttilt. lithe airplane tilts upwards. push the trim button upwards until it doesn‘t tilt. Flying field The flying field selected must be suitable for flying. No obstacles are allowed when flying the plane in the room. The plane must be flown in open area, Please keep the airplane away from trees. electrical cables and other obstacles. Flying over the people is prohibited. Fly practice Turn on the transmitter in accordance WIth the manua|.Turn on the power of the airplane Afterthe airplane is adjusted. check the servo before fly. 1. Check the wind direction before fly. The airplane is supposed to take offer land towards the wind. 2. Push the throttle stick and throw the airplane horizontally. 3. Adjust the throttle and direction stick to fly the airplanestably.The beginner is not supposed to fly the airplane either too high or too farlf the airplane doesn'tfly stably.an adjustment for the airplane is required before flying it 4. The beginner shall use the controllers gently. Suddenly flying the airplane up or down is not allowed. 5. The airplane shall be placed on the flat ground and in the proper direction before taking oftfrom ground. Accelerate the airplane in a straight line by increasing the throttle stick input. 6. In orderto learn lhellying skill better, it is suggested that the beginner shall usethe small rudder to manipulate the airplane. The players can turn to big rudder when they become more skilled after enough training. 5P1 TFI RE Geemac Sales & Marketing Ltd 20 Queensbridge Bedford Road Northampton NN4 73F ENGLAND Tel No: +44(0)1604 401119 E-mail: gerald@geemac.biz
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No Create Date : 2012:06:13 16:34:36+08:00 Creator : Adobe Acrobat Pro 9.3.0 Modify Date : 2012:06:20 18:35:15+08:00 Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Metadata Date : 2012:06:20 18:35:15+08:00 Creator Tool : Adobe Acrobat Pro 9.3.0 Format : application/pdf Document ID : uuid:63df6b09-3e9e-42f4-97c0-0c49a71bbfea Instance ID : uuid:aed40c2f-6e52-463e-b340-b712430a499c Producer : Adobe Acrobat Pro 9.3.0 Page Count : 18EXIF Metadata provided by EXIF.tools