Ninebot NBPLUS Remote Controller User Manual Smart UM 2017 06 15

Ninebot (Changzhou) Tech Co., Ltd. Remote Controller Smart UM 2017 06 15

User Manual

www.segway.com
The manufacturer reserves the right to make changes to the Segway Smart, release firmware updates, and update this manual at
any time. Visit www.segway.com to download the latest user materials. You must install the Ninebot by Segway App to follow the
New Rider Tutorial, activate your Segway Smart, and obtain the latest updates and safety instructions.
V1.0
USER MANUAL
Go to www.segway.com to watch the safety video.
Rendez-vous sur www.segway.com pour télécharger le manuel d’utilisation.
Vaya a www.segway.com para descargar el manual del usuario.
Visite www.segway.com para baixar o manual do usuário.
01
Thanks for choosing Segway SmartContents
Let’s begin. Thanks for choosing the Segway Smart (hereinafter referred to as Smart). Your Smart is both
a powerful electric balancing vehicle and also a personal recreation equipment.
Enjoy the many features of your Smart, powered by our innovative RF locating technology and the remote
controller. Smart is easy and safe to control. Have fun with it!
You can also buy a gimbal camera to equip your Smart for stunning photos and videos.
Enjoy your ride!
4. Assembling Your Segway Smart
1. Riding Safety
5. First Ride
3. Diagram
6. Charging
2. Packing List
02
04
05
07
07
09
12. Specifications
7. Using the Storage Compartment
14. Trademark and Legal Statement
13. Certifications
9. Warning
11. Maintenance
8. Learning to Ride
10. Modes
15. Contact
09
10
12
15
16
18
17
20
21
Appendix 1: Instruction of Xiaomi Platform Camera (to be purchased separately) 22
Appendix 2: Use Scenes of Segway Smart + Platform Camera 23
Front Back
Always step on/o from the back of the Smart. Otherwise you risk falls and/or collisions
because the steering direction is reversed.
02 03
1 Riding Safety
1. The Smart is a recreational product, which is dierent from motor vehicles driven on the road. Before mastering riding
skills, you need to practice. Neither Ninebot Inc. nor Segway Inc. is responsible for any injuries or damage caused by a
rider's inexperience or failure to follow the instructions in this document.
2. Please understand that you can reduce the risk by following all the instructions and warnings in this manual, but you
cannot eliminate all the risks. Remember that whenever you ride the Smart you risk injury or death from loss of control,
collisions, and falls. When entering into public spaces always comply with the local laws and regulations. As with other
vehicles, faster speeds require longer braking distance. Sudden braking on smooth surfaces could lead to wheel slip, loss
of balance, or falls. Be cautious and always keep a safe distance between you and other people or vehicles when riding.
Be alert and slow down when entering unfamiliar areas.
3. Respect pedestrians by always yielding the right of way. Pass on the left whenever possible. When approaching a
pedestrian from the front, stay to the right and slow down. Avoid startling pedestrians. When approaching from behind,
announce yourself and slow down to walking speed when passing.
4. In places without laws and regulations governing self-balancing electric vehicles, comply with the safety guidelines
outlined in this manual. Neither Ninebot Inc. nor Segway Inc. is responsible for any property damage, personal
injury/death, accidents, or legal disputes caused by violations of the safety instructions.
5. Do not allow anyone to ride the Smart on his/her own unless they have carefully read this manual,watched the safety
video, and followed the New Rider Tutorial on the Ninebot by Segway App. The safety of new riders is your responsibility.
Spot new riders until they are comfortable with the basic operation of the Smart. Make sure each new rider wears a
helmet and other protective gear.
6. Before each ride check for loose fasteners, damaged components, and low tire pressure. If the Smart makes abnormal
sounds or signals an alarm, immediately stop riding. Diagnose your Smart via the Ninebot by Segway App and call your
dealer/distributor for service.
7. Always wear a helmet when riding. Use an approved bicycle or skateboard helmet that fits properly with the chin strap in
place, and provides protection for the back of your head.
8. Do not attempt your first ride in any area where you might encounter children, pedestrians, pets,vehicles, bicycles, or
other obstacles and potential hazards.
9. Be alert! Scan both far ahead and in front of your Smart — your eyes are your best tool for safely avoiding obstacles and
low traction surfaces (including, but not limited to, wet ground, loose sand, loose gravel, and ice).
10. To reduce risk of injury, you must read and follow all “CAUTION” and “WARNING” notices in this document. Do not ride
at an unsafe speed. Under no circumstance should you ride on roads with motor vehicles. Always follow these safety
instructions:
A. The following people should not ride the Smart:
i. The manufacturer recommends riders be between the ages of 14-60 years old. Riders between 14-18 years old
should ride under adult supervision.
ii. Anyone under the influence of alcohol or drugs.
iii. Anyone who suers from disease that puts them at risk if they engage in strenuous physical activity.
iv. Anyone who has problems with balance or with motor skills that would interfere with their ability to maintain
balance.
v. Anyone whose height or weight is outside the stated limits (see Specifications).
B. Comply with local laws and regulations when riding this product. Do not ride where prohibited by local laws.
C. To ride safely, you must be able to clearly see what is in front of you and you must be clearly visible to others.
D. Do not ride in the snow, in the rain, or on roads which are wet, muddy, icy, or that are slippery for any reason. Do not
ride over obstacles (sand, loose gravel, or sticks). Doing so could result in a loss of balance or traction and could
cause a fall.
E. Do not accelerate or decelerate suddenly. Do not accelerate when the Smart tilts back or sounds an alarm. Do not
attempt to override the speed limiter.
11. Do not insert the power cord if the charge port is wet.
12. Use a surge protector when charging to help protect your Smart from damage due to power surges and voltage spikes.
Only use the Segway supplied charger. Do not use a charger from any other product.
13. Use only Ninebot by Segway approved parts and accessories. Do not modify your Smart. Modifications to your Smart
could interfere with the operation of the Smart, could result in serious injury and/or damage, and could void the
Limited Warranty.
14. Do not sit on the steering bar. Doing so could result in serious injury and/or damage to your Smart.
04 05
2 Packing List
Mainframe
Steering Bar
(RF Locating system integrated)
Valve Stem
Extension x 1
M5 Screws x2 Cap x1 Hex Wrench x1
Remote Controller x 1
User Materials
Accessories Box
Accessories in the Box
When unpacking your Smart, please verify that the above items are included in the package. If you are missing any
components, please contact your dealer/distributor or email technicalsupport@segway.com. After verifying that all
components are present and in good condition, you can assemble your new Smart.
Please retain the box and packaging materials in case you need to ship your Smart in the future.
Always power o your Smart and unplug the charge cable before assembling, mounting accessories, or cleaning.
3 Diagram
Dashboard
When the Ninebot by Segway App is connected to the Smart, this icon will glow steadily. When
Bluetooth is enabled but not connected to a smart phone, this icon will blink.
Bluetooth
Enable and adjust Speed Limit Mode via the Ninebot by Segway App. When the icon is illuminated, Speed
Limit Mode is on. This speed limit can be adjusted in the Ninebot by Segway App. As you approach the
speed limit, the Smart tilts back. When you reach the speed limit, the Smart beeps.
Speed Limit
Lock
Power Button Turn ON/OFF. The Smart will automatically power OFF when idle for 10 minutes, or when laid down
(horizontal) for over 30 seconds.
Power Level
Enable Lock Mode via the App. The Smart and app will vibrate and sound an alarm if anyone moves it.
The remote control will also alarm if it is powered on if and within range of 20 meters from the Smart.
Indicates the remaining battery life. Each block equates to around 20% power level. When the battery
is nearly empty this icon blinks and the Smart beeps, indicating that you need to charge your Smart.
Your Plus will gradually reduce the max speed limit when power level dropping down. When less than
10%, the speed will be limited to 6.2 mph (10 km/h). Use the Ninebot by Segway App to view the
remaining power and estimated remaining range.
Adapter x1Power Cord x 1
Mi Camera
Your personal
photographer!
Camera sold separately.
Camera Interface
Steering Bar
Storage Compartment
Handle and Knee Pads
Charge Port
Battery Cabinet
Valve Stem
Foot Mat
Wheel Light
Wheel
Fender
Power Button
Headlight
Lock
Bluetooth
Speed Limit
Power Level
USER MANUAL LIMITED WARRANTYQUICK START
Your Smart will gradually reduce the max speed limit when power level dropping down.
06 07
There are safety risks when learning to ride the Smart. You must read the Safety Instructions and follow
the New Rider Tutorial in the Ninebot by Segway App before your first ride.
For your safety, your Smart is not activated at this time and will beep occasionally after Power ON.
Until activated, the Smart maintains a very low riding speed and steering sensitivity, and should not be
ridden. Install the Ninebot by Segway App on your mobile device (with Bluetooth 4.0 or above), connect
to the Smart with Bluetooth, and follow the App instructions to activate your Smart and follow the training
procedures.
Scan to download the App (iOS 8.0 or above, Android™ 4.3 or above)
Remote Controller
When using the Remote Control, do not shield the antenna area; do not cover the antenna area with any part of your body.
Turn o the Remote Control and stow it in the storage compartment when not in use. Please note that the Remote Control
cannot control the movement of your Smart when in Riding Mode.
With Ninebot by Segway App, you can customize what this button does. By default
manufacturer setting, it is to enable/disable Lock Mode.
When a camera is detected, the short press is always taking photo. Press and hold for one
second is always to start recording video, and then short press to stop recording. The button
blinks blue while recording.
Camera
Following
Home
Power switch. Short press the home button to power on the Remote controller. Long press to
turn it o. The Remote controller will turn o when idle for two minute.
Home mode. Short Press the Home button tell your Smart to hold position.
Battery indicator: a. Under normal working condition, when blue LED turns normally on, it
indicates battery level above 20%; when red LED turns normally on, it indicates battery level
below or equal to 20%; when red LED flashes, it indicates battery level below or equal to 10%;
when battery level below or equal to 5%, it will automatically shut down. b. Under charging state,
The Home button LED lights on red with breathing rhythm, and blue for full charge.
1)
2)
3)
Move the joystick to turn on Remote Control Mode. Use the Ninebot by Segway App to adjust
the Maximum vehicle speed.
Joystick
1)
1)
2)
Short press to Enable/disable Follow Mode. Use the Ninebot by Segway APP to adjust the
following speed and distance (from vehicle to controller).
One second long press to control the pitch and yaw position of the attached gimbal camera.
1)
2)
4 Assembling Your Segway Smart
5 First Ride
Ensure the cables are firmly connected.
1. Slide the steering bar on to the mounting bracket. Route the cable through the hole.
2. Align the tab on one connector with the notch on the other. Connect the cables.
3. Install the fasteners. Tighten securely.
4. Power on the unit for self check to ensure the cables are connected properly. The Smart beeps if the
cable is not installed correctly. Press the cap onto the steering bar until it snaps in place.
Ninebot by Segway App
1 2 3 4
Antenna Area
Camera Mode
(Customizable)
Follow Mode
Joystick
Home
08 09
6 Charging
The storage compartment is water resistant but not waterproof, and it cannot prevent extensive rain or
water from entering.
Your Smart is fully charged when the LED on the charger changes from red (charging) to green (trickle
charge).
7 Using the Storage Compartment
Opening and Closing: to open, first press the button, then pull o the cover; to close, insert the bottom
of the cover first, then press closed until it clicks.
Using: stow the remote control or gimbal camera inside the storage compartment, as shown. Use the
retaining strap to hold the item securely.
1.
2.
3
12
Install App and register/login. Power ON the Smart. The Bluetooth icon
blinking indicates the Smart is waiting for a
connection.
Click “Search device” to connect to your
Smart. The Smart will beep when the
connection is successful. The Bluetooth icon
will stop blinking and remain illuminated.
When your Smart intermittently sounds an alarm, stop riding and check the App for details.
Do not connect the charger if the charge port or charge cable is wet.
Charge port Open the rubber cap
CHARGING
Insert the plug
into the socket
12
CameraRemote
10 11
8 Learning to Ride
Go to a large open area and ask a friend to assist
you on your first ride.
1Lightly place one foot on the foot mat,
while keeping your other foot on the
ground holding your weight. Do not
press the steering bar with your leg.
2
Stand with your weight evenly
distributed on both feet and
relax, looking straight ahead.
4
Gently lean your body forward and
backward to control your movement.
5To turn, gently lean left or right
against the steering bar.
6
3Slowly transfer your weight onto the
Smart. The unit will beep, indicating it
is now in Balance Mode. Slowly step
on with your other foot.
≥4
≥4m
WARNING
Always step on from the back of the Smart.
After activation, the App will lead you through the New
Rider Tutorial. Please follow the instructions in the App
and in this manual.
NOTE
You must first download the Ninebot by Segway App on
your mobile device. The App will lead you through the New
Rider Tutorial.
For your safety, the Smart will limit the max speed to
4.3 mph (7 km/h) until you complete the New Rider
Tutorial. For the first 0.6 miles (1 km) after completing the
New Rider Tutorial, the max speed will be limited to 6.2
mph (10 km/h), after which you can disable the speed
limiter via the App and reach a maximum speed of 10 mph
(16 km/h).
Wear an approved helmet and other
protective gear to minimize any
possible injury.
WARNING
Rider must weigh 55–220 lbs (25–100 kg)
and must be 4'3"–6'6" (130–200 cm) tall.
12 13
15°
9 Warning
Watch your head when
passing through doorways.
Avoid contacting
obstacles with the
tire/wheel.
When traversing small bumps or uneven terrain,
maintain a moderate speed 2-6 mph (3-10 km/h) and
keep your knees bent. Do not go too slow or too fast;
otherwise you may lose control and fall.
Avoid slopes steeper than 15°
or you may lose traction.
Do not ride through
puddles or other bodies of
water. Do not get wet.
You must read and understand the Warnings and Safe Riding
instructions in this manual before attempting to ride the Smart.
Do not ride on public
roads, motorways,
highways, or streets.
Do not accelerate when
the Smart tilts back or
sounds an alarm. Do not
attempt to override the
speed limiter.
Do not accelerate or
decelerate abruptly. Do not
lean more than 5° or
accelerate/decelerate faster
than 2.5 mph/s (4 km/h/s).
The Smart is for one rider
only. Do not ride double or
carry any passengers. Do
not carry a child. Do not
ride when pregnant.
Do not rock back and forth
or shift your weight
abruptly.
Do not ride over holes, curbs,
steps, or other obstacles.
0
14 15
Power Assist
Mode
Lifting
For your safety, motor power is cut o when the Smart is lifted o the ground in Balance Mode. When the Smart is put
back down it will begin balancing again. Do not lift the Smart by the fenders or mainframe; you risk pinching or injuring
your fingers/hands. Please lift via the steering bar as shown above.
10 Modes
When your Smart is powered on, but no rider is standing on it, it is in Power Assist Mode. Steer the Smart across smooth
surfaces using the steering bar. Do not guide it up stairs, across potholes, over large cracked/uneven surfaces, or over
other obstacles; guide your Smart around the obstacle or carry it over the obstacle as shown above.
Follow Mode Remote Control Mode
When you don’t want to ride, use Follow Mode to
bring your Smart with you. Press the Follow button
on the remote control to enable or disable Follow
Mode.
Warning (cont'd)
Do not ride on low traction
surfaces (including, but
not limited to, wet ground,
loose sand, loose gravel,
and ice).
Do not attempt stunts of
any kind. Always keep
both feet on the foot mats.
You must read and understand the Warnings and Safe Riding
instructions in this manual before attempting to ride the Smart.
Maintain contact with the
ground at all times. Do not
jump or attempt stunts.
You don’t need to bend down awkwardly to steer
your Smart around obstacles. Move the joystick on
the remote control to drive your Smart around.
16 17
Cleaning and Storing Your Smart
Use a soft, wet cloth to wipe the mainframe clean. Hard to remove dirt can be scrubbed with a toothbrush and toothpaste,
then cleaned with a soft, wet cloth. Scratches on plastic parts can be polished with extra fine grit abrasive paper.
NOTE
Do not wash your Smart with alcohol, gasoline, acetone, or other corrosive/volatile solvents. These substances may damage
the appearance and internal structure of your Smart. Do not wash your Smart with a power washer or high pressure hose.
WARNING
Make sure the Smart is powered OFF, the charging cable is unplugged, and the rubber cap on the charge port is tightly
sealed before cleaning; otherwise you may expose yourself to electric shock or damage the electronic components.
Store your Smart in a cool, dry place. Do not store it outdoors for extended periods of time. Exposure to sunlight and
temperature extremes (both hot and cold) will accelerate the aging process of the plastic components and may reduce
battery life.
Tire Pressure
Inflate tires to 35–50 psi. Inflate both tires equally.
Battery Pack Maintenance
Do not store or charge the battery at temperatures outside the stated limits (see Specifications). Do not discard or destroy
the battery. For more battery information, refer to the sticker on the battery itself, located on the bottom of the Smart. Refer
to your local laws and regulations regarding battery recycling and/or disposal.
A well maintained battery can perform well even after many miles of riding. Charge the battery after each ride and avoid
draining the battery completely. When used at room temperature (70°F [22°C]) the battery range and performance is at its
best; whereas using it at temperatures below 32°F (0°C) can decrease range and performance. Typically, at -4°F (-20°C)
range can be half that of the same battery at 70°F (22°C). Battery range will recover when temperature rises. More details
are available in the App.
NOTE
Typically, a fully charged battery should retain charge for 120-180 days in Standby Mode. A low-power battery should retain
charge for 30-60 days in Standby Mode. Remember to charge the battery after each use. Completely draining the battery
may cause permanent damage to the battery. Electronics inside the battery record the charge-discharge condition of the
battery; damage caused by over-discharge or under-discharge will not be covered by the Limited Warranty.
WARNING
Risk of fire. No user serviceable parts. Do not attempt to disassemble the battery.
WARNING
We strongly recommend against riding when the ambient temperature is below 23°F (-5°C) because low temperature will
limit the maximum power/torque. Doing so could cause personal injury or property damage due to slips or falls.
11 Maintenance 12 Specifications
16
[1] Typical Range: tested while riding under full power, 154 lbs (70 kg) load, 77°F (25°C), 9.3 mph (15 km/h) average speed on
pavement.
[2] Continuous Discharge Power: tested while under full power at 77°F (25°C). The value changes with temperature and remaining
battery capacity. For example, the continuous discharge power drops to ~80% of the maximum value at 10% remaining battery
capacity, and the continuous discharge power drops to ~70% of the maximum value at 32°F (0°C).
Item N4M350 Parameters
Dimensions Unit
35 lbs (16 kg)
22 miles (35 km)
15°
4’3”–6’6” (130–200 cm)
12.5 mph (20 km/h)
Package
Weight Payload
Net
Rider Recommended Age
Required Height
Machine
Parameters
Max. Speed
Typical Range 1
Max. Slope
Battery
Motors
22×11×24 in (570×280×620 mm)
55–220 lbs (25–100 kg)
14–60 years
23×16×13 in (585×445×333 mm)
Pavement, packed dirt, slopes < 15°, obstacles < 0.4 in (1 cm),
gaps < 1.2 in (3 cm)
Traversable Terrain
Operating Temperature
Storage Temperature
IP Rating
Nominal Voltage
Max. Charging Voltage
Charging Temperature
Nominal Capacity
Continuous Discharge Power 2
Battery Management System
Nominal Power
Max. Power
14–104°F (-10–40°C)
-4–122°F (-20–50°C)
IP54
32–104°F (0–40°C)
51 V
58.8 V
329 Wh
1530 W
Over-voltage, under-voltage, short circuit, and over-heating
protection. Auto-sleep and auto-wake.
800×2 W
400×2 W
18 19
Federal Communications Commission (FCC) Compliance Statement for USA
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
Industry Canada (IC) Compliance Statement for Canada
This device complies with Industry Canada license-exempt RSS standard (s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
CAN ICES-3 (B)/NMB-3(B)
Ninebot is not responsible for any changes or modifications not expressly approved by Ninebot. Such modifications could
void the user's authority to operate the equipment.
For model: N4M350
FCC ID: 2ALS8-NSMART
IC: 22636-NSMART
For model: N4MZ68
FCC ID: 2ALS8-NBPLUS
IC: 22636-NBPLUS
13 Certifications
32–104°F (0–40°C)
Charger
Model Number
Manufacturer
Supplier
Nominal Power
Input Voltage
Output Voltage
Output Current
Charging Temperature
Charge Time
Compliance
120 W
HT-A10-120W-58.8V
100 240 V AC @ 50 60 Hz
4 hours
CE,RoHS, REACH,UL,KC,FCC,IC,CCC
58.8 V
2 A
Chingmi(Beijing)Technology Co.,Ltd.
Chingmi(Beijing)Technology Co.,Ltd.
20 21
Ninebot and the shape icon are trademarks of Ninebot Inc.; Segway is the registered trademark of Segway Inc.; Ninebot by
Segway is a trademark of Segway Inc.; iPhone and iOS, that of Apple Inc.; Android, that of Google Inc. The respective
owners reserve the rights of their trademarks referred to in this manual.
Ninebot is the owner or licensee of various patents relating to Ninebot personal transportation robots, with other patents
pending. This manual is prepared by Ninebot who reserves all its copyrights. No institute or individual shall copy or
disseminate this manual in whole or in part, or make use of the aforesaid patents without the consent of Ninebot in writing.
The Smart is covered by U.S. and foreign patents. For patent information go to http://www.segway.com. Ninebot (Tianjin)
Technology Co. Ltd. manufactures and sells the Smart under a license from DEKA Products Limited Partnership.
We have attempted to include descriptions and instructions for all the functions of the Smart at the time of printing.
However, your Smart may dier slightly from the one shown in this document. Visit the Apple App Store (iOS) or the Google
Play Store (Android) to download and install the Ninebot by Segway App.
Please note that there are multiple Ninebot by Segway models with dierent functions, and some of the functions
mentioned herein may not be applicable to your unit. The manufacturer reserves the right to change the design and
functionality of the Smart product and documentation without prior notice.
All rights reserved. Copyright Segway 2017.
14 Trademark and Legal Statement
Contact us if you experience issues relating to riding, maintenance and safety, or errors/faults with your Smart.
Segway Inc.
14 Technology Drive, Bedford, NH 03110
Tel : 1-603-222-6000
Fax: 1-603-222-6001
Toll Free: 1-866-473-4929
E-mail Sales: customeroperation@segway.com
E-mail Service: technicalsupport@segway.com
Website: www.segway.com
Have your Segway Smart's serial number on hand when contacting Segway.
You can find your serial number at the top of the steering bar between the knee pads
or in the App under More Settings –> Basic Information.
15 Contact
22 23
Appendix 1: Instruction of Xiaomi Gimbal Camera (sold separately)
Gimbal Connection Button
Camera
Gimbal
Initial Angle Adjuster
Adapter
Together with the Xiaomi Camera, the Smart can take photos and videos. Use your Smart like a drone camera close
to ground.
In the default mode, the user can use the remote control to drive your Smart, take photo and recording. You can also
enable the camera to follow the remote control intelligently. You can also fix the camera to a specific direction while
you Smart is moving around.
More fun to be explored, go get your personal photographer!
Scan QR code to enter
purchase page or get
more information
Mount the camera on your Smart and adjust the inital angle.
Adapter
Gimbal
Camera
Take pictures and record video; Large angle of View images;
remote control; real-time preview and transmission with Ninebot
by Segway App; high quality video at 1920*1080/60fps;
Compatible to ???mini-SD card.
High accuracy three-axis stabilizer.
Appendix 2: Using Your Segway Smart + Camera
1. Remote control you Smart for real-time videos and photos, or let it work in the follow mode.
2. Path shooting: using the App’s advanced functions, the user can manually set a path, or record a path by riding the
Smart or using the remote control to drive the Smart. Then simply replay the path and record amazing video.
(TBD)

Navigation menu