Ninebot RUB033 Loomo User Manual

Ninebot (Changzhou) Tech Co., Ltd. Loomo 2ALS8 RUB033

a href="https://usermanual.wiki/Ninebot" itemprop="url"> Ninebot >

2ALS8-RUB033_User Manual

In the Box12543612Loomo: The Robot.3Extended air tap: For tire inflation.456USB 3.0 Type-C cable: (Compatible with USB 2.0).AC/DC adapter: International voltage. Cleaning cloth: For LCD screen.Extension bay converter: When attached, it provides direct access to USB 2.0 and 24V(1A limit) power supply.Hardware OverviewHardware SpecsDimensionsNet WeightBattery CapacitySpeed LimitHead Rotation RangeLCD ScreenOperating TemperaturePayloadDescriptionsHeight*Length*Width: 650x310x570mm~19 kg (~42 lbs)329 Wh8 km/h (4.3 mph) in robot mode, 18 km/h (11 mph) in SBV modeYaw ±150 degrees, pitch -90~180 degrees. Origin is upon transformation4.3 inch, 480x800 pixels0 ~ 35℃ (32 ~ 95℉)25 ~ 100 kg (55 ~ 220 lbs)Platform SpecsProcessorOperating SystemMemoryStorageUSB portsExtension BayDescriptionsIntel Atom Z8750, 4 cores 2.4GHz, x86-64Customized system based on Android 5.14 GB64 GBUSB 3.0 Type-CUSB 2.0 and 24V power supply (max. 1A)Sensor SpecsRealSense ZR300HD CameraMic ArrayUltrasonic SensorInfrared SensorsTouch SensorsWheel OdometryEncodersIMUDescriptionsReal-time 30Hz RGB-Depth image streaming (indoor & outdoor)1080p 30Hz streaming with 104 degrees FOV5 microphones enabling beamforming and voice localizationFrontal obstacle distance measurementGround cliff detectionThree touch sensors located at robot head left, right & backAbout 4 degrees precisionHall & magnetic encoders to measure each joint angleEnables camera stabilization & provides pose feedbackTouch to StopLeft TouchHD CameraIntel RealSensePower IndicatorCharger PortExtension BayBackFrontLCD ScreenUltrasonic SensorInfrared SensorsPower ButtonSpeakerTransform ButtonHandleUsage GuideProgramming (For developer)1. Programming is only applicable to the Robot mode. 2. Programming guide is on our developer website. Use your account to access: http://www.segwayrobotics.com/developer3. Register and participate discassions at forums.segwayrobotics.comRiding Instructions 1. Riding is only applicable in the SBV mode. DO NOT try to ride Loomo in its robot mode.2. Please step on with another individual’s assistance on an open area for your first ride. YOU NEED TO STEP ON FROM THE BACK.3. Step on to the foot mat with one foot standing firm, avoid touching the robot body with your shank or knees, which would accidently active steering.4. Slowly transfer your weight to your foot which is placed on the mat, and step up onto the other mat.5. Step on foot mat with both feet and relax, looking straight ahead, avoid severe wiggling.6. Step on to the foot mat with both feet and slowly lean your body forward or backward to control your movement. Robot ModeRobot Emergency StopTouch the back of the robot’s head back,the robot should immediately stop.Push & MoveTouch the top to push the robot in SBV mode, otherwise it will experience resistance.Carrying the RobotDO use the handle to lift the robot.SBV ModePower ButtonTransformation ButtonTire Air TapMic Array USB Type-CCHARGINGChargingLocate the charging port. Open the cap. Open the rubber cap. Insert the plug into the socket. 12312 43CHARGINGCHARGINGPress the power button to turn on the robot. It is in the Self-Balancing Vehicle (SBV) mode upon booting. Please read “Riding Instructions” before riding Loomo.If you want to use Loomo as a robot, press the transformation button at the top and Loomo will show its face. Press the button again when you want to switch Loomo back to the SBV mode.Loomo can be safely turned off in the SBV mode. Nothing will happen if you press the power button when Loomo is in the robot mode.Power on/off SBV Robot transformation1. 2. 3. LoomoTM
IC Radiation Exposure Statement for Canada This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent is otropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante. User manuals for transmitters equipped with detachable antennas shall also contain the following notice in a conspicuous location: This radio transmitter (identify the device by certification number, or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Le présent émetteur radio (identifier le dispositif par son numéro de certification ou son numéro de modèle s'il fait partie du matériel de catégorie I) a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal et l'impédance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste,ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur. IMPORTANT NOTE: Radiation Exposure Statement:
Download:
Mirror Download [FCC.gov]
Document ID3472329
Application IDLpEN4zXDY+wuic6LlsX+gQ==
Document Description2ALS8-RUB033_User Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeYes
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize116.92kB (1461514 bits)
Date Submitted2017-07-19 00:00:00
Date Available2017-07-20 00:00:00
Creation Date2017-05-19 18:51:29
Producing SoftwareAdobe PDF library 15.00
Document Lastmod2017-07-14 15:35:30
Document Title产品说明书更新版 0407
Document CreatorAdobe Illustrator CC 2017 (Macintosh)
FCC ID Filing: 2ALS8-RUB033

Navigation menu