Ningbo EverFlourish Smart Technology EF301TK Remote Control Transmitter User Manual 1

Everflourish Electrical Co., Ltd. Remote Control Transmitter 1

UserMan

 1 Instruction Manual for   Remote Control Receiver+ Remote Control Transmitter     Ref: 30UL/RF+EMW301TK           Function       1. The remote control socket (30UL/RF) turns on and off the connected lighting or appliance by a wireless transmitter (EMW301TK) using radio frequency up to 30 meters away.   2. It is ideal for controlling lighting for the purposes of home automation and energy saving.          30UL/RF                                          EMW301TK   Operation   1. Connect the remote control socket to the mains power supply.   2. Press the corresponding “ON”, “OFF” buttons on the transmitter to switch on and off the connected appliance by remote control.     3. The indicator on the receiver blink once for every reception of power on/off.
 2  Specifications   30UL/RF 1. Power Rating : 125V~, 50Hz, 1875W; 1250W(Tungsten)   2. Frequency:    433.92MHz     3. Distance:    30 meters       EMW301TK   1. Battery : CR2032 1×3VDC 2. Frequency : 433.92MHz   3. Distance : 30meters max.     4. Working temperature:-20 - 55°C             Manufacturer Logo:  Factory:Everflourish Electrical Co., Ltd. Address: Renjiu Village, Wuxiang Town, Yinzhou Ningbo 315111 P.R. China                                Caution: This device complies with Part 15 of the FCC Rules. Operation is subject   to the following two conditions: (1) this device may not cause harmful   interference, and (2) this device must accept any interference received,   including interference that may cause undesired operation.  Prudence: Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux   appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions   suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de   l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est   susceptible d'en compromettre le fonctionnement.     Changes or modifications not expressly approved by the party   responsible for compliance could void the user's authority to operate the   equipment.  This equipment has been tested and found to comply with the limits for   a Class B digital device, pursuant to part 15 of the FCC Rules. These   limits are designed to provide reasonable protection against harmful   interference in a residential installation. This equipment generates   uses and can radiate radio frequency energy and, if not installed and   used in accordance with the instructions, may cause harmful interference
 3 to radio communications. However, there is no guarantee that interference   will not occur in a particular installation. If this equipment does cause   harmful interference to radio or television reception, which can be   determined by turning the equipment off and on, the user is encouraged   to try to correct the interference by one or more of the following   measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that   to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.   Warning: Under Industry Canada regulations, this radio transmitter may only operate using an   antenna of a type and maximum (or lesser) gain approved for the transmitter by   Industry Canada. To reduce potential radio interference to other users, the antenna   type and its gain should be so chosen that the equivalent isotropically radiated power   (e.i.r.p.) is not more than that necessary for successful communication.   Avertissement : Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé   pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de   brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type   d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente   (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication   satisfaisante

Navigation menu