Ningbo Yaling Electrical Appliance YLT-10A Remote Controller User Manual
Ningbo Yaling Electrical Appliance Co., Ltd Remote Controller
user manual
Instruction manual for YLT-10A, YLT-10B
YLT-10A, YLT-10B is a set of remote control switch for indoor/outdoor use.
YLT-10B is a receiver and YLT-10A is a transmitter.
Specification:
Electrical rating: 125VAC 60Hz, 8A tungsten
Control distance: 60 feet
Installation:
1, One receiver supplied with transmitter.
2, Plug receiver into 3-wire outlet, make sure that the red indicator is lit, then plug the lights or
device to be switched into receiver.
3, The device must be mounted in a vertical position with the receptacle facing downwards and
not reaching the ground level.
4, Red indicator light when the outlet has power.
Operation:
Press the “ON” button on the transmitter to turn the receiver “ON”.
Press the “OFF” button on the transmitter to turn the receiver “OFF”.
Battery replacement:
1, Move the battery cover from back of transmitter.
2, Replace with type 23A 12V battery.
3, Note polarity.
4, Dispose of old battery properly.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.