Ningbo Yaling Electrical Appliance YLT-11C Remote Control Transmitter User Manual SA5YLT 11C REV1

manual

Operation Instruction:

In panel of transmitter , it has 2 buttons. Signification of buttons is: ON, OFF.

1.The general function of buttons:

a. ON : Press the transmitter key “ON” can turn into active the receiver.

b.OFF: Press the transmitter key “OFF” can turn into active the receiver.

2.Specification:

Electrical rating: 25VAC 5A resistive, 125VAC 600W Tungsten

Control distance: 60 feet

3.Installation:

1, One receiver supplied with transmitter.

2, Plug receiver into 3-wire outlet, make sure that the red indicator is lit, then plug the

lights or device to be switched into receiver.

3, The device must be mounted in a vertical position with the receptacle facing

downwards and not reaching the ground level.

4.Battery replacement:

1, Move the battery cover from back of transmitter.

2, Replace with type CR2032 3V battery.

3, Note polarity.

4, Dispose of old battery properly.

Caution :

Changes or modifications not expressly approved by the party responsible for compliance could void the us

er's authority to operate the equipment.