Ningbo Yaling Electrical Appliance YLT-6C Remote Controller User Manual Instruction manual

Users Manual

Instruction manual for YLT-6, YLT-6C

YLT-6, YLT-6C is a set of remote control switch for indoor/outdoor use.

YLT-6 is a receiver and YLT-6C is a transmitter.

Specification:

Electrical rating: 120Vac 60Hz 15A resistive

120Vac 60Hz 8A tungsten

Control distance: 60 feet

Installation:

1, One receiver supplied with transmitter.

2, Plug receiver into 3-wire outlet, make sure that the red indicator is lit, then plug the lights or

device to be switched into receiver.

3, The device must be mounted in a vertical position with the receptacle facing downwards and

not reaching the ground level.

4, Red indicator light is lit when the receiver is “OFF”. Yellow indicator light is lit when the

receiver is “ON”

Operation:

Press the “ON” button on the transmitter to turn the receiver “ON”.

Press the “OFF” button on the receiver to turn the receiver “OFF”.

Battery replacement:

1, Move the battery cover from back of transmitter.

2, Replace with type 23A 12V battery.

3, Note polarity.

4, Dispose of old battery properly.

Notice:

Changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment.