Ninja User Manual BL660

User Manual: Ninja User Manual - BL660 Ninja® Professional Blender with Single Serve (BL660) | Home Blender

Open the PDF directly: View PDF PDF.
Page Count: 16

ninjakitchen.com
1 877 646-5288
BL660
OWNER’S GUIDE
®
11-877-646-5288
IMPORTANT SAFETY INSTRUCTIONS
For Household Use Only
WHEN USING ELECTRICAL APPLIANCES,
BASIC SAFETY PRECAUTIONS SHOULD
ALWAYS BE FOLLOWED, INCLUDING THE
FOLLOWING:
READ ALL INSTRUCTIONS BEFORE USING
YOUR NINJA® PROFESSIONAL BLENDER
WITH NUTRI NINJA® CUPS.
POLARIZED PLUG
WARNING: To reduce the risk of
electric shock, this appliance has a polarized plug
(one blade is wider than the other). This plug will
fit into a polarized outlet only one way. If the plug
does not fit fully into the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician
to install the proper outlet. DO NOT modify the
plug in any way.
WARNING: Extension cords are
not recommended for use with this
product.
3 WARNING: Stacked Blade Assembly
is sharp and not locked in place. If
using the pour spout, ensure the lid is
fully locked onto the pitcher. If pouring
with the lid removed, carefully remove
the Stacked Blade Assembly first,
holding it by the shaft. Failure to do so
will result in a risk of laceration.
4 CAUTION: Do not blend hot liquids,
doing so may cause excessive pressure
build-up, resulting in risk of the user
being burned.
5 CAUTION: Remove the Nutri Ninja
Blade Assembly from the Nutri Ninja
Cup upon completion of blending. Do
not store ingredients before or after
blending them in the cup with the
blade assembly attached. Some foods
may contain active ingredients or
release gases which will expand if left
in a sealed container, resulting in
excessive pressure buildup that can
pose a risk of injury. For ingredient
storage in the cup, use only To-Go Lid
to cover.
6 CAUTION: We do not recommend
grinding in any of our Nutri Ninja® cups.
7 To protect against electrical shock, do not
submerge the appliance or allow the power
cord to come into contact with water or any
other liquid.
8 DO NOT allow the appliance to be used by
children. Close supervision is necessary
when used near children. This is not a toy.
9 Never leave an appliance unattended when
inuse.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK OR INJURY:
1 WARNING: Remove utensils prior to
processing. Failure to remove may
cause the jar to be damaged or to
shatter which may cause personal
injury.
2 WARNING: Stacked Blade Assembly
is sharp, not locked in place and
removable, handle with care. When
handling the Stacked Blade Assembly,
always hold it by the shaft. Failure to
do so will result in a risk of laceration.
2
ninjakitchen.com
10 Appliance accessories are not intended to
be used in the microwave as it may result in
damage to the accessories.
11 Turn the appliance Off and remove the
power cord from the electrical outlet
when not in use, before assembling or
disassembling parts and before cleaning.
To unplug, grasp the plug and pull from the
electrical outlet. Never pull from the power
cord.
12 DO NOT abuse the power cord. Never carry
the appliance by the power cord or yank it
to disconnect from electrical outlet; instead
grasp the plug and pull to disconnect.
13 DO NOT operate any appliance with a
damaged cord or plug, or after the appliance
malfunctions, has been dropped or damaged
in any manner. This appliance has no
serviceable parts. Return the appliance to
SharkNinja Operating LLC for examination,
repair or adjustment.
14 DO NOT let the power cord hang over
the edge of table or counter or touch hot
surfaces such as the stove.
15 Always use appliance on a dry, level surface.
16 Keep hands, hair, clothing, as well as
utensils out of container while processing to
reduce the risk of severe injury to persons
or damage to the appliance. A scraper may
be used but only when the appliance is not
running.
17 Avoid contact with moving parts.
18 DO NOT attempt to sharpen blades.
19 DO NOT use the appliance if blade
assemblies are bent or damaged.
20 To reduce risk of injury, never place the
blade assemblies on the base without
the pitcher or Nutri Ninja® cup properly
attached.
21 DO NOT operate this appliance on or near
any hot surfaces (such as gas or electric
burner or in a heated oven).
22 The use of attachments or accessories
including canning jars, not recommended by
the manufacturer may result in fire, electric
shock or personal injury.
23 DO NOT remove the container from the
motor base while the appliance is in
operation.
24 To reduce the risk of injury, NEVER operate
the appliance without the lid in place; DO
NOT try to defeat the interlock mechanism;
make sure that the attachment is properly
installed before operating the appliance.
25 DO NOT expose containers to extreme
temperature changes.
26 DO NOT overfill.
27 DO NOT operate the appliance empty.
28 If the appliance overheats, a thermal switch
will become activated and shut off the
motor. To reset, unplug the appliance and let
it cool down for approximately 15 minutes
before using again.
29 THIS PRODUCT IS INTENDED FOR
HOUSEHOLD USE ONLY. Do not use
this appliance for anything other than its
intended use. Do not use outdoors.
30 The maximum rating is based on the
Stacked Blade Assembly (pitcher) that drives
the greatest power and other recommended
attachments may draw significantly less
power or current.
SAVE THESE
INSTRUCTIONS
31-877-646-5288
THIS BOOK COVERS MODEL NUMBER:
BL660
TECHNICAL SPECIFICATIONS
Voltage: 120V., 60Hz.
Power: 1100 Watts
Pitcher Capacity: 72 oz (2.15 L, 9 cups)
MAX Liquid Capacity: 64 oz. (1.9 L, 8 cups)
Nutri Ninja® Cup Capacity: 16 oz (470 ml, 2 cups)
4
ninjakitchen.com
Contents
Getting to Know Your Ninja Professional Blender with Nutri Ninja Cups ................................... 5
Before First Use .................................................................................................................. 7
Assembly & Use of the Pitcher ............................................................................................. 8
Assembly & Use of the Nutri Ninja® Cup ............................................................................ 10
Care & Maintenance ........................................................................................................ 11
Speed Chart .................................................................................................................... 12
Troubleshooting Guide ....................................................................................................... 12
Replacement Parts ............................................................................................................ 12
Warranty & Registration ..................................................................................................... 14
Thank you for
purchasing
the Ninja®
Professional
Blender with
Nutri Ninja®
Cups.
51-877-646-5288
e Pitcher Lid with Locking Handle
f Stacked Blade Assembly
g Motor Base
h Power Cord (not shown)
a Nutri Ninja® Cup (x2)
b To-Go Lids (x2)
c Nutri Ninja Blade Assembly
d Pitcher
a
b
d
e
g
f
c
Getting To Know Your Ninja® Professional Blender with Nutri Ninja® Cups
6
ninjakitchen.com
FEATURES:
• Ninja® Blade Technology
• 72 oz. Pitcher (MAX Liquid Capacity: 64 oz.) - BPA Free
• Nutri Ninja® Cups - BPA Free
• Cord Storage
• Lock-On Lid, Featuring Pour Spout
• Easy-to-Clean Electronic Control Panel
* Extract a drink containing vitamins and nutrients from fruits and vegetables
The Ninja® Professional Blender with Nutri Ninja® Cups is a high powered innovative tool with a compact design and
outstanding performance. It is perfect for ice crushing, chopping, blending, and Nutrient and Vitamin Extraction*.
71-877-646-5288
Before First Use
CAUTION: Do not immerse the motor base
into water or any other liquid.
1 Remove all packaging material and labels from the appliance.
Separate/remove all parts from each other.
2 Wash the lids, pitcher, Nutri Ninja cups and blade
assemblies in warm, soapy water. When washing the
blade assemblies, use a dish-washing utensil with a
handle to avoid direct hand contact with blades.
WARNING: Handle the Stacked Blade Assembly
and Nutri Ninja Blade Assembly with care when
washing, as the blades are sharp.
3 Handle blade assemblies with care to avoid contact
with sharp edges. Rinse and air dry thoroughly.
4 The pitcher, Nutri Ninja cups, lids, Stacked Blade
Assembly and Nutri Ninja Blade Assembly are all
dishwasher safe. It is recommended that the lids and
blade assemblies be placed on the top rack. Ensure
the blade assembly is removed from the cup or pitcher
before placing in the dishwasher.
5 Wipe the motor base clean with a damp cloth.
PLEASE KEEP THESE IMPORTANT
SAFEGUARDS IN MIND WHEN USING THE
APPLIANCE:
IMPORTANT: Make sure that the motor base
is plugged in for use.
IMPORTANT: Never add ingredients into the
container before placing the attachment in
first.
IMPORTANT: Attachments are not
interchangeable.
IMPORTANT: DO NOT attempt to operate the
appliance without the lid on.
IMPORTANT: Never run the appliance empty.
IMPORTANT: Appliance accessories are not
intended to be used in the microwave as it
may result in damage to the accessories.
WARNING: Stacked
Blade Assembly is
sharp and not locked in
place. If using the pour
spout, ensure the lid
is fully locked onto the
blender pitcher. Failure
to do so will result in a
risk of laceration.
WARNING: Stacked
Blade Assembly is
sharp and not locked
in place. If pouring
with the lid removed,
carefully remove
the Stacked Blade
Assembly first, holding
it by the shaft. Failure
to do so will result in a
risk of laceration.
8
ninjakitchen.com
1 Review warning and caution statements above before
proceeding to number 2.
2 Place the motor base on a clean, dry, level surface such
as a counter or table top.
3 Align and lower the pitcher onto the motor
base. (Fig. 1) Handle should be aligned slightly to the
right of the “LOCK” symbol on the motor base.
4 Rotate the blender pitcher clockwise until it clicks in
place. As the pitcher rotates, it will lower and the safety
tabs on the bottom of the pitcher will slide under the
safety tabs on the top of the motor base. (Fig. 2)
5 The pitcher can be placed on the motor base two ways;
the handle can be on the front right corner or the front
left corner. (Fig. 3a, Fig. 3b)
6 Holding the Stacked Blade Assembly by the top of the
shaft, place it onto the drive gear inside the pitcher.
Ensure that the Stacked Blade Assembly is seated
properly and is standing upright. (Fig. 4)
NOTE: The Stacked Blade Assembly will fit loosely on
the drive gear.
7 Add the ingredients to the pitcher, making sure that
they do not exceed the highest measured marking line
on the side of the pitcher.
NOTE: If you need to add additional ingredients while
the appliance is processing, open the pour spout cap
and pour the ingredients in through the opening.
NOTE: When blending any kind of liquids, such as
mixtures of any drinks or smoothies, do not exceed the
“Max liquid” mark (64 oz.) on the pitcher.
8 Plug the power cord into the electrical outlet and press
the power button ( ).
IMPORTANT: As a safety feature, the power
button ( ) will flash and the motor will not work
if the pitcher and lid are not installed correctly.
When the pitcher and lid are installed properly,
the power button ( ) will be solid, indicating that
the appliance is ready for use.
9 Holding the lid by the handle in the upright
position, place it on top of the pitcher aligning the
arrow ( ) located on the lid with the arrow ( ) located
on the pitcher’s handle. (Fig. 5)
ASSEMBLY
It’s best to add the liquid ingredients first and then the dry ingredients.
Fig. 4
Fig. 3a
Fig. 5Fig. 3b
OR
WARNING: Handle the Stacked Blade Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the pitcher to be damaged or
to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
IMPORTANT: Make sure that the motor base is plugged in for use.
Fig. 2Fig. 1
Assembly & Use of the Pitcher
91-877-646-5288
Assembly & Use of the Pitcher - cont.
USE REMOVAL
15 For thicker consistencies, remove the lid and Stacked
Blade Assembly carefully (by its shaft). To remove
the lid, press the release button on the lid, pull the lid
handle up to a 90° angle and lift the lid off the pitcher.
(Fig. 9) Place Stacked Blade Assembly away from the
work area to avoid accidental contact. Finally, empty
contents from the pitcher.
16 Make sure that the unit is unplugged when not in use.
10 Review warning and caution statements on page 8
before proceeding.
11 Select the speed that best suits your needs. (Fig. 6)
NOTE: Pulse ingredients for even chopping by pressing
down in short intervals.
12 When you have reached your desired consistency, stop
the appliance by pressing the power button ( ) and
wait for the Stacked Blade Assembly to stop turning.
(Fig. 7)
13 Turn the pitcher counter-clockwise to lift off the base.
(Fig. 8)
WARNING: Never insert your hands in the pitcher
as the Stacked Blade Assembly is sharp. Always
use a spatula to dislodge food that has stuck to
the sides of the pitcher.
14 Depending on the consistency of the contents in the
container, open the pour spout and use the spout to
empty liquid contents.
Fig. 6 Fig. 7 Fig. 9Fig. 8
10
ninjakitchen.com
Assembly & Use of the Nutri Ninja® Cup
For best results, use short “PULSES”... Practice makes perfect!!
Fig. 1
1 Review warning and caution statements above before
proceeding to number 2.
2 Place the motor base on a clean, dry, level surface such
as a counter or table top.
3 Add ingredients to the Nutri Ninja cup.
NOTE: Do not overfill! To avoid spilling, do not add
ingredients past the “Max” fill line.
4 Place the Nutri Ninja Blade Assembly onto the cup and
screw it tightly until you have a good seal. (Fig. 1)
5 Turn the Nutri Ninja cup upside down and place it
onto the motor base, aligning the tabs on the cup with
the motor base. Turn the Nutri Ninja cup clockwise to
lock into place. You will hear a click when the lock is
engaged. (Fig. 2)
6 Press down on the Single Serve button in short
intervals to activate. (Fig. 3)
Fig. 2 Fig. 3 Fig. 4 Fig. 6
ASSEMBLY USE REMOVAL
WARNING: Handle the Nutri Ninja Blade Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the Nutri Ninja cup to be
damaged or to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
CAUTION: Remove the Nutri Ninja Blade Assembly from the Nutri Ninja cup upon completion of blending. Do
not store ingredients before or after blending them in the cup with the blade assembly attached. Some foods
may contain active ingredients or release gases that will expand if left in a sealed container, resulting in
excessive pressure buildup that can pose a risk of injury. For ingredient storage in the cup, use only To-Go
Lid to cover.
IMPORTANT: Make sure that the motor base is plugged in for use.
Fig. 5
7 When you have reached your desired consistency, stop
the appliance by removing your hand from the Single
Serve button.
8 To remove the Nutri Ninja cup, ensure that the motor
has stopped running. Then turn it counter-clockwise
(Fig. 4) and pull straight up to remove. (Fig. 5)
9 Turn the cup upright and remove the Nutri Ninja Blade
Assembly by twisting the blade assembly counter-
clockwise. (Fig. 6)
10 Do not store blended contents with the Nutri Ninja
Blade Assembly attached.
11 Place the To-Go lid onto the Nutri Ninja cup, twist to
seal and enjoy!
12 For storage, only use the To-Go lid to cover.
13 Be sure to store the Nutri Ninja Blade Assembly
attached to an empty cup when not in use.
14 Make sure that the motor base is unplugged when not
in use.
11 1-877-646-5288
Care & Maintenance
HOW TO STORE
1 Store the Ninja® Professional Blender upright with the
blade assembly inside the corresponding container with
the lid secured on top. Do not place anything on top.
Store the rest of the attachments in a safe place where
they will not be damaged and won’t cause harm. Insert
the power cord into the cord storage area located in the
back of the motor base.
NOTE: Do not store blended or unblended
ingredients in the Nutri Ninja cup with the blade
assembly attached.
Cord Storage
RESETTING THE MOTOR THERMOSTAT
The Ninja® Professional Blender features a unique safety
system which prevents damage to the unit’s motor and drive
system should you inadvertently overload your appliance.
If the appliance is being overloaded, the motor will
stop. Allow the appliance to cool for approximately
15 minutes. To reset the appliance, follow the resetting
procedure below:
1 Unplug the appliance from the electrical outlet.
2 Remove and empty the container and ensure that no
food is jamming the blade assemblies.
3 Allow the appliance to cool for approximately 15
minutes.
4 Re-install the container onto the base and re-plug the
appliance into the electrical outlet.
5 Proceed to use the appliance as before making sure not
to exceed the recommended maximum capacities.
HOW TO CLEAN
CAUTION: Make sure that the motor base is
unplugged from the power source before inserting
or removing any attachment and before cleaning.
CAUTION: DO NOT immerse the motor base into
water or any other liquid.
1 Separate/remove all parts from each other.
2 Hand Washing: Wash the lids, pitcher, Nutri Ninja®
cups and blade assemblies in warm, soapy water.
When washing the blade assemblies, use a dish-
washing utensil with a handle to avoid direct hand
contact with blades. Handle blade assemblies with care
to avoid contact with sharp edges. Rinse and air dry
thoroughly.
Dishwasher: The containers, lids and blade
assemblies are all dishwasher safe. The lids and blade
assemblies are top rack dishwasher safe. Ensure the
blade assemblies are removed from the containers
before placing in the dishwasher.
WARNING: Handle the blade assemblies with care
when washing, as the blades are sharp. Contact
with the blades’ edges can result in laceration.
3 Wipe the motor base clean with a damp cloth
.
Please call customer service if any servicing needs to
be performed on the appliance at 1-877-646-5288.
12
ninjakitchen.com
Speed Chart
Troubleshooting Guide
To order additional parts and accessories, please visit our website: ninjakitchen.com or feel
free to contact customer service: 1-877-646-5288.
Replacement Parts
IMPORTANT: Do not run the appliance over 4 minutes at a time to prevent overheating of the appliance.
* When blending sauces and soups, make sure they’re cooled to room temperature first - Ninja
®
containers are not intended for
hot blending.
BUTTON FUNCTION USE
POWER On/Off Always turn appliance 'Off' when not in use.
1Processing &
Mixing
Use to mix thin batters, gravies and marinades, scramble eggs, puree cooked
foods and uncooked fruits and chop vegetables for dips and salsa.
2Blending
Use to grate hard cheeses, cream soups*, beat dips, grind nuts, thorough
chopping, blend sauces* and spreads. Blend mixed drinks, powdered drinks
or milk shakes.
3
Pureeing,
Liquefying & Ice
Crushing
Use to mix smoothies, frappes, liquefy thick mixtures and blend whole
fruits and vegetables. Crush ice cubes for snow cones, chilled beverages or
frozen slushes
PULSE
Controlled
Processing &
Bursts of Power
Use to control chopping and processing.
PROBLEMS POSSIBLE REASONS & SOLUTIONS
Control Panel Lights Are
Blinking, Motor Doesn’t
Start or Blade Assembly
Doesn’t Rotate.
Make sure the pitcher is securely placed on motor base.
Make sure the lid is securely on pitcher in the correct position (align arrows).
The blender is turned 'Off'. Press the power button ( ) to turn 'On'.
Check that the plug is securely inserted into the electrical outlet.
Check the fuse or circuit breaker.
The unit has overheated. Unplug and wait approximately 15 minutes before using again.
Food is Unevenly Chopped.
Either you are chopping too much food at one time, you are chopping food with different
textures or the pieces are not of even size. Process smaller amounts per batch.
Food is Chopped Too Fine or
is Too Watery. The food has been over processed. Use pulse button for controlled processing.
Food Collects on the Lid or
on the Sides of the Pitcher. The mixture is too thick. Add more liquid.
You Cannot Achieve Snow
From Solid Ice.
Do not use ice that has been sitting out or has started to melt. Use ice straight from
the freezer.
CAUTION: DO NOT process dry ingredients without adding liquid to the cup. This product is not intended for
dry blending.
13 1-877-646-5288
Notes
14
ninjakitchen.com
ONE (1) YEAR
LIMITED WARRANTY
The 1-Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja Operating
LLC. Warranty coverage applies to the original owner and to the original product only and is not
transferable.
SharkNinja warrants that the unit shall be free from defects in material and workmanship for a period of
1 year from the date of purchase when it is used under normal household conditions and maintained
according to the requirements outlined in this Owner’s Guide, subject to the following conditions and
exclusions.
What is covered by my warranty?
1. The original unit and/or non-wearable components deemed defective, in SharkNinja’s sole discretion,
will be repaired or replaced for up to 1 year from the original purchase date.
2. In the rare event that a replacement unit is issued, the warranty coverage ends six months after the
receipt date of the replacement unit or the remainder of the existing warranty, whichever is greater. If
the unit is replaced, SharkNinja reserves the right to replace the unit with one of equal or greater value.
What is not covered by my warranty?
Our Customer Care/Product Specialists are available to provide all the warranty service options available
to you, including the possibility of upgrading to our VIP Warranty Service Options for select product
categories.
1. Normal wear and tear of wearable parts (including all blending vessels, lids, blades and blender base)
which require regular maintenance and/or replacement to ensure the proper functioning of your unit are
not covered by this warranty.
2. Any unit that has been tampered with or used for commercial purposes.
3. SharkNinja will cover the cost for the customer to send the unit to us for repair or replacement. A fee
of $19.95 for return shipping costs will be charged at the time of return shipment of the repaired or
replacement unit.
4. Damage caused by misuse, abuse, or negligent handling, or damage due to mishandling in transit.
5. Consequential and incidental damages.
6. Defects caused by or resulting from damages from shipping or from repairs, service, or alteration to the
product or any of its parts which have been performed by a repair person not authorized by SharkNinja.
7. Products purchased, used or operated outside of North America.
Problems with your unit/How to get service:
If your appliance fails to operate properly while in use under normal household conditions within the
warranty period, visit ninjakitchen.com for product care/maintenance self-help. Our customer care and
product specialists are also available at 1-877-646-5288 to assist with product support and warranty
service options.
How to initiate a warranty claim:
You can call 1-877-646-5288 to have a customer care specialist assist you. Please note, you must call
1-877-646-5288 to initiate a warranty claim. Return and Packing Instruction information will be provided at
that time.
Replacement parts are available for purchase at ninjakitchen.com. For more information on what is
classified as wearable and non-wearable parts, please visit ninjakitchen.com/warranty.
This warranty gives you specific legal rights, and you may also have other rights that vary from state to state.
Some states do not permit the exclusion or limitation of incidental or consequential damages, so the above
may not apply to you.
How to register your product:
Please visit registeryourninja.com or call 1-877-646-5288 to register your new Ninja® product. You will be
asked to provide the store name, date of purchase and model number along with your name and address.
The registration will enable us to contact you in the unlikely event of a product safety notification. By
registering you acknowledge to have read and understood the instructions for use, and warnings set forth in
the accompanying instructions.
SharkNinja Operating LLC
US: Newton, MA 02459
CAN: Ville St-Laurent, QC H4S 1A7
1-877-646-5288
ninjakitchen.com
Ninja and Nutri Ninja are registered trademarks of SharkNinja Operating LLC.
Illustrations may differ from actual product. We are constantly striving to improve our
products, therefore the specifications contained herein are subject to change without notice.
For SharkNinja U.S. Patent information visit sharkninja.com/USPatents.
© 2017 SharkNinja Operating LLC
BL660_30_IB_170112_4
PRINTED IN CHINA

Navigation menu