Nokelock Technology D-WM Smart Lock User Manual klic
Shenzhen Nokelock Technology Co., Ltd. Smart Lock klic
User Manual
Include: Padlock, Manual, QR code.
Apply to Bluetooth & Password Padlock
Appearance illustration
Power
Light①
Key Password
Charging port
APP installation
★ Scan the QR Code
to download and install APP.
①The light will be turn red when lock is
charging and turn off after fulling of power.
Product : Smart Lock
Model: D5791WM
APP function illustration
①
①Lock management portal
②Unbind the lock
③Lock sharing function
④View usage records
⑤Settings
⑥Change Key Password
②
③
④
⑤
⑥
2.Adding device: 3 options
3.Bluetooth Unlock
★ ★[Recommend] Scan the QR Code in the
packing box
★ Choose Bluetooth, search device following the
guidelines.
★Entering the device No. on the lock or QR code
to add.
（Note: the device can only be bound for one account at the
time. So please unbind if need to change the user)
Turn on Bluetooth > Press power button on lock>Click
unlock button>Unlocked...... >Unlock successfully.( APP
shows power present and connection status at the same time.)
1.Register
Registering by E-mail: Click Registration – Enter
email address-- Obtain verification code-- Set
password—Log in.
4.Key Password Unlock
Setting – Change Key Password - Input Password -
Comfirm
8.Personal Center
You can do the followings:
Revise personal information
My friends: Add new friend by scanning QR code
or searching account or view friend's request list.
Usage record: including unlocking, sharing and
alarm records.
Settings: including change the theme color of
APP, simple instruction, firmware update, about
us, and log out information.
Check unlocking & shared record and location
information.
6.Unbinding
Means delete the device (including usage and
shared records, USE CAUTION.)
7.Usage record
5.Authorization Management
Authorize and share the lock to your friends.
(Note: all authorization is only available for added friends:
My center - my friends –Add by scanning friends’ app QR
or account number).
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject
to the following two conditions (1)this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Statement
The product is more than 20 cm away from the human body
Tzumi Electronics
WEB丨www.tzumi.com
TEL丨001 646 351 1960
CONTACT US