Nokia Bell 34003800FM20 FastMile Compact User Manual Nokia FastMile Outdoor Unit

Download:
Mirror Download [FCC.gov]
Document ID	4112989
Application ID	+qLCjDmZw7UaCxsTipeUsg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	82.78kB (1034766 bits)
Date Submitted	2018-12-21 00:00:00
Date Available	2018-12-21 00:00:00
Creation Date	2018-10-23 19:15:22
Producing Software	Acrobat Distiller 10.1.16 (Windows)
Document Lastmod	2018-12-21 09:36:33
Document Title	Nokia FastMile Outdoor Unit User Manual
Document Creator	FrameMaker 11.0.2
Document Author:	Nokia

Nokia FastMile Outdoor Unit User Manual
FastMile
Nokia FastMile Outdoor Unit User Manual
3TG-00088-AAAA-TCZZA
Issue: 01P03
October 2018
Nokia — Proprietary and confidential
Use pursuant to applicable agreements
Nokia FastMile Outdoor Unit User Manual
Nokia is a registered trademark of Nokia Corporation. Other products and company
names mentioned herein may be trademarks or tradenames of their respective
owners.
The information presented is subject to change without notice. No responsibility is
assumed for inaccuracies contained herein.
© 2018 Nokia.
Contains proprietary/trade secret information which is the property of Nokia and must
not be made available to, or copied or used by anyone outside Nokia without its
written authorization. Not to be used or disclosed except in accordance with
applicable agreements.
3TG-00088-AAAA-TCZZA
Issue: 01P03
Nokia FastMile Outdoor Unit User Manual
Preface
1 Preface
This preface provides general information about the user manual for the Nokia
FastMile Outdoor Unit.
1.1 Scope
This document provides an overview of the Nokia FastMile Outdoor Unit along with
information about safety, installing, and troubleshooting the Nokia FastMile Outdoor
Unit.
1.2 Audience
This document is intended for planners, administrators, operators, and maintenance
personnel involved in installing, upgrading, or maintaining the Nokia FastMile
Outdoor Unit.
Table 1 provides a summary of how the main content of this manual is organized.
Table 1
Main content of manual
Chapter
number
Chapter content
Description
This
chapter
Document preface
Defines the purpose, scope, and intended audience of this
document; explains how information is organized in this document
Overview
Brief overview of the Nokia FastMile Outdoor Unit
Installation
Detailed installation steps for the Nokia FastMile Outdoor Unit
Troubleshooting
Resolutions for problems that might be faced during installation
1.3 Required knowledge
The reader must be familiar with general telecommunications principles.
1.4 Acronyms and initialisms
The expansions and optional descriptions of most acronyms and initialisms used in
this document appear in the glossary at the back of the document.
Issue: 01P03
3TG-00088-AAAA-TCZZA
Preface
Nokia FastMile Outdoor Unit User Manual
1.5 Assistance and ordering phone numbers
Nokia provides global technical support through regional call centers. Phone
numbers for the regional call centers are available at the following URL:
http://support.alcatel-lucent.com.
For ordering information, contact your Nokia sales representative.
1.6 Nokia quality processes
Nokia’s FastMile Outdoor Unit quality practices are in compliance with TL 9000
requirements.These requirements are documented in the Fixed Networks Quality
Manual 3FQ-30146-6000-QRZZA. The quality practices adequately ensure that
technical requirements and customer end-point requirements are met. The customer
or its representatives may be allowed to perform on-site quality surveillance audits,
as agreed upon during contract negotiations.
1.7 Safety information
For safety information, see the appropriate safety guideline chapters.
1.8 Documents
Documents are available from Nokia using ALED or OLCS.
Procedure 1
To download a ZIP file package of the customer documentation
Navigate to http://support.alcatel-lucent.com and enter your user name and password. If you
are a new user and require access to this service, please contact your Nokia sales
representative.
From the Technical Content for drop-down menu, choose the product.
Click on Downloads: Electronic Delivery.
Choose Documentation from the drop-down menu and click Next.
3TG-00088-AAAA-TCZZA
Issue: 01P03
Nokia FastMile Outdoor Unit User Manual
Preface
Select the image from the drop-down menu and click Next.
Follow the on-screen directions to download the file.
Procedure 2
To access individual documents
Individual PDFs of customer documents are also accessible through the Nokia Customer Support
website.
Navigate to http://support.alcatel-lucent.com and enter your user name and password. If you
are a new user and require access to this service, please contact your Nokia sales
representative.
From the Technical Content for drop-down menu, choose the product.
Click on Manuals and Guides to display a list of customer documents by title and part
number. You can filter this list using the Release drop-down menu.
Click on the PDF to open or save the file.
1.9 Special information
The following are examples of how special information is presented in this document.
Danger — Danger indicates that the described activity or
situation may result in serious personal injury or death; for
example, high voltage or electric shock hazards.
Warning — Warning indicates that the described activity or
situation may, or will, cause equipment damage or serious
performance problems.
Caution — Caution indicates that the described activity or
situation may, or will, cause service interruption.
Issue: 01P03
3TG-00088-AAAA-TCZZA
Preface
Nokia FastMile Outdoor Unit User Manual
Note — A note provides information that is, or may be, of
special interest.
1.9.1
Steps with options or substeps
When there are options in a step, they are identified by letters. When there are
required substeps in a step, they are identified by roman numerals.
Procedure 3
Example of options in a step
At step 1, you must choose option a or b.
Procedure 4
This step offers two options. You must choose one of the following:
This is one option.
This is another option.
You must perform this step.
Example of required substeps in a step
At step 1, you must perform a series of substeps within the step.
This step has a series of substeps that you must perform to complete the step. You must
perform the following substeps:
This is the first substep.
ii
This is the second substep.
iii
This is the third substep.
You must perform this step.
3TG-00088-AAAA-TCZZA
Issue: 01P03
Nokia FastMile Outdoor Unit User Manual
1.10
Preface
Multiple PDF document search
You can use Adobe Reader Release 6.0 and later to search multiple PDF files for a
common term. Adobe Reader displays the results in a single display panel. The
results are grouped by PDF file, and you can expand the entry for each file.
Note — The PDF files in which you search must be in the same
folder.
Procedure 5
To search multiple PDF files for a common term
Open Adobe Acrobat Reader.
Choose Edit→Search from the Acrobat Reader main menu. The Search PDF panel appears.
Enter the search criteria.
Click on the All PDF Documents In radio button.
Select the folder in which to search using the drop-down menu.
Click on the Search button.
Acrobat Reader displays the search results. You can expand the entries for each document
by clicking on the + symbol.
Issue: 01P03
3TG-00088-AAAA-TCZZA
Nokia FastMile Outdoor Unit User Manual
ETSI environmental and CRoHS guidelines
2 ETSI environmental and CRoHS
guidelines
This chapter provides information about the ETSI environmental China Restriction of
Hazardous Substances (CRoHS) regulations that govern the installation and
operation of Nokia FastMile Outdoor Unit equipment. This chapter also includes
environmental operation parameters of general interest.
2.1 Environmental labels
This section describes the environmental instructions that are provided with the
customer documentation, equipment, and location where the equipment resides.
2.1.1
Overview
CRoHS is applicable to Electronic Information Products (EIP) manufactured or sold
and imported in the territory of the mainland of the People’s Republic of China. EIP
refers to products and their accessories manufactured by using electronic
information technology, including electronic communications products and such
subcomponents as batteries and cables.
2.1.2
Environmental related labels
Environmental labels are located on appropriate equipment. The following are
sample labels.
2.1.2.1
Products below Maximum Concentration Value
(MCV) label
Figure 1 shows the label that indicates a product is below the maximum
concentration value, as defined by standard SJ/T11363-2006 (Requirements for
Concentration Limits for Certain Hazardous Substances in Electronic Information
Products). Products with this label are recyclable. The label may be found in this
documentation or on the product.
Issue: 01P03
3TG-00088-AAAA-TCZZA
ETSI environmental and CRoHS guidelines
Figure 1
Nokia FastMile Outdoor Unit User Manual
Products below MCV value label
18986
2.1.2.2
Products containing hazardous substances above
Maximum Concentration Value (MCV) label
Figure 2 shows the label that indicates a product is above the maximum
concentration value, as defined by standard SJ/T11363-2006 (Requirements for
Concentration Limits for Certain Hazardous Substances in Electronic Information
Products). The number contained inside the label indicates the Environment-Friendly
User Period (EFUP) value. The label may be found in this documentation or on the
product.
10
3TG-00088-AAAA-TCZZA
Issue: 01P03
Nokia FastMile Outdoor Unit User Manual
Figure 2
ETSI environmental and CRoHS guidelines
Products above MCV value label
18985
Together with major international telecommunications equipment companies, Nokia
has determined it is appropriate to use an EFUP of 50 years for network
infrastructure equipment and an EFUP of 20 years for handsets and accessories.
These values are based on manufacturers' extensive practical experience of the
design, manufacturing, maintenance, usage conditions, operating environments,
and physical condition of infrastructure and handsets after years of service. The
values reflect minimum values and refer to products operated according to the
intended use conditions. See “Hazardous Substances Table (HST)” for more
information.
2.2 Hazardous Substances Table (HST)
This section describes the compliance of the Nokia FastMile Outdoor Unit
equipment to the CRoHS standard when the product and subassemblies contain
hazardous substances beyond the MCV value. This information is found in this user
documentation where part numbers for the product and subassemblies are listed. It
may be referenced in other documentation that describes the Nokia FastMile
Outdoor Unit equipment.
In accordance with the People’s Republic of China Electronic Industry Standard
Marking for the Control of Pollution Caused by Electronic Information Products
(SJ/T11364-2006), customers may access the Nokia Hazardous Substance Table,
in Chinese, from the following location:
• http://www.alcatel-sbell.com.cn/wwwroot/images/upload/private/1/media/ChinaRo
HS.pdf
Issue: 01P03
3TG-00088-AAAA-TCZZA
11
ETSI environmental and CRoHS guidelines
Nokia FastMile Outdoor Unit User Manual
2.3 Other environmental requirements
Observe the following environmental requirements when handling Nokia FastMile
Outdoor Unit equipment.
2.3.1
Environmental requirements
See chapter 9 in this guide for more information about temperature ranges for the
Nokia FastMile Outdoor Unit equipment and other Nokia FastMile Outdoor Unit
specifications.
2.3.2
Storage
According to ETS 300-019-1-1 - Class 1.1, storage of Nokia FastMile Outdoor Unit
equipment must be in Class 1.1, weather-protected, temperature-controlled
locations.
2.3.3
Transportation
According to EN 300-019-1-2 - Class 2.3, transportation of Nokia FastMile Outdoor
Unit equipment must be in packed, public transportation.
2.3.4
Stationary use
According to EN 300-019-1-3 - Class 3.1/3.2/3.E, stationary use of Nokia FastMile
Outdoor Unit equipment must be in a temperature-controlled location, with no rain
allowed, and with no condensation allowed.
2.3.5
Thermal limitations
The thermal limitations for the Nokia FastMile Outdoor Unit equipment are:
• operating temperature (ambient): –30°C to 65°C (–22°F to 149°F)
• operating relative humidity: 5% to 85% relative humidity, non-condensing
• short-term relative humidity: 5% to 93% relative humidity, non-condensing
12
3TG-00088-AAAA-TCZZA
Issue: 01P03
Nokia FastMile Outdoor Unit User Manual
2.3.6
ETSI environmental and CRoHS guidelines
Material content compliance
European Union (EU) Directive 2002/95/EC, “Restriction of the use of certain
Hazardous Substances” (RoHS), restricts the use of lead, mercury, cadmium,
hexavalent chromium, and certain flame retardants in electrical and electronic
equipment. This Directive applies to electrical and electronic products placed on the
EU market after 1 July 2006, with various exemptions, including an exemption for
lead solder in network infrastructure equipment. Nokia products shipped to the EU
after 1 July 2006 comply with the EU RoHS Directive.
Nokia has implemented a material/substance content management process. The
process is described in: Nokia process for ensuring RoHS Compliance
(1AA002660031ASZZA). This ensures compliance with the European Union
Directive 2011/65/EU on the Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment (RoHS2). With the process equipment is
assessed in accordance with the Harmonised Standard EN50581:2012 (CENELEC)
on Technical documentation for the assessment of electrical and electronic products
with respect to the restriction of hazardous substances.
2.3.7
End-of-life collection and treatment
Electronic products bearing or referencing the symbol shown in Figure 3, when put
on the market within the European Union (EU), shall be collected and treated at the
end of their useful life, in compliance with applicable EU and local legislation. They
shall not be disposed of as part of unsorted municipal waste. Due to materials that
may be contained in the product, such as heavy metals or batteries, the environment
and human health may be negatively impacted as a result of inappropriate disposal.
Note — In the European Union, a solid bar under the symbol for
a crossed-out wheeled bin indicates that the product was put on
the market after 13 August 2005.
Figure 3
Issue: 01P03
Recycling/take back/disposal of product symbol
3TG-00088-AAAA-TCZZA
13
ETSI environmental and CRoHS guidelines
Nokia FastMile Outdoor Unit User Manual
At the end of its life, Nokia FastMile Outdoor Unit equipment is subject to the
applicable local legislations that implement the European Directive 2012/19EU on
waste electrical and electronic equipment (WEEE).
There can be different requirements for collection and treatment in different member
states of the European Union.
In compliance with legal requirements and contractual agreements, where
applicable, Nokia will offer to provide for the collection and treatment of Nokia
products bearing the logo shown in Figure 3 at the end of their useful life, or products
displaced by Nokia equipment offers. For information regarding take-back of
equipment by Nokia, or for more information regarding the requirements for
recycling/disposal of product, contact your Nokia account manager or Nokia take
back support at sustainability.global@nokia.com.
2.4 Additional information
See Chapter 10 for RF exposure information.
14
3TG-00088-AAAA-TCZZA
Issue: 01P03
Nokia FastMile Outdoor Unit User Manual
ETSI safety guidelines
3 ETSI safety guidelines
This chapter provides information about the mandatory regulations that govern the
installation and operation of Nokia FastMile Outdoor Unit equipment in the ETSI
market.
3.1 Safety instructions
This section describes the safety instructions that are provided in the customer
documentation and on the Nokia FastMile Outdoor Unit equipment.
3.1.1
Safety instruction boxes
The safety instruction boxes are provided in the Nokia FastMile Outdoor Unit
customer documentation. Observe the instructions to meet safety requirements.
The following is an example of the Danger box.
Danger — Possibility of personal injury.
The Danger box indicates that the described activity or situation may pose a threat
to personal safety. It calls attention to a situation or procedure which, if not correctly
performed or adhered to, may result in death or serious physical harm.
Do not proceed beyond a Danger box until the indicated conditions are fully
understood and met.
The following is an example of the Warning box.
Warning 1 — Possibility of equipment damage.
Warning 2 — Possibility of data loss.
The Warning box indicates that the described activity or situation may, or will, cause
equipment damage, loss of data, or serious performance problems. It identifies a
possible equipment-damaging situation or provides essential information to avoid the
degradation of system operations or data.
Do not proceed beyond a warning until the indicated conditions are fully understood
and met.
Issue: 01P03
3TG-00088-AAAA-TCZZA
15
ETSI safety guidelines
Nokia FastMile Outdoor Unit User Manual
The following is an example of the Caution box.
Caution 1 — Possibility of service interruption.
Caution 2 — Service interruption.
The Caution box indicates that the described activity or situation may, or will, cause
service interruption.
Do not proceed beyond a caution until the indicated conditions are fully understood
and met.
The following is an example of the Note box.
Note — Information of special interest.
The Note box provides information that assists the personnel working with Nokia
FastMile Outdoor Unit equipment. It does not provide safety-related instructions.
3.1.2
Safety-related labels
The Nokia FastMile Outdoor Unit equipment is labeled with the specific safety
instructions and compliance information that is related to a product, or product
variant, of the equipment. Observe the instructions on the safety labels.
Table 2 provides sample safety labels on Nokia FastMile Outdoor Unit equipment.
Table 2
Safety labels
Description
Label text
ESD warning
Caution: This assembly contains an electrostatic sensitive device.
3.2 Safety standards compliance
This section describes Nokia FastMile Outdoor Unit equipment compliance with the
European safety standards.
16
3TG-00088-AAAA-TCZZA
Issue: 01P03
Nokia FastMile Outdoor Unit User Manual
3.2.1
ETSI safety guidelines
EMC compliance
The Nokia FastMile Outdoor Unit equipment complies with the following EMC
requirements:
• Electromagnetic compatibility of multimedia equipment - Emission requirements
CISPR 32, EN 55032
• Electromagnetic compatibility of multimedia equipment - Immunity requirements
CISPR 35, EN55035
• Electromagnetic Compatibility (EMC) standard for radio equipment and services;
Part 1: Common technical requirements; Harmonized Standard covering the
essential requirements of article 3.1(b) of Directive 2014/53/EU and the essential
requirements of article 6 of Directive 2014/30/EU EN 301489-1
• Electromagnetic Compatibility (EMC) standard for radio equipment and services;
Part 17: Specific conditions for Broadband Data Transmission Systems;
Harmonized Standard covering the essential requirements of article 3.1(b) of
Directive 2014/53/EU EN 301489-17
3.2.2
Equipment safety standard compliance
The Nokia FastMile Outdoor Unit equipment complies with the requirements of the
following:
• EN 60950-1, Safety of Information Technology Equipment for use in a restricted
location (per R-269)
• IEC 60950-22, EN 60950-22: Information Technology Equipment- Safety - Part 22
Equipment to be installed Outdoors
3.2.3
Environmental standard compliance
The Nokia FastMile Outdoor Unit equipment complies with the EN 300 019 European
environmental standards.
3.2.4
Laser product standard compliance
The Nokia FastMile Outdoor Unit equipment is not a laser product.
Issue: 01P03
3TG-00088-AAAA-TCZZA
17
ETSI safety guidelines
Nokia FastMile Outdoor Unit User Manual
3.3 Electrical safety guidelines
This section provides the electrical safety guidelines for the Nokia FastMile Outdoor
Unit equipment.
Note 1 — The Nokia FastMile Outdoor Unit equipment complies
with the U.S. National Electrical Code. However, local electrical
authorities have jurisdiction when there are differences
between the local and U.S. standards.
Note 2 — The Nokia FastMile Outdoor Unit equipment complies
with BS EN 61140.
3.3.1
Power supplies
The use of any non-Nokia approved power supplies or power adapters is not
supported or endorsed by Nokia. Such use will void any warranty or support contract
with Nokia. Such use greatly increases the danger of damage to equipment or
property.
3.3.2
Cabling
The following are the guidelines regarding cables used for the Nokia FastMile
Outdoor Unit equipment:
• All cables must be approved by the relevant national electrical code.
• Cables for outdoor connection to the Nokia FastMile Outdoor Unit equipment
must be suitable for outdoor use.
• The Nokia FastMile Outdoor Unit equipment must be used with the cabling
supplied with the equipment.
3.3.3
Protective earth
Earthing and bonding of the Nokia FastMile Outdoor Unit equipment must comply
with the requirements of local electrical codes.
18
3TG-00088-AAAA-TCZZA
Issue: 01P03
Nokia FastMile Outdoor Unit User Manual
ETSI safety guidelines
3.4 ESD safety guidelines
The Nokia FastMile Outdoor Unit equipment is sensitive to ESD if opened.
Operations personnel must observe the following ESD instructions when they handle
the Nokia FastMile Outdoor Unit equipment.
Caution — This equipment is ESD sensitive if opened. Proper
ESD protections should be used if you open the Nokia FastMile
Outdoor Unit.
Service personnel are not required to wear wrist straps when performing normal
installation or maintenance activities.
3.5 Environmental requirements
See chapter 9 in this guide for more information about temperature ranges for the
Nokia FastMile Outdoor Unit equipment and other Nokia FastMile Outdoor Unit
specifications.
During operation in the supported temperature range, condensation inside the Nokia
FastMile Outdoor Unit equipment caused by humidity is not an issue because the
Nokia FastMile Outdoor Unit is a sealed unit.
3.6 Additional information
See Chapter 10 for RF exposure information.
Issue: 01P03
3TG-00088-AAAA-TCZZA
19
Nokia FastMile Outdoor Unit User Manual
ANSI safety guidelines
4 ANSI safety guidelines
This chapter provides information about the mandatory regulations that govern the
installation and operation of the Nokia FastMile Outdoor Unit equipment in the North
American or ANSI market.
4.1 Safety instructions
This section describes the safety instructions that are provided in the customer
documentation and on the Nokia FastMile Outdoor Unit equipment.
4.1.1
Safety instruction boxes in customer
documentation
The safety instruction boxes are provided in the Nokia FastMile Outdoor Unit
customer documentation. Observe the instructions to meet safety requirements.
The following is an example of the Danger box.
Danger — Possibility of personal injury.
The Danger box indicates that the described activity or situation may pose a threat
to personal safety. It calls attention to a situation or procedure which, if not correctly
performed or adhered to, may result in death or serious physical harm.
Do not proceed beyond a Danger box until the indicated conditions are fully
understood and met.
The following is an example of the Warning box.
Warning 1 — Possibility of equipment damage.
Warning 2 — Possibility of data loss.
The Warning box indicates that the described activity or situation may, or will, cause
equipment damage, loss of data, or serious performance problems. It identifies a
possible equipment-damaging situation or provides essential information to avoid the
degradation of system operations or data.
Do not proceed beyond a warning until the indicated conditions are fully understood
and met.
Issue: 01P03
3TG-00088-AAAA-TCZZA
21
ANSI safety guidelines
Nokia FastMile Outdoor Unit User Manual
The following is an example of the Caution box.
Caution 1 — Possibility of service interruption.
Caution 2 — Service interruption.
The Caution box indicates that the described activity or situation may, or will, cause
service interruption.
Do not proceed beyond a caution until the indicated conditions are fully understood
and met.
The following is an example of the Note box.
Note — Information of special interest.
The Note box provides information that assists the personnel working with Nokia
FastMile Outdoor Unit equipment. It does not provide safety-related instructions.
4.1.2
Safety-related labels
The Nokia FastMile Outdoor Unit equipment is labeled with specific safety
compliance information and instructions that are related to a product, or product
variant, of the equipment. Observe the instructions on the safety labels.
Table 3 provides examples of the text in the various Nokia FastMile Outdoor Unit
equipment safety labels.
Table 3
22
Safety labels
Description
Label text
UL compliance
ETL/cETL
UL50E compliance
Type 3
ESD warning
Caution: This assembly contains electrostatic sensitive device.
FCC standards compliance
Tested to comply with FCC standards for home or office use.
Operation conditions
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
CE marking
There are various CE symbols for CE compliance.
3TG-00088-AAAA-TCZZA
Issue: 01P03
Nokia FastMile Outdoor Unit User Manual
ANSI safety guidelines
Figure 4 shows a sample safety label for FCC and Figure 5 shows a sample safety
label for ETL.
Figure 4
Sample safety label for FCC
Tested to Comply
with FCC Standards
FOR HOME OR OFFICE USE
®
COMMUNICATION SERVICE EQUIPMENT
US LISTED
27FY
Type 3R Enclosure - Rainproof
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil
numerique de la class B est conforme a la norme NMB-003 du Canada
CAUTION
This Assembly Contains Electrostatic Sensitive Devices
18533
Figure 5
Sample safety label for ETL
5011710
27799
4.2 Safety standards compliance
This section describes the Nokia FastMile Outdoor Unit equipment compliance with
North American safety standards.
Warning — Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void
the user's authority to operate the equipment.
Issue: 01P03
3TG-00088-AAAA-TCZZA
23
ANSI safety guidelines
4.2.1
Nokia FastMile Outdoor Unit User Manual
EMC, EMI, and ESD compliance
The Nokia FastMile Outdoor Unit equipment complies with the following EMC, EMI,
and ESD requirements:
• Federal Communications Commission PART 15-RADIO FREQUENCY DEVICES
Subpart C-INTENTIONAL RADIATORS Title 47 CFR Part 15. Part 15.247
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is needed.
• Consult the dealer or an experienced radio/TV technician for help.
4.2.2
Equipment safety standard compliance
The Nokia FastMile Outdoor Unit equipment complies with the requirements of:
• UL62368-1, Outdoor ONTs to “Communication Service Equipment” (CSE) and
Indoor ONTs to Information Technology Equipment (ITE)
• Information Technology Equipment- Safety - Part 22 Equipment to be installed
Outdoors
• UL 60950-22
24
3TG-00088-AAAA-TCZZA
Issue: 01P03
Nokia FastMile Outdoor Unit User Manual
ANSI safety guidelines
4.3 Electrical safety guidelines
This section provides the electrical safety guidelines for the Nokia FastMile Outdoor
Unit equipment.
Note — The Nokia FastMile Outdoor Unit equipment complies
with the U.S. National Electrical Code. However, local electrical
authorities have jurisdiction when there are differences
between the local and U.S. standards.
4.3.1
Power supplies
The use of any non-Nokia approved power supplies or power adapters is not
supported or endorsed by Nokia. Such use will void any warranty or support contract
with Nokia. Such use greatly increases the danger of damage to equipment or
property.
4.3.2
Cabling
The following are the guidelines regarding cables used for the Nokia FastMile
Outdoor Unit equipment:
• All cables must be approved by the relevant national electrical code.
• Cables for outdoor connection to the Nokia FastMile Outdoor Unit equipment
must be suitable for outdoor use.
• The Nokia FastMile Outdoor Unit equipment must be used with the cabling
supplied with the equipment.
4.3.3
Protective earth
Earthing and bonding of the Nokia FastMile Outdoor Unit equipment must comply
with the requirements of NEC article 250 or local electrical codes.
Issue: 01P03
3TG-00088-AAAA-TCZZA
25
ANSI safety guidelines
Nokia FastMile Outdoor Unit User Manual
4.4 ESD safety guidelines
The Nokia FastMile Outdoor Unit equipment is sensitive to ESD if opened.
Operations personnel must observe the following ESD instructions when they handle
the Nokia FastMile Outdoor Unit equipment.
Caution — This equipment is ESD sensitive if opened. Proper
ESD protections should be used if you open the Nokia FastMile
Outdoor Unit.
Service personnel are not required to wear wrist straps when performing normal
installation or maintenance activities.
4.5 Environmental requirements
See chapter 9 in this guide for more information about temperature ranges for the
Nokia FastMile Outdoor Unit equipment and other Nokia FastMile Outdoor Unit
specifications.
During operation in the supported temperature range, condensation inside the Nokia
FastMile Outdoor Unit equipment caused by humidity is not an issue because the
Nokia FastMile Outdoor Unit is a sealed unit.
4.6 Additional information
See Chapter 10 for RF exposure information.
See Chapter 11 for additional FCC compliance information.
26
3TG-00088-AAAA-TCZZA
Issue: 01P03
Nokia FastMile Outdoor Unit User Manual
Table of contents
Issue: 01P03
Preface.............................................................................................3
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
1.9.1
1.10
Scope ..........................................................................................................3
Audience......................................................................................................3
Required knowledge....................................................................................3
Acronyms and initialisms .............................................................................3
Assistance and ordering phone numbers ....................................................4
Nokia quality processes...............................................................................4
Safety information........................................................................................4
Documents ..................................................................................................4
Special information ......................................................................................5
Steps with options or substeps....................................................................6
Multiple PDF document search ...................................................................7
ETSI environmental and CRoHS guidelines.................................9
2.1
2.1.1
2.1.2
2.1.2.1
2.1.2.2
2.2
2.3
2.3.1
2.3.2
2.3.3
2.3.4
2.3.5
2.3.6
2.3.7
2.4
Environmental labels ...................................................................................9
Overview......................................................................................................9
Environmental related labels .......................................................................9
Products below Maximum Concentration Value (MCV) label......................9
Products containing hazardous substances above Maximum
Concentration Value (MCV) label ..............................................................10
Hazardous Substances Table (HST).........................................................11
Other environmental requirements ............................................................12
Environmental requirements......................................................................12
Storage ......................................................................................................12
Transportation ...........................................................................................12
Stationary use............................................................................................12
Thermal limitations ....................................................................................12
Material content compliance......................................................................13
End-of-life collection and treatment ...........................................................13
Additional information ................................................................................14
ETSI safety guidelines..................................................................15
3.1
3.1.1
3.1.2
3.2
3.2.1
3.2.2
3.2.3
3.2.4
3.3
3.3.1
3.3.2
3.3.3
3.4
3.5
Safety instructions .....................................................................................15
Safety instruction boxes ............................................................................15
Safety-related labels..................................................................................16
Safety standards compliance ....................................................................16
EMC compliance .......................................................................................17
Equipment safety standard compliance.....................................................17
Environmental standard compliance .........................................................17
Laser product standard compliance ..........................................................17
Electrical safety guidelines ........................................................................18
Power supplies ..........................................................................................18
Cabling ......................................................................................................18
Protective earth .........................................................................................18
ESD safety guidelines ...............................................................................19
Environmental requirements......................................................................19
3TG-00088-AAAA-TCZZA
27
Nokia FastMile Outdoor Unit User Manual
28
3.6
Additional information ................................................................................19
ANSI safety guidelines .................................................................21
4.1
4.1.1
4.1.2
4.2
4.2.1
4.2.2
4.3
4.3.1
4.3.2
4.3.3
4.4
4.5
4.6
Safety instructions .....................................................................................21
Safety instruction boxes in customer documentation ................................21
Safety-related labels..................................................................................22
Safety standards compliance ....................................................................23
EMC, EMI, and ESD compliance...............................................................24
Equipment safety standard compliance.....................................................24
Electrical safety guidelines ........................................................................25
Power supplies ..........................................................................................25
Cabling ......................................................................................................25
Protective earth .........................................................................................25
ESD safety guidelines ...............................................................................26
Environmental requirements......................................................................26
Additional information ................................................................................26
Overview ........................................................................................35
5.1
5.2
5.2.1
5.2.2
5.2.3
5.3
5.3.1
5.4
5.5
5.6
5.7
5.7.1
5.7.2
5.8
Product overview .......................................................................................35
Functional overview...................................................................................37
LTE characteristics ....................................................................................38
Ethernet characteristics .............................................................................38
Power supply characteristics .....................................................................38
Variant overview ........................................................................................38
Variant label information............................................................................39
Physical interfaces ....................................................................................39
LED behavior ............................................................................................40
Power information......................................................................................41
Performance information ...........................................................................41
Throughput information .............................................................................41
Power consumption information ................................................................42
Standards certification ...............................................................................42
Installation procedure ..................................................................45
6.1
6.2
6.3
6.3.1
6.4
6.5
Safety information......................................................................................45
Package contents ......................................................................................46
Installation prerequisites ...........................................................................47
Lightning protection ...................................................................................48
Installation steps for the Nokia FastMile Outdoor Unit ..............................48
Post-installation of the Nokia FastMile Outdoor Unit .................................73
Troubleshooting ...........................................................................85
7.1
7.1.1
7.1.2
7.2
7.2.1
7.2.2
Potential problems during installation and startup phase ..........................85
Nokia FastMile Outdoor Unit cannot attach to LTE network due to
hardware mismatch ...................................................................................85
Failed to get Base Station Location...........................................................85
Potential problems during execution phase...............................................85
Nokia FastMile Outdoor Unit firmware upgrade to latest build failed.........86
Trace request ............................................................................................86
Appendix A: Factory settings ......................................................87
8.1
Factory settings .........................................................................................87
3TG-00088-AAAA-TCZZA
Issue: 01P03
Nokia FastMile Outdoor Unit User Manual
Issue: 01P03
Appendix B: Specifications .........................................................89
9.1
Specifications ............................................................................................89
10
Appendix C: RF exposure ............................................................91
10.1
RF exposure ..............................................................................................91
11
Appendix D: FCC statements and label instructions ................93
11.1
11.2
11.3
FCC compliance statement .......................................................................93
FCC radiation exposure statement............................................................93
FCC label instructions ...............................................................................93
12
Glossary ........................................................................................95
3TG-00088-AAAA-TCZZA
29
Nokia FastMile Outdoor Unit User Manual
List of figures
ETSI environmental and CRoHS guidelines.................................9
Figure 1
Figure 2
Figure 3
Products below MCV value label...............................................................10
Products above MCV value label ..............................................................11
Recycling/take back/disposal of product symbol .......................................13
ANSI safety guidelines .................................................................21
Figure 4
Figure 5
Sample safety label for FCC......................................................................23
Sample safety label for ETL ......................................................................23
Overview ........................................................................................35
Figure 6
Figure 7
Figure 8
Application example of the Nokia FastMile Outdoor Unit ..........................36
Versions of the Nokia FastMile Outdoor Unit ............................................37
Location of physical interfaces on the Nokia FastMile Outdoor Unit .........40
Installation procedure ..................................................................45
Figure 9
Figure 10
Figure 11
Figure 12
Figure 13
Figure 14
Splash screen............................................................................................49
Screen for preparing to scan the QR code ................................................50
QR code screen.........................................................................................50
Screen showing the Fresh Install option....................................................51
Screen for logging in to the Nokia Altiplano FastMile Controller ...............52
Screen indicating to use the Nokia Field Assistant app to start
finding a nearby base station.....................................................................53
Screen showing to hold vertically for first person view ..............................53
Screen showing to check for obstructions that will block signal from
a base station ............................................................................................54
Screen with prompt to allow access to the device’s location.....................55
Screen showing good location with respect to the base station ................56
Location of physical interfaces on the Nokia FastMile Outdoor Unit .........57
Attaching the mounting plate to the Nokia FastMile Outdoor Unit.............58
Mounting the wall-mount bracket...............................................................59
Mounting the Nokia FastMile Outdoor Unit................................................60
Location of ports on a PoE injector............................................................61
Screen showing the connect prompt .........................................................62
Screen showing the Bluetooth pairing request ..........................................63
Screen for enabling the VPN profile .........................................................64
Screen showing the login prompt ..............................................................65
Screen showing that 0% of the reboot process is complete......................66
Screen showing that 100% of the reboot process is complete..................66
Screen showing connecting state..............................................................67
Screen showing offline state......................................................................68
Screen showing online state......................................................................68
System state screen ..................................................................................70
Screen that has the “Upload CA certificates” option..................................71
Screen that lists the CA certificates...........................................................72
Screen indicating that uploading of the CA certificates was
successful..................................................................................................72
Splash screen............................................................................................73
Figure 15
Figure 16
Figure 17
Figure 18
Figure 19
Figure 20
Figure 21
Figure 22
Figure 23
Figure 24
Figure 25
Figure 26
Figure 27
Figure 28
Figure 29
Figure 30
Figure 31
Figure 32
Figure 33
Figure 34
Figure 35
Figure 36
Figure 37
Issue: 01P03
3TG-00088-AAAA-TCZZA
31
Nokia FastMile Outdoor Unit User Manual
Figure 38
Figure 39
Figure 40
Figure 41
Figure 42
Figure 43
Figure 44
Figure 45
Figure 46
Figure 47
Figure 48
32
Screen for preparing to scan the QR code ................................................74
QR code screen.........................................................................................75
Screen showing the Connect to Receiver option.......................................76
Screen showing the connect prompt .........................................................77
Screen showing the Bluetooth pairing request ..........................................78
Screen for enabling the VPN profile .........................................................79
Screen showing the login prompt ..............................................................80
System state screen ..................................................................................81
Screen that has the “Upload CA certificates” option..................................82
Screen that lists the CA certificates...........................................................83
Screen indicating that uploading of the CA certificates was
successful..................................................................................................83
3TG-00088-AAAA-TCZZA
Issue: 01P03
Nokia FastMile Outdoor Unit User Manual
List of tables
Issue: 01P03
Preface.............................................................................................3
Table 1
Main content of manual ...............................................................................3
ETSI safety guidelines..................................................................15
Table 2
Safety labels ..............................................................................................16
ANSI safety guidelines .................................................................21
Table 3
Safety labels ..............................................................................................22
Overview ........................................................................................35
Table 4
Table 5
Table 6
Table 7
Table 8
Table 9
Table 10
Variants of the Nokia FastMile Outdoor Unit .............................................39
Label information for Nokia FastMile Outdoor Unit variants ......................39
Physical interfaces of the Nokia FastMile Outdoor Unit ............................40
LED behavior description ..........................................................................40
LTE throughput information .......................................................................41
Power consumption information ................................................................42
Standards certifications for the Nokia FastMile Outdoor Unit....................42
Installation procedure ..................................................................45
Table 11
LED behavior description ..........................................................................62
Appendix B: Specifications .........................................................89
Table 12
Specifications for the Nokia FastMile Outdoor Unit ...................................89
3TG-00088-AAAA-TCZZA
33
Nokia FastMile Outdoor Unit User Manual
Overview
5 Overview
5.1 Product overview
5.2 Functional overview
5.3 Variant overview
5.4 Physical interfaces
5.5 LED behavior
5.6 Power information
5.7 Performance information
5.8 Standards certification
5.1 Product overview
The Nokia FastMile Outdoor Unit is the outdoor unit (ODU) of the Nokia FastMile
solution, the purpose of which is to use 3GPP based LTE radio technology to provide
broadband connectivity with guaranteed high bitrates in larger service areas in a
more cost-efficient manner than is possible with other existing solutions.
The Nokia FastMile solution can overcome network performance challenges faced
by today's mobile networks by optimizing all of the following:
• intra site interference due to neighbor sectors in same LTE base station
• inter site interference due to neighbor base stations
• link performance due to wall penetration loss and several miles path loss
The Nokia FastMile Outdoor Unit provides high-performing, wireless broadband
access over LTE to meet residential users’ total home connectivity needs for urban,
suburban, rural, and deep rural spots.
The Nokia FastMile Outdoor Unit supports LTE connectivity to an LTE base station
in the network and provides 1 Gbps Ethernet connectivity through a pre-attached 3
m (9.8 ft) Ethernet cable to an indoor unit, such as a residential gateway like the
Nokia 7368 ISAM CPE A-020W-A.
Figure 6 shows an application example of the Nokia FastMile Outdoor Unit.
Issue: 01P03
3TG-00088-AAAA-TCZZA
35
Overview
Nokia FastMile Outdoor Unit User Manual
Figure 6
Application example of the Nokia FastMile Outdoor Unit
WiFi or Ethernet
connectivity to
end-user devices
Radio
basestation
LTE
ODU
PoE
Injector
1 Gbps
Ethernet
IDU
Wi-Fi or
Ethernet
27903
The Nokia FastMile Outdoor Unit is available in two versions:
•
•
Compact with fixed beamforming antennas
ABA version with high gain beam steering antenna with automated beam
alignment
Figure 7 shows the two versions of the Nokia FastMile Outdoor Unit.
36
3TG-00088-AAAA-TCZZA
Issue: 01P03
Nokia FastMile Outdoor Unit User Manual
Figure 7
Overview
Versions of the Nokia FastMile Outdoor Unit
Compact version
ABA version
27897
The Nokia FastMile Outdoor Unit has built-in antenna and an LTE modem that
provide the LTE broadband access to the network.
The Nokia FastMile Outdoor Unit is capable of withstanding outdoor environmental
conditions. It has an IP rating of IP66 TYPE3 and can operate in a temperature of
–30°C to 65°C (–22°F to 149°F). See chapter 9 for additional specifications of the
Nokia FastMile Outdoor Unit.
5.2 Functional overview
The Nokia FastMile Outdoor Unit provides wireless broadband access in the form of
LTE to meet the ever growing network needs of end users.
The Nokia FastMile Outdoor Unit lets operators use LTE to offer fixed wireless
broadband to their customers. The Nokia FastMile Outdoor Unit is easy to install and
user-friendly to operate. It uses a mobile phone installation application known as the
Nokia Field Assistant to make sure that it is deployed in the optimal location.
The Nokia FastMile Outdoor Unit supports remote management capability, allowing
management and health monitoring of it from the Nokia Altiplano FastMile Controller.
Issue: 01P03
3TG-00088-AAAA-TCZZA
37
Overview
Nokia FastMile Outdoor Unit User Manual
5.2.1
LTE characteristics
The following are some of the key LTE characteristics of the Nokia FastMile Outdoor
Unit:
• LTE 3GPP Release 12 Compliant, UE Category 12
• transmit power: max +16 dBm +/- 2 dBm
• has variants that support the following E-UTRA bands:
• Band 43/48
5.2.2
Ethernet characteristics
The following are some of the key Ethernet characteristics of the Nokia FastMile
Outdoor Unit:
•
•
•
•
5.2.3
provides a 1 Gbps Ethernet LAN Interface
supports IEEE802.3 1000BASE-T
supports IEEE802.3az energy efficient Ethernet
has a pre-attached 3 m (9.8 ft) Cat5e shielded twisted pair Ethernet cable with an
RJ 45 connector at the free end; the same cable is also used for power over
Ethernet (PoE) as per IEEE802.3 at type-2 and for grounding to an indoor ground
Power supply characteristics
The following are some of the key power supply characteristics of the Nokia FastMile
Outdoor Unit:
• powered through PoE from an indoor unit, such as a residential gateway, or
through a PoE injector; the same cable also provides grounding to an indoor
ground
• supports PoE+ as per IEEE802.3 at type-2
• rating: 53 VDC at 600 mA
See section 5.6 for power information.
5.3 Variant overview
Variants are available for the Nokia FastMile Outdoor Unit to support different
E-UTRA bands for LTE.
38
3TG-00088-AAAA-TCZZA
Issue: 01P03
Nokia FastMile Outdoor Unit User Manual
Overview
Table 4 describes the E-UTRA band and frequency support and the antenna
configurations for each variant of the Nokia FastMile Outdoor Unit, and provides the
orderable part number.
Table 4
Version and
variant
Compact
B48
Variants of the Nokia FastMile Outdoor Unit
E-UTRA band support and frequencies
•
Band 48: TDD, 3650 MHz – 3700 MHz
5.3.1
Antenna configuration
Part number
Integrated with 14 dBi
3FE 75113 AAAA
Variant label information
Table 5 describes the label information for the variants of the Nokia FastMile Outdoor
Unit.
Table 5
Label information for Nokia FastMile Outdoor Unit variants
Version and variant
Product details
Model
Compact B48
Nokia FM compact
3FE75113AAAA
5.4 Physical interfaces
Table 6 describes the physical interfaces of the Nokia FastMile Outdoor Unit.
Issue: 01P03
3TG-00088-AAAA-TCZZA
39
Overview
Nokia FastMile Outdoor Unit User Manual
Table 6
Physical interfaces of the Nokia FastMile Outdoor Unit
Interface
Description
Ground point
External ground point in case a ground separate from indoor grounding provided by the
Ethernet cable is required
Ethernet cable
Pre-attached 3 m (9.8 ft) Ethernet cable; the same cable is also used for power (PoE
as per IEEE802.3 at type-2) and for grounding to an indoor ground.
The RJ 45 connector at the free end of the cable supports connection of an additional
length of cat5e shielded Ethernet cabling up to a maximum of 40 m (131 ft) in combined
length.
Reset button
Button to reset the Nokia FastMile Outdoor Unit
LED
Single multifunction LED that indicates status information for the Nokia FastMile
Outdoor Unit
See section 5.5 for information about LED behavior
SIM slot
Slot for Nano/4FF SIM card for the Nokia FastMile Outdoor Unit
Figure 8 shows the location of the physical interfaces on the Nokia FastMile Outdoor
Unit. Note that the cover for the SIM slot has been removed to show the slot.
Figure 8
Location of physical interfaces on the Nokia FastMile Outdoor Unit
SIM slot
LED
Ground point
Reset
button
Ethernet Cable
27898
5.5 LED behavior
Table 7 describes the behavior of the Nokia FastMile Outdoor Unit LED.
Table 7
LED behavior description
LED color
LED behavior
LED behavior description
Green
Blinking once per second
OAM link broken
Blinking twice per second
Kernel or application start up
Solid
Power on
(1 of 2)
40
3TG-00088-AAAA-TCZZA
Issue: 01P03
Nokia FastMile Outdoor Unit User Manual
Overview
LED color
LED behavior
LED behavior description
Red
Blinking once per second
Major or critical alarm
Solid
Minor alarm
Solid
Bluetooth connection established
Blue
(2 of 2)
5.6 Power information
The Nokia FastMile Outdoor Unit receives power though a CAT5e shielded Ethernet
cable connected to an indoor unit, such as a residential gateway like the Nokia 7368
ISAM CPE A-020W-A, or a PoE injector.
See section 5.7.2 for power consumption information.
5.7 Performance information
This section provides throughput and power consumption information for the Nokia
FastMile Outdoor Unit:
• section 5.7.1 provides throughput consumption information
• section 5.7.2 provides power consumption information
5.7.1
Throughput information
<< need LTE throughput data for the table and some Ethernet
throughput info >>
Table 8 provides LTE throughput information for the Nokia FastMile Outdoor Unit.
Table 8
Mode
LTE throughput information
UDP UL
UDP DL
UDP Bi-dir
(UL/DL)
TCP UL
TCP DL
TCP Bi-dir
(UL/DL)
FDD
TDD
The results in the above table are based on the following:
• cell bandwidth 20MHz max
• TDD for Band 43/48
Issue: 01P03
3TG-00088-AAAA-TCZZA
41
Overview
Nokia FastMile Outdoor Unit User Manual
•
•
•
•
Data rates can have a margin of 2%
Packet length is 1460B for UDP
Window is 128k for TCP
Data rates are for IPv4 cases
Ethernet throughput for the Nokia FastMile Outdoor Unit is as per standard Ethernet
1000BASE-T, with a maximum of 1000 Mbps. The Ethernet link gets negotiated at
1000 Mbps when the indoor unit, such as a residential gateway like the Nokia 7368
ISAM CPE A-020W-A, or a PoE injector is connected to the Nokia FastMile Outdoor
Unit. The end-to-end throughput is achieved in the conductive mode with cable
connected.
5.7.2
Power consumption information
Table 9 provides power consumption information for the Nokia FastMile Outdoor
Unit.
Table 9
Power consumption information
Condition
Power consumption
Maximum power output
7w
Provisioned but not activated
1w
5.8 Standards certification
Table 10 provides standards certification information for the Nokia FastMile Outdoor
Unit.
Table 10
42
Standards certifications for the Nokia FastMile Outdoor Unit
Category
Certifications
RF
FCC 47 Parts 90 for Band 43, 48 of the Compact version
EMC
FCC 47 Parts 90 for Band 43, 48 of the Compact version
3TG-00088-AAAA-TCZZA
Issue: 01P03
Nokia FastMile Outdoor Unit User Manual
Overview
The FCC ID is valid for Band 43,48 of the Compact version
See chapter 11 for FCC statements and label instructions.
Issue: 01P03
3TG-00088-AAAA-TCZZA
43
Nokia FastMile Outdoor Unit User Manual
Installation procedure
6 Installation procedure
6.1 Safety information
6.2 Package contents
6.3 Installation prerequisites
6.4 Installation steps for the Nokia FastMile Outdoor Unit
6.5 Post-installation of the Nokia FastMile Outdoor Unit
6.1 Safety information
Be sure to observe the following before installing the Nokia FastMile Outdoor Unit:
• Professional installation is recommended for the Nokia FastMile Outdoor Unit. If
the end-user is going to install the Nokia FastMile Outdoor Unit, appropriate safety
instructions and appropriate information must be provided.
• Only use a Nokia-approved indoor unit or a Nokia-approved PoE Injector for
powering the Nokia FastMile Outdoor Unit.
Issue: 01P03
3TG-00088-AAAA-TCZZA
45
Installation procedure
Nokia FastMile Outdoor Unit User Manual
• Do not provide power to the Nokia FastMile Outdoor Unit before completing the
hardware installation step of the installation procedure.
• Maintain at least 50 cm (20 in) distance from the front face of the Nokia FastMile
Outdoor Unit while the system is operating.
Danger 1 — Lightning danger: Since cables from external
environment may connect to the system and they are exposed
to lightning, do not work on equipment or cables during periods
of lightning activity.
Danger 2 — Height danger: Falling from high elevations can
cause serious injury or death. Caution should be observed
whenever performing aerial installations.
Danger 3 — Power danger:
• Hazardous electrical voltages and currents can cause
serious physical harm or death. Always use insulated tools
and follow proper safety precautions when connecting or
disconnecting power circuits.
• Make sure all sources of power are turned off and have no
live voltages present on feed lines or terminals. Use a
voltmeter to measure for voltage before proceeding.
• Always contact the local utility company before connecting
the equipment to power.
6.2 Package contents
The shipping package for the Nokia FastMile Outdoor Unit contains the following:
• Nokia FastMile Outdoor Unit (quantity one) with pre-attached 3 m (9.8 ft) Ethernet
cable
• wall mount-bracket and mounting plate (quantity one of each), attached to each
other with three fasteners when shipped
• two screws for attaching the mounting plate to the Nokia FastMile Outdoor Unit
The outside of the shipping package of the Nokia FastMile Outdoor Unit has a QR
code that has system-use information for the Nokia FastMile Outdoor Unit.
46
3TG-00088-AAAA-TCZZA
Issue: 01P03
Nokia FastMile Outdoor Unit User Manual
Installation procedure
6.3 Installation prerequisites
Be sure to observe the following prerequisites before installing the Nokia FastMile
Outdoor Unit:
• Installation personnel must have knowledge about installing the unit
• A valid Nano/4FF SIM card is needed for the Nokia FastMile Outdoor Unit to
•
•
•
•
•
communicate with the LTE network
If required, a Cat5e shielded Ethernet cable that can be connected to the Ethernet
cable of the Nokia FastMile Outdoor Unit to make it longer, up to a maximum of
40 m (131 ft) in combined length
A ground cable is needed if the Nokia FastMile Outdoor Unit will be grounded
separately from the indoor ground provided by the Ethernet cable; requires a hex
key suitable for hex socket knurled head cup screw assemblies, ISO 4762-M5X8
Appropriate fasteners for securing the Nokia FastMile Outdoor Unit to an outside
wall
Silicone or other waterproof sealing or caulking compound
Mechanical tools are required (but are not included) for mounting the Nokia
FastMile Outdoor Unit:
• Phillips screwdriver to open the SIM slot
• hex key as described above if ground cable is needed
• The Nokia Field Assistant app must be installed on an Android mobile phone
through Google Play and the mobile phone must have a camera and hardware
compass and Android OS 6.0 (Marshmallow) or above
• The following certificates need to be stored in the download folder of the mobile
phone:
• The LTE base station that will be used by the Nokia FastMile Outdoor Unit must
be available and functioning
• The indoor unit, such as a residential gateway like the Nokia 7368 ISAM CPE
A-020W-A, that will be connecting to the Nokia FastMile Outdoor Unit must be
available and reachable; if the indoor unit cannot supply PoE power to the Nokia
FastMile Outdoor Unit, then a Nokia-approved PoE injector must be used in
conjunction with the indoor unit
Issue: 01P03
3TG-00088-AAAA-TCZZA
47
Installation procedure
6.3.1
Nokia FastMile Outdoor Unit User Manual
Lightning protection
Be sure to observe the following lightning protection information:
Danger — If you are installing the Nokia FastMile Outdoor Unit
above roof level, check that lightning rods are above the
planned installation location.
PoE+ capable surge protectors should be used if the outside
cabling is longer than 10 meters (32 feet). If the outside cable
length is less than 10 meters (32 feet), no protection is required.
Only use a properly earthed wall socket for powering the indoor
unit or PoE+ injector.
6.4 Installation steps for the Nokia FastMile
Outdoor Unit
The Nokia FastMile Outdoor Unit can be installed by using the Nokia Field Assistant
app in conjunction with the following steps.
The Nokia Field Assistant app must be installed on a mobile phone as indicated in
section 6.3 before you start the Nokia FastMile Outdoor Unit installation procedure.
The following need to be considered before the start of Nokia FastMile Outdoor Unit
installation procedure:
• Follow the installation steps with exact order described in Procedure 6
• During the installation procedure and especially during base station location, you
need to avoid sending the Nokia Field Assistant app to background or press back
and forth options, otherwise the procedure will fail and you won't be able to
register again the Subscription ID since it will be considered already registered.
• During installation the procedure you need to ensure that the connection between
the Nokia Field Assistant app and the Nokia Altiplano FastMile Controller (WiFi or
LTE) and the connection between the Nokia Field Assistant app and the Nokia
FastMile Outdoor Unit (Bluetooth and VPN) will not be lost otherwise installation
will fail.
• You need to finish the Nokia FastMile Outdoor Unit installation procedure within
<< number needed >> minutes from the time the Nokia Field Assistant app is
connected to the Nokia Altiplano FastMile Controller, otherwise the installation
procedure will fail.
48
3TG-00088-AAAA-TCZZA
Issue: 01P03
Nokia FastMile Outdoor Unit User Manual
Procedure 6
Installation procedure
To install the Nokia FastMile Outdoor Unit
Connect the mobile phone to the Internet and open the Nokia Field Assistant app on the
phone.
A splash screen appears on screen for a few seconds.
Figure 9 shows the splash screen.
Figure 9
Splash screen
While the splash screen is showing, you can:
•
•
learn about the Nokia Field Assistant app by tapping on the “More” option
get information about the open source software included in Nokia Field Assistant by
tapping on the “Open source licenses” option
After the splash screen has cleared, the Nokia Field Assistant app prompts you to scan the
QR code of the Nokia FastMile Outdoor Unit so that the app can access the MAC address,
serial number, and device type of the Nokia FastMile Outdoor Unit.
Tap on “Scan” to start the scan of the QR code.
Figure 10 shows the screen for preparing to scan the QR code.
Issue: 01P03
3TG-00088-AAAA-TCZZA
49
Installation procedure
Nokia FastMile Outdoor Unit User Manual
Figure 10
Screen for preparing to scan the QR code
Use the viewfinder of the phone to align with the QR code on the shipping package of the
Nokia FastMile Outdoor Unit.
Figure 11 shows the QR code screen.
Figure 11
50
QR code screen
3TG-00088-AAAA-TCZZA
Issue: 01P03
Nokia FastMile Outdoor Unit User Manual
Installation procedure
After successful scan of the QR code, the Nokia Field Assistant app redirects you to the
home screen so that you can start a fresh install for the Nokia FastMile Outdoor Unit.
Tap on the “Fresh Install” option from the main menu of the Nokia Field Assistant app.
Figure 12 shows the Fresh Install option.
Figure 12
Screen showing the Fresh Install option
After you select the Fresh Install option, the Nokia Field Assistant app needs you to log in to
the Nokia Altiplano FastMile Controller.
A login screen prompts you to input the user name, password, FastMile Controller URL, and
the Subscription ID.
Figure 13 shows the prompt to log in to the Nokia Altiplano FastMile Controller.
Issue: 01P03
3TG-00088-AAAA-TCZZA
51
Installation procedure
Nokia FastMile Outdoor Unit User Manual
Figure 13
Screen for logging in to the Nokia Altiplano FastMile Controller
When the button is enabled (that is, it turns to blue), tap on “Login” to log in to the Nokia
Altiplano FastMile Controller
The Nokia Field Assistant app provides instructions on to find a base station.
Figure 14 shows the screen that indicates to use Nokia Field Assistant app to start finding a
nearby base station.
52
3TG-00088-AAAA-TCZZA
Issue: 01P03
Nokia FastMile Outdoor Unit User Manual
Figure 14
Installation procedure
Screen indicating to use the Nokia Field Assistant app to start
finding a nearby base station
Figure 15 shows to screen to hold vertically for first person view.
Figure 15
Issue: 01P03
Screen showing to hold vertically for first person view
3TG-00088-AAAA-TCZZA
53
Installation procedure
Nokia FastMile Outdoor Unit User Manual
Figure 16 shows the screen indicating to check for obstructions that will block the signal from
a base station.
Figure 16
Screen showing to check for obstructions that will block signal
from a base station
The Nokia Field Assistant app sends the Subscription ID, Serial Number, Device Type,
Geocoordinates of Mobile phone to the Nokia Altiplano FastMile Controller using token
authorization.
The Nokia Field Assistant app retrieves the Cell ID and Geocoordinates of provided Cell ID
from the Nokia Altiplano FastMile Controller.
The Nokia Field Assistant app prompts you to allow access to location of the Nokia FastMile
Outdoor Unit.
Figure 17 shows the prompt to allow access to the device’s location.
54
3TG-00088-AAAA-TCZZA
Issue: 01P03
Nokia FastMile Outdoor Unit User Manual
Figure 17
Installation procedure
Screen with prompt to allow access to the device’s location
Tap on “Allow” to allow access to the location of the Nokia FastMile Outdoor Unit.
The Nokia Field Assistant app uses augmented reality and the mobile phone's camera to
help you identify the direction that the Nokia FastMile Outdoor Unit should be facing, based
on base station location information stored by the server.
Note — Do not send the Nokia Field Assistant app to Background or
press back and forth otherwise the installation will fail and you won't be
able to repeat procedure for same Subscriber ID.
When the optimal direction is detected, tap on the “Done” option.
The Nokia Field Assistant app updates information on the screen dynamically to indicate the
status of the process.
Issue: 01P03
3TG-00088-AAAA-TCZZA
55
Installation procedure
Nokia FastMile Outdoor Unit User Manual
The Nokia Field Assistant app can do the following:
•
•
•
•
•
•
inform you about the location status, the fetching of the base station location, and so on
if the base station is not visible, the app prompts you with an arrow to move left or right
if the base station is visible in the screen you need to center it in a circle that the app
provides
if the base station is centered, the app enables the “Done” option so that you can proceed
with the installation
if the direction of the phone is inaccurate, the app informs you
if fetching of the base station location from the server went wrong, the app informs you
user
Figure 18 shows the screen with a circle on the base station. The green color in the circle
means that this is a good place to mount the Nokia FastMile Outdoor Unit with respect to the
location of the base station.
Figure 18
Screen showing good location with respect to the base station
Tap on “Done”.
56
Use a pencil or similar device to mark the location where the Nokia FastMile Outdoor Unit is
to be mounted and be sure to note the direction that the Nokia FastMile Outdoor Unit will
need to face with respect to the base station.
3TG-00088-AAAA-TCZZA
Issue: 01P03
Nokia FastMile Outdoor Unit User Manual
Installation procedure
Confirm that the location is suitable for considerations within the home, and that the Ethernet
cable (with or without an additional Cat5e shielded Ethernet cable attached) can be safely
and securely run though the wall and inside the home from the Nokia FastMile Outdoor Unit
to the indoor unit or PoE injector or to the prospective indoor unit or PoE injector location.
The indoor unit can be a residential gateway such the Nokia 7368 ISAM CPE A-020W-A; the
PoE injector must a Nokia-approved PoE injector.
10
Mount the Nokia FastMile Outdoor Unit and make connections as described below.
As part of this step you will be working with most of the interfaces shown in Figure 19.
Figure 19
Location of physical interfaces on the Nokia FastMile Outdoor Unit
SIM slot
LED
Ground point
Reset
button
Ethernet Cable
27898
Unpack the following from the shipping package:
•
•
•
Issue: 01P03
Nokia FastMile Outdoor Unit
wall-mount bracket; note that the wall mount-bracket is shipped attached to the
mounting plate with three fasteners
two screws for attaching the mounting plate to the Nokia FastMile Outdoor Unit
ii
Separate the mounting plate from the wall-mount bracket and save the three fasteners
for securing the mounting plate to the wall-mount bracket later on in this step
iii
Use the two supplied screws to attach the mounting plate to the back of the Nokia
FastMile Outdoor Unit as shown in Figure 20.
3TG-00088-AAAA-TCZZA
57
Installation procedure
Nokia FastMile Outdoor Unit User Manual
Figure 20
Attaching the mounting plate to the Nokia FastMile Outdoor Unit
Install the
screws
27899
58
iv
Use a Phillips screwdriver to remove the cover from the SIM slot of the Nokia FastMile
Outdoor Unit, insert a valid Nano/4FF SIM card in the slot, and re-attach the cover on
the SIM slot. Figure 19 shows the location of the SIM slot on the Nokia FastMile Outdoor
Unit.
As appropriate, drill a hole through the wall for the Ethernet cable from the Nokia
FastMile Outdoor Unit to be able to pass through. It is recommended that you drill the
hole for the Ethernet cable at a slight angle so that any water that might enter the hole
will run down towards the outside of the home.
vi
As appropriate, drill two anchor holes for the wall-mount bracket on the outside of the
wall. The anchor holes should be one directly above the other. You can use the
wall-mount bracket as a template for the anchor holes.
vii
Mount the wall-mount bracket on the outside of the wall using two appropriate fasteners
in the anchor holes drilled in the previous step, as shown in Figure 21. Ensure that the
wall-mount bracket is in a vertical position on the wall.
3TG-00088-AAAA-TCZZA
Issue: 01P03
Nokia FastMile Outdoor Unit User Manual
Figure 21
Installation procedure
Mounting the wall-mount bracket
27900
viii Line up the mounting plate (attached earlier on the back of the Nokia FastMile Outdoor
Unit with the wall-mount bracket and temporarily secure in place with the three saved
fasteners as shown in Figure 22. The figure shows one of the fasteners already in place.
Issue: 01P03
3TG-00088-AAAA-TCZZA
59
Installation procedure
Nokia FastMile Outdoor Unit User Manual
Figure 22
Mounting the Nokia FastMile Outdoor Unit
27901
ix
If the Nokia FastMile Outdoor Unit is to be connected to an outside ground, use a hex
key to connect the ground cable to the ground connection point of the Nokia FastMile
Outdoor Unit and ensure that the far end of the ground cable is connected to a suitable
ground point. Figure 19 shows the location of the ground point on the Nokia FastMile
Outdoor Unit.
Pass the Ethernet cable from the Nokia FastMile Outdoor Unit through the hole in the
wall and use silicone or other waterproof sealing or caulking compound to seal the hole.
xi
If required, rotate the Nokia FastMile Outdoor Unit +/-35 degrees horizontally for best
alignment with the LTE base tower. Tighten the fasteners to securely hold the Nokia
FastMile Outdoor Unit in place.
xii
If the Ethernet cable from the Nokia FastMile Outdoor Unit will not be long enough to
reach the indoor unit or PoE injector, make the cable longer by attaching an additional
Cat5e shielded Ethernet cable to it. The maximum combined length is 40 m (131 ft).
Do not run the cable to the indoor unit or PoE injector yet.
xiii Confirm that the indoor unit that is going to provide service for the Nokia FastMile
Outdoor Unit is installed and powered up, or install and power up the indoor unit. The
indoor unit indoor unit can be a residential gateway such as the Nokia 7368 ISAM CPE
A-020W-A.
60
3TG-00088-AAAA-TCZZA
Issue: 01P03
Nokia FastMile Outdoor Unit User Manual
Installation procedure
xiv If the Nokia FastMile Outdoor Unit is not going to be powered from the indoor unit, set
up a Nokia-approved PoE injector that is going to provide power over Ethernet to the
Nokia FastMile Outdoor Unit, including connecting the PoE injector to the indoor unit at
the PoE injector's “LAN” port and to power. Figure 23 shows the location of the “LAN”
port on a PoE injector. Specifics of the set up will depend on the PoE injector and indoor
unit.
Figure 23
Location of ports on a PoE injector
POWER
ACTIVE
LAN
POE
LAN port
PoE port
27902
xv
Connect the Nokia FastMile Outdoor Unit to its power source:
•
•
If the Nokia FastMile Outdoor Unit is going to be powered directly by the indoor unit,
safely and securely run the Ethernet cabling from the hole in the wall, through the
home to the indoor unit, and make the connection at the indoor unit. The Nokia
FastMile Outdoor Unit powers up when it receives power from the indoor unit.
If the Nokia FastMile Outdoor Unit is going to be powered by the PoE injector, safely
and securely run the Ethernet cable from the hole in the wall, through the home to
the PoE injector, and make the connection at the PoE injector's “POE” port. Figure
23 shows the location of the “POE” port on a PoE injector. Specifics of the set up will
depend on the PoE injector. The Nokia FastMile Outdoor Unit powers up when it
receives power from the PoE injector.
xvi Check the LED on the Nokia FastMile Outdoor Unit. The LED is located on the bottom
of the Nokia FastMile Outdoor Unit as shown in Figure 19. Table 11 describes the LED
behavior.
Issue: 01P03
3TG-00088-AAAA-TCZZA
61
Installation procedure
Nokia FastMile Outdoor Unit User Manual
Table 11
LED behavior description
LED color
LED behavior
LED behavior description
Green
Blinking once per second
OAM link broken
Blinking twice per second
Kernel or application start up
Solid
Power on
Blinking once per second
Major or critical alarm
Solid
Minor alarm
Solid
Bluetooth connection established
Red
Blue
11
The Nokia Field Assistant app prompts you to connect to the Nokia FastMile Outdoor Unit.
Tap on “Connect” to initiate a Bluetooth connection via MAC address to the Nokia FastMile
Outdoor Unit.
Figure 24 shows the screen for the connect prompt.
Figure 24
12
62
Screen showing the connect prompt
If Bluetooth is not enabled, the Nokia Field Assistant app requests that you allow the
Bluetooth pairing request.
3TG-00088-AAAA-TCZZA
Issue: 01P03
Nokia FastMile Outdoor Unit User Manual
Installation procedure
Allow the Bluetooth pairing request by tapping on “Pair”.
Note — Only one active Bluetooth connection is allowed towards the
Nokia FastMile Outdoor Unit. This means that at any one time, only one
mobile phone device can have a Bluetooth connection to the Nokia
FastMile Outdoor Unit. In case of a new Bluetooth connection attempt
from a different mobile phone, at the same time, the new connection will
not be accepted by the Nokia FastMile Outdoor Unit.
Figure 25 shows the screen for the Bluetooth pairing request.
Figure 25
13
Screen showing the Bluetooth pairing request
The Nokia Field Assistant app prompts you to enable the VPN profile.
Enable the VPN profile by tapping on “Connect”.
Note — Any preexisting VPN connection on the mobile phone will be
deactivated when you enable the VPN profile.
Figure 26 shows the screen for enabling the VPN profile.
Issue: 01P03
3TG-00088-AAAA-TCZZA
63
Installation procedure
Nokia FastMile Outdoor Unit User Manual
Figure 26
14
Screen for enabling the VPN profile
After successfully enabling the VPN profile, the Nokia Field Assistant app will log in to the
Nokia FastMile Outdoor Unit to exchange certificates and apply necessary configuration.
A login screen appears and prompts you to input credentials for the Nokia FastMile Outdoor
Unit.
When the button is enabled (that is, it turns to blue), you can tap on “Connect” to continue.
Figure 27 shows the login prompt.
64
3TG-00088-AAAA-TCZZA
Issue: 01P03
Nokia FastMile Outdoor Unit User Manual
Figure 27
15
Installation procedure
Screen showing the login prompt
After successful credential validation from the Nokia FastMile Outdoor Unit is done, the Nokia
Field Assistant app retrieves the ODU Public Key and sends it to the Nokia Altiplano FastMile
Controller along with Subscription ID. The Nokia Altiplano FastMile Controller uses the ODU
Public Key in order to encrypt the config package. The Nokia Field Assistant app retrieves
the config package including the encrypted Configuration file, the Public Key (signed by
Operator CA) and the Operator CA Certificate.
The Nokia Field Assistant app relays configuration file towards the Nokia FastMile Outdoor
Unit.
The Nokia Field Assistant app waits for the Nokia FastMile Outdoor Unit to acknowledge that
has received the configuration file.
16
After successful receipt of the configuration file from the Nokia FastMile Outdoor Unit, the
Nokia Field Assistant informs you that the Nokia FastMile Outdoor Unit will be rebooted and
prompts you to press “Done” in order to navigate back to main menu.
Figure 28 shows the screen when 0% of the reboot is complete.
Issue: 01P03
3TG-00088-AAAA-TCZZA
65
Installation procedure
Nokia FastMile Outdoor Unit User Manual
Figure 28
Screen showing that 0% of the reboot process is complete
Figure 29 shows the screen when all of the reboot process is complete.
Figure 29
Screen showing that 100% of the reboot process is complete
Tap on “Done” when the Nokia Field Assistant app indicates that the setup is complete.
66
3TG-00088-AAAA-TCZZA
Issue: 01P03
Nokia FastMile Outdoor Unit User Manual
17
Installation procedure
After the Nokia FastMile Outdoor Unit has finished rebooting, tap on “Connect to Receiver”
on the main menu of the Nokia Field Assistant app to connect to the Nokia FastMile Outdoor
Unit.
The Nokia Field Assistant app prompts you to connect again to the Nokia FastMile Outdoor
Unit via Bluetooth and afterwards to enable VPN as described in earlier steps.
18
The Nokia Field Assistant shows the status of the connection to the Nokia FastMile Outdoor
Unit.
There are three possible states:
•
•
•
connecting: the Nokia FastMile Outdoor Unit is connecting to LTE network
offline: the Nokia FastMile Outdoor Unit is not connected to LTE network
online: the Nokia FastMile Outdoor Unit is connected to the LTE network and is
communicating with the Nokia Altiplano FastMile Controller
Figure 30 shows the connecting state.
Figure 30
Screen showing connecting state
Figure 32 shows the offline state.
Issue: 01P03
3TG-00088-AAAA-TCZZA
67
Installation procedure
Nokia FastMile Outdoor Unit User Manual
Figure 31
Screen showing offline state
Figure 32 shows the online state.
Figure 32
68
Screen showing online state
3TG-00088-AAAA-TCZZA
Issue: 01P03
Nokia FastMile Outdoor Unit User Manual
19
Installation procedure
You can view the following information by selecting the Connection Status option of the main
screen:
•
General stats:
•
•
•
bytes sent: the total number of bytes sent on the interface
bytes received: the total number of bytes received on the interface
LTE cell stats:
•
•
•
•
•
•
•
•
•
cell ID: The ECI of cell
connection state: Does ODU connect to this cell
status: The current operational state of the PDN connection
EARFCN: The carrier frequency in the uplink and downlink is designated by the E-UTRA.
Absolute Radio Frequency Channel Number (EARFCN) in the range 0 - 65535.
PCI: The physical cellid of cell
RSRP: The average value of Reference Signal Received Power (dBm) in measured
interval, resolution 1dBm.
RSRQ: The average value of Reference Signal Received Quality (dB) in measured
interval, resolution 1dB.
RSSI: The average value of Received Signal Strength indicator (dBm) in measured
interval, resolution 1dBm.
SINR: The average value of Signal-to-Interference-plus-Noise Ratio (dB) in measured
interval, resolution 1dB.
Figure 33 shows an example of the System state screen.
Note — After Fresh Installation and when LTE attach is successful,
some of the values displayed will not be updated for some time (values
will be zero until the first 15minutes interval is finished).
Issue: 01P03
3TG-00088-AAAA-TCZZA
69
Installation procedure
Nokia FastMile Outdoor Unit User Manual
Figure 33
20
System state screen
Additionally, the main menu of the Nokia Field Assistant app displays an additional option
“Upload CA certificates’ where you can transfer updated certificates (stored under download
mobile phone's directory) towards the Nokia FastMile Outdoor Unit.
Tap on the “Upload CA certificates” option.
Figure 34 shows the screen that has the “Upload CA certificates” option.
70
3TG-00088-AAAA-TCZZA
Issue: 01P03
Nokia FastMile Outdoor Unit User Manual
Figure 34
ii
Installation procedure
Screen that has the “Upload CA certificates” option
Select the required Upload CA certificates and tap on “Ok”. Note that the certificates
must be in the download folder of the mobile phone before you can upload them to the
Nokia FastMile Outdoor Unit.
Figure 35 shows the screen that lists the CA certificates.
Issue: 01P03
3TG-00088-AAAA-TCZZA
71
Installation procedure
Nokia FastMile Outdoor Unit User Manual
Figure 35
iii
Figure 36 shows the screen that indicates that uploading of the CA certificates was
successful.
Figure 36
72
Screen that lists the CA certificates
Screen indicating that uploading of the CA certificates was
successful
3TG-00088-AAAA-TCZZA
Issue: 01P03
Nokia FastMile Outdoor Unit User Manual
Installation procedure
Tap on “Ok” to clear the message.
6.5 Post-installation of the Nokia FastMile
Outdoor Unit
After installation, the Nokia FastMile Outdoor Unit can be accessed by using the
Nokia Field Assistant app in conjunction with the following steps.
The Nokia FastMile Outdoor Unit must be installed as indicated in section 6.4 before
you can do this post-installation procedure.
Procedure 7
To access an installed Nokia FastMile Outdoor Unit
Connect the mobile phone to the Internet and open the Nokia Field Assistant app on the
phone.
A splash screen appears on screen for a few seconds.
Figure 9 shows the splash screen.
Figure 37
Issue: 01P03
Splash screen
3TG-00088-AAAA-TCZZA
73
Installation procedure
Nokia FastMile Outdoor Unit User Manual
While the splash screen is showing, you can:
•
•
learn about the Nokia Field Assistant app by tapping on the “More” option
get information about the open source software included in Nokia Field Assistant by
tapping on the “Open source licenses” option
After the splash screen has cleared, the Nokia Field Assistant app prompts you to scan the
QR code of the Nokia FastMile Outdoor Unit so that the app can access the MAC address,
serial number, and device type of the Nokia FastMile Outdoor Unit.
Tap on “Scan” to start the scan of the QR code.
Figure 10 shows the screen for preparing to scan the QR code.
Figure 38
Screen for preparing to scan the QR code
Use the viewfinder of the phone to align with the QR code on the shipping package of the
Nokia FastMile Outdoor Unit.
Figure 11 shows the QR code screen.
74
3TG-00088-AAAA-TCZZA
Issue: 01P03
Nokia FastMile Outdoor Unit User Manual
Figure 39
Installation procedure
QR code screen
After successful scan of the QR code, the Nokia Field Assistant app redirects you to the
home screen so that you can connect to the Nokia FastMile Outdoor Unit.
Tap on the “Connect to Receiver” option from the main menu of the Nokia Field Assistant
app.
Figure 12 shows the Connect to Receiver option.
Issue: 01P03
3TG-00088-AAAA-TCZZA
75
Installation procedure
Nokia FastMile Outdoor Unit User Manual
Figure 40
Screen showing the Connect to Receiver option
The Nokia Field Assistant app prompts you to connect to the Nokia FastMile Outdoor Unit.
Tap on “Connect” to initiate a Bluetooth connection via MAC address to the Nokia FastMile
Outdoor Unit.
Figure 24 shows the screen for the connect prompt.
76
3TG-00088-AAAA-TCZZA
Issue: 01P03
Nokia FastMile Outdoor Unit User Manual
Figure 41
Installation procedure
Screen showing the connect prompt
If Bluetooth is not enabled, the Nokia Field Assistant app requests that you allow the
Bluetooth pairing request.
Allow the Bluetooth pairing request by tapping on “Pair”.
Note — Only one active Bluetooth connection is allowed towards the
Nokia FastMile Outdoor Unit. This means that at any one time, only one
mobile phone device can have a Bluetooth connection to the Nokia
FastMile Outdoor Unit. In case of a new Bluetooth connection attempt
from a different mobile phone, at the same time, the new connection will
not be accepted by the Nokia FastMile Outdoor Unit.
Figure 25 shows the screen for the Bluetooth pairing request.
Issue: 01P03
3TG-00088-AAAA-TCZZA
77
Installation procedure
Nokia FastMile Outdoor Unit User Manual
Figure 42
Screen showing the Bluetooth pairing request
The Nokia Field Assistant app prompts you to enable the VPN profile.
Enable the VPN profile by tapping on “Connect”.
Note — Any preexisting VPN connection on the mobile phone will be
deactivated when you enable the VPN profile.
Figure 26 shows the screen for enabling the VPN profile.
78
3TG-00088-AAAA-TCZZA
Issue: 01P03
Nokia FastMile Outdoor Unit User Manual
Figure 43
Installation procedure
Screen for enabling the VPN profile
After successfully enabling the VPN profile, the Nokia Field Assistant app will log in to the
Nokia FastMile Outdoor Unit to exchange certificates and apply necessary configuration.
A login screen appears and prompts you to input credentials for the Nokia FastMile Outdoor
Unit.
When the button is enabled (that is, it turns to blue), you can tap on “Connect” to continue.
Figure 27 shows the login prompt.
Issue: 01P03
3TG-00088-AAAA-TCZZA
79
Installation procedure
Nokia FastMile Outdoor Unit User Manual
Figure 44
You can view the following information by selecting the Connection Status option of the main
screen:
•
General stats:
•
•
•
bytes sent: the total number of bytes sent on the interface
bytes received: the total number of bytes received on the interface
LTE cell stats:
•
•
•
•
•
•
•
•
•
80
Screen showing the login prompt
cell ID: The ECI of cell
connection state: Does ODU connect to this cell
status: The current operational state of the PDN connection
EARFCN: The carrier frequency in the uplink and downlink is designated by the E-UTRA.
Absolute Radio Frequency Channel Number (EARFCN) in the range 0 - 65535.
PCI: The physical cellid of cell
RSRP: The average value of Reference Signal Received Power (dBm) in measured
interval, resolution 1dBm.
RSRQ: The average value of Reference Signal Received Quality (dB) in measured
interval, resolution 1dB.
RSSI: The average value of Received Signal Strength indicator (dBm) in measured
interval, resolution 1dBm.
SINR: The average value of Signal-to-Interference-plus-Noise Ratio (dB) in measured
interval, resolution 1dB.
3TG-00088-AAAA-TCZZA
Issue: 01P03
Nokia FastMile Outdoor Unit User Manual
Installation procedure
Figure 33 shows an example of the System state screen.
Note — After Fresh Installation and when LTE attach is successful,
some of the values displayed will not be updated for some time (values
will be zero until the first 15minutes interval is finished).
Figure 45
System state screen
Additionally, the main menu of the Nokia Field Assistant app displays an additional option
“Upload CA certificates’ where you can transfer updated certificates (stored under download
mobile phone's directory) towards the Nokia FastMile Outdoor Unit.
Tap on the “Upload CA certificates” option.
Figure 34 shows the screen that has the “Upload CA certificates” option.
Issue: 01P03
3TG-00088-AAAA-TCZZA
81
Installation procedure
Nokia FastMile Outdoor Unit User Manual
Figure 46
ii
Screen that has the “Upload CA certificates” option
Select the required Upload CA certificates and tap on “Ok”. Note that the certificates
must be in the download folder of the mobile phone before you can upload them to the
Nokia FastMile Outdoor Unit.
Figure 35 shows the screen that lists the CA certificates.
82
3TG-00088-AAAA-TCZZA
Issue: 01P03
Nokia FastMile Outdoor Unit User Manual
Figure 47
iii
Screen that lists the CA certificates
Figure 36 shows the screen that indicates that uploading of the CA certificates was
successful.
Figure 48
Issue: 01P03
Installation procedure
Screen indicating that uploading of the CA certificates was
successful
3TG-00088-AAAA-TCZZA
83
Installation procedure
Nokia FastMile Outdoor Unit User Manual
Tap on “Ok” to clear the message.
84
3TG-00088-AAAA-TCZZA
Issue: 01P03
Nokia FastMile Outdoor Unit User Manual
Troubleshooting
7 Troubleshooting
7.1 Potential problems during installation and startup phase
7.2 Potential problems during execution phase
7.1 Potential problems during installation and
startup phase
The following are potential problems that can occur during the installation and startup
phase.
7.1.1
Nokia FastMile Outdoor Unit cannot attach to LTE
network due to hardware mismatch
This issue can be due to E-UTRA band support mismatch between the Nokia
FastMile Outdoor Unit and LTE network because the Nokia FastMile Outdoor Unit is
not the correct variant for the E-UTRA band of the LTE network.
Check the variants listed in section 5.3 to see if the variant you are installing supports
the E-UTRA band of the LTE network. If there is a mismatch, change the Nokia
FastMile Outdoor Unit to a variant that supports the E-UTRA band of the LTE
network. If the variant is correct, contact operator.
7.1.2
Failed to get Base Station Location
One possible cause of this error, visible on Augmented Reality View, is the input of
wrong Subscription ID at login step to the Nokia Altiplano FastMile Controller.
By pressing Retry button problem persists.
In order to overcome this issue, press Back option until you reach login step and
enter again a valid Subscription ID.
7.2 Potential problems during execution phase
The following are potential problems that can occur during the execution phase.
Issue: 01P03
3TG-00088-AAAA-TCZZA
85
Troubleshooting
7.2.1
Nokia FastMile Outdoor Unit User Manual
Nokia FastMile Outdoor Unit firmware upgrade to
latest build failed
This issue can be due to a radio signal issue in the LTE network for the Nokia
FastMile Outdoor Unit.
If another LTE network is available, select it for the Nokia FastMile Outdoor Unit.
When the connection to the Nokia Altiplano FastMile Controller is recovered, check
the radio signal condition. If no problem, then perform the firmware upgrade again.
If problem persists, contact operator.
7.2.2
Trace request
The Nokia FastMile Outdoor Unit has a trace and log function that can be used for
trouble shooting purposes and for help in performing root cause analysis.
If internet is available for the Nokia FastMile Outdoor Unit, contact Nokia to request
that the trace and log function be used for the Nokia FastMile Outdoor Unit.
The trace log can be uploaded to the Nokia Altiplano FastMile Controller or other
HTTP file servers.
86
3TG-00088-AAAA-TCZZA
Issue: 01P03
Nokia FastMile Outdoor Unit User Manual
Appendix A: Factory settings
8 Appendix A: Factory settings
8.1 Factory settings
8.1 Factory settings
<< need input - assume that will be similar to the type of info in the 17.10
FastMile Home Outdoor Modem User Manual >>
Issue: 01P03
3TG-00088-AAAA-TCZZA
87
Nokia FastMile Outdoor Unit User Manual
Appendix B: Specifications
9 Appendix B: Specifications
9.1 Specifications
9.1 Specifications
Table 12 provides some specifications for the Nokia FastMile Outdoor Unit.
Table 12
Specifications for the Nokia FastMile Outdoor Unit
Item
Description
Dimensions
Compact: 23.5 cm by 23.5 cm by 5.2 cm (9.3
in by 9.3 in by 2 in)
ABA: 31.8 cm by 31.8 cm by 5.6 cm (12.5 in
by 12.5 in by 2.2 in)
Weight
Compact: 1.3 kg (2.9 lb)
ABA: 2 kg (4.4. lb)
Issue: 01P03
Power consumption
Less than 8 w
Operating altitude
Maximum operating altitude is 3048 m (10
000 ft) above mean sea level
Non-operating altitude
Maximum non-operating altitude is 12 192 m
(40 000 ft) above mean sea level
Operating temperature
–30°C to 65°C (–22°F to 149°F)
Storage temperature
–40°C to 85°C (–85°F to 185°F)
Operating humidity
5% to 85% relative humidity, non-condensing
Storage humidity
5% to 93% relative humidity, non-condensing
IP rating
IP66 TYPE3
3TG-00088-AAAA-TCZZA
89
Nokia FastMile Outdoor Unit User Manual
Appendix C: RF exposure
10 Appendix C: RF exposure
10.1 RF exposure
10.1
RF exposure
<< this information needs to be verified >>
The international standard used for the assessment of this device provides simple
conformity assessment methods for low power electronic and electrical equipment to
an exposure limit relevant to electromagnetic fields (EMF).
Based on the compliance criteria for maximum permissible exposure as in EN
50385:2017 and CE Council Recommendation Directive 2014/53/EU
Issue: 01P03
3TG-00088-AAAA-TCZZA
91
Nokia FastMile Outdoor Unit User Manual
Appendix D: FCC statements and label instructions
FCC Statement
Any Changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment .This equipment should be installed and operated with minimum distance
25cm between the radiator& your body.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
it is not permitted to use the product on aircraft or satellites.
Issue: 01P03
3TG-00088-AAAA-TCZZA
93
Nokia FastMile Outdoor Unit User Manual
Glossary
11 Glossary
<< this will be populated when the document is closer to completion >>
This glossary provides the expansions and optional descriptions of most acronyms
and initialisms that appear in this document.
3GPP
3rd Generation Partnership Project
ABA
Automated Beam Alignment
E-UTRA
Evolved Universal Terrestrial Radio Access
LTE
Long-Term Evolution
Issue: 01P03
3TG-00088-AAAA-TCZZA
95
Customer document and product support
Customer documentation
Customer Documentation Welcome Page
Technical Support
Customer Documentation Technical Support
Documentation feedback
Customer Documentation Feedback

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : Nokia
Create Date                     : 2018:10:23 19:15:22Z
Modify Date                     : 2018:12:21 09:36:33-08:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Creator Tool                    : FrameMaker 11.0.2
Metadata Date                   : 2018:12:21 09:36:33-08:00
Format                          : application/pdf
Title                           : Nokia FastMile Outdoor Unit User Manual
Creator                         : Nokia
Producer                        : Acrobat Distiller 10.1.16 (Windows)
Document ID                     : uuid:f0e975aa-5f51-4c8f-9165-51f6ebdf8341
Instance ID                     : uuid:b517e49b-a5ae-4e26-ba04-03cada89e87d
Page Mode                       : UseOutlines
Page Count                      : 87

EXIF Metadata provided by EXIF.tools