Nokia Networks R242-V01 Rooftop Spread Spectrum Wireless Router User Manual Revised Users

Nokia Networks Inc Rooftop Spread Spectrum Wireless Router Revised Users

Contents

Revised Users

Wireless Router Subscriber GuideBottom PanelBottom Panel Connections1. Antenna Connection: This connector connects directly to an antenna or to RFcable connected to an antenna. The connector is a TNC female connector.2. Ethernet Interface: A standard 10/100 BaseT Ethernet jack.3. Power Port: Connects the Nokia RoofTop Wireless Router to the 12VDC power connector. NOTE: Use only the power device provided with the unit.4. Strain Relief: For the 12VDC power cableConnecting the Wireless Router to Your PC or LANYour wireless router is capable of providing Internet access for a single PC via adirect connection or to multiple PC’s via a local area network (LAN).Direct Connection: When connecting your wireless router to a single PC, con-nect the Ethernet port on the wireless router and the network interface on yourPC with a "crossover" Ethernet cable.LAN Connection: When connecting your wireless router to multiple PCs via ahub, router, or switch, use standard "straight-through" Ethernet cables throughoutthe entire network.NOTE: Nokia RoofTop Wireless Routers are capable of providing Internet accessfor multiple PCs, however the actual number of PCs that can receive Internetconnectivity via your wireless router will depend on the level of service you purchased from your Internet Service Provider.Technical Support Nokia provides technical support only for network operators and authorizedresellers. Technical support for subscribers to a Nokia network is provided by yourInternet Service Provider. If you experience problems with your service or haveany questions regarding the performance of your wireless router, please contactthe ISP that installed the equipment.DisclaimerNokia is the manufacturer of the wireless router and provides no warranty serviceand repair. Nokia RoofTop Wireless Routers are Provided "AS IS" with no warranty.NOKIA DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THEIMPLIED WARRANTY OF MECHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE. NOKIA SHALL NOT BE LIABLE FOR SPECIAL, INCIDENTAL, PUNITIVE OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LOSS OFANTICIPATED BENEFITS OR PROFITS, LOSS OF SAVINGS OR REVENUE, PUNITIVEDAMAGES, LOSS OF USE OF THE PRODUCT OR ANY ASSOCIATED EQUIPMENT,COST OF CAPITAL, COST OF ANY SUBSTITUTE EQUIPMENT OR FACILITIES, DOWN-TIME, THE CLAIMS OF ANY THIRD PARTIES, INCLUDING CUSTOMERS, AND INJURYTO PROPERTY, RESULTING FROM THE PURCHASE OR USE OF THE PRODUCT ORARISING FROM BREACH OF THE WARRANTY, BREACH OF CONTRACT, NEGLIGENCE,STRICT TORT, OR ANY OTHER LEGAL OR EQUITABLE THEORY, EVEN IF NOKIAKNEW OF THE LIKELIHOOD OF SUCH DAMAGES. NOKIA SHALL NOT BE LIABLEFOR DELAY IN RENDERING SERVICE UNDER THE LIMITED WARRANTY, OR LOSSOF USE DURING THE PERIOD THAT THE PRODUCT IS BEING REPAIRED.If you experience any problem or malfunction of the wireless router, please contact the ISP that installed the equipment.COPYRIGHT© 2000 Nokia Corporation. All rights reserved.Rights reserved under the copyright laws of the United States.RESTRICTED RIGHTS LEGENDUse, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.227-7013.TRADEMARKSNokia and Nokia RoofTop are registered trademarks of Nokia Corporation.Other products mentioned in this document are trademarks or registered trademarks of their respective holders. REGULATORY INFORMATIONThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation. This equipment generates, uses, and canradiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. The antennas used for this transmitter may not This equipment must be installed by a professional installer.End User Card Comp 1-REV 8/4/00 1:51 PM Page 1be co-located or operating in conjunction with any other antenna or transmitter.
Service Only by Qualified ServicePersonnel• Do not open the unit, reconfigure the software or change power supplies. • The user should not make any attempt to service the wireless router.• The unit should be serviced only by qualified service personnel.Front PanelFront Panel ViewThe front panel indicators provide a quick check of the status of the wirelessrouter and its connections. The LEDs are labeled from left-to- right as follows: 1. Ethernet LAN - shows the local area network activity.2. Radio - shows both transmit and receive radio activity.3. Anchor - shows status in network and gives RF link information. If this lightis off you do not have the connectivity to the network.4. Power Indicator - Steady light indicates the unit is powered on.Introduction Your Nokia RoofTop™ Wireless Router is a revolutionary new product, deliveringhigh-speed wireless Internet access. Nokia RoofTop Wireless Routers combine an RF modem with a digital IP routerboard and specialized wireless routing system, the Nokia AIR Operating System(OS). This combination creates an IP router that is “wireless and intelligent.”Your Nokia RoofTop Wireless Router not only provides you with fast “always-on”Internet access, but is also an integral part of the network infrastructure. Somerouters may rely on others to reach the Internet. It is very important that yourwireless router is always powered ON, even when you are not using it, as it maybe forwarding and routing traffic for other routers in the network.Warnings, Safety Instructionsand Technical SupportImportant User InformationThe Nokia RoofTop Wireless Router was designed and manufactured to meetstrict quality and safety standards. It complies with the FCC rules, Part 15 andwith 21 CFR 1040.10 and 1040.11.This wireless router and its associated components are Class B devices that must be installed and/or moved by a professional.Accessories• Use only Nokia approved accessories for all installations.Cleaning the Unit• Clean the wireless router with a dry cloth or paper towel. Do not use any liquids to clean the unit.Wireless Router Mounting• Install the wireless router on a wall or on a desktop only in its special mountingholder, which provides ventilation and helps protect against spilled liquids.Ventilation Openings• The small openings on the bottom and sides of the unit provide necessaryventilation for the proper operation of the unit. Install the unit so that itslocation or position does not interfere with this ventilation.• Take precautions so that small objects are not dropped into the ventilationopenings.Power•Power Unit- Place the DC power unit out of the way, or tape it to the side of a vertical surface to prevent it from being stepped on or damaged.•Power Cords- Cords should be routed so that they are not likely to be walkedon or pinched by items placed on or against them. Pay particular attention tothe point where cords, plugs, and convenience receptacles exit the unit. TheDC cord should be placed in the strain relief to avoid accidental disconnection.Interference• The wireless router can cause interference to (and interfere with) otherdevices operating in the 2.4 to 2.435 GHz radio spectrum.Instructions• Read and follow all safety and operating instructions• Heed all precautions and warnings in the instructions and on the equipment• Keep instructions for future use Hazard Warnings•Environment - Do not place the unit in a very hot, very cold, dusty, wet, orhigh humidity environment. The unit should be situated away from all heatsources such as radiators, heat registers, stoves, amplifiers, and other heat-producing appliances.•Fire or Electric Shock - Do not expose the wireless router to any type ofmoisture, including rain. Do not use or install near water- related environmentssuch as sinks, bathtubs, laundry areas, spas, swimming pools, or in wet basements. Take care not to spill any liquids on the unit. •RF Exposure – Disconnect power from the wireless router when working within 2 meters of the antenna.Grounding and Polarization• To prevent electric shock, match the wide blade of the plug to the wide slot of the receptacle, then fully insert. Do not use this polarized plug with anextension cord, receptacle or other outlet unless the blades can be fullyinserted to prevent blade exposure.• If an outside antenna is connected to the unit, be sure the antenna system is grounded to provide protection from voltage surges and built-up staticcharges. Section 810 of the National Electrical Code ANSINFPA No 70-1984provides information about proper grounding of the mast and supportingstructure, grounding of the lead-in wire to an antenna discharge unit, connection to grounding electrodes and requirements for the groundingelectrode. All grounding should be performed by a professional.Some routers may rely on others to reach the Internet.It is very important that your wireless router is alwayspowered ON, even when you are not using it, as it maybe forwarding and routing traffic for other routers inthe network.End User Card Comp 1-REV 8/4/00 1:51 PM Page 5

Navigation menu