Nokia Solutions and Networks T5AP1 SC300 800MHz Microcell User Manual frtcov

Nokia Solutions and Networks SC300 800MHz Microcell frtcov

Contents

1 of 2

SCt300 BTS HardwareInstallation, ATP and FRUProcedures Software Release 2.15.x.xSCt300CDMAEnglishDEC 200068P09224A55–1PRELIMINARY
PRELIMINARYNoticeWhile reasonable efforts have been made to assure the accuracy of this document, Motorola, Inc. assumes no liability resulting from anyinaccuracies or omissions in this document, or from use of the information obtained herein. The information in this document has beencarefully checked and is believed to be entirely reliable. However, no responsibility is assumed for inaccuracies or omissions. Motorola,Inc. reserves the right to make changes to any products described herein and reserves the right to revise this document and to makechanges from time to time in content hereof with no obligation to notify any person of revisions or changes. Motorola, Inc. does notassume any liability arising out of the application or use of any product, software, or circuit described herein; neither does it conveylicense under its patent rights or the rights of others.It is possible that this publication may contain references to, or information about Motorola products (machines and programs),programming, or services that are not announced in your country. Such references or information must not be construed to meanthat Motorola intends to announce such Motorola products, programming, or services in your country.CopyrightsThis instruction manual, and the Motorola products described in this instruction manual may be, include or describe copyrightedMotorola material, such as computer programs stored in semiconductor memories or other media. Laws in the United States andother countries preserve for Motorola certain exclusive rights for copyrighted material, including the exclusive right to copy,reproduce in any form, distribute and make derivative works of the copyrighted material. Accordingly, any copyrighted Motorolamaterial contained herein or in the Motorola products described in this instruction manual may not be copied, reproduced,distributed, merged or modified in any manner without the express written permission of Motorola. Furthermore, the purchase ofMotorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under thecopyrights, patents or patent applications of Motorola, as arises by operation of law in the sale of a product.Usage and Disclosure RestrictionsLicense AgreementThe software described in this document is the property of Motorola, Inc. It is furnished by express license agreement only and maybe used only in accordance with the terms of such an agreement.Copyrighted MaterialsSoftware and documentation are copyrighted materials. Making unauthorized copies is prohibited by law. No part of the software ordocumentation may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language orcomputer language, in any form or by any means, without prior written permission of Motorola, Inc.High Risk ActivitiesComponents, units, or third–party products used in the product described herein are NOT fault–tolerant and are NOT designed,manufactured, or intended for use as on–line control equipment in the following hazardous environments requiring fail–safecontrols: the operation of Nuclear Facilities, Aircraft Navigation or Aircraft Communication Systems, Air Traffic Control, LifeSupport, or Weapons Systems (“High Risk Activities”). Motorola and its supplier(s) specifically disclaim any expressed or impliedwarranty of fitness for such High Risk Activities.Trademarks and Motorola are registered trademarks of Motorola, Inc.Product and service names profiled herein are trademarks of Motorola, Inc. Other manufacturers’ products or services profiledherein may be referred to by trademarks of their respective companies.Copyright Copyright 2000 Motorola, Inc. All Rights ReservedPrinted on Recyclable PaperREV010600SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
DEC 2000 iSCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYTable of ContentsSCt300 BTS Hardware Installation, ATP and FRU ProceduresSoftware Release 2.15.x.xList of Figures v. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . List of Tables xi. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Foreword xvii. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General Safety xx. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Revision History xxii. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Patent Notification xxiii. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chapter 1: IntroductionIntroduction 1-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Required Documents 1-11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installation Tools and Materials 1-12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ATP Tools and Materials 1-16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FRU Tools and Materials 1-21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Unit Identification 1-22. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installation and ATP Order 1-32. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chapter 2: Site PreparationSite Preparation Overview 2-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Site Inspections 2-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Prepare Site for the Arrival of the Equipment 2-6. . . . . . . . . . . . . . . . . . . . . . . . . . Dimensions and Clearances 2-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chapter 3: Installing Mounting Bracket and Remote GPSOverview 3-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Unpacking the Equipment and Inspecting for Damage 3-2. . . . . . . . . . . . . . . . . . . Attaching the Mounting Bracket to a Wall 3-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Attaching the Mounting Bracket to a Ceiling 3-9. . . . . . . . . . . . . . . . . . . . . . . . . . . Attaching the Mounting Bracket to a Pole 3-12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Attaching the Mounting Bracket to a Rack 3-16. . . . . . . . . . . . . . . . . . . . . . . . . . . . Attaching Back Solar Cover to Mounting Bracket 3-19. . . . . . . . . . . . . . . . . . . . . . . Remote GPS Head Installation 3-21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table of Contents – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 2000iiChapter 4: Preparing Site Cabling for Sites Equipped withCustomer–Supplied Site I/O InterfaceCabling Overview 4-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cable Descriptions 4-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Site Cabling for BTS With Customer–Supplied Site I/O Interface 4-8. . . . . . . . . . Power, Ground, and Battery Cabling for Sites Equipped With Customer–Supplied Site I/O Interface 4-16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Antenna Cabling for Sites Equipped With Customer–Supplied Site I/O Interface 4-21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Site I/O , Span Line, RGPS and Modem Cabling for Sites Equipped WithCustomer–Supplied Site I/O Interface 4-24. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RGPS Cabling for Multi–BTS Configurations 4-31. . . . . . . . . . . . . . . . . . . . . . . . . Span Line Daisy Chain Cabling 4-36. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chapter 5: Preparing Site Cabling for Sites Equipped with Optional Primary Surge SuppressorCabling Overview 5-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Site Cabling for BTS With Optional Primary Surge Suppressor 5-2. . . . . . . . . . . . Attaching Surge Suppressor to Mounting Bracket 5-10. . . . . . . . . . . . . . . . . . . . . . . Power, Ground and Battery Cabling for Sites Equipped With Optional Primary Surge Suppressor 5-12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Antenna Cabling for Sites Equipped With Optional Primary Surge Suppressor 5-18Site I/O, Span Line, RGPS and Modem Cabling for Sites Equipped With Primary Surge Suppressor 5-24. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RGPS Cabling for Multi–BTS Configurations Equipped with Optional Primary Surge Suppressor 5-32. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Span Line Daisy Chain Cabling for Sites Equipped with Optional Primary Surge Suppressor 5-37. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chapter 6: Installing the Unit and Installation Check Off ListUnit Installation Overview 6-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connector Locations 6-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Attaching Back Fin Cover to Unit 6-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Attaching Optional Installation Handles to the Unit 6-6. . . . . . . . . . . . . . . . . . . . . Attaching Unit to Mounting Bracket 6-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Earth Ground Cabling 6-11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Attaching Front Fin Cover to Unit 6-14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Attaching the Site I/O Junction Box to the Unit 6-15. . . . . . . . . . . . . . . . . . . . . . . . Attaching the Short Duration Battery to the Unit (optional) 6-17. . . . . . . . . . . . . . . Short Duration Battery Cabling 6-19. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC Power Cabling 6-21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table of Contents – continuedDEC 2000 iiiSCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYDC Power Cabling 6-23. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Antenna Cabling for Sites Equipped With Customer–Supplied Site I/O Interface 6-25. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Antenna Cabling for Sites Equipped with Optional Primary Surge Suppressor 6-30. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MIB Cabling for Multi–Unit Configurations 6-38. . . . . . . . . . . . . . . . . . . . . . . . . . . SU Cabling 6-44. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Terminating Unused Connections 6-51. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Powering on Unit and Mounting the Solar Cover 6-52. . . . . . . . . . . . . . . . . . . . . . . Site Cleanup 6-56. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installation Completion Checklist 6-57. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chapter 7: Optimization and Optional Acceptance Test Procedures (ATP)ATP Overview 7-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BTS Preparation 7-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Test Equipment and LMF Connection 7-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BTS Configuration 7-15. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BTS Software 7-24. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Test Equipment Setup 7-29. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Test Equipment Selection 7-37. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Power Meter Calibration 7-38. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Test Cable Calibration 7-39. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Create CAL File 7-42. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RF Path Audit 7-44. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Acceptance Tests 7-46. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CDMA Operating Frequency Programming Information – North American PCS Bands 7-48. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TX & RX Acceptance Tests 7-53. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Generate an ATP Report 7-60. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Copy LMF CAL File to CBSC 7-61. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Prepare to Leave the Site 7-63. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chapter 8: Optimization and Optional Acceptance Test Procedures (ATP) for FrequencyHopping Pilot Beacon (FHPB)ATP Overview 8-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Create CAL File 8-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RF Path Audit 8-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Acceptance Tests 8-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TX Acceptance Tests 8-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table of Contents – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 2000ivGenerate an ATP Report 8-11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Copy LMF CAL File to CBSC 8-12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chapter 9: Field Replaceable Unit (FRU) ProceduresField Replaceable Unit (FRU) Overview 9-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Shut Down & Restoring BTS Signaling 9-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Site I/O Junction Box Replacement Procedure 9-13. . . . . . . . . . . . . . . . . . . . . . . . . Short Duration Battery Replacement Procedures 9-16. . . . . . . . . . . . . . . . . . . . . . . . Remote GPS Replacement Procedures 9-19. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Full Unit Replacement Procedures 9-21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Appendix A: Outdoor Grounding Guidelines OverviewOutdoor Grounding Guidelines Summary A-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Index
DEC 2000 vSCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYList of FiguresSCt300 BTS Hardware Installation, ATP and FRU ProceduresSoftware Release 2.15.x.xFigure 1-1: MicroCell Unit Mounted on a Wall 1-4. . . . . . . . . . . . . . . . . . . . . . . . . Figure 1-2: Primary Surge Suppressor Mounted on a Wall 1-5. . . . . . . . . . . . . . . . Figure 1-3: MicroCell Unit Mounted on a Rack 1-6. . . . . . . . . . . . . . . . . . . . . . . . Figure 1-4: Primary Surge Suppressor Mounted on a Rack 1-7. . . . . . . . . . . . . . . . Figure 1-5: MicroCell Unit Mounted on a Pole 1-8. . . . . . . . . . . . . . . . . . . . . . . . . Figure 1-6: Primary Surge Suppressor Mounted on a Pole 1-9. . . . . . . . . . . . . . . . Figure 1-7: PicoCell Unit Mounted on a Ceiling 1-10. . . . . . . . . . . . . . . . . . . . . . . . Figure 1-8: RS232–IEEE488 Converter Serial Cable Configuration 1-18. . . . . . . . . Figure 1-9: General Block Diagram Showing the Port Names 1-22. . . . . . . . . . . . . Figure 1-10: General Block Diagram Showing the Unit, Site I/O Interface, and External Items 1-23. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 1-11: Microcell and Picocell Unit 1-24. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 1-12: Site I/O Junction Box and Cable 1-24. . . . . . . . . . . . . . . . . . . . . . . . . . Figure 1-13: Primary Surge Suppressor (Optional) 1-25. . . . . . . . . . . . . . . . . . . . . . Figure 1-14: AC Installation Box (Optional) 1-25. . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 1-15: Mounting Bracket for both Microcell and Primary Surge Suppressor 1-26. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 1-16: Mounting Bracket for Picocell 1-26. . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 1-17: Adapters for Rack Mounting 1-27. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 1-18: Adapters for Pole Mounting 1-28. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 1-19: Adapter for Ceiling Mounting (Optional) 1-29. . . . . . . . . . . . . . . . . . . Figure 1-20: Installation Handles for Lifting Unit (Optional) 1-29. . . . . . . . . . . . . . Figure 1-21: Short Duration Battery (Optional) 1-29. . . . . . . . . . . . . . . . . . . . . . . . . Figure 1-22: Front and Back Solar Covers for MicroCell 1-30. . . . . . . . . . . . . . . . . Figure 1-23: Front and Back Solar Covers for Surge Suppressor 1-30. . . . . . . . . . . Figure 1-24: Front and Back Fin Covers for MicroCell and PicoCell (PicoCell shown) 1-31. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 2-1: Securing Lights with Tape 2-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 2-2: Overall Dimensions of MicroCell and PicoCell Units 2-10. . . . . . . . . . Figure 2-3: Overall Dimensions of Primary Surge Suppressor 2-11. . . . . . . . . . . . .
List of Figures – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 2000viFigure 2-4: Installation and Functional Clearances for MicroCell Units (with Solar Covers) 2-12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 2-5: Installation and Functional Clearances for MicroCell Units (without Solar Covers) 2-13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 2-6: Installation and Functional Clearances for PicoCell Units (without Solar Covers) 2-14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 2-7: Installation and Functional Clearances for Primary Surge Suppressor(without Solar Covers) 2-15. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 2-8: Installation and Functional Clearances for Primary Surge Suppressor (with Solar Covers) 2-16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 2-9: Installation and Functional Clearances for PicoCell Unit Mounted to Ceiling 2-17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 2-10: Concept of Functionality Clearances for MicroCell and PicoCell Units 2-18. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 3-1: Holes to Use to Mount the Bracket to the Wall 3-4. . . . . . . . . . . . . . . . Figure 3-2: Securing Mounting Bracket to a Wall 3-8. . . . . . . . . . . . . . . . . . . . . . . Figure 3-3: Picocell Ceiling Mounting Bracket 3-10. . . . . . . . . . . . . . . . . . . . . . . . . Figure 3-4: Securing Mounting Bracket to the Adapter 3-11. . . . . . . . . . . . . . . . . . . Figure 3-5: Pole Adapter and Straps 3-14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 3-6: Attaching Mounting Bracket to a Pole 3-15. . . . . . . . . . . . . . . . . . . . . . Figure 3-7: Attaching the Mounting Bracket to a Rack 3-18. . . . . . . . . . . . . . . . . . . Figure 3-8: Attaching MicroCell Back Solar Cover to Mounting Bracket 3-20. . . . Figure 3-9: Installing the Remote GPS Head 3-22. . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 4-1: Site Cabling for One Microcell 4-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 4-2: Site Cabling for Two Microcells 4-9. . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 4-3: Site Cabling for Three Microcells 4-10. . . . . . . . . . . . . . . . . . . . . . . . . . Figure 4-4: Site Cabling for Four Microcells 4-11. . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 4-5: Site Cabling for One Picocell 4-12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 4-6: Site Cabling for Two Picocells 4-13. . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 4-7: Site Cabling for Three Picocells 4-14. . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 4-8: Site Cabling for Four Picocells 4-15. . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 4-9: AC Input Cable Connector Information 4-17. . . . . . . . . . . . . . . . . . . . . Figure 4-10: DC Input Cable Connector Information 4-18. . . . . . . . . . . . . . . . . . . . Figure 4-11: AC Installation Box 4-20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 4-13: Antenna Cabling Details 4-21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 4-14: Antenna Cabling for Three Microcells 4-22. . . . . . . . . . . . . . . . . . . . . Figure 4-15: Antenna Cabling for Maximum of Four Microcells or Picocells 4-23. Figure 4-16: Site I/O Cabling Details (MicroCell Unit Shown) 4-25. . . . . . . . . . . . Figure 4-17: Site I/O Interface Cabling for RGPS (Synchronous) Configurations 4-33. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
List of Figures – continuedDEC 2000 viiSCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYFigure 4-18: Site I/O Interface Cabling for HSO (Non–Synchronous) Configurations 4-34. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 4-18: Site I/O Interface Cabling for Span Line Daisy Chain Cabling 4-37. . Figure 5-1: Site Cabling for One Microcell with Primary Surge Suppressor 5-2. . Figure 5-2: Site Cabling for Two Microcells with Primary Surge Suppressor 5-3. Figure 5-3: Site Cabling for Three Microcells with Primary Surge Suppressor 5-4Figure 5-4: Site Cabling for Four Microcells with Primary Surge Suppressor 5-5. Figure 5-5: Site Cabling for One Picocell with Primary Surge Suppressor 5-6. . . . Figure 5-6: Site Cabling for Two Picocells with Primary Surge Suppressor 5-7. . . Figure 5-7: Site Cabling for Three Picocells with Primary Surge Suppressor 5-8. . Figure 5-8: Site Cabling for Four Picocells with Primary Surge Suppressor 5-9. . . Figure 5-9: Attaching the Surge Suppressor to the Mounting Bracket 5-11. . . . . . . Figure 5-10: AC Input Cable Connector Information 5-13. . . . . . . . . . . . . . . . . . . . Figure 5-11: DC Input Cable Connector Information 5-14. . . . . . . . . . . . . . . . . . . . Figure 5-12: Primary Surge Suppressor AC Input Power Connection Locations 5-16Figure 5-14: Antenna Cabling Details 5-18. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 5-15: Antenna Cabling for one Microcell with Primary Surge Suppressor 5-19. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 5-16: Antenna Cabling for Two Microcells with Primary Surge Suppressor 5-20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 5-17: Antenna Cabling for Three Microcells with Primary Surge Suppressor 5-20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 5-18: Antenna Cabling for Four Microcells with Primary Surge Suppressor 5-21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 5-19: Antenna Cabling for one Picocell with Primary Surge Suppressor 5-21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 5-20: Antenna Cabling for Two Picocells with Primary Surge Suppressor 5-22. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 5-21: Antenna Cabling for Three Picocells with Primary Surge Suppressor 5-22. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 5-22: Antenna Cabling for Four Picocells with Primary Surge Suppressor 5-23. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 5-22: Site I/O Cabling Details with Optional Primary Surge Suppressor (MicroCell Unit Shown) 5-25. . . . . . . . . . . . . . Figure 5-23: Punchdown Block Location 5-26. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 5-24: Punchdown Block 5-26. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 5-26: Site I/O Interface Cabling for RGPS (Synchronous) Configurations 5-34. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 5-27: Site I/O Interface Cabling for HSO (Non–Synchronous) Configurations 5-35. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 5-27: Site I/O Interface Cabling for Span Line Daisy Chain Cabling 5-38. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
List of Figures – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 2000viiiFigure 6-1: Location of MicroCell Unit Connectors 6-2. . . . . . . . . . . . . . . . . . . . . Figure 6-2: Location of PicoCell Unit Connectors 6-3. . . . . . . . . . . . . . . . . . . . . . . Figure 6-3: Location of Primary Surge Suppressor Connectors 6-4. . . . . . . . . . . . . Figure 6-4: Attaching Back Fin Cover to Unit (Picocell Shown) 6-5. . . . . . . . . . . Figure 6-5: Attaching the Installation Handles to the Unit (Picocell Shown) 6-7. . Figure 6-6: Attaching the Unit to the Mounting Bracket 6-10. . . . . . . . . . . . . . . . . . Figure 6-7: Detail Location of Ground Stud 6-12. . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 6-8: Grounding Stud on Mounting Bracket 6-13. . . . . . . . . . . . . . . . . . . . . . Figure 6-9: Attaching Front Fin Cover to Unit (Picocell Shown) 6-14. . . . . . . . . . . Figure 6-10: Attaching the Site I/O Junction Box to the Unit 6-16. . . . . . . . . . . . . . Figure 6-11: Attaching the Short Duration Battery to the Unit 6-18. . . . . . . . . . . . . Figure 6-12: Battery Cable Installation 6-20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 6-14: AC Power Cabling Details 6-22. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 6-14: DC Power Cabling Details 6-24. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 6-16: Antenna Cabling Details for MicroCell and PicoCell Unit 6-26. . . . . . Figure 6-17: Antenna Cabling for Two Microcells 6-27. . . . . . . . . . . . . . . . . . . . . . Figure 6-18: Antenna Cabling for Three Microcells 6-27. . . . . . . . . . . . . . . . . . . . . Figure 6-19: Antenna Cabling for Four Microcells 6-28. . . . . . . . . . . . . . . . . . . . . . Figure 6-20: Antenna Cabling for Two Picocells 6-28. . . . . . . . . . . . . . . . . . . . . . . . Figure 6-21: Antenna Cabling for Three Picocells 6-29. . . . . . . . . . . . . . . . . . . . . . . Figure 6-22: Antenna Cabling for Four Picocells 6-29. . . . . . . . . . . . . . . . . . . . . . . Figure 6-23: Installation of Third and Fourth Antenna Lightning Arrestors 6-31. . . Figure 6-24: Antenna Cabling Details for MicroCell and PicoCell Unit Equipped with Primary Surge Suppressor 6-32. . . . . . . . . . . . . . . . . . Figure 6-25: Antenna Cabling for Two Microcells Equipped with Primary Surge Suppressor 6-33. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 6-26: Antenna Cabling for Three Microcells Equipped with Primary Surge Suppressor 6-34. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 6-27: Antenna Cabling for Four Microcells Equipped with Primary Surge Suppressor 6-35. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 6-28: Antenna Cabling for Two Picocells Equipped with Primary Surge Suppressor 6-36. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 6-29: Antenna Cabling for Three Picocells Equipped with Primary Surge Suppressor 6-36. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 6-30: Antenna Cabling for Four Picocells Equipped with Primary Surge Suppressor 6-37. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 6-31: MIB Cabling for Two Units 6-42. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 6-32: MIB Cabling for Three Units 6-42. . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 6-33: MIB Cabling for Four Units 6-43. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
List of Figures – continuedDEC 2000 ixSCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYFigure 6-34: SU Cabling Details for Single MicroCell or Picocell 6-48. . . . . . . . . . Figure 6-35: SU Cabling Details for Two Units 6-49. . . . . . . . . . . . . . . . . . . . . . . . . Figure 6-36: SU Cabling Details for Three Units 6-49. . . . . . . . . . . . . . . . . . . . . . . . Figure 6-37: SU Cabling Details for Four Units 6-50. . . . . . . . . . . . . . . . . . . . . . . . Figure 6-38: Lock Positions on Primary Surge Suppressor 6-54. . . . . . . . . . . . . . . . Figure 6-39: Location of AC Power Breakers on Primary Surge Suppressor 6-54. . Figure 6-40: Front Solar Cover 6-55. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 7-1: Front Solar Cover (MicroCell Illustrated) 7-2. . . . . . . . . . . . . . . . . . . . Figure 7-2: Location of AC and DC Power Breakers 7-3. . . . . . . . . . . . . . . . . . . . . Figure 7-3: Location of AC Power Breakers Inside Primary Surge Suppressor 7-4Figure 7-4: How To Remove The Diagnostic Access Cover (Microcell shown) 7-5Figure 7-5: Detail Location of the Diagnostic Access Area for MicroCell 7-6. . . . Figure 7-6: Detail Location of the Diagnostic Access Area for PicoCell 7-6. . . . . Figure 7-7: BTS to LMF connection 7-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 7-8: 15–Pin MMI/LMF Serial Connector 7-8. . . . . . . . . . . . . . . . . . . . . . . . Figure 7-9: R3465 Communications Test Set Timing Signal Detail (Advantest R3465) 7-11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 7-10: Communications Test Set Timing Signal Detail (CyberTest, HP 8935, HP 8921) 7-12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 7-11: LMF to Test Equipment Connection 7-13. . . . . . . . . . . . . . . . . . . . . . . Figure 7-12: RS232–IEEE488 Converter Serial Cable Configuration 7-14. . . . . . . . Figure 7-13: Power Meter Detail 7-35. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 7-14: Cable Calibration Test Setup 7-41. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 7-15: North America PCS Frequency Spectrum (CDMA Allocation) 7-48. . Figure 7-16: North American Cellular Telephone System Frequency Spectrum (CDMA Allocation). 7-51. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 7-17: TX ATP Setup (CyberTest, HP 8935 and Advantest R3465 7-56. . . . . Figure 7-18: TX ATP Setup (HP 8921A) 7-57. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 7-19: RX ATP Setup (CyberTest, HP 8935 and Advantest) 7-58. . . . . . . . . . Figure 7-20: RX ATP Setup (HP 8921A) 7-59. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 7-21: How To Replace The Diagnostic Access Cover (Microcell shown) 7-65Figure 9-1: FRU Items 9-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 9-2: Front and Back Solar Covers for MicroCell 9-3. . . . . . . . . . . . . . . . . . Figure 9-3: Front and Back Fin Covers for MicroCell and PicoCell (PicoCell shown) 9-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 9-4: Site I/O Junction Box Replacement 9-15. . . . . . . . . . . . . . . . . . . . . . . . . Figure 9-5: Battery Replacement 9-18. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 9-6: RGPS Head Replacement 9-20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
List of Figures – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 2000xFigure 9-7: Unit Replacement (MicroCell shown) 9-24. . . . . . . . . . . . . . . . . . . . . . .
DEC 2000 xiSCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYList of TablesSCt300 BTS Hardware Installation, ATP and FRU ProceduresSoftware Release 2.15.x.xTable 1-1: Tools and Materials for Pole Mounting 1-13. . . . . . . . . . . . . . . . . . . . . . . Table 1-2: Tools and Materials for Rack Mounting 1-13. . . . . . . . . . . . . . . . . . . . . . Table 1-3: Mounting Bracket Tools and Materials for Concrete Wall Mounting 1-14Table 1-4: Tools and Materials for Concrete Ceiling 1-15. . . . . . . . . . . . . . . . . . . . . Table 1-5: Tools Required to Perform FRU Procedures 1-21. . . . . . . . . . . . . . . . . . . Table 2-1: Procedure to Prepare the Site for the BTS 2-7. . . . . . . . . . . . . . . . . . . . Table 2-2: Installation Dimensions for the MicroCell and PicoCell Units 2-8. . . . Table 2-3 Minimum Clearances MicroCell and PicoCell Units 2-9. . . . . . . . . . . . . Table 2-4 Minimum Clearances for Surge Suppressor 2-9. . . . . . . . . . . . . . . . . . . . Table 3-1: Mounting Bracket Tools and Materials for Concrete Wall Mounting 3-5Table 3-2: Procedure to Drill Holes in the Wall for Mounting Bracket Installation 3-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 3-3: Procedure to Secure the Mounting Bracket to a Wall 3-7. . . . . . . . . . . . Table 3-4: Tools and Materials for Concrete Ceiling 3-10. . . . . . . . . . . . . . . . . . . . . Table 3-5: Procedure to Secure the Mounting Bracket to the Adapter 3-11. . . . . . . . Table 3-6: Tools and Materials for Pole Mounting 3-12. . . . . . . . . . . . . . . . . . . . . . . Table 3-7: Procedure for Attaching the Mounting Bracket to a Pole 3-13. . . . . . . . . Table 3-8: Tools and Materials for Rack Mounting 3-16. . . . . . . . . . . . . . . . . . . . . . Table 3-9: Procedure to Attach the Mounting Bracket to a Rack 3-16. . . . . . . . . . . . Table 3-10: Procedure to attach Back Solar Cover to Mounting Bracket 3-19. . . . . Table 3-11: Installing the RGPS Head 3-21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 4-1: Cable Descriptions and Part Numbers 4-2. . . . . . . . . . . . . . . . . . . . . . . . Table 4-2: Microcell Expansion Kit for Units 1 to 2 Short MIB A (Cubicle) – T448AL 4-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 4-3: Microcell Expansion Kit for Units 1 to 2 Long MIB A (Non–Cubicle) – T448AM 4-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 4-4: Picocell Expansion Kit for Units 1 to 2 Short MIB A (Cubicle) – T448AN 4-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 4-5: Picocell Expansion Kit for Units 1 to 2 Long MIB A (Non–Cubicle) – T448AP 4-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 4-6: Microcell/Picocell Expansion Kit for Units 2 to 3 Current 2m MIB B – T448AR 4-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
List of Tables – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 2000xiiTable 4-7: Microcell/Picocell Expansion Kit for Units 2 to 3 Long 5m MIB B – T448AS 4-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 4-8: Microcell/Picocell Expansion Kit for Units 3 to 4 Current 2m MIBs B and C – T448AT 4-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 4-9: Microcell/Picocell Expansion Kit for Units 3 to 4 Longer 5M MIBs B and C – T448AU 4-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 4-10: Picocell Expansion Kit for Units 3 to 4 Current 2M MIBs B and C – T448AV 4-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 4-11: Picocell Expansion Kit for Units 3 to 4 Longer 5M MIBs B and C – T448AW 4-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 4-12: RGPS Synchronization Cable Kit – SGKN4351A 4-7. . . . . . . . . . . . Table 4-13: RGPS Synchronization Cable Kit – SGKN4352A 4-7. . . . . . . . . . . . Table 4-14: Cables Needed for Power, Earth Ground, and Battery Connections 4-17Table 4-15: AC Input Cable Information 4-17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 4-16: DC Input Cable Information 4-18. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 4-17: Procedure to Install Earth Ground Cable 4-18. . . . . . . . . . . . . . . . . . . . . Table 4-18: Procedure to Install AC Input Cable(s) (Indoor Applications) 4-19. . . . Table 4-19: Procedure to Install AC Installation Box (Optional – Required for Outdoor Installations) 4-19. . . . . . . . . . . . . . . . . . . . . . . . Table 4-20: AC Installation Box Cabling 4-19. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 4-21: Procedure to Install DC Input Cable(s) 4-20. . . . . . . . . . . . . . . . . . . . . . Table 4-24: Cables Needed for Antenna Connections 4-21. . . . . . . . . . . . . . . . . . . . Table 4-25: Pin and Signal Information for Cable C (Antenna Cable) 4-21. . . . . . . Table 4-26: Cables Needed for Antenna Connections 4-24. . . . . . . . . . . . . . . . . . . . Table 4-27: Pin/Signal Information for Site I/O Cable 4-26. . . . . . . . . . . . . . . . . . . . Table 4-28: Connecting the RGPS to the Site I/O Cable 4-29. . . . . . . . . . . . . . . . . . Table 4-29: Cable Descriptions and Part Numbers 4-31. . . . . . . . . . . . . . . . . . . . . . . Table 4-30: RGPS Synchronization Cable Kit – SGKN4351A 4-31. . . . . . . . . . . . Table 4-31: RGPS Synchronization Cable Kit – SGKN4352A 4-31. . . . . . . . . . . . Table 4-32: Multi–BTS Cable Run List 4-35. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 4-31: Cable Descriptions and Part Numbers 4-36. . . . . . . . . . . . . . . . . . . . . . . Table 4-32: Cable Run List for Span Line Daisy Chain Cabling 4-38. . . . . . . . . . . . Table 5-1: Procedure to Attach the Surge Suppressor to the Mounting Bracket 5-10Table 5-2: Cables Needed for Power, Earth Ground, and Battery Connections 5-13. Table 5-3: AC Input Cable Information 5-13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 5-4: DC Input Cable Information 5-14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 5-5: Procedure to Install the Master Ground Cable on a BTS Equipped with Optional Primary Surge Suppressor 5-14. . . . . . . . . . . . . . . . . Table 5-6: Procedure to Install Earth Ground Cable on a BTS Equipped with Optional Primary Surge Suppressor 5-15. . . . . . . . . . . . . . . . .
List of Tables – continuedDEC 2000 xiiiSCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYTable 5-7: Procedure to Install AC Input Cable(s) on a BTS Equipped with Optional Primary Surge Suppressor 5-15. . . . . . . . . . . . . . . . . Table 5-8: Procedure to Install DC Input Cable(s) 5-17. . . . . . . . . . . . . . . . . . . . . . . Table 5-11: Cables Needed for Antenna Connections 5-18. . . . . . . . . . . . . . . . . . . . Table 5-12: Pin and Signal Information for Cables C and D (Antenna Cable) 5-18. Table 5-13: Procedure to Install Antenna Cabling for Sites Equipped with Primary Surge Suppressor 5-19. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 5-12: Cables Needed for Antenna Connections 5-24. . . . . . . . . . . . . . . . . . . . Table 5-13: Procedure to Install Site I/O Cable Between Site I/O Junction Box andOptional Primary Surge Suppressor 5-25. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 5-14: Pin/Signal Information for Site I/O Cable and Punchdown Block 5-28. Table 5-15: Connecting the RGPS to the Site I/O Cable 5-30. . . . . . . . . . . . . . . . . . Table 5-18: Cable Descriptions and Part Numbers 5-32. . . . . . . . . . . . . . . . . . . . . . . Table 5-19: RGPS Synchronization Cable Kit – SGKN4351A 5-32. . . . . . . . . . . . Table 5-20: RGPS Synchronization Cable Kit – SGKN4352A 5-32. . . . . . . . . . . . Table 5-21: Multi–BTS RGPS Cable Run List for Primary Surge Suppressor 5-36. Table 5-20: Cable Descriptions and Part Numbers 5-37. . . . . . . . . . . . . . . . . . . . . . . Table 5-21: Cable Run List for Span Line Daisy Chain Cabling 5-39. . . . . . . . . . . . Table 6-1: Procedure to Attach Rear Fin Cover to Units 6-5. . . . . . . . . . . . . . . . . . Table 6-2: Installation Handle Kit – SGLN5754 6-6. . . . . . . . . . . . . . . . . . . . . . . . Table 6-3: Procedure to Attach the Installation Handles to the Unit 6-6. . . . . . . . . Table 6-4: Procedure to Attach the Unit to the Mounting Bracket 6-9. . . . . . . . . . . Table 6-5: Ground Cable Description and Part Number 6-11. . . . . . . . . . . . . . . . . . . Table 6-6: Procedure to Attach the Earth Ground Cables 6-11. . . . . . . . . . . . . . . . . Table 6-7: Procedure to Attach Front Fin Cover to Unit 6-14. . . . . . . . . . . . . . . . . . Table 6-8: Procedure to Attach the Site I/O Junction Box to the Unit 6-15. . . . . . . . Table 6-9: Procedure to Attach a Site I/O Cap to the Unit (optional) 6-16. . . . . . . . Table 6-10: Procedure to Attach the Short Duration Battery to the Unit 6-17. . . . . . Table 6-11: Procedure to Connect the Short Duration Battery Cable to Unit 6-19. . Table 6-13: AC Input Cable Description and Part Number 6-21. . . . . . . . . . . . . . . . Table 6-14: Procedure to Connect AC Power to the Unit 6-21. . . . . . . . . . . . . . . . . Table 6-14: DC Input Cable Description and Part Number 6-23. . . . . . . . . . . . . . . . Table 6-15: Procedure to Connect DC Power to the Unit 6-23. . . . . . . . . . . . . . . . . Table 6-17: Cable Descriptions and Part Numbers 6-25. . . . . . . . . . . . . . . . . . . . . . . Table 6-18: Cable Descriptions and Part Numbers 6-30. . . . . . . . . . . . . . . . . . . . . . . Table 6-19: Procedure to Install Antenna Lightning Arrestors 6-30. . . . . . . . . . . . . . Table 6-20: MIB Terminators 6-38. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 6-21: Microcell Expansion Kit for Units 1 to 2 Short MIB A (Cubicle) – T448AL 6-38. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
List of Tables – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 2000xivTable 6-22: Microcell Expansion Kit for Units 1 to 2 Long MIB A (Non–Cubicle) – T448AM 6-39. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 6-23: Picocell Expansion Kit for Units 1 to 2 Short MIB A (Cubicle) – T448AN 6-39. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 6-24: Picocell Expansion Kit for Units 1 to 2 Long MIB A (Non–Cubicle) – T448AP 6-39. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 6-25: Microcell/Picocell Expansion Kit for Units 2 to 3 Current 2m MIB B – T448AR 6-39. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 6-26: Microcell/Picocell Expansion Kit for Units 2 to 3 Long 5m MIB B – T448AS 6-40. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 6-27: Microcell/Picocell Expansion Kit for Units 3 to 4 Current 2m MIBs B and C – T448AT 6-40. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 6-28: Microcell/Picocell Expansion Kit for Units 3 to 4 Longer 5M MIBs B and C – T448AU 6-40. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 6-29: Picocell Expansion Kit for Units 3 to 4 Current 2M MIBs B and C – T448AV 6-41. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 6-30: Picocell Expansion Kit for Units 3 to 4 Longer 5M MIBs B and C – T448AW 6-41. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 6-31: Cables Needed for SU Connections 6-44. . . . . . . . . . . . . . . . . . . . . . . . Table 6-32: Microcell Expansion Kit for Units 1 to 2 Short MIB A (Cubicle) – T448AL 6-44. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 6-33: Microcell Expansion Kit for Units 1 to 2 Long MIB A (Non–Cubicle) – T448AM 6-45. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 6-34: Picocell Expansion Kit for Units 1 to 2 Short MIB A (Cubicle) – T448AN 6-45. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 6-35: Picocell Expansion Kit for Units 1 to 2 Long MIB A (Non–Cubicle) – T448AP 6-45. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 6-36: Microcell/Picocell Expansion Kit for Units 2 to 3 Current 2m MIB B – T448AR 6-45. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 6-37: Microcell/Picocell Expansion Kit for Units 2 to 3 Long 5m MIB B – T448AS 6-46. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 6-38: Microcell/Picocell Expansion Kit for Units 3 to 4 Current 2m MIBs B and C – T448AT 6-46. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 6-39: Microcell/Picocell Expansion Kit for Units 3 to 4 Longer 5M MIBs B and C – T448AU 6-46. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 6-40: Picocell Expansion Kit for Units 3 to 4 Current 2M MIBs B and C – T448AV 6-47. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 6-41: Picocell Expansion Kit for Units 3 to 4 Longer 5M MIBs B and C – T448AW 6-47. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 6-42: Install the SU Cable on One MicroCell or PicoCell 6-47. . . . . . . . . . . . Table 6-43: Install SU Cabling for Multi–BTS Configurations 6-48. . . . . . . . . . . . . Table 6-44: Terminations of Unused Connectors 6-51. . . . . . . . . . . . . . . . . . . . . . . . Table 6-45: Terminations of Unused Connectors 6-51. . . . . . . . . . . . . . . . . . . . . . . . Table 6-46: Procedure to Power on the Unit and Mount the Solar Cover 6-52. . . . .
List of Tables – continuedDEC 2000 xvSCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYTable 6-47: Procedure to Power on the Surge Suppressor, the Unit, and Mount the Solar Cover 6-53. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 6-47: Installation Completion Checklist 6-58. . . . . . . . . . . . . . . . . . . . . . . . . . Table 7-1: Procedure for Removing Diagnostic Access Cover 7-5. . . . . . . . . . . . . Table 7-2: 15–Pin MMI/LMF Serial Cable Information 7-8. . . . . . . . . . . . . . . . . . Table 7-3: Interfacing test equipment to the BTS 7-9. . . . . . . . . . . . . . . . . . . . . . . . Table 7-4: Connect the Communication Test Set and Power Meter to the LMF 7-13Table 7-5: Create a HyperTerminal Connection 7-15. . . . . . . . . . . . . . . . . . . . . . . . . Table 7-6: Establishing MMI Communication 7-17. . . . . . . . . . . . . . . . . . . . . . . . . . Table 7-7: Updating Default Channel Setting to Customer Operating Channel 7-18Table 7-8: Verify BTS Sync Mode 7-20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 7-9: Verify DPLL Tracking 7-20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 7-10: Verify Default Startup Coordinates 7-22. . . . . . . . . . . . . . . . . . . . . . . . . Table 7-11: Create Site–Specific BTS Directory 7-24. . . . . . . . . . . . . . . . . . . . . . . . Table 7-12: Start the LMF and Login to the BTS 7-25. . . . . . . . . . . . . . . . . . . . . . . Table 7-13: Update BTS Specific CDF File Device Load Version 7-26. . . . . . . . . . Table 7-14: Download/Enable MAWI 7-27. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 7-15: System Status LED States 7-28. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 7-16: Selecting Test Equipment Manually in a Serial Connection Tab 7-30. . Table 7-17: Selecting Test Equipment Using Auto-Detect 7-31. . . . . . . . . . . . . . . . . Table 7-18: Test Equipment Calibration 7-32. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 7-19: R3465 Calibration Procedure 7-33. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 7-20: Gigatronics Power Meter GPIB Address Procedure 7-35. . . . . . . . . . . . Table 7-21: Test Equipment Setup 7-36. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 7-22: Test Equipment Selection 7-37. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 7-23: Calibrate the Power Meter 7-38. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 7-24: Automated Cable Calibration 7-40. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 7-25: Create CAL File 7-43. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 7-26: RF Path Audit 7-45. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 7-27: 1900 MHz TX and RX Frequency vs. Channel 7-49. . . . . . . . . . . . . . . Table 7-28: 800 MHz TX and RX Frequency vs. Channel 7-51. . . . . . . . . . . . . . . . Table 7-29: TX Acceptance Test Outline 7-53. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 7-30: TX Test Using Backup Synchronization 7-53. . . . . . . . . . . . . . . . . . . . . Table 7-31: RX ATP Test 7-55. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 7-32: Generate an ATP Report 7-60. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 7-33: Copy Files from LMF to a Diskette 7-61. . . . . . . . . . . . . . . . . . . . . . . . Table 7-34: Copying CAL Files from Diskette to the CBSC 7-62. . . . . . . . . . . . . . .
List of Tables – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 2000xviTable 7-35: Remove External Test Equipment 7-63. . . . . . . . . . . . . . . . . . . . . . . . . . Table 7-36: Reset BTS and Remote Site Initialization 7-63. . . . . . . . . . . . . . . . . . . . Table 7-37: Bring BTS into Service 7-64. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 7-38: Remove LMF 7-64. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 8-1: Create CAL File 8-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 8-2: RF Path Audit 8-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 8-3: TX Acceptance Test Outline 8-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 8-4: TX Test Using Backup Synchronization 8-8. . . . . . . . . . . . . . . . . . . . . . Table 8-5: Generate an ATP Report 8-11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 8-6: Copy Files from LMF to a Diskette 8-12. . . . . . . . . . . . . . . . . . . . . . . . . Table 8-7: Copying CAL Files from Diskette to the CBSC 8-13. . . . . . . . . . . . . . . . Table 9-1: Login and Access Alarm Window Procedure 9-4. . . . . . . . . . . . . . . . . . Table 9-2: Shut Down Signaling Functions 9-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 9-3: Restore Signaling Operations 9-9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 9-4: Item Number Replacement List 9-13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 9-5: Remove the Failed Site I/O Junction Box 9-14. . . . . . . . . . . . . . . . . . . . . Table 9-6: Install the Replacement Site I/O Junction Box 9-14. . . . . . . . . . . . . . . . . Table 9-7: Item Number Replacement List 9-16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 9-8: Remove the Failed Short Duration Battery 9-17. . . . . . . . . . . . . . . . . . . . Table 9-9: Install the Replacement Short Duration Battery 9-17. . . . . . . . . . . . . . . . Table 9-10: Item Number Replacement List 9-19. . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 9-11: Remove the Failed RGPS Head 9-19. . . . . . . . . . . . . . . . . . . . . . . . . . . Table 9-12: Install the Replacement RGPS Head 9-20. . . . . . . . . . . . . . . . . . . . . . . . Table 9-13: Item Number Replacement List 9-21. . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 9-14: Remove the Failed Unit 9-21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 9-15: Install the New Unit 9-23. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ForewordDEC 2000 xviiSCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYScope of manualThis manual is intended for use by cellular telephone systemcraftspersons in the day-to-day operation of Motorola cellular systemequipment and ancillary devices. It is assumed that the user of thisinformation has a general understanding of telephony, as used in theoperation of the Public Switched Telephone Network (PSTN), and isfamiliar with these concepts as they are applied in the cellularmobile/portable radiotelephone environment. The user, however, is notexpected to have any detailed technical knowledge of the internaloperation of the equipment.This manual is not intended to replace the system and equipmenttraining offered by Motorola, although it can be used to supplement orenhance the knowledge gained through such training.Text conventionsThe following special paragraphs are used in this manual to point outinformation that must be read. This information may be set-off from thesurrounding text, but is always preceded by a bold title in capital letters.The four categories of these special paragraphs are:Presents additional, helpful, non-critical information thatyou can use.NOTEPresents information to help you avoid an undesirablesituation or provides additional information to help youunderstand a topic or concept.IMPORTANT*Presents information to identify a situation in whichequipment damage could occur, thus avoiding damage toequipment.CAUTIONPresents information to warn you of a potentiallyhazardous situation in which there is a possibility ofpersonal injury.WARNING
Foreword – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 2000xviiiThe following typographical conventions are used for the presentation ofsoftware information:SIn text, sans serif BOLDFACE CAPITAL characters (a type stylewithout angular strokes: i.e., SERIF versus SANS SERIF) are used toname a command.SIn text, typewriter style characters represent prompts and thesystem output as displayed on an operator terminal or printer.SIn command definitions, sans serif boldface characters represent thoseparts of the command string that must be entered exactly as shown andtypewriter style characters represent command output responsesas displayed on an operator terminal or printer.SIn the command format of the command definition, typewriterstyle characters represent the command parameters.Changes to manualChanges that occur after the printing date are incorporated into yourmanual by Cellular Manual Revisions (CMRs). The information in thismanual is updated, as required, by a CMR when new options andprocedures become available for general use or when engineeringchanges occur. The cover sheet(s) that accompany each CMR should beretained for future reference. Refer to the Revision History page for a listof all applicable CMRs contained in this manual.Receiving updatesTechnical Education & Documentation (TED) maintains a customerdatabase that reflects the type and number of manuals ordered or shippedsince the original delivery of your Motorola equipment. Also identifiedin this database is a “key” individual (such as DocumentationCoordinator or Facility Librarian) designated to receive manual updatesfrom TED as they are released.To ensure that your facility receives updates to your manuals, it isimportant that the information in our database is correct and up-to-date.Therefore, if you have corrections or wish to make changes to theinformation in our database (i.e., to assign a new “key” individual),please contact Technical Education & Documentation at:MOTOROLA, INC.Technical Education & Documentation1 Nelson C. White ParkwayMundelein, Illinois 60060U.S.A.Phone: Within U.S.A. and Canada 800-872-8225. . . . . Outside of U.S.A. and Canada +1-847-435–5700. . FAX: +1-847-435–5541. . . . . . . . . . . . . . . . . . . . . .
Foreword – continuedDEC 2000 xixSCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYReporting manual errorsIn the event that you locate an error or identify a deficiency in yourmanual, please take time to write to us at the address above. Be sure toinclude your name and address, the complete manual title and partnumber (located on the manual spine, cover, or title page), the pagenumber (found at the bottom of each page) where the error is located,and any comments you may have regarding what you have found. Weappreciate any comments from the users of our manuals.24-hour support serviceIf you have any questions or concerns regarding the operation of yourequipment, please contact the Customer Network Resolution Center forimmediate assistance. The 24 hour telephone numbers are:Arlington Heights, IL 800-433-5202. . . . . . . . . . Arlington Heights, International +1–847-632-5390. . Cork, Ireland 44–1793–565444. . . . . . . . . . . . . . . . . Swindon, England 44–1793–565444. . . . . . . . . . . . .
General SafetyPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 2000xxRemember! . . . Safetydepends on you!!The following general safety precautions must be observed during allphases of operation, service, and repair of the equipment described inthis manual. Failure to comply with these precautions or with specificwarnings elsewhere in this manual violates safety standards of design,manufacture, and intended use of the equipment. Motorola, Inc. assumesno liability for the customer’s failure to comply with these requirements.The safety precautions listed below represent warnings of certain dangersof which we are aware. You, as the user of this product, should followthese warnings and all other safety precautions necessary for the safeoperation of the equipment in your operating environment.Ground the instrumentTo minimize shock hazard, the equipment chassis and enclosure must beconnected to an electrical ground. If the equipment is supplied with athree-conductor ac power cable, the power cable must be either pluggedinto an approved three-contact electrical outlet or used with athree-contact to two-contact adapter. The three-contact to two-contactadapter must have the grounding wire (green) firmly connected to anelectrical ground (safety ground) at the power outlet. The power jack andmating plug of the power cable must meet International ElectrotechnicalCommission (IEC) safety standards.Do not operate in an explosiveatmosphereDo not operate the equipment in the presence of flammable gases orfumes. Operation of any electrical equipment in such an environmentconstitutes a definite safety hazard.Keep away from live circuitsOperating personnel must:Snot remove equipment covers. Only Factory Authorized ServicePersonnel or other qualified maintenance personnel may removeequipment covers for internal subassembly, or componentreplacement, or any internal adjustment.Snot replace components with power cable connected. Under certainconditions, dangerous voltages may exist even with the power cableremoved.Salways disconnect power and discharge circuits before touching them.Do not service or adjust aloneDo not attempt internal service or adjustment, unless another person,capable of rendering first aid and resuscitation, is present.
General Safety – continuedDEC 2000 xxiSCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYDo not substitute parts ormodify equipmentBecause of the danger of introducing additional hazards, do not installsubstitute parts or perform any unauthorized modification of equipment.Contact Motorola Warranty and Repair for service and repair to ensurethat safety features are maintained.Dangerous procedurewarningsWarnings, such as the example below, precede potentially dangerousprocedures throughout this manual. Instructions contained in thewarnings must be followed. You should also employ all other safetyprecautions that you deem necessary for the operation of the equipmentin your operating environment.Dangerous voltages, capable of causing death, are present in thisequipment. Use extreme caution when handling, testing, andadjusting.WARNING
Revision HistoryPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 2000xxiiManual Number68P09224A55Manual TitleSCt300 BTS Hardware Installation, ATP and FRU Procedures Software Release 2.15.x.xVersion InformationThe following table lists the manual version, date of version, andremarks on the version.VersionLevel Date of Issue Remarks1SEP 2000 Draft version for Engineering review.Cellular Manual RevisionInformationThe following table lists Cellular Manual Revision (CMR) number, dateof CMR, and remarks on the CMR.RevisionLevel Date of Issue RemarksCMR No. N.A. No CMRs apply to this manual
Patent NotificationDEC 2000 xxiiiSCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYPatent numbersThis product is manufactured and/or operated under one or more of thefollowing patents and other patents pending:4128740 4661790 4860281 5036515 5119508 5204876 5247544 53013534193036 4667172 4866710 5036531 5121414 5204977 5251233 53013654237534 4672657 4870686 5038399 5123014 5207491 5255292 53032404268722 4694484 4872204 5040127 5127040 5210771 5257398 53032894282493 4696027 4873683 5041699 5127100 5212815 5259021 53034074301531 4704734 4876740 5047762 5128959 5212826 5261119 53054684302845 4709344 4881082 5048116 5130663 5214675 5263047 53070224312074 4710724 4885553 5055800 5133010 5214774 5263052 53075124350958 4726050 4887050 5055802 5140286 5216692 5263055 53094434354248 4729531 4887265 5058136 5142551 5218630 5265122 53095034367443 4737978 4893327 5060227 5142696 5220936 5268933 53111434369516 4742514 4896361 5060265 5144644 5222078 5271042 53111764369520 4751725 4910470 5065408 5146609 5222123 5274844 53115714369522 4754450 4914696 5067139 5146610 5222141 5274845 53134894375622 4764737 4918732 5068625 5152007 5222251 5276685 53197124485486 4764849 4941203 5070310 5155448 5224121 5276707 53217054491972 4775998 4945570 5073909 5157693 5224122 5276906 53217374517561 4775999 4956854 5073971 5159283 5226058 5276907 53233914519096 4797947 4970475 5075651 5159593 5228029 5276911 53253944549311 4799253 4972355 5077532 5159608 5230007 5276913 53275754550426 4802236 4972432 5077741 5170392 5233633 5276915 53295474564821 4803726 4979207 5077757 5170485 5235612 5278871 53296354573017 4811377 4984219 5081641 5170492 5235614 5280630 53393374581602 4811380 4984290 5083304 5182749 5239294 5285447 D3373284590473 4811404 4992753 5090051 5184349 5239675 5287544 D3422494591851 4817157 4998289 5093632 5185739 5241545 5287556 D3422504616314 4827507 5020076 5095500 5187809 5241548 5289505 D3470044636791 4829543 5021801 5105435 5187811 5241650 5291475 D3496894644351 4833701 5022054 5111454 5193102 5241688 5295136 RE318144646038 4837800 5023900 5111478 5195108 5243653 52971614649543 4843633 5028885 5113400 5200655 5245611 52992284654655 4847869 5030793 5117441 5203010 5245629 53010564654867 4852090 5031193 5119040 5204874 5245634 5301188
Patent Notification – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 2000xxivNotes
DEC 2000 SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYChapter 1: IntroductionTable of ContentsIntroduction 1-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Scope of this document 1-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Manual order 1-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Site cleanliness 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Site manager 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . System diagrams 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Configurations 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Required Documents 1-11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Required Documents 1-11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installation Tools and Materials 1-12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Introduction 1-12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tools and Materials for Installing the Mounting Bracket on a Pole 1-13. . . Tools and Materials for Installing the Mounting Bracket on a Rack 1-13. . . Tools and Materials for Installing the Mounting Bracket on a Concrete Wall 1-14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tools and Materials for Installing the Mounting Bracket on a Concrete Ceiling 1-15. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ATP Tools and Equipment 1-16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Policy 1-16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Test equipment calibration 1-16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Test cable calibration 1-16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Equipment Warm–up 1-16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Test Equipment List 1-17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Optional Equipment 1-20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FRU Tools and Materials 1-21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Introduction 1-21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . List of FRUs 1-21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tools and Materials Required to Perform FRU Procedures 1-21. . . . . . . . . Unit Identification 1-22. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Overview 1-22. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installation and ATP Order 1-32. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installation Order 1-32. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ATP Order 1-32. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Table of Contents – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 2000Notes1
IntroductionDEC 2000 1-1SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYScope of this documentThis document provides information pertaining to the hardwareinstallation, cabling installation, ATP and Field Replaceable Unit (FRU)procedures of the Motorola MicroCell and PicoCell SCt300 CDMABase Transceiver Subsystem (BTS) equipment.The FRU procedures do not cover the replacement of modules inside theunit.An individual SCt300 BTS unit will be referred to as the “unit” for theremainder of this document. A BTS site that contains one or moreSCt300 BTS units will be referred to as the “BTS” for the remainder ofthis document.For detailed installation information of non-Motorola equipment, refer tothe vendor manuals provided with such equipment.Manual orderThe installation order is the order of the manual starting at Chapter 1 andcontinuing through Chapter 5. After hardware installation has beencompleted, run the ATP for the system by following the proceduresdefined in Chapter 6 of this manual.Chapter 1“Introduction” — This is a brief outline of the manual. Also provided isa list of additional documents and tools necessary to complete theprocedures.Chapter 2“Site Preparation” — This chapter contains the necessary information toverify the condition of the site.Chapter 3“Installing Mounting Bracket and Remote GPS” — This chaptercontains the necessary information to install the MicroCell/SurgeSuppressor or PicoCell mounting bracket on a wall, pole, rack or ceiling.Chapter 4“Preparing Site Cabling for Sites Equipped with Customer–SuppliedSite I/O Interface” — This chapter contains the procedures for installingthe external cabling for sites equipped with the customer–supplied SiteI/O interface.Chapter 5“Preparing Site Cabling for Sites Equipped with optional Primary SurgeSuppressor” — This chapter contains the procedures for installing theexternal cabling for sites equipped with the optional Primary SurgeSuppressor.Chapter 6“Installing the Unit and Installation Check Off List” — This chaptercontains procedures for installing the unit, mounting the Solar Cover tothe chassis and final Installation Check Off List.1
Introduction – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20001-2Chapter 7“Acceptance Test Procedures (Optional)” – This chapter outlines theATP used for a field audit after a BTS initial installation, if necessary.Chapter 8“Acceptance Test Procedures for Frequency Hopping Pilot Beacon(Optional)” – This chapter outlines the ATP used for a field audit ofunits configured as a Frequency Hopping Pilot Beacon.Chapter 9“Field Replaceable Unit (FRU) Procedures” – This chapter provides theFRU procedures for the BTS system.Appendix A“Outdoor Grounding Guidelines Overview” — This chapter overviewsthe grounding information for external units. Use this chapter forgeneral reference purposes only. It is not meant to replace local codespecifications or site specific directions.Site cleanlinessWhile performing the procedures provided in this document, be surethat:Sfor an internal installation, the site is kept clean and free of tracked-indirtSall packing material has been removed from the equipment.Sall tools not currently in use are picked-up as the installationprogresses.Sall trash is removed from the site at the end of each day and after theinstallation is complete.Sequipment is covered with a tarpaulin whenever possible.Suse a shop-vac whenever you perform an internal installationprocedure that generates dust, such as drilling or cutting.Site managerThe site manager is the person in charge of and responsible for the fullsite. The installer will be verifying a variety of conditions with the sitemanager.System diagramsFigure 1–1 through Figure 1-7 show the MicroCell, PicoCell andoptional Primary Surge Suppressor units mounted on a wall, rack, pole,frame and ceiling (PicoCell only).PicoCell units are the only units that can be mounted on the ceiling. TheMicroCell and Primary Surge Suppressor units can not be mounted onthe ceiling.1
Introduction – continuedDEC 2000 1-3SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYThe MicroCell, PicoCell and Primary Surge Suppressor can be mountedindoors (internal) or can be mounted outdoors (external).ConfigurationsThe MicroCell and PicoCell support single–carrier, omniconfigurations.The cover configurations for the MicroCell and PicoCell units are:SUse solar covers on the Microcell and optional Primary SurgeSuppressor for all outside mounting applications.SUse fin covers on the Microcell or Picocell for indoor applications.SThe Primary Surge Suppressor uses solar covers only.The battery configurations for the MicroCell and PicoCell units are:SShort duration batteryThe power configurations for the MicroCell and PicoCell units are:SAC power onlySDC power onlySAC power with short duration batteryThe synchronization configurations for the MicroCell and PicoCell unitsare:SRemote GPS Receiver – synchronous operation with High StabilityOscillator (HSO) backup.SInternal High Stability Oscillator (HSO) only – non–synchronousoperation.1
Introduction – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20001-4Figure 1-1: MicroCell Unit Mounted on a WallSYSTEM CABLING IS NOT SHOWN.FIN AND SOLAR COVERS REMOVEDFOR CLARITY.1
Introduction – continuedDEC 2000 1-5SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYFigure 1-2: Primary Surge Suppressor Mounted on a WallSYSTEM CABLING IS NOT SHOWN.SOLAR COVERS REMOVED FORCLARITY.1
Introduction – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20001-6Figure 1-3: MicroCell Unit Mounted on a RackSYSTEM CABLING IS NOT SHOWN.FIN AND SOLAR COVERS REMOVEDFOR CLARITY.1
Introduction – continuedDEC 2000 1-7SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYFigure 1-4: Primary Surge Suppressor Mounted on a RackSYSTEM CABLING IS NOT SHOWN.FIN AND SOLAR COVERS REMOVEDFOR CLARITY.1
Introduction – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20001-8Figure 1-5: MicroCell Unit Mounted on a PoleBACK SOLAR COVERSYSTEM CABLING IS NOT SHOWN.FRONT SOLAR COVER IS REMOVEDFOR CLARITY.1
Introduction – continuedDEC 2000 1-9SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYFigure 1-6: Primary Surge Suppressor Mounted on a PoleBACK SOLAR COVERSYSTEM CABLING IS NOT SHOWN.FRONT SOLAR COVER IS REMOVEDFOR CLARITY.1
Introduction – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20001-10Figure 1-7: PicoCell Unit Mounted on a CeilingONLY THE PICOCELL UNIT MAY BEMOUNTED ON THE CEILINGSYSTEM CABLING IS NOT SHOWN.FIN AND SOLAR COVERS REMOVEDFOR CLARITY.1
Required DocumentsDEC 2000 1-11SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYRequired DocumentsThe following documents are required to perform the installation, ATPand FRU procedures of the cell site equipment:SSCt300 BTS Hardware Installation, ATP and FRU – 68P09224A55(This manual)SSite Document (generated by Motorola Systems Engineering), whichincludes:– site specific documentation– channel allocation– contact list (customer)– ancillary/expendable equipment list– site wiring lists– contact list (Motorola support)– job box inventorySDemarcation Document (Scope of Work agreement)SGrounding Guidelines for Cellular Radio Installations(Motorola part number 68P81150E62)SCDMA LMF Operator’s Guide; 68P64114A78.SInstallation manuals for non-Motorola equipment (for referencepurposes).1
Installation Tools and MaterialsPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20001-12IntroductionMany of the tools and materials depend on the style of the wall, pole,rack or ceiling that the mounting bracket is being installed on. The toolsand materials required to install the BTS hardware are specified for eachmounting style. Due to the variability of mounting styles, additionaltools and materials may be required to meet specific site needs. This isoutside of the scope of this document and must be evaluated on a site tosite basis.Also, for each procedure, a tools and materials list is provided within theprocedure.Motorola kit T393AA is available for most installation styles andmethods. Motorola kit T393AA contains:STorque driver wrench, 1/4–in. hex female drive, 0–10 N–mST20 Torx Tamper Bit, 1/4–in. hexST30 Torx Tamper Bit, 1/4–in. hexSFlathead bitSTorque ratchet wrench 3/8–in. drive, 0–10 N–M (Utica part numberTCI–150 R/A 3/8–in. or equivalent)S5/16 Breakaway 9–in. lb.S13/16 Breakaway 38–in. lb.SWire Crimping ToolSInstallation Handles, Motorola Part Numbers (Left Handle0787668C01) and (Right Handle 0787668C02)SScrews M6x19 (Motorola Part Number 0387541C03)SBuckle Strap Tool1
Installation Tools and Materials – continuedDEC 2000 1-13SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYTools and Materials forInstalling the Mounting Bracketon a PoleThe following tools and materials are required to properly and safelyinstall the the mounting bracket on a pole.Table 1-1: Tools and Materials for Pole MountingHand Tools Materials Power ToolsSafety Glasses MicroCell or PicoCellmounting kit No Power Tools RequiredBucklestrap Cutting Tool (Motorolapart number 6604809N01) electrical tape(customer supplied)T30 TORX tamper bit, 1/4–in. hex(pp)Torque driver wrench, 1/4–in. hexfemale drive, 0–10 N–MBall Peen (Metal Working) HammerHeavy GlovesTape MeasureTools and Materials forInstalling the Mounting Bracketon a RackThe following tools and materials are required to properly and safelyinstall the mounting bracket on a rack.Table 1-2: Tools and Materials for Rack MountingHand Tools Materials Power ToolsT30 Torx tamper bit, 1/4–in. hex MicroCell or PicoCellMounting Kit No Power Tools RequiredTorque driver wrench, 1/4–in. hexfemale drive, 0–10 N–M Four machine screws 12–245/8-in. self tapping (customersupplied)Chalk or marker to marklocation on rack(customer supplied)electrical tape(customer supplied)1
Installation Tools and Materials – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20001-14Tools and Materials forInstalling the Mounting Bracketon a Concrete WallThe following tools and materials are required to properly and safelyinstall the mounting bracket on a concrete wall.Table 1-3: Mounting Bracket Tools and Materials for Concrete Wall MountingHand Tools Materials Power ToolsT30 Torx tamper bit, 1/4–in hex metal shim material Hilti wall drilling rig15/16-in. (23.8 mm) socket, a ratchetwrench, and an 18-in. (45.7 cm)breaker barHilti anchors (for eachbracket) Hilti DCM 18–14 metric bitsafety glasses MicroCell or PicoCellMounting Kit shop vacuumchalk for marking outline on wall electrical tape( t li d)tape measure (customer supplied)4-ft (1.22 m) bubble levelrubber malletear plugsdust mask1
Installation Tools and Materials – continuedDEC 2000 1-15SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYTools and Materials forInstalling the Mounting Bracketon a Concrete CeilingThe following tools and materials are required to properly and safelyinstall the the ceiling adapter on a concrete ceiling.Table 1-4: Tools and Materials for Concrete CeilingHand Tools Materials Power ToolsT30 Torx tamper bit, 1/4–in. hex metal shim material Hilti wall drilling rigTorque driver wrench, 1/4–in. hexfemale drive, 0–10 N–M Hilti anchors (qty. of 4 foreach bracket) Hilti DCM 18–14 metric bit15/16-in. (23.8 mm) socket, a ratchetwrench, and an 18-in. (45.7 cm)breaker barPicoCell Mounting Kit shop vacuumsafety glasses Ceiling Mounting Kit*chalk for marking outline on ceiling electrical tape( t li d)tape measure (customer supplied)4-ft (1.22 m) bubble levelrubber malletear plugsdust mask*Optional. Not shipped with unit.1
ATP Tools and MaterialsPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20001-16PolicyTo ensure consistent, reliable and repeatable test results, test equipmentmeeting the following technical criteria should be used to perform theATP on the BTS equipment.During manual testing, you can substitute supported testequipment with other test equipment models not supportedby the LMF. However, they must meet the same technicalspecifications.NOTEIt is the responsibility of the customer to account for any measurementvariances and /or additional losses / inaccuracies that can be introducedas a result of these substitutions. Before beginning the ATP ortroubleshooting, make sure that the test equipment needed is on handand operating properly.Test equipment calibrationOptimum system performance and capacity depend on regular testequipment service, calibration, and characterization. Follow the originalequipment manufacture (OEM) recommended maintenance andcalibration schedules closely.Test cable calibrationEquipment test cables are very important in the ATP. It is recommendedthat the cable calibration be run at every BTS with the test cablesattached. This method compensates for test cable insertion loss withinthe test equipment itself. No other allowance for test cable insertion lossneeds to be made during the performance of tests.Another method is to account for the loss by entering it into the LocalMaintenance Facility (LMF) during the optimization procedure. Thismethod requires accurate test cable characterization in a labenvironment. The cable should be tagged with the characterizationinformation prior to field optimization.Equipment Warm–upAfter arriving at the a site, the test equipment should be plugged in andturned on to allow warm up and stabilization to occur for as long aspossible. The following pieces of test equipment must be warmed–up fora minimum of 60 minutes prior to the ATP.SCommunications Test SetSPower Meter1
ATP Tools and Materials – continuedDEC 2000 1-17SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYTest Equipment ListThe following pieces of test equipment are required during the ATP.Common assorted tools like screwdrivers and keys are not listed but arestill required. Read the owners manual on all of the following majorpieces of test equipment to understand their individual operation prior touse in optimization.Always refer to specific OEM test equipmentdocumentation for detailed operating instructions.NOTECDMA LMF Hardware RequirementsA CDMA LMF computer platform that meets the followingrequirements (or better) is recommended:SNotebook computerSPCMCIA to Serial I/O AdapterS266 MHz (32 bit CPU) Pentium processorS4 Gbyte internal hard disk driveSColor display with 1024 x 768 (recommended) or 800 x 600 pixelresolutionS128 MB RAMSCD ROM driveS3 1/2 inch floppy driveSSerial port (COM 1)SParallel port (LPT 1)SPCMCIA Ethernet interface card (for example, 3COM Etherlink III)with a 10Base–T–to–coax adapterSWindows 98 or higher operating systemIf 800 x 600 pixel resolution is used, the CDMA LMFwindow must be maximized after it is displayed.NOTERS232 to GPIB InterfaceOne National Instruments GPIB–232–CT with MotorolaCGDSEDN04X RS232 serial cable or equivalent; used to interface theLMF to the test equipment.A Standard RS–232 cable can be used with the following modifications:SPin 8 (CTS) does not have to be jumpered/shorted to the others asit is a driver output. The DTR is already a driver output signal.The other pins are to receivers. Short pins 7, 1, 4, 6 on each cable end:1
ATP Tools and Materials – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20001-189–pin D (female) 9–pin D (female)GND 5 5 GNDRX 33 RXTX 22 TXRTS 7 7 RTSRSD/DCD 1 1 RSD/DCDDTR 4 4 DTRDSR 6 6 DSRFigure 1-8: RS232–IEEE488 Converter Serial Cable ConfigurationCTS 8 8 CTSON BOTH CONNECTORS SHORTPINS 7 AND 8;SHORT PINS 1, 4 AND 6Communications Test Set w/JCDMA PCMCIA CardThis procedure requires one of the following test sets:SMotorola CyberTestSAdvantest R3465 and HP 437B or Gigatronics 8541C Power MeterSHewlett–Packard HP 8935SHewlett–Packard HP8921 (w/CDMA and PCS interface for 1.7/1.9GHz) and HP 437B or Gigatronics Power Meter.SRF power meter (average and code domain)SRF signal generator (capable of CDMA modulation)SSpectrum AnalyzerSCDMA code domain analyzerAs of the writing of this manual, the Advantest CDMAcommunications test set is the ONLY CDMA analyzerapproved by Motorola for automated BTS testing.NOTEGPIB cablesTwo Hewlett Packard 10833A or equivalent; 1 or 2 meters long used tointerconnect test equipment and LMF terminal.Power meterThis procedure requires one of the following power meters:SGigatronics Model 8541C with 80601A power sensor capable ofmeasuring from –70 dBm to +23 dBm; supported by the LMF toperform BTS Total Power measurement.1
ATP Tools and Materials – continuedDEC 2000 1-19SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYSHewlett–Packard Model HP437B with HP8481A power sensorcapable of measuring from –30 dBm to 20 dBm.RF attenuators30 dB, 10 Watt minimum RF attenuator to attenuate the transmitteroutput for Microcell tests.BTS serial cableOne BTS serial cable to connect LMF to MMI/LMF connector.Male N to male N cablesThe following male N to male N cables are necessary to do thisprocedure:SOne male N to male N cable. The short RF test cable used for cablecalibration.STwo male N to male N cables. The transmit RF test cable and thereceive RF test cable used for ATP.Male BNC to male N cableOne male BNC to male N cable. This cable is used to allowself–calibration of the Communication Test Set.Male BNC to male cableOne male BNC to male cable. This cable connects the 2 SecondReference to the external trigger of the Communication Test Set.Male BNC to Male SMA cableTwo male BNC to male SMA cables. These cables are is used toconnect the BTS 19.6608 MHz and 2 Second Reference to theCommunication Test Set.Ohm loadOne male N 50 Ohm load to terminate the unused antenna port forMicrocell receive testing.15 to 9–pin DSUB AdapterOne 15 to 9–pin DSUB adapter. This allows connection between theMMI/LMF connector on the BTS and the DB9 cable.Female N to female N adapterOne female N to female N adapter. This allows connection between theshort RF test cable and the transmit RF test cable or the receive RF testcable.BNC–T connectorsOne female and one male port BNC–T connector. This connects the 2Second Reference to the external trigger of the Communication Test Set.1
ATP Tools and Materials – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20001-20Optional EquipmentNone of the optional equipment specified here is supportedby the LMF in automated tests. It is meant to serve as a listof additional equipment that might be required duringmaintenance and troubleshooting operations.NOTEDigital multimeterFluke Model 8062A with Y8134 test lead kit or equivalent; used forprecision DC and AC measurements, requiring 4–1/2 digits.Frequency counterStanford Research Systems SR620 or equivalent. If direct measurementof the 19.6608 MHz references is required.Spectrum analyzerSpectrum Analyzer (HP8594E with CDMA personality card) orequivalent. Required for manual tests other than standard testsperformed by the LMF.Span line (JT1) verification equipmentAs required for local applicationRF test cable (if not provided with test equipment)Motorola model TKN8231A. Used to connect test equipment to theBTS during ATP or general troubleshooting procedures.OscilloscopeTektronics model 2445 or equivalent. Used for waveform viewing,timing and measurements during general troubleshooting procedures.CDMA subscriber mobile or portable radiotelephoneCDMA compatible with power supply and antenna. Used to provide testtransmission and reception during BTS maintenance andtroubleshooting. Two radios will be required for system and drivearound testing after BTS installation and optimization.1
FRU Tools and MaterialsDEC 2000 1-21SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYIntroductionThe following is a list of the FRUs for the Microcell and Picocell unitsand a list of the tools and materials necessary to perform the FRUinstallation and removal procedures:List of FRUsThe following is a list of FRUs for the unit:1. Site I/O Junction Box with Primary Surge Suppressor – Kit T450AE2. Site I/O Junction Box without Primary Surge Suppressor – KitT450AA3. RGPS Head – Kit T472AP4. Short Duration Battery – Kit T348AE5. Primary Surge Suppressor – Kit T449AA6. AC Installation Box – Kit T449ABPicoCell1. A Band BTS with HSO – Kit SG1476AA2. A Band BTS without HSO – Kit SG1477AA3. B Band BTS with HSO – Kit SG1484AA4. B Band BTS without HSO – Kit SG1485AA5. Fin Cover – Kit T389AAMicroCell1. A Band BTS with HSO – Kit SG1478AA2. A Band BTS without HSO – Kit SG1479AA3. B Band BTS with HSO – Kit SG1486AA4. B Band BTS without HSO – Kit SG1487AA5. Solar Cover – Kit T451AA6. Fin Cover – Kit T389ABTools and Materials Requiredto Perform FRU ProceduresThe following is a list of tools and materials required to perform theFRU installation procedures.Table 1-5: Tools Required to Perform FRU ProceduresHand Tools Materials Power ToolsT30 Torx tamper bit, 1/4–in. hex Applicable FRU None RequiredT20 Torx tamper bit, 1/4–in. hex Installation handles(ti l)Torque driver wrench, 1/4–in hexfemale drive, 0–10 N–M(optional)13 mm torque wrench5/16 breakaway torque wrench13/16 breakaway torque wrench1
Unit IdentificationPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20001-22OverviewFigure 1-9 and Figure 1-10 show the various components of theMicroCell and PicoCell systems.Figure 1-9: General Block Diagram Showing the Port Names (MicroCell Unit Shown)SITE I/OJUNCTION BOXDC POWERBREAKERDC INPUTMIB CMIB BMIB AANTENNA AAC POWERBREAKERAC INPUTSU RFSU 2SU 1ANTENNA B(MICROCELL ONLY)1
Unit Identification – continuedDEC 2000 1-23SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYFigure 1-10: General Block Diagram Showing the Unit, Site I/O Interface, and External Items ANT RXANTTX/RXCUSTOMERINPUTSSPANRGPSDCPOWERPHONE(MODEM)ACPOWERSITE I/OINTERFACEMICROCELLONLY(MicroCell Unit Shown)MIBTERMINATORMICROCELLONLY1
Unit Identification – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20001-24Figure 1-11: Microcell and Picocell Unit MICROCELL UNIT PICOCELL UNITFigure 1-12: Site I/O Junction Box and Cable1
Unit Identification – continuedDEC 2000 1-25SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYFigure 1-13: Primary Surge Suppressor (Optional)Figure 1-14: AC Installation Box (Optional)1
Unit Identification – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20001-26Figure 1-15: Mounting Bracket for both Microcell and Primary Surge SuppressorFigure 1-16: Mounting Bracket for Picocell1
Unit Identification – continuedDEC 2000 1-27SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYFigure 1-17: Adapters for Rack Mounting1
Unit Identification – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20001-28Figure 1-18: Adapters for Pole MountingCHANNEL EXTRUSIONCHANNEL CLAMPSEE DETAIL ABUCKLESTRAPUPPER CHANNELEXTRUSIONCHANNEL CLAMPCHANNEL CLAMPLOWER CHANNELEXTRUSIONDETAIL ASEE DETAIL ABUCKLESTRAP1
Unit Identification – continuedDEC 2000 1-29SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYFigure 1-19: Adapter for Ceiling Mounting (Optional)Figure 1-20: Installation Handles for Lifting Unit (Optional)Figure 1-21: Short Duration Battery (Optional)1
Unit Identification – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20001-30Figure 1-22: Front and Back Solar Covers for MicroCell FRONT COVERBACK COVERFigure 1-23: Front and Back Solar Covers for Surge Suppressor FRONT COVERBACK COVER1
Unit Identification – continuedDEC 2000 1-31SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYFigure 1-24: Front and Back Fin Covers for MicroCell and PicoCell (PicoCell shown)BACK COVERFRONT COVER 0149–O_IL.doc1
Installation and ATP OrderPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20001-32Installation OrderThe pieces of the MicroCell, PicoCell and Primary Surge Suppressorunits should be installed in the following order.1. Unpack and inspect hardware.2. Install mounting hardware and bracket(s).3. Install back solar cover to mounting bracket (required for outdoorinstallations and optional for indoor applications).4. Install back fin cover to unit (required for indoor installations).5. Install RGPS.6. Prepare site cabling.7. Attach installation handles to unit (optional).8. Attach and secure unit to mounting bracket.9. Attach and secure Primary Surge Suppressor to mounting bracket(optional).10. Remove installation handles (if used).11. Remove Site I/O dust cover.12. Attach Site I/O junction box to unit.13. Attach all ground cabling to unit(s).14. Attach all cables to unit(s).15. Install short duration battery (if required).16. Attach front solar cover (optional).17. Attach front fin cover (optional).ATP OrderThe ATP for the MicroCell and PicoCell units is performed in thefollowing sequence:1. BTS preparation.2. Connecting the LMF to the BTS.3. Connecting test equipment to the BTS and LMF.4. Establishing an MMI communications session.5. Setting customer operating channel.6. Synchronization verification.7. Install LMF program and binaries.8. Start LMF and log on to BTS.9. Update BTS–specific CDF file device load version.10. Download and enable MAWI.11. Test equipment setup (R3465 Calibration/GPIB address & clocksetup).12. Test equipment selection.13. Power meter calibration.1
Installation and ATP Order – continuedDEC 2000 1-33SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARY14. Test cable calibration.15. Create CAL file.16. RF path audit.17. TX and RX Acceptance tests.18. Generate an ATP Report.19. Copy LMF CAL file to CBSC.20. Terminate LMF session/leave the site.Frequency Hopping PilotBeacon ATP OrderThe Frequency Hopping Pilot Beacon (FHPB) ATP for the MicroCelland PicoCell units is performed in the following sequence:1. Create CAL file.2. RF path audit.3. TX Acceptance tests.4. Generate an ATP Report.5. Copy LMF CAL file to CBSC.6. Terminate LMF session/leave the site.1
Installation and ATP Order – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20001-34Notes1
DEC 2000 SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYChapter 2: Site PreparationTable of ContentsSite Preparation Overview 2-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Overview 2-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . External Installation Versus Internal Installation 2-1. . . . . . . . . . . . . . . . . . Verifications and Procedures 2-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Site Manager 2-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Verifications and Inspections 2-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Site Inspections 2-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inspection Overview 2-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Deficiencies 2-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . What to Inspect 2-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Antenna and Tower Inspections 2-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Structural Inspections and Verifications 2-3. . . . . . . . . . . . . . . . . . . . . . . . Environmental Inspections (indoor only) 2-5. . . . . . . . . . . . . . . . . . . . . . . Grounding Inspections 2-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Prepare Site for the Arrival of the Equipment 2-6. . . . . . . . . . . . . . . . . . . . . . . . . . Description 2-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Equipment Arrival 2-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Securing Fluorescent Lights 2-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Procedure to Prepare the Site for the Equipment 2-7. . . . . . . . . . . . . . . . . . Dimensions and Clearances 2-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MicroCell and PicoCell Overview 2-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Dimensions and Clearances 2-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Unit Dimensions 2-10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Unit Clearances 2-12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Table of Contents – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 2000Notes2
Site Preparation OverviewDEC 2000 2-1SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYOverviewThis chapter provides the procedures and information to verify that thesite is ready to have the equipment installed. It also provides proceduresto ensure the safety of the installation personnel, protect the equipmentfrom damage, and verify the site layout parameters.External Installation VersusInternal InstallationThe MicroCell and PicoCell systems can be installed outdoors (external)or indoors (internal). The site preparation depends on the type ofinstallation and the site characteristics. Most preparations apply to bothtypes (indoor and outdoor) of installations. It is stated when apreparation applies to only one type of installation.All indoor installations must be in a restricted access location.Verifications and ProceduresThe verifications and procedures provided in this chapter are:SExternal site inspectionsSInternal site inspectionsSPreparing site for the arrival of equipmentSSite layout verificationSite ManagerThe site manager is the person in charge of and responsible for the fullsite.Verifications and InspectionsVerifications typically have the installer check with the site manager thata condition has been previously checked or procedure previouslyperformed and meets a stated specification.Inspections typically have the installer personally checking that acondition or item meets stated specifications.2
Site InspectionsPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20002-2Inspection OverviewInspect the site to verify that the necessary equipment has been properlyinstalled. Also, as part of the inspection, verify that the equipment isadequate to support the Motorola equipment. Not all inspections mayapply to every site. The site characteristics determine which inspectionsapply.Installation of ancillary equipment (e.g., power supplies,terminal blocks, etc.) may be the responsibility of theinstaller. Refer questions to your Motorola ProgramManager.NOTEDeficienciesNotify responsible persons of any deficiencies as soon as possible, if theinstaller is not responsible for correcting the noted deficiencies.Deficiencies may need to be corrected before any installation can start.What to InspectThe following external items should be inspected and compared againstany related site-specific documentation.STowersSAntennasSExternal ground systemsSClearances for unitsSMounting StructuresAdditionally, for all sites the incoming power should be inspected andcompared against any related site-specific documentation.Antenna and TowerInspectionsDocumentationThe vendor responsible for supplying the towers should leave theinstallation documentation at the site after the tower has been erected.Review this documentation and compare it with any related site-specificdocuments.InspectionInspect the following:STower paintingSTower lighting (beacons)SAntenna and transmission line installationSGrounding.2
Site Inspections – continuedDEC 2000 2-3SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYStructural Inspections andVerificationsWall loading capacityVerify with the site manager that the wall loading capacity has beenpreviously checked by a qualified Civil Engineer and meets thespecifications stated in the site-specific documentation.Pole loading capacityVerify with the site manager that the pole loading capacity has beenpreviously checked and meets the specifications stated in thesite-specific documentation.Ceiling loading capacityVerify with the site manager that the ceiling loading capacity has beenpreviously checked and meets the specifications stated in thesite-specific documentation.Site powerVerify with the site manager that site power has been previously checkedand meets the specifications stated in the site-specific documentation.Cabling rackFor indoor installations inspect the cable rack for proper installation. Thecable racks should be at least 7 ft from the floor. The cable racks shouldbe electrically tied together with 6 AWG wire, except cable racks that arein an isolated ground zone.Fire protectionFor indoor installations verify with the site manager that some type offixed fire suppression equipment is installed. The possible types are:SHalon gas system, recommended for cell sites because:– Halon extinguishes a fire without removing oxygen from a room.– Halon is clean, allowing for quick cleanup after a fire.– Halon will not damage the cell site equipment.SCO2 (carbon dioxide) system.SSprinkler system. “Dry pipe” sprinkler systems that remove all powerto a room before filling the overhead sprinklers with water arerecommended.In addition to the fixed fire suppression equipment, thereshould be at least two 5-lb ABC class portable fireextinguishers on the premises before equipment installationbegins.WARNING2
Site Inspections – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20002-4Fire Fighting ProceduresCellular infrastructure equipment contains various materials which candecompose into toxic compounds during intense heat. When firefighting conditions are severe, wear full protective clothing, includinghelmet, self–contained, positive pressure or pressure demand breathingapparatus, bunker coat and pants, bands around arms, waist and legs,face mask, and protective covering for exposed areas of the head.Product DisposalThe cooling system of the SCt300 BTS product containsFluorinert FC–84. The cooling system is sealed beforeshipment and should not be incinerated.IMPORTANT*The Material Safety Data Sheet (MSDS) for Fluorinert FC–84 suggestsreclaiming the fluid if feasible. Contact the following office forinformation:3M Center – Performance Materials DivisionBuilding 223–6S–04St. Paul, MN 55144800–833–5045The short duration battery is a lead acid battery. Do notincinerate.IMPORTANT*The Material Safety Data Sheet (MSDS) for Lead AcidBatteries states the spent battery should be sent to a secondary leadsmelter for recycling.Antenna cables and portsInspect the antenna cables and ports to verify that:SAll antenna cables have been properly labeled.SAntenna ports have been properly weatherproofed.SAn adequate number of ports exist to handle all of the requiredantenna runs.SLightning arrestors have been installed at the site (sites equipped withoptional Primary Surge Suppressor do not require this). Lightningarrestors are shipped with the optional Primary Surge Suppressor andPrimary Surge Suppressor expansion kit.SFor some systems, special ports may be required (refer to thesite-specific information for further details).2
Site Inspections – continuedDEC 2000 2-5SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYAlarmsVerify with the site manager that any of the following alarms called outin the site-specific documentation have been installed and previouslychecked for meeting the site-specific documentation specifications.SvandalismSsurface waterSintrusionSfireSbuilding high/low temperaturesSany customer-specific options.The interface of the alarms to the Motorola equipment will be part of thecell site equipment installation.Environmental Inspections(indoor only)Temperature controlVerify with the site manager that the cell site building has beenpreviously checked for the ability to maintain a temperature range asspecified by Motorola. The life span of electronic equipment isshortened by environmental variations, even though it is designed tooperate in extreme temperatures.Grounding InspectionsFor external installationsFor outside installations refer to the site specific documentation.For internal installationsFor indoor installations refer to the Grounding Guideline for CellularRadio Installations (68P81150E62) for all grounding inspectionprocedures.Verify the following:SAll ground cables have a bend radius of 20 cm (8 inches) or more.SMetallic lines (span, phone[modem], RGPS, power and antenna) thatenter or leave the site should be equipped with a 3-electrode gas tubeprotector. The ground side of the gas tubes should be tied to theMaster Ground Bus (MGB). This is not necessary if your site isequipped with the Primary Surge Suppressor.SAll installed cable racks (in the same ground zone) are jumperedtogether.Cable racks in an Isolated Ground Zone (IGZ) are not to beconnected to a cable rack in a non-IGZ. For moreinformation on IGZ, see Grounding Guideline for CellularRadio Installations, Motorola part number 68P81150E62.WARNING2
Prepare Site for the Arrival of the EquipmentPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20002-6DescriptionThis information covers various topics not all of which are needed atevery site. Based on the site characteristics execute the steps that applyto your site. Before installing the equipment, do the following to ensurethe safety of installation personnel and to protect the equipment.Equipment ArrivalBefore the equipment arrives, indicate to the transport company an areaat the site where the equipment can be unloaded and, if necessary,unpacked. The equipment should be carefully delivered to the site, alongwith all equipment dollies and padding required to safely move theequipment from the unloading area to the cell site. The following shouldalso be provided, outdoor weather protection, temporary lighting andpower for lighting and power tools.Securing Fluorescent LightsFigure 2-1 illustrates the use of tape to secure fluorescent tubes. Secureany fluorescent tubes that may be hit or damaged by any unit, cable, orpersonnel.Figure 2-1: Securing Lights with TapeApply masking tape to keepfluorescent tubes in place inthe fixtures. 0150–O_IL.doc2
Prepare Site for the Arrival of the Equipment – continuedDEC 2000 2-7SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYProcedure to Prepare the Sitefor the EquipmentTable 2-1: Procedure to Prepare the Site for the BTSStep Action1If some type of protective padding is available install itaround any existing equipment at the site that could bedamaged during installation of the units.2Hang plastic sheets around intended work areas to preventdust and debris from damaging co-located equipment duringinstallation.3Secure any fluorescent tubes in place using masking tape.(Refer to Figure 2-1.)NOTEThis will prevent the tubes from being inadvertently jarredfrom the fixtures during the installation of equipment orcables.4Locate the demarcation blocks for external utilities.Verify that they are shown on the Site Engineeringdocuments, and determine the required cable routing back tothe equipment frames.5Verify the following:SDC power is available and meets the site documentationspecifications (if applicable).SAC power is available and meets the site documentationspecifications (if applicable).SCable rack is installed per site document specifications.SOutdoor cable runs are installed and meet local buildingcodes.SSpan line termination tie points are available.SCustomer input termination tie points are available.SPhone tie-in points (modem) are available.SPhone access is available (if applicable).SThere is clear access to move the equipment to the desiredmounting area.SThere is sufficient space for installation and service accessto the equipment.SCustomer supplied shelters are installed.2
Dimensions and ClearancesPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20002-8MicroCell and PicoCellOverviewThis information covers the dimensions and clearances associated withthe MicroCell and PicoCell Units.Dimensions and ClearancesTable 2-2, Table 2-3, Figure 2-2 through Figure 2–7 show the installeddimensions and recommended clearances for each item.Table 2-2: Installation Dimensions for the MicroCell and PicoCellUnitsItem Height Width Depth WeightMicroCell(fullyinstalled)730 mm28.76 in. 590 mm23.25 in. 254 mm10.01 in. 38.5 kg84.7 lbsMicroCell(unit only) 590 mm23.22 in. 450 mm17.71 in. 150 mm5.90 in. 24 kg52.8 lbsPicoCell(fullyinstalled)525 mm20.66 in. 500 mm19.68 in. 144 mm5.66 in. 30.5 kg67.1 lbsPicoCell(unit only) 510 mm20.08 in. 450 mm17.71 in. 110 mm4.33 in. 15 kg33 lbsPrimarySurgeSuppressor(fullyinstalled)730 mm28.76 in. 590 mm23.25 in. 254 mm10.01 in. 19.17 kg42.26 lbsPrimarySurgeSuppressor(unit only)510 mm20.08 in. 465 mm18.32 in. 125 mm4.93 in. 11 kg24.26 lbs2
Dimensions and Clearances – continuedDEC 2000 2-9SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYTable 2-3 Minimum Clearances MicroCell and PicoCell UnitsVertical MountingItem Front Back Left Right Top BottomInstallation andMaintenanceRequirements600 mm23.62 in. 0100 mm3.93 in. 200 mm7.87 in. 0 0FunctionalRequirements(with solar cover)0 0 100 mm3.93 in. 200 mm **50 mm1.96 in. **50 mm1.96 in.FunctionalRequirements(without solarcover)Ceiling Mounting (PicoCell Only)Item Front Back Left Right Top BottomInstallation andMaintenanceRequirements200 mm7.87 in. 100 mm3.93 in. 0 0 0 600 mm23.62 in. FunctionalRequirements(without solarcover)*1000 mm39.37 in. 0*1000 mm39.37 in. *1000 mm39.37 in. 0 0* Within these boundaries, area must remain 75% unobstructed. This is the open surface area at any crosssection.** Within these boundaries, area must remain 25% unobstructed. This is the open surface area at any crosssection. See Figure 2-10.Table 2-4 Minimum Clearances for Surge SuppressorVertical MountingItem Front Back Left Right Top BottomInstallation andMaintenanceRequirements600 mm23.62 in. 0200 mm7.87 in. 200 mm7.87 in. 0 0FunctionalRequirements(without solarcover)0 0 100 mm3.93 in. 100 mm3.93 in. 0 0FunctionalRequirements(with solar cover)0 0 0 0 0 02
Dimensions and Clearances – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20002-10Unit Dimensions The unit dimensions are shown below.Figure 2-2: Overall Dimensions of MicroCell and PicoCell UnitsPicoCell UnitMicroCell Unit 730mm (28.76 in.) 590 mm (23.25 in.)450mm (17.71in.) 590mm (23.22in.) 150mm (5.90in.) 450mm (17.71in.) 510mm (20.08 in.)110mm (4.33in.) 500mm (19.68in.) 144mm (5.66in.) 525mm (20.66in.) 254 mm (10.01 in.)2
Dimensions and Clearances – continuedDEC 2000 2-11SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYFigure 2-3: Overall Dimensions of Primary Surge Suppressor 125 mm (4.93 in.) 465 mm (18.32 in.) 510 mm (20.08 in) 730mm (28.76 in.) 590 mm (23.25 in.) 254 mm (10.01 in.)With Solar CoverWithout Solar Cover 2
Dimensions and Clearances – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20002-12Unit ClearancesThe unit clearances are shown below.Figure 2-4: Installation and Functional Clearances for MicroCell Units (with Solar Covers)50 mm air exhaust area50 mm air intake area100 mm clearance for installation handles200 mm clearance for tool access600 mm from front of unit for FRU installation and removalMICROCELL WITH SOLAR COVERS0 mm Functional Clearance in Front of Microcell With Solar Cover2
Dimensions and Clearances – continuedDEC 2000 2-13SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYFigure 2-5: Installation and Functional Clearances for MicroCell Units (without Solar Covers)50 mm air exhaust area100 mm clearance for installation handles200 mm clearance for tool access50 mm air intake area600 mm from front of unit for FRU installation and removalMICROCELL WITHOUT SOLAR COVERS50 mm Air Intake (Functional)2
Dimensions and Clearances – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20002-14Figure 2-6: Installation and Functional Clearances for PicoCell Units (without Solar Covers)50 mm air exhaust area100 mm clearance for installation handles200 mm clearance for tool access50 mm air intake area50 mm Air Intake Area (Functional)600 mm from front of unit for FRU installation and removal0196–O_IL.docPICOCELL WITHOUT SOLAR COVERS2
Dimensions and Clearances – continuedDEC 2000 2-15SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYFigure 2-7: Installation and Functional Clearances for Primary Surge Suppressor (without Solar Covers)200 mm clearance for tool access600 mm from front of unit for unit installation and removalPRIMARY SURGE SUPPRESSOR WITHOUT SOLAR COVERS200 mm clearance for tool access2
Dimensions and Clearances – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20002-16Figure 2-8: Installation and Functional Clearances for Primary Surge Suppressor (with Solar Covers)200 mm clearance for tool access600 mm from front of unit for FRU installation and removalPRIMARY SURGE SUPPRESSOR WITH SOLAR COVERS200 mm clearance for tool access2
Dimensions and Clearances – continuedDEC 2000 2-17SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYFigure 2-9: Installation and Functional Clearances for PicoCell Unit Mounted to CeilingFor PicoCell horizontal mounting assume unit is in a volume (400H x 600W x 500D)as shown below. Additional clearances are measured from edge of the volume.500mm600mm500mmFUNCTIONALITY CLEARANCESINSTALLATION CLEARANCESCEILINGCEILING600mm400mm1000mm1000mm1000mm400mm600mm200mm100mm2
Dimensions and Clearances – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20002-18Figure 2-10: Concept of Functionality Clearances for MicroCell and PicoCell UnitsTHIS ILLUSTRATION SHOWS THE CONCEPT OF HOWTHE AREA ABOVE AND BELOW THE SCt340 BTSSHOULD BE AT LEAST 25% UNOBSTRUCTED. THEREIS NO BOX AROUND THE UNIT. BOX IS USED FORILLUSTRATION PURPOSES ONLY2
DEC 2000 SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYChapter 3: Installing Mounting Bracket and Remote GPSTable of ContentsOverview 3-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Overview 3-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Procedure order 3-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Unpacking the Equipment and Inspecting for Damage 3-2. . . . . . . . . . . . . . . . . . . Objective 3-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . How System is Packed 3-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inspecting for Damage 3-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Attaching the Mounting Bracket to a Wall 3-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Objective 3-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mounting Bracket Hole Locations 3-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Required Tools and Materials for Concrete Wall Mounting 3-5. . . . . . . . . Procedure to Drill Holes in the Wall 3-6. . . . . . . . . . . . . . . . . . . . . . . . . . . Securing Mounting Bracket to a Wall 3-7. . . . . . . . . . . . . . . . . . . . . . . . . . Attaching the Mounting Bracket to a Ceiling 3-9. . . . . . . . . . . . . . . . . . . . . . . . . . . Objective 3-9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mounting Bracket Hole Locations 3-9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tools and Materials for Installing the Mounting Bracket on a Ceiling 3-10. Securing Mounting Bracket to Adapter 3-11. . . . . . . . . . . . . . . . . . . . . . . . . Attaching the Mounting Bracket to a Pole 3-12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Objective 3-12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Required Tools and Materials for Pole Mounting 3-12. . . . . . . . . . . . . . . . . Procedure to Attach the Mounting Bracket to a Pole 3-13. . . . . . . . . . . . . . Attaching the Mounting Bracket to a Rack 3-16. . . . . . . . . . . . . . . . . . . . . . . . . . . . Objective 3-16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tools and Materials for Installing the Mounting Bracket on a Rack 3-16. . . Procedure to Attach the Mounting Bracket to a Rack 3-16. . . . . . . . . . . . . . Attaching Back Solar Cover to Mounting Bracket 3-19. . . . . . . . . . . . . . . . . . . . . . . Objective 3-19. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . When to Use the Cover 3-19. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Required tools 3-19. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Procedure 3-19. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Remote GPS Head Installation 3-21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Objective 3-21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tools and Materials 3-21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installation Procedure 3-21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Table of Contents – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 2000Notes3
OverviewDEC 2000 3-1SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYOverviewThis chapter provides the information and procedures to:SUnpack the equipment and inspect for damage.SInstall rack, pole or ceiling adapters.SInstall the mounting bracket on a wall, pole, rack or ceiling.SAttach the unit and covers to the mounting bracket.Procedure orderThe process of installing the mounting bracket and Remote GPS receiverrequires that the following procedures be completed in the order shown.1. Unpack the equipment and inspect for damage.2. Install the mounting hardware on a wall, rack, pole or ceiling.3. Attach the back solar cover.4. Install the Remote GPS head.3
Unpacking the Equipment and Inspecting for DamagePRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20003-2ObjectiveThe objective of this procedure is to unpack the equipment and inspect itfor damage.How System is PackedA unit is shipped in two boxes. Box 1 contains site installation specificcomponents and box 2 contains the unit itself. All of the following areshipped in box 1.Box 1SSolar or fin coversSUniversal mounting bracketSRack mounting adapters and hardwareSPole mounting adapters and hardwareSCeiling mounting adapter (Optional Kit T391AA)SExternal cables (AC input, DC input and SU)SLower pinSSite I/O junction box and cable assemblySTerminationsSAC Installation Box (required for outdoor applications)Box 2SMicrocell or Picocell unitBox 3 (Optional)SPrimary Surge SuppressorSSolar coversSMounting bracketSRack mounting adapters and hardwareSPole mounting adapters and hardwareSGround cablesThe following are shipped separately:SShort duration battery (optional) (Kit T392AA)SRemote GPS receiver (optional)Inspecting for DamageBefore installing any equipment, inspect it for damage. Report anydamage found to the Site Manager.Only remove the equipment from the shipping containers when you areready to install.3
Unpacking the Equipment and Inspecting for Damage – continuedDEC 2000 3-3SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYInspect items for:SdentsSscratchesSbent pins in connectorsSsquareness of bracketSdamage to heatsink finsSisolating pads, washers on mounting bracketSfrayed cabling or chafed connectors 3
Attaching the Mounting Bracket to a WallPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20003-4ObjectiveThe objective of this procedure is to attach the mounting bracket on aconcrete wall.For all applications always consult a licensed CivilEngineer to determine the exact (Zone 3 and/or Zone 4)compliance of your specific site.CAUTIONIf your site requires the optional Primary Surge Suppressor,then you must install two mounting brackets.NOTEMounting Bracket HoleLocationsFigure 3-1 shows the holes to use to attach the mounting bracket to awall.Figure 3-1: Holes to Use to Mount the Bracket to the WallHOLES TO BE USED TO MOUNT THE BRACKET3
Attaching the Mounting Bracket to a Wall – continuedDEC 2000 3-5SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYRequired Tools and Materialsfor Concrete Wall MountingDo not use toggle bolts in sheet rock (dry wall). They willnot hold the system and they will damage the wall.CAUTIONDue to the many types of walls that the BTS could potentially bemounted to, it is impossible to detail all types in the context of thismanual. For this reason, the installers must use good judgement and getrecommendations from qualified personnel regarding the type ofmounting bolts that are appropriate for the particular walls on which theBTS will be mounted.Concrete wallThe following tools and materials are required to properly and safelyinstall the the mounting bracket on a concrete wall.Table 3-1: Mounting Bracket Tools and Materials for Concrete Wall MountingHand Tools Materials Power ToolsT30 Torx tamper bit, 1/4–in hex metal shim material Hilti wall drilling rigTorque driver wrench, 1/4–in hexfemale drive, 0–10 N–M Hilti anchors (for eachbracket) Hilti DCM 18–14 metric bit15/16-in. (23.8 mm) socket, a ratchetwrench, and an 18-in. (45.7 cm)breaker barMicroCell or PicoCellMounting Kit shop vacuumsafety glasses electrical tapechalk for marking outline on walltape measure4-ft (1.22 m) bubble levelrubber malletear plugsdust mask3
Attaching the Mounting Bracket to a Wall – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20003-6Procedure to Drill Holes in theWallSafety glasses, dust masks, and ear plugs must be worn byall installation personnel, including those in the immediatevicinity of the personnel operating the drilling equipment.WARNINGTable 3-2: Procedure to Drill Holes in the Wall for Mounting BracketInstallationStep Action1Verify with the site manager that the wall has been previouslychecked and is capable of supporting the weight of thesystem.2Hold the bracket in position and mark the mounting holelocations.3Prepare a standard 3/8” electric drill or the Hilti wall drillingrig.4Install the appropriate bit in the drill using the followinginformation:SFor concrete walls use the Hilti DCM 18–14 metric bit andHilti anchors.5Begin to drill by using short bursts until the bit has a “bite”into the wall.6Run the drill at full speed to the appropriate depth. Check thedepth of the hole by using the shop vacuum to collect thedebris.* IMPORTANTFor concrete installation, the hole MUST be at least 5 in.(12.7 cm) deep. Anchors can not be removed once they aretapped into the hole.7Repeat steps 5 through 6 for each mounting hole.8Proceed to the “Procedure to Secure the Mounting Bracket toa Wall”, Table 3-3.3
Attaching the Mounting Bracket to a Wall – continuedDEC 2000 3-7SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYSecuring Mounting Bracket toa Wall Refer to Figure 3-1 and Figure 3-2 and follow the procedure in Table 3-3to secure the mounting bracket to a wall.Table 3-3: Procedure to Secure the Mounting Bracket to a WallStep Action* IMPORTANTUse the shoulder washers attached to the mounting bracket ineach mounting hole to electrically isolate the mountingbracket from the wall.1Insert a Hilti anchor into each mounting hole. Tap eachanchor using a rubber mallet until each anchor is completelyseated in a hole.2Position the mounting bracket on the wall over the mountingholes. Start, but do not tighten all bolts.! CAUTIONOnly put shims under the bracket where the isolation pad ispresent. Do not place shims so that they will contact the baremetal of the frame.3Place a 4-ft (1.22 m) level on the bracket from top-to-bottom.Then, using metal shim material, level the bracket.4Use a 15/16-in. (23.8 mm) socket, a ratchet wrench, and an18-in. (45.7 cm) breaker bar, to tighten the red cap of eachanchor bolt until the red cap shears off.NOTEWhen the red cap shears off, the anchor bolt has beentightened to the correct torque.3
Attaching the Mounting Bracket to a Wall – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20003-8Figure 3-2: Securing Mounting Bracket to a Wall(FROM TOP TO BOTTOM)BOLT AND PLASTICSHOULDER WASHERTHREADED INTOANCHOR THROUGHMOUNTING BRACKET(FROM TOP TO BOTTOM)LAG SCREW, AND PLASTICSHOULDER WASHERTHREADED INTO PILOTHOLE THROUGHMOUNTING PLATE.BRACKET(FOR CLARITY, THEREST OF THEBRACKET IS NOTSHOWN)LAG SCREW CONCRETE ANCHORSTUDWALLPLACE SCREW THROUGH HOLES0156–O_IL.doc3
Attaching the Mounting Bracket to a CeilingDEC 2000 3-9SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYObjectiveThe objective of this procedure is to attach the adapter and mountingbracket to a ceiling.You can only mount the Picocell to a ceiling.IMPORTANT*Due to the many types of ceilings that the BTS may be mounted to, it isimpossible to detail all types in the context of this manual. For thisreason, the installers must use good judgement and get recommendationsfrom qualified personnel regarding the type of mounting bolts that areappropriate for the particular ceiling mount for the BTS.For all applications always consult a licensed CivilEngineer to determine the exact (Zone 3 and/or Zone 4)compliance of your specific site.CAUTIONThe top surface of the ceiling adapter must be mountedhorizontally. The bubble level indicator in the center of thebracket must have the bubble in the center of the innerblack circle after mounting the adapter. Failure to do socould cause damage to the unit and would void thewarranty.CAUTIONMounting Bracket HoleLocationsThe ceiling adapter has been provided with multiple mounting optionsdependent on special site requirements. Specific holes to complete theinstallation are site specific. They are to be provided by site installationteams in accordance with a Civil Engineer to determine the exactcompliance for your specific site. The ceiling mounting bracket isprovided for correct installation angle only. Figure 3-1 shows some ofthe holes that can be used to attach the adapter to the ceiling.3
Attaching the Mounting Bracket to a Ceiling – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20003-10Figure 3-3: Picocell Ceiling Mounting BracketMOUNTING PROVISIONS – EXACT USE IS SITE SPECIFICTools and Materials forInstalling the Mounting Bracketon a CeilingConcrete ceilingThe following tools and materials are required to properly and safelyinstall the the ceiling adapter on a concrete ceiling.Table 3-4: Tools and Materials for Concrete CeilingHand Tools Materials Power Tools15/16-in. (23.8 mm) socket, a ratchetwrench, and an 18-in. (45.7 cm)breaker barmetal shim material Hilti wall drilling rigsafety glasses Hilti anchors (qty. of 4 foreach bracket) Hilti DCM 18–14 metric bitT30 Torx tamper bit, 1/4–in. hex Ceiling Mounting Kit shop vacuumTorque driver wrench, 1/4–in. hexfemale drive, 0–10 N–M electrical tapeear plugs chalk for marking outline onceiling4-ft (1.22 m) bubble level PicoCell Mounting Kitrubber mallettape measuredust mask3
Attaching the Mounting Bracket to a Ceiling – continuedDEC 2000 3-11SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYSecuring Mounting Bracket toAdapterOnce the adapter has been secured to the ceiling, the procedure inTable 3-5 must be followed to mount the bracket to the adapter.Table 3-5: Procedure to Secure the Mounting Bracket to the AdapterStep Action1Verify that isolating pads and bracket–mounted shoulderwashers are installed on the bracket. If not, contact the sitemanager.2Position the mounting bracket on the ceiling adapter and alignthe mounting holes. See Figure 3-4.3Use a T30 Torx tamper bit to start but not tighten the M6x19screws in each mounting hole. Begin with the outer holes andwork toward the center.4Use a T30 Torx tamper bit to torque each M6x19 screw to5 N–M.Figure 3-4: Securing Mounting Bracket to the AdapterM6x19 SCREWS3
Attaching the Mounting Bracket to a PolePRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20003-12ObjectiveThe objective of this procedure is to attach the mounting bracket to apole.The mounting pole structure must be reviewed for itsability to support the weight of the MicroCell [38.5 kg(84.7 lbs.)]; PicoCell [30.5 kg (67.1 lbs.)] and PrimarySurge Suppressor [19.17 kg (42.26 lbs.)] under high winds,earthquakes, etc.SInstalling the BTS on an inadequate pole may result inserious personal injury even death or damage to theequipment.SPlacement of the BTS should not present a hazard topedestrians by impeding passage, nor to field service personnel by being placed near high voltage or other hazardous conditions.SAll cabling must be constrained in or on the pole inaccordance to local building codes.WARNINGFor all applications always consult a licensed CivilEngineer to determine the exact (Zone 3 and/or Zone 4)compliance of your specific site.CAUTIONRequired Tools and Materialsfor Pole MountingThe following tools and materials are required to properly and safelyinstall the mounting bracket to a pole.Table 3-6: Tools and Materials for Pole MountingHand Tools Materials Power ToolsSafety Glasses MicroCell or PicoCellMounting Kit No Power Tools RequiredBucklestrap Cutting Tool (Motorolapart number 6604809N01) electrical tapeT30 Torx tamper bit, 1/4–in. hexTorque driver wrench, 1/4–in. hexfemale drive, 0–10 N–MBall Peen (Metal Working) HammerHeavy GlovesTape Measure3
Attaching the Mounting Bracket to a Pole – continuedDEC 2000 3-13SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYProcedure to Attach theMounting Bracket to a Pole Follow the procedure in Table 3-7 to attach the mounting bracket to apole.Table 3-7: Procedure for Attaching the Mounting Bracket to a PoleStep Action1Verify that the isolator pads are in place on the bracket.2Verify the safety of the installation location.3Place the bucklestrap through the channel clamp as shown inFigure 3-5.4Place the channel clamp and bucklestrap on the poleapproximately where the upper portion of the BTS is to belocated. See Figure 3-5.5Slide and center the upper channel extrusion on the channelclamp. See Figure 3-5.6Wrap the bucklestrap around the pole and through the fittingon the end of the band. Pull the band until it is makesconcentric contact with the pole.7Start but do not tighten the lower channel extrusion to themounting bracket. Use 2 M6x19 tamper–resistant screws.8Before you tighten the lower strap, attach the mountingbracket to the top channel extrusion.9Slide the bucklestrap through the channel clamp and slide thechannel clamp on the lower channel extrusion. Wrap thebucklestrap around the pole and through the fitting.10 Secure the bucklestrap with the bucklestrap tool. Refer to theinstructions included with the bucklestrap tool.11 Use a T30 Torx tamper bit to tighten the six M6x19 screws to5.0 N–m.12 Center the channel clamp on to the lower extrusion.13 Place the bucklestrap through the lower channel clamp.14 Use the bucklestrap tool to secure the lower strap.3
Attaching the Mounting Bracket to a Pole – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20003-14Figure 3-5: Pole Adapter and StrapsCHANNEL CLAMPUPPER CHANNEL EXTRUSIONPART NUMBER 0709991S02LOWER CHANNEL EXTRUSIONPART NUMBER 0709991S03CHANNEL CLAMPPART NUMBER 4209992S01SIDE VIEW OF CHANNEL CLAMP AND BANDCHANNEL CLAMPPART NUMBER 4209992S01BUCKLESTRAPPART NUMBER 4209993S040159–O_IL.docCHANNELEXTRUSIONBUCKLESTRAP3
Attaching the Mounting Bracket to a Pole – continuedDEC 2000 3-15SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYFigure 3-6: Attaching Mounting Bracket to a PoleM6x19 SCREWSPART NUMBER 0387541C033
Attaching the Mounting Bracket to a RackPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20003-16ObjectiveThe objective of this procedure is to attach the mounting bracket to a19-in. rack.Rack must conform to EIA–RS–310–C or JIS–C–6010 standards.Tools and Materials forInstalling the Mounting Bracketon a RackThe following tools and materials are required to properly and safelyinstall the mounting bracket on a rack.Table 3-8: Tools and Materials for Rack MountingHand Tools Materials Power ToolsTorque driver wrench, 1/4–in. hexfemale drive, 0–10 N–M MicroCell or PicoCellMounting Kit No Power Tools RequiredT30 Torx tamper bit, 1/4–in. hex Four machine screws 12–245/8-in. self tapping (customersupplied)Chalk or marker to marklocation on rackelectrical tape(customer supplied)Procedure to Attach theMounting Bracket to a RackTo attach the mounting bracket to a rack follow the procedure inTable 6-10.Table 3-9: Procedure to Attach the Mounting Bracket to a RackStep Action1Verify that isolating pads and washers are installed in thebracket. If not, contact the site manager.2Use the mounting bracket as a guide to mark the holes in therack to be used to mount the upper adapter.3Use two self–tapping machine screws (customer supplied) toattach the upper rack adapter (Motorola part number0709994S01) to the rack.4Use a T30 Torx tamper bit and two M6x19 screws to attachbut do not tighten the lower rack adapter to the mountingbracket.5Use a T30 Torx tamper bit and four M6x19 screws to attachthe mounting bracket to the upper rack adapter. Do nottighten. . . . continued on next page3
Attaching the Mounting Bracket to a Rack – continuedDEC 2000 3-17SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYTable 3-9: Procedure to Attach the Mounting Bracket to a RackStep Action6Use two machine screws (customer supplied) to attach thelower rack adapter to the rack.7Use a T30 Torx tamper bit to torque the screws connecting themounting bracket to the upper and lower adapters. Torque to5.0 N–M. 3
Attaching Mounting Bracket to a Rack – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20003-18Figure 3-7: Attaching the Mounting Bracket to a RackA=MACHINE SCREW 12–24 5/8 IN.(CUSTOMER SUPPLIED)RACK ADAPTERPART NUMBER 0709994S01MOUNTING BRACKETPART NUMBER 0709994S01 OR S02RACK ADAPTERPART NUMBER0709994S01M6 x19 SCREW (4)M6 x 19 SCREW (2)AAAA3
Attaching Back Solar Cover to Mounting BracketDEC 2000 3-19SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYObjectiveThe objective of this procedure is to attach the back solar cover to themounting bracket.When to Use the CoverSolar Covers are required in all outdoor applicationsRequired toolsThe following tools are required to attach the back solar cover to themounting bracket.STorque driver wrench, 1/4–in. hex female drive, 0–10 N–MST30 Torx bitProcedureAttach the back solar cover to the mounting bracket by following theprocedure in Table 3-10 and the information in Figure 3-8.Table 3-10: Procedure to attach Back Solar Cover to MountingBracketStep Action1Place the back solar cover on the mounting bracket so thecooling vents are at the top. Align the four M6 screws withthe mounting holes.2Using a T30 Torx bit, start but do not tighten all four M6screws.3Using the T30 Torx bit, tighten the four M6 screws to 5.0N–m.3
Attaching Back Solar Cover to Mounting Bracket – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20003-20Figure 3-8: Attaching MicroCell Back Solar Cover to Mounting BracketM6 SCREWS0309959S063
Remote GPS Head InstallationDEC 2000 3-21SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYObjectiveThe objective of this procedure is to show how to install the RemoteGlobal Positioning System (RGPS) head.Tools and MaterialsOne RGPS Head (Motorola Part Number 0186012H03) is required to dothis procedure.Installation ProcedureThe RGPS head must not make contact with any metalsurface other than the provided hardware. Use only theequipment provided to mount the RGPS head. Failure todo so could damage the RGPS head.CAUTIONTable 3-11 and Figure 3-9 show the procedure for installing the RGPShead.Table 3-11: Installing the RGPS HeadStep Action1Determine the mounting location.NOTEThe RGPS head mounting location is critical to the operation of the BTS. Position the RGPShead to have an unobstructed view of the sky and to minimize the chance of debris (leaves, dirt,etc ) accumulating on the radome of the RGPS head Place the RGPS head as far away from theetc.) accumulating on the radome of the RGPS head. Place the RGPS head as far away from theBTS transmit antenna as possible to avoid RF interference issues.Do not install the RGPS head close to a lightning rod. A lightning rod attracts lightning, whichcan damage or destroy the RGPS head. Also, since a lightning rod is connected to an earthground, it can act as a shield and create a shadow that may block or reduce the signal from asatellite.n WARNINGThe structure of the wall should be verified by a qualified structural engineer.Mounting the RGPS head and hardware to an inadequate wall structure and/or using inadequateinstallment methods can result in serious personal injury.2Use the appropriate mounting bolts for the mounting surface and install the two wall mountingbrackets (shown in Figure 3-9).3Insert the RGPS Interface cable through the pipe so that the connector end is at the RGPS headmounting location. (See Figure 3-9).4Connect the 12–pin connector on the RGPS head to the 12–pin connector on the RGPS interfacecable. To secure the connection, tighten the spinning connector flange. Make sure to provideslack in the RGPS cable to allow future servicing. See Figure 3-9. . . . continued on next page3
Remote GPS Head Installation – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20003-22Table 3-11: Installing the RGPS HeadStep Action5! CAUTIONTo avoid binding the RGPS interface cable turn the pipe not the RGPS head while tighteningTo avoid binding the RGPS interface cable, turn the pipe, not the RGPS head, while tightening.Insert the pipe into the threaded neck on the RGPS head and hand tighten.6Place the assembly into the mounting brackets and secure with the two clamp brackets, U–boltsand nuts as shown in Figure 3-9.Figure 3-9: Installing the Remote GPS HeadWALL MOUNTINGBRACKETS (2)CLAMP BRACKETS (2)U–BOLTSCABLE TO SITE I/OINTERFACEREFER TO VIEW ACABLE TOSITE I/OINTERFACERGPS HEAD WITH12 PIN MALECONNECTORMATINGCONNECTORSRGPS INTERFACECABLE WITH 12 PINFEMALE CONNECTORON ONE END ANDUNTERMINATED WIREON OTHER ENDVIEW ARGPS HEAD(MOTOROLA PARTNUMBER 0186012H03)3
DEC 2000 SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYChapter 4: Preparing Site Cabling for Sites Equipped withCustomer–Supplied Site I/O InterfaceTable of ContentsCabling Overview 4-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Overview 4-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Configurations Supported 4-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cabling Installation Order 4-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cable Labels 4-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cable Descriptions 4-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cable Descriptions and Part Numbers 4-2. . . . . . . . . . . . . . . . . . . . . . . . . . Motorola Kits for Multi–Unit Installations 4-4. . . . . . . . . . . . . . . . . . . . . . Motorola Kits for RGPS Cabling 4-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Site Cabling for BTS With Customer–Supplied Site I/O Interface 4-8. . . . . . . . . . Preparing Site Cabling Scope of Work 4-8. . . . . . . . . . . . . . . . . . . . . . . . . Power, Ground, and Battery Cabling for Sites Equipped With Customer–Supplied Site I/O Interface 4-16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Objective 4-16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Other Grounding Considerations 4-16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Power Requirements and Configurations 4-16. . . . . . . . . . . . . . . . . . . . . . . Cables Needed 4-17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC Input Cable Information 4-17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DC Input Cable Information 4-18. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Antenna Cabling for Sites Equipped With Customer–Supplied Site I/O Interface 4-21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Objective 4-21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cable Labels 4-21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Equipment Needed 4-21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Antenna Cable Pin and Signal Information 4-21. . . . . . . . . . . . . . . . . . . . . . Procedure to Install Antenna Cabling for One Antenna 4-22. . . . . . . . . . . . Procedure to Install Antenna Cabling for Multi–Unit Configurations 4-22. Site I/O , Span Line, RGPS and Modem Cabling for Sites Equipped WithCustomer–Supplied Site I/O Interface 4-24. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Objective 4-24. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cable Labels 4-24. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tools and Equipment 4-24. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Site I/O Cabling 4-24. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Procedure to Install Site I/O Cable Between Site I/O Junction Box and Site I/O Interface 4-25. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pin and Signal Information for Site I/O Cabling 4-26. . . . . . . . . . . . . . . . . . Connecting Customer–Defined Inputs to the Site I/O Interface 4-28. . . . . . 4
Table of Contents – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 2000Connecting the RGPS Cable to the Site I/O Interface 4-29. . . . . . . . . . . . . . Connecting the Span Line Cable to the Site I/O Interface 4-29. . . . . . . . . . Connecting a Phone Line to the Site I/O Interface (Modem Support) 4-30. RGPS Cabling for Multi–BTS Configurations 4-31. . . . . . . . . . . . . . . . . . . . . . . . . Overview 4-31. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Background 4-31. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Required Equipment 4-31. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cable Diagram 4-32. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Procedure 4-32. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cable Connections 4-35. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Span Line Daisy Chain Cabling 4-36. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Objective 4-36. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Background 4-36. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cable Description 4-36. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Procedure 4-36. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cable Connections 4-38. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Cabling OverviewDEC 2000 4-1SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYOverviewThis chapter provides the procedures to prepare the BTS site cabling, butnot attach it to the unit. Chapter 6 shows the scope of work for unitcabling.You will connect cables to the site and route them to the BTS location.You will attach the cables to the unit in Chapter 6.Repeat cabling installation as necessary for each unit at the BTS.Cabling is one of the most noticeable aspects ofworkmanship. Straight runs and proper turns are critical fora positive evaluation of the work.NOTEConfigurations SupportedThis chapter supports cable installation for single carrier omniconfigurations and multi–carrier omni configurations. This chapter alsosupports cable installations for sites equipped with thecustomer–supplied Site I/O Interface. Chapter 5 supports installationsfor sites equipped with the optional Primary Surge Suppressor.Cabling Installation OrderTo install the cables, Motorola recommends that the followingprocedures be completed in the order shown:1. Earth ground cabling2. AC power cabling3. DC power cabling4. Battery cabling (optional)5. Antenna cabling6. Site I/O interface cabling7. RGPS/HSO cabling (optional)8. Span line daisy chain cabling (optional)Cable LabelsThe “Cable Descriptions and Part Numbers” in Table 4-1 provides cabledescriptions and part numbers. The labels used to designate the cables(A, B, C, etc.) are used throughout this manual.4
Cable DescriptionsPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20004-2Cable Descriptions and PartNumbersTable 4-1 gives the cable descriptions and part numbers for the cablesused to install the BTS. The following cables are necessary for sitesequipped with the customer–supplied Site I/O Interface and the PrimarySurge Suppressor.Table 4-1: Cable Descriptions and Part NumbersCable Qty. Part Number DescriptionA 1 3087701C02 Ground cable, 8 -AWG, insulated copper wire. Requires one ring lugconnector. Used for Primary Surge Suppressor Installation.B 1–4 3087701C01 Ground cable. Installed between Site I/O Junction Box and MountingBracket.C 1–8 CustomerSupplied Antenna cable, 50–Ohm coaxial terminated with at least one male,N–type connector.D 2–6 CustomerSupplied Antenna cable, terminated with 2 male N–type connectorsE 1* 3087707C03 MIB A cable (current, 2m; micro) (part of kit SGEN4068A,SGEN4067A and SGEN4061A)F 1* 3087707C04 MIB B cable (current, 2m) (part of kit SGEN4066A, SGEN4070Aand SGEN4068A)G 2* 3087707C05 MIB C cable (current, 2m) (part of kit SGEN4070A andSGEN4068A)H 1* 3087707C06 MIB A cable (long, 2m; pico) (part of kit SGEN4070A, SGEN4069Aand SGEN4063A)I 1* 3087707C07 MIB B cable (long, 5m) (part of kit SGEN4065A, SGEN4069A andSGEN4067A)J 2* 3087707C08 MIB C cable (long, 5m) (part of kit SGEN4069A and SGEN4067A)K 1* 3087707C09 MIB A cable (short, 1m; micro) (part of kit SGEN4062A)L 1* 3087707C10 MIB A cable (short 1m; pico) (part of kit SGEN4064A)M 1 3086039H11 RGPS cable, 125 ft.3086039H12 RGPS cable, 250 ft.3086039H13 RGPS cable, 500 ft.3086039H14 RGPS cable, 1000 ft.3086039H15 RGPS cable, 2000 ft.N 1 CustomerSupplied Span cable. 22–24 AWG solid copper twisted pair. . . . continued on next page4
Cable Descriptions – continuedDEC 2000 4-3SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYTable 4-1: Cable Descriptions and Part NumbersCable DescriptionPart NumberQty.O 1 CustomerSupplied Customer Input cable. 22–24 AWG solid copper twisted pair.P 1 3087416C19 SU cable, 105 mmQ N/A* 3088120C01 SU RF cable, long (part of kits SGEN4062A, SGEN4061A,SGEN4064A, SGEN4063A, SGEN4066A, SGEN4065A,SGEN4068A, SGEN4067A, SGEN4070A and SGEN4069A).R N/A* 3088120C02 SU RF cable, short (part of kits SGEN4066A and SGEN4065A)S 1–4 3087854C02 AC input power cable. 14 AWG. 5m. Designed for 120–240 VACpower input. Cable has Deutsch connector on both ends.T 1 CustomerSupplied AC Input power cable. 10–14 AWG, 90_C wire. Designed for120–240 VAC.U 1 3087854C04 DC input cable, 14 and 22 AWG, 5 m, is designed for 20 to 30 VDCpower input.V 1 CustomerSupplied Phone (Modem) cable. 22–24 AWG solid copper twisted pair.W 1–3 CustomerSupplied Span Line Daisy Chain cable.X 1–11 3086039H18 RGPS Synchronization cable (part of kit SGKN4351A).3086039H19 RGPS Synchronization cable (part of kit SGKN4352A).Y 1 CustomerSupplied Master Ground Cable, 6 -AWG, insulated copper wire. Used for bothPrimary Surge Suppressor and non–Primary Surge Suppressorinstallations.Z 1 3088116C01 Site I/O Cable Extender. Required for use in a BTS not equippedwith the Primary Surge Suppressor.*Quantity of cables depends upon system configuration. Refer to “Motorola Kits for Multi–UnitInstallations” for more information.4
Cable Descriptions – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20004-4Motorola Kits for Multi–UnitInstallationsTable 4-2 through Table 4-11 gives the Motorola Kit numbers, cabledescriptions and part numbers for the Motorola kits required to performa multi–unit installation. Several kits are available depending upon thecarrier installation.Table 4-2: Microcell Expansion Kit for Units 1 to 2 Short MIB A (Cubicle) – T448ALCable Qty. Motorola PartNumber Descriptionn/a 2 5882106P01 50 Ohm Antenna TerminatorA 1 3087701C02 Ground cable, 8 -AWG, insulated copper wire. Requires one ring lugconnector.K 1 3087707C09 MIB A cable (short, 1m; micro)Q 1 3088120C01 Long SU CableTable 4-3: Microcell Expansion Kit for Units 1 to 2 Long MIB A (Non–Cubicle) – T448AMCable Qty. Motorola PartNumber Descriptionn/a 2 5882106P01 50 Ohm Antenna TerminatorA 1 3087701C02 Ground cable, 8 -AWG, insulated copper wire. Requires one ring lugconnector.E 1 3087707C03 MIB A cable (current, 2m; micro)Q 1 3088120C01 Long SU CableTable 4-4: Picocell Expansion Kit for Units 1 to 2 Short MIB A (Cubicle) – T448ANCable Qty. Motorola PartNumber DescriptionA 1 3087701C02 Ground cable, 8 -AWG, insulated copper wire. Requires one ring lugconnector.L 1 3087707C10 MIB A cable (short 1m; pico)Q 1 3088120C01 Long SU CableTable 4-5: Picocell Expansion Kit for Units 1 to 2 Long MIB A (Non–Cubicle) – T448APCable Qty. Motorola PartNumber DescriptionA 1 3087701C02 Ground cable, 8 -AWG, insulated copper wire. Requires one ring lugconnector.H 1 3087707C06 MIB A cable (long, 2m; pico)Q 1 3088120C01 Long SU Cable4
Cable Descriptions – continuedDEC 2000 4-5SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYTable 4-6: Microcell/Picocell Expansion Kit for Units 2 to 3 Current 2m MIB B – T448ARCable Qty. Motorola PartNumber DescriptionA 1 3087701C02 Ground cable, 8 -AWG, insulated copper wire. Requires one ring lugconnector.F 1 3087707C04 MIB B cable (current, 2m)Q 2 3088120C01 Long SU CableR 2 3088120C02 Short SU RF Cablen/a 2 5688123C01 SU Splittern/a 2 8009573X06 Lightning arrestorTable 4-7: Microcell/Picocell Expansion Kit for Units 2 to 3 Long 5m MIB B – T448ASCable Qty. Motorola PartNumber DescriptionA 1 3087701C02 Ground cable, 8 -AWG, insulated copper wire. Requires one ring lugconnector.I 1 3087707C07 MIB B cable (long, 5m)Q 2 3088120C01 Long SU RF CableR 2 3088120C02 Short SU RF Cablen/a 2 5688123C01 SU Splittern/a 2 8009573X06 Lightning arrestorTable 4-8: Microcell/Picocell Expansion Kit for Units 3 to 4 Current 2m MIBs B and C – T448ATCable Qty. Motorola PartNumber DescriptionA 1 3087701C02 Ground cable, 8 -AWG, insulated copper wire. Requires one ring lugconnector.n/a 2 5882106P01 50 Ohm Antenna TerminatorE 1 3087707C03 MIB A cable (current, 2m; micro)F 1 3087707C04 MIB B cable (current, 2m)G 2 3087707C05 MIB C cable (current, 2m)Q 1 3088120C01 Long SU RF Cable4
Cable Descriptions – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20004-6Table 4-9: Microcell/Picocell Expansion Kit for Units 3 to 4 Longer 5M MIBs B and C – T448AUCable Qty. Motorola PartNumber Descriptionn/a 2 5882106P01 50 Ohm Antenna TerminatorA 1 3087701C02 Ground cable, 8 -AWG, insulated copper wire. Requires one ring lugconnector.E 1 3087707C03 MIB A cable (current, 2m; micro)I 1 3087707C07 MIB B cable (long, 5m)J 2 3087707C08 MIB C cable (long, 5m)Q 1 3088120C01 Long SU RF CableTable 4-10: Picocell Expansion Kit for Units 3 to 4 Current 2M MIBs B and C – T448AVCable Qty. Motorola PartNumber Descriptionn/a 2 5882106P01 50 Ohm Antenna TerminatorA 1 3087701C02 Ground cable, 8 -AWG, insulated copper wire. Requires one ring lugconnector.E 1 3087707C03 MIB A cable (current, 2m; micro)F 1 3087707C04 MIB B cable (long, 2m)G 2 3087707C05 MIB C cable (long, 2m)Q 1 3088120C01 Long SU RF CableTable 4-11: Picocell Expansion Kit for Units 3 to 4 Longer 5M MIBs B and C – T448AWCable Qty. Motorola PartNumber DescriptionA 1 3087701C02 Ground cable, 8 -AWG, insulated copper wire. Requires one ring lugconnector.H 1 3087707C06 MIB A cable (long, 2m; pico)I 1 3087707C07 MIB B cable (long, 5m)J 2 3087707C08 MIB C cable (long, 5m)Q 1 3088120C01 Long SU RF Cable4
Cable Descriptions – continuedDEC 2000 4-7SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYMotorola Kits for RGPSCablingTable 4-12 and Table 4-13 show the contents of Motorola kitsSGKN4351A and SGKN4352A. These kits are necessary for RGPScabling between multiple BTS locations.Table 4-12: RGPS Synchronization Cable Kit – SGKN4351ACable Qty. Motorola PartNumber DescriptionX 1 3086039H18 RGPS Sync Cable, 2000 ft.n/a 2 5864461A03 Fitting, liquid tight.n/a 2 0264599A02 Nut, nylon lockingTable 4-13: RGPS Synchronization Cable Kit – SGKN4352ACable Qty. Motorola PartNumber DescriptionX 1 3086039H19 RGPS Sync Cable, 3280 ft.n/a 2 5864461A03 Fitting, liquid tight.n/a 2 0264599A02 Nut, nylon locking4
Site Cabling for BTS With Customer–Supplied Site I/O InterfacePRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20004-8Preparing Site Cabling Scopeof WorkFigure 4-1 through Figure 4-8 shows the scope of work to be performedfor preparing the site cabling with the customer–supplied Site I/OInterface. Chapter 6 shows the scope of work for unit cabling.Figure 4-1: Site Cabling for One MicrocellMICROCELL 1CUSTOMERINPUTSSPANRGPSSITE I/OINTERFACE PHONE(MODEM)LALADSULAAC POWERLAANT BTX/RXLADC POWERGROUNDKEYB/1(ANTENNA)LABELNUMBEROF CABLESNAMEY/1(GROUND)C/1(ANTENNA)S/1(AC POWER)U/1(DC POWER)LEGENDLA = Lightning ArrestorZ/1 (SITE I/O CABLE)SEE NOTE 1P/1 (SU)M/1 (RGPS)N/1 (SPAN)O/1 (CUSTOMERINPUT)V/1 (PHONE)LAC/1(ANTENNA) ANT ARXNOTES:1. If BTS is not equipped with the primary surgesuppressor, then you will require the Site I/O CableExtender Cable, p/n 3088116C01 (cable Q).2. The AC Installation Box is required for outdoorapplications.B/1 (GROUND)AC INSTALLBOX(SEE NOTE 2)4
Site Cabling for BTS With Customer–Supplied Site I/O Interface – continuedDEC 2000 4-9SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYFigure 4-2: Site Cabling for Two MicrocellsMICROCELL 1CUSTOMERINPUTSSPANRGPSSITE I/OINTERFACE PHONE(MODEM)LALADSULAMICROCELL 2 ANT 2TX/RXLADC POWERGROUNDANT 1TX/RXLADC POWERGROUNDKEYB/1(ANTENNA)LABELNUMBEROF CABLESNAMEY/1(GROUND)Y/1(GROUND)D/1(ANTENNA)D/1(ANTENNA)U/1(DC POWER)U/1(DC POWER)LEGENDLA = Lightning ArrestorNOTES1: Site I/O junction box and associated cable arepresent on Microcell 1 only.2. If BTS is not equipped with the primary surgesuppressor, then you will require the Site I/O CableExtender Cable, p/n 3088116C01 (cable Z).3. The AC Installation Box is required for outdoorapplications.E/1 (MIB) ORK/1 (MIB)Q/1 (SU)P/1 (SU)M/1 (RGPS)N/1 (SPAN)O/1 (CUSTOMERINPUT)V/1 (PHONE)Z/1 (SITE I/OCABLE) SEENOTES 1AND 2B/1 (GROUND)AC POWERLAS/1(AC POWER) AC INSTALLBOX(SEE NOTE 3)AC POWERLAS/1(AC POWER) AC INSTALLBOX(SEE NOTE 3)4
Site Cabling for BTS With Customer–Supplied Site I/O Interface – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20004-10Figure 4-3: Site Cabling for Three MicrocellsMICROCELL 3 MICROCELL 1CUSTOMERINPUTSSPANRGPSSITE I/OINTERFACE PHONE(MODEM)LALADSULAMICROCELL 2ANT 4TX/RXLAGROUNDDC POWERANT 2TX/RXLADC POWERGROUNDANT 1TX/RXLADC POWERGROUND2X2XKEYB/1(ANTENNA)LABELNUMBEROF CABLESNAMEY/1(GROUND)Y/1(GROUND)Y/1(GROUND)D/1(ANTENNA)D/1(ANTENNA)D/1(ANTENNA)U/1(DC POWER)U/1(DC POWER)U/1(DC POWER)Q/1 (SU)LEGENDLA = Lightning Arrestor2X = SU Splitter/CombinerQ/1 (SU)F/1 (MIB) ORI/1 (MIB)E/1 (MIB) ORK/1 (MIB) ORR/1 (SU)Q/1 (SU)LAD/1(ANTENNA) ANT 3RXR/1 (SU) M/1 (RGPS)N/1 (SPAN)O/1 (CUSTOMERINPUTS)V/1 (PHONE)Z/1 (SITE I/OCABLE) SEENOTES 1 AND 2B/1(GROUND)NOTES1: Site I/O junction box and associated cable arepresent on Microcell 1 only.2. If BTS is not equipped with the primary surgesuppressor, then you will require the Site I/O CableExtender Cable, p/n 3088116C01 (cable Z).3. The AC Installation Box is required for outdoorapplications.AC POWERLAS/1(AC POWER) AC INSTALLBOX(SEE NOTE 3)AC POWERLAS/1(AC POWER) AC INSTALLBOX(SEE NOTE 3)AC POWERLAS/1(AC POWER) AC INSTALLBOX(SEE NOTE 3)4
Site Cabling for BTS With Customer–Supplied Site I/O Interface – continuedDEC 2000 4-11SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYFigure 4-4: Site Cabling for Four MicrocellsMICROCELL 4 MICROCELL 1MICROCELL 3CUSTOMERINPUTSSPANRGPSSITE I/OINTERFACE PHONE(MODEM)LALADSULAMICROCELL 2ANT 4TX/RXLAGROUNDDC POWERANT 3TX/RXLADC POWERGROUND ANT 2TX/RXLADC POWERGROUNDANT 1TX/RXLADC POWERGROUND2X2XKEYB/1(ANTENNA)LABELNUMBEROF CABLESNAMEY/1(GROUND)Y/1(GROUND)Y/1(GROUND)Y/1(GROUND)D/1(ANTENNA)D/1(ANTENNA)D/1(ANTENNA)D/1(ANTENNA)U/1(DC POWER)U/1(DC POWER)U/1(DC POWER)U/1(DC POWER)Q/1 (SU)LEGENDLA = Lightning Arrestor2X = SU Splitter/CombinerQ/1 (SU)Q/1 (SU)G/1 (MIB) ORJ/1 (MIB)R/1 (SU)R/1 (SU)Q/1 (SU)M/1 (RGPS)W/1 (SPAN)O/1 (CUSTOMERINPUTS)V/1 (PHONE)Z/1 (SITE I/OCABLE) SEENOTEB/1(GROUND)NOTES1: Site I/O junction box and associated cable arepresent on Microcell 1 only.2. If BTS is not equipped with the primary surgesuppressor, then you will require the Site I/O CableExtender Cable, p/n 3088116C01 (cable Z).3. The AC Installation Box is required for outdoorapplications.AC POWERLAS/1(AC POWER) AC INSTALLBOX(SEE NOTE 3)AC POWERLAS/1(AC POWER) AC INSTALLBOX(SEE NOTE 3)AC POWERLAS/1(AC POWER) AC INSTALLBOX(SEE NOTE 3)AC POWERLAS/1(AC POWER) AC INSTALLBOX(SEE NOTE 3)F/1 (MIB) ORI/1 (MIB)E/1 (MIB) ORK/1 (MIB) ORE/1 (MIB) ORK/1 (MIB) OR4
Site Cabling for BTS With Customer–Supplied Site I/O Interface – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20004-12Figure 4-5: Site Cabling for One PicocellPICOCELL 1CUSTOMERINPUTSSPANRGPSSITE I/OINTERFACE PHONE(MODEM)LALADSULAANT ATX/RXLADC POWERGROUNDKEYB/1(ANTENNA)LABELNUMBEROF CABLESNAMEY/1(GROUND)D/1(ANTENNA)U/1(DC POWER)LEGENDLA = Lightning ArrestorP/1 (SU) M/1 (RGPS)N/1 (SPAN)O/1 (CUSTOMERINPUT)V/1 (PHONE)NOTES:1. If BTS is not equipped with the primary surgesuppressor, then you will require the Site I/O CableExtender, p/n 3088116C01 (cable Z).2. The AC Installation Box is required for outdoorapplications.Z/1 (SITE I/O CABLE)SEE NOTEB/1 (GROUND)AC POWERLAS/1(AC POWER) AC INSTALLBOX(SEE NOTE 2)4
Site Cabling for BTS With Customer–Supplied Site I/O Interface – continuedDEC 2000 4-13SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYFigure 4-6: Site Cabling for Two PicocellsPICOCELL 1CUSTOMERINPUTSSPANRGPSSITE I/OINTERFACE PHONE(MODEM)LALADSULAPICOCELL 2 ANT 2TX/RXLADC POWERGROUNDANT 1TX/RXLADC POWERGROUNDKEYB/1(ANTENNA)LABELNUMBEROF CABLESNAMEY/1(GROUND)Y/1(GROUND)D/1(ANTENNA)D/1(ANTENNA)U/1(DC POWER)U/1(DC POWER)LEGENDLA = Lightning Arrestor2X = SU Splitter/Combiner Q/1 (SU)M/1 (RGPS)N/1 (SPAN)O/1 (CUSTOMERINPUTS)V/1 (PHONE)Z/1 (SITE I/OCABLE) SEENOTEB/1 (GROUND)NOTES1: Site I/O junction box and associated cable arepresent on Microcell 1 only.2. If BTS is not equipped with the primary surgesuppressor, then you will require the Site I/O CableExtender Cable, p/n 3088116C01 (cable Z).3. The AC Installation Box is required for outdoorapplications.H/1 (MIB) ORL/1 (MIB) ORAC POWERLAS/1(AC POWER) AC INSTALLBOX(SEE NOTE 3)AC POWERLAS/1(AC POWER) AC INSTALLBOX(SEE NOTE 3)4
Site Cabling for BTS With Customer–Supplied Site I/O Interface – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20004-14Figure 4-7: Site Cabling for Three PicocellsPICOCELL 3 PICOCELL 1CUSTOMERINPUTSSPANRGPSSITE I/OINTERFACE PHONE(MODEM)LALADSULAPICOCELL 2ANT 4TX/RXLAGROUNDDC POWERANT 2TX/RXLADC POWERGROUNDANT 1TX/RXLADC POWERGROUND2X2XKEYB/1(ANTENNA)LABELNUMBEROF CABLESNAMEY/1(GROUND)Y/1(GROUND)Y/1(GROUND)D/1(ANTENNA)D/1(ANTENNA)D/1(ANTENNA)U/1(DC POWER)U/1(DC POWER)U/1(DC POWER)Q/1 SULEGENDLA = Lightning Arrestor2X =SU Splitter/CombinerQ/1 (SU)F/1 (MIB) ORI/1 (MIB)R/1 (SU)R/1 (SU)Q/1 (SU)Z/1 (SITE I/OCABLE) SEENOTEB/1(GROUND)M/1 (RGPS)N/1 (SPAN)O/1 (CUSTOMERINPUTS)V/1 (PHONE)NOTES1: Site I/O junction box and associated cable arepresent on Microcell 1 only.2. If BTS is not equipped with the primary surgesuppressor, then you will require the Site I/O CableExtender Cable, p/n 3088116C01 (cable Z).3. The AC Installation Box is required for outdoorapplications.AC POWERLAS/1(AC POWER) AC INSTALLBOX(SEE NOTE 3)H/1 (MIB) ORL/1 (MIB) ORAC POWERLAS/1(AC POWER) AC INSTALLBOX(SEE NOTE 3)AC POWERLAS/1(AC POWER) AC INSTALLBOX(SEE NOTE 3)4
Site Cabling for BTS With Customer–Supplied Site I/O Interface – continuedDEC 2000 4-15SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYFigure 4-8: Site Cabling for Four PicocellsPICOCELL 4 PICOCELL 1PICOCELL 3CUSTOMERINPUTSSPANRGPSSITE I/OINTERFACE PHONE(MODEM)LALADSULAPICOCELL 2ANT 4TX/RXLAGROUNDDC POWERANT 3TX/RXLADC POWERGROUNDANT 2TX/RXLADC POWERGROUNDANT 1TX/RXLADC POWERGROUND2X2XKEYB/1(ANTENNA)LABELNUMBEROF CABLESNAMEY/1(GROUND)Y/1(GROUND)Y/1(GROUND)Y/1(GROUND)D/1(ANTENNA)D/1(ANTENNA)D/1(ANTENNA)D/1(ANTENNA)U/1(DC POWER) U/1(DC POWER)U/1(DC POWER)U/1(DC POWER)Q/1 SULEGENDLA = Lightning Arrestor2X = SU Splitter/CombinerQ/1 (SU)Q/1 (SU)F/1 (MIB) ORI/1 (MIB)R/1 (SU)Q/1 (SU)R/1 (SU) M/1 (RGPS)W/1 (SPAN)O/1 (CUSTOMERINPUTS)V/1 (PHONE)Z/1 (SITE I/OCABLE) SEENOTEB/1(GROUND)NOTES1: Site I/O junction box and associated cable arepresent on Microcell 1 only.2. If BTS is not equipped with the primary surgesuppressor, then you will require the Site I/O CableExtender Cable, p/n 3088116C01 (cable Z).3. The AC Installation Box is required for outdoorapplications.H/1 (MIB) ORL/1 (MIB) ORG/1 (MIB) ORJ/1 (MIB)AC POWERLAS/1(AC POWER) AC INSTALLBOX(SEE NOTE 3)AC POWERLAS/1(AC POWER) AC INSTALLBOX(SEE NOTE 3)AC POWERLAS/1(AC POWER) AC INSTALLBOX(SEE NOTE 3)AC POWERLAS/1(AC POWER) AC INSTALLBOX(SEE NOTE 3)4
Power, Ground, and Battery Cabling for Sites Equipped WithCustomer–Supplied Site I/O InterfacePRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20004-16ObjectiveThe objective of this procedure is to install the power, earth ground, andbattery cabling for one or more Microcell or Picocell units at a siteequipped with customer–supplied Site I/O Interface.Dangerous voltages, capable of causing death, are presentin this equipment. Use extreme caution when handling andtesting this equipment.WARNINGIf you are installing the unit outdoors and are not using thePrimary Surge Suppressor, then you must connect ACpower with the AC Installation Box. The AC InstallationBox is included with the non–surge option.NOTEOther GroundingConsiderationsThis procedure covers only the grounding information for the cables thatattach to one or more MicroCell or PicoCell units. Groundingconsiderations beyond the ground cables that attach to the MicroCell aresummarized in Appendix A. Refer to Appendix A and the sitedocumentation for other grounding considerations.Power Requirements andConfigurationsThe power requirements for the unit are: 120–240 VAC or 20–30 VDCpower input.The AC Installation Box is required for all outdoor installations whichuse the customer–supplied Site I/O interface.The power and battery configurations for the MicroCell and PicoCellunits are:SAC power only (no battery)SAC power with short duration batterySDC powerNeither the ”+” or ”–” terminal of the DC Input isconnected to the BTS ground. If a negative supply input isprovided, the ”+” terminal of the DC input must beconnected to the Master Ground Plate (MGP). Byconnecting the ”+” terminal of the DC input to the MGP, anegative supply system is created.NOTE4
Power, Ground, and Battery Cabling for Sites Equipped WithCustomer–Supplied Site I/O Interface – continuedDEC 2000 4-17SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYCables NeededTable 4-14 provides the quantity and description of the cables needed.Table 4-14: Cables Needed for Power, Earth Ground, and Battery ConnectionsCable Qty. Part Number DescriptionS 1–4 3087854C02 AC input cable, 14 AWG, 5 m, is designed for 88–260 VAC powerinput.U 1–4 3087854C04 DC input cable, 14 and 22 AWG, 5 m, is designed for 20 to 40 VDCpower input.Y 1–4 CustomerSupplied Ground cable, 6 -AWG, insulated copper wire. Requires one ring lugconnectors.AC Input Cable InformationThe pinout information for the AC input cable(s) (Cable S) is given inFigure 4-9 and Table 4-15.Figure 4-9: AC Input Cable Connector InformationABCSOCKET POSITION ON CABLECONNECTOR SHOWNTable 4-15: AC Input Cable InformationConnector Wire Color DescriptionA Black LineB Green GroundC White Neutral4
Power, Ground, and Battery Cabling for Sites Equipped WithCustomer–Supplied Site I/O Interface – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20004-18DC Input Cable InformationThe information for the DC input cable(s) (Cable U) is given inFigure 4-10.Figure 4-10: DC Input Cable Connector InformationABCDSOCKET POSITION ONCABLE CONNECTOR SHOWNTable 4-16: DC Input Cable InformationConnector WireColor Description CommentsA Yellow Switch A No connectionB Red Positive Connect to positiveterminal of supply.C Blue Switch B Connect to negativeterminal of supply.D Black Negative Connect to negativeterminal of supply.ProcedureThe system configuration determines which power cables are installed.The ground cable is always installed. Based on the system configurationperform the appropriate procedures from the following tables.Table 4-17: Procedure to Install Earth Ground CableStep Action1Route cable Y (ground cable) from the ground on themounting bracket to the customer defined grounding location.2Connect cable Y to the customer defined master ground plate.4
Power, Ground, and Battery Cabling for Sites Equipped WithCustomer–Supplied Site I/O Interface – continuedDEC 2000 4-19SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYTable 4-18: Procedure to Install AC Input Cable(s) (IndoorApplications)Step Action1If you will not use the AC Installation box, remove the maleconnector (with pins) from the AC input power cable (cableS).2Connect the loose wires of cable S (AC input cable) to thecustomer defined AC power source. Refer to Table 4-15 forwiring information.3Verify all connections of cable S with an ohmmeter prior torouting the cable.4Route cable S from the AC power supply to the unit location.Table 4-19: Procedure to Install AC Installation Box (Optional –Required for Outdoor Installations)Step Action1Route the AC Power Cable (cable T) through 1–in. conduitfrom the customer–defined AC power source to the ACInstallation box. Refer to Figure 4-11 and Table 4-20.2Attach cable T to the connector on the AC Installation Boxand route cable T to unit location.Table 4-20: AC Installation Box CablingPunchdown BlockConnector AC Power CableWire Color Description1 Black Line*2 White Neutral*3 Green Ground***The line and neutral connections can accept 10–14 AWG cable.**The Ground connection can accept 14–6 AWG cable.Refer to the “Cable Descriptions and Part Numbers” table in Chapter4 for more information.4
Power, Ground, and Battery Cabling for Sites Equipped WithCustomer–Supplied Site I/O Interface – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20004-20Figure 4-11: AC Installation Box132AC POWER CABLECONNECTORGREENWHITEBLACKTO GROUNDCONNECTOR ON INSIDEOF DOORNOTE: Shown with door removed for clarity1–IN ACCONDUITTO MICROCELL/PICOCELL LOCATION GROUNDNEUTRALLINE CUSTOMERAC INPUTTable 4-21: Procedure to Install DC Input Cable(s)Step Action1Connect the loose wires of cable U (DC input cable) to thecustomer defined DC power source. Refer to NO TAG forwiring information.2Verify all connections of cable U with an multimeter prior torouting the cable.3Route cable U from the DC power supply to the unit location.4
Antenna Cabling for Sites Equipped With Customer–Supplied Site I/OInterfaceDEC 2000 4-21SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYObjectiveThe objective of this procedure is to install the cabling for theantenna(s). This cabling is installed between one or more units and thecustomer–supplied lightning arrestor(s).Cable LabelsThe cable designations are referenced to Table 4-1 in the “CableDescription” area of this chapter.Equipment NeededTable 4-22 provides the quantities and descriptions of the cables.Table 4-22: Cables Needed for Antenna ConnectionsCable Qty. Part Number DescriptionC1 to 8 Customer Supplied Antenna cable, 50–Ohm coaxial terminated with at least one male,N–type connector.Antenna Cable Pin and SignalInformationThe antenna cabling uses a 50–Ohm coaxial cable. The inner conductorprovides signaling and the outer conductor provides shielding andground.Figure 4-12: Antenna Cabling DetailsOUTERCONDUCTORINNERCONDUCTORANTENNA CABLE (COAXIAL)CONNECTORTable 4-23: Pin and Signal Information for Cable C (Antenna Cable)Antenna Inner Conductor OuterConductorB (Microcell only) TX/RX GroundARX (Microcell)TX/RX (Picocell) Ground4
Antenna Cabling for Sites Equipped With Customer–Supplied Site I/OInterface – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20004-22Procedure to Install AntennaCabling for One AntennaYou must install lightning arrestors for all outdoorinstallations.IMPORTANT*Route the antenna cable between the unit and the customer–suppliedlightning arrestor. If a lighting arrestor is not required, route the cablingdirectly to the antenna. Refer to Figure 4-12 and Table 4-23.Procedure to Install AntennaCabling for Multi–UnitConfigurationsIf your site has more than one Microcell or Picocell unit, refer toFigure 4-13 or Figure 4-14 for site cabling information. Route theantenna cables between the units and the customer–supplied lightningarrestors. If lighting arrestors are not required, route the cabling directlyto the antennas.Figure 4-13: Antenna Cabling for Three MicrocellsMICROCELL 3 MICROCELL 1MICROCELL 2ANT 4TX/RXLAANT 3RXLAANT 2TX/RXLAANT 1TX/RXLAKEYB/1(ANTENNA)LABELNUMBEROF CABLESNAMEC/1(ANTENNA)C/1(ANTENNA)C/1(ANTENNA)C/1(ANTENNA)LA =LIGHTNINGARRESTOR4
Antenna Cabling for Sites Equipped With Customer–Supplied Site I/OJunction Box – continuedDEC 2000 4-23SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYFigure 4-14: Antenna Cabling for Maximum of Four Microcells or PicocellsMICROCELL/PICOCELL 4MICROCELL/PICOCELL 1MICROCELL/PICOCELL 3 MICROCELL/PICOCELL 2ANT 4TX/RXLAANT 3TX/RXLA ANT 2TX/RXLAANT 1TX/RXLAKEYB/1(ANTENNA)LABELNUMBEROF CABLESNAMEC/1(ANTENNA) C/1(ANTENNA)C/1(ANTENNA)C/1(ANTENNA)LA =LIGHTNINGARRESTOR4
Site I/O , Span Line, RGPS and Modem Cabling for Sites Equipped WithCustomer–Supplied Site I/O InterfacePRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20004-24ObjectiveThe objective of this procedure is to install the Site I/O cable betweenthe Site I/O junction box and the customer–supplied Site I/O interface.This procedure also covers the installation of the site cabling of the spanline, RGPS and modem cabling to the site I/O interface.If your multi–unit BTS is equipped with the optional Primary SurgeSuppressor, refer to the “Primary Surge Suppressor Cabling” proceduresin chapter 5.Cable LabelsThe cable designations are referenced to Table 4-1 in the “CableDescription” area of this chapter.Tools and EquipmentTable 4-24 provides the quantities and descriptions of the cables.Table 4-24: Cables Needed for Antenna ConnectionsCable Qty. Part Number DescriptionM 1 3086039H11 RGPS cable, 125 ft.3086039H12 RGPS cable, 250 ft.3086039H13 RGPS cable, 500 ft.3086039H14 RGPS cable, 1000 ft.3086039H15 RGPS cable, 2000 ft.N 1 Customer Supplied Span Cable. 22–24 AWG solid copper twisted pair.O 1 Customer Supplied Customer Input Cable. 22–24 AWG solid copper twisted pair.V 1 Customer Supplied Phone (Modem) Cable. 22–24 AWG solid copper twisted pair.Z 1 3088116C01 Site I/O Extender Cable. Required for use in a BTS not equippedwith the Primary Surge Suppressor.Site I/O CablingThe Site I/O interface and cabling are customer–supplied. The cablebetween the Site I/O junction box and the Site I/O interface is part of theSite I/O junction box and is supplied by Motorola. If your BTS uses thecustomer–supplied Site I/O Interface instead of the Primary SurgeSuppressor, then you will need to use the Site I/O Extender Cable (CableZ). The Site I/O Extender cable is included with this option.The customer determines the Site I/O interface configuration. The endresult is the correct signals getting to the correct pins on the Site I/Ocable.4
Site I/O , Span Line, RGPS and Modem Cabling for Sites Equipped WithCustomer–Supplied Site I/O Interface – continuedDEC 2000 4-25SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYProcedure to Install Site I/OCable Between Site I/OJunction Box and Site I/OInterface Route the Site I/O junction box cable from the unit location(s) to the SiteI/O Extender Cable (cable Z). Route cable Z to the Site I/O interface.Connect the appropriate connectors within the Site I/O interface. Referto Figure 4-15 and Table 4-25.If lightning arrestors are required, they must be customer–supplied.Lightning arrestors are not necessary for sites equipped with optionalPrimary Surge Suppressor.Figure 4-15: Site I/O Cabling Details (MicroCell Unit Shown)CUSTOMERINPUTSSPANRGPSPHONE(MODEM)SITE I/OINTERFACESITE I/OJUNCTION BOXSITE I/OCABLEMNOVZDEUTSCHCONNECTOR4
Site I/O , Span Line, RGPS and Modem Cabling for Sites Equipped WithCustomer–Supplied Site I/O Interface – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20004-26 Pin and Signal Information forSite I/O CablingTable 4-25 gives the pin and signal information for the Site I/O cable.Table 4-25: Pin/Signal Information for Site I/O CableBTS Interface Wire/StripeColor DescriptionBlack Customer Input 1 SignalBrown Customer Input 1 GroundRed Customer Input 2 SignalOrange Customer Input 2 GroundYellow Customer Input 3 SignalGreen Customer Input 3 GroundBlue Customer Input 4 SignalCustomer InputPurple Customer Input 4 GroundCustomer Input Grey Customer Input 5 SignalWhite Customer Input 5 GroundBlack/Brown Customer Input 6 SignalBlack/Red Customer Input 6 GroundBlack/Orange Customer Input 7 SignalBlack/Yellow Customer Input 7 GroundBlack/Green Customer Input 8 SignalBlack/Blue Customer Input 8 GroundBlack/Purple Data to Tail –Black/Grey Data to Tail +Black/White Data from Tail –Brown/Black Data from Tail +Sync ReverseBrown/Red 1 PPS to Tail –Sync Reverse Brown/Orange 1 PPS to Tail +Brown/Yellow 1 PPS from Tail –Brown/Green 1 PPS from Tail +Brown/Blue Downstream BTS Detect +Brown/Purple Downstream BTS Detect – . . . continued on next page4
Site I/O , Span Line, RGPS and Modem Cabling for Sites Equipped WithCustomer–Supplied Site I/O Interface – continuedDEC 2000 4-27SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYTable 4-25: Pin/Signal Information for Site I/O CableBTS Interface DescriptionWire/StripeColorBrown/Grey Data from Head –Brown/White Data from Head +Red/Black Data to Head –Red/Brown Data to Head +Red/Orange 1 PPS from Head –Red/Yellow 1 PPS from Head +Red/Green 1 PPS to Head –Sync ForwardRed/Blue 1 PPS to Head +Sync ForwardRed/Purple RGPS 28VRed/Grey RGPS GroundRed/White RGPS 28VOrange/Black RGPS GroundOrange/Brown RGPS 28VOrange/Red RGPS GroundOrange/Yellow NO CONNECTIONOrange/Green NO CONNECTIONOrange/Blue RX TIP Primary (Network)Orange/Purple RX RING Primary (Network)Orange/Grey TX TIP Primary (Network)Span (Network)Orange/White TX RING Primary (Network)Span (Network)Yellow/Black RX TIP Secondary (Network)Yellow/Brown RX RING Secondary (Network)Yellow/Red TX TIP Secondary (Network)Yellow/Orange TX RING Secondary (Network) . . . continued on next page4
Site I/O , Span Line, RGPS and Modem Cabling for Sites Equipped WithCustomer–Supplied Site I/O Interface – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20004-28Table 4-25: Pin/Signal Information for Site I/O CableBTS Interface DescriptionWire/StripeColorYellow/Green RX TIP Primary (Redundant)Yellow/Blue RX RING Primary (Redundant)Yellow/Purple TX TIP Primary (Redundant)Span (Redundant)Yellow/Grey TX RING Primary (Redundant)Span (Redundant)Yellow/White RX TIP Secondary (Redundant)Green/Black RX RING Secondary (Redundant)Green/Brown TX TIP Secondary (Redundant)Green/Red TX RING Secondary (Redundant)Green/Orange MODEM TIPGreen/Yellow MODEM TIPPhone (Modem)Green/Blue No connectionPhone (Modem)Green/Purple No connectionGreen/Grey MODEM RINGGreen/White MODEM RINGConnecting Customer–DefinedInputs to the Site I/O InterfaceThe unit provides eight customer–defined inputs for connection toexternal contacts. Each input (a signal/ground pair) is monitored for an“OPEN” (>50 k Ohms) or “CLOSED” (<3 Ohms) condition.4
Site I/O , Span Line, RGPS and Modem Cabling for Sites Equipped WithCustomer–Supplied Site I/O Interface – continuedDEC 2000 4-29SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYConnecting the RGPS Cable tothe Site I/O InterfaceThe RGPS (cable M) is connected to the Site I/O interface (SyncForward) of the BTS. Table 4-26 provides the Sync Forward to RGPSconnections.Table 4-26: Connecting the RGPS to the Site I/O CableSite I/O Cable RGPS (Cable M)Sync ForwardDescriptions Sync ForwardColor Code(wire/stripe)RGPS Description RGPS Color Code(wire/stripe)Data from Head – Brown/Grey Transmit Port – Green/BlackData from Head + Brown/White Transmit Port + GreenData to Head – Red/Black Receive Port – White/BlackData to Head + Red/Brown Receive Port + White1 pps from Head – Red/Orange 1 PPS Timing – Brown/Black1 pps from Head + Red/Yellow 1 PPS Timing + BrownRGPS 28 V Red/Purple Power 1 BlueRed/WhiteOrange/Brown Power 2 YellowOrange/YellowRGPS Ground Red/Grey DC Ground 1 Blue/BlackOrange/BlackOrange/Red DC Ground 2 Yellow/BlackOrange/GreenNOTEThe RGPS must also be ground referenced to the BTS “digital” ground. This is done byconnecting the Red/Grey lead (RGPS Ground) from the Sync Forward Interface to theBlack/Blue lead (Customer Input 8 Ground) from the Customer Input interface.Connecting the Span LineCable to the Site I/O InterfaceThe unit provides two, four–wire JT1 interfaces for backhaul support.Each interface is made up of Transmit Tip/Ring and Receive Tip/Ringconnections.The Transmit and Receive data flow is given from the perspective of theunit. Only a single span line (Primary) is required for BTS operation.4
Site I/O , Span Line, RGPS and Modem Cabling for Sites Equipped WithCustomer–Supplied Site I/O Interface – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20004-30Connecting a Phone Line to theSite I/O Interface (ModemSupport)The unit provides a two–wire analog phone line interface for modemsupport. The unit Tip and Ring signals are connected to the externalphone line Tip and Ring.4
RGPS Cabling for Multi–BTS ConfigurationsDEC 2000 4-31SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYOverviewThis procedure gives information to connect multiple units for bothRGPS (synchronous) and HSO (non–synchronous) configurations.BackgroundThe RGPS only connects to the first unit of a multi–unit system. Thisfirst unit sends timing signals to all other units in a multi–unit system.You only need to connect the first units of each BTS to each other. Thisallows “sharing” of a single RGPS antenna between several single ormulti–unit BTSs.This also applies to systems using HSO instead of RGPS. The HSOtiming is “shared” in the same way.Required EquipmentCablesThe RGPS Synchronization Cable is contained in the Motorola kitslisted in Table 4-27:Table 4-27: Cable Descriptions and Part NumbersCable Qty. Part Number DescriptionX 1–11 3086039H18 RGPS Synchronization cable (part of kit SGKN4351A).3086039H19 RGPS Synchronization cable (part of kit SGKN4352A).Motorola kitsTable 4-28 and Table 4-29 show the contents of Motorola kitsSGKN4351A and SGKN4352A. These kits are necessary for RGPScabling between multiple BTS locations.Table 4-28: RGPS Synchronization Cable Kit – SGKN4351ACable Qty. Motorola PartNumber DescriptionX 1 3086039H18 RGPS Sync Cable, 2000 ft.n/a 2 5864461A03 Fitting, liquid tight.n/a 2 0264599A02 Nut, nylon lockingTable 4-29: RGPS Synchronization Cable Kit – SGKN4352ACable Qty. Motorola PartNumber DescriptionX 1 3086039H19 RGPS Sync Cable, 3280 ft.n/a 2 5864461A03 Fitting, liquid tight.n/a 2 0264599A02 Nut, nylon locking4
RGPS Cabling for Multi–BTS Configurations – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20004-32Cable DiagramFigure 4-16 and Figure 4-17 both show the cabling for multi–unitconfigurations for both RGPS (sychronous) and HSO(non–synchronous).ProcedureConnect the cables (Cable O) between the RGPS head (if used) and thesite I/O junction box of each BTS. Refer to the cable run list inTable 4-30, Figure 4-16 and Figure 4-17.4
RGPS Cabling for Multi–BTS Configurations – continuedDEC 2000 4-33SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYFigure 4-16: Site I/O Interface Cabling for RGPS (Synchronous) ConfigurationsCUSTOMERINPUTSSPANRGPSPHONE(MODEM)SITE I/OINTERFACESITE I/OCABLECUSTOMERINPUTSSPANPHONE(MODEM)SITE I/OCABLECUSTOMERINPUTSSPANPHONE(MODEM)SITE I/OCABLECUSTOMERINPUTSSPANPHONE(MODEM)SITE I/OCABLERGPS DAISY CHAIN CABLERGPS DAISY CHAIN CABLERGPS DAISY CHAIN CABLENOTE 1: EACH BTS MAY CONTAIN UP TOFOUR SC340 UNITS.NOTE 2: A MAXIMUM OF 12 BTS MAY BEINTERCONNECTED WITH A MAXIMUMDASIY CHAIN CABLE LENGTH OF 600MBETWEEN EACH BTS. A MAXIMUM OFSEVEN BTS MAY BE INTERCONNECTEDWITH A MAXIMUM DAISY CHAIN CABLELENGTH OF 1KM BETWEEN EACH BTS.MAXIMUMDISTANCE IS1 KM (SEENOTE 2)BTS 1 (SEE NOTE 1)BTS 3(SEE NOTE 1)BTS 4(SEE NOTE 1)UNIT 4 UNIT 3 UNIT 2 UNIT 1UNIT 3 UNIT 2 UNIT 1UNIT 2 UNIT 1UNIT 1XXXBTS 2(SEE NOTE 1)MAXIMUMDISTANCE IS1 KM (SEENOTE 2)MAXIMUMDISTANCE IS1 KM (SEENOTE 2)UPSTREAMUPSTREAMUPSTREAMDOWNSTREAMDOWNSTREAMDOWNSTREAMSITE I/OINTERFACESITE I/OINTERFACESITE I/OINTERFACE4
RGPS Cabling for Multi–BTS Configurations – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20004-34Figure 4-17: Site I/O Interface Cabling for HSO (Non–Synchronous) ConfigurationsCUSTOMERINPUTSSPANPHONE(MODEM)SITE I/OINTERFACESITE I/OCABLECUSTOMERINPUTSSPANPHONE(MODEM)SITE I/OCABLECUSTOMERINPUTSSPANPHONE(MODEM)SITE I/OCABLECUSTOMERINPUTSSPANPHONE(MODEM)SITE I/OCABLERGPS DAISY CHAIN CABLERGPS DAISY CHAIN CABLERGPS DAISY CHAIN CABLEMAXIMUMDISTANCE IS600M (SEENOTE 2BTS 1 (SEE NOTE 1)BTS 2(SEE NOTE 1)BTS 3(SEE NOTE 1)BTS 4(SEE NOTE 1)UNIT 4 UNIT 3 UNIT 2 UNIT 1UNIT 3 UNIT 2 UNIT 1UNIT 2 UNIT 1UNIT 1XXXMAXIMUMDISTANCE IS600M (SEENOTE 2MAXIMUMDISTANCE IS600M (SEENOTE 2DOWNSTREAMDOWNSTREAMDOWNSTREAMUPSTREAMUPSTREAMUPSTREAMNOTE 1: EACH BTS MAY CONTAIN UP TOFOUR SC340 UNITS.NOTE 2: A MAXIMUM OF 12 BTS MAY BEINTERCONNECTED WITH A MAXIMUMDASIY CHAIN CABLE LENGTH OF 600MBETWEEN EACH BTS. A MAXIMUM OFSEVEN BTS MAY BE INTERCONNECTEDWITH A MAXIMUM DAISY CHAIN CABLELENGTH OF 1KM BETWEEN EACH BTS.SITE I/OINTERFACESITE I/OINTERFACESITE I/OINTERFACE4
RGPS Cabling for Multi–BTS Configurations – continuedDEC 2000 4-35SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYCable ConnectionsFor a full signal description of the Site I/O cable, refer to NO TAG in the“Site I/O, Span Line, RGPS and Modem Cabling” procedure.The pin number and wire color are based on the Site I/Ocable. The pin number corresponds to pins on the Site I/Ojunction box connectors.NOTETable 4-30: Multi–BTS Cable Run ListSync Reverse – From BTS N InterconnectingCable Sync Forward – To BTS N+1Color Signal RGPS CableColor Color SignalBlack/Purple Data to Tail– Green/Black Brown/Grey Data from Head–Black/Grey Data to Tail+ Green Brown/White Data from Head+Black/White Data from Tail– White/Black Red/Black Data to Head–Brown/Black Data from Tail+ White Red/Brown Data to Head+Brown/Red 1 PPS to Tail– Brown/Black Red/Orange 1 PPS from Head–Brown/Orange 1 PPS to Tail+ Brown Red/Yellow 1 PPS from Head+Brown/Yellow 1 PPS from Tail– Red/Black Red/Green 1 PPS to Head–Brown/Green 1 PPS from Tail+ Red Red/Blue 1 PPS to Head+Black/Blue Ground* Blue/Black Black/Blue Ground**The Multi–BTS Synchronization interface must also be referenced to the BTS digital ground through a 7.5Kohm, 1W resistor. This resistor should be physically located at the punch block or terminal strip at each SyncReverse connection in series with the Black/Blue Ground wire.4
Span Line Daisy Chain CablingPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20004-36ObjectiveThe objective of this procedure is to install span line cabling betweenmultiple BTSs in an open daisy chain configuration.BackgroundThis feature allows BTSs to be linked together in an open daisy chainloop using a single T1/JT1/E1 span. This will reduce the number ofspans necessary to support a JCDMA system and minimize unusedchannels.Each BTS may contain up to four units. A maximum of 12 BTSs maybe combined in a single daisy chain.Cable DescriptionThe following cables are necessary to do this procedure.Table 4-31: Cable Descriptions and Part NumbersCable Qty. Part Number DescriptionN 1–3 CustomerSupplied Span Line Daisy Chain CableProcedureAttach the span line daisy chain cable (Cable N) to the site I/O interfacesof each BTS. Refer to Figure 4-18 and Table 4-32.4
Span Line Daisy Chain Cabling – continuedDEC 2000 4-37SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYFigure 4-18: Site I/O Interface Cabling for Span Line Daisy Chain CablingCUSTOMERINPUTSSPANRGPSPHONE(MODEM)SITE I/OINTERFACESITE I/OCABLECUSTOMERINPUTSSPANPHONE(MODEM)SITE I/OINTERFACESITE I/OCABLECUSTOMERINPUTSSPANPHONE(MODEM)SITE I/OINTERFACESITE I/OCABLECUSTOMERINPUTSSPANPHONE(MODEM)SITE I/OINTERFACESITE I/OCABLEBTS 1(SEE NOTE 1)SPAN LINE DAISYCHAIN CABLESPAN LINE DAISYCHAIN CABLESPAN LINE DAISYCHAIN CABLENOTE 1: EACH BTS SITE MAYCONTAIN UP TO FOUR SC340 UNITS.THERE MAY BE A TOTAL OF 12 BTSs INA DAISY CHAINNNNBTS 2(SEE NOTE 1)BTS 3(SEE NOTE 1)BTS 4(SEE NOTE 1)4
Span Line Daisy Chain Cabling – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20004-38Cable ConnectionsTable 4-32 shows the cable run information for span line daisy chaincabling.For a full signal description of the Site I/O cable refer to NO TAG in the“Site I/O, Span Line, RGPS and Modem Cabling” procedure.The pin number and wire color are based on the Site I/Ocable. The pin number corresponds to pins on the Site I/Ojunction box connectors.NOTETable 4-32: Cable Run List for Span Line Daisy Chain CablingBTS 1 (Secondary Backhaul) BTS 2 (Primary Backhaul)Color Description Color DescriptionYellow/Black RX TIP Orange/Grey TX TIPYellow/Brown RX RING Orange/White TX RINGYellow/Red TX TIP Orange/Blue RX TIPYellow/Orange TX RING Orange/Purple RX RING4
DEC 2000 SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYChapter 5: Preparing Site Cabling for Sites Equipped with Optional Primary Surge SuppressorTable of ContentsCabling Overview 5-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Overview 5-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Configurations Supported 5-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cabling Installation Order 5-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cable Labels 5-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Site Cabling for BTS With Optional Primary Surge Suppressor 5-2. . . . . . . . . . . . Preparing Site Cabling Scope of Work 5-2. . . . . . . . . . . . . . . . . . . . . . . . . Attaching Surge Suppressor to Mounting Bracket 5-10. . . . . . . . . . . . . . . . . . . . . . . Objective 5-10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Background 5-10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tools 5-10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Procedure to Attach the Surge Suppressor to the Mounting Bracket 5-10. . Power, Ground and Battery Cabling for Sites Equipped With Optional Primary Surge Suppressor 5-12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Objective 5-12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Other Grounding Considerations 5-12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Power Considerations and Configurations 5-12. . . . . . . . . . . . . . . . . . . . . . Cables Needed 5-13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC Input Cable Information 5-13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DC Input Cable Information 5-14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Antenna Cabling for Sites Equipped With Optional Primary Surge Suppressor 5-18Objective 5-18. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cable Labels 5-18. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Equipment Needed 5-18. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Antenna Cable Pin and Signal Information 5-18. . . . . . . . . . . . . . . . . . . . . . Procedure to Install Antenna Cabling for Sites Equipped with Primary Surge Suppressor 5-19. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Site I/O, Span Line, RGPS and Modem Cabling for Sites Equipped With Primary Surge Suppressor 5-24. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Objective 5-24. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cable Labels 5-24. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tools and Equipment 5-24. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Site I/O Cabling 5-24. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Procedure to Install Site I/O Cable Between Site I/O Junction Box and Optional Primary Surge Suppressor 5-25. . . . . . . . . . . . . . . . . . . . . . . . . . . Pin and Signal Information for Surge Suppressor Punchdown Block Cabling 5-27. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Table of Contents – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 2000Connecting Customer–Defined Inputs to the Primary Surge Suppressor 5-30Connecting the RGPS Cable to the Primary Surge Suppressor 5-30. . . . . . Connecting the Span Line Cable to the Primary Surge Suppressor 5-31. . . Connecting a Phone Line to the Primary Surge Suppressor (Modem Support) 5-31. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RGPS Cabling for Multi–BTS Configurations Equipped with Optional Primary Surge Suppressor 5-32. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Overview 5-32. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Background 5-32. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Required Equipment 5-32. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cable Diagram 5-33. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Procedure 5-33. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cable Connections 5-36. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Span Line Daisy Chain Cabling for Sites Equipped with Optional Primary Surge Suppressor 5-37. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Objective 5-37. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Background 5-37. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cable Description 5-37. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Procedure 5-37. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cable Connections 5-39. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Cabling OverviewDEC 2000 5-1SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYOverviewThis chapter provides the procedures to prepare the BTS site cabling forsites equipped with the optional Primary Surge Suppressor. Chapter 6shows the scope of work for unit cabling.You will connect the cables to the site and route them to the location ofthe BTS. You will attach the cables to the unit during the unit cablingprocedures in Chapter 6.Repeat cabling installation as necessary for each unit at the BTS.Cabling is one of the most noticeable aspects ofworkmanship. Straight runs and proper turns are critical fora positive evaluation of the work.NOTEConfigurations SupportedThis chapter supports cable installation for single carrier omniconfigurations and multi–carrier omni configurations. This chaptersupports cable installations for sites equipped with the optional PrimarySurge Suppressor.Cabling Installation OrderTo install the cables, Motorola recommends that the followingprocedures be completed in the order shown:1. Earth ground cabling2. AC power cabling3. DC power cabling4. Battery cabling (optional)5. Antenna cabling6. Site I/O interface cabling7. RGPS/HSO cabling (optional)8. Span line daisy chain cabling (optional)Cable LabelsThe “Cable Descriptions and Part Numbers” in Table 4-1 provides cabledescriptions and part numbers. The labels used to designate the cables(A, B, C, etc.) are used throughout this manual.5
Site Cabling for BTS With Optional Primary Surge SuppressorPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20005-2Preparing Site Cabling Scopeof WorkFigure 5-1 through Figure 5-8 shows the scope of work to be performedfor preparing the site cabling with the optional Primary SurgeSuppressor. Chapter 6 shows the scope of work for unit cabling.Figure 5-1: Site Cabling for One Microcell with Primary Surge SuppressorMICROCELL 1CUSTOMERINPUTSSPANRGPSPHONE(MODEM)ANT ARXDC POWERKEYB/1(ANTENNA)LABELNUMBEROF CABLESNAMEA/1(GROUND)U/1(DC POWER)SITE I/OCABLEP/1 (SU)M/1 (RGPS)N/1 (SPAN)O/1 (CUSTOMERINPUTS)V/1 (PHONE)AC POWERT/1(AC POWER)C/1 (ANTENNA)PRIMARYSURGESUPPRESSORD/1(ANTENNA)S/1 (ACPOWER)MASTERGROUNDY/1 (MASTERGROUND)D/1(ANTENNA)ANT BTX/RXC/1 (ANTENNA)B/1 (GROUND)SITE I/OINTERFACE5
Site Cabling for BTS With Optional Primary Surge Suppressor – continuedDEC 2000 5-3SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYFigure 5-2: Site Cabling for Two Microcells with Primary Surge SuppressorMICROCELL 1MICROCELL 2DC POWERKEYB/1(ANTENNA)LABELNUMBEROF CABLESNAMEA/1(GROUND)U/1(DC POWER)E/1 (MIB) ORK/1 (MIB)SITE I/OCABLEQ/1 (SU)P/1 (SU)DC POWERU/1(DC POWER)A/1(GROUND)PRIMARYSURGESUPPRESSORD/1(ANTENNA 2)S/1(ACPOWER)D/1(ANTENNA 1)S/1 (ACPOWER)B/1 (GROUND)CUSTOMERINPUTSSPANRGPSPHONE(MODEM)M/1 (RGPS)N/1 (SPAN)O/1 (CUSTOMERINPUTS)V/1 (PHONE)SITE I/OINTERFACEANT ARXAC POWERT/1(AC POWER)C/1 (ANTENNA)MASTERGROUNDY/1 (MASTERGROUND)ANT BTX/RXC/1 (ANTENNA)5
Site Cabling for BTS With Optional Primary Surge Suppressor – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20005-4Figure 5-3: Site Cabling for Three Microcells with Primary Surge SuppressorMICROCELL 1MICROCELL 3 MICROCELL 2DC POWER2XKEYB/1(ANTENNA)LABELNUMBEROF CABLESNAMEA/1(GROUND)U/1(DC POWER)LEGEND2X = SU Splitter/CombinerQ/1 (SU)H/1 (SU)F/1 (MIB) OR I/1 (MIB)SITE I/OCABLER/1 (SU)R/1 (SU)Q/1 (SU)DC POWERU/1(DC POWER)DC POWERU/1(DC POWER)A/1(GROUND)PRIMARYSURGESUPPRESSORD/1(ANTENNA 2)S/1(ACPOWER)D/1(ANTENNA 1)S/1 (ACPOWER)A/1(GROUND)D/1(ANTENNA 4)S/1(AC POWER)2XD/1(ANTENNA 3)B/1 (GROUND)E/1 (MIB) ORK/1 (MIB)ANT ARXAC POWERT/1(AC POWER)C/1 (ANTENNA)MASTERGROUNDY/1 (MASTERGROUND)ANT BTX/RXC/1 (ANTENNA)CUSTOMERINPUTSSPANRGPSPHONE(MODEM)M/1 (RGPS)N/1 (SPAN)O/1 (CUSTOMERINPUTS)V/1 (PHONE)SITE I/OINTERFACE5
Site Cabling for BTS With Optional Primary Surge Suppressor – continuedDEC 2000 5-5SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYFigure 5-4: Site Cabling for Four Microcells with Primary Surge SuppressorMICROCELL 4 MICROCELL 1MICROCELL 3 MICROCELL 2DC POWER2X2XKEYB/1(ANTENNA)LABELNUMBEROF CABLESNAMEA/1(GROUND)U/1(DC POWER)Q/1 (SU)LEGEND2X = SU Splitter/CombinerQ/1 (SU)Q/1 (SU)G/1 (MIB) ORJ/1 (MIB)SITE I/OCABLER/1 (SU)R/1 (SU)Q/1 (SU)DC POWERU/1(DC POWER)DC POWERU/1(DC POWER)DC POWERU/1(DC POWER)A/1(GROUND)A/1(GROUND)PRIMARYSURGESUPPRESSORD/1(ANTENNA 2)S/1(ACPOWER)D/1(ANTENNA 1)S/1 (ACPOWER)A/1(GROUND)D/1(ANTENNA 3)S/1(AC POWER)D/1 (ANTENNA 4)S/1 (AC POWER)B/1(GROUND)E/1 (MIB) ORK/1 (MIB)E/1 (MIB) ORK/1 (MIB)F/1 (MIB) OR I/1 (MIB)CUSTOMERINPUTSSPANRGPSPHONE(MODEM)M/1 (RGPS)N/1 (SPAN)O/1 (CUSTOMERINPUTS)V/1 (PHONE)SITE I/OINTERFACEANT ARXAC POWERT/1(AC POWER)C/1 (ANTENNA)MASTERGROUNDY/1 (MASTERGROUND)ANT BTX/RXC/1 (ANTENNA) 5
Site Cabling for BTS With Optional Primary Surge Suppressor – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20005-6Figure 5-5: Site Cabling for One Picocell with Primary Surge SuppressorPICOCELL 1DC POWERKEYB/1(ANTENNA)LABELNUMBEROF CABLESNAMEA/1(GROUND)U/1(DC POWER)SITE I/OCABLEP/1 (SU)PRIMARYSURGESUPPRESSORD/1(ANTENNA 1)S/1 (ACPOWER)B/1 (GROUND)CUSTOMERINPUTSSPANRGPSPHONE(MODEM)M/1 (RGPS)N/1 (SPAN)O/1 (CUSTOMERINPUTS)V/1 (PHONE)SITE I/OINTERFACEANT ARXAC POWERT/1(AC POWER)C/1 (ANTENNA)MASTERGROUNDY/1 (MASTERGROUND)ANT BTX/RXC/1 (ANTENNA)5
Site Cabling for BTS With Optional Primary Surge Suppressor – continuedDEC 2000 5-7SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYFigure 5-6: Site Cabling for Two Picocells with Primary Surge SuppressorPICOCELL 1PICOCELL 2DC POWERKEYB/1(ANTENNA)LABELNUMBEROF CABLESNAMEA/1(GROUND)U/1(DC POWER)H/1 (MIB) ORL/1 (MIB)SITE I/OCABLEQ/1 (SU)P/1 (SU)DC POWERU/1(DC POWER)A/1(GROUND)PRIMARYSURGESUPPRESSORD/1(ANTENNA 2)S/1(ACPOWER)D/1(ANTENNA 1)S/1 (ACPOWER)B/1 (GROUND)CUSTOMERINPUTSSPANRGPSPHONE(MODEM)M/1 (RGPS)N/1 (SPAN)O/1 (CUSTOMERINPUTS)V/1 (PHONE)SITE I/OINTERFACEANT ARXAC POWERT/1(AC POWER)C/1 (ANTENNA)MASTERGROUNDY/1 (MASTERGROUND)ANT BTX/RXC/1 (ANTENNA)5
Site Cabling for BTS With Optional Primary Surge Suppressor – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20005-8Figure 5-7: Site Cabling for Three Picocells with Primary Surge SuppressorPICOCELL 1PICOCELL 3 PICOCELL 2DC POWER2XKEYB/1(ANTENNA)LABELNUMBEROF CABLESNAMEA/1(GROUND)U/1(DC POWER)LEGEND2X = SU Splitter/CombinerQ/1 (SU)Q/1 (SU)F/1 (MIB) ORI/1 (MIB)SITE I/OCABLER/1 (SU)R/1 (SU)Q/1 (SU)DC POWERU/1(DC POWER)DC POWERU/1(DC POWER)A/1(GROUND)PRIMARYSURGESUPPRESSORD/1(ANTENNA 2)S/1(ACPOWER)D/1(ANTENNA 1)S/1 (ACPOWER)A/1(GROUND)D/1(ANTENNA 3)S/1(AC POWER)2XB/1 (GROUND)H/1 (MIB) ORL/1 (MIB)CUSTOMERINPUTSSPANRGPSPHONE(MODEM)M/1 (RGPS)N/1 (SPAN)O/1 (CUSTOMERINPUTS)V/1 (PHONE)SITE I/OINTERFACEANT ARXAC POWERT/1(AC POWER)C/1 (ANTENNA)MASTERGROUNDY/1 (MASTERGROUND)ANT BTX/RXC/1 (ANTENNA)5
Site Cabling for BTS With Optional Primary Surge Suppressor – continuedDEC 2000 5-9SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYFigure 5-8: Site Cabling for Four Picocells with Primary Surge SuppressorPICOCELL 4 PICOCELL 1PICOCELL 3 PICOCELL 2DC POWER2X2XKEYB/1(ANTENNA)LABELNUMBEROF CABLESNAMEA/1(GROUND)U/1(DC POWER)H/1 (SU)LEGEND2X = SUSplitter/CombinerQ/1 (SU)H/1 (SU)G/1 (MIB) ORJ/1 (MIB)SITE I/OCABLEH/1 (SU)H/1 (SU)H/1 (SU)DC POWERS/1(DC POWER)DC POWERU/1(DC POWER)DC POWERU/1(DC POWER)A/1(GROUND)A/1(GROUND)PRIMARYSURGESUPPRESSORD/1(ANTENNA 2)S/1(ACPOWER)D/1(ANTENNA 1)S/1 (ACPOWER)A/1(GROUND)D/1(ANTENNA 3)S/1(AC POWER)D/1 (ANTENNA 4)S/1 (AC POWER)B/1 (GROUND)H/1 (MIB) ORL/1 (MIB)H/1 (MIB) ORL/1 (MIB)F/1 (MIB) ORI/1 (MIB)CUSTOMERINPUTSSPANRGPSPHONE(MODEM)M/1 (RGPS)N/1 (SPAN)O/1 (CUSTOMERINPUTS)V/1 (PHONE)SITE I/OINTERFACEANT ARXAC POWERT/1(AC POWER)C/1 (ANTENNA)MASTERGROUNDY/1 (MASTERGROUND)ANT BTX/RXC/1 (ANTENNA)5
Attaching Surge Suppressor to Mounting BracketPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20005-10ObjectiveThe objective of this procedure is to attach the optional Primary SurgeSuppressor to the mounting bracket. This procedure applies to mountingbrackets that are attached to a rack, wall or pole.You must attach the Primary Surge Suppressor to themounting bracket before you install the unit cabling.IMPORTANT*BackgroundThe following procedures should be followed in order to mount thesurge suppressor to the mounting bracket. The unit attaches to themounting bracket with three (3) M6 screws.ToolsThe following tools and materials are required to attach the unit to themounting bracket.STorque driver wrench, 1/4–in. hex female drive, 0–10 N–MST30 Torx tamper bitSThree M6X19 screws (Motorola Part Number 0387541C03)Procedure to Attach the SurgeSuppressor to the MountingBracketUse the procedure in Table 5-1 to attach the surge suppressor to themounting bracket. Refer to Figure 5-9.Table 5-1: Procedure to Attach the Surge Suppressor to the MountingBracketStep Action1Lift the unit and place it on the mounting bracket by aligningthe bracket’s upper arms into the rectangular cutouts in themounting tabs. The unit may need to be raised up slightly sothat the lower bracket flange does not contact the unit’s lowersurface.2Use a T30 Torx tamper bit to start, but not tighten, all threescrews in the location shown in Figure 5-9.3Use a T30 Torx tamper bit to torque the three mountingscrews to 5.0 N–M.5
Attaching Surge Suppressor to Mounting Bracket – continuedDEC 2000 5-11SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYFigure 5-9: Attaching the Surge Suppressor to the Mounting BracketHOOKSMOUNTING BRACKETSLIDE CUSTOMER–SUPPLIEDPADLOCK THROUGH HOLES INBRACKET (OPTIONAL)MOUNTING BRACKETM6 SCREWS (3)5
Power, Ground and Battery Cabling for Sites Equipped With OptionalPrimary Surge SuppressorPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20005-12ObjectiveThe objective of this procedure is to install the power, earth ground, andbattery cabling for one or more Microcell or Picocell units at a siteequipped with optional Primary Surge Suppressor.Dangerous voltages, capable of causing death, are presentin this equipment. Use extreme caution when handling andtesting this equipment.WARNINGOther GroundingConsiderationsThis procedure covers only the grounding information for the groundcables that attach to one or more Microcell or Picocell units. Groundingconsiderations beyond the ground cables that attach to the Microcell orPicocell are summarized in Appendix A. Refer to Appendix A and thesite documentation for other grounding considerations.Power Considerations andConfigurationsThe Primary Surge Suppressor is designed for 120/240 VAC 3–wire plusground single phase.The power and battery configurations for the MicroCell and PicoCellunits are:SAC power only (no battery)SAC power with short duration batterySDC powerNeither the ”+” or ”–” terminal of the DC Input isconnected to the BTS ground. If a negative supply input isprovided, the ”+” terminal of the DC input must beconnected to the Master Ground Plate (MGP). Byconnecting the ”+” terminal of the DC input to the MGP, anegative supply system is created.NOTE5
Power, Ground and Battery Cabling for Sites Equipped With OptionalPrimary Surge Suppressor – continuedDEC 2000 5-13SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYCables NeededTable 5-2 provides the quantity and description of the cables needed.Table 5-2: Cables Needed for Power, Earth Ground, and Battery ConnectionsCable Qty. Part Number DescriptionA 1–4 3087701C02 Ground cable, 8 -AWG, insulated copper wire. Requires one ring lugconnector.S 1–4 3087854C02 AC input cable, 14 AWG, 5 m, is designed for 88–260 VAC powerinput. Cable has Deutsch connector on both ends.T 1 CustomerSupplied AC Input power cable. 10–14 AWG, 90_C wire. Designed for120–240 VAC.U 1–4 3087854C04 DC input cable, 14 and 22 AWG, 5 m, is designed for 20 to 30 VDCpower input.Y 1 CustomerSupplied Master Ground Cable, 6 -AWG, insulated copper wire.AC Input Cable InformationThe information for the AC input cable(s) (Cable S) is given inFigure 5-10 and Table 5-3.Figure 5-10: AC Input Cable Connector InformationABCSOCKET POSITION ON CABLECONNECTOR SHOWNTable 5-3: AC Input Cable InformationConnector Wire Color DescriptionA Black LineB Green GroundC White Neutral5
Power, Ground and Battery Cabling for Sites Equipped With OptionalPrimary Surge Suppressor – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20005-14DC Input Cable InformationThe information for the DC input cable(s) (Cable U) is given inFigure 5-11 and Table 5-4.Figure 5-11: DC Input Cable Connector InformationABCDSOCKET POSITION ONCABLE CONNECTOR SHOWNTable 5-4: DC Input Cable InformationConnector WireColor Description CommentsA Yellow Switch A No connectionB Red Positive Connect to positiveterminal of supply.C Blue Switch B Connect to negativeterminal of supply.D Black Negative Connect to negativeterminal of supply.ProcedureThe system configuration determines which power cables are installed.The ground cable is always installed. Based on the system configurationperform the appropriate procedures from the following tables.Table 5-5: Procedure to Install the Master Ground Cable on a BTSEquipped with Optional Primary Surge SuppressorStep Action1Connect the Master Ground cable (cable Y) to the EARTHGND connector on the Primary Surge Suppressor.2Connect the other end of cable Y to the customer–definedmaster ground plate.5
Power, Ground and Battery Cabling for Sites Equipped With OptionalPrimary Surge Suppressor – continuedDEC 2000 5-15SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYTable 5-6: Procedure to Install Earth Ground Cable on a BTSEquipped with Optional Primary Surge SuppressorStep Action1Route cable A (ground cable) from the ground lug on themounting bracket to the Primary Surge Suppressor.2Connect cable A to the GND connector 1–4 on the PrimarySurge Suppressor.Table 5-7: Procedure to Install AC Input Cable(s) on a BTS Equippedwith Optional Primary Surge SuppressorStep Action1Connect the customer–supplied AC input cable (cable T) tothe customer defined AC power source. Refer to Table 5-3 forwiring information.2Verify all connections of cable T with an ohmmeter prior torouting the cable.3Route cable T via 1–in. conduit from the customer definedAC power source to the breaker terminals inside the PrimarySurge Suppressor. Refer to Figure 5-12.4Route the AC Input Power Cable (cable S – Motorola partnumber 3087854C02) from the Carrier 1–4 AC Outputconnector on the Primary Surge Suppressor to the unitlocation(s).5
Power, Ground and Battery Cabling for Sites Equipped With OptionalPrimary Surge Suppressor – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20005-16Figure 5-12: Primary Surge Suppressor AC Input Power Connection LocationsGROUNDNEUTRALINPUT LINE 1INPUT LINE 21–IN CONDUITCUSTOMERAC POWERCOURCEAC LOADCENTER ALARMCONNECTION5
Power, Ground and Battery Cabling for Sites Equipped With OptionalPrimary Surge Suppressor – continuedDEC 2000 5-17SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYTable 5-8: Procedure to Install DC Input Cable(s)Step Action1Connect the loose wires of the DC Input Cable (cable U) tothe customer defined DC power source. Refer to Table 5-4for wiring information.2Verify all connections of cable U with an ohmmeter prior torouting the cable.3Route cable U from the DC power supply to the unit location.5
Antenna Cabling for Sites Equipped With Optional Primary SurgeSuppressorPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20005-18ObjectiveThe objective of this procedure is to install the cabling for theantenna(s).The antenna cabling is installed between one or more units and thePrimary Surge Suppressor. No lightning arrestors are used.Cable LabelsThe cable designations are referenced to Table 4-1 in the “CableDescription” area of this chapter.Equipment NeededTable 5-9 provides the quantities and descriptions of the cables.Table 5-9: Cables Needed for Antenna ConnectionsCable Qty. Part Number DescriptionC1 to 8 Customer Supplied Antenna cable, 50–Ohm coaxial terminated with at least one male,N–type connector.D 2–6 Customer Supplied Antenna cable, terminated with 2 N–type connectorsAntenna Cable Pin and SignalInformationThe antenna cabling uses a 50–Ohm coaxial cable. The inner conductorprovides signaling and the outer conductor provides shielding andground.Figure 5-13: Antenna Cabling DetailsOUTERCONDUCTORINNERCONDUCTORANTENNA CABLE (COAXIAL)CONNECTORTable 5-10: Pin and Signal Information for Cables C and D (AntennaCable)Antenna Inner Conductor OuterConductorB (Microcell only) TX/RX GroundARX (Microcell)TX/RX (Picocell) Ground5
Antenna Cabling for Sites Equipped With Optional Primary SurgeSuppressor – continuedDEC 2000 5-19SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYProcedure to Install AntennaCabling for Sites Equippedwith Primary Surge SuppressorDo the procedure in Table 5-11 to install the antenna cabling.Lightning arrestors are installed on the Primary SurgeSuppressor for two units. You must add additionallightning arrestors when you expand from one to two units;two to three units and from three to four units.IMPORTANT*Table 5-11: Procedure to Install Antenna Cabling for Sites Equippedwith Primary Surge SuppressorStep Action1Route cable D (antenna cable) between the unit(s) and thePrimary Surge Suppressor.2Route cable C (antenna cable) from the Primary SurgeSuppressor directly to the antenna(s).3Torque connectors to 4.3 N–m.Figure 5-14: Antenna Cabling for one Microcell with Primary Surge SuppressorMICROCELL 1KEYB/1(ANTENNA)LABELNUMBEROF CABLESNAMED/1(ANTENNA)PRIMARY SURGESUPPRESSORANT ARXANT BTX/RXD/1(ANTENNA) C/1(ANTENNA)C/1(ANTENNA)5
Antenna Cabling for Sites Equipped With Optional Primary SurgeSuppressor – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20005-20Figure 5-15: Antenna Cabling for Two Microcells with Primary Surge SuppressorMICROCELL 1KEYB/1(ANTENNA)LABELNUMBEROF CABLESNAMED/1(ANTENNA)PRIMARY SURGESUPPRESSORMICROCELL 2D/1(ANTENNA)ANTENNA 1TX/RXANTENNA 2TX/RXC/1(ANTENNA)C/1(ANTENNA)Figure 5-16: Antenna Cabling for Three Microcells with Primary Surge SuppressorMICROCELL 1KEYB/1(ANTENNA)LABELNUMBEROF CABLESNAMED/1(ANTENNA)PRIMARY SURGESUPPRESSORMICROCELL 2D/1(ANTENNA)MICROCELL 3D/1(ANTENNA)D/1(ANTENNA)ANTENNA 3RXANTENNA 4TX/RXANTENNA 2TX/RXANTENNA 1TX/RXC/1(ANTENNA)C/1(ANTENNA)C/1(ANTENNA)C/1(ANTENNA)5
Antenna Cabling for Sites Equipped With Optional Primary SurgeSuppressor – continuedDEC 2000 5-21SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYFigure 5-17: Antenna Cabling for Four Microcells with Primary Surge SuppressorMICROCELL 1KEYB/1(ANTENNA)LABELNUMBEROF CABLESNAMED/1(ANTENNA)PRIMARY SURGESUPPRESSORMICROCELL 2D/1(ANTENNA)MICROCELL 3D/1(ANTENNA)D/1(ANTENNA)MICROCELL 4ANTENNA 3TX/RXANTENNA 4TX/RXANTENNA 2TX/RXANTENNA 1TX/RXC/1(ANTENNA)C/1(ANTENNA)C/1(ANTENNA)C/1(ANTENNA)Figure 5-18: Antenna Cabling for one Picocell with Primary Surge SuppressorPICOCELL 1KEYB/1(ANTENNA)LABELNUMBEROF CABLESNAMED/1(ANTENNA) PRIMARY SURGESUPPRESSOR ANT ATX/RXC/1(ANTENNA)5
Antenna Cabling for Sites Equipped With Optional Primary SurgeSuppressor – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20005-22Figure 5-19: Antenna Cabling for Two Picocells with Primary Surge SuppressorPICOCELL 1KEYB/1(ANTENNA)LABELNUMBEROF CABLESNAMED/1(ANTENNA) PRIMARY SURGESUPPRESSORPICOCELL 2D/1(ANTENNA)ANTENNA 1TX/RXANTENNA 2TX/RXC/1(ANTENNA)C/1(ANTENNA)Figure 5-20: Antenna Cabling for Three Picocells with Primary Surge SuppressorPICOCELL 1KEYB/1(ANTENNA)LABELNUMBEROF CABLESNAMED/1(ANTENNA)PRIMARY SURGESUPPRESSORPICOCELL 2D/1(ANTENNA)PICOCELL 3D/1(ANTENNA)ANTENNA 3TX/RXANTENNA 2TX/RXANTENNA 1TX/RXC/1(ANTENNA)C/1(ANTENNA)C/1(ANTENNA)5
Antenna Cabling for Sites Equipped With Optional Primary SurgeSuppressor – continuedDEC 2000 5-23SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYFigure 5-21: Antenna Cabling for Four Picocells with Primary Surge SuppressorPICOCELL 1KEYB/1(ANTENNA)LABELNUMBEROF CABLESNAMED/1(ANTENNA)PRIMARY SURGESUPPRESSORPICOCELL 2D/1(ANTENNA)PICOCELL 3D/1(ANTENNA)PICOCELL 4D/1(ANTENNA)ANTENNA 3TX/RXANTENNA 4TX/RXANTENNA 2TX/RXANTENNA 1TX/RXC/1(ANTENNA)C/1(ANTENNA)C/1(ANTENNA)C/1(ANTENNA)5
Site I/O, Span Line, RGPS and Modem Cabling for Sites Equipped WithPrimary Surge SuppressorPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20005-24ObjectiveThe objective of this procedure is to install the cabling between the SiteI/O junction box to the Primary Surge Suppressor. This procedure alsoshows the punchblock cabling for the Site I/O cable.Cable LabelsThe cable designations are referenced to Table 4-1 in the “CableDescription” area of this chapter.Tools and EquipmentTable 5-12 provides the quantities and descriptions of the cables.Table 5-12: Cables Needed for Antenna ConnectionsCable Qty. Part Number DescriptionC 1–8 Customer Supplied Antenna cable, 50–Ohm coaxial terminated with at least one male,N–type connector.D 2–6 Customer Supplied Antenna cable, terminated with 2 N–type connectorsM 1 3086039H11 RGPS cable, 125 ft.3086039H12 RGPS cable, 250 ft.3086039H13 RGPS cable, 500 ft.3086039H14 RGPS cable, 1000 ft.3086039H15 RGPS cable, 2000 ft.N 1 Customer Supplied Span Cable. 22–24 AWG solid copper twisted pair.O 1 Customer Supplied Customer Input Cable. 22–24 AWG solid copper twisted pair.T 1 Customer Supplied AC Input Power Cable. 14 AWG. Designed for 120–240 VAC.Terminated by at least 1 Deutsch connector.V 1 Customer Supplied Phone (Modem) Cable. 22–24 AWG solid copper twisted pair.Site I/O CablingThe Primary Surge Suppressor is optional and is supplied by Motorola.The Site I/O cable between the Primary Surge Suppressor and units 1and 2 is part of the Site I/O Junction box and is supplied by Motorola.The customer determines the Primary Surge Suppressor configuration.The end result is the correct signals getting to the correct punchblocklocation on the punchdown block.5
Site I/O, Span Line, RGPS and Modem Cabling for Sites Equipped WithPrimary Surge Suppressor – continuedDEC 2000 5-25SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYProcedure to Install Site I/OCable Between Site I/OJunction Box and OptionalPrimary Surge SuppressorDo the procedure in Table 5-13 to connect the Site I/O cable. Refer toFigure 5-22, Figure 5-23 and Figure 5-24.Table 5-13: Procedure to Install Site I/O Cable Between Site I/OJunction Box and Optional Primary Surge SuppressorStep Action1Route the Site I/O cable(s) from the unit location to thePrimary Surge Suppressor.2Connect the Site I/O cable from unit 1 to the connectorlabeled SITE I/O 1 on the right side of the Surge Suppressor.3Connect the appropriate conductors or wires to the PrimarySurge Suppressor Punchdown block.Figure 5-22: Site I/O Cabling Details with Optional Primary Surge Suppressor (MicroCell Unit Shown)PRIMARYSURGESUPPRESSORSITE I/OJUNCTION BOXSITE I/OCABLEACPOWERTANTENNADMASTERGROUNDYMICROCELL 1CUSTOMERINPUTSSPANRGPSPHONE(MODEM)MNOVSITE I/OINTERFACECONDUIT5
Site I/O, Span Line, RGPS and Modem Cabling for Sites Equipped WithPrimary Surge Suppressor – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20005-26Figure 5-23: Punchdown Block LocationPUNCHDOWN BLOCKPRIMARY SURGESUPPRESSORFigure 5-24: Punchdown Block5
Site I/O, Span Line, RGPS and Modem Cabling for Sites Equipped WithPrimary Surge Suppressor – continuedDEC 2000 5-27SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYPin and Signal Information forSurge Suppressor PunchdownBlock CablingTable 5-14 gives the pin and signal information for connecting the loosewires to the customer locations on the Punchdown Block.5
Site I/O, Span Line, RGPS and Modem Cabling for Sites Equipped WithPrimary Surge Suppressor – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20005-28Table 5-14: Pin/Signal Information for Site I/O Cable and Punchdown BlockBTS Interface PunchblockLocation DescriptionOSP 1T Customer Input 1 SignalOSP 1R Customer Input 1 GroundOSP 2T Customer Input 2 SignalOSP 2R Customer Input 2 GroundOSP 3T Customer Input 3 SignalOSP 3R Customer Input 3 GroundOSP 4T Customer Input 4 SignalCustomer InputOSP 4R Customer Input 4 GroundCustomer Input OSP 5T Customer Input 5 SignalOSP 5R Customer Input 5 GroundOSP 6T Customer Input 6 SignalOSP 6R Customer Input 6 GroundOSP 7T Customer Input 7 SignalOSP 7R Customer Input 7 GroundOSP 8T Customer Input 8 Signal*OSP 8R Customer Input 8 Ground*OSP 9T Data to Tail –OSP 9R Data to Tail +OSP 10T Data from Tail –OSP 10R Data from Tail +Sync ReverseOSP 11T 1 PPS to Tail –Sync Reverse OSP 11R 1 PPS to Tail +OSP 12T 1 PPS from Tail –OSP 12R 1 PPS from Tail +OSP 13T Downstream BTS Detect +OSP 13R Downstream BTS Detect – . . . continued on next page5
Site I/O, Span Line, RGPS and Modem Cabling for Sites Equipped WithPrimary Surge Suppressor – continuedDEC 2000 5-29SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYTable 5-14: Pin/Signal Information for Site I/O Cable and Punchdown BlockBTS Interface DescriptionPunchblockLocationOSP 14T Data from Head –OSP 14R Data from Head +OSP 15T Data to Head –OSP 15R Data to Head +OSP 16T 1 PPS from Head –OSP 16R 1 PPS from Head +Sync ForwardOSP 17T 1 PPS to Head –Sync ForwardOSP 17R 1 PPS to Head +OSP 18T RGPS 28VOSP 18R RGPS GroundOSP 18T RGPS 28VOSP 18R RGPS GroundOSP 19T RGPS 28VOSP 19R RGPS GroundUnusedOSP20T UnusedUnusedOSP20R UnusedOSP 21T RX TIP Primary (Network)OSP 21R RX RING Primary (Network)OSP 22T TX TIP Primary (Network)Span (Network)OSP 22R TX RING Primary (Network)Span (Network)OSP 23T RX TIP Secondary (Network)OSP 23R RX RING Secondary (Network)OSP 24T TX TIP Secondary (Network)OSP 24R TX RING Secondary (Network)Phone (Modem)OSP 25T MODEM TIPPhone (Modem)OSP 25R MODEM RING*Motorola recommends that you use the Customer Input 8 Signal and Ground for load center alarms.5
Site I/O, Span Line, RGPS and Modem Cabling for Sites Equipped WithPrimary Surge Suppressor – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20005-30Connecting Customer–DefinedInputs to the Primary SurgeSuppressorThe unit provides eight customer–defined inputs for connection toexternal contacts. Each input (a signal/ground pair) is monitored for an“OPEN” (>50 k Ohms) or “CLOSED” (<3 Ohms) condition.Motorola recommends using Customer Input 8 Signal and Ground forload center alarms. The Primary Surge Suppressor is shipped with theAC load center alarms already connected. Refer to Figure 5-12.Connecting the RGPS Cable tothe Primary Surge SuppressorThe RGPS cable (cable M) is connected to the Primary Surge Suppressorpunchdown block (Sync Forward) of the BTS. Table 5-15 provides thepunchdown block to RGPS connections.Table 5-15: Connecting the RGPS to the Site I/O CablePunchdown Block RGPS (Cable M)Sync ForwardDescriptions Punchdown BlockLocation RGPS Description RGPS Color Code(wire/stripe)Data from Head – OSP14T Transmit Port – Green/BlackData from Head + OSP14R Transmit Port + GreenData to Head – OSP15T Receive Port – White/BlackData to Head + OSP15R Receive Port + White1 pps from Head – OSP16T 1 PPS Timing – Brown/Black1 pps from Head + OSP16R 1 PPS Timing + BrownRGPS 28V OSP18T Power 1 BlueOSP19T Power 2 YellowRGPS Ground OSP18R DC Ground 1 Blue/BlackOSP19R DC Ground 2 Yellow/BlackNOTEThe RGPS must also be ground referenced to the BTS “digital” ground. This is done byconnecting the Red/Grey lead (RGPS Ground) from the Sync Forward Interface to theBlack/Blue lead (Customer Input 8 Ground) from the Customer Input interface.5
Site I/O, Span Line, RGPS and Modem Cabling for Sites Equipped WithPrimary Surge Suppressor – continuedDEC 2000 5-31SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYConnecting the Span LineCable to the Primary SurgeSuppressorThe unit provides two, four–wire JT1 interfaces for backhaul support.Each interface is made up of Transmit Tip/Ring and Receive Tip/Ringconnections.The Transmit and Receive data flow is given from the perspective of theunit. Only a single span line (Primary) is required for BTS operation.Connecting a Phone Line to thePrimary Surge Suppressor(Modem Support)The unit provides a two–wire analog phone line interface for modemsupport. The unit Tip and Ring signals are connected to the externalphone line Tip and Ring.5
RGPS Cabling for Multi–BTS Configurations Equipped with OptionalPrimary Surge SuppressorPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20005-32OverviewThis procedure gives information to connect multiple units for bothRGPS (synchronous) and HSO (non–synchronous) configurations.BackgroundThe RGPS only connects to the first unit of a multi–unit BTS. This firstunit sends timing signals to all other units in a multi–unit BTS. Youonly need to connect the first units of each BTS to each other. Thisallows “sharing” of a single RGPS antenna between several single ormulti–unit BTSs.This also applies to systems using HSO instead of RGPS. The HSOtiming is “shared” in the same way.Required EquipmentCablesThe RGPS Synchronization Cable is contained in the Motorola kitslisted in Table 5-16:Table 5-16: Cable Descriptions and Part NumbersCable Qty. Part Number DescriptionX 1–11 3086039H18 RGPS Synchronization cable (part of kit SGKN4351A).3086039H19 RGPS Synchronization cable (part of kit SGKN4352A).Motorola kitsTable 5-17 and Table 5-18 show the contents of Motorola kitsSGKN4351A and SGKN4352A. These kits are necessary for RGPScabling between multiple BTS locations.Table 5-17: RGPS Synchronization Cable Kit – SGKN4351ACable Qty. Motorola PartNumber DescriptionX 1 3086039H18 RGPS Sync Cable, 2000 ft.n/a 2 5864461A03 Fitting, liquid tight.n/a 2 0264599A02 Nut, nylon lockingTable 5-18: RGPS Synchronization Cable Kit – SGKN4352ACable Qty. Motorola PartNumber DescriptionX 1 3086039H19 RGPS Sync Cable, 3280 ft.n/a 2 5864461A03 Fitting, liquid tight.n/a 2 0264599A02 Nut, nylon locking5
RGPS Cabling for Multi–BTS Configurations Equipped with OptionalPrimary Surge Suppressor – continuedDEC 2000 5-33SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYCable DiagramFigure 5-25 and Figure 5-26 both show the cabling for multi–unitconfigurations for both RGPS (sychronous) and HSO(non–synchronous).ProcedureConnect the cables (Cable X) between the Primary Surge Suppressors ofeach BTS. Refer to the cable run list in Table 5-19, Figure 5-25, andFigure 5-26.5
RGPS Cabling for Multi–BTS Configurations Equipped with OptionalPrimary Surge Suppressor – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20005-34Figure 5-25: Site I/O Interface Cabling for RGPS (Synchronous) ConfigurationsCUSTOMERINPUTSSPANRGPSPHONE(MODEM)PRIMARYSURGESUPPRESSORSITE I/OCABLECUSTOMERINPUTSSPANPHONE(MODEM)SITE I/OCABLECUSTOMERINPUTSSPANPHONE(MODEM)SITE I/OCABLECUSTOMERINPUTSSPANPHONE(MODEM)SITE I/OCABLERGPS DAISY CHAIN CABLERGPS DAISY CHAIN CABLERGPS DAISY CHAIN CABLENOTE 1: EACH BTS MAY CONTAIN UP TOFOUR SC340 UNITS.NOTE 2: A MAXIMUM OF 12 BTS MAY BEINTERCONNECTED WITH A MAXIMUMDASIY CHAIN CABLE LENGTH OF 600MBETWEEN EACH BTS. A MAXIMUM OFSEVEN BTS MAY BE INTERCONNECTEDWITH A MAXIMUM DAISY CHAIN CABLELENGTH OF 1KM BETWEEN EACH BTS.MAXIMUMDISTANCE IS1 KM (SEENOTE 2)BTS 1 (SEE NOTE 1)BTS 3(SEE NOTE 1)BTS 4(SEE NOTE 1)UNIT 4 UNIT 3 UNIT 2 UNIT 1UNIT 3 UNIT 2 UNIT 1UNIT 2 UNIT 1UNIT 1XXXBTS 2(SEE NOTE 1)MAXIMUMDISTANCE IS1 KM (SEENOTE 2)MAXIMUMDISTANCE IS1 KM (SEENOTE 2)UPSTREAMUPSTREAMUPSTREAMDOWNSTREAMDOWNSTREAMDOWNSTREAMPRIMARYSURGESUPPRESSORPRIMARYSURGESUPPRESSORPRIMARYSURGESUPPRESSOR5
RGPS Cabling for Multi–BTS Configurations Equipped with OptionalPrimary Surge Suppressor – continuedDEC 2000 5-35SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYFigure 5-26: Site I/O Interface Cabling for HSO (Non–Synchronous) ConfigurationsCUSTOMERINPUTSSPANPHONE(MODEM)SITE I/OCABLECUSTOMERINPUTSSPANPHONE(MODEM)SITE I/OCABLECUSTOMERINPUTSSPANPHONE(MODEM)SITE I/OCABLECUSTOMERINPUTSSPANPHONE(MODEM)SITE I/OCABLERGPS DAISY CHAIN CABLERGPS DAISY CHAIN CABLERGPS DAISY CHAIN CABLEMAXIMUMDISTANCE IS600M (SEENOTE 2BTS 1 (SEE NOTE 1)BTS 2(SEE NOTE 1)BTS 3(SEE NOTE 1)BTS 4(SEE NOTE 1)UNIT 4 UNIT 3 UNIT 2 UNIT 1UNIT 3 UNIT 2 UNIT 1UNIT 2 UNIT 1UNIT 1XXXMAXIMUMDISTANCE IS600M (SEENOTE 2MAXIMUMDISTANCE IS600M (SEENOTE 2DOWNSTREAMDOWNSTREAMDOWNSTREAMUPSTREAMUPSTREAMUPSTREAMNOTE 1: EACH BTS MAY CONTAIN UP TOFOUR SC340 UNITS.NOTE 2: A MAXIMUM OF 12 BTS MAY BEINTERCONNECTED WITH A MAXIMUMDASIY CHAIN CABLE LENGTH OF 600MBETWEEN EACH BTS. A MAXIMUM OFSEVEN BTS MAY BE INTERCONNECTEDWITH A MAXIMUM DAISY CHAIN CABLELENGTH OF 1KM BETWEEN EACH BTS.PRIMARYSURGESUPPRESSORPRIMARYSURGESUPPRESSORPRIMARYSURGESUPPRESSORPRIMARYSURGESUPPRESSOR5
RGPS Cabling for Multi–BTS Configurations Equipped with OptionalPrimary Surge Suppressor – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20005-36Cable ConnectionsFor a full signal description of the Site I/O cable, refer to Table 5-14 inthe “Site I/O, Span Line, RGPS and Modem Cabling For Sites EquippedWith Primary Surge Suppressor” procedure.The pin number and wire color are based on the Site I/Ocable. The pin number corresponds to pins on the Site I/Ojunction box connectors.NOTETable 5-19: Multi–BTS RGPS Cable Run List for Primary Surge SuppressorSync Reverse – From BTS N InterconnectingRGPS Cable(Cable X)Sync Forward – To BTS N+1PunchblockLocation Signal RGPS CableColor PunchblockLocation SignalOSP 9T Data to Tail– Green/Black OSP 14T Data from Head–OSP 9R Data to Tail+ Green OSP 14R Data from Head+OSP 10T Data from Tail– White/Black OSP 15T Data to Head–OSP 10R Data from Tail+ White OSP 15R Data to Head+OSP 11T 1 PPS to Tail– Brown/Black OSP 16T 1 PPS from Head–OSP 11R 1 PPS to Tail+ Brown OSP 16R 1 PPS from Head+OSP 12T 1 PPS from Tail– Red/Black OSP 17T 1 PPS to Head–OSP 12R 1 PPS from Tail+ Red OSP 17R 1 PPS to Head+OSP 8R Ground Blue/Black OSP 8R Ground*The Multi–BTS Synchronization interface must also be referenced to the BTS digital ground through a 7.5Kohm, 1W resistor. This resistor should be physically located at the punch block or terminal strip at each SyncReverse connection in series with the Black/Blue Ground wire.5
Span Line Daisy Chain Cabling for Sites Equipped with Optional PrimarySurge SuppressorDEC 2000 5-37SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYObjectiveThe objective of this procedure is to install span line cabling betweenmultiple BTSs equipped with Primary Surge Suppressor in an open daisychain configuration.BackgroundThis feature allows BTSs to be linked together in an open daisy chainloop using a single T1/JT1/E1 span. This will reduce the number ofspans necessary to support a JCDMA system and minimize unusedchannels.Each BTS may contain up to four units. A maximum of 12 BTSs maybe combined in a single daisy chain.Cable DescriptionThe following cables are necessary to do this procedure.Table 5-20: Cable Descriptions and Part NumbersCable Qty. Part Number DescriptionW 1–3 CustomerSupplied Span Line Daisy Chain CableProcedureAttach the span line daisy chain cable (Cable W) to the Primary SurgeSuppressor of each BTS. Refer to Figure 5-27 and Table 5-21.5
Span Line Daisy Chain Cabling for Sites Equipped with Optional PrimarySurge Suppressor – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20005-38Figure 5-27: Site I/O Interface Cabling for Span Line Daisy Chain CablingCUSTOMERINPUTSSPANRGPSPHONE(MODEM)PRIMARYSURGESUPPRESSORSITE I/OCABLECUSTOMERINPUTSSPANPHONE(MODEM)SITE I/OCABLECUSTOMERINPUTSSPANPHONE(MODEM)SITE I/OCABLECUSTOMERINPUTSSPANPHONE(MODEM)SITE I/OCABLEBTS 1(SEE NOTE 1)SPAN LINE DAISYCHAIN CABLESPAN LINE DAISYCHAIN CABLESPAN LINE DAISYCHAIN CABLENOTE 1: EACH BTS SITE MAYCONTAIN UP TO FOUR SC340 UNITS.THERE MAY BE A TOTAL OF 12 BTSs INA DAISY CHAINWWWBTS 2(SEE NOTE 1)BTS 3(SEE NOTE 1)BTS 4(SEE NOTE 1)PRIMARYSURGESUPPRESSORPRIMARYSURGESUPPRESSORPRIMARYSURGESUPPRESSOR5
Span Line Daisy Chain Cabling for Sites Equipped with Optional PrimarySurge Suppressor – continuedDEC 2000 5-39SCt300 BTS Hardware Installation, ATP and FRU ProceduresPRELIMINARYCable ConnectionsTable 5-21 shows the cable run information for span line daisy chaincabling for BTSs equipped with the Primary Surge Suppressor.For a full signal description of the Site I/O cable refer to Table 5-14 inthe “Site I/O, Span Line, RGPS and Modem Cabling for Sites Equippedwith Optional Primary Surge Suppressor” procedure.The pin number and wire color are based on the Site I/Ocable. The pin number corresponds to pins on the Site I/Ojunction box connectors.NOTETable 5-21: Cable Run List for Span Line Daisy Chain CablingBTS 1 (Secondary Backhaul) BTS 2 (Primary Backhaul)PunchdownBlock Location Desc. PunchdownBlock Location Desc.OSP 23T RX TIP OSP 22T TX TIPOSP 23R RX RING OSP 22R TX RINGOSP 24T TX TIP OSP 21T RX TIPOSP 24R TX RING OSP 21R RX RING5
Span Line Daisy Chain Cabling for Sites Equipped with Optional PrimarySurge Suppressor – continuedPRELIMINARYSCt300 BTS Hardware Installation, ATP and FRU Procedures DEC 20005-40Notes5

Navigation menu