Nokia Solutions and Networks T7HM1 2.5GHz Diversity Access Point User Manual Exhibit 8

Nokia Solutions and Networks 2.5GHz Diversity Access Point Exhibit 8

Exhibit 8

APPLICANT: MOTOROLA Cellular Networks FCC ID: IHET7HM1 Users Manual Exhibit 2.5GHz MOTOwi4™ 25600 Diversity Access Point FCC Filing – WAP25600 MOTOwi4TM Diversity Access Point @ 2.5GHz 1 of 1
Ground Based Access Point (GAP)Hardware Installation68P09286A73 -1 JUL 2007PRELIMINARY - UNDER DEVELOPMENT© 2006 Motorola, Inc. All Rights R eserv ed
AccuracyWhile reasonable efforts have been made to assure the accuracy of this document, Motorola, Inc. assumes noliability resulting from any inaccuracies or omissions in this document, or from use of the information obtainedherein. Motorola, Inc. reserves the right to make changes to any products described herein to improve reliability ,function, or design, and reserves the right to revise this document and to make changes from time to time in contenthereof with no obligation to notify any person of revisions or changes. Motorola, Inc. does not assume any liabilityarising out of the application or use of any product, software, or circuit described herein; neither does it conveylicense under its patent rights or the rights of others. It is possible that this publication may contain references to, orinformation about Motorola products (machines and programs), programming, or services that are not announcedin your country . Such references or information must not be construed to mean that Motorola intends to announcesuch Motorola products, programming, or services in your country .CopyrightsThis document, Motorola products, and 3rd P arty Software products described in this document may includeor describe copyrighted Motorola and other 3rd P arty supplied computer programs stored in semiconductormemories or other media. Laws in the United States and other countries preserve for Motorola, its licensors, andother 3rd P arty supplied software certain exclusive rights for copyrighted material, including the exclusive rightto copy , reproduce in any form, distribute and make derivative works of the copyrighted material. Accordingly ,any copyrighted material of Motorola, its licensors, or the 3rd P arty software supplied material contained in theMotorola products described in this document may not be copied, reproduced, reverse engineered, distributed,merged or modified in any manner without the express written permission of Motorola. Furthermore, the purchaseof Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, anylicense under the copyrights, patents or patent applications of Motorola or other 3rd P arty supplied software,except for the normal non-exclusive, royalty free license to use that arises by operation of law in the sale of aproduct.A list of 3rd P arty supplied software copyrights are contained in the Supplemental information section of thisdocument.RestrictionsSoftware and documentation are copyrighted materials. Making unauthorized copies is prohibited by law . No partof the software or documentation may be reproduced, transmitted, transcribed, stored in a retrieval system, ortranslated into any language or computer language, in any form or by any means, without prior written permissionof Motorola, Inc.License AgreementsThe software described in this document is the property of Motorola, Inc and its licensors. It is furnished by expresslicense agreement only and may be used only in accordance with the terms of such an agreement.High Risk MaterialsComponents, units, or 3rd P arty products used in the product described herein are NOT fault-tolerant and are NOTdesigned, manufactured, or intended for use as on-line control equipment in the following hazardous environmentsrequiring fail-safe controls: the operation of Nuclear F acilities, Aircraft Navigation or Aircraft CommunicationSystems, Air Traffic Control, Life Support, or W eapons Systems (High Risk Activities). Motorola and its supplier(s)specifically disclaim any expressed or implied warranty of fitness for such High Risk Activities.T rademarksMotorola and the Stylized M Logo are registered in the US P atent & Trademark Office. All other product or servicenames are the property of their respective owners.The CE mark confirms Motorola, Inc. statement of compliance with EU directives applicable to this product. Copiesof the Declaration of Compliance and installation information in accordance with the requirements of EN50385 canbe obtained from the local Motorola representative or by contacting the Customer Network Resolution Center(CNRC). The 24 hour telephone numbers are listed at h t t p s : / / m y n e t w o r k s u p p o r t . m o t o r o l a . c o m . Select CustomerNetwork Resolution Center contact information. Alternatively if you do not have access to CNRC or theinternet, contact the Local Motorola Office.PRELIMINARY - UNDER DEVELOPMENT JUL 2007
T a b l eo fC o n t e n t sContents■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■Ground Based Access Point (GAP) Hardware InstallationRevision history ......................................... 2Version information ..................................... 2Resolution of Service Requests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Incorporation of Change Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2General information ....................................... 3Purpose ........................................... 3Cross references ....................................... 3Text conventions ....................................... 4Contacting Motorola ....................................... 524–hour support ....................................... 5Questions and comments .................................. 5Errors ............................................ 5Security advice .......................................... 6W arnings, cautions, and notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7W arnings ........................................... 7Cautions ........................................... 7Notes ............................................ 7Safety .............................................. 8General safety ........................................ 8Electromagnetic energy ................................... 8Caring for the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9In EU countries ....................................... 9In non -EU countries ..................................... 9CMM labeling and disclosure table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Motorola document set ..................................... 11Ordering documents and CD -ROMs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Document banner definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Data encryption ....................................... 11Supplemental information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Third party computer software and trademarks . . . . . . . . . . . . . . . . . . . . . . . 12FCC requirements ........................................ 13Content ........................................... 13R adio frequency exposure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13FCC Part 15 requirements .................................. 13Chapter 1: OverviewIntroduction ........................................... 1 - 2Product Description ....................................... 1 - 3Manual Order .......................................... 1 - 4Recommended Documents .................................... 1 - 5Abbreviations and Acronyms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 668P09286A73 -1 iJUL 2007 PRELIMINARY - UNDER DEVELOPMENT
ContentsTools and Materials ....................................... 1 - 7Introduction ......................................... 1 - 7Tools and Materials ..................................... 1 - 7Chapter 2: Site PreparationGeneral ............................................. 2 - 2Overview ........................................... 2 - 2Indoor and outdoor sites ................................... 2 - 2Site Preparation Overview .................................... 2 - 3Installation .......................................... 2 - 3Site Manager ........................................ 2 - 3V erification and Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 3Initial site inspection ....................................... 2 - 4Indoor intial site inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 4Outdoor initial site inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 4Prepare Site for Equipment Arrival . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 6Description ......................................... 2 - 6Equipment Arrival ...................................... 2 - 6Procedure to prepare the site for the equipment . . . . . . . . . . . . . . . . . . . . . . . 2 - 6Site layout inspection ...................................... 2 - 8Shipping and Handling ...................................... 2 - 9Overview ........................................... 2 - 9How Equipment is Shipped . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 9How Equipment Arrives ................................... 2 - 10Recommended Unpacking T ools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 10Unpacking ............................................ 2 - 11GAP equipment ....................................... 2 - 11Outdoor GAP ......................................... 2 - 11Unpacking procedure .................................... 2 - 12Indoor GAP ......................................... 2 - 13Unpacking procedure .................................... 2 - 13Chapter 3: Cable DescriptionsOverview ............................................. 3 - 2Configurations Supported .................................... 3 - 3Cable Installation Order ..................................... 3 - 4Cable Descriptions and P art Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 5Cable Lengths .......................................... 3 - 7Chapter 4: Indoor GAP Hardware InstallationIndoor (rack - mount) GAP installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 2GAP rack -mount cages ................................... 4 - 2Indoor GAP product identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 3B CU Cage and components ................................. 4 - 3TRX cage and components .................................. 4 - 3R ack mounting configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 4GAP rack mounting (typical) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 4Mounting and bolt configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 5Mounting hardware ..................................... 4 - 5Installation on concrete ................................... 4 - 6Installation on wooden floor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 6Installation of GAP cages in the indoor rack . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 8B CU cage .......................................... 4 - 8TRX cage ........................................... 4 - 8R ack cabling with cages installed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 9ii 68P09286A73 -1PRELIMINARY - UNDER DEVELOPMENT JUL 2007
Ground Based Access P oint (GAP) Hardw are Installation ContentsCage to cage ......................................... 4 - 9External cabling to rack ................................... 4 - 9Chapter 5: Outdoor GAP Hardware InstallationOutdoor (cabinet - mount) GAP installation . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 2GAP cabinets ......................................... 5 - 2Outdoor GAP product identification and configurations . . . . . . . . . . . . . . . . . . . . . 5 - 3Common outdoor mounting information . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 3Stacked GAP cabinet configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 3Side - by - side GAP cabinet configuration . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 3GAP concrete slab mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 4Installation Planning ..................................... 5 - 4Concrete slab configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 4Cabinet mounting ...................................... 5 - 6Conduit routed through back of BTS cabinet . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 7Conduit routed through bottom of BTS cabinet . . . . . . . . . . . . . . . . . . . . . . . 5 - 8I-beam support ........................................ 5 - 9Outdoor mounting and bolt configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 11Concrete pad installation and ground system . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 12Materials needed ...................................... 5 - 12Ground system ........................................ 5 - 12Conduit routing through concrete slab . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 13GAP side - by - side configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 14Side -by -side cabinets ................................... 5 - 14GAP stacked configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 15Stacked cabinets ....................................... 5 - 15GAP Cabinet cabling ....................................... 5 - 16Grounding .......................................... 5 - 16Cabling between cabinets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 16External cabling to cabinets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 16Other cabling ........................................ 5 - 16Chapter 6: Optional EquipmentChapter 7: What’s Next and CleanupIntroduction ........................................... 7 - 2Clean up the site ....................................... 7 - 2Installation checklist ..................................... 7 - 2Optimize the system ..................................... 7 - 2Site Cleanup ........................................... 7 - 3Tools and storage ...................................... 7 - 3Materials storage ...................................... 7 - 3Debris cleanup ........................................ 7 - 3Environment ......................................... 7 - 3Installation checklist ....................................... 7 - 5Installation completion checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 5Directions .......................................... 7 - 5Installation completion checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 568P09286A73 -1 iiiJUL 2007 PRELIMINARY - UNDER DEVELOPMENT
ContentsChapter 8: XXXXXXXXXXXXChapter 9: XXXXXXXXXXXXChapter 10: XXXXXXXXXXXXChapter 11: XXXXXXXXXXXXAppendix A: Alternate RF Head Installation ProcedureAppendix B: Alternate RGPS InstallationAppendix C: MMI Cable Fabricationiv 68P09286A73 -1PRELIMINARY - UNDER DEVELOPMENT JUL 2007
L i s to fF i g u r e sList of Figures■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■Figure 2 -1: GAP cabinet - lifting and mounting bracket locations . . . . . . . . . . . . . . . . 2 - 12Figure 4 -1: Concrete mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 6Figure 4 -2: W ooden floor mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 7Figure 5 -1: Single cabinet mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 5Figure 5 -2: Dual cabinet mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 6Figure 5 -3: GAP BTS cabinet “mud room” . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 7Figure 5 -4: “Mud room” conduit routed through back of BTS cabinet . . . . . . . . . . . . . . 5 - 8Figure 5 -5: “Mud room” conduit routed through bottom of BTS cabinet . . . . . . . . . . . . . 5 - 9Figure 5 -6: I -beam support for a single GAP cabinet . . . . . . . . . . . . . . . . . . . . . . . 5 - 10Figure 5 -7: I -beam support for two GAP cabinets . . . . . . . . . . . . . . . . . . . . . . . . 5 - 10Figure 5 -8: Ground ring layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 13Figure 5 -9: Conduit stub in concrete slab . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 13Figure 5 -10: GAP cabinets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 14Figure 5 -11: GAP cabinets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 1568P09286A73 -1 vJUL 2007 PRELIMINARY - UNDER DEVELOPMENT
List of Figuresvi 68P09286A73 -1PRELIMINARY - UNDER DEVELOPMENT JUL 2007
L i s to fT a b l e sList of Tables■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■T able 1 -1: Abbreviations and Acronyms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 6T able 1 -2: T ools and Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 7T able 3 -1: Cable Length Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 5Table 3-2: Cable Lengths ..................................... 3 - 7T able 5 -1: General materials needed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 12T able 7 -1: Site information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 5Table 7-2: Checklist ....................................... 7 - 668P09286A73 -1 viiJUL 2007 PRELIMINARY - UNDER DEVELOPMENT
List of T ablesviii 68P09286A73 -1PRELIMINARY - UNDER DEVELOPMENT JUL 2007
A b o u tT h i sM a n u a lGround Based Access Point (GAP) HardwareInstallation■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■What is covered in this manual?This manual describes general information and procedures for unpacking, site preparation,installation, and site clean up of the Ground Based Access P oint (GAP) hardware.68P09286A73 -1 1JUL 2007 PRELIMINARY - UNDER DEVELOPMENT
R evision historyRevision history■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■Version informationThe following shows the status of this document since it was first released.IssueDate of issueRemarks1 JUL 2007Preliminary releaseResolution of Service RequestsThe following Service Requests (SR) are resolved in this document:ServiceRequestCMBP NumberRemarksN/A N/A N/AIncorporation of Change NoticesThe following Change Notices (CN) are incorporated in this document:CN Date CN NumberT itleN/A N/A N/A2 68P09286A73 -1PRELIMINARY - UNDER DEVELOPMENT JUL 2007
Gener al informationGeneral information■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■PurposeMotorola cellular communications documents are intended to instruct and assist personnel inthe operation, installation and maintenance of the Motorola cellular infrastructure equipmentand ancillary devices. It is recommended that all personnel engaged in such activities beproperly trained by Motorola.Motorola disclaims all liability whatsoever , implied or express, for any risk of damage, loss orreduction in system performance arising directly or indirectly out of the failure of the customer ,or anyone acting on the customer’s behalf , to abide by the instructions, system parameters,or recommendations made in this document.These documents are not intended to replace the system and equipment training offered byMotorola. They can be used to supplement and enhance the knowledge gained through suchtraining.If this document was obtained when attending a Motorola training course, it willnot be updated or amended by Motorola. It is intended for TRAINING P URPOSESONL Y . If it was supplied under normal operational circumstances, to support a majorsoftware release, then corrections are supplied automatically by Motorola and postedon the Motorola customer website.Cross referencesReferences made to external publications are shown in italics. Other cross references,emphasized in blue text in electronic versions, are active links to the references.This document is divided into numbered chapters that are divided into sections. Sections arenot numbered, but are individually named at the top of each page, and are listed in the table ofcontents.68P09286A73 -1 3JUL 2007 PRELIMINARY - UNDER DEVELOPMENT
Gener al informationText conventionsThe following conventions are used in the Motorola cellular infrastructure documents torepresent keyboard input text, screen output text, and special key sequences.InputCharacters typed in at the keyboard are shown like this.Items of interest within a command appear like this.OutputMessages, prompts, file listings, directories, utilities, and environmentalvariables that appear on the screen are shown like this.Items of interest within a screen display appear like this.Special key sequencesSpecial key sequences are represented as follows:CTRL-c or CTRL+CPress the Ctrl and Ckeys at the same time.CTRL-SHIFT-c orCTRL+SHIFT+CPress the Ctrl ,Shift , and Ckeys at the same time.ALT-f or ALT+FPress the Alt and Fkeys at the same time.ALT+SHIFT+F11Press the Alt ,Shift and F11 keys at the same time.¦Press the pipe symbol key .RETURN or ENTERPress the Return or Enter key .4 68P09286A73 -1PRELIMINARY - UNDER DEVELOPMENT JUL 2007
Contacting MotorolaContacting Motorola■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■Motorola appreciates feedback from the users of our documents.24–hour supportIf you have problems regarding the operation of your equipment, contact the Customer NetworkResolution Center (CNRC) for immediate assistance. The 24–hour telephone numbers are listedat https://mynetworksupport.motorola.com . Select Customer Network Resolution Centercontact information . Alternatively if you do not have access to CNRC or the internet, contactthe Local Motorola Office.Questions and commentsSend questions and comments regarding user documentation to the email address:mydocs@motorola.com .ErrorsT o report a documentation error , call the CNRC (Customer Network Resolution Center) andprovide the following information to enable CNRC to open an SR (Service Request):•The document type•The document title, part number , and revision character•The page number with the error•A detailed description of the error and if possible the proposed solution68P09286A73 -1 5JUL 2007 PRELIMINARY - UNDER DEVELOPMENT
Securit y adviceSecurity advice■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■Motorola systems and equipment provide security parameters that can be configured by theoperator based on their particular operating environment. Motorola recommends setting andusing these parameters following industry recognized security practices. Security aspectsto be considered are protecting the confidentiality , integrity , and availability of informationand assets. Assets include the ability to communicate, information about the nature of thecommunications, and information about the parties involved.In certain instances, Motorola makes specific recommendations regarding security practices.The implementation of these recommendations and final responsibility for the security of thesystem lies with the operator of the system.Contact the Customer Network Resolution Center (CNRC) for assistance. The 24–hourtelephone numbers are listed at https://mynetworksupport.motorola.com . Select CustomerNetwork Resolution Center contact information , from the menu located to the left of theLogin box. Alternatively if you do not have access to CNRC or the internet, contact the LocalMotorola Office.6 68P09286A73 -1PRELIMINARY - UNDER DEVELOPMENT JUL 2007
W arnings, cautions, and notesWarnings, cautions, and notes■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■The following describes how warnings and cautions are used in this document and in alldocuments of this Motorola document set.WarningsW arnings precede instructions that contain potentially hazardous situations. W arnings areused to alert the reader to possible hazards that could cause loss of life or physical injury . Awarning has the following format:W arning text and consequence for not following the instructions in the w arning.CautionsCautions precede instructions and are used when there is a possibility of damage to systems,software, or individual items of equipment within a system. However , this damage presentsno danger to personnel. A caution has the following format:Caution text and consequence for not following the instructions in the caution.NotesA note means that there is a possibility of an undesirable situation or provides additionalinformation to help the reader understand a topic or concept. A note has the following format:Note text.68P09286A73 -1 7JUL 2007 PRELIMINARY - UNDER DEVELOPMENT
Safet ySafety■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■General safetyThe following general safety guidelines apply to Motorola equipment:•The power jack and mating plug of the power cable must meet InternationalElectrotechnical Commission (IEC) safety standards.Refer toGrounding Guideline for Cellular R adio Installations – 68P81150E62.•P ower down or unplug the equipment before servicing.•Using non -Motorola parts for repair could damage the equipment or void warranty .Contact Motorola W arranty and Repair for service and repair instructions.•P ortions of Motorola equipment may be damaged from exposure to electrostatic discharge.Use precautions to prevent damage.Electromagnetic energyRelevant standards (USA and EC) applicable when working with RF equipment are:•ANSI IEEE C95.1 -1991, IEEE Standard for Safety Levels with Respect to Human Exposureto R adio Frequency Electromagnetic Fields, 3 kHz to 300 GHz.•Council recommendation of 12 July 1999 on the limitation of exposure of the generalpublic to electromagnetic fields (0 Hz to 300 GHz) (1999/519/EC) and respective nationalregulations.•Directive 2004/40/EC of the European P arliament and of the Council of 29 April 2004 onthe minimum health and safety requirements regarding the exposure of workers to therisks arising from physical agents (electromagnetic fields) (18th individual Directive withinthe meaning of Article 16(1) of Directive 89/391/EEC).8 68P09286A73 -1PRELIMINARY - UNDER DEVELOPMENT JUL 2007
Caring for the en vironmentCaring for the environment■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■The following information describes national or regional requirements for the disposal ofMotorola supplied equipment and for the approved disposal of surplus packaging.Contact the Customer Network Resolution Center (CNRC) for assistance. The 24–hourtelephone numbers are listed at https://mynetworksupport.motorola.com . Select CustomerNetwork Resolution Center contact information . Alternatively if you do not have accessto CNRC or the internet, contact the Local Motorola Office.In EU countriesThe following information is provided to enable regulatory compliance with the European Union(EU) directives identified and any amendments made to these directives when using Motorolaequipment in EU countries.Disposal of Motorola equipmentEuropean Union (EU) Directive 2002/96/EC W aste Electrical and Electronic Equipment (WEEE)Do not dispose of Motorola equipment in landfill sites. In the EU , Motorola in conjunctionwith a recycling partner ensures that equipment is collected and recycled according to therequirements of EU environmental law .Disposal of surplus packagingEuropean P arliament and Council Directive 94/62/EC P ackaging and P ackaging W asteDo not dispose of surplus packaging in landfill sites. In the EU , it is the individual recipient’sresponsibility to ensure that packaging materials are collected and recycled according to therequirements of EU environmental law .In non -EU countriesIn non -EU countries, dispose of Motorola equipment and all surplus packaging in accordancewith national and regional regulations.68P09286A73 -1 9JUL 2007 PRELIMINARY - UNDER DEVELOPMENT
CMM labeling and disclosure tableCMM labeling and disclosure table■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■The P eople’s Republic of China require that our products comply with China ManagementMethods (CMM) environmental regulations. (China Management Methods refers to theregulationManagement Methods for Controlling P ollution by Electronic Information Products.)T wo items are used to demonstrate compliance; the label and the disclosure table.The label is placed in a customer visible position on the product.•Logo 1 means the product contains no substances in excess of the maximum concentrationvalue for materials identified in the China Management Methods regulation.•Logo 2 means that the product may contain substances in excess of the maximumconcentration value for materials identified in the China Management Methods regulation,and has an Environmental Friendly Use P eriod (EFUP) in years, fifty years in the exampleshown.Logo 1 Logo 2The Environmental Friendly Use P eriod (EFUP) is the period (in years) during which the T oxicand Hazardous Substances (T&HS) contained in the Electronic Information Product (EIP)will not leak or mutate causing environmental pollution, or bodily injury from the use of theEIP . The EFUP indicated by the Logo 2 label applies to a product and all its parts. Certainfield -replaceable parts, such as battery modules, can have a different EFUP and are markedseparately .The Disclosure table is intended only to communicate compliance with China requirements.It is not intended to communicate compliance with EU RoHS or any other environmentalrequirements.10 68P09286A73 -1PRELIMINARY - UNDER DEVELOPMENT JUL 2007
Motorola document setMotorola document set■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■The Motorola document sets provide the information to operate, install, and maintain theMotorola equipment.Ordering documents and CD -ROMsW ith internet access available, to view , download, or order documents (original or revised), visitthe Motorola Lifecycles Customer web page at https://mynetworksupport.motorola.com , orcontact your Motorola account representative.W ithout internet access available, order hard copy documents or CD -ROMs with your MotorolaLocal Office or Representative.If Motorola changes the content of a document after the original printing date, Motorolapublishes a new version with the same part number but a different revision character .Document banner denitionsA banner (oversized text on the bottom of the page, for example, PRELIMINARY — UNDERDEVELOPMENT ) indicates that some information contained in the document is not yet approvedfor general customer use.Data encryptionIn order to avoid electronic eavesdropping, data passing between certain elements in thenetwork is encrypted. In order to comply with the export and import requirements of particularcountries, this encryption occurs at different levels as individually standardized, or may not bepresent at all in some parts of the network in which it is normally implemented. The documentset, of which this document is a part, covers encryption as if fully implemented. Because therules differ in individual countries, limitations on the encryption included in the particularsoftware being delivered, are covered in the Release Notes that accompany the individualsoftware release.68P09286A73 -1 11JUL 2007 PRELIMINARY - UNDER DEVELOPMENT
Supplemental informationSupplemental information■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■Third party computer software and trademarksComputer softwareThe following is a list of the 3rd party computer software copyrights contained within thisMotorola product.Company CopyrightApache Software F oundation* Copyright 2002-2007 All rights reserved.ArtesynCopyright 2002-2007 All rights reserved.CMU *Copyright 2002-2007 All rights reserved.Freeware T ools / Utilities * Copyright 2002-2007 All rights reserved.P erformance T echnologies Copyright 2002-2007 All rights reserved.T elelogic Copyright 2002-2007 All rights reserved.QNX *Copyright 2002-2007 All rights reserved.W ind River Systems, Inc. Copyright 1984-2007 All rights reserved.* Publicly A vailable SoftwareTrademarksJava™ T echnology and/or J2ME™: Java and all other Java -based marks are trademarks orregistered trademarks of Sun Microsystems, Inc. in the U .S . and other countries.UNIX® : UNIX is a registered trademark of The Open Group in the United States and othercountries.12 68P09286A73 -1PRELIMINARY - UNDER DEVELOPMENT JUL 2007
FCC requirementsFCC requirements■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■ContentThis section presents F ederal Communications Commission (FCC) Rules P arts 15 and 68requirements and compliance information for the (W AP25400) MOTOwi4™ Diversity AccessP oint .Radio frequency exposureThis equipment is designed to gener ate and r adiate r adio frequency (RF) energy . Itshould be installed and maintained only b y tr ained technicians. Licensees of theF eder al Communications Commission (FCC) using this equipment are responsible forinsuring that its installation and oper ation comply with FCC regulations (47 C.F .R. &1.1310) designed to limit human exposure to RF energy .FCC Part 15 requirementsPart 15.19a(3) - Information to userThis device complies with P art 15 of the FCC Rules. Operation is subject to thefollowing two conditions:1. This device may not cause harmful interference, and2. This device must accept any interference received, including interference thatmay cause undesired operation68P09286A73 -1 13JUL 2007 PRELIMINARY - UNDER DEVELOPMENT
FCC requirementsPart 15.21 - Information to userChanges or modifications that change the FCC type approved configuration of theequipment could void the user’s authority to operate the equipment.15.105(b) - Information to userThis equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to P art 15 of the FCC Rules. These limits are designedto provide reasonable protection against harmful interference in a residentialinstallation. This equipment generates, uses and can radiate radio frequencyenergy and, if not installed and used in accordance with the instructions, may causeharmful interference to radio communications. However , there is no guarantee thatinterference will not occur in a particular installation. If this equipment does causeharmful interference to radio or television reception, which can be determined byturning the equipment OFF and ON , the user is encouraged to try to correct theinterference by one or more of the following measures:•Reorient or relocate the receiving antenna•Increase the separation between the equipment and receiver .•Connect the equipment into an outlet on a circuit different from that to whichthe receiver is connected.•Connect the equipment into an outlet on a circuit different from that to whichthe receiver is connected.•Consult the dealer or an experienced radio/TV technician for help.14 68P09286A73 -1PRELIMINARY - UNDER DEVELOPMENT JUL 2007
FCC requirementsDAP label and locationA label similar to the one illustrated is located as shown. All symbols may not display on thelabel depending on the market.ti_cdma_wimaxdap.epsBCU labelA label similar to the one illustrated is located on the equipment. All symbols may not display onthe label depending on the market.68P09286A73 -1 15JUL 2007 PRELIMINARY - UNDER DEVELOPMENT
FCC requirements16 68P09286A73 -1PRELIMINARY - UNDER DEVELOPMENT JUL 2007
C h a p t e r1Overview■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■68P09286A73 -1 1 -1JUL 2007 PRELIMINARY - UNDER DEVELOPMENT
Introduction Chapter 1: Ov erviewIntroduction■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■This document provides information pertaining to the hardware and cabling installation for theoutdoor and indoor (19 – inch rack) version of theMotorolaGround Based Access P oint (GAP)Hardware.This hardware installation manualdoes not includecard and module placement, applyingpower , tuning, network configuration, software site commissioning, troubleshooting, etcetera.Refer to other associated manuals (product specific documentation, and product enabled, suchas on -line help on the LMT or EMS).1 -2 68P09286A73 -1PRELIMINARY - UNDER DEVELOPMENT JUL 2007
Ground Based Access P oint (GAP) Hardw are Installation Product DescriptionProduct Description■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■TheMotorolaGround – based Access P oint (GAP) hardware is made up of three main componentassemblies; the Base Transceiver (sub) System (BTS) and the Battery Backup Unit (BBU). T woconfigurations are available; an indoor GAP , and an outdoor GAP . The indoor configuration ismounted in a standard 19–inch rack. The outdoor configuration is housed in two (typical)weather resistant cabinets. The outdoor cabinets may be mounted side -by -side, or stackedon top of each other .The GAP BTS includes the Base Control Unit (B CU) cage and Transceiver modules (TRX) cage.The B CU contains signal processing and interface hardware. The TRX module contains aninterface for the B CU , the TX (transmit) and RX (receive) components, and RF interface for theRF antenna(s). The RF interface is an external connection between the TRX module(s) and theRF antenna(s).The GAP BBU (battery cabinet) is typically used in an outdoor configuration. The BBU containsbatteries and/or additional TRX module cages for multi sector configurations. F or indoorconfigurations, the battery supply would come from the battery room at the customer site.68P09286A73 -1 1 -3PRELIMINARY - UNDER DEVELOPMENT JUL 2007
Manual Order Chapter 1: Ov erviewManual Order■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■This section outlines the content of this manual.. The appendices provide additional informationabout installation not otherwise covered in the chapters.Chapter 1 – Overview This is a brief outline of the manual. It also provides a list of additionaldocuments and tools necessary to complete the procedures.Chapter 2 – Site Preparation This chapter contains the information for site verificationand shipping and handling of the hardware.Chapter 3 – Cable Descriptions This chapter contains general information on the cablingavailable for the B CU and RF Head.Chapter 4 – Indoor Ground -based Access P oint (GAP) Hardware InstallationThis chapter contains general information and procedures for installing the indoor (19 - inchrack) version of the Ground -based Access P oint (GAP) ardwareChapter 5 – Outdoor Ground -based Access P oint (GAP) Hardware InstallationThis chapter contains general information and procedures for installing the outdoor (weather -resistant cabinet) version of the Ground -based Access P oint (GAP) ardwareChapter 6– Optional EquipmentChapter 7– What’s Next This chapter contains general information and procedures forinstalling optional equipment.Chapter 8– XXXXXXXXX This chapter contains general information and procedures for siteclean up and installation checklist.Appendix A – Alternate RF Head Installation Procedure This appendix containsgeneral information and alternate procedures for RF Head installation.Appendix B – Alternate RGPS Installation This appendix contains general informationand alternate procedures for RGPS installation.Appendix C – MMI Cable F abrication This appendix contains general information and aprocedure for manufacturing an MMI cable if the SLN2006A Kit is not available.1 -4 68P09286A73 -1PRELIMINARY - UNDER DEVELOPMENT JUL 2007
Ground Based Access P oint (GAP) Hardw are Installation R ecommended DocumentsRecommended Documents■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■The following documents may be required to assist in the installation of the GAP Hardware.•Standards and Guidelines for Communication SitesHard copy (MotorolaP art Number 6881089E50)CD -ROM (MotorolaP art Number 9882904Y01)•Site Document (generated byMotorolaSystems Engineering), which includes:site specific documentationchannel allocationcontact list (customer)ancillary/expendable equipment listsite wiring listscontact list (Motorola support)job box inventory•Demarcation Document (Scope of W ork agreement)•Installation manuals for non -Motorolaequipment (for reference purposes).68P09286A73 -1 1 -5PRELIMINARY - UNDER DEVELOPMENT JUL 2007
Abbreviations and Acron yms Chapter 1: Ov erviewAbbreviations and Acronyms■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■T able 1 -1 lists the uncommon abbreviations and acronyms that appear within this manual.Table 1 -1 Abbreviations and Acron ymsT ermDenitionAPAccess P ointBBUBattery Backup UnitB CUBase Control UnitB CU I/OBase Control Unit Input/OutputBTSBase Transceiver (sub) SystemCB CCircuit Breaker CardDACDirect Air CoolingDAPDiversity Access P ointGAPGround - based Access P ointGPSGlobal P ositioning SystemPSUP ower Supply UnitPSMP ower Supply ModuleRFCU RF Carrier UnitRF GPSRF Global P ositioning System (typically regarding antennas)RGPSRemote Global P ositioning System (typically regardingantennas with powered module / amplifier)TRXTransmit/Receive RF Module1 -6 68P09286A73 -1PRELIMINARY - UNDER DEVELOPMENT JUL 2007
Ground Based Access P oint (GAP) Hardw are Installation T ools and MaterialsTools and Materials■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■IntroductionMany of the tools and materials depend on the GAP installation, being indoor or outdoor . Theindoor GAP is mounted in a standard 19 - inch rack. The outdoor GAP is installed on a concreteslab. T ools and materials also depend on the style of the wall or pole on which the RF Headmounting bracket is being installed. Due to different mounting styles, additional tools andmaterials may be required to meet site specific needs.Tools and MaterialsThe tools and materials listed in T able 1 -2 are generally recommended to properly and safelyperform the various installation procedures. Not all tools will be used in all procedures.Table 1 -2 T ools and MaterialsHand T ool Materials PurposeAdjustable T orque ratchetand metric/standard socketsetCustomer Supplied F or general torquing of bolts and nuts.Cordless P ower Drill, 3/8-inor 1/2-in driveAppropriate wood andmasonry drill bits (Standardset may be adequate)Customer SuppliedDrill holes in wood and light concreteBucklestrap Cutting T ool (Motorola P/N 6604809N01) F or the pole mounting bracketsT ape MeasureCustomer Supplied General purpose measurementTin SnipsCustomer Supplied General purpose metal cuttingSafety Glasses Customer Supplied Eye SafetyKnife or Box Cutter Customer Supplied General purpose cutting13/16 Breakaway T orqueW rench 38-in. lbCustomer SuppliedN ConnectorsCrane or industrial fork lift(must be rated for at least twoton capacity)Customer Supplied Used to transport and support for GAPcabinet(s)Block and T ackle Customer Supplied High - capacity , 4 - point cable with hooks orcarabiners used for transport and support forGAP cabinet(s)No . 2 Blade Screw Driver Customer Supplied General purposeContinued68P09286A73 -1 1 -7PRELIMINARY - UNDER DEVELOPMENT JUL 2007
T ools and Materials Chapter 1: Ov erviewTable 1 -2 T ools and Materials (Continued)Hand T ool Materials PurposeElectrical T ape Customer Supplied General purposeAdjustable Crescent W rench Customer Supplied General purposeT orx Screw Driver Set (T30and lower)Customer Supplied General purposeTie- W rapsCustomer Supplied General purpose, varying lengths.Heat Shrink Tubing Customer Supplied General purpose, varying lengths anddiametersHeat Shrink Gun Customer Supplied General purposeCrimp T ool Customer Supplied Ground wires1 -8 68P09286A73 -1PRELIMINARY - UNDER DEVELOPMENT JUL 2007
C h a p t e r2Site Preparation■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■This chapter provides general information for verification of the site prior to installation ofthe GAP hardware.68P09286A73 -1 2 -1JUL 2007 PRELIMINARY - UNDER DEVELOPMENT
Gener al Chapter 2: Site Prepar ationGeneral■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■All customer sites have unique situations for installation of equipment. Specific site situationsthat affect installation need to be identified, and resolved if necessary , prior to the actualinstallation of any equipment.OverviewThe following sections provide the procedures and information to verify that the site is readyfor equipment installation. It also provides procedures to ensure the safety of the installationpersonnel, protect the equipment from damage, and verify the site layout parameters.Ev ery effort should be made to pro vide a safe working en vironment for all installationand service personnel.Indoor and outdoor sitesBoth indoor and outdoor configurations need to include compliance with local, state and countryelectrical and mechanical codes (building code). While low voltage for main power is typicallyused, proper cabling of the correct specification for power is required. Equipment weight andweight distribution needs to be considered for stable structural mounting. Adequate spacearound the GAP unit is required for proper air flow and maintenance. F or indoor installations,proper room temperature and clean air flow also needs to be considered. F or outdoorinstallations, proper clearance for the cabinet and cabinet doors needs to be considered forthe installation and any subsequent maintenance procedures.2 -2 68P09286A73 -1PRELIMINARY - UNDER DEVELOPMENT JUL 2007
Ground Based Access P oint (GAP) Hardw are Installation Site Prepar ation Ov erviewSite Preparation Overview■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■This section provides the procedures and information to verify that the site is ready forequipment installation. It also provides procedures to ensure the safety of the installationpersonnel, protect the equipment from damage, and verify the site layout parameters.InstallationThe site preparation depends on the type of installation and the site characteristics. The BaseControl Unit (B CU) cage and associated TRX cage(s) may be installed indoors or outdoors.Indoor installations require the use of 19–inch rack (open style). Outdoor installations require aweatherproof enclosure (GAP cabinets). The RF and GPS antennas are cabled from the GAPequipment and are mounted outdoors.Site ManagerThe site manager is the person in charge of and is responsible for the full site.Verication and ProceduresV erifications typically have the installer check with the site manager that a condition has beenpreviously checked or procedure previously performed and meets a stated specification.Inspections typically have the installer personally checking that a condition or item meetsstated specifications.The verifications and procedures provided in this chapter are:•Initial site inspections•Preparing site for the arrival of equipment•Site layout verification68P09286A73 -1 2 -3PRELIMINARY - UNDER DEVELOPMENT JUL 2007
Initial site inspection Chapter 2: Site Prepar ationInitial site inspection■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■This section describes general items to consider for an initial site inspection.Indoor intial site inspectionIndoor site inspections should include considerations for:•General safety inspection to ensure a safe working environment for personnel andprotection of equipment.•Lighting and power for installation and maintenance personnel.•Appropriate general space to install the GAP frame equipment.•A vailability of appropriate electrical ground connections for the GAP equipment.•Access to, and routing of; input power , RF output, and general interconnection cablingspace for the rack mounted equipment.•A vailability of appropriate rated input power; battery or main line voltage and current.•Minimum distance to access the front and rear of the GAP equipment.•Minimum distance for air flow circulation around the GAP equipment.•Level surface and enough floor support to handle the weight of the GAP equipment,frame, and cabling.•Staging area for equipment arrival, unpacking, and transportation equipment for movingthe GAP equipment.•Compliance with any site engineering documentation and specifications.Outdoor initial site inspectionOutdoor site inspections should include considerations for:2 -4 68P09286A73 -1PRELIMINARY - UNDER DEVELOPMENT JUL 2007
Ground Based Access P oint (GAP) Hardw are Installation Initial site inspection•General safety inspection to ensure a safe working environment for personnel andprotection of equipment.•Lighting and power for installation and maintenance personnel.•Configuration of the GAP cabinets, either side - by - side or stacked.•Appropriate general space to install the GAP cabinets.•A vailability of appropriate electrical ground connections for the GAP equipment.•Access to, and routing of; input power , RF output, and general interconnection cablingspace for the GAP cabinets.•A vailability of appropriate rated input power; battery or main line voltage and current.•Configuration and position of the concrete pad(s) to mount GAP cabinets.•Level surface and the appropriate weight bearing characteristics of the concrete pad(s).•Mounting structure for cable routing or environmental conditions; direct concretemounting or with bottom I -beam support.•Minimum distance to access the front and rear of the GAP equipment.•Minimum clearance to open doors and panels on the front and rear of the GAP cabinets.•Minimum distance for air flow circulation around the GAP equipment.•Staging area for equipment arrival, unpacking, and transportation equipment for movingthe GAP cabinets..•Compliance with any site engineering documentation and specifications.68P09286A73 -1 2 -5PRELIMINARY - UNDER DEVELOPMENT JUL 2007
Prepare Site for Equipment Arriv al Chapter 2: Site Prepar ationPrepare Site for Equipment Arrival■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■This section covers various topics not all of which are needed at every site. Based on the sitecharacteristics, execute the steps that apply to your site. Before installing the equipment, do thefollowing to ensure the safety of installation personnel and to protect the equipment.DescriptionThis information covers various topics not all of which are needed at every site. Based on thesite characteristics execute the steps that apply to your site. Before installing the equipment, dothe following to ensure the safety of installation personnel and to protect the equipment.Equipment ArrivalBefore the equipment arrives, indicate to the transport company an area (staging area) atthe site where the equipment can be unloaded and, if necessary , unpacked. The equipmentshould be carefully delivered to the site, along with all equipment dollies and padding requiredto safely move the equipment from the unloading area to the installation site. The followingshould also be provided, outdoor weather protection, temporary lighting and power for lightingand power tools.Procedure to prepare the site for the equipmentProcedure 2 -1 Procedure to prepare the site for the GAP equipment1Consult with the site manager .2Locate the outdoor demarcation blocks for external (or internal, for rackinstallations) utilities. V erify that they are shown on any site engineeringdocuments, and determine the required cable routing back to the equipmentframes.3V erify the following:•AC or battery power is available and meets the site documentationspecifications•Concrete pad, floor , outdoor pole and/or wall mounting structures areinstalled (if needed) and meet specifications in the site engineeringdocuments•Outdoor cable runs are installed and meet local building codes•Customer input termination tie points are availableContinued2 -6 68P09286A73 -1PRELIMINARY - UNDER DEVELOPMENT JUL 2007
Ground Based Access P oint (GAP) Hardw are Installation Prepare Site for Equipment Arriv alProcedure 2 -1 Procedure to prepare the site for the GAP equipment (Continued)•There is clear access to move the equipment to the desired mountingarea•There is sufficient space for installation and service access to theequipment•Customer supplied shelters (if needed) are installed4Note any concerns or conditions that may create a safety hazard to personnel,or impair the installtion of the GAP equipment.568P09286A73 -1 2 -7PRELIMINARY - UNDER DEVELOPMENT JUL 2007
Site la y out inspection Chapter 2: Site Prepar ationSite layout inspection■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■Most of the site layout should have been inspected in the previous sections, and any specialconditions noted. Consult with the site manager to resolve any outstanding condition thatwould impair the installation or safety of personnel. Correct all conditions and note any specialinstructions needed to install the GAP equipment. V erify with the site manager that any specialinstructions are related to the appropriate installation personnel.2 -8 68P09286A73 -1PRELIMINARY - UNDER DEVELOPMENT JUL 2007
Ground Based Access P oint (GAP) Hardw are Installation Shipping and HandlingShipping and Handling■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■OverviewThe purpose of this section is to describe how the GAP Base Transceiver (sub) System (BTS)(includes the B CU and TRX), Battery Backup Unit (BBU) and RF Head are packaged for shippingand how to correctly unpack the units in preparation for installation.How Equipment is ShippedThe pallets containing the GAP equipment are hea vy and require the use of anindustrial fork -lift truck. F or the outdoor GAP cabinet, the fork lift truck should ber ated to handle at least two tons.The GAP can be shipped in several configurations. The outdoor GAP is shipped as two units(typically as a BTS and a BBU). Both the GAP BTS and the GAP BBU are shipped on separatepallets with cardboard box coverings. The indoor GAP is packaged as separate containers incardboard boxes strapped to a pallet. Plastic wrapping is used to encase the units and provideprotection as well as securing the units to the pallets.F or indoor configurations, the B CU , and TRX cages, and other required and optional equipment,will be shipped in separate containers or on separate pallets. The containers, if used, will eitherbe wood or cardboard, with packing material to protect the units.F or the indoor GAP :•The B CU cage is shipped with all cards/modules and internal cabling installed.•The TRX cage is shipped with all cards/modules and internal cabling installed.F or the outdoor GAP :68P09286A73 -1 2 -9PRELIMINARY - UNDER DEVELOPMENT JUL 2007
Shipping and Handling Chapter 2: Site Prepar ation•The BTS cabinet is shipped with the B CU cage with all cards/modules and internal cablinginstalled.•The BBU cabinet is shipped with all batteries and internal cabling installed.•Depending on the ordered configuration, the TRX cage can be in either the BTS cabinetand / or the BBU cabinet.•The TRX cage, with the installed TRX modules, will have all internal cabling installed.How Equipment ArrivesBefore the equipment arrives, indicate to the transport company an area at the site where theequipment can be unloaded and, if necessary , unpacked. The equipment should be carefullydelivered to the site, along with all equipment fork lift, dollies and padding required to safelymove the equipment from the unloading area to the cell site. The site should also have outdoorweather protection and power for temporary lighting and power tools.Recommended Unpacking ToolsThe following tools are recommended to assist in opening the containers housing the equipment:•Tin snips.•Knife, box cutter , or scissors.2 -10 68P09286A73 -1PRELIMINARY - UNDER DEVELOPMENT JUL 2007
Ground Based Access P oint (GAP) Hardw are Installation UnpackingUnpacking■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■This section describes unpacking the various units for the GAP .GAP equipmentThe GAP equipment is shipped either as and indoor unit and as an outdoor unit. The indoor unitincludes the B CU and TRX cages and is designed to fit in a standard 19–inch rack. The outdoorunit is comprised of two outdoor cabinets, the BTS and BBU . Both the BTS and BBU cabinets arepre -configured per order , and shipped with the internal cabling included.Outdoor GAPInstallation of the two outdoor cabinets (BTS and BBU) mainly consists of mounting the unit,grounding cabling, main power cabling, cabling between cabinets and cabling between theTRX modules and the RF antennas.68P09286A73 -1 2 -11PRELIMINARY - UNDER DEVELOPMENT JUL 2007
Unpacking Chapter 2: Site Prepar ationFigure 2 -1 GAP cabinet - lifting and mounting br ack et locationsPRELIMINARY ILLUSTRATIONUnpacking procedureProcedure 2 -2123452 -12 68P09286A73 -1PRELIMINARY - UNDER DEVELOPMENT JUL 2007
Ground Based Access P oint (GAP) Hardw are Installation UnpackingIndoor GAPThe indoor B CU and TRX cages are internally cabled and installation mainly consists ofmounting the cages in the indoor rack, grounding cabling, main power cabling, cabling betweenthe cages, and cabling between the TRX modules and the RF antenna(s).Unpacking procedureProcedure 2 -31234568P09286A73 -1 2 -13JUL 2007 PRELIMINARY - UNDER DEVELOPMENT
Unpacking Chapter 2: Site Prepar ation2 -14 68P09286A73 -1PRELIMINARY - UNDER DEVELOPMENT JUL 2007
C h a p t e r3Cable Descriptions■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■Individual installations at customer sites vary . This chapter describes the typical cabling for theGAP .68P09286A73 -1 3 -1JUL 2007 PRELIMINARY - UNDER DEVELOPMENT
Ov erview Chapter 3: Cable DescriptionsOverview■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■This chapter provides the descriptions of the site cabling.Procedures for routing cables (through metallic or conductive conduit) to the outdoor equipmentare found in Chapter 4 Indoor GAP Hardware Installation .Cabling is one of the most noticeable aspects of workmanship. Straight runs andproper turns are critical for a positive evaluation of the work.3 -2 68P09286A73 -1PRELIMINARY - UNDER DEVELOPMENT JUL 2007
Ground Based Access P oint (GAP) Hardw are Installation Congur ations SupportedCongurations Supported■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■This chapter supports cable installation for 3 and 4 sector configurations.68P09286A73 -1 3 -3PRELIMINARY - UNDER DEVELOPMENT JUL 2007
Cable Installation Order Chapter 3: Cable DescriptionsCable Installation Order■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■1. Ground Cabling2. P ower Cabling3. Antenna Cabling4. RGPS or Local GPS Cabling5. Ethernet Cabling6. Fiber Optic Cabling7. Customer Defined Input/Output Cabling3 -4 68P09286A73 -1PRELIMINARY - UNDER DEVELOPMENT JUL 2007
Ground Based Access P oint (GAP) Hardw are Installation Cable Descriptions and P art NumbersCable Descriptions and Part Numbers■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■T able 3 -1 gives the cable descriptions and part numbers of the various cables that connect theGAP Base Control Unit (B CU), the GAP Battery Backup Unit (BBU), the GPS antenna, and theRF head.Table 3 -1 Cable Length R equirementsCable QtyPart Number DescriptionA2Customer Supplied Ground cable, 6 A WG or larger ,insulated copper wire.B2–8 3089492T02Antenna Cable, 300 mm (1 ft.)C 1 T472AARGPS cable, 15 m (50 ft.)T472ABRGPS cable, 38 m (125 ft.)T472ACRGPS cable, 76 m (250 ft.)T472ADRGPS cable, 152 m (500 ft.)T472AERGPS cable, 304 m (1000 ft.)T472AFRGPS cable, 608 m (2000 ft.)C1 1P art of Motorola Kit.D1 SGRG4030ACGDSGPSKITF4NM50Assembly , Receiver , GPS , RF ModuleAntenna, GPS , with mounting and 50ft. cable.E2Customer Supplied AC P ower Cable, 10 A WG , copperDC P ower Cable,F1 SGLN6414AAssembly , Installation, InstallationHDW Pkg B CUG 1–4 3089298C01RF Head DC P ower Cable, 20 m (65.6ft)3089298C02RF Head DC P ower Cable, 40 m (131.2ft)3089298C03RF Head DC P ower Cable, 60 m (196.8ft)3089298C04RF Head DC P ower Cable, 80 m (262.4ft)3089298C05RF Head DC P ower Cable, 100 m(328.0 ft)H1–4 3089843T01Fiber Optic Cable, 20 m (65.6 ft)3089843T02Fiber Optic Cable, 40 m (131.2 ft)Continued68P09286A73 -1 3 -5PRELIMINARY - UNDER DEVELOPMENT JUL 2007
Cable Descriptions and P art Numbers Chapter 3: Cable DescriptionsTable 3 -1 Cable Length R equirements (Continued)Cable QtyPart Number Description3089843T03Fiber Optic Cable, 60 m (196.8 ft)3089843T04Fiber Optic Cable, 80 m (262.4 ft)3089843T05Fiber Optic Cable, 100 m (328.0 ft)J6Customer Supplied Ethernet cables, RJ-45 connectors,straightK1 GCNTM20A3ACGDSVXL550FSJ4–50B)Assembly , Receiver , GPS , RF ModuleAntenna, GPS , withmounting and 50 ft. cable.Antenna cable from Surge Arrestor(Customer supplied) to B CUL1 SGKN4386Punch block to B CU I/O board, 15–pinD -connector on one end and loosewires on the other end. Cable isMotorola P/N 3086433H12M1Customer Supplied DC power cable, 8–10 A WG , 10 m3 -6 68P09286A73 -1PRELIMINARY - UNDER DEVELOPMENT JUL 2007
Ground Based Access P oint (GAP) Hardw are Installation Cable LengthsCable Lengths■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■T able 3 -2 gives the typical lenghts of the various cabling.Table 3 -2 Cable LengthsFrom T oCable Cable LengthB CU DC SourceRF Head DC ConnectorG5 lengths, 20 to 100 m in 20 mincrements (65.6 to 328 ft)B CU RF ConnectorRF Head RF ConnectorB300 mm (1 ft)BBU DC Source B CU / TRXAC SourceBBU Customer InterfaceCompartmentELength as required.DC SourceBBU Customer InterfaceCompartmentELength as required.Customer OutputSourceB CU Customer InterfaceCompartmentFLength as required.68P09286A73 -1 3 -7JUL 2007 PRELIMINARY - UNDER DEVELOPMENT
Cable Lengths Chapter 3: Cable Descriptions3 -8 68P09286A73 -1PRELIMINARY - UNDER DEVELOPMENT JUL 2007
C h a p t e r4Indoor GAP Hardware Installation■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■This chapter describes guidelines for installing the GAP hardware in an indoor rack.68P09286A73 -1 4 -1JUL 2007 PRELIMINARY - UNDER DEVELOPMENT
Indoor (r ack - mount) GAP installation Chapter 4: Indoor GAP Hardw are InstallationIndoor (rack - mount) GAP installation■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■This section provides information to install the Ground - based Access P oint (GAP) in an indoorenvironment. This requires the use of a standard 19 - inch rack.GAP rack - mount cagesCards, modules, and batteries are installed separately in the GAP cages after the cages aremounted in a standard 19 - inch rack. Installation of the cards, modules, and batteries arecustomer site dependent, and are not specifically covered in this manual.4 -2 68P09286A73 -1PRELIMINARY - UNDER DEVELOPMENT JUL 2007
Ground Based Access P oint (GAP) Hardw are Installation Indoor GAP product identicationIndoor GAP product identication■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■his section shows the various configuration for indoor GAP cabinets.BCU Cage and componentsTRX cage and components68P09286A73 -1 4 -3PRELIMINARY - UNDER DEVELOPMENT JUL 2007
R ack mounting congur ation Chapter 4: Indoor GAP Hardw are InstallationRack mounting conguration■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■This section shows the typical mounting configuration of the GAP cages in a standard 19 -inch rack.GAP rack mounting (typical)4 -4 68P09286A73 -1PRELIMINARY - UNDER DEVELOPMENT JUL 2007
Ground Based Access P oint (GAP) Hardw are Installation Mounting and bolt congur ationsMounting and bolt congurations■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■This section describes different mounting bolt configurations and isolation considerations forboth indoor and outdoor GAP installations.Ev ery effort should be made to pro vide a safe working en vironment for all installationand service personnel.The pallets containing the GAP equipment are hea vy and require the use of anindustrial fork -lift truck. F or the outdoor GAP , the fork lift truck should be r ated tohandle at least two tons (2000 lbs or 1000 kg).Mounting hardwareHilti BoltThe Hilti bolt is a concrete anchor and bolt. This is shown below in Figure 4 -1Isolation washerThe GAP cabinet(s) or rack floor mounting is typically isolated using nylon isolation washers,and isolation pads bonded to the GAP floor mounting brackets. The islolation washer is shownas optional parts in Figure 4 -1 and Figure 4 -2 . The isolation washer depicted in the figures iscombination washer and bushing.Motorolarecommends that the isolation washer be used,particularly for ease of installation, vibration supression, and particularly for maintainingelectrical ground isolation.It may be necessary to ensure grounding isolation on an indoor GAP configuration using a rack.The rack floor mounting hardware may need to be modified slighly (hole mounting diameter)for the inclusion of the isolation washer . Additional isolation pads for the rack floor mountingtabs may also be necessary .68P09286A73 -1 4 -5PRELIMINARY - UNDER DEVELOPMENT JUL 2007
Mounting and bolt congur ations Chapter 4: Indoor GAP Hardw are InstallationInstallation on concreteConcrete mounting is used in an outdoor GAP configuration. The same mounting can be usedfor an indoor rack mounting on a concrete floor .Due to the weight of the GAP cabinet, the supporting structure (concrete slab) mustbe able to withstand at least 1000 lbs (500 kg).Refer to Figure 4 -1 for a typical cross - section of the concrete bolt mounting to the GAP cabinetor rack mounting brackets.Figure 4 -1 Concrete mountingti-cdma-05742-cnc.epsCONCRETEHILTI-BOLTHSL-3M 8/20LARGE FLATWASHER MOUNTINGBRACKETISOLATIONPAD(AFFIXED TOBRACKET)OPTIONALISOLATIONWASHERPRELIMINARY ILLUSTRATIONInstallation on wooden oorW ooden floor mounting is typically used in an indoor GAP , rack mounting configuration.4 -6 68P09286A73 -1PRELIMINARY - UNDER DEVELOPMENT JUL 2007
Ground Based Access P oint (GAP) Hardw are Installation Mounting and bolt congur ationsDue to the weight of the GAP components and r ack, the supporting structure (oordeck) must be able to withstand at least 1000 lbs (500 kg). A structur al oor support,such as an iron I -beam, underneath the wooden oor is recommended.Refer to Figure 4 -2 for a typical cross - section of the wooden floor bolt mounting to the GAPcabinet or rack mounting brackets.Figure 4 -2 W ooden oor mountingti-cdma-05743-wd.epsSMALL FLATWASHERM12 X 100 BOLT INSULATING WASHER(OPTIONAL)LARGE FLATWASHERMOUTINGBRACKETISOLATIONPADMOUNTINGSTRUCTURE(I BEAM) M12 NUTLOCK WASHERSMALL FLATWASHER(AFFIXED TOBRACKETS)PRELIMINARY ILLUSTRATION68P09286A73 -1 4 -7PRELIMINARY - UNDER DEVELOPMENT JUL 2007
Installation of GAP cages in the indoor r ack Chapter 4: Indoor GAP Hardw are InstallationInstallation of GAP cages in the indoor rack■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■BCU cageTRX cage4 -8 68P09286A73 -1PRELIMINARY - UNDER DEVELOPMENT JUL 2007
Ground Based Access P oint (GAP) Hardw are Installation R ack cabling with cages installedRack cabling with cages installed■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■Cage to cageExternal cabling to rack68P09286A73 -1 4 -9JUL 2007 PRELIMINARY - UNDER DEVELOPMENT
R ack cabling with cages installed Chapter 4: Indoor GAP Hardw are Installation4 -10 68P09286A73 -1PRELIMINARY - UNDER DEVELOPMENT JUL 2007
C h a p t e r5Outdoor GAP Hardware Installation■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■This chapter describes guidelines for installing the GAP hardware cabinets in an outdoorenvironment.68P09286A73 -1 5 -1JUL 2007 PRELIMINARY - UNDER DEVELOPMENT
Outdoor (cabinet - mount) GAP installation Chapter 5: Outdoor GAP Hardw are InstallationOutdoor (cabinet - mount) GAP installation■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■This section provides general information to install the Ground - based Access P oint (GAP) in anoutdoor environment. Each customer installation will vary . All outdoor GAP installations requirethe use of a 5 - ft by 7 - ft concrete slab capable of supporting one ton (2000 lbs or 900 kg). Side- by - side cabinets will require the use of two 5 - ft by 7 - ft concrete slabs.GAP cabinetsThe GAP cabinet comes pre -loaded with hardware cages. Cards, modules, and batteries areinstalled separately in the GAP cages after the main mounting to a concrete or other support (re- enforced floor) surface. Installation of the cards, modules, and batteries are customer sitedependent, and are not specifically covered in this manual.The GAP cabinets are hea vy . The use of a cr ane and / or hoisting system that is r atedto handle at least two tons (4000 lbs or 1800 kg) is recommended. A four -pointhoisting cable with appropriate hooks or car abiners should be used to unload the GAPcabinet from the shipping pallet to the area of nal installation.5 -2 68P09286A73 -1PRELIMINARY - UNDER DEVELOPMENT JUL 2007
Ground Based Access P oint (GAP) Hardw are Installation Outdoor GAP product identication and congur ationsOutdoor GAP product identication and congurations■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■The following sections outline general mounting configurations for the GAP product. Thissection also discusses common considerations when installing an outdoor GAP .Common outdoor mounting informationThis section outlines consideration common to any GAP outdoor installation. Concrete mountingand general clearance information is provided.Stacked GAP cabinet congurationThis section shows how a typical GAP is configured as a pair of stacked cabinets.Side - by - side GAP cabinet congurationThis section shows how a typical GAP is configured as a pair of side - by - side cabinets.68P09286A73 -1 5 -3PRELIMINARY - UNDER DEVELOPMENT JUL 2007
GAP concrete slab mounting Chapter 5: Outdoor GAP Hardw are InstallationGAP concrete slab mounting■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■This section shows the typical mounting used on a concrete slab for the outdoor GAP cabinet(s).This section also applies to mounting the cabinets on a concrete floor as well.Installation PlanningSince customer site configurations vary , the mounting of the GAP cabinet on a concrete slab willvary . The installation needs careful planning before installing the GAP cabinet(s). Customer sitephysical dimensions, cabinet ventilation, adequate air space around the equipment, minimumcabinet door clearance and power routing all contribute to how to plan out the installation. F orutility mains power (AC power), local and country electrical code rules must also be taken intoconsideration when planning the installation.Concrete slab congurationsF or a single cabinet, a 5 ft by 7 ft concrete slab is required. This also is the basic footprint of thedoor clearance needed around the GAP cabinet, when the cabinet is mounted in the center ofthe concrete pad as viewed from the top of the GAP cabinet.5 -4 68P09286A73 -1PRELIMINARY - UNDER DEVELOPMENT JUL 2007
Ground Based Access P oint (GAP) Hardw are Installation GAP concrete slab mountingFigure 5 -1 Single cabinet mountingPRELIMINARY ILLUSTRATION68P09286A73 -1 5 -5PRELIMINARY - UNDER DEVELOPMENT JUL 2007
GAP concrete slab mounting Chapter 5: Outdoor GAP Hardw are InstallationFigure 5 -2 Dual cabinet mountingPRELIMINARY ILLUSTRATIONCabinet mountingDepending on how the external power and interconnections are run to the cabinets, this willdetermine if the GAP cabinets are mounted on a support between the concrete slab and thecabinet(s). Routing of the external power and interconnections between the cabinets is throughthe cabinet rear or underside of the cabinet. All external connection from a GAP cabinet isthrough the BTS cabinet, namely the “mud room”. Figure 5 -3 shows the location of the mudroom area on the BTS cabinet.5 -6 68P09286A73 -1PRELIMINARY - UNDER DEVELOPMENT JUL 2007
Ground Based Access P oint (GAP) Hardw are Installation GAP concrete slab mountingFigure 5 -3 GAP B T S cabinet “mud room”PRELIMINARY ILLUSTRATIONConduit routed through back of BTS cabinetFigure 5 -4 shows the conduit routed through the back of the BTS cabinet. This will not require asupport between the cainet and the conrete slab. The cabinet may be mounted directly to theconcrete slab.68P09286A73 -1 5 -7PRELIMINARY - UNDER DEVELOPMENT JUL 2007
GAP concrete slab mounting Chapter 5: Outdoor GAP Hardw are InstallationFigure 5 -4 “Mud room” conduit routed through back of B T S cabinetPRELIMINARY ILLUSTRATIONConduit routed through bottom of BTS cabinetFigure 5 -5 shows the conduit routed through the bottom of the BTS cabinet. This will require asupport between the cainet and the conrete slab.5 -8 68P09286A73 -1PRELIMINARY - UNDER DEVELOPMENT JUL 2007
Ground Based Access P oint (GAP) Hardw are Installation GAP concrete slab mountingFigure 5 -5 “Mud room” conduit routed through bottom of B T S cabinetPRELIMINARY ILLUSTRATIONI -beam supportT o elevate the GAP cabinet from the concrete mounting, an I -beam support can be used. ThreeI -beams are required for even support of the GAP cabinet. This description uses a 12 - inchI -beam to allow clearance for a 90 - degree flexible conduit bend. F or utility mains power (ACpower), local and country electrical code rules must also be taken into consideration for aminimum clearance bend.X and Y show typical supports for the GAP cabinets. Note that all installations require mid -support of the cabinet.68P09286A73 -1 5 -9PRELIMINARY - UNDER DEVELOPMENT JUL 2007
GAP concrete slab mounting Chapter 5: Outdoor GAP Hardw are InstallationFigure 5 -6 I -beam support for a single GAP cabinetPRELIMINARY ILLUSTRATIONFigure 5 -7 I -beam support for two GAP cabinetsPRELIMINARY ILLUSTRATION5 -10 68P09286A73 -1PRELIMINARY - UNDER DEVELOPMENT JUL 2007
Ground Based Access P oint (GAP) Hardw are Installation Outdoor mounting and bolt congur ationsOutdoor mounting and bolt congurations■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■The mounting of a GAP cabinet to an outdoor concrete slab is similar to mounting an indoor GAPframe to a concrete floor . The same techniques are used. The use of plated or painted bolts isrecommended in the outdoor setting to resist rust.Please refer to Mounting and bolt configurations on page 4 - 5 for information pertaining tothis topic.68P09286A73 -1 5 -11PRELIMINARY - UNDER DEVELOPMENT JUL 2007
Concrete pad installation and ground system Chapter 5: Outdoor GAP Hardw are InstallationConcrete pad installation and ground system■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■Materials neededAlso see the tools list in the beginning of this manual.Table 5 -1 Gener al materials neededQuantityDescriptionProcedure 5 -1 Concrete pad and ground system Installation procedure12345Ground system5 -12 68P09286A73 -1PRELIMINARY - UNDER DEVELOPMENT JUL 2007
Ground Based Access P oint (GAP) Hardw are Installation Concrete pad installation and ground systemFigure 5 -8 Ground ring la y outti-cdma-01749.epsCONCRETEPADGROUNDING RING #3 BSWG(#2 AWG;35 mm2) SOLIDCOPPER W/TIN COATING2438 mm(96IN.)GROUNDRODS (8−12)GROUND TO CABINET (1 PER CABINET) #3 BSWG(#2 AWG;35 mm2) SOLID COPPER W/TIN COATINGGROUND TO ANTENNA#3 BSWG (#2 AWG; 35mm2) SOLID COPPERW/TIN COATING609 mm(2’ 0IN.)GROUND TO REBAR(CADWELD)609 mm(2’ 0IN.)REBAR JOINTS(CADWELD) (4)609 mm(2’ 0IN.)REBAR10 mm (3/8IN.)MINIMUM.FRONTGROUND TO CABINET (1 PER CABINET) #3 BSWG (#2AWG;35 mm2) SOLID COPPER W/TIN COATING609 mm(2’ 0IN.)Conduit routing through concrete slabConduit routing is customer site dependant. This section is included here for installations thatuse conduit routing integral to the concrete slab.Figure 5 -9 Conduit stub in concrete slabti-cdma-01750.epsCONDUIT STUBS ARETO BE 25 TO 50 MM (1IN.TO 2IN.) ABOVECONCRETE PAD.CONCRETEPAD68P09286A73 -1 5 -13PRELIMINARY - UNDER DEVELOPMENT JUL 2007
GAP side - b y - side congur ation Chapter 5: Outdoor GAP Hardw are InstallationGAP side - by - side conguration■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■This section shows a typical installation of the GAP side - by - side cabinet configuration.Side - by - side cabinetsFigure 5 -10 GAP cabinetsPRELIMINARY ILLUSTRATION5 -14 68P09286A73 -1PRELIMINARY - UNDER DEVELOPMENT JUL 2007
Ground Based Access P oint (GAP) Hardw are Installation GAP stack ed congur ationGAP stacked conguration■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■Stacked cabinetsFigure 5 -11 GAP cabinetsPRELIMINARY ILLUSTRATION68P09286A73 -1 5 -15PRELIMINARY - UNDER DEVELOPMENT JUL 2007
GAP Cabinet cabling Chapter 5: Outdoor GAP Hardw are InstallationGAP Cabinet cabling■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■GroundingCabling between cabinetsExternal cabling to cabinetsOther cabling5 -16 68P09286A73 -1PRELIMINARY - UNDER DEVELOPMENT JUL 2007
C h a p t e r6Optional Equipment■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■68P09286A73 -1 6 -1JUL 2007 PRELIMINARY - UNDER DEVELOPMENT
GAP Cabinet cabling Chapter 6: Optional Equipment6 -2 68P09286A73 -1PRELIMINARY - UNDER DEVELOPMENT JUL 2007
C h a p t e r7What’s Next and Cleanup■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■68P09286A73 -1 7 -1JUL 2007 PRELIMINARY - UNDER DEVELOPMENT
Introduction Chapter 7: What ’ s Next and CleanupIntroduction■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■This section describes general information regarding the final steps of the installation.These are:•Clean up the site•Fill out the installation completion checklist•Optimize the systemClean up the siteClean up the site by following the information given in theSite Cleanupsection in this chapter .Installation checklistA fter the site is cleaned up, fill out the installation completion checklist. This checklist is locatedin theInstallation Completion Checklistsection of this chapter .Optimize the systemOptimize the system by following the procedures given in the appropriate optimization andother associated manuals (product specific, and product enabled, such as on -line help on theLMT or EMS).This hardware installation manual does not include card and module placement, applying power ,tuning, network configuration, software site commissioning, troubleshooting, etcetera.7 -2 68P09286A73 -1PRELIMINARY - UNDER DEVELOPMENT JUL 2007
Ground Based Access P oint (GAP) Hardw are Installation Site CleanupSite Cleanup■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■Tools and storagePlace all hand and power tools in the installation tool kit or other appropriate place. Note anytools that need replacement, cleaning, or adjustment. K eep any tools unique to theMotorolaequipment either at the site, or in an appropriate safe place for later use if needed, as specifiedby the site manager .T ools unique to theMotorolasite equipment can include, but are not limited to:•K eys•SpecialMotorola– supplied tools, such as a single -purpose security socket wrench•Other third -party installation tools unique to the installation of the site equipmentMaterials storagePlace any leftover (usable) materials in a location specified by the site manager .Debris cleanupRemove any packing material. Ensure that all scrap materials have been removed. Clean/sweepthe floor . Ensure that all chalk line marks have been removed..Appropriately dispose of anyhazardous waste as specified by the site manager .EnvironmentOrganize any items (manuals, materials, etc.) left on site and place them in a location specifiedby the site manager .Other items unique to theMotorolasite equipment can include, but are not limited to:68P09286A73 -1 7 -3PRELIMINARY - UNDER DEVELOPMENT JUL 2007
Site Cleanup Chapter 7: What ’ s Next and Cleanup•Check for any safety hazards and correct if necessary as specified by the site manager .•Site specific documentation•Product manuals•Other third -party installation documentation•A copy of the installation checklist provided in this manual7 -4 68P09286A73 -1PRELIMINARY - UNDER DEVELOPMENT JUL 2007
Ground Based Access P oint (GAP) Hardw are Installation Installation checklistInstallation checklist■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■This section provides agenerallist of items to be checked upon the completion of the siteinstallation.Installation completion checklistFill in and check the items listed in the Installation completion checklist on page 7 - 5 , (below)comprised of T able 7 -1 and T able 7 -2DirectionsIf this manual is provided in electronic form, print out the following installation checklist. If apaper copy is provided, you may want to make a copy before filling out the checklist so that itis separate from this manual. Refer to the site manager . Fill out the installation completionchecklist and make any necessary copies. Make copies of this checklist as needed. The itemnumbers listed in T able 7 -2 do not represent a specific order , they are supplied for convenience.Installation completion checklistSome of the follwoing site information may not be available, such as a model number . Include ashort description of the site information as specified by the site manager .Table 7 -1 Site informationSite informationItem entryHardware installation completiondate:Site: (name and description)Serial number(s):Model number(s):Checklist completed by:Checklist reviewed by:68P09286A73 -1 7 -5PRELIMINARY - UNDER DEVELOPMENT JUL 2007
Installation checklist Chapter 7: What ’ s Next and CleanupTable 7 -2 ChecklistItemno.Item Notes1Equipment is not damaged.2Air flow clearance requirementsare met.Door opening clearancerequirements are met.3If indoor installation; GAP rackis securely mounted to floor .If outdoor installation; GAPcabinet(s) is securely mounted tofloor or concrete slab.If outdoor installation; GAPcabinet(s) that are stacked aresecurely mounted together .If outdoor installation; GAPcabling and conduit betweencabinets meet local coderequirments (for utility power),and are installed correctly .Flexible and rigid conduit is notstressed.4B CU and RF Carrier Unit (RFCU)are RF cabled correctly .5B CU and RFCU are DC powercabled correctly .6B CU is ethernet cabled(if installed).Fiber optic, power and RF (ifrequired) cable between RF headand GAP is installed correctly .7RF head is securely mounted topole.RF head is correctly cabled.8Band pass filters are cabled toRFCU correctly (if used).9Conduit is sufficiently grounded.10Antennas are grounded to tower .11The antenna cables are protectedby lightning arrestors (ifapplicable).12GAP is grounded.Continued7 -6 68P09286A73 -1PRELIMINARY - UNDER DEVELOPMENT JUL 2007
Ground Based Access P oint (GAP) Hardw are Installation Installation checklistTable 7 -2 Checklist (Continued)Itemno.Item Notes13RF Head is grounded.14RGPS is cabled to B CU .15RGPS head and mast are secure.16RGPS connection is protectedby lightning arrestors (ifapplicable).17RGPS head has a clear view ofthe sky and is not in a locationwhich accumulates debris. Makesure the RGPS is located awayfrom the transmit antennas.18Local GPS (RF GPS) antenna issecure (if used).19Local GPS cabling is installed (ifused).20Installation hardware isremoved.21The site is cleaned, swept andtrash removed.22The site specific documentationis present at the site.23This installation checklist ispresent at the site.68P09286A73 -1 7 -7JUL 2007 PRELIMINARY - UNDER DEVELOPMENT
Installation checklist Chapter 7: What ’ s Next and Cleanup7 -8 68P09286A73 -1PRELIMINARY - UNDER DEVELOPMENT JUL 2007
C h a p t e r8XXXXXXXXXXXX■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■68P09286A73 -1 8 -1JUL 2007 PRELIMINARY - UNDER DEVELOPMENT
Installation checklist Chapter 8: XXXXXXXXXXXX8 -2 68P09286A73 -1PRELIMINARY - UNDER DEVELOPMENT JUL 2007
C h a p t e r9XXXXXXXXXXXX■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■68P09286A73 -1 9 -1JUL 2007 PRELIMINARY - UNDER DEVELOPMENT
Installation checklist Chapter 9: XXXXXXXXXXXX9 -2 68P09286A73 -1PRELIMINARY - UNDER DEVELOPMENT JUL 2007
C h a p t e r1 0XXXXXXXXXXXX■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■68P09286A73 -1 10 -1JUL 2007 PRELIMINARY - UNDER DEVELOPMENT
Installation checklist Chapter 10: XXXXXXXXXXXX10 -2 68P09286A73 -1PRELIMINARY - UNDER DEVELOPMENT JUL 2007
C h a p t e r1 1XXXXXXXXXXXX■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■68P09286A73 -1 11 -1JUL 2007 PRELIMINARY - UNDER DEVELOPMENT
Installation checklist Chapter 11: XXXXXXXXXXXX11 -2 68P09286A73 -1PRELIMINARY - UNDER DEVELOPMENT JUL 2007
A p p e n d i xAAlternate RF Head Installation Procedure68P09286A73 -1 A -1JUL 2007 PRELIMINARY - UNDER DEVELOPMENT
A -2 68P09286A73 -1PRELIMINARY - UNDER DEVELOPMENT JUL 2007
A p p e n d i xBAlternate RGPS Installation68P09286A73 -1 B -1JUL 2007 PRELIMINARY - UNDER DEVELOPMENT
B -2 68P09286A73 -1PRELIMINARY - UNDER DEVELOPMENT JUL 2007
A p p e n d i xCMMI Cable Fabrication68P09286A73 -1 C -1JUL 2007 PRELIMINARY - UNDER DEVELOPMENT

Navigation menu