Nokia of America BBTRX-15 LTE TD-RRH8X20-25 User Manual EXHIBIT 3

Alcatel-Lucent USA Inc. LTE TD-RRH8X20-25 EXHIBIT 3

Exhibit D Users Manual per 2 1033 c3

APPLICANT: Alcatel-Lucent FCC ID: AS5BBTRX-15Alcatel-LucentUse pursuant to Company InstructionsUSERS MANUALSection 2.1033(C)(3)
APPLICANT: Alcatel-Lucent FCC ID: AS5BBTRX-15Alcatel-LucentUse pursuant to Company InstructionsUSERS MANUALSECTION 2.1033(c) (3)A copy of the installation and operating instructions to be furnished the user. A draft copy of the instructions may be submitted if the actual document is not available. The actual document shall be furnished to FCC when it becomes available.RESPONSE:A copy of TD-RRH8X20-25 User Manual is attached
Alcatel-LucentTD-RRH8X20-25User Manual_________________________________________________________________________________________Document Number: TDD-LTEDocument Issue: 01.00/ ENDocument Status: StandardDate of Issue: 06/Dec/2013_________________________________________________________________________________________
TD-RRH8X20-25 PRODUCT DESCRIPTION DEC 2013Document Issue: V01/ EN | Document Status: ReleasedAlcatel-Lucent – ProprietarySee Notice on Page 2 2/ 20Copyright © 2010 by Alcatel-Lucent Technologies. All Rights Reserved.About Alcatel-LucentAlcatel-Lucent (Euronext Paris and NYSE: ALU) provides solutions that enable service providers, enterprises and governments worldwide, to deliver voice, data and video communication services to end-users. As a leader in fixed, mobile and converged broadband networking, IP technologies, applications, and services, Alcatel-Lucent offers the end-to-end solutions that enable compelling communications services for people at home, at work and on the move. For more information, visit Alcatel-Lucent on the Internet: www.alcatel-lucent.comNoticeThe information contained in this document is subject to change without notice. At the time of publication, it reflects the latest information on Alcatel-Lucent’s offer, however, our policy of continuing development may result in improvement or change to the specifications described.Trademarks The following trademarks are used throughout this document:Alcatel-Lucent, Alcatel, Lucent Technologies and their respective logos are trademarks and service marks of Alcatel-Lucent, Alcatel and Lucent Technologies.
TD-RRH8X20-25 PRODUCT DESCRIPTION DEC 2013Document Issue: V01/ EN | Document Status: ReleasedAlcatel-Lucent – ProprietarySee Notice on Page 2 3/ 20CONTENTS1 INTRODUCTION.................................................................................................. 5 1.1 OVERVIEW.......................................................................................................5 1.2 SCOPE OF THIS DOCUMENT.......................................................................................5 2 TD-RRH8X20-25 SOLUTION OVERVIEW..................................................................... 6 2.1 OVERVIEW.......................................................................................................6 3 TD-RRH8X20-25 PRODUCT DESCRIPTION .................................................................. 8 3.1 OVERVIEW.......................................................................................................8 3.2 MAIN CHARACTERISTICS AND TECHNICAL DATA....................................................................9 3.2.1 Connectivity and Interfaces........................................................................9 3.3 MECHANICAL CHARACTERISTICS ................................................................................10 3.3.1 Mechanical mounting solutions.................................................................. 10 3.3.2 Solar shield ......................................................................................... 11 4 ENVIRONMENTAL AND REGULATORY COMPLIANCE .....................................................13 4.1 ENVIRONMENTAL COMPLIANCE..................................................................................13 4.1.1 Operation Temperature and Humidity ......................................................... 13 4.1.2 Storage ..............................................................................................13 4.1.3 Transportation ..................................................................................... 13 4.2 REGULATORY COMPLIANCE.....................................................................................13 4.2.1 Safety................................................................................................ 13 4.2.2 EMC................................................................................................... 14 4.2.3 Eco-environmental compliancy .................................................................. 17 5 APPENDICES ....................................................................................................18 5.1 APPENDIX A: PUBLICATION HISTORY ...........................................................................18 5.2 APPENDIX C: GLOSSARY &ACRONYMS..........................................................................18 5.2.1 Glossary .............................................................................................18 5.2.2 Acronyms............................................................................................18
TD-RRH8X20-25 PRODUCT DESCRIPTION DEC 2013Document Issue: V01/ EN | Document Status: ReleasedAlcatel-Lucent – ProprietarySee Notice on Page 2 4/ 20LIST OF FIGURESFigure 1 – Alcatel-Lucent TD-RRH8X20-25 Product...........................................................................6 Figure 2 – TD-RRH8X20-25 System Overview (Star Configuration Supported From BBU)..............................7 Figure 3 - TD-RRH8X20-25 Functional Architecture..........................................................................8 Figure 4 -TD-RRH8X20-25 mounted on a pole................................................................................10 Figure 5 -TD-RRH8X20-25 with solar shield ..................................................................................12 LIST OF TABLESTable 1 - TD-RRH8X20-25 Main Characteristics...............................................................................9
TD-RRH8X20-25 PRODUCT DESCRIPTION DEC 2013Document Issue: V01/ EN | Document Status: ReleasedAlcatel-Lucent – ProprietarySee Notice on Page 2 5/ 201 INTRODUCTION1.1 OverviewThis document provides an overview and describes the characteristics of the TD-LTE Remote Radio Head TD-RRH8X20-25 using 3GPP bands 41 (working band 2496 up to 2690MHz).The content of this document is not a commitment from Alcatel-Lucent. Alcatel-Lucent reserves the right to change the technical specifications without notice until General Availability of the product. For more information on features availability, please refer to the Product Bulletins, Feature Planning Guides, Baseline and Release Notes.1.2 Scope of this DocumentThe scope of this document is the Product Description for Alcatel-Lucent TD-RRH8X20W2500MHzOther RRH products are available from Alcatel-Lucent’s portfolio. In addition, there will further extensions to the portfolio in future releases.
TD-RRH8X20-25 PRODUCT DESCRIPTION DEC 2013Document Issue: V01/ EN | Document Status: ReleasedAlcatel-Lucent – ProprietarySee Notice on Page 2 6/ 202 TD-RRH8X20-25 SOLUTION OVERVIEW2.1 OverviewThe Alcatel-Lucent distributed solution is composed of two main parts:xThe Alcatel-Lucent Base Band UnitxThe Alcatel-Lucent TD-RRH8X20-25, located locally or on a remote site: TD-RRH8X20-25provides the RF transceiver, PA and filter functions typically found in the conventional Node B.Figure 1 – Alcatel-Lucent TD-RRH8X20-25 ProductThese two equipments are linked by optical fibres, carrying downlink and uplink base band digital signals along with OAM information.
TD-RRH8X20-25 PRODUCT DESCRIPTION DEC 2013Document Issue: V01/ EN | Document Status: ReleasedAlcatel-Lucent – ProprietarySee Notice on Page 2 7/ 20Figure 2 – TD-RRH8X20-25 System Overview (Star Configuration Supported From BBU)Local SiteOptical InterfaceBBUOptical fibreRRH8x20-25Remote Site
TD-RRH8X20-25 PRODUCT DESCRIPTION DEC 2013Document Issue: V01/ EN | Document Status: ReleasedAlcatel-Lucent – ProprietarySee Notice on Page 2 8/ 203 TD-RRH8X20-25 PRODUCT DESCRIPTION3.1 OverviewThe RRH includes:xEight (8) 2500MHz transmit paths of up to 20W per pathxEight (8) receive pathsxEight (8) Broadband Power Amplifiers of 196MHz bandwidth eachxThree (3) fibre interfaces carrying downlink and uplink base band signals, as well as OAM information and timing signalxAn AISG controller supporting Remote Electrical Tilt via the calibration port (OOK signal) or the AISG port (RS485 signal)xA PSU (power supply unit) converting the input voltage into the target voltage for the different internal units.Figure 3 - TD-RRH8X20-25 Functional Architecture
TD-RRH8X20-25 PRODUCT DESCRIPTION DEC 2013Document Issue: V01/ EN | Document Status: ReleasedAlcatel-Lucent – ProprietarySee Notice on Page 2 9/ 203.2 Main Characteristics and Technical DataTD-RRH8X20-25 main characteristics are summarized in the following table:dimensionsSizes (HxWxD) 645 x 445 x 145 mmTemperature range -40ºC to +55ºCEnvironmental (Other) Fan-free (natural convection cooling)RF CharacteristicsRF output power @antenna port Up to 20W at each antenna portWorking frequency band 2496MHz to 2690MHz (194MHz bandwidth)Supported antenna type 8 port dual polarization smart antennaOptical CharacteristicsSupported fibre type Single mode dual fibres (SMDF) or Multi mode dual Electrical/Other CharacteristicsPower supply -48V (-38V/-57V)Table 1 - TD-RRH8X20-25 Main Characteristics3.2.1 Connectivity and InterfacesThe RRH provides the following external interfaces:ЬThree (3) optical CPRI linksЬEight (8) antenna portsЬOne (1) antenna calibration port ЬOne (1) AISG port for RET support ЬOne (1) alarm port ЬOne (1) DC power input port
TD-RRH8X20-25 PRODUCT DESCRIPTION DEC 2013Document Issue: V01/ EN | Document Status: ReleasedAlcatel-Lucent – ProprietarySee Notice on Page 2 10 / 203.3 Mechanical Characteristics3.3.1 Mechanical mounting solutionsTD-RRH8x20-25 can be either pole or wall mounted, using the appropriate mounting brackets: these brackets are designed to be easily fitted before hanging and locking the RRH on to it. Figure 4 -TD-RRH8X20-25 mounted on a pole
TD-RRH8X20-25 PRODUCT DESCRIPTION DEC 2013Document Issue: V01/ EN | Document Status: ReleasedAlcatel-Lucent – ProprietarySee Notice on Page 2 11 / 203.3.2 Grounding:3.3.3 Solar shieldTD-RRH8x20-25 does not use any fan as natural convection cooling is employed. It is equipped with an aesthetic solar shield that may be removed, if desired, for indoor installation only.In case of outdoor installations, a solar shield is used. The cover is of low weight and easy to install.
TD-RRH8X20-25 PRODUCT DESCRIPTION DEC 2013Document Issue: V01/ EN | Document Status: ReleasedAlcatel-Lucent – ProprietarySee Notice on Page 2 12 / 20Figure 5 -TD-RRH8X20-25 with solar shieldThe solar shield is part of the thermal concept of the TD-RRH8X20-25, protecting the RRHagainst direct sun radiation.
TD-RRH8X20-25 PRODUCT DESCRIPTION DEC 2013Document Issue: V01/ EN | Document Status: ReleasedAlcatel-Lucent – ProprietarySee Notice on Page 2 13 / 204 ENVIRONMENTAL AND REGULATORY COMPLIANCE4.1 Environmental Compliance4.1.1 Operation Temperature and HumidityThe following requirements for environmental conditions apply for the RRH:RRH meets the requirements as specified in IEC 60721-3-4 “Classification of Groups of Environmental Parameters and their Severities Stationary use at Non-weather protected locations” Classes 4K2/4Z5/4Z7/4B1/4C2/4S2/4M5.4.1.2 StorageRRH meets the requirements as specified IEC 60721-3-1 “Classification of groups of environmental parameters and their severities – Storage” Classes 1K4/1Z2/1Z3/1Z5/1B2/1C2(1C1)/1S3/1M2 (Weather protected, not temperature controlledstorage locations).4.1.3 TransportationRRH meets the requirements as specified IEC 60721-3-2 “Classification of groups of environmental parameters and their severities – Transportation “Classes2K3/2B2/2C2/2S2/2M1 (Careful transportation).4.2 Regulatory Compliance4.2.1 SafetyRRH meets Safety Regulatory standards IEC/EN60950-1 & IEC/EN 60950-22 or equivalent regulatory standards
TD-RRH8X20-25 PRODUCT DESCRIPTION DEC 2013Document Issue: V01/ EN | Document Status: ReleasedAlcatel-Lucent – ProprietarySee Notice on Page 2 14 / 204.2.2 EMCProduct conformance statementsIntroduction:The statements that follow are the product conformance statements that apply to the FDDRRH when deployed in Canada.Industry Canada:ICES-003: Interference- Causing Equipment Standard Digital ApparatusThis Class A digital apparatus complies with Canadian ICES-003.Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.ICCS-03: Specification for Terminal Equipment, Terminal Systems, Network Protection Devices,Connection Arrangements and Hearing Aids CompatibilityThis product meets the applicable Industry Canada technical specifications.RF approval:• RSS-132: Cellular Telephones Employing New Technologies Operating in the Bands 2496 -2690MHzThe term “IC” before the certification/registration number only signifies that the Industry Canadatechnical specifications were met.• RSS-133: Broadband Radio Service (BRS) and the Educational Broadband Service (EBS) bands.The term “IC” before the certification/registration number only signifies that the Industry Canadatechnical specifications were met
TD-RRH8X20-25 PRODUCT DESCRIPTION DEC 2013Document Issue: V01/ EN | Document Status: ReleasedAlcatel-Lucent – ProprietarySee Notice on Page 2 15 / 20United States:Introduction:The statements that follow are the product conformance statements that apply to the TDRRH when deployed in the United States. Federal Communications Commission:Important!Changes or modifications not expressly approved by Alcatel-Lucent, Inc. could void the user'sauthority to operate the equipment..FCC Part 15:This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference.This device meets FCC Part 15 Subpart B Class B requirements. FCC Part15 Class A (as marketed)Important!This equipment has been tested and found to comply with the limits for a Class A digital device,pursuant to Part15 of the FCC Rules. These limits are designed to provide reasonable protectionsagainst harmful interference when the equipment is operated in a commercial environment. Thisequipment generates, uses, and can radiate radio frequency energy and, if not installed and used inaccordance with the instruction manual, may cause harmful interference to radio communications.Operation of this equipment in a residential area is likely to cause harmful interference, in which casethe user will be required to correct the interference at the user's expense.FCC Part15 Class B (as marketed)Important!This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation. This equipment generates, uses, and canradiate radio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee that interferencewill no to ccur in a particular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna• Increase the separation between the equipment and receiver• Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected
TD-RRH8X20-25 PRODUCT DESCRIPTION DEC 2013Document Issue: V01/ EN | Document Status: ReleasedAlcatel-Lucent – ProprietarySee Notice on Page 2 16 / 20• Consult the dealer or an experienced radio/TV technician for help.FCC Part 68:Not applicable for this DeviceRF approval:This equipment complies with Part 2, Sub part J-Equipment Authorization Procedures, of the FCC Rules. This equipment complies with Part 27-Broadband Radio Service (BRS) and the Educational Broadband Service (EBS) bands.Antenna exposure: Antenna installations for the TDRRH shall be performed in accordance with all applicablemanufacturer's recommendations, and national laws and regulations.To ensure correct antenna installation, the antenna installer shall perform all necessary calculationsand/or field measurements to evaluate compliance with applicable national laws or regulationsregarding exposure to electromagnetic fields. The supplier of radio equipment, the supplier of antennaequipment and the integrator and builder of the site must provide sufficient information so that thelimits of the exclusion zones can be determined. Any changes to the antenna or other equipment in thetransmit path may require re-evaluation of the exposures to electromagnetic fields.Pursuant to 47 CFR Part1, Subpart I, subject to the provisions of section 1.1307, all installations mustbe evaluated for requirements contained in Table 1, “Limits for maximum permissible exposure,” insection 1.1310.RRH meets the requirements as specified in:xEN 55022 / CISPR22, class B to fulfil Radiated Emissions (RE) requirement.xEN 55022 / CISPR22, class B to fulfil Conducted Emissions (CE) requirement.xIEC 61000-4-2 to fulfil Electrostatic Discharge (ESD) Immunity requirementxEN61000-4-3/A1 to fulfil Immunity to RF EM field (enclosure port) requirement.xIEC 61000-4-4 to fulfil Electrical Fast Transient (EFT) Immunity requirement.xIEC 61000-4-6 to fulfil Conducted Immunity requirement.x3GPP TS 36.113 and ETSI EN 300 386xETSI TS 136 113 for Radiated ImmunityxETSI TS 136 113 for Conducted ImmunityxFCC Part 15 Subpart B Class B for Radiated ImmunityxGR-1089-CORE, Sections 3.2.2 and 3.2.3 for conducted spurious emissionsxGR-1089-CORE, Sections 2.1.2 for ESD immunity
TD-RRH8X20-25 PRODUCT DESCRIPTION DEC 2013Document Issue: V01/ EN | Document Status: ReleasedAlcatel-Lucent – ProprietarySee Notice on Page 2 17 / 204.2.3 Eco-environmental compliancyRRH complies with:xRoHS 6/6 (lead solder free), Restriction on the use of certain Hazardous Substances (RoHS), Directive 2002/95/ECxPBEMS-L4-01, titled Country-Specific Eco-Environmental Requirements
TD-RRH8X20-25 PRODUCT DESCRIPTION DEC 2013Document Issue: V01/ EN | Document Status: ReleasedAlcatel-Lucent – ProprietarySee Notice on Page 2 18 / 205 APPENDICES5.1 Appendix A: Publication History06/DEC/2013Issue 01.00 / EN, Released5.2 Appendix C: Glossary & Acronyms5.2.1 GlossaryFibre link A fibre link is:• Either one physical fibre when Single-Mode optical propagation is used (using CWDM),• Either a pair of fibres when Multi-Mode optical propagation is used: one fibre carries the downlink signal, the other one the uplink signals (Main and Diversity digital streams are multiplexed into a single HSSL stream).5.2.2 Acronyms1-103GPP Third Generation Partnership ProjectA-DAISG Antenna Interface Standard GroupCWDM Coarse Wavelength Division MultiplexingDL DownlinkEMC Electro-Magnetic CompatibilityFDD Frequency Division Duplex
TD-RRH8X20-25 PRODUCT DESCRIPTION DEC 2013Document Issue: V01/ EN | Document Status: ReleasedAlcatel-Lucent – ProprietarySee Notice on Page 2 19 / 20G-SHW HardwareIEC International ElectrotechnicalCommissionIP Ingress ProtectionLTE Long Term EvolutionMM Multi-Mode (fibre)RET Remote Electrical TiltRF Radio FrequencyRoHS Restriction of the use of certain Hazardous SubstancesRRH Remote Radio HeadRX Receiver/ReceiveSFP Small Form-factor PluggableSW Software
TD-RRH8X20-25 PRODUCT DESCRIPTION DEC 2013Document Issue: V01/ EN | Document Status: ReleasedAlcatel-Lucent – ProprietarySee Notice on Page 2 20 / 20T - WTX Transmitter/TransmitVSWR Voltage Standing Wave RatioWEEE Waste of Electrical and Electronic Equipment

Navigation menu