Nokia of America BBTRX-18 MRO AWS WIRELESS BASE STATION User Manual MRO AWS UserMan exh3
Alcatel-Lucent USA Inc. MRO AWS WIRELESS BASE STATION MRO AWS UserMan exh3
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2232407 |
| Application ID | yL08Hudp4mA66pWrvWwsEQ== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 76.6kB (957443 bits) |
| Date Submitted | 2014-04-02 00:00:00 |
| Date Available | 2014-04-02 00:00:00 |
| Creation Date | 2014-02-17 14:45:01 |
| Producing Software | GPL Ghostscript 9.0 |
| Document Lastmod | 2014-02-17 14:46:53 |
| Document Title | MRO AWS_UserMan_exh3 |
| Document Creator | PDFCreator Version 1.2.0 |
| Document Author: | qy |
APPLICANT: Alcatel-Lucent EXHIBIT 3 FCC ID: AS5BBTRX-18 EXHIBIT 3 Section 2.1033 (c)(3) INSTALLATION AND OPERATING INSTRUCTIONS A copy of the installation and operating instructions to be furnished to the user. A draft copy of the instructions may be submitted if the actual document is not available. The actual document shall be furnished to the FCC when it becomes available. Response A copy of Alcatel-Lucent 9768 Metro Radio Outdoor B4 User Manual is attached to this exhibit. Page 1 of 1 Proprietary Use pursuant to Company instruction Title page Alcatel-Lucent 9768 Metro Radio Outdoor B4 User Manual 3MN-MRO-AWS-IMOP Issue 1 | February 2014 Alcatel-Lucent – Internal Proprietary – Use pursuant to Company instruction Proprietary Use pursuant to Company instruction Legal notice Legal notice Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All other trademarks are the property of their respective owners. The information presented is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein. Copyright © 2014 Alcatel-Lucent. All rights reserved. Contains proprietary/trade secret information which is the property of Alcatel-Lucent and must not be made available to, or copied or used by anyone outside Alcatel-Lucent without its written authorization. Alcatel-Lucent – Internal Proprietary – Use pursuant to Company instruction Contents About this document Purpose ............................................................................................................................................................................................. xi xi Reason for reissue ........................................................................................................................................................................ xi xi Intended audience ......................................................................................................................................................................... xi xi Supported systems ........................................................................................................................................................................ xi xi How to use this document ......................................................................................................................................................... xi xi Safety information ........................................................................................................................................................................ xi xi Conventions used ........................................................................................................................................................................ xii xii Related information How to order ................................................................................................................................................................................. xii xii How to comment .................................................................................................................................................................... xii xii ......................................................................................................................................................................... xii xii Safety Structure of safety statements ............................................................................................................................................... 1-1 1-1 General safety considerations ............................................................................................................................................... 1-3 1-3 Specific safety hazards ............................................................................................................................................................ 1-4 1-4 Metro Radio Outdoor features Functional features ................................................................................................................................................................... 2-1 2-1 Power ............................................................................................................................................................................................. 2-2 2-2 Physical properties ................................................................................................................................................................... 2-3 2-3 Installing an 9768 MRO B4 Components and subassemblies .......................................................................................................................................... 3-1 3-1 Procedure 3-1: Installing the 9768 MRO B4 onto a wall or pole ............................................................................ 3-2 3-2 .................................................................................................................................................................................................................................... Alcatel-Lucent 9768 MRO Alcatel-Lucent – Internal iii 3MN-MRO-AWS-IMOP Proprietary – Use pursuant to Company instruction Issue 1 February 2014 Contents .................................................................................................................................................................................................................................... Product conformance statements Overview ..................................................................................................................................................................................... A-1 A-1 United States compliance Introduction ................................................................................................................................................................................ A-2 A-2 Federal Communications Commission ............................................................................................................................ A-3 A-3 Product safety conformance statements .......................................................................................................................... A-4 A-4 Antenna exposure statements .............................................................................................................................................. A-5 A-5 FDA/IEC optical transmitter product compliance statements ................................................................................. A-6 A-6 Eco-environmental statements ............................................................................................................................................ A-7 A-7 Glossary Index .................................................................................................................................................................................................................................... Alcatel-Lucent – Internal Alcatel-Lucent 9768 MRO iv Proprietary – Use pursuant to Company instruction 3MN-MRO-AWS-IMOP Issue 1 February 2014 List of tables Terminology .................................................................................................................................................................. xii xii 2-1 AC power system wiring color codes ................................................................................................................ 2-2 2-2 DC power system wiring color codes ................................................................................................................ 2-2 3-1 LED interpretations ................................................................................................................................................ 3-22 3-22 .................................................................................................................................................................................................................................... Alcatel-Lucent 9768 MRO Alcatel-Lucent – Internal 3MN-MRO-AWS-IMOP Proprietary – Use pursuant to Company instruction Issue 1 February 2014 List of tables .................................................................................................................................................................................................................................... .................................................................................................................................................................................................................................... Alcatel-Lucent – Internal Alcatel-Lucent 9768 MRO vi Proprietary – Use pursuant to Company instruction 3MN-MRO-AWS-IMOP Issue 1 February 2014 List of figures 2-1 Form factor .................................................................................................................................................................. 2-3 2-3 2-2 Drill hole pattern for right side up orientation 2-3 Drill hole pattern for upside down orientation ................................................................................................ 2-5 3-1 Example of 9768 MRO B4 orientations ............................................................................................................ 3-2 3-2 Pole-mount bracket attachment to a large pole ............................................................................................... 3-3 3-3 Pole-mount bracket attachment to a small pole .............................................................................................. 3-3 3-4 Wall-mount bracket ................................................................................................................................................... 3-4 3-4 3-5 Fixed wall-mount bracket ....................................................................................................................................... 3-4 3-6 Security cover rear attachment 3-7 Upper screws for attachment to wall-mount bracket 3-8 Bracket ears of the wall-mount bracket 3-9 Lower screws for attachment to wall-mount bracket 3-10 RF connectors 3-11 FullAXS cable, connector components separated 3-12 Bottom of the 9768 MRO 3-13 CPRI-S SFP cage, uncovered .............................................................................................................................. 3-11 3-14 FullAXS cable, connector components separated ....................................................................................... 3-12 3-15 CPRI-S SFP port, exposed 3-16 CPRI-S SFP port, LC connected 3-17 FullAXS cable, inner connector body in place ............................................................................................. 3-13 3-18 FullAXS cable, connected, and watertight .................................................................................................... 3-13 3-19 9768 MRO B4 ground connection points ...................................................................................................... 3-14 3-20 Double hole lug ........................................................................................................................................................ 3-15 3-15 ................................................................................................ 2-4 ............................................................................................................................. 3-5 .................................................................................... 3-6 ............................................................................................................. 3-7 ................................................................................... 3-8 ............................................................................................................................................................. 3-9 3-9 ....................................................................................... 3-11 .................................................................................................................................... 3-11 ................................................................................................................................... 3-12 ....................................................................................................................... 3-12 .................................................................................................................................................................................................................................... Alcatel-Lucent 9768 MRO Alcatel-Lucent – Internal vii 3MN-MRO-AWS-IMOP Proprietary – Use pursuant to Company instruction Issue 1 February 2014 List of figures .................................................................................................................................................................................................................................... 3-21 Power connector components ............................................................................................................................. 3-16 3-22 Power connector in the connector boot 3-23 Connector boot over the connector ................................................................................................................... 3-18 3-24 Power connector 3-25 Security cover front attachment ........................................................................................................... 3-17 ...................................................................................................................................................... 3-18 3-18 ......................................................................................................................... 3-21 .................................................................................................................................................................................................................................... Alcatel-Lucent – Internal Alcatel-Lucent 9768 MRO viii Proprietary – Use pursuant to Company instruction 3MN-MRO-AWS-IMOP Issue 1 February 2014 List of procedures Installing an 9768 MRO B4 3-1 Installing the 9768 MRO B4 onto a wall or pole ........................................................................................... 3-2 .................................................................................................................................................................................................................................... Alcatel-Lucent 9768 MRO Alcatel-Lucent – Internal ix 3MN-MRO-AWS-IMOP Proprietary – Use pursuant to Company instruction Issue 1 February 2014 List of procedures .................................................................................................................................................................................................................................... .................................................................................................................................................................................................................................... Alcatel-Lucent – Internal Alcatel-Lucent 9768 MRO Proprietary – Use pursuant to Company instruction 3MN-MRO-AWS-IMOP Issue 1 February 2014 About this document About this document Purpose The purpose of this document is to provide hardware installation instructions for Alcatel-Lucent 9768 Metro Radio Outdoor (9768 MRO) B4. Reason for reissue The reissue reasons are: Issue number Issue Date Reason for reissue February 2014 Standard Intended audience The audience for this document is Installation personnel. Supported systems This document assumes that a continuous stream of connected devices already delivers secure connectivity to the public network from one or more reachable places in the venue. With this assumption, the scope of the document is only the 9768 MRO and what is required to connect it to the network, meet its power needs, and ensure that it can be placed into reliable service. How to use this document Start with the first chapter and work through the manual to the end. Once you have done this, you will have carried out the hardware installation completely and in the proper sequence. Safety information For your safety, this document contains safety statements. Safety statements are given at points where risks of damage to personnel, equipment, and operation may exist. Failure to follow the directions in a safety statement may result in serious consequences. ................................................................................................................................................................................................................................... Alcatel-Lucent 9768 MRO Alcatel-Lucent – Internal xi 3MN-MRO-AWS-IMOP Proprietary – Use pursuant to Company instruction Issue 1 February 2014 About this document .................................................................................................................................................................................................................................... Conventions used Vocabulary conventions The following vocabulary conventions are also used when referring to Alcatel-Lucent products: Table 1 Terminology Term Description/Meaning 9768 MRO B4 Refers to Alcatel-Lucent 9768 Metro Radio Outdoor B4 or Alcatel-Lucent 9768 MRO B4. Alcatel-Lucent 9768 Metro Radio Outdoor Refers to 9768 MRO B4. 9768 MRO Refers to Alcatel-Lucent 9768 Metro Radio Outdoor or Alcatel-Lucent 9768 MRO. Related information Not Applicable. How to order Not Applicable. How to comment To comment on this document, go to the Online Comment Form (http://infodoc.alcatellucent.com/comments/) or e-mail your comments to the Comments Hotline (comments@alcatel-lucent.com). .................................................................................................................................................................................................................................... Alcatel-Lucent – Internal Alcatel-Lucent 9768 MRO xii Proprietary – Use pursuant to Company instruction 3MN-MRO-AWS-IMOP Issue 1 February 2014 1 Safety Structure of safety statements Overview This topic describes the components of safety statements that appear in this document. General structure Safety statements include the following structural elements: CAUTION Lifting hazard SA Lifting this equipment by yourself can result in injury due to the size and weight of the equipment. Always use three people or a lifting device to transport and position this equipment. [ABC123] Item Structure element Purpose Safety alert symbol Indicates the potential for personal injury (optional) Safety symbol Indicates hazard type (optional) Signal word Indicates the severity of the hazard Hazard type Describes the source of the risk of damage or injury Safety message Consequences if protective measures fail Avoidance message Protective measures to take to avoid the hazard ................................................................................................................................................................................................................................... Alcatel-Lucent 9768 MRO Alcatel-Lucent – Internal 1-1 3MN-MRO-AWS-IMOP Proprietary – Use pursuant to Company instruction Issue 1 February 2014 Safety Structure of safety statements .................................................................................................................................................................................................................................... Item Structure element Purpose Identifier The reference ID of the safety statement (optional) Signal words The signal words identify the hazard severity levels as follows: Signal word Meaning DANGER Indicates an extremely hazardous situation which, if not avoided, will result in death or serious injury. WARNING Indicates a hazardous situation which, if not avoided, could result in death or serious injury. CAUTION Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. NOTICE Indicates a hazardous situation not related to personal injury. .................................................................................................................................................................................................................................... Alcatel-Lucent – Internal Alcatel-Lucent 9768 MRO 1-2 Proprietary – Use pursuant to Company instruction 3MN-MRO-AWS-IMOP Issue 1 February 2014 Safety General safety considerations .................................................................................................................................................................................................................................... General safety considerations Shock hazards WARNING Electric-shock hazard Some parts of all electrical installations are energized. Failure to follow safe work practices and the safety warnings may lead to bodily injury and property damage. For this reason, only trained and qualified personnel (electrical workers as defined in IEC 60215 or EN 60215 + A1 or in the National Electrical Code or in ANSI/NFPA No. 10) may install or service the installation. WARNING Electric-shock hazard There is a danger of electric shock if the grounding system is inadequate. You must comply with the grounding requirements for the grounding system. .................................................................................................................................................................................................................................... Alcatel-Lucent 9768 MRO Alcatel-Lucent – Internal 1-3 3MN-MRO-AWS-IMOP Proprietary – Use pursuant to Company instruction Issue 1 February 2014 Safety Specific safety hazards .................................................................................................................................................................................................................................... Specific safety hazards Human irradiation by RF transmissions The Federal Communications Commission (FCC) establishes and from time to time revises guidelines for human exposure to RF electromagnetic fields in the USA. Its Office of Engineering and Technology then publishes these guidelines in bulletins to allow companies, such as Alcatel-Lucent, who develop products that transmit non-ionizing RF waves to calculate safe human exposure distances, based on a corresponding amount of time spent within those distances. Safe separation distance The product with antennas equipped shall comply with RF exposure limits of FCC Part 1.1310 Table 1 (B) Limits for General Population/Uncontrolled Exposure. The equipment must be installed and operated with a minimum separation distance, determined by RF field evaluation, between the radiating antennas and nearby persons. Any changes to the antenna or other equipment in the transmit path may require re-evaluation of the exposures to electromagnetic fields. .................................................................................................................................................................................................................................... Alcatel-Lucent – Internal Alcatel-Lucent 9768 MRO 1-4 Proprietary – Use pursuant to Company instruction 3MN-MRO-AWS-IMOP Issue 1 February 2014 2 2 etro Radio Outdoor features Functional features Air interface and carrier band The 9768 MRO B4 is a dual transmit/dual receive path radio supporting frequency division duplex (FDD) LTE air interface. The 9768 MRO B4 is ideally suited to support dense metro hot spots, with multiple-input multiple-output (MIMO) 2x2 operation in up to 20 MHz of bandwidth. Note: 9768 MRO B4 also supports a single Tx antenna (SIMO). ................................................................................................................................................................................................................................... Alcatel-Lucent 9768 MRO Alcatel-Lucent – Internal 2-1 3MN-MRO-AWS-IMOP Proprietary – Use pursuant to Company instruction Issue 1 February 2014 Metro Radio Outdoor features Power .................................................................................................................................................................................................................................... Power AC power system The 9768 MRO B4 requires a single phase, three-wire power source to provide nominal 120 -V AC, 208 -V AC, or 220 -V AC (measured at the input), line to neutral. The following table summarizes the AC power system wiring color codes: Table 2-1 AC power system wiring color codes Color Connector pin assignment Function Brown Pin 1 Line Blue Pin 2 Neutral Green/Yellow Pin 3 Ground/protective earth (PE) N/C Pin 4 N/C Power factor The minimum power factor (ratio of working power to apparent power) is 0.92. Although this value is above the typical power factor penalty threshold, it is unlikely to have a true impact on rates for power consumption. AC frequency from source The power supply of the 9768 MRO B4 accepts frequencies ranging from 47 Hz to 63 Hz from the voltage source, at any allowable level of voltage. DC power system The 9768 MRO B4 requires a -48 V DC input. The following table summarizes the DC power system wiring color codes: Table 2-2 DC power system wiring color codes Color Connector pin assignment Function N/C Pin 1 N/C White Pin 2 Return N/C Pin 3 N/C Black Pin 4 -48 V DC .................................................................................................................................................................................................................................... Alcatel-Lucent – Internal Alcatel-Lucent 9768 MRO 2-2 Proprietary – Use pursuant to Company instruction 3MN-MRO-AWS-IMOP Issue 1 February 2014 Metro Radio Outdoor features Physical properties .................................................................................................................................................................................................................................... Physical properties Form factor The form factor of the 9768 MRO B4 is as shown below. Figure 2-1 Form factor Dimensions The approximate dimensions of the 9768 MRO B4 without its mounting hardware is as follows: • • • • 17.9 inches (454 mm) high 6.8 inches (173 mm) wide 6.2 inches (158 mm) deep 7.8 inches (198 mm) deep with its wall-mount bracket .................................................................................................................................................................................................................................... Alcatel-Lucent 9768 MRO Alcatel-Lucent – Internal 2-3 3MN-MRO-AWS-IMOP Proprietary – Use pursuant to Company instruction Issue 1 February 2014 Metro Radio Outdoor features Physical properties .................................................................................................................................................................................................................................... Drill hole pattern The following image provides different views of the drill hole pattern for mounting the 9768 MRO B4 in a right-side up position: Figure 2-2 Drill hole pattern for right side up orientation Measurements are in mm [inches] .................................................................................................................................................................................................................................... Alcatel-Lucent – Internal Alcatel-Lucent 9768 MRO 2-4 Proprietary – Use pursuant to Company instruction 3MN-MRO-AWS-IMOP Issue 1 February 2014 Metro Radio Outdoor features Physical properties .................................................................................................................................................................................................................................... The following image provides different views of the drill hole pattern for mounting the 9768 MRO B4 in an upside down position: Figure 2-3 Drill hole pattern for upside down orientation Measurements are in mm [inches] Note: Mounting the 9768 MRO B4 upside down is recommended only for installations where the 9768 MRO B4 will not be exposed to the weather elements. .................................................................................................................................................................................................................................... Alcatel-Lucent 9768 MRO Alcatel-Lucent – Internal 2-5 3MN-MRO-AWS-IMOP Proprietary – Use pursuant to Company instruction Issue 1 February 2014 Metro Radio Outdoor features Physical properties .................................................................................................................................................................................................................................... .................................................................................................................................................................................................................................... Alcatel-Lucent – Internal Alcatel-Lucent 9768 MRO 2-6 Proprietary – Use pursuant to Company instruction 3MN-MRO-AWS-IMOP Issue 1 February 2014 3 Installing an 9768 MRO B4 Components and subassemblies List of major components and subassemblies CC Description 109803106 9768 MRO B4 DC 109809806 9768 MRO B4 AC 849178934 Filter, KS24799 L5 201386596 Amplifier, BNJ893, CDY-B4 201386620 Radio, BNJ895, NG3e-B4 270056567 Power Supply Unit, DC 1AF24959AAAA Power Supply Unit, AC ................................................................................................................................................................................................................................... Alcatel-Lucent 9768 MRO Alcatel-Lucent – Internal 3-1 3MN-MRO-AWS-IMOP Proprietary – Use pursuant to Company instruction Issue 1 February 2014 Installing an 9768 MRO B4 Procedure 3-1: Installing the 9768 MRO B4 onto a wall or pole .................................................................................................................................................................................................................................... Procedure 3-1: Installing the 9768 MRO B4 onto a wall or pole Overview This procedure includes guidelines for fastening the bracket, making the data connection and making the power connection. It does not extend to bringing the 9768 MRO B4 into operation, reading the status of the connected 9768 MRO, and optimizing its RF communications. The Alcatel-Lucent 9768 MRO is designed to be primarily installed in the right-side up orientation, but it can also be installed in an upside down position, as shown in the following image: Figure 3-1 Example of 9768 MRO B4 orientations Installing the 9768 MRO B4 Note: Save all the protective caps and connector covers in case the unit needs to be returned later. Perform the following steps: ................................................................................................................................................................................................... If this is a pole-mount installation, attach the standard RRH pole-mount hardware to the pole. .................................................................................................................................................................................................................................... Alcatel-Lucent – Internal Alcatel-Lucent 9768 MRO 3-2 Proprietary – Use pursuant to Company instruction 3MN-MRO-AWS-IMOP Issue 1 February 2014 Installing an 9768 MRO B4 Procedure 3-1: Installing the 9768 MRO B4 onto a wall or pole .................................................................................................................................................................................................................................... The following image shows a large pole kit (152 mm - 380 mm). Figure 3-2 Pole-mount bracket attachment to a large pole The following image shows a small pole kit (50 mm - 152 mm). Figure 3-3 Pole-mount bracket attachment to a small pole ................................................................................................................................................................................................... Attach the wall-mount bracket • • to the pole-mount bracket, if this is a pole-mount installation, using M10 hardware provided with the pole mount kit. to the venue wall or façade, if this is a wall-mount installation, using 3/8 inch (M10) or 1/4 inch (M6) hardware. .................................................................................................................................................................................................................................... Alcatel-Lucent 9768 MRO Alcatel-Lucent – Internal 3-3 3MN-MRO-AWS-IMOP Proprietary – Use pursuant to Company instruction Issue 1 February 2014 Installing an 9768 MRO B4 Procedure 3-1: Installing the 9768 MRO B4 onto a wall or pole .................................................................................................................................................................................................................................... Figure 3-4 Wall-mount bracket Wall-mount bracket Wall-mount bracket Wall-mount bracket on a large pole on a small pole Figure 3-5 Fixed wall-mount bracket Rear view Front view ................................................................................................................................................................................................... If this 9768 MRO B4 includes the optional interface security cover, attach the rear half of the cover to the 9768 MRO B4 enclosure using two-M3x8 TR10 screws. .................................................................................................................................................................................................................................... Alcatel-Lucent – Internal Alcatel-Lucent 9768 MRO 3-4 Proprietary – Use pursuant to Company instruction 3MN-MRO-AWS-IMOP Issue 1 February 2014 Installing an 9768 MRO B4 Procedure 3-1: Installing the 9768 MRO B4 onto a wall or pole .................................................................................................................................................................................................................................... The following image is a preliminary view of the security cover: Figure 3-6 Security cover rear attachment ................................................................................................................................................................................................... Thread two M6x20 TR30 screws into the upper holes on the left and right side of the 9768 MRO, irrespective of the 9768 MRO B4 orientation (right side up or upside down), as show in the following image: .................................................................................................................................................................................................................................... Alcatel-Lucent 9768 MRO Alcatel-Lucent – Internal 3-5 3MN-MRO-AWS-IMOP Proprietary – Use pursuant to Company instruction Issue 1 February 2014 Installing an 9768 MRO B4 Procedure 3-1: Installing the 9768 MRO B4 onto a wall or pole .................................................................................................................................................................................................................................... Figure 3-7 Upper screws for attachment to wall-mount bracket Right side up orientation Upside down orientation ................................................................................................................................................................................................... Place the 9768 MRO B4 onto the wall-mount bracket so that the top ears of the bracket slide into the slots that run along the sides of the back of the 9768 MRO B4. ................................................................................................................................................................................................... Slide the 9768 MRO B4 downward until the tops of the slots in the mounting bracket ears meet the screws that you threaded into the side flanges of the 9768 MRO B4. .................................................................................................................................................................................................................................... Alcatel-Lucent – Internal Alcatel-Lucent 9768 MRO 3-6 Proprietary – Use pursuant to Company instruction 3MN-MRO-AWS-IMOP Issue 1 February 2014 Installing an 9768 MRO B4 Procedure 3-1: Installing the 9768 MRO B4 onto a wall or pole .................................................................................................................................................................................................................................... Figure 3-8 Bracket ears of the wall-mount bracket ................................................................................................................................................................................................... Thread an M6x20 TR30 screw through each of the lower side flange holes ................................................................................................................................................................................................... Tighten all four mounting screws, torque to 4.5 Nm (3.3 lb ft). .................................................................................................................................................................................................................................... Alcatel-Lucent 9768 MRO Alcatel-Lucent – Internal 3-7 3MN-MRO-AWS-IMOP Proprietary – Use pursuant to Company instruction Issue 1 February 2014 Installing an 9768 MRO B4 Procedure 3-1: Installing the 9768 MRO B4 onto a wall or pole .................................................................................................................................................................................................................................... Figure 3-9 Lower screws for attachment to wall-mount bracket Right side up orientation Upside down orientation E................................................................................................................................................................................................... N D O F S T E P S .................................................................................................................................................................................................................................... Alcatel-Lucent – Internal Alcatel-Lucent 9768 MRO 3-8 Proprietary – Use pursuant to Company instruction 3MN-MRO-AWS-IMOP Issue 1 February 2014 Installing an 9768 MRO B4 Procedure 3-1: Installing the 9768 MRO B4 onto a wall or pole .................................................................................................................................................................................................................................... Installing RF antenna cables for 9768 MRO B4 Perform the following steps: ................................................................................................................................................................................................... Connect TxRx1 and TxRx2 antenna cables to the 9768 MRO B4. The 9768 MRO B4 uses a 4.1/9.5 miniDIN RF connectors. Figure 3-10 RF connectors ................................................................................................................................................................................................... Torque the miniDIN connectors to 10 Nm (7.5 ft lb). ................................................................................................................................................................................................... Locate the surge protector within reach of the RF jumper cable from 9768 MRO B4. Note: See instructions that comes with the surge protection kit for more information. ................................................................................................................................................................................................... Mount the surge protector to a wall or panel using the bulkhead nut provided with the protector. ................................................................................................................................................................................................... Attach the 6 AWG ground cable (wire provided with the surge protector kit) to the protector body using the M8 hardware. ................................................................................................................................................................................................... Attach the other end of the ground wire to the site grounding system. .................................................................................................................................................................................................................................... Alcatel-Lucent 9768 MRO Alcatel-Lucent – Internal 3-9 3MN-MRO-AWS-IMOP Proprietary – Use pursuant to Company instruction Issue 1 February 2014 Installing an 9768 MRO B4 Procedure 3-1: Installing the 9768 MRO B4 onto a wall or pole .................................................................................................................................................................................................................................... Appropriate hardware may need to be provided by the customer to attach the ground wire to the site grounding system. ................................................................................................................................................................................................... Attach the DIN 7/16 connector of the RF jumper cable from the 9768 MRO B4 to one side of the surge protector. Torque the DIN 7/16 connection to 30 Nm (22 lb ft). ................................................................................................................................................................................................... Attach the customer provided antenna cable to the DIN 7/16 -F side of surge protector. Torque the DIN 7/16 connection to 30 Nm (22 lb ft). E................................................................................................................................................................................................... N D O F S T E P S Installing fiber cables Perform the following steps: ................................................................................................................................................................................................... Route the fiber cable between the Alcatel-Lucent 9768 Metro Radio Outdoor (9768 MRO) and the Alcatel-Lucent 9926 Base Band Unit.(9926 BBU). The FullAXS cable components are described in Figure 3-11, “FullAXS cable, connector components separated” (p. 3-11). Figure 3-11 FullAXS cable, connector components separated .................................................................................................................................................................................................................................... Alcatel-Lucent – Internal Alcatel-Lucent 9768 MRO 3-10 Proprietary – Use pursuant to Company instruction 3MN-MRO-AWS-IMOP Issue 1 February 2014 Installing an 9768 MRO B4 Procedure 3-1: Installing the 9768 MRO B4 onto a wall or pole .................................................................................................................................................................................................................................... Legend: Outer connector body Inner connector body LC connector ................................................................................................................................................................................................... Twist and remove the cap from the CPRI-S SFP cage in the bottom of the 9768 MRO B4. Figure 3-12 Bottom of the 9768 MRO Figure 3-13 CPRI-S SFP cage, uncovered ................................................................................................................................................................................................... Install the SFP module into the 9768 MRO B4. ................................................................................................................................................................................................... On the fiber cable assembly, slide the outer connector body and inner connector body away from the LC connector. .................................................................................................................................................................................................................................... Alcatel-Lucent 9768 MRO Alcatel-Lucent – Internal 3-11 3MN-MRO-AWS-IMOP Proprietary – Use pursuant to Company instruction Issue 1 February 2014 Installing an 9768 MRO B4 Procedure 3-1: Installing the 9768 MRO B4 onto a wall or pole .................................................................................................................................................................................................................................... Figure 3-14 FullAXS cable, connector components separated ................................................................................................................................................................................................... Connect the LC connector on the cable to the SFP module in the 9768 MRO B4. Figure 3-15 CPRI-S SFP port, exposed Figure 3-16 CPRI-S SFP port, LC connected .................................................................................................................................................................................................................................... Alcatel-Lucent – Internal Alcatel-Lucent 9768 MRO 3-12 Proprietary – Use pursuant to Company instruction 3MN-MRO-AWS-IMOP Issue 1 February 2014 Installing an 9768 MRO B4 Procedure 3-1: Installing the 9768 MRO B4 onto a wall or pole .................................................................................................................................................................................................................................... ................................................................................................................................................................................................... Slide the inner connector body over the LC connector until it engages the bulkhead half of the FullAXS connector on the 9768 MRO B4. Figure 3-17 FullAXS cable, inner connector body in place ................................................................................................................................................................................................... Slide the outer connector body upward to the bulkhead and twist it clockwise, to lock in place and provide a watertight seal. Figure 3-18 FullAXS cable, connected, and watertight ................................................................................................................................................................................................... Gently apply twisting pressure to ensure that the cover for the unused (CPRI-M) cage in the bulkhead is still snug in place. E................................................................................................................................................................................................... N D O F S T E P S .................................................................................................................................................................................................................................... Alcatel-Lucent 9768 MRO Alcatel-Lucent – Internal 3-13 3MN-MRO-AWS-IMOP Proprietary – Use pursuant to Company instruction Issue 1 February 2014 Installing an 9768 MRO B4 Procedure 3-1: Installing the 9768 MRO B4 onto a wall or pole .................................................................................................................................................................................................................................... Connecting the ground cable Perform the following steps to connect the ground cable to the 9768 MRO B4: ................................................................................................................................................................................................... The following figures show the ground connection 9768 MRO B4 points: Figure 3-19 9768 MRO B4 ground connection points 9768 MRO B4 Note: For AC powered 9768 MRO B4s, the primary ground is through the AC power line. The external chassis ground is used only if the site requires a dedicated chassis ground. ................................................................................................................................................................................................... Crimp the double hole lug on to the ground cable. .................................................................................................................................................................................................................................... Alcatel-Lucent – Internal Alcatel-Lucent 9768 MRO 3-14 Proprietary – Use pursuant to Company instruction 3MN-MRO-AWS-IMOP Issue 1 February 2014 Installing an 9768 MRO B4 Procedure 3-1: Installing the 9768 MRO B4 onto a wall or pole .................................................................................................................................................................................................................................... The following image shows a long barrel double hole crimp lug: Figure 3-20 Double hole lug Long barrel double hole crimp lug (1/4” hole, ¾” spacing) ................................................................................................................................................................................................... Attach the ground cable to the 9768 MRO B4 chassis using the M6 hardware provided in the ground kit (M6x16 screw, lock washer, plain washer). Clean the contact surface area and use an antioxidant to avoid oxidation. Torque the M6 fasteners to 4.5 Nm (3.3 lb ft). ................................................................................................................................................................................................... Route and attach the ground wire to the site ground system. An extra double hole crimp lug, included in the ground kit, may be used if appropriate or the customer can provide the necessary components to attach the ground wire to the site ground. Clean the contact surface area and use an antioxidant to avoid oxidation. E................................................................................................................................................................................................... N D O F S T E P S Connecting the power connector CAUTION Electric-shock hazard There is a danger of electric shock when the power cord is energized. The connection/disconnection of the power cord to the 9768 MRO must be done only with the power cord de-energized. De-energize the far end of the power cord from the power source prior to disconnection at the 9768 MRO end. .................................................................................................................................................................................................................................... Alcatel-Lucent 9768 MRO Alcatel-Lucent – Internal 3-15 3MN-MRO-AWS-IMOP Proprietary – Use pursuant to Company instruction Issue 1 February 2014 Installing an 9768 MRO B4 Procedure 3-1: Installing the 9768 MRO B4 onto a wall or pole .................................................................................................................................................................................................................................... The power connector is equipped with a twist-off weather protection cap. The connector also has a connector boot and bracket that must be installed over the power cord. The boot and bracket prevent accidental disconnection of the power from the 9768 MRO while the power cord is powered. Before connecting, ensure safe and appropriate disconnection of power from the 9768 MRO. Perform the following steps to connect the power connector to the 9768 MRO B4. ................................................................................................................................................................................................... Remove the connector cap by twisting counterclockwise. Figure 3-21 Power connector components Power Connector Bracket Cap Boot Power Cable ................................................................................................................................................................................................... Slide the power connector through the connector boot. .................................................................................................................................................................................................................................... Alcatel-Lucent – Internal Alcatel-Lucent 9768 MRO 3-16 Proprietary – Use pursuant to Company instruction 3MN-MRO-AWS-IMOP Issue 1 February 2014 Installing an 9768 MRO B4 Procedure 3-1: Installing the 9768 MRO B4 onto a wall or pole .................................................................................................................................................................................................................................... Figure 3-22 Power connector in the connector boot ................................................................................................................................................................................................... Twist on the power cord connector onto the 9768 MRO B4. ................................................................................................................................................................................................... Slide the connector boot over the connector. .................................................................................................................................................................................................................................... Alcatel-Lucent 9768 MRO Alcatel-Lucent – Internal 3-17 3MN-MRO-AWS-IMOP Proprietary – Use pursuant to Company instruction Issue 1 February 2014 Installing an 9768 MRO B4 Procedure 3-1: Installing the 9768 MRO B4 onto a wall or pole .................................................................................................................................................................................................................................... Figure 3-23 Connector boot over the connector ................................................................................................................................................................................................... Secure the connector boot to the bracket using the cable tie provided with the power cable. Figure 3-24 Power connector E................................................................................................................................................................................................... N D O F S T E P S .................................................................................................................................................................................................................................... Alcatel-Lucent – Internal Alcatel-Lucent 9768 MRO 3-18 Proprietary – Use pursuant to Company instruction 3MN-MRO-AWS-IMOP Issue 1 February 2014 Installing an 9768 MRO B4 Procedure 3-1: Installing the 9768 MRO B4 onto a wall or pole .................................................................................................................................................................................................................................... Installing the AC power cable There are two possible options while installing the AC power cable - using a connector or hardwire the power cord. Perform the following steps if your using a connector: ................................................................................................................................................................................................... To terminate the unterminated end of the AC power cable, ensure that the plug used is suitable to the environment of use. For example, in an uncontrolled outdoor environment, use a waterproof plug that supports the supply voltage (120-V AC, 208-V AC, or 240-V AC). The cable may be cut down to length if the provided length of 14.7 ft (4.5 m) is more than required. The plug must be provided by the customer. ................................................................................................................................................................................................... Do not connect the far end of the power cord to the AC receptacle outlet or any other power source until it is ready to turn on the 9768 MRO B4. E................................................................................................................................................................................................... N D O F S T E P S Hardwiring the power cord Perform the following steps to hardwire the power cord: ................................................................................................................................................................................................... The AC power cord is 14.7 ft (4.5 m) long. Locate the AC junction box within reach of the AC power cord. Ensure suitable drip loops can be maintained at, both, the 9768 MRO B4 and the junction box. ................................................................................................................................................................................................... Route the AC power from the source to the junction box per acceptable local codes. ................................................................................................................................................................................................... Hardwire the power cord to the power source. If a local disconnect switch or circuit breaker is desired, install one in the junction box. E................................................................................................................................................................................................... N D O F S T E P S .................................................................................................................................................................................................................................... Alcatel-Lucent 9768 MRO Alcatel-Lucent – Internal 3-19 3MN-MRO-AWS-IMOP Proprietary – Use pursuant to Company instruction Issue 1 February 2014 Installing an 9768 MRO B4 Procedure 3-1: Installing the 9768 MRO B4 onto a wall or pole .................................................................................................................................................................................................................................... Installing the DC power cable Perform the following steps to install the DC power cable: ................................................................................................................................................................................................... The DC power cord is 14.7 ft (4.5 m) long. Locate the DC junction box within reach of the DC power cord. Ensure suitable drip loops can be maintained at, both, the 9768 MRO B4 and the junction box. ................................................................................................................................................................................................... Route the DC power from the source to the junction box per acceptable local codes. ................................................................................................................................................................................................... Hardwire the power cord to the power source. If a local disconnect switch or circuit breaker is desired, install one in the junction box. E................................................................................................................................................................................................... N D O F S T E P S Fixing the optional security cover ................................................................................................................................................................................................... If this 9768 MRO B4 includes the optional interface security cover, attach the front half of the cover to the rear half using two-M3x8 TR10 screws. .................................................................................................................................................................................................................................... Alcatel-Lucent – Internal Alcatel-Lucent 9768 MRO 3-20 Proprietary – Use pursuant to Company instruction 3MN-MRO-AWS-IMOP Issue 1 February 2014 Installing an 9768 MRO B4 Procedure 3-1: Installing the 9768 MRO B4 onto a wall or pole .................................................................................................................................................................................................................................... The following image is a preliminary view of the security cover: Figure 3-25 Security cover front attachment E................................................................................................................................................................................................... N D O F S T E P S .................................................................................................................................................................................................................................... Alcatel-Lucent 9768 MRO Alcatel-Lucent – Internal 3-21 3MN-MRO-AWS-IMOP Proprietary – Use pursuant to Company instruction Issue 1 February 2014 Installing an 9768 MRO B4 Procedure 3-1: Installing the 9768 MRO B4 onto a wall or pole .................................................................................................................................................................................................................................... Powering up the device Perform the following steps: ................................................................................................................................................................................................... Test the power at the power source. ................................................................................................................................................................................................... If power to the receptacle outlet has been shut off, turn it on. ................................................................................................................................................................................................... CAUTION RF hazard Near immediately after the model is powered, it can begin to transmit RF signals and thus becomes a potential hazard of human irradiation from that RF. Nonionizing radiation of this kind may damage human tissue or cause other health problems, even at doses far below those that produce perceptible heating. For more information on the safe separation distance, see “Safe separation distance” (p. 1-4). Plug the power cord into the power source. ................................................................................................................................................................................................... Begin observing and noting the changes that occur in the LED indications of the 9768 MRO. On the bottom of the Alcatel-Lucent 9768 MRO, a single visible LED provides local diagnostic indications. The LED indications have specific meanings, as defined in the following table: Table 3-1 LED interpretations If the LED is... then the indication is that... not lit at all the 9768 MRO is not powered. steady-lit green the 9768 MRO is powered, its RF functions are enabled, and its links with the 9926 d2U Base Band Unit are active. blinking green the 9768 MRO is not transmitting. steady-lit yellow the slave link between this 9768 MRO and the next 9768 MRO in a daisy-chained configuration has a fault. Where a daisy chain is not implemented (as in the initial release of this product, which does not support daisy chaining), this LED condition will not be seen. blinking yellow a download of firmware is occurring. .................................................................................................................................................................................................................................... Alcatel-Lucent – Internal Alcatel-Lucent 9768 MRO 3-22 Proprietary – Use pursuant to Company instruction 3MN-MRO-AWS-IMOP Issue 1 February 2014 Installing an 9768 MRO B4 Procedure 3-1: Installing the 9768 MRO B4 onto a wall or pole .................................................................................................................................................................................................................................... Table 3-1 LED interpretations (continued) If the LED is... then the indication is that... steady-lit red either blinking red • the system is in its initial power-up state • a major non-recoverable hardware failure in the 9768 MRO is occurring, and it must be replaced. a recoverable error is occurring. For example, the temperature is out of range or an antenna fault exists. ................................................................................................................................................................................................... When a steady-lit green indication has been achieved, inform the commissioning and integration team that the installation has been successfully completed. E................................................................................................................................................................................................... N D O F S T E P S .................................................................................................................................................................................................................................... Alcatel-Lucent 9768 MRO Alcatel-Lucent – Internal 3-23 3MN-MRO-AWS-IMOP Proprietary – Use pursuant to Company instruction Issue 1 February 2014 Installing an 9768 MRO B4 Procedure 3-1: Installing the 9768 MRO B4 onto a wall or pole .................................................................................................................................................................................................................................... .................................................................................................................................................................................................................................... Alcatel-Lucent – Internal Alcatel-Lucent 9768 MRO 3-24 Proprietary – Use pursuant to Company instruction 3MN-MRO-AWS-IMOP Issue 1 February 2014 Appendix A: Product conformance statements Overview Purpose This section presents the product conformance statements that apply to the Alcatel-Lucent 9768 Metro Radio Outdoor access point equipment. The statements that are required are determined primarily by national or multi-national regulations. However, in some regions, contract terms determine which statements are required. The presence of the statement indicates that the product does comply with that statement wherever it is required to do so. Contents United States compliance A-2 Federal Communications Commission A-3 Product safety conformance statements A-4 Antenna exposure statements A-5 FDA/IEC optical transmitter product compliance statements A-6 Eco-environmental statements A-7 ................................................................................................................................................................................................................................... Alcatel-Lucent 9768 MRO Alcatel-Lucent – Internal A-1 3MN-MRO-AWS-IMOP Proprietary – Use pursuant to Company instruction Issue 1 February 2014 Product conformance statements United States compliance Introduction .................................................................................................................................................................................................................................... United States compliance Introduction Purpose The statements that follow are the product conformance statements that apply to the Alcatel-Lucent 9768 Metro Radio Outdoor when deployed in the United States. Contents Federal Communications Commission A-3 Product safety conformance statements A-4 Antenna exposure statements A-5 FDA/IEC optical transmitter product compliance statements A-6 Eco-environmental statements A-7 .................................................................................................................................................................................................................................... Alcatel-Lucent – Internal Alcatel-Lucent 9768 MRO A-2 Proprietary – Use pursuant to Company instruction 3MN-MRO-AWS-IMOP Issue 1 February 2014 Product conformance statements United States compliance Federal Communications Commission .................................................................................................................................................................................................................................... Federal Communications Commission Federal Communications Commission Important! Changes or modifications not expressly approved by Alcatel-Lucent, Inc. could void the user’s authority to operate the equipment. This device complies with Part 15 of the 47 CFR FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 47 CFR FCC Part 15 Class B Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the 47 CFR FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • • • • Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help. RF approval This equipment complies with Part 2, Subpart J - Equipment Authorization Procedures, of the FCC Rules. This equipment complies with Part 27 - MISCELLANEOUS WIRELESS COMMUNICATIONS SERVICES. .................................................................................................................................................................................................................................... Alcatel-Lucent 9768 MRO Alcatel-Lucent – Internal A-3 3MN-MRO-AWS-IMOP Proprietary – Use pursuant to Company instruction Issue 1 February 2014 Product conformance statements United States compliance Product safety conformance statements .................................................................................................................................................................................................................................... Product safety conformance statements Product safety conformance This equipment is Safety Certified for the United States of America by a Nationally Recognized Test Laboratory (NRTL) accredited by the US Department of Labor, Occupational Safety and Health Administration (OSHA), such as UL, CSA, or others. The product bears this certification mark of this certification laboratory on its main nameplate label. Should the local authority having jurisdiction (AHJ) require prior or additional verification of this certification, a product certificate of compliance can be obtained from the specific certification laboratory by the business/product unit Applicant for the product or by contacting Alcatel-Lucent Technical Support. See the Alcatel-Lucent Support web site ( (http://www.alcatel-lucent.com/support/)) for contact information. Any modifications to this equipment are not permitted without review and official written authorization from the specific Certification Body. Unauthorized changes may violate the Product Safety Certification. Modifications or changes authorized by official CN/CNN are assumed to have received prior approval from this Lab. .................................................................................................................................................................................................................................... Alcatel-Lucent – Internal Alcatel-Lucent 9768 MRO A-4 Proprietary – Use pursuant to Company instruction 3MN-MRO-AWS-IMOP Issue 1 February 2014 Product conformance statements United States compliance Antenna exposure statements .................................................................................................................................................................................................................................... Antenna exposure statements Antenna exposure Antenna installations for this equipment shall be performed in accordance with all applicable manufacturer's recommendations, and national laws and regulations. To ensure correct antenna installation, the antenna installer shall perform all necessary calculations and/or field measurements to evaluate compliance with applicable national laws or regulations regarding exposure to electromagnetic fields. The supplier of radio equipment, the supplier of antenna equipment and the integrator and builder of the site must provide sufficient information so that the limits of the exclusion zones can be determined. Any changes to the antenna or other equipment in the transmit path may require re-evaluation of the exposures to electromagnetic fields. Pursuant to 47 CFR Part 1, Subpart I, subject to the provisions of section 1.1307, all installations must be evaluated for requirements contained in Table 1, “Limits for maximum permissible exposure”, in section 1.1310. .................................................................................................................................................................................................................................... Alcatel-Lucent 9768 MRO Alcatel-Lucent – Internal A-5 3MN-MRO-AWS-IMOP Proprietary – Use pursuant to Company instruction Issue 1 February 2014 Product conformance statements United States compliance FDA/IEC optical transmitter product compliance statements .................................................................................................................................................................................................................................... FDA/IEC optical transmitter product compliance statements FDA/IEC optical transmitter product compliance Alcatel-Lucent declares that Alcatel-Lucent 9764 Metro Cell Outdoor complies with the Food and Drug Administration’s Center for Devices and Radiological Health (FDA/CDRH) regulations 21 CFR 1040.10 and 1040.11. It is a Class I/1 laser optical fiber communication systems “product” under the FDA. This Product is designed to ensure that personnel operating the product are not endangered by laser radiation during normal operation and fault conditions. This product does not present a risk of eye injury because it is fully enclosed and does not contain embedded lasers greater than Class I/1 unless otherwise noted. .................................................................................................................................................................................................................................... Alcatel-Lucent – Internal Alcatel-Lucent 9768 MRO A-6 Proprietary – Use pursuant to Company instruction 3MN-MRO-AWS-IMOP Issue 1 February 2014 Product conformance statements United States compliance Eco-environmental statements .................................................................................................................................................................................................................................... Eco-environmental statements Packaging collection and recovery requirements Countries, states, localities, or other jurisdictions may require that systems be established for the return and/or collection of packaging waste from the consumer, or other end user, or from the waste stream. Additionally, reuse, recovery, and/or recycling targets for the return and/or collection of the packaging waste may be established. For more information regarding collection and recovery of packaging and packaging waste within specific jurisdictions, contact the Alcatel-Lucent Environment, Health and Safety organization or Alcatel-Lucent Hazardous Waste Center technical support at (888) 539-2783. Material content compliance The following notification applies to Alcatel-Lucent products distributed for sale, resale, or use. This product, part, or both may include a lithium-manganese dioxide battery, which contains very small amounts of a perchlorate substance. Special handling may apply. For California: Perchlorate Material - special handling may apply. See (http://www.dtsc.ca.gov/hazardouswaste/perchlorate/). .................................................................................................................................................................................................................................... Alcatel-Lucent 9768 MRO Alcatel-Lucent – Internal A-7 3MN-MRO-AWS-IMOP Proprietary – Use pursuant to Company instruction Issue 1 February 2014 Product conformance statements Eco-environmental statements .................................................................................................................................................................................................................................... .................................................................................................................................................................................................................................... Alcatel-Lucent – Internal Alcatel-Lucent 9768 MRO A-8 Proprietary – Use pursuant to Company instruction 3MN-MRO-AWS-IMOP Issue 1 February 2014 Glossary ................................................................................................................................................................................................................................... AHJ The agency or authority having jurisdiction. Article 100 of the National Electrical Code (NEC) for the United States defines AHJ with greater specificity, stating that it may be a federal, state, local government, or individual such as a fire chief, fire marshal, chief of a fire prevention bureau, labor department or health department, building official or electrical inspector, or others having statutory authority. In some circumstances, the property owner or his/her agent assumes the roles, and at government installations, the commanding officer or departmental official may be the AHJ. ................................................................................................................................................................................................................................... BBU Baseband unit, the digital signal processor that connects the MRO to the network and provides the timing and logic for periodic sync signals. In this context, the BBU is the master, and the MRO is the slave. Thus, the fiber optic cable from the BBU should be connected to the slave port of the MRO. ................................................................................................................................................................................................................................... CAN/CSA Canadian Standards Association. See http://www.csa.ca (http://www.csa.ca). CE Mark The official logo that substantiates the manufacturer whose product bears it has complied with all EEC directives that apply. See also EEC directive. CFR Code of Federal Regulations. Among these regulations, Title 47, “Telecommunication,” conveys the rules of the FCC companies operating networks in the USA. See also FCC. CPC Circular Plastic Connector CPRI Common Public Radio Interface. Alcatel-Lucent was one of several major companies who participated in defining the specification for this interface between the radio (the MRO in this case) and the radio equipment controller (the BBU in this case). See also BBU. ................................................................................................................................................................................................................................... d2U The BBU system supporting two controller and two modems. See also BBU. .................................................................................................................................................................................................................................... Alcatel-Lucent 9768 MRO Alcatel-Lucent – Internal GL-1 3MN-MRO-AWS-IMOP Proprietary – Use pursuant to Company instruction Issue 1 February 2014 Glossary .................................................................................................................................................................................................................................... ................................................................................................................................................................................................................................... EEC directive A law enacted by the European Union for enforcement by its Common Market. The terms of such a law have been used as a point of reference against which to compare the intentional RF emissions of the MRO. EIRP The equivalent isotropically radiated power. The density of the peak power of a radio in the direction of its greatest amount of gain. This is typically expressed in dBm, a measure relative to power out per mW. ESD Electrostatic discharge, a hazard that electronic equipment such as the MRO can suffer by way of exposure to static electricity or proximity to something that has no connection to ground. ................................................................................................................................................................................................................................... FCC Federal Communications Commission. Its Wireless Communications Service (WCS) bureau regulates, among other services, commercial services in the upper 700-MHz frequency band in the USA. FDD Frequency-division duplexing, a radio indexing system whose transmit and receive signals are on differing carrier frequencies. FRU Field-replaceable unit, a designation connoting that the part can be removed in favor of a new one when diagnostic exercises seem to have isolated a fault to the part. The overall implication is that, if those exercises point to either no particular part, then the entire unit should be replaced. In the case of the MRO, the only FRUs are the SFP port modules (see also SFPs) and the whole MRO itself. ................................................................................................................................................................................................................................... GR Generic requirements published by Telcordia Technologies. See also Core. ................................................................................................................................................................................................................................... IEC International Electrotechnical Commission. The MRO complies with numerous standards that this independent body has propagated. ................................................................................................................................................................................................................................... LC A small connector that terminates a fiber optic cable and snaps into its mate. .................................................................................................................................................................................................................................... Alcatel-Lucent – Internal Alcatel-Lucent 9768 MRO GL-2 Proprietary – Use pursuant to Company instruction 3MN-MRO-AWS-IMOP Issue 1 February 2014 Glossary .................................................................................................................................................................................................................................... lR A member of the Alcatel-Lucent lightRadio ™ family of wireless products. The MRO belongs to this family. LTE 3GPP Long Term Evolution wireless standard for high-speed data devices. Evolution implies that the air interface has evolved from GSM/UMTS standards to an OFDM-based air interface that realizes peak rates of 300 Mbps downlink and 75 Mbps uplink at less than 5 ms latency. See also 3GPP and OFDM. ................................................................................................................................................................................................................................... OFDM Orthogonal frequency-division multiplexing, the multi-carrier modulation scheme that overcomes many commonly experienced wireless communications problems, such as multipath and signal attenuation. ................................................................................................................................................................................................................................... PDCP Packet Data Convergence Protocol, which provides security to both the air interface and the fiber optic interface of the MRO by compressing and decompressing the IP headers, as specified in the UMTS protocol stack. ................................................................................................................................................................................................................................... Radiall The proprietary name of an enterprise that produces components for device interconnections. These components include the R2CT weatherized connector kit by which the MRO installer retrofits the LC fiber optic connector on the backhaul cable to the SFP port module of the MRO. The proper name of this company is Radiall USA, Inc. See also SFP. RoHS The Restriction of Hazardous Substances Directive, a law enacted by the European Union for enforcement by its Common Market in order to restrict six particular materials in electrical and electronic products. These materials are the elements lead, mercury, and cambium, and three compounds. More broadly, the standard QC 080000 propagates RoHS specifications throughout the world and thus impacts the choice of regions, nations, and states and provinces selected to regulate the same substances. The MRO is fully compliant with the RoHS directive. RRH Remote RF head consisting of a radio, a receive filter, a transmit amplifier, and a CPRI link to a BBU. The MRO is an RRH. See also BBU and CPRI. ................................................................................................................................................................................................................................... SFP A small form-factor pluggable module, which serves as the connector in the MRO for the fiber optic interface to the BBU. This module is an FRU. See also BBU and FRU. .................................................................................................................................................................................................................................... Alcatel-Lucent 9768 MRO Alcatel-Lucent – Internal GL-3 3MN-MRO-AWS-IMOP Proprietary – Use pursuant to Company instruction Issue 1 February 2014 Glossary .................................................................................................................................................................................................................................... SIMO Single input, multiple output. Its transmitter function uses a one antenna, and its receiver function uses two. This scheme reduces the instance of multipath and fading, in particular. Antonyms are MISO (multiple input, single output) and MIMO (multiple input, multiple output). ................................................................................................................................................................................................................................... VSWR Voltage standing wave ratio. ................................................................................................................................................................................................................................... W-CDMA Wideband code division multiplex air interface, used by UMTS-FDD. See also FDD. .................................................................................................................................................................................................................................... Alcatel-Lucent – Internal Alcatel-Lucent 9768 MRO GL-4 Proprietary – Use pursuant to Company instruction 3MN-MRO-AWS-IMOP Issue 1 February 2014 Index Numerics 9768 MRO ground points, 3-14 ................................................................................................ A Authority having jurisdiction (AHJ) definition of, GL-1 ................................................................................................ P Power factor, 2-2 frequency, 2-2 product conformance statements, A-1 ................................................................................................ ................................................................................................ D Depth, 2-3 T Technology, 2-1 Dimensions, 2-3 Distance human from 9768 MRO in operation, 1-4 ................................................................................................ ................................................................................................ W Wall-mount bracket depth, 2-3 Width, 2-3 F FCC guidelines for exposure to RF radiation, 1-4 Form factor, 2-3 ................................................................................................ H Handoff to another technology, 2-1 Height, 2-3 ................................................................................................ Install AC power cable, 3-19 Installation procedure, 3-2 Interface air, 2-1 ................................................................................................ M Mounting procedure, 3-2 .................................................................................................................................................................................................................................... Alcatel-Lucent 9768 MRO Alcatel-Lucent – Internal IN-1 3MN-MRO-AWS-IMOP Proprietary – Use pursuant to Company instruction Issue 1 February 2014 Index .................................................................................................................................................................................................................................... .................................................................................................................................................................................................................................... Alcatel-Lucent – Internal Alcatel-Lucent 9768 MRO IN-2 Proprietary – Use pursuant to Company instruction 3MN-MRO-AWS-IMOP Issue 1 February 2014
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Producer : GPL Ghostscript 9.0 Keywords : Modify Date : 2014:02:17 14:46:53-05:00 Create Date : 2014:02:17 14:45:01-05:00 Creator Tool : PDFCreator Version 1.2.0 Metadata Date : 2014:02:17 14:46:53-05:00 Document ID : a91c7907-9a67-11e3-0000-476fd433a98b Instance ID : uuid:38dfbb48-084e-4dae-ba11-d1681c9681fd Format : application/pdf Title : MRO AWS_UserMan_exh3 Creator : qy Description : Description (x-repair) : Page Count : 61 Author : qy Subject :EXIF Metadata provided by EXIF.tools