Nokia 9600C Users Manual 9500C GB

9600C to the manual cd13b280-3dc9-4ea1-a789-6ebb6f3a70a3

: Nokia Nokia-9600C-Users-Manual-349644 nokia-9600c-users-manual-349644 nokia pdf

Open the PDF directly: View PDF .
Page Count: 23

GB 1

Owner’s Manual

MEDIAMASTER

9600 C

GB 2

Important Information

Wiring the plug (UK and Eire only)

The mains lead on this product is already fitted with a non-rewireable (moulded) plug

incorporating a fuse, the value of which is indicated on the pin face of the plug. Should

the fuse need to be replaced, an ASTA or BSI approved BS 1362 fuse must be used of

the same rating, marked thus:

If the fuse cover is detachable always refit the cover after replacing the fuse. NEVER

use the plug with the fuse cover omitted. If the fitted plug is not suitable for your socket

outlets it should be cut off, after having first removed the fuse, and an appropriate plug

fitted in its place. If this new plug contains a fuse its value should be the same as that

removed from the non-rewireable plug.

The severed plug must be destroyed immediately to avoid the possible shock hazard

should be inserted into a 13A socket elsewhere.

If you need to replace the mains plug then follow the instruction given below:

The wires in the mains lead are coloured in accordance with the following code:

BLUE - Neutral (N); BROWN - Live (L).

As these colours may not correspond with the coloured markings identifying the ter-

minals in your plug, proceed as follows:

The wire coloured BLUE must be connected to the terminal marked with the letter N

or coloured BLUE or BLACK. The wire coloured BROWN must be connected to the

terminal marked with the letter L or coloured BROWN or RED. On no account either

of these wires to the terminal marked E or coloured GREEN or GREEN and YELLOW.

Before replacing the plug cover, make certain that the cord grip is clamped over the

sheath of the lead; not simply over the two wires.

If in doubt, consult a competent electrician.

We reserve the right to change specifications.

Please be aware that new software can change

the functionality of the Box.

GB 3

For your safety

•Keep a clear space around

the Mediamaster to allow

for sufficient ventilation.

•Do not cover the Media-

master or place it on a unit

that emits heat.

• Use a soft cloth and a mild so-

lution of washing-up liquid to

clean the casing.

• Nokia is proud to offer a high

quality product. To keep this

level of quality, service should

be carried out only at a Nokia

authorised service centre.

• Do not connect or modify ca-

bles when the Media-master

is plugged in.

• Do not remove the cover.

• Do not allow the unit to be ex-

posed to hot, cold or humid

conditions.

• Please note that the only way

to isolate the Mediamaster

completely from the 230 V

mains supply is to unplug the

mains lead!

The sky is the limit with your Mediamaster. It‘s easy to use, always at your command and adaptable

for future advances.

To begin with, you will find it necessary to read these instructions but you will soon find yourself com-

petent without them.

Contents

For your safety 3

Rear panel/Front panel 4

Installation 5

Connecting the Mediamaster to the TV set 5

Preparing the remote control 7

Remote control 8

About the Smart Card and CA Module 9

Basic Settings 10

The Welcome Menu 10

Viewing TV 11

Important general information 11

Start/stop watching TV 11

TV Guide 12

Volume level 13

List of TV channels and Radio channels 14

How to show the Main Menu 16

The TV Guide and Radio Guide 16

TV Channels and Radio channels 16

Parental Control 17

Installation 17

Common Interface 17

Cable Network settings 18

Channel Search 18

Create a Favourite List 19

Language Settings 19

System Settings 19

First time Installation 20

Glossary of terms 21

Technical Specifications 22

GB 4

Welcome

AUDIO L R

Stereo outputs

for connection

to a HiFi system

TV

SCART Connec-

tion to the TV set

AUX

Input SCART connection

for e. g. an analogue

satellite receiver or a

second Video recorder

(playback only)

VCR

for the ordinary

Video recorder

(record and playback)

0/12 VOLT

Not used

Mains lead

230 V AC

+/- 15%,

50 Hz

Rear panel

RS232

for a printer,

PC or a high

speed modem

to turn the receiver

on/off (standby)

Select channel

number, up/down

Display

shows programme information.

At start up, it displays software and boot/loader number

Front panel

SCSI

For a CD-ROM

player or other

high-speed data

equipment

Slot

for the CA Module

and Smart Card

ANTENNA

Connection to

the cable

network socket

TV / VCR

for an RF-cable

to the aerial

input of the TV

set or a Video

Recorder

GB 5

SCART cable

The box for your Mediamaster should contain the

following items:

• the Mediamaster

• a remote control handset with batteries.

• a fully featured SCART cable for connection to the TV set.

• Owner’s Manual.

Installation

About the SCART sockets

• On the back side the Mediamaster is equipped with 3 SCART

sockets (see figure). When you connect external sets to any

of theese sockets, always use fully featured SCART cables.

There are “slimmed” (=cheap) SCART cables on the market,

but it is not sure that e. g. your videorecorder will work OK with

some of these cables.

• SCART cables are also necessary to get stereo sound from a

stereo TV and video recorder.

SCART socket

56

123

4

789

0

EXIT

MENU

GUIDE

OK

TV

TEXT

As most local cable networks are distributing TV programmes

from both digital and analogue sources, the signals from the

wall outlet will be of two different kind:

1) Digital signal information to be handled by the Mediamaster.

These signals are sent to the TV through the SCART cable.

2) Analogue signals which are bypassed to the TV through a

RF cable.

Due to that you must connect the Mediamaster to the TV set

as described below.

• Connect the SCART cable between the TV SCART socket on

the back of the Mediamaster and the SCART input socket on

your TV.

• Connect the RF cable between the TV/VCR connection on the

Mediamaster and the ordinary areial socket on the TV set.

• You also must have another RF cable between the ANTENNA

input on the Mediamaster and the network socket.

Connecting the Mediamaster to the TV set

GB 6

Connecting to a TV and a video recorder

Refer to your video recorder manual for full instructions.

• Connect one SCART cable between the TV and the

TV SCART socket on the Mediamaster.

• Connect another SCART cable between the video

recorder and the VCR SCART socket on the

Mediamaster.

• A RF cable has to be connected between the

TV/VCR output on the Mediamaster and its corresponding

input on the Video recorder.

• Finally, connect another RF cable from the RF output on the

video recorder to the TV aerial input on the TV.

Connecting to an analogue satellite receiver and a video recorder

• Connect one SCART cable between the TV and the TV SCART

socket on the Mediamaster.

• Connect one SCART cable between the TV SCART socket

on the analogue satellite receiver and the AUX

SCART socket on the Mediamaster.

• Connect one SCART cable between the video

recorder and the VCR SCART socket on the

Mediamaster.

• Connect a RF cable from the RF output on the video recorder

to the TV aerial input on the TV.

• Connect a RF cable from the TV/VCR socket on the Media-

master to the RF input on the video recorder.

• Connect a RF cable from the aerial socket to the socket

marked ”ANTENNA” on the Mediamaster.

With Video recorder

Analogue receiver

VCR

Without the VCR, you should connect as shown

in the diagram to the right.

Analogue receiver

GB 7

Preparing the remote control

• Remove the cover on the battery compartment at the bottom

of the remote control handset.

• Insert the 2 x AAA (1,5 V) batteries, as shown in the diagram,

taking care to observe the + and - markings indicated inside.

• Replace the cover.

Connecting to a Hi Fi system

• Connect an RCA/Cinch stereo cable from the AUDIO L R sock-

ets on the Mediamaster to the LINE, AUX, SPARE or EXTRA

input sockets on your Hi Fi system.

You can now plug in the mains plug of the Mediamaster to the

wall socket.

• Switch on your TV set.

• When the Mediamaster is connected to the TV set, you will

now see a welcome message on the screen. You may now

proceed to page 10 “Basic Settings”.

However, we recomend that you read the other information

on the preceding pages first.

Switching on for the first time

Before you continue...

please read this concerning menus

A menu is a field of text shown on the TV screen. These menus

contain different kinds of information and give the possibility to

select between alternatives.

In the bottom part of the screen you will normally also have a

short explanation of your options.

A menu may contain several lines. Selectable lines are high-

lighted. Non highlighted lines are not selectable.

GB 8

To turn the Mediamaster on/off (standby).

Press once to switch to audio language/audio track

(if available). Press twice to switch to Radio mode.

TV To leave a menu and go back to watch a TV pro-

gramme. To switch from Radio Mode to TV Mode.

To toggle between terrestrial TV, VCR, analogue and

the digital satellite signal.

0 - 9 To select channel number and other numerical

commands.

GUIDE To obtain a list of present and coming programs for

the available channels. This information is only

shown if your Service Provider transmits pro-

gramme information.

MENU To display the ”Main menu” screen.

EXIT To go back one level in the menus.

To return to the Main Menu from a Submenu.

iTo give short and extended information (if transmit-

ted) about the current/next programme.

LEFT/RIGHT To move in left/right direction within the menus.

BUTTONS

UP/DOWN To move in an up/down direction in the menus.

BUTTONS To select TV and audio channels.

DOUBLE To step pages or change channels up or down in the

ARROWS menus. (In blocks of 10).

OK To confirm choices, etc.

Select TV/Radio channel list.

+ - To increase or decrease the volume level of the

Mediamaster. The Mediamaster’s maximum level is

controlled by the TV:s present volume setting. The

volume adjustment also alters the volume level to

your video recorder.

To turn the sound on /off (mute).

TEXT To select teletext information.

Press once to change teletext subtitle.

Press twice to enter teletext (if available).

Remote control

This section describes how to operate the Mediamaster using the buttons on the remote control.

Double arrow

UP

DOWN

RIGHT

Double arrow

LEFT

GB 9

About the Smart Card and CA Module

To be able to receive pay-TV channels you will need a CA Mod-

ule and a Smart Card from the Service Provider of your choice.

The Service Provider is the distributor of the programmes.

If you are subscribing to services from more than one Service

Provider, you might have to change between different CA Mod-

ules and Smart Cards.

Please note, that a smart card is connected to a single Service

Provider and due to this, a specific range of channels.

Only "free" channels are available without the Smart Card.

Note: The mains plug must not be plugged in before inserting

the CA module!

• Insert the CA module fully into the slot behind the lid in the

front panel of the Mediamaster so that the arrow on the

module faces upwards and inwards.

• Insert your card fully into the slot on the CA module, so that

the microchip (the yellow spot) faces upwards and inwards.

After inserting the card, leave it in the slot permanently. Do not

remove it again, unless your Service Provider asks you to do so.

This is important, because if your Service Provider wants to

download new information to the Mediamaster, the card has to

be in the slot.

Please note, that the CA module and the Smart Card may give

special menus not described in this Manual.

PIN Code

The card is loaded with a 4-numbered code, also called a PIN code

(Personal Identification Number). Normally the PIN code is 0000

or 1234.

The code is essential for the future extra services offered by the

Service Provider.

GB 10

Language selection

Select the desired language. This will define the language shown

in the menus. It will also select this language as the main lan-

guage in cases where more than one is transmitted for speech

and subtitling in movies.

The Welcome Menu

To install the Mediamaster properly you have to adjust a few set-

tings. You will always be guided by the information at the bottom

of the menus.

When you have finished the final part of the setup procedure you

can start watching TV channels and listen to Radio channels.

By now you should have the “Welcome Menu” on the TV screen.

Press the OK button to proceed.

Basic Settings

Channel Search

From the Channel Search menu the Mediamaster will automati-

cally search for TV and Radio channels digitally transmitted from

the Cable Network.

The search will be performed in a predetermined way, and all

channels found will be listed in two columns on the screen.

TV channels will be listed in one column, Radio channels in the

other.

Please note, that the search procedure may take a few minutes.

When the search procedure is finished the indication

“Ready. To watch TV press OK” will appear in the bottom part

of the menu.

When you press OK a new menu superimposed upon the TV pic-

ture appears, where you have the opportunity to adjust the

clock*). This is done with the UP/DOWN buttons, ±1/2 an hour

at a time.

Press OK and you are ready to watch TV.

*) This menu will only appear the first time you perform settings

from this Menu.

GB 11

Important general information

The following will describe the basic functions of your Media-

master during the watching of TV or listening to Radio channels

from the Mediamaster. Sometimes the information may not be

displayed as illustrated. Many of the functions described here are

dependent on the Service Provider and/or can only be used if they

are included in the transmitted programme information.

Please note, that during the Channel Search procedure, the

Mediamaster has downloaded ALL available channels. This may

include channels from various Service Providers, also those to

which you normally do not have access, (unless you have a Smart

Card from one of those Service Providers).

If you select a programme to which you do not have access, you

will get the message “No Smart Card” or “No Access” on the

screen.

IMPORTANT! To toggle between the digital and analogue chan-

nels from the Mediamaster you must use the TV button on the

Mediamaster remote control. (Both digital and analogue signals

are sent to the Mediamaster in the antenna cable).

During watching analogue programmes the Mediamaster display

will show the word “TV”. In this mode you select channels on

the TV the same way as before you installed the Mediamaster.

Viewing TV

Start/stop watching TV

To start the Mediamaster from stand-by mode, press the but-

ton, TV button or one of the number buttons on the remote con-

trol.

It is also possible to start by pressing the button behind the

lid on the front of the Mediamaster.

Put the Mediamaster into stand-by by pressing the button.

In stand-by mode the display will show the correct time.

During watching digital programmes the Mediamaster display will

show the name of the channel. In this mode you select TV chan-

nels with the Mediamaster remote control.

Ref. to the connection description on page GB 7.

Select Channel

Change channel with the numbered buttons or with the

up/down buttons on the remote control. You can also use the

buttons on the front panel of the Mediamaster.

GB 12

Programme Information. The “i“ Button

Every time you change channel you will receive information for

4-5 seconds about the current programme. This information in-

cludes: Channel number, name, title and time.

Press “i” while watching a channel. If your Service Provider trans-

mits programme information you will see:

Correct time;

A small amount of information for the current and next pro-

gramme. (Alternate between “Now” and “Next” with the left/

right buttons);

Name and number of the channel;

Finally the start and stop time for the programme.

From here you also can obtain information about other channels.

Select with the up/down buttons. If you stop on another chan-

nel number and press OK, you will exit the menu and return to

TV mode, but now on the new channel.

If you select “Next” on a programme line and press OK, you will

set a “Reminder” . This means, during watching TV, you will

be reminded when the “Reminder marked” programme starts.

If you press the “i” button once more, you will get extended in-

formation (if transmitted) for the current or next programme.

To exit the menu, press the TV or “i” button.

TV Guide

By pressing the GUIDE button you obtain access to the TV Guide

which will give the titles of the present programme on the differ-

ent channels. By pressing the Left or Right button you also can

obtain information for the next programme.

Use the Up/Down buttons to move the cursor to different pro-

gramme areas.

You can obtain extended information for a programme by press-

ing the “i” button.

If you select “Next” on a programme line and press OK, you will

set a “Reminder”. This means that, while watching TV, you will

be reminded when the “Reminder marked” programme starts.

Please note, that these features will only work if they are included

in the transmission from the Service Provider.

GB 13

The Radio button

Pressing the button once gives you a menu where you can

change the spoken language in the present TV programme.

(Only if more than one language is transmitted).

Pressing the button twice will lead to the specific Audio Chan-

nel mode. The display on your Mediamaster and on the TV

screen will show the name of the audio channel you are listen-

ing to.

While in audio mode, you can press the “i” button to get ex-

tended information (if transmitted) about the audio programme.

Return to TV mode by pressing the TV button or again.

Volume level

Increase or decrease the sound level by pressing the “+” and “-”

buttons.

A control bar will be displayed on the screen during level adjust-

ment. (The max. level for volume is the current volume setting

on the TV set).

Please note, that the volume adjustments also change the vol-

ume level to your VCR during recording.

It is possible to turn the sound on and off with the button.

Sound off is indicated with the same symbol on the screen.

If you turn the volume off with this button, it does not affect the

volume to the VCR during recording.

GB 14

Video recorder

With a Video Cassette Recorder (VCR) connected you can watch/

record video tapes*.

If your VCR is connected with a SCART cable and you press the

Start button on the VCR, the playback will start and interrupt the

TV programme from the Mediamaster.

To watch TV programmes again , press the TV button on the re-

mote control for the Mediamaster, or stop the VCR.

Please note, that during the recording of a programme, every-

thing shown on the screen will be registered! For example: If you

call up a Menu from the Mediamaster on the screen, the menu

will be recorded!

*Record/playback is possible if the Video Recorder is connected

to the VCR SCART on the Mediamaster. Only playback is pos-

sible if you connect the Video Recorder to the AUX SCART.

List of TV channels and Radio channels

During viewing TV or listening to Radio channels, you get a pro-

gramme list onto the screen by pressing the OK button.

If you have made yourself a favourite list of frequently visited

channels you can alter between “All channels” and “Favourites”

with the Left/Right buttons. (How to make a Favourite list will

be described further on in this Manual).

You can change to another channel by stepping with the UP/

DOWN buttons and then press the OK button.

To move faster (10 channels at a time) between channels you can

also use the double arrow buttons.

GB 15

Subtitling and Teletext. The TEXT button

Pressing the TEXT button once while watching TV will put a

menu on the screen where it is possible to change a subtitled lan-

guage. This is only possible if more than one subtitling language

is transmitted.

Exit the menu by pressing the TV button.

Pressing the TEXT button twice will give the teletext menu,

(if teletext is transmitted). Select pages with the number buttons

on the remote control.

You can also quickly step to the different subpage alternatives

shown in any page by pressing the LEFT/RIGHT buttons. Press

OK on a selected number, and the page will show up.

Analogue Receiver

If you have an Analogue Receiver connected and turn it ON, the

programmes from that receiver will be shown. With the TV but-

ton on the Mediamaster’s remote control you can toggle between

channels from the analogue receiver and terrestrial TV channels.

The display on the Mediamaster indicates TV during the watch-

ing of terrestrial channels, and SAT during watching of channels

from the analogue receiver.

When the analogue receiver is turned OFF, you can toggle be-

tween channels from the Mediamaster and terrestrial channels.

In this case the display on the Mediamaster indicates “TV” dur-

ing watching terrestrial channels, and the channel name during

watching programmes from the Mediamaster.

GB 16

How to show the Main Menu

Press the MENU button and you will get the Main Menu on the

TV screen. Press the TV button to leave the menu.

Submenus from the Main Menu

If you select one of the highlighted titles and press the OK but-

ton, a submenu will be shown on the TV screen.

From a submenu you can adjust settings to your own require-

ments.

Settings from the Main Menu

The TV Guide and Radio Guide

These guides will give you an overview of programme informa-

tion from the TV/Radio channels. Step to different channel num-

bers with the UP/DOWN buttons.

If you stop on a line and press OK, you will exit the menu and

enter the channel marked on the line.

Select information about the next programme with the RIGHT

button.

Use the “i” button to get extended information about a marked

programme.

(Please note, that information will only be shown if it is included

in the transmission).

TV Channels and Radio channels

TV/Radio Channels will show a list with the names of the differ-

ent channels.

If you have made yourself a favourite list of frequently visited

channels you can alter between “All channels” and “Favourites”

with the Left/Right buttons. (How to make a Favourite list will

be described further on in this Manual).

To move faster within the list, use the DOUBLE ARROW buttons.

Press OK to enter a marked channel.

GB 17

CD

From the CD menu you can control an external CD player con-

nected to the SCSI socket.

To use present and future CD-ROM applications, the player must

have the following features:

a) SCSI-2 connection

b) support one of the following standards: CD-XA / CD-ROM /

Video-CD / Photo CD

Installation

The Installation Menu lets you add or change settings already

made. More about this Menu follows in the chapter “Installation

Submenus” starting on the next page.

Parental Control

By pressing OK on the line “Parental Control” you will be re-

quested to enter your PIN code. (Personal Identification Code).

This code is set to 1234 by the factory. You will now get the menu

from where you can lock some functions in the Mediamaster.

Lock Receiver: If you select “Yes” you will have to enter your

PIN code to get access to channels from the Mediamaster.

Lock Installation Menu: Select “Yes” if you want to lock access

to the Installation Menu.

Lock Channel: First, to go to the channel you want to lock, than

enter this “Parental Control” menu and select “Yes” from this

line.

Everytime someone tries to enter locked functions, the message

“Please enter your PIN code” will appear on the TV screen.

Change PIN code: If you change the PIN code from the stand-

ard 1234, DO NOT FORGET IT! Without the code you do not

have access to the functions you have set from this menu!

Common Interface

(This line wil be highlighted only when a CA Module is mounted).

From here you will get access to information and menus con-

nected to the CA Module.

This information may vary a lot depending on the Service Provider.

Please see the documentation delivered together with your CA

Module.

GB 18

Installation

Select this Menu from the line “Installation” in the Main Menu.

The submenu will give you the opportunity to change the prefer-

ences performed during first time installation. You can also add

features that were not included from the first time installation.

Please note that helpful information for every line is given at the

end of the menu.

Installation Submenus

Cable Network settings

From here you can add more channels (if available) from the Ca-

ble Net by entering the necessary settings.

You use the number buttons on the remote control to enter the

frequence with 5 digits, and the Symbol Rate with 4 digits.

The “.” (point) will be automatically set.

Select Modulation with the Left/Right buttons.

The information you have to enter here you can get from the ca-

ble network contractor or from your landlord.

Frequency: Enter the specified frequence.

Symbol Rate: Enter the Symbol Rate.

Modulation: Select Modulation.

When this is done, press the OK button to proceed with the Chan-

nel Search procedure.

Channel Search

From here you can now and then make an extra search through

the whole Cable Net in order to find new added channels.

Edit Channels

From “Edit TV channels” and “Edit Radio channels” you can

change the order of the TV and Radio channels to your needs by

simply selecting and moving a channel to a new position.

You may also delete unwanted channels. Follow the instructions

in the menu.

GB 19

Language Settings

From here you can change the language for the menus, audio

language and subtitle language. Just follow the instructions given

at the bottom of the menu.

System Settings

Time Adjustment: Adjust the clock in steps of ± 1/2 hour.

Fullscreen/Letterbox: These alternatives may be used on a

normal 4:3 TV set. Fullscreen will fill up the whole TV screen but

lose some information in the edges.

Letterbox will give a larger picture.

Timeout Channel Info: Used to set the time in seconds for how

long the channel info on the TV screen will be shown.

Timeout Number Keys: The delay time within which you have

to press the next button.

Type of connected TV:

4/3 is for TV sets with normal screen

16/9 is for wide screen TV sets

Display Volume Indicator: Possibility to turn on/off the Volume

Indicator on screen.

Create a Favourite List

When you enter the line “Edit favourite list” in the Edit Channels

menu you will get a submenu from where you can create a “fa-

vourite list” containing e. g. the channels you most frequently

watch.

With the OK button, X-mark the channels you want to be included

in the list.

It is possible to make one list for TV channels and another one

for Radio channels. Select list with the Left/Right buttons.

(If you press the OK button during viewing TV or listening to ra-

dio channels, you will get the Channel list, where you now can

alter between “All Channels” and “Favourite Channels”. Ref. to

page GB 14).

GB 20

Symbols on the Mediamaster display

No TS No Transport Stream

= No signal.

Channel name.

Signal indicator.

A square means full signal.

? No function.

Err Error message.

UPGRADE

The Mediamaster is busy

downloading new software.

First time Installation

Will start the Installation procedure from the “Welcome Menu”.

When you enter the “Welcome Menu” again and press the

OK button, you should be aware of the fact that all previous

channels and settings will be erased! Press the EXIT button

to leave the menu without making any changes.

Receiver upgrade

If your Service Provider has a new software version available for

the Mediamaster, you can enter this menu and obtain informa-

tion.

If no software is available, you will get the message “No new

software available”.

During downloading periods you are prevented from changing

any settings. The display will show “UPGRADE” during a

download procedure.

IMPORTANT! The update procedure may take up to one hour!

DO NOT turn off the Mediamaster or disconnect the cable to

the antenna input during this procedure!!

GB 21

MPEG Moving Picture Experts Group

PIN code Personal Identification Number.

A four-digit code that is used for locking/unlocking, eg

with the parental control feature. Default value is nor-

mally 1234.

PSI Programme Specific Information

Parental control A feature that allows parents to "lock"

programmes that they consider unsuitable for children.

A "locked" programme can only be "unlocked" with the

special secret code (PIN code).

RF Radio frequency (known as HF in some coun-

tries).

RS 232 Serial data port

SCART A connector used for connection of e.g.

Mediamasters, video recorders and TV sets. Also

named Euroconnector or Peritel connector.

SI Service Information

Symbol rate Size of the digital package transmission

SW Soft ware

TS Transport stream

VCR Abbreviation for Video Cassette Recorder.

Glossary of terms

Access Authorisation to use the coding system to

purshase/order TV programmes.

Audio system With digital satellite reception, the

sound is transmitted in packages and is selected either

in a special audio mode or pre-selected by using instal-

lation set-up. This gives the opportunity to select be-

tween several different languages to a movie. Amount

of choices is dependent on what is available in the sig-

nal.

Coded satellite TV programme

Some satellite TV programmes are transmitted in en-

coded form; with black screen and no sound. A Smart

Card is needed to view such programmes.

DTH Direct to Home

DVC Digital Video Cassette

DVB Digital video broadcast

EPG Electronic Programming Guide, programme in-

formation about name, starttime etc.

GHz Abbreviation for GigaHertz. The prefix giga

means billion, and Hertz means cycles per second. Sig-

nals in the GHz range are often called microwaves.

MHz Abbreviation for MegaHertz. The prefix mega

means million, and Hertz means cycles per second.

GB 22

Transmission Standards

DVB, MPEG 2

RF input / Loop through output

Input connector IEC female

RF impedance 75 Ω

RF frequency 47 - 862 MHz

RF input power level 55 - 80 dB uV

RF impedance 75 Ω

Output connector IEC male

TV SCART

Video output 1 Vpp (±1 dB) / 75 Ω

Audio output 0,5 Vrms / RL >10 kΩ

RGB output Internal RGB or from

SATELLITE SCART

RGB bandwidth 6 MHz ±3 dB

Fast blanking output Internal RGB or from

SATELLITE SCART

Status output 0/6/12 V / RL 10 kΩ

VCR SCART

Video output 1 Vpp (±1 dB) / 75 Ω

Video input 1 V pp / 75 Ω

Audio output 0,5 Vrms / RL >10 kΩ

Audio input 0,5 Vrms / RL >10 kΩ

Status input 0/6/12 V / RL >10 kΩ

AUX SCART

Video input 1 Vpp / 75 Ω

RGB input Yes

Fast blanking input Yes

Audio input 0,5 Vrms / RL >10 kΩ

Status input 0/6/12 V / RL >10 kΩ

AUDIO R L

Connector 2 x RCA (R+L)

Output 0,5 Vrms / RL 10 kΩ

Low speed serial data (RS 232)

Connector 9-pin D-sub

Signals RS232, max. 19.2 kbit/s

Pin 1 not connected 2 RXD

3 TXD 4 Set to high

5 GND 6 not connected

7 RTS 8 CTS

9 not connected

SCSI

Connector 50 pol.

Signal SCSI-2 (max. 3,8 MB/s)

Front panel Display 8 character alphanumeric matrix,

5x7 pixels. Buttons:

,

(standby,

progr. number up and down)

General data

Article code The model code, variant and serial number,

are located on a label on the underside of

the housing.

Software Software version (V.x.xxx) and Boot version

(Bx.xx or Boot x.xx) are displayed in the

matrix display when the Mediamaster is

powered up.

Supply voltage 230 V AC ±15%, 50-60 Hz

Power consumption max 40 W

Power consumption in

standby 2 W

Working temperature +5° C to +40°

Storage temperature - 40° C to +65° C

Operating distance for

remote control max 10 meters

Dimensions (w x d x h) 380 x 240 x 65 mm

Weight 2,2 kg approx

The EMC Directive 89/336/EEC is applied to this product.

Technical Specifications

121

220

SCART-sockets

TV AUX VCR

1 Audio out right ch. - Audio out right ch.

2 - Audio in right ch. Audio in right ch.

3 Audio out left ch. - Audio out left ch.

4 Audio ground Audio ground Audio ground

5 RGB blue ground RGB blue ground -

6 - Audio in left ch. Audio in left ch.

7 RGB blue signal out RGB blue signal in -

8 Switch voltage out Switch voltage in Switch voltage in

9 RGB green ground RGB green ground -

10 - - -

11 RGB green signal out RGB green signal in -

12 - - -

13 RGB red ground RGB red ground -

14 Fast blank. ground Fast blank. ground -

15 RGB red signal out RGB red signal in -

16 Fast blanking out Fast blanking in -

17 Video out ground - Video out ground

18 - Video in ground Video in ground

19 Video out - Video out

20 - Video in Video in

21 Ground (casing) Ground (casing) Ground (casing)

GB 23

Nokia is a registered trademark of Nokia Corporation

66 76939-10 © 98 26

Mediamaster 9600 C