Noon Home N100 Smart Lighting System User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3572646
Application ID	zNzO9AjPt80g7HeqPpLVhw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	154.38kB (1929725 bits)
Date Submitted	2017-09-21 00:00:00
Date Available	2018-01-01 00:00:00
Creation Date	2017-04-14 11:40:56
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2017-09-15 17:33:02
Document Title	Users Manual
Document Creator	Adobe InDesign CC 2017 (Macintosh)

Getting Started
In the Box
Activity
Sensor
Dimmer
Buttons
Touch
Display
Dimmer
Light
Power
Switch
Test
Button
Power
Switch
On/off
Kick
On/off
Kick
Guidelight
Room Director
Extension Switch
Dimming Base
The Director is responsible for orchestrating all of the lights in a room.
Controlled by the Room Director for
coordinated lighting.
The Dimming Base replaces your old
light switches.
Click to turn all the lights on or off,
or swipe the glass display to beautifully
transition the lights in your room.
The Extension Switch can also be used
to change an individual light or use the
dimmer button to find the perfect level.
Plug in either the Room Director or
Extension Switch anywhere a Dimming
Base is installed.
How it Works
Press to turn lights
on or off.
Aliam, apedite mporio. Et porum sunte cone sedio
molupti ustiur autem incideseque evene moluptur ibea
ut mo offictatibus molorem quunda porum res et.
Swipe up/down to
change scenes
Press to
brighten lights.
Press to
dim lights.
Coordinated Lighting
Set a scene with just one touch to create the perfect
ambiance. Noon delivers expertly coordinated lighting
personalized for your home, and your life.
The Master Switch controls all the Extension Switches
and sets scenes for the whole room at once.
The Extension Switches control and dim individual lights.
A lighting designer.
Built in.
The Noon app acts like your own personal
lighting expert, helping you refine your
current scenes, or create all new ones to
fit the mood. You can also use it to turn
your lights on or off, and even find out if
a room is occupied so you don’t shut the
lights off on someone you love.
Magic Moments
Vacation Mode
Nightlight
Hands Free
Noon learns user behavior
over time and can mimic typical
lighting use while users are out
of the house.
The Room Director detects
motion at night, turning on
ultra-low lighting to keep users from
stumbling in the dark.
For hands-free control, Noon
can be enabled to automatically turn
lights on and off as users
move around the home.
Pro Install
Professional installation by a
certified electrician is recommended.
To book a Noon-preferred installer,
visit noonhome.com/install.
Before your installer comes,
make sure you have all of the Noon
switches and wall plates you need at
noonhome.com/store.
Do it Yourself
Comfortable with high-voltage wiring?
This kit contains all the parts you
need to install a Room Director and
2 Extension Switches*.
Visit noon.co/store to find out if you
have everything, and purchase extra
switches to complete your room.
*Included are three wall plates: 1-gang, 2-gang,
and 3-gang. If you need two additional 1-gang
wall plates, go to noonhome.com/purchase.
13
Need Help?
1-888-Noon-User
noonhome.com/support
26
Noon Smart Lighting System
NOON HOME
FCC ID: 2ALVN-N100
Model : N100, N130
IC: 22836-N100, IC: 22836-N130
User and Safety Guidelines
Product Terms of Use
For product terms of use, please go to https://www.locoroll.com
Basic safety
Please follow these suggestions and safeguards to decrease the chances of damage to your product,
accessories, or any connected devices, and to lessen the risk of harm or injury, such as from fire, burns, or
electric shock:
! Use the product for its intended purposes only.
! Do not open or take apart your product, adapter, or accessories.
! Do not crush, perforate, drop, throw, or try to deform your product, adapter, or accessories.
! Do not short external contacts or circuits, expose your product or adapter to open flames or lit
substances, or dispose of them in fire, solvents, or water.
! Do not use the product or adapter if they aren't working properly or have been damaged, cracked, or
dropped.
! Do not expose the product or adapter to water or other liquids.
! If the product or adapter gets wet, do not try to dry it using any household device such as an oven,
microwave, or hair dryer.
! Do not twist, pinch, or tie the USB cable.
! Some applications or prolonged usage may increase product temperature.
! If the product feels hot, discontinue use and close all applications or turn off the product until it cools.
! Ensure that the area around the product is adequately ventilated. Covering the product affects air flow,
which can trap heat and redirect it back to the product. This may affect product performance, and poses a
possible risk of fire or explosion, which could lead to serious bodily injuries or property damage.
Basic usage
When using, storing, or cleaning your product:
Do not use or store the product or adapter in very cold or hot environments.
Do not place the product near credit cards or key cards with a magnetic stripe.
Unplug the product and adapter before cleaning, during electrical storms, or when unused for extended
periods of time.
Use a clean, soft, dry cloth to clean the product and accessories.
Do not use any cleaning products to clean the product or accessories.
Some functions and services are not available in all areas and depend on your wireless plan and service
provider. Apps or services that send or receive data over a wireless network may incur additional fees
from your wireless service provider. Contact your wireless service provider for coverage maps, roaming
charges, and any other information about available wireless service plans and offerings.
FCC Regulations:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s
authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
RF Exposure warning
This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this
transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located
or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna
installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
IC Regulations:
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisee aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est susceptible d'en
compromettre le fonctionnement."
Radio Frequency (RF) Exposure Information
The radiated output power of the Wireless Device is below the Industry Canada (IC) radio frequency exposure
limits. The Wireless Device should be used in such a manner such that the potential for human contact during
normal operation is minimized.
This device has also been evaluated and shown compliant with the IC RF Exposure limits under mobile
exposure conditions. (antennas are greater than 20cm from a person's body).
Informations concernant l'exposition aux fréquences radio (RF)
La puissance de sortie émise par l’appareil de sans fil est inférieure à la limite d'exposition aux fréquences
radio d'Industry Canada (IC). Utilisez l’appareil de sans fil de façon à minimiser les contacts humains lors du
fonctionnement normal.
Ce périphérique a également été évalué et démontré conforme aux limites d'exposition aux RF d'IC dans des
conditions d'exposition à des appareils mobiles (antennes sont supérieures à 20 cm à partir du corps d'une
personne).

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2017:04:14 11:40:56-07:00
Creator                         : Adobe InDesign CC 2017 (Macintosh)
Modify Date                     : 2017:09:15 17:33:02+08:00
Has XFA                         : No
Language                        : en-US
Tagged PDF                      : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Metadata Date                   : 2017:09:15 17:33:02+08:00
Creator Tool                    : Adobe InDesign CC 2017 (Macintosh)
Instance ID                     : uuid:7a7a8a29-17b5-4629-84e3-d0820d53403d
Original Document ID            : xmp.did:debe88c8-abb6-4b13-8ab6-891ef3052e7f
Document ID                     : xmp.id:d787915c-2206-4fcf-ad53-5c2cec09cc7b
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:83e37336-22b7-4dc8-8e90-c4d9f04dbfe3
Derived From Document ID        : xmp.did:c5938126-6610-41f7-b52a-10e9fe7fc244
Derived From Original Document ID: xmp.did:debe88c8-abb6-4b13-8ab6-891ef3052e7f
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2017 (Macintosh)
History Changed                 : /
History When                    : 2017:04:14 11:40:56-07:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Count                      : 11

EXIF Metadata provided by EXIF.tools