Nortek Security and Control 2GIG ZWZB500 2GIG Z-Wave-Zigbee Module User Manual 2GIG ZWZB 500 Installation Instructions

Nortek Security & Control LLC/2GIG 2GIG Z-Wave-Zigbee Module 2GIG ZWZB 500 Installation Instructions

Users Manual

Nortek Security &Control | 1950 Camino VidaRoble, Suite 150 | Carlsbad, CA92008-6517 | USA | 800-421-1587 | www.nortekcontrol.comCopyright © 2017 Nortek Security &Control LLC.4NOTE: Any changes or modifications made to this device that are notapproved by 2GIG may void the authority granted to the user by theFCCto operate this equipment.Limited WarrantyThis product is warranted against defects in material and workmanship for one (1)year. This warranty extends only to wholesale customers who buy directly fromNortek Security &Control LLC or through Nortek Security &Control’s normaldistribution channels. Nortek Security &Control LLC does not warrant this productto consumers. Consumers should inquire from their selling dealer as to the natureof the dealer’s warranty, if any.There are no obligations or liabilities on the part of Nortek Security &Control LLCfor consequential damages arising out of or in connection with use or performanceof this product or other indirect damages with respect to loss of property, revenue,or profit, or cost of removal, installation, or re-installation. All implied warranties forfunctionality are valid only until the warranty expires. This Nortek Security&Control LLC Warranty is in lieu of all other warranties, expressed or implied.All products returned for warranty service require a Return Authorization Number(RA#). Contact Returns at 1-855-546-3351 for an RA# and other importantdetails.2GIG® Security & Automation System2GIG-ZWZB-500-ZigWave Module Integration Instructions 10016203 BIMPORTANTTo satisfy FCC/IC RF exposure safety requirements, a separation distance of 10 mm or more should be maintained between this device and person’s body(excluding extremities: hands, wrists, feet and ankles).As the Module Integrator, you must provide the following information on the hostdevice label:Contains FCC ID: WDQ-ZWZB500If space permits, include the following statement:This device has been tested and found to comply with the limits for a ClassB digital device, pursuant to Part 15 of FCC Rules.Operation is subject to the following two conditions: (1) This device maynot cause harmful interference, and (2) This device must acceptinterference received, including interference that may cause undesiredoperation.FCCPart 15: Class B Digital Device StatementFCC ID: WDQ-ZWZB500This device has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to Part 15 of FCC Rules. Operation is subject to the following twoconditions:1. This device may not cause harmful interference, and2. This device must accept interference received, including interference thatmay cause undesired operation.These limits are designed to provide reasonable protection against harmfulinterference in a residential installation. This equipment generates and can radiateradio frequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation. Ifthis equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one (1) or more of the followingmeasures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that towhich the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.As the Module Integrator, you must provide the following information in the host device manual:

Navigation menu