Nortek Security and Control 00150 2GIG Transceiver User Manual 2GIG XCVR 915 Installation Instructions
Nortek Security & Control LLC 2GIG Transceiver 2GIG XCVR 915 Installation Instructions
Users Manual
Nortek Security &Control | 1950 Camino VidaRoble, Suite 150 | Carlsbad, CA92008-6517 | USA | 800-421-1587 | www.nortekcontrol.com
Copyright © 2017 Nortek Security &Control LLC.
1
FCC Integration Instructions:
As the Module Integrator, you must provide the information below in the host
device users manual.
FCCPart 15: Class B Digital Device Statement
FCC ID: EF400150
This device has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference, and
2. This device must accept interference received, including interference that
may cause undesired operation.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one (1) or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
NOTE: Any changes or modifications made to this device that are not
approved by 2GIG may void the authority granted to the user by the
FCCto operate this equipment.
IMPORTANT
To satisfy FCC/IC RF exposure safety requirements, a separation distance of 10
mm or more should be maintained between this device and person’s body
(excluding extremities: hands, wrists, feet and ankles).
As the Module Integrator, you must provide the following information on the host
device label:
Contains FCC ID: EF400150
If space permits, include the following statement:
This device has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of FCC Rules.
Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) This device must accept
interference received, including interference that may cause undesired
operation.
Limited Warranty
This product is warranted against defects in material and workmanship for one (1)
year. This warranty extends only to wholesale customers who buy directly from
Nortek Security &Control LLC or through Nortek Security &Control’s normal
distribution channels. Nortek Security &Control LLC does not warrant this product
to consumers. Consumers should inquire from their selling dealer as to the nature
of the dealer’s warranty, if any.
There are no obligations or liabilities on the part of Nortek Security &Control LLC
for consequential damages arising out of or in connection with use or performance
of this product or other indirect damages with respect to loss of property, revenue,
or profit, or cost of removal, installation, or re-installation. All implied warranties for
functionality are valid only until the warranty expires. This Nortek Security
&Control LLC Warranty is in lieu of all other warranties, expressed or implied.
All products returned for warranty service require a Return Authorization Number
(RA#). Contact Returns at 1-855-546-3351 for an RA# and other important
details.
2GIG® Security & Automation System
2GIG-XCVR-915-Transceiver Intigration Instructions 10016204 C
Ethertronics ISM FPC antenna 1004137 is specifically designed to offer
uncompromised performances in a small environment for great coverage.
the 1003476 supports the long range/low power ISM/LoRa band 915 MHz.
Stays in Tune
Ethertronics antenna technology provides superior RF field containment,
resulting in less interaction with surrounding components. Ethertronics
antennas providing a robust radio link regardless of the usage position.
Part No.1004137
Embedded ISM FPC Antenna
915MHz
DATASHEET
Part No. 1004137
Product: ISM Antenna
902-928 MHz
Average Efficiency
60.1%
VSWR Match
2:1 Max
Peak
Gain
1.98 dBi
Feed Point Impedance
50 ohms unbalanced
Polarization
Linear
Power Handling
2 Watts CW
4/12/2017 Proprietary and confidential. www.ethertronics.com
ISM Embedded Antennas
based on Flexible PCB
ISM 915MHz Electrical Specifications
Typical Characteristics on customer unit,
Antenna is mounted directly on plastic material
Maximum
Dimensions
85.4x32.8x1.25 mm
(1.25mm high at cable solder connection)
Cable / Connector
MHF connector
Coax Cable diameter, 1.13mm, 112mm length
Mounting
using 3M Adhesive, and positioning holes
Mechanical Specifications
KEY BENEFITS
Reduced Costs and
Time-to-Market
Standard antenna eliminates
design fees and cycle time
associated with a custom solution;
getting products to market faster.
Greater Flexibility with
Unique Form Factors
Ethertronics’ technology helps you
deliver more advanced ergonomic
designs without adverse impact on
product performance.
RoHS Compliant
Ethertronics’ antennas are fully
compliant with the European RoHS
Directive 2002/95/EC.
APPLICATIONS
•M2M
•Automotive
•Healthcare
•Point of Sale
•Smart Metering
Typical VSWR and Efficiency
Antenna located in custom unit
© 2017 Ethertronics Incorporated. tel +(1) 858.550.3820 | fax +(1) 858.550.3821
email: info@ethertronics.com
5501 Oberlin Drive, Suite 100 San Diego, CA 92121 - USA
*All dimensions provided in this document are for informational purposes only.
ISM Band Ethertronics’ Embedded Antenna Specifications.
Below are the typical performances.
DATASHEET | Part No. 1004137
VSWR Efficiency
Mechanical Dimensions
Dimensions for reference only, in mm
0
10
20
30
40
50
60
70
80
90
100
850 860 870 880 890 900 910 920 930 940 950 960
Efficiency (%)
Frequency (MHz)
1
1.5
2
2.5
3
3.5
4
4.5
5
850 860 870 880 890 900 910 920 930 940 950 960
VSWR
Frequency (MHz)
Typical Radiation Pattern
Antenna located in custom unit, measured at 920MHz
Measured
at 920MHz