Nortek Security and Control 00161 Door / Window Sensor User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3789011
Application ID	curEoVbW/C3Jk6Z59yehhg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	28.32kB (354020 bits)
Date Submitted	2018-03-20 00:00:00
Date Available	2018-03-20 00:00:00
Creation Date	2017-06-05 11:56:20
Producing Software	Mac OS X 10.12.5 Quartz PDFContext
Document Lastmod	2018-02-16 15:50:29
Document Title	Users Manual
Document Creator	Google

Welcome to your
ADT Door and
Window Detector
1
1.
Setup
Take the ADT Door and Window Detector to where
you intend to mount it after setup.
•
Make sure you are within 350 feet from the
ADT Security Hub. (Exact range depends on your
home’s construction, environment, position of the
ADT Security Hub, and the position and number
of other connected devices.)
•
Make sure that your ADT Security Hub is disarmed
before connecting a new device.
Setup
2. Use the SmartThings app on your smartphone
to select the “My Home” tab. Select "Things", and
then “Add a Thing".
3. Remove the tab on the detector marked “Pull This
Tab”.
Battery Tab
2
Setup
4. Use the SmartThings app to scan the QR code on the
back of the detector and then follow the on-screen
instructions to complete setup.
Placement
Make sure that the alignment marks on both parts of the
detector are aligned and facing each other.
Detector (Back)
Detector
Alignment Marks
QR Code
5. Remove the QR code from the back of the detector
and attach it to this guide for future reference.
Magnet
Placement
Placement
Placement on doors:
Placement on windows:
Detector On Door Frame
Single-Hung Windows
Double-Hung Windows
Door Frame
Magnet Mounted On Door
Detector On Window Sill
3
1.
Mounting
Use the pre-applied adhesive tape when attaching
both parts of the detector to your door or window.
•
Make sure that all surfaces are clean and dry.
•
Make sure to place both parts of the detector
correctly as the adhesive tape will be difficult
to remove.
•
Place the detector at the top of door or window
frames to avoid accidental damage.
Mounting
2. Place one part of the detector on your door or
window, and the other part on the frame of the
door or window.
•
Make sure that both parts of the detector are less
than 0.5 inches apart when the door or window
is closed.
•
For double doors, attach the smaller part of the
detector to the most-used door and the larger
part to the least-used door.
•
If needed, adjust the height of the smaller part
of the detector by squeezing the tabs on the side,
or by adding the supplied spacer.
Mounting
Mounting
To add the supplied spacer:
1.
Insert spacer pin into magnet base slot.
Magnet
Spacer
2. Slide spacer forward to lock it onto the magnet.
Magnet
Spacer
4
Testing
You can test your ADT Door and Window Detector by
opening and closing the door or window where it's been
installed, and then checking its status on the ADT Security
Hub touchscreen or in the SmartThings app.
Note: If you have an ADT professional monitoring
service activated, make sure that your ADT Security Hub
is in Test Mode to avoid triggering a false alarm. See the
ADT Security Hub User Guide for more details.
1.
Troubleshooting
Press and release the button on the top of the
detector twice.
2. Press and hold the button. The red LED will begin to
blink quickly and after 5 seconds it will stay on.
3. Release the button and after another 5 seconds the
red LED will begin to blink slowly.
4. Use the SmartThings app to complete setup.
If you’re still having trouble connecting the ADT Door
and Window Detector, please visit SmartThings.com/
Support-ADT for assistance.
6
1.
Replacing Batteries
Replacing Batteries
Remove the cover by twisting a small flat screwdriver
or a coin in the slot on either end of the detector.
2. Remove the old battery and insert a new CR2450
battery. Be sure to install the battery with the + side
up.
3. Replace the cover.
Coin
Detector (Top)
Slot
Detector
CR2450 Battery
Detector (Bottom)
Using your
ADT Door and
Window Detector
Suggestions
The ADT Door and Window Detector monitors whether
doors and windows are open or closed. When the two
parts of the detector move away from each other, a
notification is sent wirelessly to your ADT Security Hub.
Your ADT Security Hub can then send an alert to your
smartphone, automate connected devices, or initiate
optional ADT professional monitoring services
(additional fees apply).
There are many ways you can use an ADT Door and
Window Detector in your home:
•
Put one on your door or window and set it to initiate
optional ADT professional monitoring services if an
intrusion is detected in your home (additional fees
apply).
Suggestions
•
Put one on your front door and set it to send you
a message if it’s left open for too long.
•
Put one on your door or window and set it to send
you a message if they’re left open at night.
•
Put one on your front door and set it to turn on
connected lights when you arrive home in the
evening.
•
Put one on your back door and set it to activate
a connected lock when it’s been closed for a few
minutes.
Note: To ensure proper functioning, all connected
devices must be configured correctly.
Visit SmartThings.com/Welcome for more ideas, tips,
and special offers.
Works With SmartThings
SmartThings works with a wide range of connected
devices, including lights, cameras, locks, thermostats,
and sensors. It also works with the Google Assistant
and Amazon Alexa so you can control your smart home
with voice commands.
Look for the Works with SmartThings label next time
you’re buying a connected device for your home, or visit
SmartThings.com to see the full list of compatible
devices.
SmartThings, Inc., 665 Clyde Ave, Mountain View, CA 94043, USA. Information in this document
is subject to change without notice. Revised 05/17. Copyright 2017 SmartThings, Inc. All rights
reserved. ADT and the ADT logo are marks and/or registered marks of ADT. Unauthorized use
is strictly prohibited. CA ACO7155, 974443, PPO17232; FL EF0001121; LA F1639, F1640, F1643,
F1654; MA 172C; NC Licensed by the Alarm Systems Licensing Board of the State of North
Carolina, 7535P2, 7561P2, 7562P10, 7563P7, 7565P1, 7566P9, 7564P4; NY 12000305615; PA
090797; MS 15019511. P/N 10015708.
Risk of Noise Induced Hearing Loss: The ADT Security Hub is equipped with a warning siren.
Exposure to high sound levels or prolonged exposure to the warning siren can result in Noise
Induced Hearing Loss (NIHL).
Avoid installing the SmartThings Hub
near or inside sources of metal, radio
or electromagnetic interference.
Health, Safety and Regulatory Guide
WARNING: No user-serviceable parts inside. Refer all
servicing to qualified service personnel.
IMPORTANT CONSUMER INFORMATION: Please read
before activating or using the device.
WARNING: This product contains chemicals known to the State of
California to cause cancer and reproductive toxicity. For more information,
please call 1-800-SAMSUNG (726-7864).
Safety Instructions
•
•
•
•
•
Read, keep, and follow these instructions. Heed all warnings.
Clean only with a dry cloth.
Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
Only use attachments and accessories specified by the Manufacturer.
Read our Product Usage Guidelines at: www.SmartThings.com/Guidelines.
Safety Instructions: ADT Security Hub
Limitations of Alarm Products: This product should be tested periodically to make sure it is working
properly. The product, if used properly, may reduce the risk of burglary, robbery, and other adverse
events that have the potential to result in injury or loss of life; however, the manufacturer is not an
insurer. This product is neither insurance nor a guarantee that such an event will be prevented, and
users should protect themselves with proper insurance. The manufacturer makes no representation
that this product cannot be compromised or circumvented, that it will provide an adequate warning,
or that it will prevent any personal injuries, property damage, or other losses. Like any alarm
product, it may be bypassed, it is subject to compromise, and it may fail to warn for a variety
of reasons, including, but not limited to:
•
•
improper installation or positioning; improper maintenance; tampering; dead or improperly
installed batteries; sensing limitations; component failures; receivers;
intrusions may be outside of a product’s designated range and certain environmental
conditions may impact performance, and audible alarm signals may be outside of hearing
range, muted by doors, walls, and floors, unheard by deep sleepers or the hearing-impaired,
or overwhelmed by other sounds.
Safety Instructions: ADT Detectors
•
•
Do not expose products to moisture or extreme temperature.
Make sure that products are used in a dry location and within the recommended operating
temperature:
⸰
⸰
⸰
⸰
⸰
⸰
⸰
•
•
ADT Security Hub: 32° to 120° F (0° to 49° C)
ADT Door and Window Detector: 32° to 120° F (0° to 49° C)
ADT Motion Detector: 32° to 120° F (0° to 49° C).
ADT Water Leak Detector: 32° to 104° F (0° to 40° C)
ADT Smoke Alarm: 32° to 104° F (0° to 40° C)
ADT Carbon Monoxide Alarm: 32° to 120° F (0° to 49° C)
ADT Keychain Remote: 32° to 120° F (0° to 49° C)
Make sure that the ADT Door and Window Detector is not positioned near metal or metallic
surfaces. Example: foil wallpaper.
The ADT Water Leak Detector is water resistant but not waterproof; avoid submerging it in water
or liquid to keep interior dry and to protect batteries. All other detectors should not be used
near water or exposed to dripping or splashing of any water or liquid.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED
BATTERIES ACCORDING TO THE INSTRUCTIONS.
Disclaimer
Some content and services accessible through this device belong to third parties and are protected
by copyright, patent, trademark and/or other intellectual property laws. Such content and services
are provided solely for your personal non-commercial use.
You may not use any content or services in a manner that has not been authorised by the content
owner or service provider. Without limiting the foregoing, unless expressly authorised by the
applicable content owner or service provider, you may not modify, copy, republish, upload, post,
transmit, translate, sell, create derivative works, exploit, or distribute in any manner or medium any
content or services displayed through this device.
US Certifications
Certified under FCC Part 15.
ADT Security Hub
Manufacturer Model : F-ADT-HUB-1
FCC ID : EF400150
Battery Type: Shenzhen Grepow Battery CO
LTD, MFG P/N: GLP823990
ADT Door and Window Detector
Manufacturer Model : F-ADT-DW-1
FCC ID : EF400151
Battery Type: 1 x CR2450 (Panasonic)
ADT Motion Detector
Manufacturer Model : F-ADT-PIR-1
FCC ID : EF400152
Battery Type: 1 x CR123A (Panasonic)
ADT Smoke Alarm
Manufacturer Model : F-ADT-SMK-1
FCC ID : EF400153
Battery Type: 2 x CR123A (Panasonic)
For each of the devices listed in the previous table, the following FCC statements
and information apply:
FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the
following conditions: (1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
FCC Caution
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this equipment.
ADT Carbon Monoxide Alarm
Manufacturer Model : F-ADT-CO-1
FCC ID : EF400154
Battery Type: 2 x AAA (Duracell)
Important Note: FCC Radiation Exposure Statement
To satisfy FCC radiation exposure safety requirements for the ADT Securty Hub, a separation
distance of 20cm or more should be maintained between this device and a person’s body
ADT Keychain Remote
Manufacturer Model : F-ADT-KEY-1
FCC ID : EF400155
Battery Type: 1 x CR2450 (Panasonic)
ADT Water Leak Detector
Manufacturer Model : F-ADT-WTR-1
FCC ID : EF400156
Battery Type: CR17345 (Panasonic)
This ZigBee Certified Product works with
ZigBee networks supporting the Home
Automation Profile.
Global 2.4 GHz wireless use.
ZigBee® Certified is a registered trademark
of the ZigBee Alliance.
Information to the User
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
Covered by one or more claims of patents http://sipcollc.com/patent-list/ and
http://intusiq.com/patent-list/.
Correct disposal of batteries in this product
(Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product, its electronic
accessories (e.g. charger, headset, USB cable), and batteries should not be disposed of with other
household waste.
To prevent possible harm to the environment or human health from uncontrolled waste disposal,
please separate these items from other types of waste and recycle them responsibly to promote the
sustainable reuse of material resources. Where marked, the chemical symbols Hg, Cd or Pb indicate
that the battery contains mercury, cadmium or lead above the reference levels in EC Directive
2006/66. If batteries are not properly disposed of, these substances can cause harm to human
health or the environment.
Household users should contact either the retailer or installer from which they purchased this
product, or their local government office, for details of where and how they can take these items for
environmentally safe recycling. Business users should contact their supplier and check the terms
and conditions of the purchase contract. This product and its electronic accessories should not be
mixed with other commercial wastes for disposal.
WARNING: Failure to follow these warnings and instructions can lead to heat generation, rupture,
leakage, explosion, fire, or other injury, or damage. Do not insert the battery into the compartment
in the wrong direction. Always replace the battery with the same or equivalent type. Never recharge
or disassemble the battery. Never place the battery in fire or water. Always keep batteries away from
small children. If batteries are swallowed, promptly see a doctor.
Always dispose and/or recycle used batteries in accordance with the hazardous waste recovery and
recycling regulations for your location. Your city, state, or country may also require you to comply
with additional handling, recycling, and disposal requirements.
CONSTANT EXPOSURES TO HIGH OR LOW TEMPERATURES OR HIGH HUMIDITY MAY REDUCE
BATTERY LIFE.
One (1) Year Limited Warranty
SmartThings, Inc. warrants this product (the “Product”) against defects in materials and/or
workmanship under normal use for a period of ONE (1) YEAR from the date of purchase by the
original purchaser (“Warranty Period”). If a defect arises and a valid claim is received within the
Warranty Period, then as your sole remedy (and SmartThings’ sole liability), SmartThings will at its
option either 1) repair the defect at no charge, using new or refurbished replacement parts, or 2)
replace the Product with a new product that is functionally equivalent to the original, in each case
within 30 days following receipt of the returned Product. A replacement product or part, assumes
the remaining warranty of the original Product. When a Product or part is exchanged, any
replacement item becomes your property and the replaced Product or part becomes SmartThings’
property.
Obtaining Service: To obtain warranty service, visit Support.SmartThings.com to speak with a service
agent or open a service request. Please be prepared to describe the Product that needs service
and the nature of the problem. A purchase receipt is required. The Product must be insured, and
shipped freight prepaid and securely packaged. You must contact support for a Return Material
Authorization Number (“RMA Number”) before shipping any Product, and include the RMA Number,
a copy of your purchase receipt and a description of the problem you are experiencing with the
Product. Any claim under this Limited Warranty must be submitted to SmartThings before the end
of the Warranty Period. Exclusions: This warranty does not apply to: a) damage caused by failure
to follow instructions relating to the Product’s use or the installation of components; b) damage
caused by accident, abuse, misuse, transport, neglect, fire, floods, earthquake or other external
causes; c) damage caused by service performed by anyone who is not an authorized representative
of SmartThings; d) accessories used in conjunction with a covered Product; e) a Product or part that
has been modified to alter functionality or capability; f) items intended to be periodically replaced
by the purchaser during the normal life of the Product, including, without limitation, batteries,
bulbs or cables; g) a Product that is used commercially or for a commercial purpose, in each case as
determined by SmartThings. EXCEPT FOR BODILY INJURY, SMARTTHINGS SHALL NOT BE LIABLE FOR
(I) ANY LOST PROFITS, COST OF PROCUREMENT OF SUBSTITUTE PRODUCTS, OR ANY INCIDENTAL
OR CONSEQUENTIAL DAMAGES, OR (II) ANY AMOUNTS IN EXCESS OF THE PURCHASE PRICE FOR
THE PRODUCT, IN EACH CASE WHETHER RESULTING FROM THE USE OF OR INABILITY TO USE THIS
PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, EVEN IF COMPANY HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION AND
EXCLUSIONS MAY NOT APPLY TO YOU. TO THE EXTENT PERMITTED BY APPLICABLE LAW,
SMARTTHINGS DISCLAIMS ANY AND ALL STATUTORY OR IMPLIED WARRANTIES, INCLUDING
WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
AND WARRANTIES AGAINST HIDDEN OR LATENT DEFECTS. IF SMARTTHINGS CANNOT LAWFULLY
DISCLAIM STATUTORY OR IMPLIED WARRANTIES, THEN TO THE EXTENT PERMITTED BY LAW, ALL
SUCH WARRANTIES SHALL BE LIMITED IN DURATION TO THE WARRANTY PERIOD. SOME STATES DO
NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE
LIMITATIONS MAY NOT APPLY TO YOU.
This warranty gives you specific legal rights and you may also have other rights, which vary from
state to state. To exercise your rights under this warranty, please follow the instructions above
under the heading “Obtaining Service”, or contact SmartThings at SmartThings, Inc., 665 Clyde Ave,
Mountain View, CA 94043, USA. Samsung is a registered trademark of Samsung Electronics Co.,
Ltd. Android is a trademark of Google Inc. Other marks are the property of their respective owners.
Device purchase subject to additional SmartThings terms and conditions.
Samsung SmartThings Use of Free and Open-Source Software
This document contains licensing information relating to the use of free and open-source software
(FOSS) with or within the Samsung SmartThings software. Any terms, conditions, or restrictions on
FOSS included within the Samsung SmartThings software that are not included within the original
FOSS licenses are offered and imposed by Samsung SmartThings alone. The authors, licensors, and
distributors of the FOSS disclaim all express or implied conditions, representations, and warranties
relating to the FOSS and any liability arising from use and distribution of the FOSS. A document
containing the complete and current list of FOSS packages used in Samsung SmartThings software
and mobile applications can be found here: www.SmartThings.com/FOSS
The document at the URL above identifies the FOSS packages used in the Samsung SmartThings
Hub software, the FOSS licenses that Samsung SmartThings believes govern those FOSS packages,
and copyright and license notices associated with Samsung SmartThings’ use of the FOSS. While
Samsung SmartThings has sought to provide complete and accurate licensing information for each
FOSS package, Samsung SmartThings does not represent or warrant that the licensing information
provided herein is correct or error-free. Recipients of the product have the option to investigate
the identified FOSS packages to confirm the accuracy of the licensing information provided herein.
Recipients are also encouraged to notify Samsung SmartThings of any inaccurate information or
errors found in these notices.
Certain FOSS licenses, such as the GNU General Public License, GNU Lesser (or Library) General
Public License, and Mozilla Public License, require Samsung SmartThings to make available to
recipients the source code corresponding to FOSS binaries distributed under those licenses. Users
who would like to download source code used by Samsung SmartThings under those licenses can do
so by logging in with their Samsung SmartThings account here: https://graph.api.smartthings.com/
foss_sources.
Users with questions or concerns regarding Samsung SmartThings use of Free or Open-Source
Software can contact us via email at: foss@smartthings.com
Deleting a Location (Home, Office, etc) in the SmartThings app will cause all Z-Wave devices to
be disconnected from the ADT Security Hub, requiring them to be excluded and re-included. Visit
Support.SmartThings.com for more information. P/N 10015713
SmartThings, Inc., 665 Clyde Ave, Mountain View, CA 94043, USA.
Revised 05/17. Copyright 2017 SmartThings, Inc. All rights reserved. P/N 10015713
ADT and the ADT logo are marks and/or registered marks of ADT. Unauthorized use is strictly
prohibited. CA ACO7155, 974443, PPO17232; FL EF0001121; LA F1639, F1640, F1643, F1654; MA 172C;
NC Licensed by the Alarm Systems Licensing Board of the State of North Carolina, 7535P2, 7561P2,
7562P10, 7563P7, 7565P1, 7566P9, 7564P4; NY 12000305615; PA 090797; MS 15019511.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2017:06:05 11:56:20-07:00
Creator                         : Google
Modify Date                     : 2018:02:16 15:50:29-08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.4-c006 80.159825, 2016/09/16-03:31:08
Metadata Date                   : 2018:02:16 15:50:29-08:00
Creator Tool                    : Google
Format                          : application/pdf
Document ID                     : uuid:31536272-c07a-48c8-bb48-a37be8c70e33
Instance ID                     : uuid:f4352bf1-9be6-43ec-9b4e-aeb27090d4cb
Producer                        : Mac OS X 10.12.5 Quartz PDFContext
Page Count                      : 13

EXIF Metadata provided by EXIF.tools